Ultimate Access XL/Series E - AV-iQ

Ultimate Access XL/Series E - AV-iQ
Ultimate Access XL/Series E
Specifications—Ultimate Access XL/Series E
projection screens, size
h. x
w., for recessed ceiling mounting.
Electrically operated 60 hz., 110-120 v AC, 5-wire motor mounted inside screen roller, instantly reversible, lifetime lubricated, with internal
thermal overload protector and electric brake with preset limits. Case
finished white. Case is constructed of steel, except side trim flanges
and access door are aluminum. Endcaps are stamped steel. Bottom of
case consists of an independently motorized trap door that opens up
inside the screen case. The trap door and the access door both hinge
downward to allow access to inside of screen case. The doors remain attached to
the screen case via a concealed full-length hinge. Releasing latches at the center
and each end of screen case allows the doors to hinge downward and a prop arm at
each end may be pivoted to engage with endcaps, keeping the door assembly in its
fully open position. Internal junction box allows case to be installed and pre-wired to
building supply. Junction box to have two plug-in style connectors, mating with connectors from motorized roller/fabric assembly and motorized door assembly. Case
flange to trim edges of ceiling opening. Case may be mounted with 3/8" threaded rod
through mounting brackets. Mounting brackets slide in 18" long channels on top of
case, allowing brackets to be moved to avoid interference with conflicting building
structures. Brackets must be locked in position by tightening screws. Brackets may
also be angled to meet installation requirements.
Roller/fabric assembly installed in case at factory. Brackets supporting roller/fabric
assembly to slide in track inside top of case, allowing viewing surface to be centered in
case regardless of screen size. Roller of 5" or 7" nominal dia. metal. 3-position control
switch to stop or reverse screen at any point. Switch (es) furnished with cover plate.
Please Mark Appropriate Selections
Select Case Color:
White (standard)
Black (optional)
Select Viewing Surface:
Matt White XT1000E(1.0 gain): GREENGUARD Gold certified
Argent White XH1500E (1.5 gain) (Thru 8' x 10')
Contrast Grey XH800E (0.8 gain): GREENGUARD Gold certified
Other___________________________________________________
Select Motor:
110-120V AC (standard)
Control Options:
Please Note: This Draper motorized screen comes with one 110V-120V AC
3-position wall switch (silver wall plate with black rocker)
Total number of 110-120V AC switches (switches operate independently)
Substitute white switch(es) for silver wall plate with black rocker
Optional Low Voltage Control Module (LVC-IV)
Factory install LVC-IV inside case?
Yes
24 Volt 3-Button Switch
Number of 24V switches:
Radio Frequency Remote Control (only with 24v)
Infrared Remote Control (only with 24v)
Optional Key Operated Switch
Power Supply Key Switch (On-off)
3-Position Key Control
3-Position Switch with Hinged Key-Locking Coverplate
Optional Video Interface Control
No
Motorized trap door
opens into the case
Viewing surface to be flame and mildew resistant. Bottom of viewing surface enclosed
in dowel. Matt White XT1000E and Contrast Grey XH800E viewing surfaces are certified to GREENGUARD standards for low chemical emissions into indoor air during
product usage. For more information, visit ul.com/gg. Note: Matt White XT1000E
surfaces up to 10' high will be seamless. 3-position control switch to stop or reverse
screen at any point. Switch(es) furnished with cover plate.
Patented by Draper, Inc. For more information, visit http://www.draperinc.com/
legal/patents/. Entire unit certified by Underwriters' Laboratories, Inc. for the U.S.
and Canada. Plenum rated case (UL approved “Suitable for Use in Environmental
Air Space”).
Downloadable 3-part specifications are available at www.draperinc.com.
Specifications subject to change without notice.
Dimensions & Data
Nominal
Diagonal
Image
Area
16:10 Format
189"
100" x 160"
198"
105" x 168"
222"
117½" x 188"
255"
135" x 216"
278"
147½" x 236"
307"
162½" x 260"
HDTV Format (16:9)
184"
90" x 160"
193"
94½" x 168"
220"
106" x 188"
248"
121½" x 216"
270"
133" x 236"
300"
146" x 260"
NTSC Video Format (4:3)
200"
118" x 158"
210"
126" x 168"
220"
132" x 176"
230"
138" x 184"
240"
141" x 188"
250"
148" x 198"
270"
162" x 216"
24' 7"
177" x 236"
27' 6"
194" x 260"
Size
H xW
Overall
Size
Case
Length 2
Net Wt.
(lbs.)
105" x 164"
110" x 172"
122" x 192"
140" x 220"
152½" x 240"
167½" x 264"
177¾"
185¾"
205¾"
233¼"
257¼"
281¼"
276
286
308
355
402
446
95" x 164"
99½" x 172"
111" x 192"
126½" x 220"
138½" x 240"
151" x 264"
177¾"
185¾"
205¾"
233¼"
257¼"
281¼"
276
281
307
355
402
446
123" x 162"
131" x 172"
137" x 180"
143" x 188"
146" x 192"
153" x 202"
167" x 220"
182" x 240"
198" x 264"
175¾"
185¾"
193¾"
201¾"
205¾"
215¾"
233¾"
257¼"
281¼"
Case
Length 2
276
281
296
301
307
283
305
334
373
Net Wt.
(lbs.)
181¾"
205¾"
205¾"
229¾"
233¼"
253¾"
257¼"
257¼"
281¼"
281¼"
283
295
307
366
427
488
481
412
446
456
Audio Visual Format
14' x 14'
12' x 16'
16' x 16'
Factory install VIC inside case?
