Technical Data Sheet Screw Clamps and - BPI

www.oetiker.com
Technical Data Sheet
Screw Clamps and Universal Clamps
Stepless® Screw Clamps PG 178
PG 178 for small diameters
www.oetiker.com
2
PG 178 for big diameters
Bridge
Tongue-in-groove design
Interlock with multiple diameter
adjustments
Installation aid for large
diameters
Choice of engagement positions: clamp can be adjusted to several different nominal diameters
Narrow Band: concentrated transmission of clamping force, complies with SAE J1508 Type SSPC
360° Stepless®: uniform compression, or uniform surface pressure.
Burr-free strip edges: reduced risk of damage to the part being clamped
Self-tensioning: compensates for thermal cycle diameter changes
Stepless® Screw Clamps
Product Group 178
Material
PG 178 Band, spacer, retaining elements (D-nut):
Stainless Steel, Material no. 1.4301/UNS S30400
Screw: Stainless Steel, Material no. 1.4319/UNS S30200
Spring: 17-7PH (aerospace quality)
Series
Size range
18.0 – 255.0 mm width x thickness
9.0 x 0.6 mm
Some sizes are only available if an appropriate minimum
quantity is ordered.
Oetiker Stepless® Screw Clamps are available in two versions:
Oetiker Stepless® Screw Clamps and Self-Tensioning Stepless®
Screw Clamps.
Material thickness
Oetiker Stepless ® Screw Clamps and Self-Tensioning Stepless ®
Screw Clamps are made from strip material 9 mm wide and
0.6 mm thick. The dimensions of the strip ensure optimum sealing
with EPDM rubber and silicone hoses, while taking into account
the necessary radial force, the compressibility of the hose,
the sealing/retaining properties and the environmental conditions.
Interlock
The closure is a mechanical interlock whose function is to provide
secure retention of the round clamp geometry. The interlock
can be opened to permit radial installation of the clamp, and at
the same time provides a simple way of relocating the interlock
features to obtain alternative diameters prior to tightening.
The data in this catalog are based on many years experience. They are intended for reference, not as design specifications.
Stepless® Screw Clamps PG 178
Positions for diameter changes
Sizes 24–42 mm
– 3 different positions
– diameter change for each step 1.6 mm
Sizes 45–55 mm
– 3 different positions
– diameter change for each step 2.1 mm
Sizes 60–255 mm
– 5 different positions
– diameter change for each step 2.0 mm
Screw: M4 x 0.7
Screw head: combination of hexagon head with cross-socket
Assembly Recommendations
1.Turn screw anti-clockwise until it stops at the “D” nut.
2.For radial installation or change of diameter, unlatch the
interlock.
3.Position the open clamp around the hose. Locate the tongue
in the groove and position the apertures of the mechanical
interlock over the mating features. Engage the interlock at the
smallest possible diameter.
4.Tighten the screw to the required torque. Do not exceed the
maximum permissible tightening torque.
5.A gap of > 3 mm should exist between the D-nuts. This ensures that there is sufficient movement for the clamp to reduce
in diameter when the spring of the self-tensioning clamp
expands during contraction of the hose. If the gap between the
D-nuts is less than the recommended 3 mm, proceed to step 6.
(Only applicable to Self-Tensioning Spring Screw Clamps).
6.Turn the screw anti-clockwise to loosen the Self-Tensioning
Screw Clamp.
7.Relocate the interlock in the next smaller diameter position.
8.Tighten the screw to the required torque. Do not exceed the
maximum permissible tightening torque.
www.oetiker.com
Tolerance compensation with Stepless® Screw Clamps
Oetiker Stepless® Screw Clamps and Self-Tensioning Stepless®
Screw Clamps should be tightened to the optimum torque as
specified in the guide. This torque takes into account the required
degree of compression, the necessary radial force, and the
maximum torque resistance of the screw and clamp band. By
using a defined and constant torque at installation, compensation
for component tolerances will always be available and the radial
force will remain approximately the same.
The spring on Oetiker Self-Tensioning Stepless ® Screw Clamp
serves as a compensation element to accommodate changes
in diameter resulting from thermal expansion and contraction or
vibration. This feature gives Screw Clamps optimum sealing
performance even in applications where there are strong thermal
influences.
