Vibe
Operating
Instructions
task/managerial
back height
place hand below the back,
gradually lift to desired height.
lift to top to allow back to drop
to start position.
arm position
push button and twist arm pad
until it clicks into the next
locking position.
arm width
seat height
push lever down to release, lift lever and use body weight
slide arm to desired position, to raise or lower the seat to
pull lever up to lock.
desired position, release lever
to lock.
The arm pad can also slide
backward or forwards along
it’s length.
arm height
push button and raise or lower
arm rest to the desired height.
release button to lock.
tension control
to increase the tension of
action, pull handle out and
turn clockwise. turning anticlockwise decreases tension.
seat depth
push button to release seat,
use body weight to slide seat
to desired position, release
button to lock.
forward seat tilt
pull out handle to increase the
forward stop point of the
synchro action by three
degrees.
syncro action
turn handle anti-clockwise to
release
action,
lean
backwards or forwards to
achieve desired position, turn
lever clockwise to lock.
for ‘dynamic posture’ the chair
may be left unlocked in its
‘free float’ mode.
the action has a safety
feature.when the action is first
unlocked, lean against back to
start the action.
care advice
Please regularly check that your chair’s components are complete and in good working
order and ensure that the chair is structurally sound and functioning properly.
Plastic components should be wiped with a soft cloth soaked in mild detergent and
warm water. Rinse thoroughly and dry with a soft cloth.
In order to maintain the fabric over the five year guarantee period, the upholstery must
be cleaned and vacuumed on a regular basis.
Please visit www.verco.co.uk for further information.
conference
tension control
to increase the tension of
action, pull handle out and
turn clockwise. turning anticlockwise decreases tension.
seat tilt
push lever down to activate
the seat tilt. use body weight
to adjust, pull lever up to lock
the seat in the desired
position.
seat height
lift lever and use body weight
to raise or lower the seat to
desired position, release lever
to lock.
OFFICE FURNITURE LIMITED
www.verco.co.uk