Side Mount LED Docking/Back-up Light Installation

Side Mount LED Docking/Back-up Light Installation Instructions
(Part # 69389)
Product Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
*Disconnect power before installing, adding or changing any component.
*To avoid a hazard to children, account for all parts and destroy all packing materials.
*Do not install any luminaire assembly closer than 6" from any curtain or other combustible
material.
SERVICE
There are no user-serviceable parts inside. Opening unit will void warranty.
WARRANTY
For information on our warranty policy please visit our website at http://www.itc-marine.com/resources/warranty/
Installation Instructions:
Step 1: Remove bezel if not already disassembled.
Step 2: Determine the installation location for your light. Once determined drill a 0.5” hole.
Step 3: Connect wires to power source - if the wires on the light are red/black the red is positive
and black is neutral.
Step 4: Feed wires back through the hole and screw the light in place using the screws provided.
Step 5: Reattach bezel.
**All electrical connections should be made inside a watertight junction box.
3030 Corporate Grove Dr • Hudsonville, MI • 49426
Phone: 616-396-1355 • Fax: 616-396-1152 • www.itc-us.com • sales@itc-us.com
Revision Date: 1/11/18