Order information
Item No.* Ref. No.* Item No.**
Ref. No.**
The values indicated above are based on maximum clamp torque
capacity and common hose materials. Low durometer hardness
hoses may require alternative or lower torque values and should
be verified by means of product compatibility investigations.
For Stepless® Screw Clamps the minimum gap between D-nuts
should be > 3mm.
** Stepless® Screw Clamps
** Self-Tensioning Screw Clamps
Gap
D-nuts
Size range
(mm)
Band width 9 mm, thickness 0.6 mm
17800120
17800122
17800124
17800125
17800126
17800127
17800128
17800129
17800130
17800131
17800132
17800133
17800134
17800135
17800136
17800137
17800138
17800139
17800140
Maximum average, static torque guide:
Spring without color identification (sizes 24.0–31.0 mm):
90–100 Ncm Max (8–9 inch pound-force max.)
Green spring (sizes 32.0 mm and larger):
135–200 Ncm Max (12–18 inch pound-force max.)
3
024-9
028-9
032-9
036-9
040-9
045-9
050-9
055-9
060-9
065-9
070-9
075-9
080-9
085-9
090-9
095-9
100-9
105-9
110-9
17800170
17800172
17800174
17800175
17800176
17800177
17800178
17800179
17800180
17800181
17800182
17800183
17800184
17800185
17800186
17800187
17800188
17800189
17800190
024S9
028S9
032S9
036S9
040S9
045S9
050S9
055S9
060S9
065S9
070S9
075S9
080S9
085S9
090S9
095S9
100S9
105S9
110S9
18 – 24
22 – 28
26 – 32
30 – 36
34 – 40
37.5– 45
42.5– 50
47.5– 55
49 – 60
54 – 65
59 – 70
64 – 75
69 – 80
74 – 85
79 – 90
84 – 95
89 –100
94 –105
99 –110
For Self-Tensioning Stepless® Screw Clamps, the minimum
diameter of the clamping range is 1 mm larger than that given
in the above table.
Alternative diameters on request.
Worm Drive Clamps PG 180
PG 180 with wing screw
www.oetiker.com
4
PG 180
Interlock and visual overload
protection
Housing with flap lock and
hexagon socket screw SW5
Toggle lock with intermediate position: fast and simple installation, high tightening torque
Visual overload protection: protects against excessive tightening
Hexagon socket screw SW5: fast and safe installation
Alternative with wing screw: tool integrated in the clamp
Worm Drive Clamps
Product Group 180
Material
180 W4 Band and fastener: Stainless Steel,
Material no. 1.4301/UNS S30400
Screw: Stainless Steel, Material no. 1.4305/UNS S30300
Series
Size range
30.0 – 500.0 mm width x thickness
12.2 x 0.9 mm
Special sizes up to 1000 mm diameter available on request.
Some sizes are only available if an appropriate minimum
quantity is ordered.
Screw Clamp design
Flap lock
After opening the body, the band can be formed by hand to
approximately the clamping diameter. The flap can then be closed,
and the clamp tightened by turning the screw. As a result,
the screw only has to be turned for the last part of the clamping
operation.
Intermediate stop
The flap is secured by an intermediate stop. Even when loosely
installed, clamps cannot open on their own accord.
Visual overload protection
The housing incorporates a web which distorts visibly above a
tightening torque of 4–5 Nm (35–44 in-lbs). This visual feature
indicates that a Worm Drive Clamp is optimally tightened and still
has an adequate factor of safety to the maximum tightening
torque.
The data in this catalog are based on many years experience. They are intended for reference, not as design specifications.
Worm Drive Clamps PG 180
www.oetiker.com
Worm Drive Clamps with wing screw
The Worm Drive Clamp with wing screw can be installed entirely
without tools. The integral, torsionally-stiff wing provides optimum
grip. The dimensions correspond to the standard design with the
exception of the wing screw.
Oetiker Universal Clamp Band
The universal tension band is available in 8 or 12 mm band width,
each on rolls with lengths of 10, 20, or 30 m, with a suitable lock
for band widths of 8 or 12 mm.
Stainless steel universal tension band and lock.
