Quick Start Guide
123
PROFESSIONAL SECURITY MADE EASY
Statement
Unplug modem then connect router and device
Thank you for purchasing this product. ZOSI is committed to providing our customers with a high quality, reliable
security solution. ZOSI cannot assume responsibility for any consequences resulting from the use thereof.
DSL/CABLE
MODEM
D: Configure the following
1
DSL/CABLE
MODEM
DSL/CABLE
MODEM
Before Installation
DSL/CABLE
MODEM
ROUTER
Name: Choose a name for your system of your choice.
Enter the Device ID or Scan QR Code
1
ROUTER
ROUTER
This product may require cabling. It is strongly suggested to test all products and parts before installation and cabling.
2
DVR
2
Applications
The system is a standalone system. It need to connect with any monitor to start live view (Such as PC monitor, TV etc.)
By adding a 3.5” SATA hard drive to the DVR, you can record&playback videos.
By connecting the DVR to the Internet, you can view the cameras anywhere anytime.
Note
This instruction is used to guide you install the system and remote surveillance, more instructions and details can be
downloaded from the CD which come with DVR.
Tech Support
Website: www.zositech.com
2
1
3
3
4
4
Note: The QR Code & Device ID printed on the label.
B: How to test your DVR's network ?
3
(1) Right click Mouse > Go to Main Menu > Setup > Network
(2) Tick 'Obtain IP address automatically'
(3) Click 'Test', if 'OK' is displayed, the network is connected successfully.
Note: Please ensure DHCP in your router is open.
4
5
6
Email: service@zositech.com
1. Connecting your system
User ID: Enter the DVR’s User Name (default: admin)
Password: Enter the DVR’s Password (default: No
password required, just leave blank)
Device type: Choose DVR’s Channel
Tap Save
E: Tap
go back to Main Menu > Tap Live Preview > Tap
5
6
to select paly camera > Tap Start preview.
The app opens in Live View and streams video from all connected cameras.
1
Camera
3
Router
5
Power
Step 2 Download App
Search ZOSI VIEW in App store or Google Play.Or Scan the QR Code to download the App.
8 channel configuration shown. 4/16 channel will have
ZOSI VIEW
the respective number of video inputs.
*Not included/sold separately
1
2
3
4
5
2
Monitor/TV
4
App store
Google play
1
2
3
4
Mouse
Step 3 Run
Run the App
Connect
Connect the Camera to DVR and Plug Camera to power.
Connect
Connect monitor to the DVR with HDMI,VGA,BNC port
Connect
Connect the DVR to Router with an Ethernet cable
Plug
Plug the mouse to the USB port
Plug DVR to power
A: IInstall
nstall the free Z
ZOSI
OSI VIEW App.
B: Tap I want register aand
nd enter your User name and password to create a new account.
C:: Login the App, Tap M
C
Manage
anage Device > Tap + button.
button.
Within seconds, you should see cameras’ image live view on screen.
Within
3. View on PC Client Software
Download ZOSI VIEW PC Client Software from CD, install
Download
aand
nd start it as below picture.
Enter main interface, and show it as following
User Name: admin
Password: No password required, just leave blank
Note: TToo protect your privacy, please right click Mouse > Go to Main Menu > Setup > Users to change your password.
2. View on Smartphone
Step 1 Connect the DVR to the Internet
Account: same as the ZOSI VIEW account in smartphone
A: How to connect DVR to LAN ?
Password: same as the ZOSI VIEW account in smartphone
RJ45 cable
Fibre Optic
DSL
DVR/NVR
Router
WIFI or RJ45 Cable
PC
Remark: The PC operation has the same 'create' &
'Delete' function as the Smartphone ZOSI VIEW.
Quick Start Guide
456
PROFESSIONAL SECURITY MADE EASY
REC
4. Record video
The system may not include Hard Disk depending on the kit you selected. This system works with most 3.5”
SATA Hard Disk or 2.5” SATA Hard Disk.
1. Install a Hard Disk (if your system has preinstalled Hard Disk, please skip this step)
Previous Record: Move to last recorded event
Fast
Forward
Play/Pause
Next Record: Move to next recorded event
Fast Forward: video can be played at different speed, from
1/4 times to 16 times.
