Cloud40 Chromebook Cart
™
™
Technical Specifications
55470
Power side
Device side
Use the Cloud40 cart to store, transport, and charge up to 40 of the largest devices. The cart’s compact footprint (30.75” x
26”) allows easy movement between rooms and saves valuable space. A current-sensing timer provides adaptive switching,
preventing electrical overload in underpowered classrooms, and will handle the next generation of devices with high wattage
charge adapters. Padded shelves and flexible dividers protect the devices. Overhead wire management aids the wiring integration and allows the charging plugs to hang in front of each device. The cart’s compact footprint and handle provide easy mobility. The Cloud40 Cart is made with heavy-gauge steel for security and powder-coated for a durable, long-lasting finish. A dualbolt lock with hasp on the doors increase security of the devices.
Features and Benefits
•
•
•
•
•
•
•
•
•
Stores, charges, and transports up to 40 of the largest devices (up to 14”)
1.25”W x 15.3”D x 12.3438”H storage bay
Small cart footprint (30.75”W x 26”D) saves valuable space
Durable ABS plastic dividers protect devices from scratching (dividers
are removable to provide storage space for thicker devices)
Dual doors provide easy access while reducing space necessary for
swing radius
Double bolt keyed locks and heavy-gauge steel doors provide security
Hasp locks provide an additional level of security and the ability to use
your padlocks of choice
(not included), or secure the unit to a wall
Devices and students are separated from all line voltage
Superior, all-metal overhead cord management system keeps charge cords
organized above each storage bay
• Intuitive PowerProdigy™ charging system senses current from up to
four, 10-outlet power units and distributes power (up to 10A) to the
least-charged devices first (where charging is needed most)
*For most power adapters up to 135W
• Four adjustable, 10-outlet, (125V~/12A, 60Hz) universal power units work
with both inline, and wall adapters
• External power switch provides easy-access for safe power connection
/ disconnection
• 2 auxiliary outlets (always on) for teacher laptop, Wi-Fi access point, or other
accessory (1 external, 1 internal)
• Large, removable QuickBrick™ wiring trays with retaining straps for charge
adapters allow wiring to be completed outside the cart at the comfort of a
workstation or desk to provide quick and easy integration
• Ventilated doors and side panels keep devices and chargers cool,
preventing overheating, and extending device life
• Replaceable, IEC quick-release, 8’ nominal 14 AWG, 3-wire power cord
and external cord wrap brackets provide easy power access
revised 7/13/17
• Four inboard locking casters provide easy rolling, and quiet transport
(5” balloon wheel, 4” balloon wheel options available)
• One all steel handle provides control and maneuverability
• Worksurface and base panel vinyl edging protects walls and furniture
• Cart ships fully-assembled with handle for quick, simple integration
and deployment
• Durable powder coated steel chassis provides a long-lasting finish
• Scratch and impact-resistant high-pressure laminate top provides a
durable, useful worksurface for instructors
• ETL recognized (certified to UL 60950-1) in the US and Canada for the
cart and electrical system
• Warranted to be free of all defects in materials and workmanship for
10 years, electrical system 2 years
• Designed and assembled in Chippewa Falls, WI, USA
Note: This cart is designed to hold up to 40 devices.
55470-AAD - with 4” Balloon Wheels, PowerProdigy™ timer
55470-ABD - with 5” Balloon Wheels, PowerProdigy™ timer
Color Options
Laminate:
White Fiesta
Metal:
Warm Gray
Page 1 of 11
Construction
• The worksurface and base panel is constructed from 1” NAF (No Added Formaldehyde) composite board with
.030” high-pressure laminate on one face, and a balancing phenolic backer on the opposing face
• Worksurface and base panel edges are covered with 3mm vinyl edge band
• 16-gauge side panels, shelves, and doors
• All metal components are finished with a scratch-resistant powder coat epoxy
• This cart is factory-assembled, packaged, and shipped on its own skid
Specifications
Capacity
40 devices
Storage bays (nominal)
1.25”W [3.18 cm] x 15.3”D [38.89 cm] x 12.3438”H [31.36 cm]
Electrical
• (4) 10-outlet power units (outlets rotated 90°)
• 125V~/12A, 60Hz
• 15-amp breaker
• Locking power-side door isolates and separates
electrical line voltage from students
• ETL recognized (certified to 60950-1)
PowerProdigy™ Timer
•
•
•
•
• Cycling interval 15 min
• Four LED lights indicate charging activity status of
each power unit
• Two auxiliary outlets (1 external, 1 internal) 1A each
(controlled by main on/off switch)
• IEC quick-release (replaceable) 8’ nominal,
14 AWG, 3-wire power cord
• ETL recognized (certified to 60950-1)
Low-profile, 16-gauge steel enclosure
125V~/12A, 60Hz
Externally-accessible 15A on/off switch
Smart charging senses current and distributes
power to the power units requiring it most
• Four timed power unit-dedicated outlets
(labeled A, B, C, D) controlled by logic board
(up to 10A power output)
Note: The customer should be aware of the amp draw of the devices used with this cart-especially
when maxing out the storage and charging capacity. Exceeding 15 amps will trip the circuit breaker.
