2017 Chrysler Pacifica Uconnect 8.4/8.4NAV Radio Book

UCONNECT 8.4/8.4 NAV
OWNER’S MANUAL
SUPPLEMENT
17UC84A-526-AC
Third Edition
Uconnect 8.4/8.4 NAV
Printed in the USA
©2016 FCA US LLC. All Rights Reserved.
Chrysler, Dodge, Jeep, Ram, Mopar and Uconnect are trademarks of FCA US LLC.
FIAT is a registered trademark of FCA Group Marketing S.p.A.,
used under license by FCA US LLC.
SECTION
TABLE OF CONTENTS
PAGE
1
SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1
2
IDENTIFYING YOUR RADIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2
3
ALL ABOUT UCONNECT ACCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3
4
UCONNECT 8.4/8.4 NAV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
4
5
UCONNECT SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
5
6
VOICE RECOGNITION QUICK TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
6
SAFETY GUIDELINES
CONTENTS
䡵 SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . . . . .4
1
4 SAFETY GUIDELINES
SAFETY GUIDELINES
WARNING!
ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume
all risks related to the use of the Uconnect features
and applications in this vehicle. Only use Uconnect
when it is safe to do so. Failure to do so may result
in an accident involving serious injury or death.
Ensure that all persons read this manual carefully before
using the system. It contains instructions on how to use the
system in a safe and effective manner.
Please read and follow these safety precautions. Failure to
do so may result in injury or property damage.
• Glance at the screen only when safe to do so. If prolonged viewing of the screen is necessary, park in a safe
location and set the parking brake.
• Stop use immediately if a problem occurs. Failure to do
so may cause injury or damage to the product. Return it
to your authorized dealer for repair.
• Make certain that the volume level of the system is set to
a level that still allows you to hear outside traffic and
emergency vehicles.
Safe Usage of the Uconnect Access System
• Read all instructions in this manual carefully before
using your system to ensure proper usage!
• Your system is a sophisticated electronic device. Do not
let young children use your system.
• Permanent hearing loss may occur if you play your
music or the system at loud volumes. Exercise caution
when setting the volume on your system.
• Keep drinks, rain, and other sources of moisture away
from your system. Besides damage to your system,
moisture can cause electric shocks as with any electronic
device.
NOTE: Many features of this system are speed dependent.
For your own safety, it is not possible to use some of the
touchscreen features while the vehicle is in motion.
SAFETY GUIDELINES 5
Touchscreen
Disc Player — If Equipped
• Do NOT attach any object to the touchscreen, doing so
can result in damage to the touchscreen.
• Do not insert any damaged, warped, scratched or dirty
discs into the disc player.
• Do not press the screen with any hard or sharp objects
(pen, USB stick, jewelry, etc.) which could scratch the
touchscreen surface!
• Discs that have been modified with an adhesive label
should not be used in the disc player.
• Do not spray any liquid or caustic chemicals directly on
the screen! Use a clean and dry micro fiber lens cleaning
cloth in order to clean the touchscreen.
• If necessary, use a lint-free cloth dampened with a
cleaning solution, such as isopropyl alcohol, or an
isopropyl alcohol and water solution ratio of 50:50. Be
sure to follow the solvent manufacturer’s precautions
and directions.
• Do not insert more than one disc at a time into the disc
slot.
1
IDENTIFYING YOUR RADIO
CONTENTS
䡵 IDENTIFYING YOUR RADIO . . . . . . . . . . . . . . . .8
䡵 CYBERSECURITY . . . . . . . . . . . . . . . . . . . . . . . . .9
2
8 IDENTIFYING YOUR RADIO
IDENTIFYING YOUR RADIO
Uconnect 8.4/8.4 NAV
• SiriusXM Satellite Radio with 1 year Trial Included — If
Equipped
• Uconnect Access — U.S. Market Only — If Equipped
The 8.4 NAV sets itself apart by offering these unique
features:
• HD Radio — U.S. Market Only
• Navigation Standard
• One-shot destination entry
• 3D content (Select this option and zoom to an appropriate level. Not all tall buildings are in 3D)
• Enhanced Digital Terrain Model (DTM)
Key Features
The 8.4 and 8.4 NAV share some features between them,
but the 8.4 NAV has features that set it apart. The following
features are shared between radios:
• 8.4” Touchscreen
• Hands-free/Bluetooth
• USB port, AUX jack and SD Card slot — If Equipped
• Touchscreen Climate Controls
• SiriusXM Traffic with 5 year Trial Included — U.S.
Market Only — If Equipped
• SiriusXM Travel Link with 5 year Trial Included — U.S.
Market Only — If Equipped
NOTE: 3D Landmarks are visible at 250 ft (76 m) and
below, 3D City Models are visible at 50 ft (15 m) and below
and Digital Terrain is visible at 100 mi and below.
IDENTIFYING YOUR RADIO 9
CYBERSECURITY
Your vehicle may be a connected vehicle and may be
equipped with both wired and wireless networks. These
networks allow your vehicle to send and receive information. This information allows systems and features in your
vehicle to function properly.
Your vehicle may be equipped with certain security features to reduce the risk of unauthorized and unlawful
access to vehicle systems and wireless communications.
Vehicle software technology continues to evolve over time
and FCA US LLC, working with its suppliers, evaluates
and takes appropriate steps as needed. Similar to a computer or other devices, your vehicle may require software
updates to improve the usability and performance of your
systems or to reduce the potential risk of unauthorized and
unlawful access to your vehicle systems.
The risk of unauthorized and unlawful access to your
vehicle systems may still exist, even if the most recent
version of vehicle software (such as Uconnect software) is
installed.
WARNING!
• It is not possible to know or to predict all of the
possible outcomes if your vehicle’s systems are
breached. It may be possible that vehicle systems,
including safety related systems, could be impaired
or a loss of vehicle control could occur that may
result in an accident involving serious injury or
death.
• ONLY insert media (e.g., USB, SD card, or CD) into
your vehicle if it came from a trusted source. Media
of unknown origin could possibly contain malicious
software, and if installed in your vehicle, it may
increase the possibility for vehicle systems to be
breached.
• As always, if you experience unusual vehicle behavior, take your vehicle to your nearest authorized
dealer immediately.
2
10 IDENTIFYING YOUR RADIO
NOTE:
• FCA or your dealer may contact you directly regarding
software updates.
• To help further improve vehicle security and minimize
the potential risk of a security breach, vehicle owners
should:
www.driveuconnect.com/
• Routinely
check
software-update to learn about available Uconnect
software updates.
• Only connect and use trusted media devices (e.g.
personal mobile phones, USBs, CDs).
Privacy of any wireless and wired communications cannot
be assured. Third parties may unlawfully intercept information and private communications without your consent.
For further information, refer to “Privacy Practices – If
Equipped with Uconnect 8.4 radio” in “All About
Uconnect Access” in your Uconnect Owner’s Manual
Supplement and “Onboard Diagnostic System (OBD II)
Cybersecurity” in your Owner’s Manual.
