key features key specifications - Hyundai Commercial Vehicles

KEY FEATURES
KEY SPECIFICATIONS
Driver’s Suspension Seat
(EX4) GVM
4,500kg
GCM 8,000kg
Smart Key Entry with Security System
(EX6) GVM
6,500kg
GCM 10,000kg
Four Wheel Disc Brakes
Wheelbase
3,400mm
Vehicle Dynamic Control (VDC)
Engine
3.9L, Diesel Turbo Euro 5
High Power Assist Brake (HAB)
Pantech Size
4,200L x 2,390W x 1,900H
Hill Start Assist Control (HAC)
Max Power
103KW (140HP) / 2,700RPM
Max Torque
392NM / 1,400 RPM
ENGINE & DRIVELINE
● ENGINE EURO 5 COMPLIANT
Engine
● SAFETY FEATURES
4 Cylinder 16 valve SOHC
- Vehicle Dynamic Control (VDC)
- Electronic Stability Control (ESC)
- High Power Assist Brake (HAB)
- Anti-lock Braking System (ABS)
- Easy Hill Start (EHS)
- Traction Control System (TCS)
- Engine Drag Control (EDC)
- Electronic Brake Force
Distribution (EBS)
Displacement
3,933cc
Max Power
103KW (140HP) @ 2,700 RPM
Max Torque
392Nm / 1,400rpm
● BRAKES
Turbocharger
Intercooler Turbo Charger
Front
Disc
Diameter Rear
330 mm
Compression Ratio
17.0 : 1
Bore x Stroke
103mm x 118mm
Injection System
Denso Common Rail System
Exhaust Brake
Vacuum operated, butterfly valve type
Emission Control
System
Cooled EGR Particulate Matter
Catalyst
Parking Brake
Internal expanding type on propeller
shaft at rear of transmission
330 mm
- 4 Wheel Disc with VDC
- Disc Pad Wear Indicator
- Requires 20.7m to a full stop from 60 km/h
Hydraulic with vacuum servo
Service Brake
assistance dual circuit
● ELECTRICAL
● PERFORMANCE
PERFORMANCE (Calculated)
STANDARD CAB MEDIUM
Type
24V electrical system
Speed at Max. Engine Speed
132KPH
Batteries
2 x MF90AH maintenance free batteries
connected in line
Grade Ability at Rated GVM
53.5%
Alternator
24V, 55Amp
Grade Ability at Rated GCM
29.7%
Min Turning Cycle (m)
Starter Capacity
50KW Starter Motor
12.6
12V Power Outlet
12V maximum, 36W
● TRANSMISSION (MO35S5)
● CLUTCH
Type
Type
Hydraulic control, diaphragm spring
single dry plate and pre-damper
Disc Diameter
300 mm
5 speed manual Synchromesh on gear 1~5
1st
2nd
3rd
4th
5th
Rev
Gear Ratio
PTO Opening
PTO provision on LHS of transmission case
Rear
● PROPELLER SHAFT (DS300)
TYPE
Tubular, forged steel ends without
centre bearing
● WHEELS AND TYRES
● AXLES
Front
5.380
3.028
1.700
1.000
0.722
5.380
Type
Reverse Elliot I-Beam
Capacity 2,760 kg
Type
Tyre Size
Full Floating Type
Capacity 4,700kg
Final Drive Ratio
Wheels Type
4.625 : 1
Single Front, dual rear
17.5 x 5.25, 6 Stud
205/75R 17.5 Front x 2
205/75R 17.5 Rear x 4
Tyre Rating
Steer 1,450kg x 2
Drive 1,400kg x 4
Spare Wheel Tyre
1 Mounted
CAB & CHASSIS EQUIPMENT
● CAB INTERIOR
● CHASSIS FRAME
Driver’s Seat
Ergonomic adjustable suspension seat
Type
Passenger Seats
Two seat capacity, independently
adjustable seats with a storage console
Side Rail
Seat Headrest
Height adjustable headrest ‘s
Steering Wheel
Cruise Control
Interior Finish
Air Conditioning
Audio
Tilt & telescopic adjustable steering
wheel column, audio controls with
hands free
Auto integrated - Steering Wheel
Mounted
Fully cloth, padded roof lining and all
weather PVC flooring covering
H frame with channel sectional side rail
& Cross Members
Reinforced with outer stiffeners.