Please consult the owners manual of your specific device for power consumption information.
Wheels
Certifications / Compliance
5” Balloon Wheels - Weight capacity 300 lb [136 kg] each
4” Balloon Wheels (total locking) - Weight capacity 250 lb [114 kg] each
• ETL recognized
• SCS Indoor Advantage Certified
Unit weight (nominal)
208 lb [94.4 kg]
Shipping weight (nominal)
240 lb [108.9 kg]
• Meets or exceeds applicable ANSI-BIFMA test
standards
Specifications subject to change without notice
D
H
W
Double-bolt lock with padlock
hasp (on both doors)
(padlocks not included)
Devices must be placed in the bays with the charge
plug on one of the two exposed edges shown.
revised 7/13/17
Page 2 of 11
Caster Options
ORDER CODE A = 4” Balloon Wheel
revised 7/13/17
ORDER CODE B = 5” Balloon Wheel
Page 3 of 11
External power
switch, LED
indicators, and
AUX outlet
revised 7/13/17
Cloud40 Chromebook Cart
(shown with 5” balloon wheels)
Page 4 of 11
Section view A-A
(shown with common Chromebook models)
Power side
Device side
Inline adapter
and cord storage
Horizontal
QuickBrick™
removable tray
Wall
adapter
10-outlet power units
Vertical
Inline adapter
and cord storage
QuickBrick™
removable tray
Wall
adapter
10-outlet
power units
revised 7/13/17
Page 5 of 11
Device side view wiring diagram
(shown without door)
1.332
[3.39 cm]
Overhead cord
management
Overhead cord
management
revised 7/13/17
Page 6 of 11
Power side wiring diagram
(shown without door)
8’ nominal 14 AWG,
3-wire IEC power cord
(to wall outlet)
39” nominal 14 AWG, 3-wire
IEC power cord on each
upper power unit
(to PowerProdigy™ timer)
To PowerProdigy™ timer
QuickBrick™ removable tray
QuickBrick™ removable tray
Cord wrap
2.098 [5.33 cm]
10-outlet power unit
10-outlet power unit
5.536 [14 cm]
Cord wrap
QuickBrick™ removable tray
QuickBrick™ removable tray
10-outlet power unit
2.098 [5.33 cm]
10-outlet power unit
59” nominal 14 AWG, 3-wire
IEC power cord on each
lower power unit
(to PowerProdigy™ timer)
Note: Each 10-outlet power unit is designed with 3.5” of horizontal adjustability to provide outlet stagger if necessary. This helps accommodate a
wide variety of wall adapter plug sizes and configurations.
Each power unit can also be relocated to a higher vertical position using secondary sets of keyhole slots. This can be done to accommodate extra large
wall adapters. The QuickBrick™ trays have to be removed in this configuration.
revised 7/13/17
Page 7 of 11
PowerProdigy™ Timer
n
ter
Ex
D
LE
t
utle
o
UX
A
e
id
al s
al
ern
Int
e
sid
C
A
ts
utle
O
*On the Cloud40, the PowerProdigy™ Timer can be used with most
power adapters up to 135W.
• Smart charging senses current
• Four green LED lights indicate
and distributes power to the
charging activity status of each
power units requiring it most
power unit
• Four timed power unit-dedicated • Two auxiliary outlets (1 external,
outlets (labeled A, B, C, D)
1 internal)
controlled by logic board
• ETL recognized (certified to 60950-1)
ts
ligh
D
B
rs
we
Po
ch
wit
X
AU t
le
t
C
u
IE O
t
Inle
Input:
Breaker:
Cycling interval:
Cycling outlets:
Auxiliary outlets:
Power Cord:
Power switch:
125V~/12A, 60Hz
15A, 250 VAC
15 minutes
4 timed (A, B, C, D) up to 10A
1A each (controlled by main power switch)
IEC quick-release (replaceable)
8’ nominal, 14 AWG, 3-wire
15A (externally accessible)
*Total maximum wattage will be affected by actual charge adapter
wattage and number of charge adapters per cart.
Power unit adjustability
3.5”
[8.89 cm]
Note: Each 10-outlet power unit is designed with 3.5” of horizontal adjustability to provide outlet stagger
if necessary. This helps accommodate a wide variety of wall adapter plug sizes and configurations.