ALL ABOUT UCONNECT ACCESS
CONTENTS
䡵 INTRODUCTION TO UCONNECT ACCESS . . . . .13
▫ Yelp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
▫ What Is Uconnect Access? . . . . . . . . . . . . . . . . .13
▫ Security Alarm Notification . . . . . . . . . . . . . . . .31
▫ Included Trial Period For New Vehicles . . . . . . .16
▫ Stolen Vehicle Assistance . . . . . . . . . . . . . . . . . .33
▫ Features And Packages . . . . . . . . . . . . . . . . . . .16
▫ Vehicle Finder . . . . . . . . . . . . . . . . . . . . . . . . . .35
䡵 GETTING STARTED WITH UCONNECT
ACCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
▫ Send ‘N Go . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
▫ Registration . . . . . . . . . . . . . . . . . . . . . . . . . . .17
▫ Download The Uconnect Access App . . . . . . . . .18
▫ Purchasing Apps And 3G Wi-Fi Hotspot For
Your Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . .19
▫ Using Mopar Owner Connect . . . . . . . . . . . . . .19
䡵 USING UCONNECT ACCESS . . . . . . . . . . . . . . . .21
▫ Getting Started With Apps . . . . . . . . . . . . . . . . .21
▫ 9-1-1 Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
▫ Roadside Assistance Call . . . . . . . . . . . . . . . . . .26
▫ 3G Wi-Fi Hotspot . . . . . . . . . . . . . . . . . . . . . . .38
▫ Voice Texting . . . . . . . . . . . . . . . . . . . . . . . . . .41
▫ Remote Door Lock/Unlock . . . . . . . . . . . . . . . .46
▫ Remote Vehicle Start . . . . . . . . . . . . . . . . . . . . .49
▫ Remote Horn And Lights . . . . . . . . . . . . . . . . .52
▫ Vehicle Health Alert . . . . . . . . . . . . . . . . . . . . .55
▫ Via Mobile Apps — If Equipped . . . . . . . . . . . .55
䡵 MAINTAIN MY UCONNECT ACCESS
ACCOUNT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
3
12 ALL ABOUT UCONNECT ACCESS
▫ How To Remove My Uconnect Access Account . .67
▫ Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . .71
▫ Adding Vehicles To My Uconnect Access
Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
▫ Safe Usage Of The Uconnect Access System . . . .72
䡵 UCONNECT CARE AND FAQs . . . . . . . . . . . . . .67
▫ Uconnect Care Business Hours: . . . . . . . . . . . . .67
䡵 DEVICE CONNECTION AND AUDIO TIPS
WITH UCONNECT . . . . . . . . . . . . . . . . . . . . . . .73
ALL ABOUT UCONNECT ACCESS 13
INTRODUCTION TO UCONNECT ACCESS
To unlock the full potential of Uconnect Access in your
vehicle, you first need to register with Uconnect Access.
WARNING!
• ALWAYS obey traffic laws and pay attention to the
road. Some Uconnect Access services, including 9-1-1
and Assist, will NOT work without an operable 1X
(voice/data) or 3G (data) network connection.
• ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume
all risks related to the use of the Uconnect features
and applications in this vehicle. Only use Uconnect
when it is safe to do so. Failure to do so may result in
an accident involving serious injury or death.
NOTE: Your vehicle may be transmitting data as authorized by the subscriber.
What Is Uconnect Access?
Uconnect Access enhances your ownership and driving
experience by connecting your vehicle with an operable 1X
(voice/data) or 3G (data) network. Uconnect Access is
available only on equipped vehicles purchased within the
continental United States, Alaska and Hawaii. Services can
only be used where coverage is available, see coverage
map for details.
For a complete list of Uconnect Access services, please visit:
DriveUconnect.com.
Uconnect Access provides:
• The ability to remotely lock/unlock your doors and start
your vehicle (if equipped) from virtually anywhere, with
the Uconnect Access App, the Mopar Owner Connect
website (moparownerconnect.com) and Uconnect
Care.
• The functionality to turn your vehicle into a 3G Wi-Fi
Hotspot on demand.
• Security Alarm Notification via text or E-mail.
• Yelp to help find great places, businesses and other
locations when you need them.
• Voice Texting so you can compose, send and receive text
messages with your voice while keeping your hands on
the wheel.
3
14 ALL ABOUT UCONNECT ACCESS
NOTE: Voice Texting through Uconnect Access is available
for Android phones only. iPhone texting is supported with
Siri and does not require a Uconnect Access subscription.
Before you drive, familiarize yourself with the easy-to-use
Uconnect System.
3. The Uconnect Voice Command And Uconnect Phone
Buttons On Your Steering Wheel
The buttons let you use your voice to give commands,
make phone calls, send and receive text messages
hands-free, enter navigation destinations and control
your radio and media devices.
1. The ASSIST And 9-1-1 Buttons On Your Rearview
Mirror
The ASSIST Button is used for contacting Roadside
Assistance, Vehicle Care and Uconnect Care. The 9-1-1
button connects you directly to emergency services.
2. The Uconnect “Apps” Button On The Menu Bar Of
The In-Vehicle Touchscreen
This is where you can begin registration for Uconnect
Access, find the Apps and purchase 3G Wi-Fi Hotspot
on demand.
1 — Phone Pick up Button
2 — Voice Recognition Button
3 — Phone Hang Up Button
ALL ABOUT UCONNECT ACCESS 15
3
1 — Uconnect Phone Button
2 — Uconnect Voice Command Button
3 — Phone Hang Up Button
4 — Steering Wheel Audio Controls (Left Rear Surface of Steering
Wheel)
5 — Steering Wheel Audio Controls (Right Rear Surface of Steering
Wheel)
6 — Uconnect Access 8.4 NAV Radio
7 — Volume Knob/Mute Button
NOTE: Interior trims may vary.
8 — Screen Off Button
9 — Tune or Scroll Knob/Browse or Enter Button
10 — Back Button
11 — USB Port
12 — AUX Port
13 — Uconnect Theater USB Port
14 — Power Outlet
15 — USB Port (Charging Only)
16 ALL ABOUT UCONNECT ACCESS
Included Trial Period For New Vehicles
Your new vehicle may come with an included trial period
for use of the Uconnect Access Services starting at the date
of vehicle purchase. To activate the trial, you must first
Radio
Radio Sales Code
Trial Period
register with Uconnect Access. Once registered, Uconnect
Access customers can purchase additional services and
Apps over the lifetime of their vehicle ownership.
Included Trial on New Vehicles ONLY
Uconnect 8.4
Uconnect 8.4 NAV
RA3
RA4
Six months of the Advantage Package
12 months of the Advantage Package
There are a few quick ways for you to identify your radio.
For a more complete description, please refer to the User
Guide in your glove box or visit DriveUconnect.com.
• Both the Uconnect 8.4 and Uconnect 8.4 NAV feature a
large 8.4 inch full color touchscreen.
• Only the Uconnect 8.4 NAV will have the HD Radio icon
when listening to FM or AM stations. The icon will be lit
when it is receiving an HD Radio signal (not all stations
currently broadcast an HD Radio signal).
Features And Packages
After the trial period, you can subscribe to continue your
service by visiting the Uconnect Store located within the
ALL ABOUT UCONNECT ACCESS 17
Mopar Owner Connect website (moparownerconnect.com).
If you need assistance, you can also call Uconnect Care at:
1-855-792-4241
For the latest information on packages and pricing information, visit DriveUconnect.com.
GETTING STARTED WITH UCONNECT ACCESS
Registration
To unlock the full potential of Uconnect Access in your
vehicle, you first need to register with Uconnect Access.
1. Push the ASSIST button on your rearview mirror.
2. Press the “Uconnect Care” button on the touchscreen.
3. A helpful Uconnect Care Agent will register your vehicle and handle all of the details.
Signing up is easy! Simply follow the steps above. Or,
press the “Apps
” button on the touchscreen to
“Register By Web” to complete the process using your
wireless device or computer.
For further information please visit DriveUconnect.com.
3
18 ALL ABOUT UCONNECT ACCESS
Download The Uconnect Access App
You’re only a few steps away from using remote commands and playing your favorite music in your car.
2. Press the Via Mobile icon on the navigation bar at the
bottom of the App.