5
Assembly Recommendations
For safe tightening of screw clamps without wing screws, we
recommend use of a 5A/F hexagon wrench. The maximum static
tightening torque is 6 Nm (53 in-lb).
Installing an Universal Worm Drive Clamp
Measure the circumference to be clamped and cut off the band to
that length. Pass the end of the band, from above, through the
slit in the closing element, and fold it back at least 40 mm below
the band. Pass the second end of the band through the slit in
the perforated part of the closing element and fold it back at least
40 mm. Lay the band around the part to be clamped, push the
band end with perforation below the flap lock and close.
Tighten the clamp with a 5 A/F hexagon wrench. This system may
not be entirely suitable for soft and flexible components.
Order information
Item No. Clamping range D (mm)
Screw Clamps
Band width 12 mm, thickness 0.9 mm
18000206
18000025
18000026
18000027
18000028
18000029
18000030
18000031
18000032
18000033
18000034
  30
  50
  80
110
140
170
200
230
260
290
320
–
–
–
–
–
–
–
–
–
–
–
  60
  80
110
140
170
200
230
260
290
320
350
–
–
–
–
–
–
–
–
–
–
–
  60
  80
110
140
170
200
230
260
290
320
350
Item No. Clamping range D (mm)
Universal Clamp Band
Band width 8 mm, thickness 0.5 mm
18000211
18000213
18000214
18000215
Closing element for stainless steel
Universal clamp band, roll 10 m
Universal clamp band, roll 20 m
Universal clamp band, roll 30 m
Band width 12 mm, thickness 0.5 mm
18000211
18000216
18000217
18000218
Closing element for stainless steel
Universal clamp band, roll 10 m
Universal clamp band, roll 20 m
Universal clamp band, roll 30 m
Screw Clamps with wing screw
18000207
18000136
18000137
18000135
18000168
18000143
18000169
18000174
18000175
18000176
18000177
  30
  50
  80
110
140
170
200
230
260
290
320
Worm Drive Clamps are available for a clamping range from
30 mm up to 1000 mm. Up to diameter 200 mm, Worm Drive
Clamps are delivered pre-shaped, above diameter 200 mm they
are supplied flat. Customer-specific sizes are available on request.
Worm Drive Clamps Mini PG 180
PG 180 Mini with wing screw
www.oetiker.com
6
PG 180 Mini
Housing with screw
Compact design: Minimal space requirement, miniature sizes
Cylindrical screw head: fast, simple and safe installation
Embossed band strip: reduced risk of damage to the part being clamped
Alternative with wing screw: tool integrated in the clamp
Worm Drive Clamps Mini
Product Group 180
Material type R PG 180
W2 Band: Rust-resistant chromium steel,
Material no. 1.4016/UNS S43000
Screw and housing: Steel, zinc-plated, blue chromate finish
Material type Mini R+S 180
W4 Band and fastener: Stainless Steel,
Material no. 1.4301/UNS S30400
Screw: Stainless Steel,
Material no. 1.4305/UNS S30300
Series
Size range
7.0 –   19.0 mm
7.0 – 219.0 mm
Clamp Design
Oetiker Mini R+S Worm Drive Clamps
Mini R+S
Sizes 1–7 band overlapping
Mini R+S
Above size 8, band reverse-bent
width x thickness
5.0 x 0.4 mm
Type R1
5.0 x 0.4 mm
Type R+S2
Some sizes are only available if an appropriate minimum
quantity is ordered.
1
2
R = stainless
R+S = stainless and acid-proof
The data in this catalog are based on many years experience. They are intended for reference, not as design specifications.
Worm Drive Clamps Mini PG 180
www.oetiker.com
Oetiker Mini R Worm Drive Clamps
7
Assembly Recommendations
For safe tightening of screw clamps without wing screws, we
recommend to use a suitable standard screwdriver.
Maximum static tightening torques:
Mini R  70 Ncm (6 in-lb)
Mini R+S/wing screw 120 Ncm (10 in-lb)
Optionally, these clamps can be supplied open.
