RS4500 - Supercheap Auto

120W Car PolisherEN
RS4500
RS4500
3
1
2
5
4
A
B
D
E
flat
nozzle
C
F
120W Car Polisher
EN
COMPONENT LIST
1
Terry-cloth bonnet
2
Handle
3
On
/ Off switch
4
Sponge pad
5
Applicator
bonnet
* Not all the accessories illustrated or described are included in standard delivery.
ACCESSORIES
Terry-cloth bonnet
Applicator bonnet
1
1
We recommend that you purchase your accessories
from the same store that sold you the tool. Use good
quality accessories with a well-known brand name.
Choose the type according to the work you intend to
undertake. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
safety InstructionS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause you to
lose control.
4
2. Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric
shock.
3. Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
b) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
120W Car Polisher
c) Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
e) Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices
can reduce dust-related hazards.
4. Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts and
any other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
EN
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work to be performed. Use of the power tool for
operations different from those intended could result in
a hazardous situation.
5. Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
Additional safety instructions
for your car polisher
1. Check that speed marked on the wheel is equal to or
greater than the rated speed of the polisher.
2. Inspect the sponge pad before use. Do not use
chipped, cracked or otherwise defective products.
3. Ensure that the bonnets are fitted in accordance
with the manufacturer’s instructions.
4. Ensure that the bonnet is correctly mounted and
tightened before use and run the tool at no-load for
30 seconds in a safe position. Stop immediately if
there is considerable vibration or if other defects
are detected. If this condition occurs, check the
machine to determine the cause.
5. Ensure that sparks resulting from use do not create
a hazard e.g. do not hit persons, or ignite flammable
substances.
6. When cleaning, personal protective equipment such
as gloves and apron should be worn.
7. The wheel continues to rotate after a short period of
time. And it will stop soon.
8. Do not use the polisher as a fixed tool.
5
120W Car Polisher
Symbols
applications of polish, repeat as above. The pad cover
will not adsorb as much when reloading.
3. Switch (see Fig.C)
Always start and stop the polisher on against the car
surface. Push the switch to on position to start the
polisher, off position to stop the polisher.
Read the manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
RCM approval mark
Technical data
Rated voltage
240 V ~ 50Hz
Rated power
120W
Rated no load speed
3500/min
Polishing pad
Φ240mm
Protection class
/II
Weight2.17kg
Sound pressure level
58dB(A)
Sound power level
72dB(A)
Vibration level
14.8m/s2
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
1. Place terry-cloth bonnet (see Fig.A)
Place terry-cloth bonnet securely over sponge pad.
2. Spread the polish (see Fig.B)
Spread about a tablespoonful of polish evenly over the
entire surface of the pad cover. Do not apply polish
directly to car. This first application should do about
1/3 of an average size car. For the second and third
6
EN
4. To use the car polisher (see Fig.D)
Hold extension lead over shoulder and do flat surfaces
first ie: bonnet boot and roof. Cover areas quickly with
broad sweeping strokes in a crisscross pattern. Do
not press down on polisher. The machine’s action, not
pressure, does the best job.
5. Work next on smaller surfaces (doors etc.)
(See Fig.E)
Always keep the mains lead over the shoulder or let it
hang to the ground when working on a vertical surface
marking sure it is well clear of the moving polishing
head. For less accessible surfaces (such as wing
mirrors, door handles) remove the polishing bonnet and
polish these areas by hand.
6. Final work (See Fig.F)
Finally remove the terry-cloth bonnet and fit the
applicator bonnet onto the polisher (see Fig.A). Use
long, sweeping strokes in a criss-cross pattern to bring
out the shine. Do not press hard. Let the polisher do the
work polishing.
Working hints for your
polisher
1. At all times, let the polisher do the work-do not
force it or apply excessive pressure to the polisher.
Preferably, use a light circular motion.
Pressing too hard will slow down the machine’s
movement and affect the quality of the work.
2. The most common error, however, is applying too
much wax. If pad absorbs too much wax, it will not last
as long, and polishing is more difficult and takes longer.
3. If bonnet continually comes off pad, please try with a
new bonnet.
4. If wax seems difficult to buff, you may have used too
much wax.
120W Car Polisher
EN
Maintenance
WARNING: Remove the plug from the socket
before carrying out any adjustment, servicing
or maintenance.
Your power tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage
your power tool.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
TROUBLESHOOTING
1. If your power tool does not start, check the plug on
the power supply first.
2. If the polisher does not abrade surface, chec the
bonnet. If the bonnet have been worn, replace the new
bonnet and try again.
3. If a fault can not be rectified, return the tool to an
qualified person for repair.
Staple your purchase receipt here
Before returning this product for
warranty or any other reason, please call.
POSITEC AUSTRALIA PTY LIMITED
ABN 14 101 682 357
Unit 15, 23 Narabang Way Belrose 2085 NSW Australia
FREE CALL 1300 889 028
EMAIL:office.sales@positec.com.au
7
Copyright © 2010, Positec. All Rights Reserved.
2SBP001PK11000A1
Made In prc