3. Press the App you’d like to connect to your vehicle.
4. Enter your login information for the selected App and
press Link.
5. Next time you’re in your vehicle, enable Bluetooth, pair
your phone and select the Via Mobile App you want to
play from the Uconnect touchscreen to stream your
personalized music.
NOTE:
• You can also complete this process on the web. Simply
visit moparownerconnect.com log in and click Set Up
Via Mobile Profile (under Quick Links).
Mobile App
To link your internet radio accounts:
1. Download the Uconnect Access App to your mobile
device.
• Once you download the App to your compatible mobile
device, you will also be able to start your vehicle and
lock/unlock its doors from virtually anywhere. For
further information please visit DriveUconnect.com.
ALL ABOUT UCONNECT ACCESS 19
Purchasing Apps And 3G Wi-Fi Hotspot For Your
Vehicle
Apps and 3G Wi-Fi Hotspot can be purchased from the
Uconnect Store from within your vehicle, and online at the
Mopar Owner Connect website moparownerconnect.com.
You must first register and set up a Uconnect Payment
account.
Using Mopar Owner Connect
The
Mopar
Owner
Connect
website
moparownerconnect.com provides you with all the information you need, all in one place. You can track your
service history, find recommended accessories for your
vehicle, watch videos about your vehicle’s features, and
easily access your user guides and manuals. It is also where
you can manage your Uconnect Access account. This
section will familiarize you with the key elements of the
website that will help you get the most of your Uconnect
Access system.
• Your Vehicle(s):
Images are placed here to represent the FCA US LLC
vehicles (Chrysler, Jeep, Dodge, Ram and FIAT) you
own. If a vehicle you own is not shown here, click on the
“Add New Vehicle” button. Likewise, if a vehicle is
shown that you no longer own click on the “Edit Profile”
to manage your account.
• Edit Profile:
To manage the details of your Uconnect Access account,
such as your contact information, password and PIN,
click on the “Edit Profile” button to access the details of
your account.
• Shop:
To purchase a 3G Wi-Fi Hotspot and renew your subscription to a package, click on the “Shop” tab, then go
to the Uconnect Store to make your purchase.
• Connected Vehicle:
This statement will indicate which vehicle’s you own
that are equipped with the Uconnect Access system.
Other vehicles you own may not have Uconnect Access
and will indicate that it is a non-Uconnect Access
Vehicle.
• Remote Services:
For vehicles with an active Uconnect Access subscription, press one of these icons and enter your four-digit
3
20 ALL ABOUT UCONNECT ACCESS
Uconnect Security PIN to command your vehicle to
remotely start, lock/unlock doors or sound the horn and
lights.
• Subscription Status:
Refer to this section to quickly see if you are currently
subscribed to remote services.
• Uconnect Access App:
This is where you can enter the mobile phone number
for your compatible device to download the Uconnect
Access App. Device compatibility can be verified at
UconnectPhone.com. For more details, see the section
labeled Download the Uconnect Access App.
• Learn & Use:
Click on the “Learn & Use” tab to find user guides and
other information about your vehicle. More specifically,
there is a dedicated Uconnect Access tab in this section
to learn all about your connected vehicle capabilities.
Editing Your Notifications
Notifications are an important element of your Uconnect
Access Account. For example, any time you use your
remote services (such as Remote Door Unlock), or if your
security alarm is set off, you can elect to receive a text
message and/or E-mail to notify you of the event. To set up
the notifications, please follow these instructions.
1. Log on to moparownerconnect.com
2. Click the “Edit Profile” button in the upper-right corner
of the page.
3. Click the Uconnect Notifications tab on the left side of
the page.
4. If you have more than one vehicle with Uconnect
Access, please select which vehicle you want to manage
notifications for using the drop down menu.
5. You can enter up to five mobile phone and/or email
addresses to your notifications, and you can customize
which ones receive the types of messages.
6. If you add a mobile phone number, you will receive a
confirmation text message asking to confirm and receive
vehicle notifications. If you are OK with this, reply to the
text message saying “yes” (message and data rates may
apply, please see your mobile phone provider for details). If you have questions, text “HELP” in your reply.
ALL ABOUT UCONNECT ACCESS 21
USING UCONNECT ACCESS
App Manager
Getting Started With Apps
Press the “App Manager” button to access the following
categories:
Applications (Apps for short) in your Uconnect Access
system are designed to deliver the features and services
that you want. There are two basic categories:
• Favorite Apps — this is a good place to put the Apps
you use most frequently.
• Built-In Apps — uses the 1X (voice/data) or 3G (data)
network on your Uconnect 8.4 or 8.4 NAV radio.
• All Apps — all of your available Apps will reside in the
“All Apps” folder.
• Uconnect Access via Mobile (if equipped) — uses the
Uconnect Access App and your device’s data plan to
access your personal Pandora, iHeartRadio, Aha and
Slacker accounts from the vehicle and control them
using the vehicle touchscreen. Customer’s data plan
charges will apply.
• Running Apps — press this tab to see which Apps are
currently running.
Apps Main Menu
” button on the touchscreen to open
Press the “Apps
the Apps main menu, in this screen you will be able to
access all of your available Apps. To access an App
directly, press the corresponding button on the touchscreen and you will be directed to that App. To view the
rest our your Apps, press the page forward or page back
button.
NOTE: Most Uconnect Access features do not require that
you have a compatible device. The Uconnect Access features must have an operable 1X (voice/data) or 3G (data)
network connection and you must be registered with
Uconnect Access with an active subscription. Only Voice
Texting the Uconnect Access App and Via Mobile Apps
require a compatible device to work with your Uconnect
Access system.
3
22 ALL ABOUT UCONNECT ACCESS
Uconnect Access In-Vehicle Assistance Features
9-1-1 Call
WARNING!
Some Uconnect Access services, including 9-1-1 and
assist will NOT work without an operable 1X (voice/
data) or 3G (data) network connection.
Access To Emergency Services At The Push Of A Button
With Uconnect Access, your vehicle has on-board assistance features located on the rear view mirror designed to
enhance your driving experience if you should ever need
assistance or support.
Description
9-1-1 Call is a feature that, at the push of a button, can
contact emergency services. It’s a convenient way to get in
contact with a 9-1-1 operator in the event of an emergency.
When the connection between the vehicle and a 9-1-1
operator is made, your vehicle will automatically transmit
location information to the 9-1-1 operator.
How It Works
1. Push the “9-1-1” Call button on the Rearview Mirror; the
indicator light will turn green indicating a call has been
placed.
ALL ABOUT UCONNECT ACCESS 23
NOTE:
• In case the “9-1-1” Call button is accidentally pushed,
there is a 10 second delay before the 9-1-1 call is
placed. The system will verbally alert you that a call is
about to be made. To cancel the 9-1-1 Call connection,
push the “9-1-1” Call button on the Rearview Mirror or
press the “Cancellation” button on the Phone Screen.
• During a 911 call the Bluetooth paired phone is disconnected so incoming or outgoing calls will go
through mobile versus the handsfree system which is
not available due to the 911 call.
2. Once a connection between the vehicle and a 9-1-1
operator is made, the 9-1-1 Call system will transmit the
following important vehicle information to a 9-1-1 operator:
• Indication that the occupant placed a 9-1-1 Call.
• The vehicle brand.
• The last known GPS coordinates of the vehicle.
may, like any other 9-1-1 call, record conversations and
sounds in and near your vehicle upon connection.
9-1-1 Call System Limitations
Vehicles sold in Canada and Mexico DO NOT have 9-1-1
Call system capabilities. 9-1-1 or other emergency line
operators in Canada and Mexico may not answer or
respond to 9-1-1 system calls.
