PlAstiC PiPe tools - Reed Manufacturing

WATER SERVICE TOOLS & MACHINES
Plastic
PIPE Tools
SECTION
Quick Release™ Tubing Cutters for Plastic
Scissor Shears
Ratchet Shears
Plastic Pipe Saws
Internal Pipe Cutters
Clean Ream Extreme™
Solutions Kits
PE Pipe Peelers
Flare Tools for PE Water Service Lines
DEB1 Series Deburring Tools for Plastic Pipe
DEB4 Deburring Tool
Cone Deburring Tool
PEX Crimpers
Pipe Bevelers
Chamfer Tools Drill-Powered
Universal Pipe Cutters for PE
PLAS In-Line Rotary™ Cutters
PLAS Hand-Over-Hand Rotary™ Cutters
Guillotine Pipe Cutters
PE Squeeze-Off Tools
Grounding Accessory
Static Discharge Alarm
Plastic Pipe Joiners
PPR300 Plastic Pipe Fitting Reamer shown with
operator-supplied drill on Schedule 40 3” PVC pipe
fitting. Drill powers the reamer to effectively
clean-out the original fitting and cement residue
allowing for reuse of the fitting.
24
Plastic Pipe Tools
2
Quick Release ™ TUBING Cutters FOR PLASTIC
FEATURES
•Best tracking, easiest cutting tubing cutters available.
• With a simple wheel change, Quick Release™ cutters can be used for a variety of plastic or metal pipe.
•Replace worn cutter wheels for faster and easier cuts.
Reed Quick Release™ tubing cutters are the industry standard; most recommended by
plastic pipe companies and most imitated by other manufacturers. Quick Release™ tubing
cutters for plastic are the best cutters for small, medium and large diameter work and
feature sliding bars now with magnesium for added strength. They cut clean and square
with very little burr. Additionally, field reports indicate that Quick Release™ Tubing Cutters
with Reed OP2 or 30-40P cutter wheels are well-suited for use on ABS pipe.
Capacity
Length
Weight
Item
Code actual actual
O.D. in O.D. mm in mm lbs kg
Catalog
No.
Wheel
Material
Cut
TC1QP*04110
/8 - 1 /16 3 - 33
6 152 0.6 0.3
OP2
PE, PP, ABS, PEX
1
TC1QPVC*04114
/8 - 1 5/16 3 - 33
6 152 0.6 0.3 1-2PVC
PVC, CPVC, ABS
1
TC1.6QP*04116
/4 - 1 5/8 6 - 42 6.5 165 0.8 0.4
OP2
PE, PP, ABS, PEX
1
TC1.6QPVC*04118
/4 - 1 5/8 6 - 42 6.5 165 0.8 0.4 1-2PVC
PVC, CPVC, ABS
1
TC2QP*04120
/4 - 2 5/8 6 - 67
8 203 1.2 0.5
OP2
PE, PP, ABS, PEX
1
TC2QPVC*04124
/4 - 2 5/8 6 - 67
8 203 1.2 0.5 1-2PVC PVC, CPVC, ABS
3
TC3QP04130
/8 - 3 1/2 10 - 90 11 279 2.5 1.1 30-40P
PE, PP, ABS
3
TC3QPVC04134
/8 - 3 1/2 10 - 90 11 279 2.5 1.1 3-6PVC
PVC, CPVC, ABS
3
TC3Q6QP04138
/8 - 3 1/2 10 - 90 11 279 2.5 1.1
6QP
THICK PE
TC4QP
041401 7/8 - 4 1/2 48 - 114 12 305 2.8 1.3 30-40P
PE, PP, ABS
TC4QPVC
041441 7/8 - 4 1/2 48 - 114 12 305 2.8 1.3 3-6PVC
PVC, CPVC, ABS
TC4Q6QP
041481 7/8 - 4 1/2 48 - 114 12 305 2.8 1.3
6QP
.55 THICK PE
TC5QP*
041502 1/2 - 5 63 - 125 13 330 3.0 1.4 30-40P
PE, PP, ABS
TC5QPPR 041532 1/2 - 5 63 - 125 13 330 3.0 1.4 TC56QPP-R PP-R including Aquatherm®
TC5Q6QP
041522 1/2 - 5 63 - 125 13 330 3.0 1.4
6QP
.55 THICK PE
TC5QPVC* 041542 1/2 - 5 63 - 125 13 330 3.0 1.4 3-6PVC
4” C900
TC6QP
04160 4 - 6 5/8 102 - 168 15 381 3.9 1.8 30-40P
PE, PP, ABS
TC6QPVC
04164 4 - 6 5/8 102 - 168 15 381 3.9 1.8 3-6PVC
PVC, ABS
TC6Q680PVC 04125 4 - 6 5/8 102 - 168 15 381 3.9 1.8 680PVC
PVC-HVY WALL
TC6Q6QP
04168 4 - 6 5/8 102 - 168 15 381 3.9 1.8
6QP
.55 THICK PE
TC6Q80P
04123 4 - 6 5/8 102 - 168 15 381 3.9 1.8
80P
.75 THICK PE
TC8QP*
041706 1/4 - 10 159 - 254 26 660 8.0 3.6
80P
ABS, PE, PP, PVC**
TC8QPL*
041716 1/4 - 10 159 - 254 26 660 8.0 3.6
80P
.75 THICK PE
TC8Q680PVC* 041726 1/4 - 10 159 - 254 26 660 8.0 3.6 680PVC
PVC-NYLON
NEW *EXCLUSIVE SIZES
*Features spare cutter wheel in knob. TC1QP, TC1QPVC, TC1.6QP, and TC1.6QPVC have spare “O” wheel.
TC2QP has “OP2” wheel, TC2QPVC has “O” wheel.
**TC8QP comes with a cradle and parting blade for cutting thick plastic pipe. The parting blade can cut
to a depth of 1 1 /2 inches (38.1 mm) on plastic pipe.
NOTE: To cut Aquatherm® PP-R pipe, order Cutter Wheel #04159 with the TC5Q, TC6Q or TC8Q cutter.
Quick Release™ Tubing Cutters (for metal) on p. 11
cutter wheels ON P. 7 - 9
1
TC4QP
SIZES
TRAINING
Cradle
Parting Tool
TC8QP
5
Great for use on
ABS pipe!
TC8QPL
TC3QPVC
in use
Quick Release™ tubing cutters were
invented by Reed and cover capacities
up to 10'' (254 mm). First used by Reed,
the ball detent wheel pin makes cutter
wheel change easy. Reed has the best
cutter wheels specifically designed for
all plastic applications.
Scissor Shears
FEATURES
•Ideal for cutting thin wall and small diameter plastic, rubber or nylon tubing.
•Includes an industrial-grade, non-stick blade for best performance.
•For safety and ease of operation, use Scissor Shears with blade on bottom.
Scissor Shears squeeze together for fast cutting of small diameter PE, PEX, thin wall PVC
pipe, rubber or nylon tubing. Rotate scissor shears around tubing while squeezing handles
together for the best cut. All models feature ribbed handles for more secure hold along with
fiberglass strengthened nylon construction. Blade design maintains its sharp edge for long life
and exact cuts. SC1 and SC125 industrial-grade blades are non-stick coated with a surface
lubricant which lets blades slice smoothly through cut area.
Catalog
No.
Item
Code
SC1
SC125
Capacity
actual
actual
O.D. in
O.D. mm
04174 1.3
04178 1.7
32
42
Length
in
mm
Weight
lbs
Item Code
Non-Stick Blade
Handle
Ribs
kg
8.25 210 0.30.1
8.5 216 0.30.1
REPLACEMENT BLADES
Catalog No.
SC1
Description
SC125
SC1B
94170
High Carbon Steel Blade fits SC1, SC1SL, SC1SS
SC125B
94169
High Carbon Steel Blade fits SC125, SC125SL
NOTE: Scissor Shears are NOT RECOMMENDED to cut PVC or CPVC for solvent cement weld
connections. Instead use Quick Release™ Tubing Cutters FOR PLASTIC above.
25
2
www.reedmfgco.com
Plastic pipe tools
Ratchet Shears
Ratchet
Mechanism
RS2
RS1PLT
RS1
Broader base and 7-step ratcheting
mechanism on RS1/RS1PLT models
mean square cuts are easily attained
with minimal clearance.
FEATURES
•Ratchet Shears are ideal for cutting PE, PEX, PP and ABS pipe and tubing.
•Smoothest ratchet action for easiest cuts.
•Replace or resharpen blades for longer tool life and faster cuts.
Ratchet shears with hardened steel blades are ideal for cutting PE, PP, PEX and ABS pipe.
RS1PLT, RS7290, RSP1 and RSP2 ratchet shears offer the thinnest blades with a finish that
moves them smoothly through pipe. Due to its long handles that add leverage, the RS2 is
good for cutting up to 2” pipe. One-hand models RS1 and RS1PLT offer a 7-step ratchet
mechanism for best mechanical advantage and smoothest operation. RS1PLT is unique with
a corrosion-resistant, nickel-plated, steel blade which makes it a good choice for corrosive
environments. Pointed blade in one-hand model RSP1 and RSP2 helps start the cut in tough
plastics and helps avoid bounce in thin wall material. The two-hand RS2 features 2” capacity,
extra wide, v-style jaws for easy alignment, and long handles for leverage on tough-to-cut
pipe. RS7290 are one-hand style, 2” capacity ratchet shears. All ratchet shears’ blades can
be easily sharpened or replaced, enhancing performance and saving money. These tools are
not disposable and perform better, longer, and for less money over the tool’s lifetime.
Catalog
No.
RSP2
FEATURE
Item
Code
RS104176
RS1PLT* 04175
RS2 04177
RS729004182
RSP104276
RSP204277
NEW
*EXCLUSIVE FEATURE
Catalog No.
Blade Point
RSP1
RS7290
Capacity
actual
O.D. in
Length
Weight
actual
O.D. mm
in
mm
lbs
kg
42
42
63
63
42
63
8.3
8.3 17.0
13.25
8.75
11.5
210
210
440
337
222
292
0.8
0.8 2.8
2.4
0.9
1.56
0.4
0.4
1.3
1.1
0.4
0.7
1.66
1.66
2.4
2.4
1.66
2.5
REPLACEMENT BLADES
Item Code
Description
RS1B
94175
RS1 Hardened Steel Blade
RS1BPLT
94180
RS1PLT Nickel-plated Steel Blade
RS2B
94176
RS2 Hardened Steel Blade
RS7290B
94555
Blade fits Reed RS7290 and Wheeler® 7290
RSP1B
94276
RSP1 Stainless Steel Blade
RSP2B
94277
RSP2 Hardened Steel Blade
NEW
NOTE: Ratchet Shears are NOT RECOMMENDED to cut PVC or CPVC for solvent cement weld
connections. Instead use Quick Release™ Cutters for Plastic on p. 25
Plastic Pipe Saws
PPS20
PPS24
PPS18
FEATURES
•Cuts ABS, CPVC, PVC including C900 and larger diameter plastic such as 6” and 8” sewer pipe.
•Ergonomic-designed handle on PPS20 and PPS24 with large radius contours for hand comfort.
•Die cast design of handle on PPS12 and PPS18 makes blade change fast and easy.
Reed Plastic Pipe Saws are specifically designed to cut plastic pipe. The composition of
plastic pipe, especially PVC, tends to be very abrasive, hence, saws designed to cut only
wood become dull very quickly. It is therefore necessary to make saws with the proper
profile, set and hardness to most effectively cut plastic pipe. PPS saws respond to this need
while offering a competitive price and replaceable blades. Low profile PPS12 and PPS18
can reach into small spaces. Plus, their tooth design, set and hardness simplify cuts on ABS
and PVC pipe. PPS20 and PPS24 feature 11 teeth per inch (more than average) and a unique
pattern to create a bite that does not chatter on plastic or wood in the push or pull of the
saw blade. This same tooth spacing makes these fast cutting. Reed plastic pipe saws cut
Schedules 40 and 80 PVC, C900, CPVC and ABS, along with wood. PPS24 also cuts HDPE.
Catalog
No.
PPS12
Item
Code
Pipe Capacity
innom.
