BIENFANG 550 HEAT PRESS BIENFANG 250 HEAT PRESS HOT

Wholesale Moulding & Picture Framing Supplies
HEAT MOUNTING & LAMINATING EQUIPMENT
BIENFANG 550 HEAT PRESS
Easy to read
digital display
with touch pad.
The BIENFANG Mechanical Heat Presses are versatile, dependable
and will handle an array of sizes. Designed to consistently provide
even heat and uniform pressure- two of the most important
requirements for heat mounting and laminating. Includes
an electronic thermostat controller for precise temperature
control. Capable of handling materials 51” in width and any
length in sections.
CODE
SIZE
550
26” x 34” PLATEN
BIENFANG 250 HEAT PRESS
The Bienfang 210M is designed for professional mounting, laminating, and texturing by framers, professional photographers, artists,
and educators. The 210M offers a wide temperature control range
and a direct temperature readout feature which provides consistent and professional results
CODE
SIZE
250
18.5” x 23” PLATEN
HOT PRESS GLASS TOP HEAT/VACUUM PRESS
The HOT PRESS heat/vacuum presses features a “state-of-theart”heat platen that replaces conventional metal platens. Super
strong tempered glass means non-bowing, non-marring, easy to
clean, and very consistent and uniform heat over the entire platen. Features: Modular Controls - a highly accurate digital readout,
programmable temperature controller and scientific vacuum gauge
to allow for easy operator monitoring of both heat and vacuum
systems.
CODE
SIZE
HGP220
25” x 37” PLATEN
HGP260
35” x 47” PLATEN
HGP360
42.5” x 66.5” PLATEN
HGP560
50.25” x 98.25” PLATEN
STANDS OPTIONAL
DRYTAC 2525 HARDBED PRESS
This rugged hardbed mechanical press features an extra platen
that will handle multiple insertions of work up to 2” thick and 57”
wide by any length.
CODE
SIZE
PR2525
25” x 25” PLATEN
Toll Free: 1-877-769-1617
Prices subject to change without prior notice. JAN./10
SEC
7
PG
1
Wholesale Moulding & Picture Framing Supplies
HEAT MOUNT TISSUE & RELEASE
DRYTAC TRIMOUNT DRY MOUNT TISSUE
MOUNTING & LAMINATE
SUGGESTED APPLICATIONS:
Trimount is suitable for use in all
makes of dry mounting presses.
Trimount is recommended for bonding RC
photographic paper and printed materials to
smooth surfaces. It equals or surpasses all dry
mounting tissues on the market.
TECHNICAL SPECIFICATIONS:
Carrier: Paper/off–white
Adhesive Bond: Permanent
Adhesive Base: Solvent Acrylic
Release Liner: None
Initial Tack: None
Procesing Temperature: 185°F-212°F
(85°C–100°C)
Dwell Time: 30-90 seconds
Trimount™ is a premium quality, multi-purpose 3.0 mil (75 micron) dry
mounting tissue. This permanent, breathable tissue is recommended for
bonding resin-coated photographs, posters and printed materials to most
smooth surface substrates. The pH-neutral heat-activated adhesive will
bond at temperatures as low as 185°F (85°C).
CODE
TR3205
TR3210
TR3215
TR20150
TR25150
TR36150
TR41150
TR42150
TR51150
TR25300
TR36300
TR41300
TR42300
TR51300
SIZE
8” x 10”/100 sheets
special order
11” x 14”/100 sheets special order
16” x 20”/100 sheets special order
20.5” x 150’ roll
25.5” x 150’ roll
36.5” x 150’ roll
41” x 150’ roll
42.5” x 150’ roll
51” x 150’ roll
25.5” x 300’ roll
36.5” x 300’ roll
41” x 300’ roll
42.5” x 300’ roll
51” x 300’ roll
BIENFANG FUSION 4000
Bienfang Fusion 4000 clear, 100% adhesive formulation and specialized
processing creates the cleanest, purest adhesive film available. Fusion
4000 Flows easily and evenly under heat(170°F) and solves the problem
of mounting fabrics and other textured surfaces.