If the 9-1-1 Call system detects a malfunction, any of the
following may occur at the time the malfunction is detected:
• The Rearview Mirror light will continuously be illuminated red.
• The screen will display the following message “Vehicle
phone requires service. Please contact your dealer.”
• An In-Vehicle Audio message will state “Vehicle phone
requires service. Please contact your dealer.”
3. You should be able to speak with the 9-1-1 operator
through the vehicle audio system to determine if additional help is needed.
Even if the 9-1-1 Call system is fully functional, factors
beyond FCA US LLC’s control may prevent or stop 9-1-1
Call system operation. These include, but are not limited
to, the following factors:
If a connection is made between a 9-1-1 operator and your
vehicle, you understand and agree that 9-1-1 operators
• The ignition key has been removed from the ignition
and the delayed accessories mode is active.
3
24 ALL ABOUT UCONNECT ACCESS
• The ignition key is in OFF position.
• The vehicle’s electrical systems are not intact.
• The 9-1-1 Call system software and/or hardware is
damaged during a vehicle crash.
If your vehicle loses battery power for any reason (including during or after an accident) the 9-1-1 Call System,
among other vehicle systems, will not operate.
• The vehicle battery loses power or becomes disconnected during a vehicle crash.
• 1X (voice/data) or 3G (data) network and/or Global
Positioning Satellite signals are unavailable or
obstructed.
• Equipment malfunction at the 9-1-1 operator facility.
• Operator error by the 9-1-1 operator.
• 1X (voice/data) or 3G (data) network congestion.
• Weather.
• Buildings, structures, geographic terrain, or tunnels.
NOTE: The signal strength bars on the “Apps ” button on
the touchscreen will show a single bar and a prohibition
to indicate your vehicle is not connected to an
symbol
operable 1X (voice/data) or 3G (data) network.
Requirements
• This feature is available only on vehicles sold in the U.S.
• Vehicle must be properly equipped with the Uconnect
Access System.
• Vehicle must have an operable 1X (voice/data) or 3G
(data) network connection.
ALL ABOUT UCONNECT ACCESS 25
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
WARNING!
• Never place anything on or near the vehicle’s 1X
(voice/data) or 3G (data) and GPS antennas. You
could prevent 1X (voice/data) or 3G (data) and GPS
signal reception, which can prevent your vehicle
from placing an emergency call. An operable 1X
(voice/data) or 3G (data) network connection and a
GPS signal is required for the 9-1-1 Call system to
function properly.
• Do not add any aftermarket electrical equipment to
the vehicle’s electrical system. This may prevent your
vehicle from sending a signal to initiate an emergency call. To avoid interference that can cause the
9-1-1 Call system to fail, never add aftermarket
equipment (e.g., two-way mobile radio, CB radio,
data recorder, etc.) to your vehicle’s electrical system
or modify the antennas on your vehicle. IF YOUR
VEHICLE LOSES POWER FOR ANY REASON (INCLUDING DURING OR AFTER AN ACCIDENT)
WARNING! (Continued)
THE UCONNECT FEATURES, APPS AND SERVICES AMONG OTHERS WILL NOT OPERATE.
• The Occupant Restraint Controller (ORC) turns on
the Air Bag Warning Light on the instrument panel if
a malfunction in any part of the air bag system is
detected. If the Air Bag Warning Light is illuminated,
the air bag system may not be working properly and
the 9-1-1 system may not be able to send a signal to
a 9-1-1 operator. If the Air Bag Warning Light is
illuminated, have an authorized dealer service your
vehicle immediately.
• Ignoring the Rearview Mirror light could mean you
will not have 9-1-1 Call services if needed. If the
Rearview Mirror light is illuminated, have an authorized dealer service the 9-1-1 Call system immediately.
• If anyone in the vehicle could be in danger (e.g., fire
or smoke is visible, dangerous road conditions or
location), do not wait for voice contact from a 9-1-1
operator. All occupants should exit the vehicle immediately and move to a safe location.
(Continued)
(Continued)
3
26 ALL ABOUT UCONNECT ACCESS
WARNING! (Continued)
• Failure to perform scheduled maintenance and regularly inspect your vehicle may result in vehicle
damage, accident or injury.
Roadside Assistance Call
Easy Call To Roadside Assistance 24/7 Using ASSIST
Button
FAQs
1. What Happens If I Accidentally Push The 9-1-1 Button
On The Mirror? You have 10 seconds after pushing the
9-1-1 button to cancel the call. To cancel the call, either
push the “9-1-1” button again, or press the “cancel”
button on the in-vehicle touchscreen.
2. What Type Of Information Is Sent When I Call 9-1-1
From My Vehicle? Certain vehicle information, such as
make and model, is transmitted along with last known
GPS location. Also note that 9-1-1 operators may record
conversations and sounds within your vehicle once a
connection is made, and that by using the service you
consent to having this information shared.
3. When Could I Use The 9-1-1 Button? You can use the
9-1-1 button to make a call if you or someone else needs
emergency assistance.
Uconnect Access In-Vehicle Assistance Features
With Uconnect Access, your vehicle has on-board assistance features located on the rear view mirror designed to
enhance your driving experience if you should ever need
assistance or support.
Description
Vehicles equipped with the Uconnect Access system feature will contain an ASSIST button on the rear view mirror.
ALL ABOUT UCONNECT ACCESS 27
Once the vehicle has been registered and is subscribed to
the Advantage Package, the ASSIST button can connect
you directly to one of three important care centers for
support.
• Roadside Assistance — If you get a flat tire, or need a
tow, you’ll be connected to someone who can help
anytime. Additional fees may apply. (See the Disclaimers section below for more detail).
3
• Uconnect Care — In vehicle support for Uconnect
Access System, Apps, and Features.
• Vehicle Care — Total support for your vehicle.
How It Works
You or someone in the vehicle simply presses the ASSIST
button located on the rear view mirror and you will be
presented with your ASSIST options. Make your selection
by pressing the touchscreen.
NOTE: The signal strength bars on the “Apps ” button on
the touchscreen will show a single bar and a prohibition
symbol
to indicate your vehicle is not connected to an
operable 1X (voice/data) or 3G (data) network.
Requirements
• This feature is available only on vehicles sold in the U.S.
• Vehicle must be properly equipped with the Uconnect
Access System.
• Vehicle must have an operable 1X (voice/data) or 3G
(data) network connection.
28 ALL ABOUT UCONNECT ACCESS
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
NOTE: Some Apps are suspended while an Assist call is
active.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
2. If I Am Subscribed To Uconnect Access, Does It Cover
Towing Or Other Expenses Incurred By Using FCA
Roadside Assistance? No, however your new vehicle
may include Roadside Assistance services.
Disclaimers
Yelp
If Roadside Assistance is provided to your vehicle, you
agree to be responsible for any additional roadside assistance service costs that you may incur. In order to provide
Uconnect Services to you, we may record and monitor your
conversations with Roadside Assistance, Uconnect Care or
Vehicle Care, whether such conversations are initiated
through the Uconnect Services in your vehicle, or via a
landline or mobile device, and may share information
obtained through such recording and monitoring in accordance with regulatory requirements. You acknowledge,
agree and consent to any recording, monitoring or sharing
of information obtained through any such call recordings.
Looking for a burrito joint that is open? A boutique to buy
a new pair of jeans? Yelp is here to help. Use Yelp to search
for places to eat, shop, relax and play.
FAQs
1. What Is The Phone Number For Roadside Assistance?
The phone number is:
800-521-2779
Description
Yelp is a familiar, widely used website and mobile App that
connects people to great local businesses. Now with
Uconnect Access, Yelp has been adapted for your vehicle,
and on the go capability. Yelp gives you the ability to search
for a Point of Interest (POI) or desired destination using
either pre-defined search categories, or custom searches,
using keywords like “tacos.” Searching can be done by
voice recognition or by using the touchscreen keypad.
Here is what Yelp can do for you while you are on the road:
• Deliver a list of up to 20 results, prioritizing by best
match, by distance or rating.
ALL ABOUT UCONNECT ACCESS 29
• Provide up-to-date search listings (pulling the latest
information from the cloud).
• The live and local search engine will scan 12 categories
and millions of POIs to provide drivers with a local
guide for real word-of-mouth recommendations.
3
• With one press, select from the list to find location
address, phone number, user ratings, hours of operation
(if available) and price ratings (if available).
• The ability to call the selected POI directly (a device
must be paired via Bluetooth), or have the address
immediately sent to the navigation system for routing (if
equipped).
How It Works
1. Using the touchscreen, launch Yelp by pressing Apps
> Yelp.
OR
Using voice recognition, push the
“Launch Yelp.”
button and say
Give It A Try!
button on the steering wheel and say
1. Push the
“Launch Yelp.”
2. Push the
button on the steering wheel and say
“Yelp Search.”
3. Uconnect will prompt you to say something like, “car
wash.” After the beep, say “restaurants.”
4. The Uconnect system will link out to the cloud to do
your Yelp search, and depending on your search request, this may take up to 30 seconds.
30 ALL ABOUT UCONNECT ACCESS
5. Using the touchscreen, select a restaurant from the list of
search results.
6. Navigate to the location by pressing “Go Now” (if
equipped with navigation).
NOTE: Save your destination to Favorites. To find it again
go to Nav > Where to > Favorites.
How To Add And Delete Search Categories
Yelp provides the ability to save custom search categories
. To
by first initiating the search, then pressing the star
delete a search category, select it, and press the star
.
A confirmation prompt will appear to confirm. Create
up to 36 custom search categories!
Requirements
• Vehicle must be properly equipped with the Uconnect
Access System.
• Your vehicle must be in range of an operable 1X (voice/
data) or 3G (data) network connection (indicated by the
” button on the
signal strength bars on the “Apps
touchscreen).
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
• Vehicle must have onboard navigation to use Go Now.
• Mobile device must be paired with Bluetooth and connected to call a POI directly.
Safety Information
WARNING!
• ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume
all risks related to the use of the Uconnect features
and applications in this vehicle. Only use Uconnect
when it is safe to do so. Failure to do so may result in
an accident involving serious injury or death.
ALL ABOUT UCONNECT ACCESS 31
Tips And Shortcuts
Security Alarm Notification
• To improve your search results, use single search terms
like “coffee” rather than multiple words, which may
deliver mixed results, for example, “home improvement
and gardening stores.”
Notifies you via email or text message (SMS) when the
vehicle’s factory-installed security alarm system has been
set-off.
• Press the “microphone” on the touchscreen to use voice
commands.
• If you wish to cancel a search request, press “Cancel.”
• To learn more about a listing, press the line that appears
on the display details such as the address, phone number and hours of operation (if applicable).
• Sort results by Best Match, Rating or Distance (default is
Best Match).
• The Rating tab will re-sort your search based on ratings
submitted by everyday users to Yelp’s online database.
• Distance will sort by the closest POI near you.
button a second
• To bypass the voice prompts hit the
time to barge in and state your desired command.
• To exit Yelp, press the “X” (close) button in the upper
right corner of the touchscreen.
Description
The Security Alarm Notification feature notifies you via
email or text message (SMS) when the vehicle’s factoryinstalled security alarm system has been set-off. You’ve
probably seen this before, a vehicle’s alarm goes off in a
parking lot or out on the street, and the owner is nowhere
to be found. With Security Alarm Notification your vehicle
will alert you of the situation.
Should you receive a notification that your security alarm
has been set-off, please react with caution. There are a
number of reasons why your alarm may have been triggered, one of which could be that your vehicle was stolen.
If so, please see the details of the Stolen Vehicle Assistance
service below.
How It Works
Security Alarm Notification can send you an email or text
message (SMS) should the alarm go off. The following
instructions will help you manage your notifications.
3
32 ALL ABOUT UCONNECT ACCESS
1. Log on to the Mopar Owner Connect website
(moparownerconnect.com) using the username and
password you used when registering your Uconnect
Access system.
• If you forgot your username or password, links are
provided on the website to help you retrieve them.
2. Once logged in you will find yourself on the Dashboard.
Click on the “Edit Profile” button in the upper-right
corner of the page.
3. Click on the “Notifications” tab on the left side of the
page.
4. If you have more than one vehicle with Uconnect
Access, please select which vehicle you want to manage
notifications for using the drop down menu.
5. You can enter up to five mobile phone and/or email
addresses to your notifications, and you can customize
which ones receive the types of messages.
6. You will receive a confirmation text message, asking to
confirm and receive vehicle notifications. If you are ok
with this, reply to the text message saying “yes” (message and data rates may apply, please see your mobile
device provider for details). If you have questions, text
“HELP” in your reply.
7. You’re all set. Should your security alarm go off, a
notification(s) will be sent to the number(s) and/or
email(s) you provided.
Requirements
• Vehicle must be properly equipped with the Uconnect
Access System and a factory installed security Alarm
system.
• Your vehicle must have an operable 1X (voice/data) or
3G (data) network connection.
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
• Owner must properly set-up notification to have the
Security Alarm Notification sent to an appropriate mobile device or email account.
CAUTION!
In the event your theft alarm is activated, use
caution and evaluate the situation from a safe distance. If any unauthorized or suspicious person is
(Continued)
ALL ABOUT UCONNECT ACCESS 33
CAUTION! (Continued)
near or inside of your vehicle, immediately contact
the police. Do not do anything that could jeopardize
your safety or the safety of those around you.
FAQs
1. What do I do if my Security Alarm goes off? In the
event your security alarm is activated, use caution and
evaluate the situation from a safe distance. If any
unauthorized or suspicious person is near or inside of
your vehicle, immediately contact the police. Do not do
anything that could jeopardize your safety or the safety
of those around you.
2. How can I change where I receive notifications? You
can manage your notifications by going to the Mopar
Owner Connect website (moparownerconnect.com)
and log in with your username and password. Once
there, you can click on “Edit Profile”, then the “Notifications” tab.
3. Can I receive a text message (SMS) when my Security
Alarm goes off? Yes. Text messages are a convenient
and quick way to receive notifications. You can manage
your notifications by going to the Mopar Owner Connect website (moparownerconnect.com) and log in
with your username and password. Once there, you can
click on “Edit Profile”, then the “Notifications” tab to
add, remove and edit your notification options.
Stolen Vehicle Assistance
If your vehicle is ever stolen, this App (with your permission) can provide its location to the law enforcement to
help them track it down.
Description
If your vehicle is stolen, contact local law enforcement
immediately to file a stolen vehicle report. Once this report
has been filed with law enforcement and you have also
notified Uconnect Care that you have filed the report,
Uconnect Care can help locate your vehicle. The Uconnect
Care Agent will ask for the stolen vehicle report number
issued by local law enforcement. As long as your vehicle
has an operable 1X (voice/data) or 3G (data) network
connection, the Uconnect Care Agent may be able to locate
the stolen vehicle and work with law enforcement to help
recover it. The Vehicle must have an operable 1X (voice/
3
34 ALL ABOUT UCONNECT ACCESS
data) or 3G (data) network connection and must be registered with Uconnect Access with an active subscription
that includes the applicable feature (Vehicle must be within
the United States, have network coverage and must be
registered with Uconnect Access with an active subscription that includes the applicable feature).
Stolen Vehicle Assistance is a secure process that can only
be done with your permission. Law enforcement gets
involved only after you file a stolen vehicle report with
them.
How It Works
1. If your vehicle is stolen, contact local law enforcement as
soon as possible. They will work with you to file a stolen
vehicle report.
2. Next, inform Uconnect Care that your vehicle has been
stolen. Uconnect Care can be reached by calling:
1-855-792-4241
The Uconnect Care Agent will ask for the stolen vehicle
report number (as issued by your local law enforcement). If you have downloaded the Uconnect Access
App, you can push the “Operator” button on your
device and select “Uconnect Care” to make the call.
3. Uconnect Care will authenticate that you are the owner
of the vehicle and contact the law enforcement with
whom you filed the stolen vehicle report.
4. Uconnect Care will work with your local law enforcement to track and attempt to recover the vehicle. You
will be contacted by law enforcement if your vehicle is
recovered. While the investigation is ongoing, you
should also contact your insurance company to inform it
of the situation.
Requirements
• Vehicle must be properly equipped with the Uconnect
Access System.
• Vehicle must have an operable 1X (voice/data) or 3G
(data) network connection.
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
Disclaimers
• No security system is invincible, and vehicle thieves
may develop ways to prevent your vehicle from being
located.
ALL ABOUT UCONNECT ACCESS 35
FAQs
1. What to do if my vehicle is stolen? First, call local law
enforcement as soon as possible. They will work with
you to file a stolen vehicle report. Then call Uconnect
Care at:
1-855-792-4241
and inform Uconnect Care that your vehicle has been
stolen and that you have filed a stolen vehicle report
with law enforcement. Uconnect Care will help you
through the process.
2. Can someone track my vehicle? To ensure your privacy,
and the privacy of others using your vehicle, you must
involve local law enforcement to have Uconnect locate
your vehicle. This helps to ensure that someone is not
tracking your vehicle for purposes other than at your
request to locate it in the event it is stolen.
3. How will I know if my vehicle is recovered? After you
provide the Uconnect Care Agent with the stolen vehicle
report, the agent will work together with law enforcement to try to locate your vehicle. If your vehicle is
recovered, you will be contacted by law enforcement.
4. Can Uconnect Access lower my insurance rates? Some
insurance providers offer lower rates on vehicles
equipped with systems that can deter auto theft. When
shopping for insurance, be sure to inform your insurance provider of your Uconnect Access system (Stolen
Vehicle Assistance requires a subscription), to find out if
your insurance provider offers a lower rate if your
vehicle is equipped with Uconnect access and you have
an active subscription.
Vehicle Finder
Forget where you parked your car? We’ll help you locate it!
Simply use the Uconnect Access App on your smartphone
and you’ll be on track.
Description
The Vehicle Finder feature of the Uconnect Access Mobile
App allows you to find the location of your vehicle when
you have lost it. You can also sound the alarm and flash the
lights to make finding your vehicle even easier.
How It Works
Use the Uconnect Access App to find the location of your
vehicle.
3
36 ALL ABOUT UCONNECT ACCESS
1. Select the “Location”
tab at the bottom of the App,
you can choose how you want the information displayed.
Requirements
2. Choose how you want to view the information by
pressing the “View” icon on the “Location” tab. Three
options will appear:
• Map
• Satellite
• Hybrid
• Vehicle must have an operable 1X (voice/data) or 3G
(data) network connection.
3. Select the “Vehicle” icon to determine the location of
your vehicle, or select the “Person” icon to see your
location.
4. Using the two icons you can locate your vehicle based
on your position, and when the “Vehicle” icon is selected two options will appear, allowing you to sound
the vehicle’s alarm, or map a route to your vehicle.
NOTE:
• In order to sound your vehicle’s alarm you will need to
enter your Uconnect Access PIN.
• In order to map a route to your vehicle’s location, you
will need to select a Navigation App on your mobile
device, when prompted, to launch the route in.
• Vehicle must be properly equipped with the Uconnect
Access System.
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
FAQs
1. Can someone track my vehicle? To ensure your privacy,
and the privacy of others using your vehicle, you must
involve local law enforcement to have Uconnect locate
your vehicle. This helps to ensure that someone is not
tracking your vehicle for purposes other than at your
request to locate it in the event it is stolen.
2. How long does it take to sound my horn and flash the
lights? Depending on various conditions, it can take
three minutes or more for the request to get through to
your vehicle, although Uconnect Access is always striving to improve performance.
ALL ABOUT UCONNECT ACCESS 37
3. How do I turn off the horn and lights after I turn them
on? By pressing the “horn icon” a second time on your
Uconnect Access App, a second command will be sent to
shutoff the horn and lights. Alternatively, if you are
close enough to the vehicle you can use the Key Fob to
turn off the horn and lights by pressing the red “Panic”
button.
Send ‘N Go
Use the mobile app to easily search and send your locations directly to your vehicle navigation system. Its easy to
enter and great for quick access on the go.
Description
type the name or keyword in the search box at the top
of the App.
2. Select your destination from the list that appears. Location inforation will then be displayed on the map.
From this screen, you will be able to:
• View the location on a map
• See the distance from your current location
• Send the address
3. Send the destination to the Uconnect Navigation in your
vehicle. You can also call the destination, by pressing the
“Call” button.
The Send ‘N Go feature of the Uconnect Access Mobile App
allows you to search for a destination on your mobile
device and then send the route to your vehicle’s native
navigation system.
4. Confirm your destination inside your vehicle by pressing the “Go Now” option on the pop-up that appears on
the radio touchscreen.
How It Works
• Vehicle must be properly equipped with the Uconnect
Access System.
1. Use the Uconnect Access App to find the destination.
There are two ways to find a destination. After selecting
tab at the bottom of the App, either
the “Location”
browse through one of the categories provided, or
Requirements
• Vehicle must have an operable 1X (voice/data) or 3G
(data) network connection.
3
38 ALL ABOUT UCONNECT ACCESS
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
FAQs
1. How long does it take to send the route and destination to my vehicle? Depending on various conditions, it
can take three minutes or more for the request to get
through to your vehicle, although Uconnect, and
SiriusXM are always striving to improve performance.
2. Can I cancel a route I sent to my vehicle? Yes, once you
enter your vehicle, and start the engine, the pop-up
message stating that you have a new route will appear.
There is an exit button on the pop-up that will cancel to
route if selected.
3. Can I select a different route than the most recent one
I sent to my vehicle? Yes, once you enter the vehicle,
and start the engine, the pop-message has a “Locations”
option. Once “Locations’ is selected you can choose
from a list of recently sent destinations.
3G Wi-Fi Hotspot
Create A 3G Wi-Fi Hotspot For Use In Your
Vehicle
Description
3G Wi-Fi Hotspot is an in-vehicle feature that connects
your device to an operable 1X (voice/data) or 3G (data)
network using Uconnect Access and is ready to go where
ever you are. Once your vehicle is registered for Uconnect
Access, you can purchase a 3G Wi-Fi Hotspot subscription
at the Uconnect Store. After you’ve made your purchase,
turn on your signal and connect your devices.
WARNING!
NEVER use the 3G Wi-Fi Hotspot if you are driving
the vehicle. Failure to do so may result in an
accident involving serious injury or death.
• Enables all your passengers to be simultaneously connected to the web.
• Connect several devices at one time.
ALL ABOUT UCONNECT ACCESS 39
• Any Wi-Fi-enabled device — such as a laptop or any
other portable enabled media can connect over your
private in-vehicle network.