PPS12
04512
3
PPS18
04510
4
PPS2004720
6
PPS2404724
8
actual
O.D. mm
75
100
150
200
Length
Weight
in
mm
lbs
kg
16
22
20
24
426
560
508
610
0.6
0.7
1.0
1.1
0.3
0.3
0.5
0.5
REPLACEMENT BLADES
Catalog No.
PPS18B
PPS12B
PPS20B
PPS24B
26
Item Code
Description
94510
94512
94720
94724
PPS18 Blade
PPS12 Blade
PPS20 Blade
PPS24 Blade
2
Plastic Pipe Tools
Internal Pipe Cutters
FEATURES
•Conveniently cut from the inside (i.e. drain pipes or sprinkler drops, etc) using a standard 3/8” drill (not included).
•Exclusive, adjustable guide on IC1SL and IC3/4SL doubles as a depth gauge.
•Abrasive or saw toothed blade option.
Reed Internal Pipe Cutters cut pipe from the inside: below floor level or in the ceiling in
new construction, around pools, and for replacement of closet flanges. Heat-treated
steel, saw-toothed blades on the IC1S, IC1SL and IC3/4SL make for fast cutting. The
IC1A comes with an abrasive blade for areas where the blade may come in contact with
concrete or other hard surfaces which would destroy a saw tooth blade. All internal pipe
cutters fit in a standard 3/8” drill (not included). During use, flats on the larger cutters
keep the cutter from slipping in the jaws of the drill while a lock washer on the smaller
cutters keeps the blades from slipping. All saw tooth internal pipe cutter models cut
plastic pipe aggressively and can cut wood for sink lugs. IC1SL and IC3/4SL feature an
exclusive, adjustable guide that doubles as a depth gauge. The IC3/4SL is exclusive in its
3
/4” pipe diameter.
SL models offer exclusive,
adjustable guide and depth
gauge making it easier to
cut from inside pipe where
other tools won’t go.
Adjustable Guide
SIZE
IC1SL
Blade Diameter Blade Cutting Depth Shaft Weight
Catalog Item
Blade
Size lbs kg
No.
Type
Code
mm
in
in
mm
IC1A 04500 abrasive 1.53 38.8 .50
13.0 4” 0.20.1
IC1S
04501 saw tooth
1.26
32.0
.38
9.6
4” 0.2 0.1
IC1SL* 04505 saw tooth
1.26
32.0
.38
9.6
7” 0.7 0.3
IC3/4SL* 04507 saw tooth
0.75
19.0
.13
3.18
6” 0.4 0.2
*EXCLUSIVE
FEATURES
REPLACEMENT BLADES
Catalog No.
IC1RA
IC1RS
IC3/4RS
Item Code
Description
Standard
Package
04502
04503
04508
Abrasive Blades for IC1
Saw Tooth Blades for IC1
Saw Tooth Blades for IC3/4
5
2
2
IC3/4SL
IC1SL in use
CLEAN REAM EXTREME ™
PLASTIC PIPE FITTING REAMERS
FEATURES
• Clean leftover pipe and solvent cement residue from PVC, CPVC or ABS fittings.
• Reduce labor time and materials costs by reusing the fittings.
• Available in 7 sizes and fit into standard ½” drills (not included).
•Sturdy kits keep reamers organized and clean.
Money-saving reamers are designed to clean out the old or broken pipe and leftover
solvent cement from a fitting so the fitting can be reused. In this era of green living
and recycling, try these reamers on PVC, CPVC or ABS to save time and material
costs. Plastic Pipe Fitting Reamers fit into ½” electric or cordless drills. PPR reamers
work great for vent lines, drain lines and water lines. The carbide cutting insert
provides a cutting edge on each side. Rotate before replacement and receive three
bonus cutting edges.
Cat.
No.
Item
Code
Weight
Shaft
Size
Description
PPR200
lbs
kg
1
PPR75 04521
Reams 3/4” Sch. 40 PVC, CPVC & ABS Fittings
/4” hex 0.12 0.05
1
PPR100 04522
Reams 1” Sch. 40 PVC, CPVC & ABS Fittings
/4” hex 0.14 0.06
1
3
PPR125 04523
Reams 1 /4” Sch. 40 PVC, CPVC & ABS Fittings
/8” hex 0.30 0.13
3
PPR150 04524
Reams 1 1/2” Sch. 40 PVC, CPVC & ABS Fittings
/8” hex 0.40 0.18
3
PPR200 04525
Reams 2” Sch. 40 PVC, CPVC & ABS Fittings
/8” hex 0.60 0.27
3
PPR300 04526
Reams 3” Sch. 40 PVC, CPVC & ABS Fittings
/8” hex 1.20 0.52
3
PPR400 04527
Reams 4” Sch. 40 PVC, CPVC & ABS Fittings
/8” hex 2.000.89
PPRK4 04528 Kit with PPR150, PPR200, PPR300, PPR400 in a hard plastic case
-
7.60 3.50
PPRK5 04520
Kit with PPR125, PPR150, PPR200, PPR300 and
-
7.80 3.50
PPR400 in a hard plastic case
PPRK6 04529
Kit with PPR75, PPR100, PPR150, PPR200, PPR300 and -
7.90 3.60
PPR400 in a hard plastic case
NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems or gas vent systems.
TRAINING
PPRK6
NEW Clean
ReamTM on P. 3a.
Cutting Carbide Insert
Extension Shaft
Catalog No.
PPRLS11
Item Code
Description
94528
11.5” Extension Shaft
Shaft Size
PPR300
/8” hex
3
27
2
www.reedmfgco.com
Plastic pipe tools
Solutions Kits
TC2PPDEB1-2SK
TRAINING
TC3PPSK
TC-AQRSK
FEATURES
• All the tools needed to ensure a perfect joint, every time.
• Works for plastic pipe such as PVC, CPVC, PP, ABS and PE.
• Cutter provides quick, square and clean cut on plastic pipe.
These kits contain tools required to install a perfect joint every time to prevent
failures between pipe and fitting. Quick Release™ Cutter produces a square, clean
cut which is imperative for proper, even stab depth into fittings and for reducing leak
potential. DEB4 and DEB1 deburring tools produce even, consistent chamfer ensuring
proper fitting penetration depth. And, at the same time, allow the solvent cement to
move to the correct part of the pipe (side) for greater surface area solvent weld. The
IC1SL Internal Pipe Cutter (in some kits) yields a uniform internal cut in hard-to-reach
places where a tubing cutter will not fit. All tools are contained in a durable, hard
plastic case.