Order information
Item No. Type Clamping range D
(mm)
Worm Drive Clamp Mini R
Band width 5 mm, thickness 0.4 mm
18000000
18000001
18000002
18000248
18000249
18000252
18000254
18000255
18000256
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
R1
R 1.5 R2
R 1 GZ R 2 GZ 1S
2S
1 GS 2 GS 6
7
11
6
9
6
11
6
9
–
–
–
–
–
–
–
–
–
11
15
19
11
19
11
19
11
19
Worm Drive Clamps with cylindrical screw head Mini R+S
Band width 5 mm, thickness 0.4 mm
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Clamping range D
(mm)
Worm Drive Clamps with wing screw Mini R+S
Band width 5 mm, thickness 0.4 mm
GZ=rolled with cylindrical screw head
S =open with hexagon-head screw
GS=rolled with hexagon-head screw
18000003
18000004
18000005
18000006
18000007
18000008
18000009
18000010
18000011
18000012
18000013
18000014
18000015
18000016
18000017
18000018
18000019
18000020
18000021
18000022
18000023
18000024
Item No. Type 7
11
18
28
38
48
58
68
78
88
98
108
118
128
138
148
158
168
178
188
198
208
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
11
19
29
39
49
59
69
79
89
99
109
119
129
139
149
159
169
179
189
199
209
219
18000183
18000184
18000185
18000186
18000187
18000188
18000189
18000190
18000191
18000192
18000193
18000194
18000195
18000196
18000197
18000198
18000199
18000200
18000201
18000202
18000203
18000204
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
MINI
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
R+S
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
7
11
18
28
38
48
58
68
78
88
98
108
118
128
138
148
158
168
178
188
198
208
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
11
19
29
39
49
59
69
79
89
99
109
119
129
139
149
159
169
179
189
199
209
219
Universal Clamps PG 174
www.oetiker.com
Screw lock
Perforated steel band
Perforated band: universally applicable for various diameters and widths
Ratchet lock: installation and removal without tools
Screw lock: simple installation, high holding force
Various supply options: kit format, bulk or to customer specification
Universal Clamps
Product Group 174
Material
PG 174 All parts are stainless steel, Material no. 1.4301/
UNS S30400
Optional alternative materials
Series
Size range
≥ 35.0 mm
≥ 80.0 mm
≥ 80.0 mm
width x thickness
10.0 x 0.5 mm
18.0 x 0.8 mm*
30.0 x 0.7 mm**
** For use with 18 mm screw lock
** For use with 30 mm screw lock
The data in this catalog are based on many years experience. They are intended for reference, not as design specifications.
8
Universal Clamps PG 174
Screw lock 18 mm
www.oetiker.com
Ratchet lock
Clamp Design
Concept
Individual closure mechanism (screw or ratchet lock) combined
with perforated steel band – clamps can be round or have an
irregular form. Available as kits, in bulk or to customer’s specification. Special versions are available with integral tolerance
compensation and non-perforated band.
Universal clamps are available in standard widths and thicknesses.
The band dimensions should be chosen to give the necessary
radial force (clamping force) to ensure the required retention properties under the anticipated ambient conditions.
Perforated steel band
Assembly Recommendations
For installation of the Screw Lock, we recommend to use a
suitable flat blade screwdriver, or a socket wrench.
Static tightening torque
Screw lock for band width 10 mm: max.   3 Nm
Screw lock for band width 18 mm: max. 10 Nm
Screw lock for band width 30 mm: max. 20 Nm
9
Universal Clamps PG 174
www.oetiker.com
10
Assembly instructions
Screw lock type
Determine the clamp
length, e.g. wrap
around object to be
clamped and add
approx. 50 mm.
Cut off band to required
length. To avoid
possible injury remove
sharp edges with a
file and trim corners at
an angle.
Insert approximately
30 mm of band material
through the top of the
retaining slot and fold
backwards underneath
the remaining strip.
Position clamp over
object. Insert free end
of the band over the
hooks and under the
screw, protruding past
the body of the screw
lock. Engage the hooks
in the perforations at
the tightest possible
position.
Tighten the clamp
with a screwdriver or
hexagon wrench.
Cut off band to required
length. To avoid
possible injury remove
sharp edges with a
file and trim corners at
an angle.
Insert approximately
30 mm of band material
through the top of the
retaining slot and fold
backwards underneath
the remaining strip.
Place lever in open
position, pre-form the
end of the band to
match the curvature of
lock. Pass free end
under tongue and
through slot, so that the
end extends beyond
the lock body.
