ATLANTIC 1650

ATLANTIC 1650
New Hot & Cold laminator
THERMAL LAMINATION
• Use of thermal encapsulation films up to 320 microns
COLD LAMINATION
• Single side lamination with or without waste paper
• Simultaneous single side lamination
and adhesive mounting
• Encapsulation with cold film in one run
• Application tape
• Colour background using colour vinyl
• Mounting onto boards up to 50 mm (2’’) thickness
➤ Speed up to 6,20 m/mn (21 ft/mn)
➤ Mounting up to 50 mm (2’’) thick.
➤ Hi-capacity hot and cold laminator up to 140°C (280°F)
➤ Working width 165 cm (65”)
Atlantic 1650
Mounting up to 50 mm (2”)
10 speed
Diameter 23 cm (9”),
film reel 100 m (110 yd)
Maximum thickness document + board
50 mm (2“)
Maximum working width
171 cm (67”)
Maximum film width
165 cm (64”)
Maximum length of the film reels
100 m (maximum diameter 23 cm/9’’)
Diameter of the rollers
maximum 120 mm (4.7”)
Temperature
independant heat on top and bottom up to 140°C
Heating time from 20°C to 100°C
30 mn
Number of self blocking shaft delivered
5 + 1 unwinding shaft
Adjustable speed m/mn
from 0,3 to 6,3
Adjustable speed ft/mn
from 0,9 to 21
Power W
3600
Voltage 230 V / 50-60 Hz
Amperage
Dimensions of the machine 16A/230 V
(cm)
(inch)
W 206 x D 82 x H 153
W 81” x D 32” x H 60”
Net weight of the machine
300 kg
Shipping dimensions of the machine (cm)
(inch)
W 213 x P93 x H 170
L 84” x P 37” x H 66”
Machine weight for shipping Warranty
370 kg
1 year
Made in France, CE certified in compliance with the Machine and the
Electromagnetic Compatibility Directives CEM.
Roll to Roll system delivered as standard
with the machine.
www.kala.fr
Nous nous réservons le droit de modifier sans préavis les modèles présentés, ainsi que leurs équipements et caractéristiques techniques - KALA SAS - NOUVELLE NORME - AJ1691
Sp ec i f i c at i o n s