Weight
lbs
kg
Catalog
No.
Item
Code
Description
TC2PPDEB1-2SK
TC3PPSK
TC3-636SK
TC4-636SK
TC2PPSK
TC-AQRSK
NEW
04142
04151
04155
04156
04157
04162
TC2QPVC, DEB1IPS & DEB1-2IPS with case
TC3QPVC, DEB4 & DEB1IPS with case
TC3QPVC, DEB4 & IC1SL with case
TC4QPVC, DEB4 & IC1SL with case
TC2QPVC, DEB4 & DEB1IPS with case
TC2QPVC, TC4QPVC, DEB4 & DEB1IPS with case
5.6
6.9
6.9
7.1
5.6
8.45
2.5
3.1
3.1
3.2
2.5
3.8
PE Pipe Peelers
PEPEEL6
TRAINING
FEATURES
• One tool does a range of pipe.
•Takes 2 minutes to attach to pipe and peel 6” PE.
• Creates a uniformly peeled surface.
• Works well even on out-of-round pipe.
PE Pipe Peeler prepares the outside diameter of polyethylene pipe for electrofusion by
removing the oxidized layer and contaminates. PE Pipe Peeler can be used on the
edge of the pipe or anywhere along the pipe with sufficient clearance for turning the
tool around the pipe. Chain with thermoplastic rollers of acetel copolymer and plated
side plates resist corrosion. Spring-loaded blade keeps consistent pressure on the
pipe for a smooth finished surface. This blade tension means the blade does not skip.
Its carbide blade provides a cutting edge on each side. Rotate blade before
replacement and receive three additional cutting edges.
Catalog
No.
PEPEEL12
in use
PEPEEL6 04631
PEPEEL12
04632
*O.D. must be 1.9” or more
Weight
Pipe Capacity
in-nom.
actual
O.D. mm
lbs
1 /2 - 6*
6-12
48 - 168
168 - 324
3.11.4
10.9
5.0
1
kg
Flare Tools for PE Water Service Lines
SFPE3/4
FEATURES
• Flare water service lines easily with this innovative and inexpensive tool.
Flare Tools for PE Water Service Lines form a permanent cold flare with ten easy revolutions
to connect PE 160 psi water service tubing (SDR 9), using inexpensive, standard
AWWA flare fittings for CTS tubing. These tools flare medium and high density PE.
Catalog
No.
Item
Code
CTS Tubing
in-nom.
SFPE3/4*04200 3/4”
SFPE1*
04202
1” *EXCLUSIVE
TOOL
SFPE3/4
in use
28
Item
Code
Weight
lbs
kg
1.90.9
2.2
1.0
Plastic Pipe Tools
DEB1 SERIES Deburring
Tools for Plastic PIPE *
O.D. End
FEATURES
•DEB1 offers knurled grip for slip-resistance and durable aluminum body for longevity.
•Deburr and chamfer in the same rotation.
•Suitable for PVC, CPVC, PE, ABS and PP.
•Three sizes of pipe accommodated per DEB1 tool.
Patented DEB1 tools deburr and chamfer to pipe manufacturers’ recommendations in seconds. Plastic
pipe joints get proper fit from smooth, chamfered ends delivered by DEB1 models. Use for PVC, CPVC,
ABS, PE and PP pipe. Find three sizes in one tool for iron pipe size, copper tube size or metric sizes.
DEB1IPS-INT is a double-ended tool to deburr both inner and outer diameters. All DEB1 models have
internal pipe guides, knurled grip for slip-resistance and a sharpenable and/or replaceable blade.
Catalog
No.
Item
Code
Nominal Pipe Capacity
Application
Pipe/
Tubing
1
DEB1IPS*
04650
/2”, 3/4”, 1” O.D.
PVC, CPVC, PE, ABS, PP IPS
1
DEB1CTS*
04652
/2”, 3/4”, 1” O.D.
PVC, CPVC, PE, ABS, PP CTS
DEB1-2IPS*
04654
1 1/4”, 1 1/2”, 2” O.D.
PVC, CPVC, PE, ABS, PP IPS
DEB1M*
04655
20, 25, 32 mm O.D.
PVC, CPVC, PE, ABS, PP metric
DEB1-2CTS*
04656 1 1/4”, 1 1/2”, 2” O.D.
PVC, CPVC, PE, ABS, PP CTS
DEB1IPS-INT* 04670 1/2”, 3/4”, 1” I.D./O.D.
PVC, CPVC, PE, ABS, PPIPS
*EXCLUSIVE
*Patented design.
NOTE: IPS is for use on iron pipe size and CTS is for use on copper tube size.
2
SIZES!
DEB1CTS
I.D. End
Weight
lbs
DEB1M
DEB1IPS-INT
kg
TOOL
0.40.2
0.40.2
0.90.4
0.4 0.2
0.9 0.4
0.6 0.3
DEB1IPS
NEW DEB1 Series
Deburring Tools on
P. 2a.
DEB1IPS in use
DEB4 Deburring Tool
FEATURES
•Suitable for PVC, CPVC, ABS and PP.
•Deburr and chamfer in the same rotation using DEB4.
TOOL
One easy revolution of Reed exclusive DEB4 deburrs and produces a 15° external
chamfer in seconds. Deburrs the pipe exterior only to allow easy assembly into
fittings. It fits comfortably in one’s hand for a secure grip. As an alternative to hand
turning, there’s a ½” square drive pocket on the backside for use with a ratchet
wrench. DEB4 creates a smooth, chamfered pipe end so solvent can be spread evenly
for pipe joining. Aluminum die-cast deburring tool features a hardened steel blade
that is reversible, sharpenable and replaceable. Fits six nominal pipe sizes of up
through 4” diameter.
Catalog
Item
No.