CODE
FUSION-24.5
FUSION-40.5
SIZE
24.5” x 90’ roll
40.5” x 90’ roll
RELEASE PAPER
A double sided, silicone paper for use when dry mounting or laminating
to prevent adhesive from sticking to the press platen.
CODE
RELEASE-26
RELEASE-42
SIZE
26” x 60’ roll
42” x 105’ roll
RELEASE BOARD
SEC
7
PG
2
Same quality as release paper but mounted on board for easy use.
CODE
RELEASE-B32
RELEASE-B40
Prices subject to change without prior notice. JAN./10
SIZE
32” x 40” (5 BOARDS PER PACK)
40” x 60” BOARD
Toll Free: 1-877-769-1617
Wholesale Moulding & Picture Framing Supplies
HEAT SET LAMINATING FILMS
PERFORATED MATT UV LAMINATE
TECHNICAL SPECIFICATIONS:
Finish: Matte
Base Film: 3.0 mil (75 micron) PVC (vinyl
Adhesive: 1.0 mil (25 micron) solvent acrylic
Release Liner: Moisture stable paper
Initial Tack: Low
Application Temperature: 185°F–210°F
(85°C–99°C)
Application Speed: 1’-6’ (0.3m –1.75m) per
minute
ArtShield Matt UV is the film of choice for plaque mounting. Also
recommended for situations where a non-glare finish is required
or specific lighting conditions cannot be controlled. Ideal for
images gallery displays that will be viewed under direct lighting
from many different angles.
CODE
MT25050PP
MT25150PP
MT25300PP
MT41050PP
MT41150PP
MT41300PP
MT51050PP
MT51150PP
MT51300PP
SIZE
25.5” x 50’ roll
GOOD VALUE
25.5” x 150’ roll
BETTER VALUE
25.5” x 300’ roll
BEST VALUE
41.0” x 50’ roll
GOOD VALUE
41.0” x 150’ roll
BETTER VALUE
41.0” x 300’ roll
BEST VALUE
51.0” x 50’ roll
GOOD VALUE
51.0” x 150’ roll
BETTER VALUE
51.0” x 300’ roll
BEST VALUE
FINISH GUARD ULTRA MATTE UV LAMINATE
Bienfang® Finish Guard™ UV Laminating Films shield framing and
mounting projects against the damage that can be caused by ultraviolet rays. The films are coated on one side with a permanent
adhesive that bonds when heated to provide a durable and lightweight alternative to glass.
CODE
UM25050PP
UM41050PP
SIZE
25.5” x 50’ roll
Pre-perforated
41” x 50’ roll
Pre-perforated
PERFORATED MATTEX UV LAMINATE
TECHNICAL SPECIFICATIONS:
Finish: Semi-matte
Base Film: 2.0 mil (50 micron) PVC (vinyl)
Adhesive: 1.0 mil (25 micron) solvent acrylic
Release Liner: Moisture stable paper
Initial Tack: Low
Application Temperature: 185°F–210°F
(85°C–99°C)
Dwell Time: 2-6 minutes
Toll Free: 1-877-769-1617
ArtShield Mattex™ UV laminating film is ideal for laminating canvas mounted photographs. When provided with adequate dwell
time, temperature and pressure, the laminating film will take on
the texture of the canvas for a beautiful textured finish.
CODE
MX25050PP
MX25150PP
MX41050PP
MX41150PP
MX51050PP
MX51150PP
SIZE
25.5” x 50’ roll
GOOD VALUE
25.5” x 150’ roll
BETTER VALUE
41.0” x 50’ roll
GOOD VALUE
41.0” x 150’ roll
BETTER VALUE
51.0” x 50’ roll
GOOD VALUE
51.0” x 150’ roll
BETTER VALUE
Prices subject to change without prior notice. JAN./10
SEC
7
PG
3
Wholesale Moulding & Picture Framing Supplies
HEATSET LAMINATING FILMS
SATINEX UV LAMINATE
This HeatSet™ PVC (vinyl) laminating film has a semi-gloss finish and
provides excellent UV protection.