Main section side rail dimensions:
183mm x 60mm x 6.0mm
● SUSPENSION
Front
Fully integrated with heater and defrost
modes, 4 speed fan
System supports Bluetooth, USB, CD
player, Radio, MP3 and AUX
Rear
Type
Semi-elliptic laminated
leaf springs
Size x Leaves
1200 x 70 x 10t-4, 11t-1
Shock Absorber
Gas filled telescopic type
Type
Semi-elliptic laminated
leaf springs
Size x Leaves
1250 x 70 x 10t-5, 11t-1
Rear Spring Helper
990 x 70 x 16t-2
Windows
Electric operated
Power outlets
1 x 12v, 1 x 24V
Keyless Entry
With control door locking and Anti-theft
Smart Key
Interior Lamps
2 x 10Watt & 1 x 30Watt
Type
SIWS
Service Indicator Warning System
Sun Visors
Driver’s and passenger’s
Inside
Maximum Wheel
Angle
Outside
Wheel
Grips
Door and side pillar entry assist grips
● STEERING
4 spoke ball and nut type with
telescopic steering column
44.5⁰
32.0⁰
● FUEL TANK
● CAB EXTERIOR
Type
Frame mounted steel with a lockable
fuel cap
Capacity
100L
Cab Mounting
Semi-floating
Windshield
One piece laminated
Windscreen
Wipers
Dual electric 3 speed with washer
● REFRIGERATION UNIT: Thermal Master 2500
Side Glass
With inbuilt UV ray protection
Temperature Range
0 to -18⁰C
Side Mirrors
Heated main vision mirrors
Standby Motor
Electric with 20 amp Power Cable
Headlights
Vertical styled with turn signals
Defrost
Automatic & manual hot gas defrost
Fog Lamps
Projection type with daytime running
lights
Condenser
Aluminum fin & Copper tubes
Reverse Alarm
Standard feature
Evaporator
Aluminum fin & Copper tubes
Reversing Camera
Screen mounted 7” LCD Colour
Display
Voltage
12 / 24 volts
DIMENSIONS & WEIGHTS
● WEIGHTS (KG)
● DIMENSIONS (MM)
DIMENSIONS (MM)
Wheelbase
Overall Length
Overall Width
Overall Height
Front Overhang
Rear Overhang
Front Track
Outside Rear Track
Rear Frame Width
Chassis Height at Rear Axle
Cab to Axle
Cab to End of Frame
STANDARD CAB MEDIUM
3,400
WEIGHTS (KG)
Gross Vehicle Mass(EX4/6)
Gross Combination Mass(EX4/6)
Front Loading Limit
Rear Loading Limit
Total CAB Chassis Mass*
Front CAB Chassis Mass
Rear CAB Chassis Mass
6,110
2,028
2,335
1,125
1,585
1,680
1,575
STANDARD CAB
MEDIUM
4,500 / 6,500
8,000 / 10,000
2,400
4,100
2,495
1,650
845
753
790
2,810
4,340
● PANTECH SPECIFICATIONS
Factory Pantech
Dimensions (Internal)
Floor Type
Load Restraint System
Rear Door/s
Rear Step
Entry Assistance
24/7 ROADSIDE ASSISTANCE
You’re never alone on the road in
a Hyundai EX series truck. When you’re
covered by Hyundai’s 24/7 nationwide
truck roadside assist, you’ll never find
yourself stranded
Standard Cab Medium
4200 (L) x 2390 (W) x 1900 (H)
Checker Plate
E-Track Belt (Optional)
Barn Door Type (2)
Wide Aluminum
Grab Handles (Left Side & Right Side)
24/7 TRUCK
ROADSIDE
ASSISTANCE
BEST IN CLASS WARRANTY
Wherever you and your load go in a
Hyundai EX Series truck, the roads are
paved with the peace-of-mind Australia’s
best-in-class 3-year 200,000km warranty.
BEST IN CLASS
3YEAR
200,000km
WARRANTY
Hyundai Commercial Vehicles Australia (HCVA) 376 Edgar Street, Bankstown NSW 2200
Hyundai Commercial Vehicles Australia (HCVA) reserves the right to alter vehicle specifications and equipment levels without notice. Some
equipment featured on the vehicle in this brochure may not be available in Australia or may be optional to the extent permitted by the law. HCVA
shall not be liable to any person as a result of reliance on the content of this brochure.
Please consult your Hyundai Commercial Vehicle Dealer for the latest specifications, equipment levels, options, prices, colours and vehicle
availability. Metallic Paint is an optional extra. Note: Information in this brochure is current as at 08/06/2017