Code
DEB4*
04430
*EXCLUSIVE
Nominal Pipe Capacity
Application
1-1/4”, 1-1/2”, 2”, 2-1/2”,
3”, 4” nom. 42, 50, 63, 75,
90, 114 mm O.D. actual
3/32” 15° chamfer
PVC, CPVC, ABS, PP Blade
DEB4
in use
Weight
lbs
kg
0.7
0.32
DEB4
Cone Deburring Tool
FEATURES
•Suitable for PVC, CPVC, ABS, PE and PP.
•For deburring inside and outside of PE, use DEB2.
•Versatile DEB2 shape suits all plastic pipe sizes up through 2” (60 mm) pipe.
DEB2
The DEB2 cone shape deburrs the inner and outer edges of PVC, CPVC, ABS, PE and
PP pipe through 2” diameter. Made from steel, the cone design allows it to be used on
even the smallest pipe, including 1/8” diameter. The part that rests in the operator’s
hand features a thick plastic edge covering for hand comfort.
Catalog
No.
DEB2
Item
Code
04436
Nominal Pipe Capacity
Application
up to 2” (60 mm)
PVC, CPVC, ABS, PP, PE
Weight
lbs
kg
0.2
0.09
NEW Cone Chamfer
Tool on P. 3a.
Deburring Tools (for metal) on P. 13
29
2
www.reedmfgco.com
Plastic pipe tools
PEX Crimpers
Go/No-Go Gauge
11”
FEATURES
•Crimps rings easily, giving good connections.
•Crimpers are the right tools for PEX systems because they properly seal the rings without distortion.
•Each Reed copper ring crimper includes a go/no-go gauge and an Allen wrench.
PXCR1234M
PEX Crimpers squeeze the copper rings used on PEX brass fittings. PEX systems are
used for potable water lines, radiant heat, snow melt and ice rink systems, among
other applications. The design of these PEX crimpers eliminates tool marks and
distortion on the rings. The tools crimp rings easily, making PEX installation a breeze.
For one-hand use on 1/2” and 3/4” PEX, consider the PEXOH12 or PEXOH34.
Catalog
No.
Item
Code
Handle
Length*
Description
1
PXCR12S
04900
/2” capacity
3
PXCR34S
04903
/4” capacity
PXCR1M
04904
1” capacity
1
PXCR1234M
04910
/2” and 3/4” capacity
1
PEXOH12
04920
/2” capacity, one-hand style
3
PEXOH34
04925
/4” capacity, one-hand style
*Handle length does not include head.
PEXOH12
8 3/4”
9”
11 1/2”
11”
8 1/2”
9”
Weight
kg
lbs
3.0
1.4
3.0
1.4
4.0
1.8
4.3
1.9
2.5
1.1
2.6
1.2
Pipe Bevelers
FEATURES
•Beveler only needs a few turns around PVC pipe to safely make the smooth 15° bevel.
•Strong, reinforced aluminum frame for durability.
•Adjusts to bevel multiple sizes with one tool.
With a strong aluminum alloy frame, effective roller locking and good tool life, a
Beveler produces a smooth 15° bevel on all types of plastic pipe, including gasketed
PVC and C900 PVC in about one minute. Depending on wall thickness, the bevel can
be up to 1 1/2” long. Beveler is easily adjusted for different pipe sizes and thicknesses,
with no part changes. Bevel blade can be sharpened or replaced.
BT1 in use
TRAINING
Thumb Screw
Adjustment
Catalog
No.
BT1
BT2
Weight
Pipe Capacity
Item
Code
in-nom.
actual
O.D. mm
lbs
kg
04395
04398
1 /2 - 8
1 1/2 - 12
40 - 200
40 - 300
3.0
6.1
1.4
2.8
1
NOTE: If pipe is not stationary, a Reed pipe vise is recommended.
BT2 in use
Much faster, safer, and far more
effective than a file or power saw as
it reduces the possibility of injury
and leaks after joining pipe.
REPLACEMENT BLADES
Catalog No.
BT1B
BT1SB
Item Code
Description
94388
94386
Bevel Blade for BT1 and BT2
Support Blade for BT1 and BT2
CHAMFER TOOLS
TRAINING
PB4
PB4 in use
FEATURES
•Quickly chamfers pipe using drill power, eliminating user fatigue when making multiple cuts/chamfers.
•Deburrs inside and outside simultaneously, in just seconds.
•Produces smooth, consistent chamfer on PVC and CPVC, eliminating leak channels that can be caused by improper chamfer.
The Chamfer Tool attaches to an electric or cordless drill (not included) to chamfer both
the inner and outer diameters of plastic pipe. PVC and CPVC pipe joints require a
chamfer and Reed’s PB series chamfers create a smooth, consistent, 15° chamfer in
seconds. These chamfer tools are available in a kit consisting of 2”, 3” and 4” sizes in a
jobsite quality case or individually by size.
Catalog
No.
PB3
interior
30
PBKIT
PB2
PB3
PB4
Item
Code
Description
04660
04662
04663
04664
PB2, PB3 & PB4 with case
for 2” plastic pipe
for 3” plastic pipe
for 4” plastic pipe
Weight
lbs
kg
6.6 0.4
0.5
0.7
3.0
0.2
0.2
0.3
Plastic Pipe Tools
Universal Pipe Cutters for PE
FEATURES
• Special blades and blade guard for PE.
• Includes all the parts for successful PE cuts.
Reed’s pneumatic-powered Universal Pipe Cutters (UPC) for PE are available to cut
8” - 48” nominal diameter (200-1300 actual O.D. mm) PE pipe. Both kits ship in a steel
toolbox and include a UPC cutter, a filter-regulator-lubricator, UPCSTEEL6 and UPCPE8
blades. The UPCPE8 blade will cut large diameter PE pipe with a wall thickness up to
2 23/32” (69 mm). To cut 6” - 8” PE pipe, the UPCSTEEL4 blade must be purchased separately.
Item
Code
Catalog
No.
Pipe Diameter
actual O.D.
in-nom.
mm
2
UPC836APE
in use
Blade Guard
for PE
Gross Weight*
lbs
UPC836APE*
07517
8 - 36
200 - 1000
101
UPC848APE*
07518
8 - 48
200 - 1300
106
*EXCLUSIVE
*Gross Weight includes all components plus packaging.