Previous Next frame
frame
2. Blocks of time to be recorded can also be set up by double clicking on a field adjacent to a day. Multiple schedules
can be created and saved with start and stop times down to the minute. These can then be applied to multiple days and
cameras.
Rewind: Video play can be rewinded at 1 time, 8 times, 16
times and 32 times.
Previous Record
Rewind
Screen Display Mode: Both single-screen and multi-screen
are available. You can choose how many channels you want
to playback one time.Channel without records presents
blank screen.
Multi-screen display
Single-screen display
①
②
③
④
Next Record
Note:
Recording Priority: Alarm Recording > Motion Detection Recording > Manual Recording > Time Scheduled Recording.
6. Motion Detection
Set motion Detection,DVR will record only when motion or movement is detected.
Right click mouse > Main Menu > Setup > Alarm > Motion > Motion detection.
The system records when motion is detected by the camera.
An icon is shown when motion is detected.
Select Camera. Tick the Channel you want to record on
motion detection.
Holding Time. Set recording time length after motion stop.
Trigger. Multi-channels can be set to record when detect
the motion by one of cameras.For example,when camera 1
detects motion,camera 2 and camera 3 can be triggered to
record as well.
Area. It is allowed to set sensitivity area of camera viewing
range.
① Unplug your DVR from power, unscrew and remove the top cover.
② Connect the SATA power and data cables from the DVR to the corresponding ports on your Hard Disk (as shown).
③ Place the Hard Disk into the DVR. Any cable should cross up over the Hard Disk.
④ Holding the Hard Disk and the DVR, gently turn it over and line up the holes on the Hard Disk with the holes on the
DVR. Using a Phillips screwdriver, screw the provided screws into the holes. Assemble the cover.
Note:
After installing a Hard Disk, you need to first format the Hard Disk before recording.
Right click the mouse > go to Main Menu > Disk Management > Select the Hard Disk > Click Format > Apply.
Click Trash Box
to remove sensitivity area;
Click and drag mouse to draw or erase the sensitive area.
Right click mouse > Go to Main Menu > Setup > Record
You shall see the record settings for all channels. Change the record setting according to your preference and apply the
changes.
Get into system M
Get
Main
ain Menu > Search,
Search, system presents picture as following.
1. Plug an USB flash disk to your DVR’s USB port.
2. Right click the mouse > Main Menu > Backup > choose the channel and time period > Search > Choose the video clips
you want to backup > Click Backup.
to make the whole viewing range as
Click STAR
sensitivity area;
2. Record video
5. Playback video
8. Backup the video for memory
Click to save setting
Click to exit
As Color and luminance is important for sensitivity, so it's necessary to adjust its value at specific conditions. The default
vvalue
alue is 4 while value range is from 1 to 8.
Right
R
ight click mouse to show or hide control menu at screen bottom.
Test
T
est the setting by moving something or some one walk through grid area within camera view range. If DVR detects
movement
m
ovement within grid area, a yellow hunanoid figure would be presented in the screen. The grid could not cover flag,
ttrees
rees or some other flow objects in the wind to avoid false alerts.
9. Upgrade the DVR
IfIf your DVR need to upgrade , please contact us to get a
upgrade software.
Step 3. Restart DVR(Power off and on), it will be
upgraded automatically.
Put
ut software into U-Disk, and ensure software is
Step 1. P
at root directory as below.
at
7. Time scheduled Record
Set Time scheduled record, you may configure each channel to record at specific times based on time of day.
Set
Right click the mouse > go to Main Menu >Setup > Schedule.
Right
The schedule for automatic recording can be set either of two ways.
1. By highlighting individual hours for specific days
by using the pencil tool in the upper right of the
window. The adjacent eraser tool removes the
highlighting in a block. click on either the pencil or
eraser tool to turn them off.
Search the video you want via time or Event, then play it.
Select the channel
Note: Please wait for a few minutes until DVR
interface presents.
Step 2. Put U-Disk into DVR port USB2.0.
Unplug the mouse from the front USB socket.
Settings can be copied and applied to any or all of the
channels and to any other day.
Start playing
ZS V16.9