MOUNTING & LAMINATE
SUGGESTED APPLICATIONS:
ArtShield Satinex™ UV enhances posters, digital
prints and photographs. Popular applications
include laminating fabrics, canvas, and raised
surfaces such as leaves and dried flowers.
SEC
7
PG
4
TECHNICAL SPECIFICATIONS:
Finish: Semi-Gloss
Base Film: 2.0 mil (50 micron) PVC (vinyl)
Adhesive: 1.0 mil (25 micron) solvent acrylic
Release Liner: Moisture stable paper
Initial Tack: Low
Application Temperature: 185°F–210°F
(85°C–99°C)
Dwell Time: 2-6 minutes
SUGGESTED APPLICATIONS:
The textured non-glare finish of ArtShield Linentex UV is ideal for framed portraits, diplomas and
certificates.
TECHNICAL SPECIFICATIONS:
Finish: Embossed linen textured matte
Base Film: 4.0 mil (100 micron) PVC (vinyl)
Adhesive: 1.0 mil (25 micron) solvent acrylic
Release Liner: Moisture stable paper
Initial Tack: Low
Application Temperature: 185°F–210°F
(85°C–99°C)
Dwell Time: 4–10 minutes
TECHNICAL SPECIFICATIONS:
Finish: Embossed Canvas textured matte
Base Film: 4.0 mil (100 micron) PVC (vinyl)
Adhesive: 1.0 mil (25 micron) acrylic
Release Liner: Moisture stable paper
Initial Tack: Low
Application Temperature: 185°F–210°F
(85°C–99°C)
Dwell Time: 4–10 minutes
CODE
SX38164
SX41328
SX51164
SIZE
25.5” x 164’ roll
special order
41.0” x 328’ roll
special order
51.0” x 164’ roll
special order
PERFORATED SATINEX UV LAMINATE
Satinex film, already perforated for you; a true time saver!
CODE
SX25050PP
SX25150PP
SX25300PP
SX41050PP
SX41150PP
SX41300PP
SX51050PP
SX51150PP
SX51300PP
SIZE
25.5” x 50’ roll
GOOD VALUE
25.5” x 150’ roll
BETTER VALUE
25.5” x 300’ roll
BEST VALUE
41.0” x 50’ roll
GOOD VALUE
41.0” x 150’ roll
BETTER VALUE
41.0” x 300’ roll
BEST VALUE
51.0” x 50’ roll
GOOD VALUE
51.0” x 150’ roll
BETTER VALUE
51.0” x 300’ roll
BEST VALUE
PERFORATED LINENTEX UV LAMINATE
ArtShield Linentex™ UV is a PVC (vinyl), HeatSet™ laminating film with
an embossed linen-like finish.
CODE
LX25050PP
LX51050PP
SIZE
25.5” x 50’ roll
special order
51.0” x 50’ roll
special order
PERFORATED CANVASTEX UV LAMINATE
ArtShield Canvastex™ UV is a PVC (vinyl), HeatSet™ laminating film with
an embossed canvas-like finish.
CODE
CT25050PP
CT51050PP
SIZE
25.5” x 50’ roll
special order
51.0” x 50’ roll
special order
OTHER DRYTAC PRODUCTS AVAILABLE UPON SPECIAL REQUEST.
Prices subject to change without prior notice. JAN./10
Toll Free: 1-877-769-1617
Wholesale Moulding & Picture Framing Supplies
HEAT MOUNT ACCESSORIES
BIENFANG TACKING IRON
Bienfang® Tacking Irons are designed to tack materials into position to
prevent shifting before processing; one has a preset, self-regulating temperature control and the other an adjustable control.
CODE
TACK1
TACK2
SIZE
BIENFANG TACKING IRON
BIENFANG ADJUSTABLE TACKING IRON FOAM OVERLAY BLANKET
A high density heat resistant foam used as a cover when laminating to
allow air to escape.
CODE
FO7035
FO7040
FO7055
SIZE
28” x 54” x 1/2”
54”x 56” x 1/2”
56” x 108” x 1/2”
FOAM OVERLAY BLANKET
For smooth, even laminations,, a sponge foam overlay is required.
CODE
FO1309
DESCRIPTION
42” x 8.5’ x 1/4”
ADHESIVE-COATED CANVAS
TECHNICAL SPECIFICATIONS:
Adhesive: Clear HeatSet™
Release Liner: Moisture stable paper
Activation Temperature: 185°F–210°F
(85°C–99°C)
Press Compatibility: All mechanical,
hardbed and heated vacuum presses.
Drytac Adhesive-Coated Canvas is a premium line of quality 12oz. natural
beige coarse canvas coated with a clear HeatSet™ adhesive and protected by a moisture stable release liner. It replicates a fine “oil portraiture”
look, and its low tack/non-slip surface makes working with this canvas
extremely easy. Super White Adhesive-Coated Canvas restores the white
base of prints and photographs.
CODE
IRB51033
SIZE
50.5” x 33’ roll
SELECT PRE-COATED CANVAS
This medium textured canvas is coated with a white, heat-activated
adhesive (no release liner) that has no initial tack and is therefor self
wound. Recommended activation is 185°F–210°F (85°C–99°C).
CODE
MC6008
SIZE
60” x 18’ roll
SEC
7
PG
5
Toll Free: 1-877-769-1617
Prices subject to change without prior notice. JAN./10
Wholesale Moulding & Picture Framing Supplies
COLD MOUNT LAMINATOR
Jet Mounter JM26 Cold-Mount Laminator
Standard Features:
• variable speed-electric drive
• silicone rollers
• all-steel construction
• forward and reverse
• supply shaft included
• foot pedal controls
• photo electric safety stop
MOUNTING & LAMINATE
CODE
JM26
SEC
7
PG
6
Specifications:
• Max Laminating Width: 26.25 in.
• Width: 33.25 in.
• Depth: 12.2 in.
• Height: 12.28 in.
• Weight: 53 lbs.
• Roller Diameter: 2.5 in.
• Max Nip Opening: .375 in.
• Power: 115 VAC 50/60 Hz
SIZE
DRYTAC JM26” LAMINATOR
Jet Mounter JM44 Cold-Mount Laminator
Standard Features:
• variable speed-electric drive
• silicone rollers all-steel construction
• forward and reverse
• supply shaft included
• foot pedal controls
• photo electric safety stop
• optional stand extra
CODE
JM44
Specifications:
• Max Laminating Width: 44.25 in.
• Width: 52.75 in.
• Depth: 17.75 in.
• Height: 18 in.
• Weight: 243 lbs.
• Roller Diameter: 4 in.
• Max Nip Opening: 1 in.
• Power: 115 VAC 50/60 Hz
SIZE
DRYTAC JM44” LAMINATOR
Jet Mounter ML25 Manual Laminator
The ML 25 is a manual laminator capable of mounting and laminating graphics up to 25” wide. It is compatible with pressure-sensitive
(cold) mounting adhesives and films. This innovative machine features
changeable nip opening and easy roller pressure controls. The ML 25 is
an excellent tool for teaching the basics of professional finishing with
pressure-sensitive materials, and will deliver quality results when used
according to instructions.
• Max Laminating Width: 25.5 in.
• Width: 27.375 in.
• Depth: 24.5 in.
• Height: 10.25 in.
• Weight: 32 lbs.
• Roller Diameter: 2.5 in.
• Max Nip Opening: .375 in.
CODE
ML25
Prices subject to change without prior notice. JAN./10
SIZE
DRYTAC ML25” LAMINATOR
Toll Free: 1-877-769-1617
Wholesale Moulding & Picture Framing Supplies
PRESSURE-SENSITIVE (COLD) MOUNT ADHESIVE
3M POSITIONABLE ADHESIVE
3M Positionable Adhesive is a strong, long lasting pure adhesive with a single release liner. Ideal for
mounting photographs to most substrates. A great method of mounting photos into wedding albums
as it can be hand applied. Easy to apply and reposition until pressure is applied.
Code#
PSA56824
Roll Size
24” x 50’
Square Foot per
100 sq. ft.