#07517 and #07518 units do not require a water tank and one is not supplied.
kg
45.9
48.2
Universal Pipe cutter Blades for PE
Catalog
No.
Item
Code
Description
Pipe
Diameter
UPCSTEEL4975194” BLADES cut up to 23/32” (18.3 mm) 6 - 8 in
PE wall thickness
150 - 200 mm
UPCSTEEL697520 6” BLADES cut up to 1 23/32” (43.7 mm) 8 - 48 in
PE wall thickness
200 - 1300 mm
UPCPE897521
8” BLADES cut up to 2 23/32” (69 mm) 26 - 48 in
wall thickness
660 - 1300 mm
UNIVERSAL PIPE CUTTERS ON P. 16 - 17, including UPC for PVC.
Pipe
Material
PE
PE
TOOL
UPCSTEEL6
PE
UPCPE8
TRAINING
ASK ABOUT...
UPC616AP #07513 Universal pipe cutter for pvc
TRAINING
ReED
training videos
Reed Manufacturing Company has a dynamic
online library of training videos. The videos
are in English. Often, however, simply viewing
the demonstration makes the tool use more
understandable, no matter the language.
Reed recommends a high speed connection for
viewing or downloading these videos. Reed also
offers a USB drive of the video library. Request it
as #01063.
videos.reedmfgco.com
31
2
www.reedmfgco.com
Plastic pipe tools
PLAS In-Line Rotary™ Cutters
Proprietary tool cuts square on
even the largest plastic pipe: 28” (800 mm). Cut and bevel
in-line.
FEATURES
•Clean and safe! No chips to clog valves and apertures.
•Only 6” - 8” clearance needed to turn PLAS around pipe.
•Cuts out-of-round pipe because of spring loaded nuts.
•Inexpensive tool to make a cut for a tie-in or pipe break and then get the line back in use. Reduce overall labor costs!
PLAS In-Line Rotary™ Cutters are excellent for cutting PVC or PE pipe in trench or above
ground. Each PLAS rotary cutter needs just 6” to 8” (153 - 203 mm) clearance around the
pipe, making them easy to operate in trench and with lower prep costs. Outboard rollers
keep the cutter aligned on pipe, ensuring a square cut every time. Carbide-tipped blades
for PVC are long-lasting and penetrate up to a 2” wall thickness.* Each PVC cutter also
can produce, in-line with the cut, a 15° bevel on both sides of the cut. In addition, Reed
has developed a hardened, tool steel blade to cut PE pipe. The curved blade drives chips
out of the way, making PE cuts much easier. PLAS In-Line Rotary Cutters can retrofit for
PE by purchasing PLASPEB blade #94485 separately.
Bevel Blade
PLAS2
PLAS1 works
great for C900
water pipe.
PLAS1
A
PLAS1PE
B
C
PLASOH
32
Weight
lbs
kg
FEATURES
•Attached handles permit fast hand-turning – about half the cutting time of a regular PLAS cutter.
•Leaves a disposable remnant (not dust or chips) that is easy to recycle.
•Simple to transport and fast to use on PE and PVC.
Exclusive to Reed, PLAS Hand-over-Hand Rotary™ Cutters excel at cutting PVC or PE
pipe in trench or above ground. They feature attached handles which permit fast handturning. Once the cutter is positioned around the pipe, the operator turns it for one revolution, feeds the cut-off tool closer to the pipe, and continues turning/feeding as needed. These OH models require 11” (280 mm) clearance around the pipe. Attached handles
means there is no need to reposition a handle after each turn, compared to a regular
PLAS (above). The built-in handle convenience equals no loose parts. Like PLAS Cutters
above, outboard rollers keep the cutter aligned on pipe, ensuring a square cut every
time. The tool’s carbide-tipped blades for PVC are long-lasting and penetrate up to a 2”
wall thickness. Each PVC cutter also can produce, in-line with the cut, a 15° bevel on
both sides of the cut. In addition, Reed offers a hardened, tool steel blade to cut PE
pipe. The curved blade drives chips out of the way, making PE cuts much easier.
Pipe Capacity
Weight
Sections
Application*
Used
actual
kg
lbs
in-nom. O.D. mm
PLASOH* 04463
4 - 8 106 - 240
PVC
E (2)
21
9.6
PLASOHPE* 04464
4 - 8 106 - 240
PE
E (2)
21
9.6
PLASOH12PE* 04468
4 - 12 106 - 335
PE
E (2), B (1)
52
23.6
PLASOH12* 04469
4 - 12 106 - 335
PVC
E (2), B (1)
52
23.6
*Exclusive
NOTE: 04463, 04469 ship with cutting blade for PVC. Models 04464, 04468 ship with cutting blade for PE.
Blades are interchangeable.
*PLAS cutters will cut PVC and PE Pipe. Specific limitations for PE are as follows:
2” (38.1 mm) wall thickness PE - up to 12” pipe.
Catalog
No.
PLASOH HandOver-Hand in use
Sections
Used
plas hand-over-hand rotary™ cutters
PLASOHPE with
FPV20 vise
PLASOH using
PLASPVCB blade
Application*
D
E Section
TOOL
Pipe Capacity
Item
Code in-nom. actual
O.D. mm
PLAS1*
04470 6 - 12
160 - 335
PVC
A, B, C
52
23.6
PLAS1PE* 04474 6 - 12
160 - 335
PE
A, B, C
52
23.6
PLAS2*
04475 14 - 18 355 - 500
PVC
B, C (2), D
57
25.9
PLAS2PE* 04477 14 - 18 355 - 500
PE
B, C (2), D 5725.9
PLAS3*
04480 14 - 24 355 - 630
PVC
B, C (3), D
62
28.2
PLAS3PE* 04483 14 - 24 355 - 630
PE
B, C (3), D
6228.2
PLAS4*
04485 14 - 28 355 - 800
PVC
B, C (4), D
6830.9
PLAS4PE* 04487 14 - 28 355 - 800
PE
B, C (4), D
68
30.9
*Exclusive
NOTE: 04470, 04475, 04480, 04485 ship with cutting blade for PVC. Models 04474, 04477, 04483, 04487
ship with cutting blade for PE. Blades are interchangeable.