Position clamp over
object. With minimal
force, press free end of
band steel down and
ratchet the lever back
and fourth until tight.
Firmly lock the lever
down in the final retained position.
“Securing dimple”
prevents unintentional
opening.
Ratchet lock type
Determine the clamp
length, e.g. wrap
around object to be
clamped and add
approx. 50 mm.
The data in this catalog are based on many years experience. They are intended for reference, not as design specifications.
Universal Clamps PG 174
www.oetiker.com
11
Order information
Item No. Ref. No. Size range (mm)
Screw lock
Item No. Ref. No. Band length (m)
Perforated steel band
Compatible with band width 10 mm
17400003 540R/10- 17400002 540R/10+ 40 – 100
100 – …
Width 10 mm, material thickness 0.5 mm
17400067 501R/10 17400081 501R/20 10
20
Compatible with band width 18 mm
17400005 540R/18- 17400004 540R/18+ 80 – 150
150 – …
Width 18 mm, material thickness 0.8 mm
17400077 518R/10 17400079 518R/20 10
20
Compatible with band width 30 mm
17400006 540R/30+ 17400007 540R/30- 80 – 150
150 – …
Steel band
Ratchet lock
Compatible with band width 10 mm
17400063 504R/60- 17400064 504R/60+ 35 – 60
60 – …
Width 30 mm, material thickness 0.7 mm
17400101 530R/10 17400102 530R/20 10
20
Worm Drive Clamps PG 126 & 177
PG 126
www.oetiker.com
12
PG 177
Housing with screw
Housing saddle
Comply with DIN 3017: Embossed clamp band, large clamping range, high holding force
Short housing saddle: uniform radial load with good seal
Weld-free body connection: secure connection, good corrosion resistance
Specially formed strip edges: reduced risk of damage to parts being clamped
Worm Drive Clamps conform to DIN1 3017
Product Group 126 & 177
Material PG 126
W2 Band and housing: stainless steel
Material No. 1.4016/UNS S43000
Hexagon-head screw: steel, zinc-plated
Material PG 177
W4 All parts: stainless steel
Material No. 1.4301/UNS S30400
Series
Diameter range
width x thickness
  8.0 – 160.0 mm  9.0 x 0.6 mm
16.0 – 160.0 mm
12.0 x 0.7 mm
Other material qualities and diameter ranges on request.
Clamp design
Oetiker Worm Drive Clamps are technically advanced, multi-range
hose clamps, which cover a very wide range of clamping diameters. Hoses of differing diameters can be securely connected
with a single size.
Manufactured by cold-forming, the bands of these worm drive
clamps have a slightly curved form. The depth of the thread
impressions reduces to each side – the thread impressions have
their full depth in the middle.
Worm drive clamps in material quality W2 have a 7 A/F hexagonhead screw with cross recess (Phillips). Clamps in material
quality W4 have a hexagon-head screw (7 A/F) with a standard
screwdriver slot.
Recommended installation
For professional installation, we recommend using a flexible
screwdriver. This tool ensures safe installation even in hard-toreach locations. For series installation requiring high process
reliability, electronically monitored Oetiker controlled-torque
screwdrivers should be used.
1
DIN = Deutsches Institut für Normung
The data in this catalog are based on many years experience. They are intended for reference, not as design specifications.