3.5”
[8.89 cm]
Nominal outlet spacing on
each 10-outlet power unit
Upper
power
unit
Lower
power
unit
(See p.7 for spacing above and below outlets)
revised 7/13/17
Page 8 of 11
Power unit vertical adjustability
(shown without door)
Note: Four sets of keyhole slots provide the ability
to vertically relocate each 10-outlet power unit. This
can be done to provide clearance for extra large wall
adapters. Loosening two screws on each power unit
allows easy adjustment. The QuickBrick™ trays are not
needed and have to be removed in this configuration.
Keyhole slots
Factory-installed position
revised 7/13/17
Typical spaced positions
for large wall adapters
Page 9 of 11
Note: Cart includes four QuickBrick™ removable trays
with a hook and loop retaining strap for charge adapters
to provide fast and easy wiring for quick deployment.
For devices with wall adapters, the QuickBrick™ removable trays can be used to store bundled cords.
QuickBrick™ removable tray
loaded with inline adapters in
vertical position
QuickBrick™ removable tray
loaded with inline adapters in
horizontal position
Accessories
A
.3125” [7.9 mm]
B
1” [25.4 mm]
C
.983” [25 mm]
D
2.07” [52.5 mm]
E
.987” [25.1 mm]
Reprogrammable 4-digit Combination Lock - 95536
•
•
•
•
•
Set your own 4-digit personalized combination (up to 10,000 options)
5/16” hardened steel shackle for cut-resistance
Black powdercoated die-cast body for durability
Change key included
Unit weight: .55 lb [.25 kg]
revised 7/13/17
Hook-and-loop Strap Kit - 95004
Slot labels for Cloud40 - 55475
(16) .75” [1.91 cm] x 12” [30.48 cm],
and (32) .75” [1.91 cm] x 5” [12.7 cm]
• Black numbers on transparent
adhesive backer
See spectrumfurniture.com for the latest
accessories and detailed warranty information.
Page 10 of 11
Warranty
WE WILL MAKE IT RIGHT FOR YOU!
Spectrum is committed to provide complete customer satisfaction. Each of our products is manufactured from the best materials available and each
product is stringently monitored throughout the production process through our P.A.C.E. program (Product Assurance to meet Customer Expectations).
We expressly warrant that Spectrum products will be of good quality and workmanship and free from defect for the period set out in the warranty table below
from the date of delivery. This warranty shall not apply to defects or damage resulting from misuse, abuse, neglect, improper care, modification or repair not
authorized by Spectrum, or any other cause outside the control of Spectrum. Spectrum will, at its sole option, either repair or replace the defective product.
This warranty is exclusive; no other warranty, written or oral, is expressed or implied. This warranty is given by Spectrum to Buyer and to no other person or legal entity. No Spectrum dealer, distributor, agent or employee is authorized to make any modification or addition to this warranty.
NOTWITHSTANDING ANYTHING TO THE CONTRARY, SPECTRUM WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR INDIRECT OR LIQUIDATED DAMAGES, INCLUDING CONSEQUENTIAL, INCIDENTAL AND SPECIAL DAMAGES. IN NO EVENT SHALL SPECTRUM’S LIABILITY, WHETHER
UNDER CONTRACT OR WARRANTY, IN TORT OR OTHERWISE, EXCEED THE PURCHASE PRICE RECEIVED BY SPECTRUM FOR THE PRODUCT AT
ISSUE AND “RECALL ACTION” EXPENSES. SPECTRUM SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES, WHETHER ARISING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORIES OF LAW, WITH
RESPECT TO PRODUCTS SOLD OR SERVICES RENDERED BY SPECTRUM, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATING THERETO.
Our Customer Service Department is ready to provide immediate attention to any questions, comments or concerns. They are available to answer your calls
Monday through Friday from 7 am to 5 pm CST. In addition your product comments or concerns are welcome via e-mail at: spectrum@spectrumfurniture.com.
Warranty Table
Item
Adjustable Crank / Electric Desk Legs
Flat Panel Desk Gas Cylinders
Chairs
• Adjustable Height Chair Parts – including frames, gas
cylinders, wood and plastic parts, control handles, casters
• Adjustable Height Chair Upholstery
• In-Stock Upholstery
• Graded-In Fabrics and Customer Owned Material
Height Adjustable Columns and Lifts
General Use Casters
Warranty Period
effective 1/1/2015
• 1 Year
• 7 Years
• 2 Years
• 2 Years
• No Warranty
• 1 Year
Electrical (including timers and LINAK actuators)
• 2 Years
Keyboard / Mouse Trays
• 1 Year
Flat Panel Monitor Arms
• Flat Panel Monitor Arm – General Parts
• Flat Panel Monitor Arm – Gas Cylinders
• 5 Years
• 2 Years
Desks and Lecterns
• Computer Desk Chassis
• Cart Chassis
• Lectern Chassis
• 10 Years
DESIGNED AND ASSEMBLED IN
CHIPPEWA FALLS
WISCONSIN.USA
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
revised 7/13/17
© 2017 Spectrum Industries Inc., All rights reserved.
Page 11 of 11
Download PDF