NOTE: You must set up your Uconnect Payment Account
on the Mopar Owner Connect website and establish a
Uconnect Payment PIN to purchase 3G Wi-Fi Hotspot.
• A high-speed, secured connection lets anyone on your
private network access the Web — great for working and
relaxing.
2. After purchasing 3G Wi-Fi Hotspot, it will be enabled/
turned on in your vehicle. The 3G Wi-Fi Hotspot App
can be found on your in-vehicle touchscreen by selecting Apps
> 3G Wi-Fi Hotspot.
How It Works
The 3G Wi-Fi Hotspot feature provides the vehicle passengers with an internet access hot spot in the vehicle, using
the radio as an access point. The hot spot will allow Wi-Fi
enabled in-vehicle devices (such as a laptop or any other
portable enabled media device) to wirelessly connect to the
internet.
Give it a Try!
1. Purchase a subscription to the 3G Wi-Fi Hotspot feature
for a day, a week, or a month. You can buy the 3G Wi-Fi
Hotspot in one of two ways:
>
• From your in-vehicle touchscreen (Apps
Uconnect Store).
• From the Mopar Owner Connect website
(moparownerconnect.com) > Shop > Uconnect Store.
3. 3G Wi-Fi Hotspot should be turned on after purchasing
a subscription. To disable 3G Wi-Fi Hotspot, simply
press to uncheck the box to the right of the App (this
feature is available while the vehicle is in motion).
3
40 ALL ABOUT UCONNECT ACCESS
Optional: Give your hot spot a unique name by pressing
Hotspot Name (key pad is not available while vehicle is
in motion).
• None — No security, will not prompt you for a pass
phrase, when you attempt to connect to 3G Wi-Fi
Hotspot.
5. From your Wi-Fi enabled device (laptop, tablet, etc.).
• Search for and select the Uconnect hotspot in the
settings of your device.
• Type the network security key (this is called “pass
> 3G Wi-Fi Hotspot
phrase” and is found in Apps.
> View/Edit Pass phrase).
• Click OK.
You are now connected!
WARNING!
4. From your in-vehicle touchscreen, select the appropriate
in-vehicle network and the desired security level setting.
Each security level has different pass phrase constraints.
Change the security level setting by selecting the checkbox for any of the following security settings.
• WPA2/WPA — “Wi-Fi Protected Access” – This is the
default security and can be changed by pressing 3G
Wi-Fi Hotspot > View/Edit Pass phrase.
• WEP — “Wired Equivalent Privacy” – Pass phrase
must be 13 characters long.
ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
related to the use of the Uconnect features and applications in this vehicle. Only use Uconnect when it is
safe to do so. Failure to do so may result in an accident
involving serious injury or death.
ALL ABOUT UCONNECT ACCESS 41
Voice Texting
How It Works
Add Free-Form Voice Texts To Your Voice Text Reply
Feature
Set Up Your Device To Work With Voice Texting
Description
This Voice Texting enhances the Voice Text Reply feature
built into your Uconnect Access 8.4 and 8.4 NAV radio.
While Voice Text Reply provides 18 pre-defined messages
you can send, Voice Texting lets you create and send nearly
any message you want. Just speak your message as if you
were talking to the recipient, and the Uconnect Access
voice-texting technology will convert your voice into a text
message.
Voice Texting and Voice Text Reply features are compatible
with many newer Android and Blackberry devices. Before
using, determine if your device has been tested to support
Bluetooth “Message Access Profile (MAP)” at
UconnectPhone.com. iPhone and some other devices do
not currently support Bluetooth MAP. Ensure MAP is ON
and incoming message notification is enabled.
After pairing your device to the vehicle using Bluetooth see
(UconnectPhone.com), push the “phone” button on the
menu bar of the radio to see the main Phone screen. A
minute or so after a compatible MAP enabled device has
been Bluetooth connected to the vehicle; the “messaging”
button on the touchscreen will change from gray to white.
This is an indicator that Voice Texting will work with your
device. Outgoing voice texts may not be possible. The
device may allow incoming texts only.
Determine if your device has been tested to support
Bluetooth “Message Access Profile” (MAP) - at
UconnectPhone.com. (Your device may support Voice
Texting even if not found on this website. Check with your
device manufacturer to see if it supports MAP protocol.)
NOTE: If your device supports MAP, then ensure MAP is
on and incoming message notification is enabled, (see
UconnectPhone.com for device specific instructions).
Follow the steps below to see if your device can set up to
work with Voice Texting.
3
42 ALL ABOUT UCONNECT ACCESS
5. When finished dictating, wait for prompt and say
“Send.”
Viewing Or Listening To Incoming Messages
To Listen to a Message from Radio
1. Push the ⬙Phone⬙ button on the steering wheel. Say
ⴖListen to message.ⴖ
OR
Press the ⬙Listen⬙ button on the touchscreen.
Viewing Your Messages
If a Bluetooth authorization window appears showing
your device requesting permissions, check the box for
Always and press Accept.
Sending A New Text Message From Radio
1. Push
on the steering wheel.
2. Say “Send text message.”
3. The system will respond “Say the phone number or the
full name and the phone type of the contact that you
want to send a message to.”
4. Dictate message (“I will be home at eight.”)
1. Push the “Phone” button on the steering wheel.
ALL ABOUT UCONNECT ACCESS 43
2. Say “View message.”
OR
Press “View” on the in-vehicle touchscreen.
Listening To A Message
1. Press “Listen” on the touchscreen or push the “Phone”
button on the steering wheel and say “Listen,” the
Uconnect system will read the received text message
over the vehicle audio system.
Barge-In
Barge-in is a feature that enables a user to say a valid
command without waiting for the system to finish speaking. When the system is “speaking” you can push the
button on the steering wheel and say a valid command.
Contact names or phone numbers of the message sender
appears in a list along with View and Listen buttons on
the touchscreen.
Viewing A Specific Message
1. Press “View” next to the contact name/phone number
of the message you want to be displayed.
OR
Say “Show message n.”
n = the number of the message
For example, if the system is explaining all of the options
available after dictating a text message, at any time the user
can press ⬙Listen⬙ on touchscreen or push the ⬙Phone⬙
button on the steering wheel and say ⬙Listen.⬙
Requirements
• (MAP may not be compatible with Apple iPhones (pre
iOS 6). Apple iOS 6 supports receiving text messages,
but does not support sending text messages).
• Available on vehicles sold in the United States with a
Uconnect 8.4 (sales code RA3) or Uconnect 8.4 NAV
(sales code RA4) radio equipped with Uconnect Access.
3
44 ALL ABOUT UCONNECT ACCESS
• Vehicle must be registered with an active Uconnect
Access Advantage trial or paid subscription for free
form text response to work.
• Vehicle and device must have an operable 1X (voice/
data) or 3G (data) network connection.
• Customer must have a properly paired and connected
device with Bluetooth Message Access Profile (MAP)
enabled. Voice Texting is compatible with many newer
BlackBerry and Android mobile devices. Apple iOS
5 and earlier does not support MAP so iPhones will not
send free form text messages. Apple iOS 6 supports
receiving, not sending text messages. To check if your
device has been tested to be compatible please visit
UconnectPhone.com.
Disclaimers
• Not all Voice Texting features may be available on your
device.
• Your MAP supported device must be paired and connected to a compatible Uconnect radio.
• Vehicle must have an operable 1X (voice/data) or 3G
(data) network connection to voice text.
• FCA US LLC Uconnect and its affiliates are not responsible for errant text messages.
• Vehicle must be registered with an active Uconnect
Access trial or paid subscription.
