Commercial DHW Modular Manifold Mounting Systems

Ready-Link
Manifold System
for NPE Series
®
The Leader in Condensing Technology
Commercial DHW Modular
Manifold Mounting Systems
•Simply no waiting for factory racks
•Simply easy to install...same day
•Simply more profitable
•Simply visit your local Navien wholesaler
and pick up everything you need
T H E
L E A D E R
I N
C O N D E N S I N G
T E C H N O L O G Y
Navien Ready-Link manifold systems
®
Now manifold mounting on a wall
or rack is as simple as 1-2-3-4
1
2
3
4
Pick your
Navien
unit, NPE-A
or NPE-S
Pick your
location,
wall
or rack
Pick your
matching
manifold
kit(s)
Pick your
intake/exhaust
venting
configuration
NPE series condensing tankless water heaters
NPE-Advanced
NPE-Standard
Simple same
day assembly
No waiting for expensive bulky factory
assembled racks. Everything is available
at your local Navien wholesaler with an
easy to follow installation manual.
Simple to transport
Every component of the system is
portable for easy pickup and setup. All
parts of the kit fit through a standard
door opening.
Cascade up
to 16 units
Simple to expand
Dual stainless steel
heat exchanger
Ready-Link wall or rack manifold kits can
be built in 30 configurations from 2–16
units. Common venting up to 8 units.
Cascading up to 16 units.
®
ComfortFlow
recirculating system
with built-in buffer
tank and pump
Simple way to make
more money
You handle the installation yourself, on
your terms and time frame.
NG or LP field
gas convertible
Manifold kit components
Each kit includes the
following
items in
Optional
accesssories
varying quantities
based on the kit selected:
•3/4" x 3/4" Adapter
•3/4" NPT Ball Valve
•1-1/2" Gas Union
Neutralizer, Light Commercial, up to 6 Units
GXXX001324
•2" Copper End Cap
•2" Copper Coupling
Common Vent
•2-1/8" StrutCollar
Clamp
Kit
30014367A
•Hardware Kit
•3/4" Service Valves with PRV
•1-5/8" x 18" Strut Channel (14ga)
•3/4" x 24" SS Corrugated Flex Connector
•3/4" x 30" Gas Flex Connector
•3/4" x 18" SS Corrugated Flex Connector
Ready-Link Rack
Base Component
GFFM-KDIZUS-001
®
•1-1/2" FPTReady-Link
GalvanizedCommunication
Iron End CapCable
®
GXXX000546
•1-7/8" OD Strut Clamp
Ready-Link
Add-on Component
GFFM-KDIZUS-002
®
Neutralizer, Commercial, up to 16 Units
GXXX001325
The Leader in Condensing Technology
T H E
L E A D E R
I N
C O N D E N S I N G
T E C H N O L O G Y
Navien Ready-Link manifold systems
Wall mount
Side-by-side kits
®
Now manifold mounting on a wall
or rack is as simple as 1-2-3-4
1
2
3
4
Pick your
Navien
unit, NPE-A
or NPE-S
Pick your
location,
wall
or rack
Pick your
matching
manifold
kit(s)
Pick your
intake/exhaust
venting
configuration
Simple same
day assembly
No waiting for expensive bulky factory
assembled racks. Everything is available
at your local Navien wholesaler with an
easy to follow installation manual.
Simple to transport
Every component of the system is
portable for easy pickup and setup. All
parts of the kit fit through a standard
door opening.
Simple to expand
Ready-Link wall or rack manifold kits can
be built in 30 configurations from 2–16
units. Common venting up to 8 units.
Cascading up to 16 units.
®
2 side-by-side
30019040A
3 side-by-side
30019041A
4 side-by-side
30019043A
Rack mount
Side-by-side kits
Simple way to make
more money
You handle the installation yourself, on
your terms and time frame.
Manifold kit components
2 side-by-side
30019040A
Each kit includes the
following items in
varying quantities
based on the kit selected:
3 side-by-side
30019041A
4 side-by-side
30019043A
Rack mount
Back-to-back kits
•3/4" x 3/4" Adapter
•3/4" NPT Ball Valve
•1-1/2" Gas Union
•2" Copper End Cap
•2" Copper Coupling
•2-1/8" Strut Clamp
•Hardware Kit
•3/4" Service Valves with PRV
•1-5/8" x 18" Strut Channel (14ga)
2 back-to-back
30019039A
•3/4" x 24" SS Corrugated Flex Connector
4 back-to-back
30019042A
•3/4" x 30" Gas Flex Connector
•3/4" x 18" SS Corrugated Flex Connector
•1-1/2" FPT Galvanized Iron End Cap
•1-7/8" OD Strut Clamp
Ready-Link Rack Base and Add-on Components sold separately.