Worm Drive Clamps PG 126 & 177
www.oetiker.com
Static tightening torque:
Clamping range B=9
8 – 20 2 + 0.5 Nm
From 12 – 160 3 + 0.5 Nm
From 16 – 160 Static test torque:
Clamping range B=9
8 – 20 max. 2.6 Nm
From 12 – 160 max. 4 Nm
From 16 – 160 13
B = 12
5 + 0.5 Nm
B = 12
max. 6.5 Nm
Order information
Item No. Ref. No. Size range (mm)
Worm Drive Clamps W2
Band width 9 mm, thickness 0.6 mm
12600257
12600258
12600260
12600262
12600263
12600265
12600266
12600268
12600269
12600270
12600271
12600272
12600273
12600274
12600275
12600276
12600277
12600278
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
8-12 C7 W2 10-16 C7 W2 12-22 C7 W2 16-27 C7 W2 20-32 C7 W2 25-40 C7 W2 30-45 C7 W2 40-60 C7 W2 50-70 C7 W2 60-80 C7 W2 70-90 C7 W2 80-100 C7 W2 90-110 C7 W2 100-120 C7 W2
110-130 C7 W2
120-140 C7 W2
130-150 C7 W2
140-160 C7 W2
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
Ref. No. Size range (mm)
Worm Drive Clamps W4
Band width 9 mm, thickness 0.6 mm
8
10
12
16
20
25
30
40
50
60
70
80
90
100
110
120
130
140
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
12
16
22
27
32
40
45
60
70
80
90
100
110
120
130
140
150
160
Worm Drive Clamps W2
Band width 12 mm, thickness 0.7 mm
12600298
12600299
12600301
12600302
12600304
12600305
12600306
12600307
12600308
12600309
12600310
12600311
12600312
12600313
12600314
Item No. 16-27 C7 W2 20-32 C7 W2 25-40 C7 W2 30-45 C7 W2 40-60 C7 W2 50-70 C7 W2 60-80 C7 W2 70-90 C7 W2 80-100 C7 W2 90-110 C7 W2 100-120 C7 W2
110-130 C7 W2
120-140 C7 W2
130-150 C7 W2
140-160 C7 W2
17700188
17700189
17700191
17700193
17700194
17700196
17700197
17700199
17700200
17700201
17700202
17700203
17700204
17700205
17700206
17700207
17700208
17700209
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
WD9
8-12 C7 W4 10-16 C7 W4 12-22 C7 W4 16-27 C7 W4 20-32 C7 W4 25-40 C7 W4 30-45 C7 W4 40-60 C7 W4 50-70 C7 W4 60-80 C7 W4 70-90 C7 W4 80-100 C7 W4 90-110 C7 W4 100-120 C7 W4
110-130 C7 W4
120-140 C7 W4
130-150 C7 W4
140-160 C7 W4
8
10
12
16
20
25
30
40
50
60
70
80
90
100
110
120
130
140
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
12
16
22
27
32
40
45
60
70
80
90
100
110
120
130
140
150
160
16-27 C7 W4 20-32 C7 W4 25-40 C7 W4 30-45 C7 W4 40-60 C7 W4 50-70 C7 W4 60-80 C7 W4 70-90 C7 W4 80-100 C7 W4 90-110 C7 W4 100-120 C7 W4
110-130 C7 W4
120-140 C7 W4
130-150 C7 W4
140-160 C7 W4
16
20
25
30
40
50
60
70
80
90
100
110
120
130
140
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
27
32
40
45
60
70
80
90
100
110
120
130
140
150
160
Worm Drive Clamps W4
Band width 12 mm, thickness 0.7 mm
16
20
25
30
40
50
60
70
80
90
100
110
120
130
140
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
27
32
40
45
60
70
80
90
100
110
120
130
140
150
160
17700229
17700230
17700232
17700233
17700235
17700236
17700237
17700238
17700239
17700240
17700241
17700242
17700243
17700244
17700245
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
WD12
Worm Drive Clamps W2B, W3, W5
Band width 9 mm and 12 mm
On request
Worm Drive Clamps PG 126 & 177
North America: PG 126
www.oetiker.com
14
North America: PG 177
Housing with screw
Housing saddle
Conforms to SAE J1508 Type “F” (only for the North American market):
Perforated band, large clamping range
Short housing saddling: even radial load
Robust housing connection: high radial loads
High quality materials: good corrosion resistance
Worm Drive Clamps North America
conform to SAE1 J1508 Type “F”
Product Group 126 & 177
Material 126
Band and housing are stainless steel materials
UNS 201/301, respectively
Hex-head screw is carbon steel, zinc-plated
Material 177
Band and housing are stainless steel materials
UNS 201/301, respectively
Hex-head screw is stainless steel, UNS 410
Series
Diameter range
3/8 – 7.0 in
10 – 178 mm
width x thickness
1/2 x 0.025 in
12.7 x 0.63 mm
Oetiker Worm Drive Clamps are suitable for numerous applications, for example for agricultural and forestry machinery, on ship
and marine applications, in maintenance, repair and operations
industries, etc. As a result of the generous clamping range, the
same size of clamp can be used for several joint diameters.