Yes
No
VIC-115 Override Switch Override Switch (VICs are compatible only 13' 6" x 18'
18' x 18'
VIC-12 Override Switch not available if with the Override Switch,
8' x 20'
VIC-6 Override Switch VIC is built-in. and not with any other wall
switches or controls)
15' x 20'
Optional Accessories:
Additional set of mounting brackets for alternate mounting
20' x 20'
Extra Drop
11' x 22'
Same color as viewing surface (standard for AV Format)
16' 6" x 22'
Black (standard for other formats)
Custom Size
Length of total drop (including standard 12" on some sizes—see grid at
right) 1
(Total screen height cannot exceed 12')
Black Masking Borders (Optional on AV format, standard on all others)
by
1
These sizes include 12" of Black Drop Standard
2
Includes 1" flange on each end of case. Subtract 1½" for rough ceiling cutout size.
Also available in 1.85:1, 2.35:1 and 15:9 Formats. Contact Draper.
PROJECT:
ARCHITECT:
CONTRACTOR:
SUPPLIER:
Copyright © 2016 Draper Inc. Form UltimateAccessXLE_Sub16 Printed in U.S.A.
DATE:
REVISED:
Qty.
Qty.
Ultimate Access XL
Ultimate Ultimate
Access
XL/Series
E by Draper
Access
XL
123/16”
2”
4 /16”
3
14 /16”
18”
2”
CASE LENGTH
2”
2”
2”
18”
2”
18”
2”
n11/8”
n7/8”
11
18”
2”
43/16”
n11/8”
Page 2 of 2
Case Dimensions and Methods of Installation
CASE LENGTH
12 /16”
3
n5/8”
n7/8”
1411/16”
n5/8”
141/16”
EQUALLY
EQUALLY
SPACED
SPACED
141/16”
EQUALLY
EQUALLY
SPACED
SPACED
12 /16”
3
123/16”
29/16”
29/16”
3 /16”
9¾”
1
9¾”
103/8”
103/8”
11”
31/16”
¾”
¾”
¾”
¾”
Varies
Viewing Surface
Varies
11”
Standard Motor Wiring is on the
AUDIENCE LEFT END of Ultimate Access Case.
21/8"
Viewing Surface
21/8"
For ceiling cutout subtract ½" from case length and width (measured from outer edge of flanges).
ULTIMATE
ACCESS
XL
ULTIMATE
ACCESS
XL
Installation Options1
HOISTING
HOISTING
BRACKET
BRACKET
HOISTING
HOISTING
BRACKET
BRACKET
CASE
CASE
MOUNTING
MOUNTING
BRACKETS
BRACKETS
CASE
CASE
MOUNTING
MOUNTING
BRACKETBRACKET
/8”
7
5
/8 ”
7
Mounting Brackets Dimensions
ULTIMATE
ACCESS XL
Mounting Bracket Dimensions
1
/8"
ELECTRICAL
ELECTRICAL
CUTOUT CUTOUT
1
15/8"
/8"
/2"
R 3/16"
31/8"
1
31/8"
R1/4"
/4"
1
2 7/8"
¾”
TYP.
TYP
1
¾”
With typical installation, brackets may be angled to meet installation requirements.
1
Wiring Diagrams2
TO: MOTOR LEADS
Blue
Location of key
operated on-off
switch if furnished
Black
Blue
Red
To 110-120V Line
www.draperinc.com
(765) 987-7999
Wall Switch
REVISED:
IR Eye Input
DATE:
*A maximum of six (6)
LVC-IV modules can
be linked together.
SUPPLIER:
Low Voltage
Trigger
3-28 VDC
PROJECT:
3 Button Wall Switch
DOWN - Black
COM - White
UP - Red
To 110-120V Line
Receiver
Button
Location of key
operated on-off
switch if furnished
FUSE - 3.15 AMP
250 VAC 5x20mm
Electrically Straight
Data Cable to more
LVC-IV modules*
RS232/485
Inputs/Outputs
For more information and
wiring diagrams for serial and
network communication, please
see wiring diagrams supplied
with individual items.
Single gang box by others
Min. 4" x 2 1/8" x 1 7/8" deep.
3 shown. More or less equally
feasible.
Black
2
Low Voltage, IR Remote, RF Remote, Serial or Network Control (LVC-IV)
Red
External LVC-IV - Single or Multiple
Projection Screen Wiring Diagram
Dashed wiring
by electrician
Black
INTERNAL SCREEN WIRING
Black
White (Common)
Red (Up)
Black (Down)
Blue
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 110V-220V AC-Hot
Black-to 110V-220V AC-Hot
White -Common to screen & 110V-220V AC Neutral
Green/Yellow (Ground)
Red
Green/Yellow
(Motor Ground)
Blue
Single gang box by others
Min. 4" x 2 1/8" x 1 7/8" deep
Dashed wiring by electrician
Low voltage wiring by others
Control
switch
Location of key
operated on-off
switch if furnished.
Cap off with wire
nut and tape
Dashed wiring
by electrician
N
Internal Screen Wiring
White (Common)
Black (Down)
Red (Up)
Green (Ground)
Please Note: For serial (LVC-IV) and network (LVC-IV & LS100)
wiring diagrams, please consult instructions for those modules.
Internal Screen Wiring
White (Common)
Black (Down)
Red (Up)
Green (Ground)
Red
To
110-120 VAC L1
Line
GND
Multiple Station Control
Single Station Control
/4 "
TYP.
TYP
35/8"
1015/16"
12 3/16"
110-120V Motor
/2"
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement