SENSA DMX CONTROLLER KIT SAP code 96261600

SENSA DMX CONTROLLER KIT
SAP code 96261600
Pre-wired DMX Controller kit for DIN rail mounting
Class II
Application
Stand alone DMX Controller kit for the control of LED luminaires, pre-wired and
ready for use.
The Sensa DMX Controller uses the DMX 512 protocol to control LED luminaires.
The Sensa software enables easy programming of lighting scenarios. Once
recorded in the controller, those programmes can be run autonomously without the
need for a laptop.
The Controller kit is supplied with all accessories to be mounted on a DIN rail of a
cabinet; it can be completed with an adaptor port and a DMX splitter.
Design notes
The Sensa DMX Controller kit is supplied complete with the Sensa architectural lighting software CD and USB cable. The
software is compatible with Windows XP/Vista/Seven 32/64-bit / 64Ko memory, 512 DMX channels, 255 scenes
The DMX controller is supplied with 8 pre-defined scenarios; it is therefore possible to deploy lighting scenarios without the use
of a laptop and commissioning effort. Scenario recall is achieved through:
- selection buttons on the controller itself,
- programming of time period thanks to the internal astronomical clock and calendar
- the use of the Sensa DMX adaptor portx8 (Art. No 96261604) and remote triggers (commuter, relays, etc). Space has been
allowed inside the Controller box for the adaptor port.
The use of DMX splitter (Art. No 96261602) between Controller and luminaires is strongly recommended for its preventive
protection (lightning upsurge, etc), in addition to the extension potential it provides.
Product features
1
Stand alone Sensa DMX Controller
2
SENSA DMX POWER SUPPLY (ref. 96261603)
3
Power supply connecting cable
4
DMX connecting cable
5
DMX output connectors
6
* SENSA DMX ADAPTOR PORT x8 (ref. 96261604)
7
* SENSA DMX SPLITTER x4 (ref. 96261602)
8
DIN rail 35mm (not supplied)
Supplied with USB cable and Sensa software (CD ROM)
* optional
Thorn Lighting is constantly developing and improving its products. The right is reserved to change specifications without prior notification or public announcement.
© Thorn Lighting
SENSA DMX CONTROLLER KIT
SAP code 96261600
Pre-wired DMX Controller kit for DIN rail mounting
Class II
Stand alone DMX Controller
1
5V DC power supply input
2
DMX output connector
3
Not used
4
DIN rail bracket
5
+ button (scenario display up)
6
- button (scenario display down)
7
Dimmer button
8
Scenario number display
9
DMX signal display
10 Power supply display
11 USB or autonomous mode display
Technical features
Power supply
110 / 230 V AC - 50 / 60 Hz
Power consumption
12 W
DMX 512 Port
1 output (if no use of splitter)
4 outputs (with use of splitter, optional)
Connections
Screw connectors for cable 2,5 mm²
maxi
Dimensions
250 x 180 x 100 mm
Weight
800 g
Operating
temperature
0 to +40 °C
Atmosphere humidity
20 to 80% without condensation
Default settings
The DMX Controller is supplied with 8 pre-set scenarios. This
allows for the validation of the cabling of the installation, as
well as the implementation of simple and immediate scenarios
without the need for commissioning.
Scenario number
Scenario
1
Black
2
Slow change of colours
3
Red
4
Yellow
5
Green
6
Cyan
7
Blue
8
Magenta
Thorn Lighting is constantly developing and improving its products. The right is reserved to change specifications without prior notification or public announcement.
© Thorn Lighting
SENSA DMX CONTROLLER KIT
SAP code 96261600
Pre-wired DMX Controller kit for DIN rail mounting
Class II
Cabling option 1 : Sensa DMX Controller Kit alone
Cabling option 2 : Sensa DMX Controller Kit with Sensa DMX Adaptor Port x8
Cabling option 3 : Sensa DMX Controller Kit with Sensa DMX Splitterx4
Cabling option 4 : Sensa DMX Controller Box with Sensa DMX Adaptor x8 and Sensa DMX Splitterx4
Thorn Lighting is constantly developing and improving its products. The right is reserved to change specifications without prior notification or public announcement.
© Thorn Lighting
SENSA DMX CONTROLLER KIT
SAP code 96261600
Pre-wired DMX Controller kit for DIN rail mounting
Class II
Installation structure option 1 : DMX Controller alone (optional adaptor port shown)
Installation structure option 2 : DMX Controller with splitter (optional adaptor port shown)
Installation structure option 3 : DMX Controller with splitters in cascade (optional adaptor port shown)
Thorn Lighting is constantly developing and improving its products. The right is reserved to change specifications without prior notification or public announcement.
© Thorn Lighting
SENSA DMX CONTROLLER KIT
SAP code 96261600
Pre-wired DMX Controller kit for DIN rail mounting
Class II
Warnings
•
•
•
•
•
•
•
•
Do not place the SENSA DMX CONTROLLER KIT on instable surfaces
Do not position the SENSA DMX CONTROLLER KIT in places where a risk of walking or tripping on cables may occur
Protect from direct sun exposure, heating devices, rain, humidity, dust, liquids, magnetic fields
Operating temperatures: 0°C to +40°C
Do not use the SENSA DMX CONTROLLER KIT during thunder storm
Do not connect the SENSA DMX CONTROLLER KIT when it is powered
Do not use damaged cables or accessories with the SENSA DMX CONTROLLER KIT
Do not undertake maintenance operations as it may cancel the warranty
Thorn Lighting is constantly developing and improving its products. The right is reserved to change specifications without prior notification or public announcement.
© Thorn Lighting