High Efficiency eF Series® Light Duty Commercial Power Vent Gas Water Heater 90%+ Thermal Efficiency Photo is of LC2PV50H763N FEATURING: The Light Duty Commercial ef Series® Model features: n Vertical, Dual-pass Heat Exchanger System—Vertical design eliminates corrosion protection challenges of condensing water heaters that utilize less durable heat exchanger designs. --Highly efficient, helical-finned 5" primary heat exchanger tube and three, stainless steel baffled, 2" secondary heat exchanger tubes. n Self-priming Condensate Tee—No need for trap installation. Internal condensate trap height appropriate for condensate pump use where necessary. n Power Vent—Powerful yet quiet design for greater resistance to outside winds and greater vent lengths for difficult venting situations through the roof or side wall. 10 ft. power cord included (120 VAC). n Horizontal and Vertical Venting—With 2", 3" or 4" PVC, ABS, CPVC, or PP. n Bradford White ICON System™—Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot. This results in savings of pilot gas during standby periods (120 Vac). --Enhanced Performance—Proprietary algorithms provide enhanced hot water delivery and tighter temperature differentials. --Advanced Temperature Control System—Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels. --Intelligent Diagnostics—An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting. n Hydrojet® Total Performance System—Cold water inlet sediment reducing device helps prevent sediment build up in tank. This increases hot water delivery while minimizing temperature build up at top of tank. n Vitraglas® Lining—Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas) is fused to the steel surface by firing at a temperature of over 1600°F (871°C). --Interior and exterior of the three, 2" secondary heat exchanger tubes are protected with Vitraglas®. n 2" Non-CFC Foam Insulation—Covers the sides, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity n Pedestal Base. n Water Connections—3/4" NPT factory installed true dielectric fittings. n 3/4" NPT Side Connections. n Factory installed Heat Traps—Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation. n Two Protective Anode Rods. n T&P Relief Valve—Installed. n Low Restriction Brass Drain Valve. 3 or 5-Year Limited Tank Warranties / 3 or 5-Year Limited Warranty on Component Parts. For more information on warranty, please visit www.bradfordwhite.com For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete copy of the warranty included with the heater. MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821; 6,442,178; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Vitraglas® and Hydrojet® are registered trademarks of Bradford White® Corporation. 1704-A-0716 High Efficiency eF Series® Light Duty Commercial Power Vent Gas Water Heater High Efficiency Model NATURAL GAS AND LIQUID PROPANE MODELS Model Number Capacity Recovery at 100°F Rise* LP Nat. Nat. Nat. LP LP U.S. Imp. BTU/Hr. BTU/Hr. U.S. Imp. U.S. Imp. Input Gal. Gal. Input GPH GPH GPH GPH LC2PV50H763N Model Number LC2PV50H763N 50 42 76,000 76,000 83 Capacity 69 83 Recovery at 56°C Rise* Liters Nat. kW Input LP kW Input Nat. Liters/ Hour LP Liters/ Hour 190 22.0 22.0 314 314 69 A B Floor to Jacket Vent Dia. Conn C Vent Size D Floor to T&P Conn. F E Floor to Floor to Top of Gas Conn. Heater G Floor to Water Conn. H Depth in. in. in. in. in. in. in. in. 67 1/4 24 2 46 1/2 13 5/8 56 1/4 57 1/2 273/8 C Vent Size D Floor to T&P Conn. G Floor to Water Conn. H Depth A B Floor to Jacket Vent Dia. Conn E F Floor to Floor to Gas Top of Conn. Heater mm. mm. mm. mm. mm. mm. mm. mm. 1708 610 51 1181 346 1429 1461 695 Approx. J K Floor to Floor to Shipping Space Space Weight Heating Heating Inlet Outlet lbs. in. in. 15 5/8 461/2 225 Approx. J K Floor to Floor to Shipping Space Space Weight Heating Heating Inlet Outlet kg. mm. mm. 397 102 1181 Propane models feature a Titanium Stabilized Stainless Steel propane burner. For propane (LP) models, change suffix”N” to “X”. *Based on 90.5% Thermal Efficiency. C H A G B F D&K E J LC2PV50H763N Max. Equivalent Length Min. Equivalent Length Number 1 of 2 90° Elbows 3 2" Vent Pipe 3" Vent Pipe †50 ft. 7 ft. 45 ft. 40 ft. 35 ft. †120 ft. 15 ft. 115 ft. 110 ft. 105 ft. 4" Vent Pipe †180 ft. 15 ft. 175 ft. 170 ft. 165 ft. Subtract 5ft. for each additional 90° elbow. †For high altitude installations, consult the installation instructions. Meets NAECA Requirements. General: All gas water heaters are certified at 300 PSI test pressure (2068 kPa) and 150 PSI working pressure (1034 kPa). All water connections are 3/4" NPT (19mm) on 8" (203mm) centers, all gas connections are 1/2" (13mm). All models design certified by CSA International (formerly AGA/CGA), ANSI standard Z-21.10.1 and/or 10.3 and peak performance rated. Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement. Suitable for Water (Potable) Heating and Space Heating. Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this system. This unit may NEVER be connected to any existing heating system or component(s) previously used with a non-potable water heating appliance. Ambler, PA For U.S. and Canada field service, contact your professional installer or local Bradford White sales representative. Sales 800-523-2931 l Fax 215-641-1670 / Technical Support 800-334-3393 l Fax 269-795-1089 l Warranty 800-531-2111 l Fax 269-795-1089 International: Telephone 215-641-9400 l Telefax 215-641-9750 / www.bradfordwhite.com Sales / Technical Support 866-690-0961 / 905-238-0100 l Fax 905-238-0105 / www.bradfordwhite.com ©2016, Bradford White Corporation. All rights reserved. 1704-A-0716 Printed in U.S.A. J Floor Wat Conn in.