Description
X-Viper Modular 550W 80+ Bronze Active PFC 14CM FDB Fan Single Rail
Powercool is Proud to announce the launch
of its Ultra-silent X-Viper Series, which
contains an ultra-silent "Fluid Dynamic
Bearing" (FDB) fan as its major cooling
component. FDB fans offer better airflow,
allowing for better ventilation. The average
FDB fan has a long lifespan (100K hrs.),
whilst staying virtually silent for more than 2
years.
The X-Viper Series has been awarded the
80+ Bronze certificate across the range, and
is also ERP Lot6 ready (+5VSB consumption
<1W). The single +12V rail on the X-Viper
Series allows the use of high end graphics
cards, whilst giving greater stability to your
PC.
With the addition of the modular version of
the X-Viper Series, this allows for greater
flexibility, due to you being able to use only
the cables required for your PC.
Key Features
Support - Compliance with newest Intel standard ATX 12V, V2.2, V2.91, EPS12V
Efficiency - 85% at typical
MTBF > 100,000 hrs
Cooling System - Smart brand new 140cm Fluid Dynamic Bearing (FDB) Fan with intelligent
Fan Control (800RPM ~1500RPM)
Protection - Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power
Protection (OPP), Over Temperature Protection (OTP) & Short Circuit Protection (SCP)
Stand-by mode consumption < 1W meets U.S.A Energy Standards/ EuP (Energy-using
Products) instructions.
Smart Modularized Cable Management for better airflow by reducing cable clutter within
built system & increasing heat removal
Key Components - The X-Viper uses Taiwanese-Manufactured Major Components for
better quality and steady electrical support.
Double EMI Filter - for electromagnetic protection
PSU Specifications
AC INPUT: 110V~240V 8A at 110V, 4A at 240V 50/60Hz
DC
Output
Max
+3.3V
24A
+5V
15A
+12V1
42A
550W
-12V
0.5A
+5VSB
3A
Connectors
20+4 Pin Main Connectors:
1
4+4 Pin 12V Connectors:
1
SATA Connectors:
6
4-Pin Molex Connectors:
4
6+2 Pin PCI-e Connectors:
2
Floppy Drive Connectors:
1
Detailed Specifications
Dimensions: 158mm x 86mm x 150mm (W x H x D)
Input Voltage: 110V~240V
Input Current: 8A at 110V, 4A at 240V
Input Frequency
60/50Hz
Range:
PFC: Active PFC (>.99)
Power Good
100-500 ms
Signal:
Hold Up Time: >17ms
Efficiency: 85% Typically
MTBF: > 100,000 Hours
Protection: OVP/UVP/OPP/OTP/SCP
Power: 550W
Operation Temperature: 0~50°C
Safety: CE / FCC / UL / TUV
Cooling: 140mm Fluid Dynamic Bearing fan
Noise: < 21 dBA
80 Plus Certified: Yes - 80 Plus Bronze
Certification:
nVidia SLi Certified
ATi Crossfire Certified