OverView MVL-721
Industry-standard 70” full HD 16:9 LED video wall
With the OverView MVL series, Barco has launched a display range
that has a well balanced set of essential features, perfectly fitting the
standard requirements. All this comes without any compromise in
quality, and with a special focus on limiting both the initial purchase
as the runtime cost.
The OverView MVL-721 is an easy to operate 16:9 LED-lit projection
module that has been designed to offer the typical detail, brightness,
and features in full HD resolution for control rooms where space is
not a constraint.
Unmatched LED lifetime
Barco’s unique cooling system significantly reduces the temperature of the LEDs.
This not only prolongs the lifetime of the LEDs (>80,000 hrs), but also allows for
durably higher brightness levels. The long LED lifetime guarantees a great uptime
and very low overhead costs. The latest LED technology ensures that the power
consumption is 30% lower than comparable products.
Comfortable viewing experience
To ensure good wall uniformity in terms of color and brightness levels, the
OverView MVL-721 comes with Barco’s Sense5 automatic calibration system. This
system works with an advanced color sensor that continuously measures the
primary color levels of the entire wall, and adjusts white point and color when
needed. This results in a significantly more accurate cube to cube uniformity, over
the complete runtime. Furthermore, the module’s robust structure makes the
OverView MVL-721 suitable for use in industrial environments.
on-screen: 350 Cd/m²
On-screen contrast
1,200,000:1 (dynamic)
Display technology
DLP rear projection
Color gamut
White point
6500k, 3200k fix
Brightness uniformity
Mid Gain Type, 180° viewing angle
Screen gap
< 1,5 mm | 0.06" (@25°C)
< 0.2 mm | 0.0079" (at higher temperatures)
Color stability
Self calibration with Sense5 based on advanced color sensor
Light source
Light source 6x redundancy for each of 3 LEDs
Light source lifetime
> 60,000h (typ.)
> 80,000h (eco)
MTBF LED: > 500,000h
Conditions for operation
10°C-40°C, 80% humidity (nc)
Input voltage
90 – 240 V, 50-60Hz
90W (eco)
150W (typ.)
180W (max)
Heat dissipation
310 BTU/h (eco)
510 BTU/h (typ.)
610 BTU/h (max)
Signal input/output
Dual link DVI in / Dual link DVI out
(Optional input redundancy)
Pixel clock
320 MHz
Input frequency
24 – 62 Hz
49 – 61 Hz
Signal processing
Loop through up to 10 cubes
Cropping / upscaling
Direct ethernet access
Built-in web server
Graphical user interface
All settings and operational parameters
Third party interface
WEB service API (optional)
2 years
Diagonal: 70"
Width: 1550 mm | 61.0"
Height: 872 mm | 34.3"
Depth: 1010 mm | 39.8"
Weight: 104 kg | 228 lbs
Last updated: 21 Jan 2018
Technical specifications are subject to change without prior notice. Please check www.barco.com for the latest information.