*PLAS cutters will cut PVC and PE Pipe. Specific limitations for PE are as follows:
2” (50.8 mm) wall thickness PE - up to 14” pipe, 1 1/2” (38.1 mm) wall thickness PE - up to 18” pipe, 1” (25.4 mm)
wall thickness PE - up to 28” pipe.
TRAINING
TOOL
Catalog
No.
Item
Code
Plastic Pipe Tools
2
Guillotine Pipe Cutters
FEATURES
•Squarest cut available for PE due to strong frames and unique blade design.
•Saves facing cost: no facing needed for electrofusion, less needed for butt-fusion.
•Requires minimal clearance, only 4” - 6” (102 - 152 mm) around pipe.
•Clean and safe! No chips to clog valves and apertures.
•Many high quality cuts, with durable non-stick coated, tool steel blade.
Robust Guillotine Pipe Cutters are designed to cut PE pipe from SDR 15.5 to SDR 9
within 1/8” (3 mm) of square on medium and high-density pipe. HPC12 is designed for
DIPS and IPS PE pipe from SDR17 to SDR9.3. Brass bushings in HPC12 crosshead feed
assembly yield smooth feed and more consistent blade alignment. The accurate cuts
from Reed Guillotine Cutters mean no facing is needed for electrofusion and only minimal facing for butt fusion joints. Durable, non-stick coated blade makes many square
cuts with no chips to clog valves and small openings. Slight taper on blade allows an
easy start to the cut, and holds form for a nice, straight cut. Blades are easy to sharpen
or replace.
NOTE: Reed strongly recommends use of the Grounding Accessory ON P. 35 with Guillotine
Cutters. Use a grounding accessory as a precaution against static build-up. Dissipate the charge and
minimize the possibility of ignition.
Catalog
No.
HPC4
HPC8
HPC12
Item
Code
04604
04608
04612
Length
Capacity
Weight
in-nom.
actual
O.D. mm
in
mm
lbs
kg
2 - 4
3 - 8
4 - 12
63 - 125
90 - 225
114 - 350
19
30
51
482
750
1295
15.6
35.0
100.0
7.1
15.9
45.5
HPC12
in use
Smooth Feed
on Crosshead
Feed Assembly
REPLACEMENT BLADES
Item
Description
Code
HPC4B
40329
HPC4 Blade
HPC8B
40027
HPC8 Blade
HPC12B
94903
HPC12 Blade
NOTE: HPCs cut PE only and will not cut PVC or PP (polypropylene) pipe, such as Aquatherm®.
Catalog No.
FEATURE
TRAINING
HPC8
HPC4
Blade Taper
HPC8
in use
Because of the crosshead and blade design,
all HPCs produce a much straighter cut with
minimal blade wear. Safer than abrasive
saws because no PE chip residue remains
in the pipe that may later clog valves.
33
2
www.reedmfgco.com
Plastic pipe tools
PE Squeeze-Off Tools
Sliding
Bar Handle
Optional
strap #98329
for PES8M
and PES6M
SIZES!
PES8M
FEATURES
• Robust aluminum bars on PES2 and larger models reduce tool weight for easier handling.
• Positive stops prevent damage caused by over-clamping.
• Easy to use in line because of swing bar and no loose parts.
•PES1 built-in stops and “C” shape allow easy movement on and off pipe.
• With the proper stops, PES2, PES4, PES6 and PES8 also work for metric pipe.
•Double-bar design on PES2-2 models gives two squeeze points in a row which provide better shut-off and extra protection against leaks, all in one tool.
• Wide variety of stops for all Reed PE squeeze-off tools.
Reed offers the best designed tools for stopping flow in ½” up to 8” PE pipe. Different
models handle a wide range of pipe sizes and applications. Sliding bar handles make
work in tight places easier and increase leverage for tightening. Fine-pitched thread
on feed screw allows for a controlled, low-effort squeeze. Grease fittings at friction
points make operation smoother and extend tool life. Aluminum bars are anodized or
painted for protection from the elements. All PE squeeze-off tools use positive stops
to prevent damage caused by over-clamping. Multiple size/SDR settings on one pair of
stops provide quick, convenient over-squeeze protection for standard pipe sizes.
NOTE: Reed strongly recommends use of the Grounding Accessory ON P. 35 with PE Squeeze-Off
Tools. Use a grounding accessory as a precaution against static build-up. Dissipate the charge and
minimize the possibility of ignition.
Clamp
Assembly
FEATURES
Catalog
No.
Item
Code
Capacity
in-nom.
PES1IPS/CTS*04290 1/2 - 1 1
PES2IPS
04302
/2 - 2 1
PES2CTS
04304
/2 - 2
PES4 04306
2 - 4
1
PES2-2IPS04322
/2 - 2
1
PES2-2CTS04324
/2 - 2
PES2METRIC 04703
-
PES4METRIC 04705
-
*All steel construction.
actual O.D.
.63” - 1.32”
.84” - 2.38”
.63” - 2.13”
2.38” - 4.50”
.84” - 2.38”
.63” - 2.13”
20 - 63 mm
75 - 110 mm
Pipe/SDR Stops
Stops
# of Stops
4
6
6
7
6
6
6
6
94279
98079
98078
98094
98079
98078
98124
98121
Length
Weight
in mm
11 280
14 305
14 305
21 508
12 305
12 305
12 305
20 508
lbs kg
6.5 3.0
11.6 5.3
11.6 5.3
38.6 17.5
11.6 5.3
11.6 5.3
11.6 5.3
38.6 17.5
HYDRAULIC & MANUAL, LARGE DIAMETER
PES1IPS/CTS
FEATURES
•Manual PES6M and PES8M are lower-price and lighter-weight than the hydraulic models, making them practical for carry-in jobs, infrequent use or budget-minded work crews.
•PES8H handles large diameters with ease due to its included, separate hydraulic hand pump that allows the operator to work the pump from a convenient surface.
Built-in Stops
Capacity
Length Gross Weight*
Pipe/SDR Stops
Power
Item
Code in-nom. actual O.D. mm Source # of Stops Stops (pair of each) in mm lbs
kg
PES8M
04308 3 - 8
89 - 219
Manual
12
98319 & 98320 28 711 148 67.3
PES8H
04309 3 - 8
89 - 219
Hydraulic
12
98319 & 98320 28 711 227 103.2
PES6M04313 3 - 6
89 - 168
Manual10
98356 & 98320 28 711 9241.8
PES6METRIC 04706
-
90 - 160
10
98360 & 98319SO 28 711 81 36.8
pair of each
PES8HMETRIC 04707
-
90 - 200
10
98360 & 98319SO 28 711 130 59.1
pair of each
PES8MMETRIC 04708
-
90 - 200
10
98360 & 98319SO 28 711 81 36.8
pair of each
NEW
NOTE: PE Squeeze-Off Tools conform to ASTM F1041 and F1563.
*Gross Weight includes all components plus packaging.
PES2 models fit both CTS
and IPS PE by simply changing
Catalog
No.
the safety stops.
PES4
Alternate
Handle Spot
PES2-2CTS
PES2-2CTS
Double Squeeze
Design
34
PES2CTS
Plastic Pipe Tools
Reed automatically provides multiple pipe/
SDR stops in one tool. Also, all parts store
on the tool, making it self-contained.
Flow Control Valve
Item Code
Description
94317
Flow Control Valve Kit for PES8H
TRAINING
CONVERSION KITS
Use easy-to-adjust stops to convert PE Squeeze-Off Tool
PES2 models from CTS to IPS or vice versa.
Item
Code
98078
98079
Stops
CTS
IPS
2
PES8H with (optional)
Flow Control Valve
Converts
Flow Control Valve
PES2IPS to PES2CTS
PES2CTS to PES2IPS
Replacement & Alternate Stops
Sold in pairs, replacement and alternate stops come in
a variety of CTS and IPS sizes. Visit www.reedmfgco.
com/en/cts-ips-stops for complete details.
Clamps
custom & Metric stops
Custom stops available for PES2 models with a
minimum of 20 tools per custom stop. Metric
stops are available for the PES2, PES4, PES6 and
PES8 models, with no minimum quantity. Visit
www.reedmfgco.com/en/metric-stops for details
on metric stops.
Metric Stops
CTS and IPS Stops
FCVPES8H
Grounding Accessory
FEATURES
• Ground the work area to increase safety for the operator.
The Static Electricity Grounding Accessory (PEGR) provides a path to ground for any
static charge. Because static can build up on plastic pipe, even for water services,
there is a possibility of a spark discharge of sufficient energy to cause ignition if the
proper air/gas mixture is present. Use of a static electricity grounding accessory is a
precaution that can dissipate the charge and minimize the possibility of ignition. Reed
strongly recommends use of this grounding accessory with PE Squeeze-Off Tools and
Guillotine Pipe Cutters in all gas applications.
Item
Code
Catalog
No.
PEGR
04619
PEGR
Weight
kg
0.7
lbs
1.5
Static Discharge Alarm
FEATURES
• Be aware of static in the work area by use of a discharge alarm.
Static Discharge Alarm warns of static build-up. Static build-up can lead to possible
pinholing of PE pipe resulting from electrical forces discharging through the pipe wall
during squeezing or cutting. Static discharge alarm features test circuit and low
battery warning. Plastic case included. Use with Grounding Accessory.
Catalog
No.
STDA1
Item
Code
Dimensions
04620
1 3/8” X 3 1/4” X 5 1/2”
STDA1
Weight
lbs
kg
0.6
0.3
35
2
www.reedmfgco.com
Plastic pipe tools
Plastic Pipe Joiners
PPJ
Gasketed
FEATURES
•Join or separate gasketed PVC pipe using the PPJ and PPJVS universal saddles.
•Efficiently connect 4” - 12” (114 - 324 mm) PVC solvent cement joints using the PPJ and individually sized saddles.†
•PPJFA Fitting Attachment is required for solvent cement branch connections only.
With 28-to-1 leverage, it is easy for one person to join PVC pipe up to 16” gasketed
or up to 12” solvent cement joints, using a Reed Plastic Pipe Joiner.
TOOL
FOR GASKETED PIPE: The Plastic Pipe Joiner can connect and separate 4” - 16”
IPS and cast iron size gasketed pipe. Components required for joining gasketed pipe
include the Plastic Pipe Joiner (PPJ) and V-shaped saddles (PPJVS).
PPJVS
FOR SOLVENT CEMENT CONNECTIONS: The Plastic Pipe Joiner connects solvent
cement joints on all pipe schedules, IPS and water pipe from 4” - 12”. For solvent
cement connections, individually sized saddles must be ordered together with the
PPJ Plastic Pipe Joiner. PPJFA fitting attachments are sold separately and only
required for branch attachments.
TRAINING
NOTE: PPJVS sold separately from PPJ.
NOTE: Connection saddles for gasketed pipe or solvent cement connections must be purchased separately.
GASKETED PIPE
Easy-to-use design for one
person operation with no leaks.
Solvent Cement
PPJ
Catalog
No.
TOOL
PPJ*
04446
PPJVS**
04441
*EXCLUSIVE
*One pair of saddles.
PPJFA
Pipe Capacity
in-nom.
—
4 - 16
actual
O.D. mm
—
114 - 434
Weight
lbs
kg
44.020.0
8.0
3.6
SOLVENT CEMENT CONNECTION
Catalog
No.
PPJ*
PPJFA*
PPJ6S
Item
Code
Item
Code
04446
04439
O.D. Capacity
in-nom.
—
4 - 12
Weight
actual
O.D. mm
lbs
—
114 - 324
44.020.0
39.0
17.7
kg
*EXCLUSIVE
SADDLES for solvent cement connection † (sold in pairs)
NOTE: Fitting attachment (PPJFA) and saddles sold separately from PPJ.
Need to join to an elbow?
PPJFA is the solution.
ReED
ASSOCIATIONS
36
Catalog
No.
PPJ4S
PPJ6S
PPJ8S
PPJ10S
PPJ12S
Item
Code
04442
04444
04447
04448
04449
O.D. Capacity
Weight
actual
O.D. in
actual
O.D. mm
lbs
kg
4.5
6.6
8.8
10.8
12.8
114
168
224
273
324
4.0
4.5
6.0
7.0
7.0
1.8
2.0
2.7
3.2
3.2