Symmetry™ S820 Proximity Wall Switch Reader

Symmetry™ S820 Proximity
Wall Switch Reader
www.amag.com
System Overview
The Symmetry S820 Proximity Wall Switch Reader reads
HID 125KHz proximity cards and is designed for
mounting on most standard electrical backboxes for ease
of installation.
The Symmetry S820 can be connected to the complete
multiNODE range of database and door controllers.
Unlike Wiegand interface readers, the Symmetry S820
uses secure, bidirectional, pseudo-random supervised
communications between the multiNODE controllers and
their associated readers. An alarm will sound if
communications are lost.
A distance from any of the multiNODE controllers to the
Symmetry S820 reader of up to 3000feet (1000m) can
also be achieved.
Features
• Designed to fit most standard electrical backboxes
• Reads HID 125KHz proximity cards
The Symmetry S820 has a typical read range of up to
3.5" (87mm) with HID Proxcard II.
• Typical read range of up to 3.5" (87mm) with HID
ProxCard II
The Symmetry S820 is available in three colors - ash
gray, charcoal gray and black.
• Visual indication via LEDs for card accepted and card
rejected
Other key reader features include LEDs for visual
indication of card accepted or card rejected and an
integrated buzzer for card read and door pre-held
warning.
The Symmetry S820 Proximity Wall Switch Reader is very
cost effective and comes with exceptional reliability and
consistent read range characteristics.
• Integrated buzzer for confirmation of card read and
door pre-held warning
• Secure, bi-directional, pseudo-random supervised
communications
• Rugged polycarbonate design with potted electronics
- ideal for both outdoor and indoor applications
• Lifetime warranty
The Symmetry S820 reader has fully potted electronics
and is ideal for both outdoor and indoor use.
The Symmetry S820 is warranted against defects in
workmanship for life (see our warranty policy for details).
AMAG Technology, Inc.
20701 Manhattan Place
Torrance, CA 90501
Phone: (800) 889-9138
Fax: (310) 834-0685
Website: www.amag.com
Symmetry™ S820 Proximity
Wall Switch Reader
Specifications
Model Types
Model Symmetry S820 - Card Only Wall Switch
Proximity Reader
• Available in ash gray, charcoal gray and black.
Power Requirements
• Nominal 12VDC (9-14V)
• Maximum current consumption 0.1 Amp
Communicating Distances
multiNODE-1000/multiNODE-2 SMD/multiNODE-2000/
multiNODE-2100/ multiNODE-2150 controllers
• to Symmetry S820 (current loop) = 3000ft/1000m
Operating Environment
• -13°F to +158°F (-25°C to +70°C)
• 0% to 95% Humidity, non condensing
Dimensions Inches (mm)
• Width = 3.1" (78mm)
• Height = 4.7" (120mm)
• Depth = 1" (26mm)
Approvals
Radio regulatory approvals to:
• FCC CFR47 Part 15.209
• EN 300 330 – 1 v1.3.1
EMC Type Testing
• EN50130-4
Access control product testing
• EN 50133-1:1
AMAG Technology Inc. is a subsidiary of Group 4 Technology Ltd.
©COPYRIGHT AMAG TECHNOLOGY INC. 2006
AMAG is a Microsoft Gold Certified Partner for Security Solutions. Symmetry is a registered trademark of Group 4 Technology Ltd. ENVS is a
trademark of Group 4 Technology Ltd. TLM is a registered trademark of Group 4 Technology Ltd. Microsoft is a registered trademark of Microsoft
Corporation. All other brand names and product names are trademarks or registered trademarks of their respective owners.
Information contained in this literature is representative only and does not form part of a contract. Our policy is one of continuous product
improvement and details may vary without notification. We are committed to providing defect-free products and services to our customers in
partnership with equally committed suppliers and authorized dealers.
9700-1042-09/06
AMAG Technology, Inc.
20701 Manhattan Place
Torrance, CA 90501
Phone: (800) 889-9138
Fax: (310) 834-0685
Website: www.amag.com