4K OLED Master Monitor
30“ 4K OLED Reference Monitor - For Color Critical, Quality Control Operation of HDR/SDR 4K&HD production
Main Features
• BVM Grade OLED Panel
• Full 4K 4096 x 2160 Pixel Resolution
• Accurate black and color reproduction
• Extremely wide viewing angle
•Supports DCI P3 and ITU-R BT.2020 wide color spaces*1
•Gamut Marker (ITU-R BT.2020 colors outside 709 or
• Auto White Adjustment
• Quick input setting recall (Color space, EOTF, etc.)
• Quick Response
•High Dynamic Range (S-Log 3, S-Log 3(Live HDR)*2,
ITU-R BT.2100(HLG)*3, SMPTE ST.2084)
• Sony S-Log Gamma Support
• Multi-format capability
• Versatile 4K/QFHD Input Capability
•3G-SDI Quad-link up to 4096 x 2160/48p 50p 60p,
YCbCr 4:2:2 10-bit
• HD-SDI Dual-link and 4K/2K XYZ signals
• Faster access to the status menu page*2
• Relative Contrast 1/2, 1/3, 1/4*2
• Flicker free mode
• Interlace mode
• Safe & Area Marker
• Power-on Setting
• User Presets
• Password Lock for User Preset
• Key Inhibit
• User-friendly Built-in Control Pane
• BKM-16R and BKM-17R control
*1 The BVM-X300 does not cover the BT.2020 color space in full.
*2 Supported from V.2.0.
*3 Changed from V.2.1.
Supports DCI P3 and ITU-R BT.2020 Wide
Color Spaces
HDMI (HDCP2.2) and 3G-SDI Quad-link up
to 4096 x 2160/48p 50p 60p, YCbCr 4:2:2
Rear connector panel
SDI inputs
SDI Outputs (Switched out)
SDI 2 IN (SDI2 input)
connectors (BNC)
LAN (10/100)
Audio output
(Future support)
(Stereo Mini Jack)
Picture Performance
Picture size (diagonal)
Effective Picture size (H x V)
Resolution (H x V)
Pixel efficiency
Panel drive
Panel frame rate
Viewing angle
(panel specification)
Color temperature
Standard luminance
Color space (color gamut)
Transmission Matrix
OLED panel
750.2 mm (29 1/2 inches)
663.6 x 349.9 mm (26 1/4 x 13 7/8 inches)
4096 x 2160 pixels
17 : 9 (1.89 : 1)
48 Hz / 50 Hz / 60 Hz (48 Hz and 60 Hz are also
compatible with 1/1.001 frame rates)
89°/89°/89°/89° (typical)
(up/down/left/right contrast > 10:1)
D55, D61, D65, D93, DCI*4, and user 1-5
(5,000 K to 10,000 K adjustable), DCI XYZ
100 cd/m2 (100% white signal input)
ITU-R BT.2020*5, ITU-R BT.709, EBU, SMPTE-C,
DCI-P3, BVM-X300 Native*6, S-GAMUT3,
ITU-R BT.2020 (Non-constant luminance is
supported), ITU-R BT.709
2.2, 2.4, 2.6, CRT, 2.4 (HDR), S-Log3 (HDR),
S-Log3 (Live HDR), S-Log2 (HDR), SMPTE ST 2084,
RGB(SG 1.2), ITU-BT.2100(SG 1.2)
Serial remote (LAN)
BNC (x4)
Input impedance: 75 ohms unbalanced
HDMI(HDCP2.2) (x1)
Ethernet (10BASE-T/100BASE-TX), RJ-45 (x1)
BNC (x4), switched out*7
Input impedance: 75 ohms unbalanced
Audio monitor
Stereo mini jack (x1)
Stereo mini jack (x1)
Power requirement
AC 100 V to 240 V, 2.8 A to 1.2 A, 50/60 Hz
Power consumption
Approx. 280 W (max.)
Approx. 150 W (average power consumption in
the default status)
Operating temperature
0°C to 35°C (32°F to 95°F)
Recommended: 20°C to 30°C (68°F to 86°F)
Operating humidity
30% to 85% (no condensation)
Storage / transport
-20°C to +60°C (-4°F to +140°F)
Storage / transport
0% to 90%
Operating / storage /
transport pressure
Dimensions (W x H x D)
Supplied accessories
700 hPa to 1060 hPa
742.4 x 479.5 x 205 mm
(29 1/4 x 19 x 8 1/8 inches)
16.2 kg (35 lb 12 oz)
AC power cord (1), AC plug holder (1),
CD-ROM (1), Before Using This Unit (1), HDMI cable holder (1), European Representative (1)
*4 DCI: x=0.314 y=0.351
*5 The BVM-X300 does not support the ITU-R BT.2020 color space in full.
*6 The BVM-X300 individual chromaticity points. The widest color space setting of the signal is reproduced by the BVM-X300.
*7 The last selected SDI form SDI 1 or SDI 2 input signal are output.
©2017 Sony Corporation of Hong Kong Ltd. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features, design, and specifications are subject to change without notice.
The values for mass and dimension are approximate.
Version: 102017-AR-V2
Download PDF
Similar pages