Focal Shape Twin Specification

Focal Shape Twin Specification
SHAPE TWIN
Product Data Sheet
MADE IN FRANCE
Shape Twin is the standard bearer of the Shape series and stands out through its excellent rendering of the whole
audio spectrum, in addition to its broad frequency response in the low end, and to its high SPL considering its
size. The compact design makes it easy to integrate, even into the most cramped of rooms. Its 2.5-way design
gives it a decisive advantage when it comes to controlling the bass and lower mid-range registers which are the
hardest to control in small rooms. This monitor will express its full potential from a listening distance of three
feet away (1 metre).
MDF cabinet with
natural walnut
veneer
5" (13cm) Flax
sandwich cone for
the 40Hz – 2.5kHz
frequency range
1" (25mm) 'M'shaped Aluminum/
Magnesium inverted
dome tweeter
5" (13cm) Flax
sandwich cone for
the 40 – 180Hz
frequency range
XLR and RCA inputs
Adjustable bass
and treble
Adjustable crossover
at 160Hz
8" (21cm) double
passive radiator
Releasable
high-pass filter
TMD suspension
Neutral Inductance
Circuit (N.I.C.)
Three Class AB
amplifiers
Key points
• Tweeter with very low directivity for a flexible sweet spot
• Designed without a port (double passive radiator) allowing it to be placed near a wall
• 2.5 channels to provide optimal control of bass and low mid-range registers
• Numerous settings for optimal integration
• Accurate control, even in the very high frequencies
• Flax sandwich cone: controlled and articulated bass, natural and detailed lower mid-range and upper
mid-range registers
• Fastening mechanisms for mounting to the ceiling or a wall (fastening accessories not supplied)
Focal® is a trademark of Focal-JMLab® - www.focal.com - SCAA171219/2
SHAPE TWIN
Product Data Sheet
System
SHAPE TWIN
• Frequency response (+/- 3dB)
40Hz - 35kHz
•M
aximum SPL
(of musical signals)
110.5dB SPL
(peak at @ 1m)
MADE IN FRANCE
171124-SHAPE_TWIN
Electronics
Type
RCA connectors
•M
id-range
and low frequency amplifier
• High frequency amplifier
Off
•A
utomatic
standby
Deactivate
standby
Voltage
•Power supply
Connexion
High-pass filter
• Settings
XLR: balanced 10 kOhms
unbalanced 10 kOhms with sensitivity
compensation
2 x 80W, class AB
50W, class AB
Approximately 30 minutes
with no signal
Signal detection > 3mV
220-240V (fuse T2AL / 250V) or
100-120V (fuse T3.15AL / 250V)
IEC connector
and detachable power cable
Adjustable, +/-6 dB
Midrange/bass
(160 Hz, Q=1)
Adjustable, +/-3 dB
Treble level
(4.5 - 35kHz)
Adjustable, +/-3 dB
Power on/off
On/off switch on rear panel
• Displays and controls
70 mm
Adjustable Full range 45/60/90Hz
Bass level
(0 - 250Hz)
• Power consumption in standby
2 x M6
< 0.5W
LED for power on/off and standby
246 mm
• I nputs /
Impedance
Transducers
• Woofers
2 x 5" (13cm)
Flax Cone woofers
• Tweeter
1" (25mm) 'M'-shaped
Aluminum/Magnesium
Cabinet
• Construction
0.6" (15mm) MDF
• Finish
Vinyl, real walnut and black paint
•D
imensions including 4 rubber
feet (HxLxD)
18.8 x 8.3 x 11" (478 x 211 x 279mm)
• Weight
24lbs (11kg)
Recommended mounting kits
• Wall mounting kit
K&M® 24471 + K&M® 24359 adapter
• Ceiling mounting kit
K&M® 24496 + K&M® 24359 adapter
Focal® is a trademark of Focal-JMLab® - www.focal.com - SCAA171220/3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement