ACCESSORIES
Model AMS SYSTEM
Accessory Mounting System
ANYWHERE YOU NEED...
•
•
•
•
•
•
•
•
Customized Input/Output Connectors
Multiple Mounting Options
Label Track for Customized Lettering
Wide Range of Standard Jacks
Momentary or Latching Switches
LED Indication
Front Panel Level Control
Mounting in Rack or Tabletop Enclosures
You Need The AMS SYSTEM!
The AMS SYSTEM is a versatile product group from Radio Design Labs. The unique design allows the associated AMS
®
accessories to mount into any standard RDL RACK-UP or HALF-RACK mounting opening as well as other RDL mounting
accessories and enclosures. These optionally available RDL rack mount, wall mount and countertop enclosures make the AMS
SYSTEM accessories useful in a wide variety of installations.
APPLICATION: The AMS SYSTEM is comprised of a mounting frame (sold separately) and a variety of accessories that mount
in the frame. The accessories provide for a wide range of possible signal input/output connections, switching and control.
AMS-XLF
AMS-XLM
AMS-1/4F
AMS-1RC
AMS-2RC
AMS-BNC
AMS-SW2
AMS-PB1
AMS-LEDR
AMS-LEDG
AMS-LEDB
AMS-LEDY
AMS-10K
AMS-10KA
AMS-PJ1
AMS-FP1
Female, 3 terminal XLR with solder terminals (for mic or line level audio signals)
Male, 3 terminal XLR with solder terminals (for mic or line level audio signals)
Stereo ¼” Jack (for stereo headphones)
Single Phono Jack (for mono unbalanced audio or video)
Double Phono Jack (for stereo unbalanced audio)
BNC Jack (for video)
Rocker Switch (DPDT to control RDL modules or other industry equipment), 2 Amp
Momentary Pushbutton (SPDT to control RDL modules or other industry equipment), 2 Amp
LED Indicator (RED LED including current limiting resistor and terminal block)
LED Indicator (GREEN LED including current limiting resistor and terminal block)
LED Indicator (BLUE LED including current limiting resistor and terminal block)
LED Indicator (YELLOW LED including current limiting resistor and terminal block)
10 KΩ Potentiometer, knob and terminal block (Controls RDL and other industry VCAs)
10 KΩ Potentiometer, knob and terminal block (Audio taper, attenuates unbalanced audio)
Power Jack for 24 Vdc power (fits RDL power supplies equipped with plugs)
Filler Plate (covers unused accessory ports in the AMS-UF1)
Wherever installer customized jacks and controls are needed, the AMS SYSTEM is the ideal choice. Use the AMS SYSTEM with
available RDL mounting accessories and enclosures. Examples are: RDL RU-RA3, HR-RA2 or RC-1U rack mounts; RDL UC-1,
UC-2, the DC or SMB series or WDG1 counter or tabletop enclosures. The AMS system is ideal for use with other RDL modules
and products to form a complete audio/video system.
RDL • 659 N. 6th St. • Prescott, AZ., USA 86301 • (928) 443-9391 • FAX (928) 443-9392 • www.rdlnet.com
ACCESSORIES
Installation/Operation
Model AMS SYSTEM
Accessory Mounting System
Accessories
EN55103-1 E1-E5; EN55103-2 E1-E4
Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.
Available Mounting Options
RMS-4 ULTRASTYLETM
Wall-Mount Plate
(Fits North American
Electrical wall boxes)
AMS-UF1 Universal
Mounting frame
(Fits RACK-UP mounting
bays.)
AMS-HR6 Mounting panel for
6 AMS Accessories
(Fits HALF-RACK mounting
bays.)
D/DS-D2 Single plate for
AMS-Accessories
(Fits North American
Electrical wall boxes)
D/DS-D1 Single plate for
AMS-Accessories
(Fits North American
Electrical wall boxes)
AMS-EM1 45 mm square
adapter plate
(Fits European Modular
mounting frames)
TYPICAL PERFORMANCE
Accessory Mounting:
Finish:
891-3155G
#6 Screws with combination spline/straight heads (included with accessories)
RDL Black
Radio Design Labs Technical Support Centers
U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
Download PDF
Similar pages
ACCESSORIES Installation/Operation Model RU-SMA1
pm 20h
sas rc8
www.rdlnet.com
Data Sheet
RACK-UP ™ SERIES
sys cs1
dra 35p
ACCESSORIES Model AMS SYSTEM Accessory Mounting System ANYWHERE YOU NEED...