DRYTAC SURETAC ADHESIVE
SureTac is an aggressive acrylic adhesive coated on both sides of a 1.0 mil polyester carrier with
a high quality, moisture stable release liner. SureTac adhesive is a versatile adhesive, compatible
with a wide variety of media and substrates.
Code#
PSA28255
Roll Size
25.5” x 150’
Square Foot per
318.7 sq. ft.
DRYTAC MEDIATAC ADHESIVE
MediaTac is a smooth coating of Drytac’s acrylic adhesive on both sides of a 0.5 mil polyester film
carrier. This econmical adhesive is backed by a moisture stable release liner.
Code#
PSA2632328
Roll Size
32.5” x 328’
Square Foot per
888.3 sq. ft.
PRESSURE-SENSITIVE (COLD) LAMINATES
DRYTAC SHEENTEX 4.2 mil UV LAMINATE
Protac SheenTex™ is a textured satin vinyl overlaminating film coated with a solvent acrylic adhesive. SUGGESTED APPLICATIONS: Excellent for laminating mounted prints that will be placed in
high-traffic indoor display areas including trade show and exhibit applications. It is also suitable
for laminating mouse pads, counter graphics and other similar applications.
Code#
Roll Size
Square Foot per
PSL-SHT25
25.5” x 164’
348.5 sq. ft.
DRYTAC LUSTRE 4.2 mil UV LAMINATE
A clear luster PVC (vinyl) film coated with an aggressive solvent acrylic adhesive supported by a
high quality paper release liner. Low sheen without loss of contrast or sharpness makes 4.2 mil
Protac Lustre™ UV particularly desirable.
Code#
PS-LU25
Roll Size
25.5” x 164’
Toll Free: 1-877-769-1617
Square Foot per
348.5 sq. ft.
Prices subject to change without prior notice. JAN./10
SEC
7
PG
7
Wholesale Moulding & Picture Framing Supplies
PRESSURE-SENSITIVE (COLD) LAMINATES
DRYTAC EMERYTEX 5.0 mil UV LAMINATE
A non-glare 5 mil PVC laminate with high tack acrylic adhesive that deters tunneling. This scuff
resistant laminating film has a pebble finish with built in UV inhibitors.
Code#
PSL25164
Roll Size
25.5” x 164’
Square Foot per
348.5 sq. ft.
MOUNTING & LAMINATE
DRYTAC ANTIQUE LEATHER 4.0 mil UV LAMINATE
Protac Antique Leather UV is a soft PVC film with an antique leather finish, suitable for framing all
sorts of flat artwork. SUGGESTED APPLICATIONS: Protac Antique Leather UV is suitable for use with
portrait photographs, certificates, diplomas and fine art inkjet prints.
Code#
PSL-AL25
Roll Size
25.5” x 82’
Square Foot per
174.25 sq. ft.
DRYTAC STEEL 4.0 mil UV LAMINATE
Unlike anything you’ve seen before, Protac Steel UV simulates brushed metal over artwork. A
heavy-texture film, this special finish resembles hessian or canvas. The rough, embossed surface is
capable of hiding large imperfections in prints and posters.
Code#
Roll Size
PSL-STEEL25 25.5” x 82’
Square Foot per
174.25 sq. ft.
DRYTAC HIGH GLOSS 5.0 mil UV LAMNIATE
This is a premium high-gloss, polyester laminating film that enhances both color and contrast.
Protac™ High Gloss UV is coated with an aggressive solvent acrylic adhesive and is backed by a high
quality clear polyester release liner. SUGGESTED APPLICATIONS:Protac High Gloss UV adds depth
and detail to any image, whether it is photographic, inkjet, electrostatic or other output media.
Protac High Gloss UV is also the recommended film for photo competition prints, POP graphics, or
anywhere a high-gloss, almost mirror-like finish is desired.
Code#
PSL-HG25
Roll Size
Square Foot per
25.5” x 150’ 318.75 sq. ft.
SEC
7
PG
8
Prices subject to change without prior notice. JAN./10
Toll Free: 1-877-769-1617