A choice of materials to suit the application makes them a practical
solution for the low and medium pressure ranges. Oetiker
Worm-Drive Clamps comply fully with the requirements of SAE
J1508 for Type “F” clamps.
Recommended installation
For professional installation, we recommend use of a flexible
screwdriver. This tool ensures safe installation even in hard-toreach locations.
Other material qualities and diamter ranges on request.
In series production where there are high process reliability
requirements, use of an electronically-monitored Oetiker torque
screwdriver should be considered.
1
SAE = Society of Automotive Engineers
The data in this catalog are based on many years experience. They are intended for reference, not as design specifications.
Worm Drive Clamps PG 126 & 177
www.oetiker.com
Item No.
14100316 Installation tool
Flexible srewdriver 5/16"
Recommended installation torque
Product Group 126
177 Torque (in-lb/Nm)
max. 30/max. 3.4
max. 35/max. 4.0
Minimum ultimate torque
Product Group 126
177 Torque (in-lb/Nm)
min. 60/min. 6.9
min. 60/min. 6.9
15
Order information
Item No. SAE Size No. Diameter
range (in)
Diameter
range (mm)
Item No. SAE Size No. Diameter
range (in)
Diameter
range (mm)
Worm Drive Clamps PG 126
Band width 1/2 in (12.7 mm), thickness 0.025 in (0.63 mm)
Worm Drive Clamps PG 177
Band width 1/2 in (12.7 mm), thickness 0.025 in (0.63 mm)
12600359   6
12600374   8
12600375  10
12600376  12
12600377  16
12600378  20
12600379  24
12600380  28
12600381  32
12600382  36
12600383  40
12600384  44
12600385  48
12600386  52
12600387  56
12600388  60
12600389  64
12600390  72
12600391  80
12600392  88
12600393  96
12600394
104
17700338   6
17700339   8
17700340  10
17700341  12
17700342  16
17700343  20
17700344  24
17700345  28
17700346  32
17700347  36
17700348  40
17700349  44
17700350  48
17700351  52
17700352  56
17700353  60
17700354  64
17700355  72
17700356  80
17700357  88
17700358  96
17700359
104
3/8 – 7/8
7/16 – 1
1/2 – 1 1/16
9/16 – 1 1/4
11/16 – 1 1/2
3/4 – 1 3/4
1 – 2
1 1/4 – 2 1/4
1 1/2 – 2 1/2
1 13/16 – 2 3/4
2 – 3
2 1/4 – 3 1/4
2 1/2 – 3 1/2
2 3/4 – 3 3/4
3 – 4
3 1/4 – 4 1/4
2 1/2 – 4 1/2
3 – 5
3 1/2 – 5 1/2
4 – 6
4 1/2 – 6 1/2
5 – 7
   9
  11
  13
  14
  17
  19
  25
  32
  38
  46
  52
  57
  65
  70
  78
  83
  64
  76
  89
102
114
127
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
  22
  25
  27
  32
  38
  44
  51
  57
  63
  70
  76
  82
  89
  95
101
108
114
127
140
152
165
178
3/8 – 7/8
7/16 – 1
1/2 – 1 1/16
9/16 – 1 1/4
11/16 – 1 1/2
3/4 – 1 3/4
1 – 2
1 1/4 – 2 1/4
1 1/2 – 2 1/2
1 13/16 – 2 3/4
2 – 3
2 1/4 – 3 1/4
2 1/2 – 3 1/2
2 3/4 – 3 3/4
3 – 4
3 1/4 – 4 1/4
2 1/2 – 4 1/2
3 – 5
3 1/2 – 5 1/2
4 – 6
4 1/2 – 6 1/2
5 – 7
   9
  11
  13
  14
  17
  19
  25
  32
  38
  46
  52
  57
  65
  70
  78
  83
  64
  76
  89
102
114
127
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
  22
  25
  27
  32
  38
  44
  51
  57
  63
  70
  76
  82
  89
  95
101
108
114
127
140
152
165
178
Download PDF
Similar pages
WBW M Wash Down Scales
WBW M Wash Down Scales
WBWa Wash Down Scales
WBW M Wash Down Scales
WBW Wash Down Scales
WBW M Wash Down Scales