Hitag 1/2/S Proximity Reader - Integrated Security Solutions

Hitag 1/2/S
Hitag 125kHz technology with or
without keypad
Product Features
Technical Data
Cable Connections
Reader supplied with 2 metre (6.5ft) - 6 core screened cable
+12VDC Supply
0VDC Ground
Data 0
Data 1
Cable Distance / Gauge
Maximum of 100 metres—24AWG (7/0.20)
ABS plastic UV resistant
Reader Supply Voltage
LED and Buzzer Control Inputs
0 to +5VDC maximum
Operating Temperature
–25°C to +85°C
Current Consumption
35mA at +12VDC
IP Rating
IP68-excluding buzzer
119 x 40 x 17mm (4.69 x 1.57 x 0.67”)
Fixing Kit
Security screws, rawl plugs, installation screws and
screwdriver bit included
Colours Available
GG—Graphite Grey
Other colours available upon request—subject to minimum
order quantities.
Output Types - programmable with configuration cards
Wiegand 50 bit—shipped as standard
Wiegand 26 bit
Wiegand 30 bit
LED control
Magstripe 16 bit characters
Magstripe 32 bit characters
Repeat Read
Part Numbers
105-288-CC AX Hitag 125kHz proximity reader
105-289-CC AX Hitag 125kHz proximity & keypad reader
AX Hitag 125kHz proximity module only
AX Enrolment Reader Hitag 1 /2 / S
CC signifies reader colour & X signifies output type
The Hitag proximity reader combines the userfriendliness of proximity reading, in an attractive
slim design housing.
With a typical reading range of 10cm, it allows
fast reading of Hitag 1, 2 and S cards and key fobs
providing the unique 32 bit serial number of the
card in standard Wiegand format. The Hitag
reader is also available to read sectors of card
data subject to end-user requirements—please contact
us for additional information.
The Hitag proximity range offers high reliability,
consistent read range and low power
consumption in a single easy to install
weatherised housing. The readers also have the
advantage of audio-visual indication—when the
Hitag card or key fob is presented to the reader,
the tri-colour LED’s indicate whether the card has
been read.
The Hitag range of readers are available as
proximity reader only, proximity and keypad–
combining proximity technology with a fully integrated
keypad or proximity reader module only for integration
into third party equipment or housings.
Both the Hitag reader and reader with keypad are
sealed for indoor or outdoor use. The keypad
reader incorporates tactile keys providing audio
and visual feedback and luminous keys for nighttime operation.
* excludes proximity module only
Warranty Period
The equipment is guaranteed against defects in materials and
workmanship for 2 years from date of shipment (see warranty policy
for details).
Please see other documentation for a range of Hitag cards
and keyfobs to use with these readers.
27-28 Shrivenham Hundred Business Park, Watchfield, Swindon,
Wiltshire SN6 8TZ United Kingdom
+44 (0)1793 784002
+44 (0)1793 784005
Email: info@axxessid.com
Website: www.axxessid.com
July 2010 1
Reads Hitag 1 / 2 / S card serial number
Mullion-style slimline reader
Red, green orange and blue LED’s
Built-in buzzer
Low power consumption
Reading range 10cm (4”)
Weather-proof, fully encapsulated*
2 metres of cable
Wiegand interface as standard with various other
formats available—using configuration cards
Automatic changeover to two-way communication
when connected to AX controllers
Reads many existing access control cards like Paxton