®
The Leader in Condensing Technology
T H E
L E A D E R
I N
C O N D E N S I N G
T E C H N O L O G Y
Navien Ready-Link manifold mounting system configurations
®
2 Unit
Side-by-Side
Manifold
4 and 3 Unit
Side-by-Side
Manifold
2
2 Unit
Back-to-Back
Manifold
7
3 and 3 Unit Side-by-Side
Manifold (bank 1) +
3 and 3 Unit
Side-by-Side
Manifold (bank 2)
12
7
4 and 2 Unit Back-to-Back
Manifold (bank 1) +
4 and 2 Unit
Back-to-Back
Manifold (bank 2)
12
8
4 and 4 Unit Side-by-Side
Manifold (bank 1) +
3 and 2 Unit
Side-by-Side
Manifold (bank 2)
13
8
4 and 4 Unit Back-to-Back
Manifold (bank 1) +
4 and 2 Unit
Back-to-Back
Manifold (bank 2)
13
9
4 and 3 Unit Side-by-Side
Manifold (bank 1) +
4 and 3 Unit
Side-by-Side
Manifold (bank 2)
14
9
4 and 4 Unit Back-to-Back
Manifold (bank 1) +
4 and 2 Unit
Back-to-Back
Manifold (bank 2)
14
10
4 and 4 Unit Side-by-Side
Manifold (bank 1) +
4 and 3 Unit
Side-by-Side
Manifold (bank 2)
15
10
4 and 4 Unit Back-to-Back
Manifold (bank 1) +
4 and 4 Unit
Back-to-Back
Manifold (bank 2)
15
11
4 and 4 Unit Side-by-Side
Manifold (bank 1) +
4 and 4 Unit
Side-by-Side
Manifold (bank 2)
16
11
4 and 4 Unit Back-to-Back
Manifold (bank 1) +
4 and 4 Unit
Back-to-Back
Manifold (bank 2)
16
4 and 4 Unit
Back-to-Back
Manifold
2
3 Unit
Side-by-Side
Manifold
4 and 4 Unit
Side-by-Side
Manifold
3
4 Unit
Back-to-Back
Manifold
4 and 4 Unit
Back-to-Back
Manifold
3
4 Unit
Side-by-Side
Manifold
4
3 and 2 Unit Side-by-Side
Manifold (bank 1) +
4 Unit
Side-by-Side
Manifold (bank 2)
4
4 and 2 Unit Back-to-Back
Manifold (bank 1) +
3 Unit
Side-by-Side
Manifold (bank 2)
5
3 and 2 Unit Side-by-Side
Manifold (bank 1) +
3 and 2 Unit
Side-by-Side
Manifold (bank 2)
5
4 and 4 Unit Back-to-Back
Manifold (bank 1) +
2 Unit
Back-to-Back
Manifold (bank 2)
6
4 and 3 Unit Side-by-Side
Manifold (bank 1)
+ 4 Unit
Side-by-Side
Manifold (bank 2)
6
4 and 4 unit Back-to-Back
Manifold (bank 1) +
4 Unit
Back-to-Back
Manifold (bank 2)
4 Unit
Back-to-Back
Manifold
3 and 2 Unit
Side-by-Side
Manifold
4 and 2 Unit
Back-to-Back
Manifold
4 and 2 Unit
Side-by-Side
Manifold
4 and 2 Unit
Back-to-Back
Manifold
NOTE: When adding additional manifolds, field adjustment of the main piping may be
necessary in order to properly connect the provided flex connectors to the water heaters.
Other configurations are possible. Rack not required for wall mount.
Ready-Link Rack Base and Add-on Components sold separately.
®
Navien Inc.
20 Goodyear, Irvine, CA 92618
800-519-8794, Navien.com
NPE-BR005-1709
©2017 Navien Inc.
The Leader in Condensing Technology
T H E
L E A D E R
I N
C O N D E N S I N G
T E C H N O L O G Y
Download PDF