WARNING!
ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume
all risks related to the use of the Uconnect features
and applications in this vehicle. Only use Uconnect
when it is safe to do so. Failure to do so may result
in an accident involving serious injury or death.
FAQs
1. Can I still voice text if my device is not listed? We are
constantly testing devices and updating our compatibility database. If your device is not listed, you may still be
able to pair and connect your MAP supported device to
a compatible Uconnect radio to see if all or most voice
texting functions work. Check your device manufacturer if MAP is supported on your device.
ALL ABOUT UCONNECT ACCESS 45
2. Can I use voice texting while in my other FCA vehicle?
The Voice Texting free text response feature is available
only on Uconnect 8.4 (sales code RA3) or Uconnect
8.4 NAV (sales code RA4) radios. Other FCA vehicles do
support hands free texting, but only with fixed responses.
3. My “Messaging” button on the touchscreen is White,
but I can only use pre-formatted responses. The Voice
Texting free-form voice response requires a subscription
to the Uconnect Access Advantage package. (Some
devices will support pre-formatted responses, but not
free-form. Refer to UconnectPhone.com for further
details.)
4. Do I have to “train” my Uconnect radio to my voice?
FCA uses the latest voice recognition engine that provides good recognition without required training. This
makes it easier for a passenger to also use the system.
5. Can a passenger voice text? Yes, however, voice recognition microphones are optimized for the driver, so the
system may have difficulty hearing the passenger; also,
the system will use the currently connected device, so be
sure your passenger isn’t sending texts to the wrong
recipient.
6. Does Voice Texting work with accents? Speech isn’t
perfect. Technology isn’t perfect. While FCA strives to
use the latest voice recognition engine, the technology
may have difficulty with strong accents.
7. Can I voice text my car? The Voice Texting feature
allows you to listen to, and reply to text messages (SMS)
sent to your device by voice while in your vehicle.
8. How many pre-formatted replies are there? You can
respond with a set of up to 18 preset outgoing messages
such as ⬙I’ll call you later.” Refer to “Voice Texting”
section of this supplement.
9. Can I use abbreviations and emoticons? Of course! Just
say the name of the most popular emoticon or abbreviation, e.g. smiley, frown, wink, & LOL.
10. Can I use Text Messaging if the “messaging” button
doesn’t turn white? Only MAP compatible devices will
work with Text Messaging. If your device is compatible,
the “messaging” light will turn white, after the device is
Bluetooth connected, and you will then be able to do
hands free Text Messaging. The system will respond
with “Sorry, I didn’t understand you” if you push the
3
46 ALL ABOUT UCONNECT ACCESS
steering wheel “Phone” button and say a voice command for Text Messaging, when the button isn’t active
(“white”).
Uconnect Access App:
1. Download the Uconnect Access App to a compatible
device and login using your username and password.
Remote Door Lock/Unlock
Lock Or Unlock Your Vehicle From Virtually Anywhere
Using Your Computer Or Device App
Description
The Remote Door Lock/Unlock feature provides you the
ability to lock or unlock the door on your vehicle, without
the keys and from virtually any distance. You can send a
request to your vehicle in one of three ways:
• Using the Uconnect Access App from a compatible
device
• From
the
Mopar
Owner
(moparownerconnect.com)
How It Works
Connect
website
• Contacting Uconnect Care
If you want, you can set up notifications for your account
to receive an email or text (SMS) message every time a
command is sent to lock or unlock your doors.
2. To lock the doors, push the button with the closed lock
icon; to unlock the driver’s door push the button with
the open lock icon.
3. A pop-up screen will appear asking for your Uconnect
Security PIN (this is the same 4-digit code established
when your registered your Uconnect Access system).
Enter the Uconnect Security PIN on the keypad and
press “OK.”
4. The Uconnect Access App will confirm if your command was sent (or not). Press “OK” to close the pop-up
screen.
5. It will take a little while for the command to go through
to your vehicle. The time it takes depends on a number
of technical conditions.
6. A message will appear on the screen to let you know if
the command was received by your vehicle.
ALL ABOUT UCONNECT ACCESS 47
Mopar Owner Connect website:
1. Log on to the Mopar Owner Connect website
(moparownerconnect.com) using the username and
password you used when registering your Uconnect
Access system.
3
NOTE: If you forgot your username or password, links are
provided on the website to help you retrieve them.
2. If you have more than one vehicle registered into the
Mopar
Owner
Connect
website
(moparownerconnect.com), select the vehicle you want
to send the command by clicking on its image along the
top.
3. Beneath the image of a vehicle like yours, you will see a
row of icons. To lock the doors, click on the closed lock
icon; to unlock the driver’s door click on the “open lock
icon.”
4. You will then be asked to enter your Uconnect Security
PIN (this is the same 4-digit code established when your
registered your Uconnect Access system). Please enter
your Uconnect Security PIN.
5. A message will appear on the screen to let you know if
the command was received by your vehicle.
48 ALL ABOUT UCONNECT ACCESS
Uconnect Care:
1. If you need to unlock the doors of your vehicle, contact
Uconnect Care by calling:
855-792-4241
NOTE: The Uconnect Care agents are trained to help you
with unlocking of your door (for example, in an accidental
lock-out). All other Remote Services should be performed
via
the
Mopar
Owner
Connect
website
(moparownerconnect.com) or through the Uconnect Access App on your compatible device.
2. For security purposes, the Uconnect Care agent will
verify your identity by asking for your 4-digit Uconnect
Security PIN.
3. After providing your Uconnect Security PIN, you can
ask them to lock or unlock your vehicle. The agent will
send a command to your vehicle to get the task done.
Requirements
• Vehicle must be properly equipped with the Uconnect
Access System.
• Vehicle must have an operable 1X (voice/data) or 3G
(data) network connection.
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
• If using the Uconnect Access App to command your
vehicle, your device must be compatible and be connected to an operable 1X (voice/data) or 3G (data)
network connection.
• An ignition cycle is required for some remote commands
such as Remote Vehicle Start and Remote Door Lock/
Unlock if following a Remote Horn and Lights
activation.
FAQs
1. How long does it take to unlock or lock the door?
Depending on various conditions, it can take 1–2 minutes or more for the request to get through to your
vehicle, although Uconnect is always striving to improve performance.
2. Which is faster, my Key Fob or the Uconnect Access
App? Your Key Fob will lock/unlock the door quicker,
however its range is limited and it can sometimes get
misplaced or locked in the vehicle. Your Uconnect
Access App comes in handy for these and other situations.
ALL ABOUT UCONNECT ACCESS 49
3. Will my vehicle be safe if I lose my device? People
sometimes lose their devices, which is why security
measures have been engineered into the Uconnect Access App. Asking for your username, password and
Uconnect Security PIN help to ensure that nobody can
get into your vehicle if they happen to find your device.
Remote Vehicle Start
4. Why can’t all devices use the Uconnect Access App?
The Uconnect Access App has been designed to work on
most devices with the Apple and Android operating
systems. The capabilities of these devices allows us to
remotely command your vehicle. Other operating systems may be supported in the future.
The Remote Vehicle Start feature provides you with the
ability to start the engine on your vehicle, without the keys
and from virtually any distance. Once started, the pre-set
climate controls in your vehicle can warm-up or cool-down
the interior before you have to get in. You can send a
request to your vehicle in one of two ways:
5. Why is the Uconnect Access App running slow? The
Uconnect Access App relies on a mobile network connection from your device to send commands to your
vehicle which must have an operable 1X (voice/data) or
3G (data) network connection. If either your device or
your vehicle are in an area with below average coverage,
it may take longer to log in and send commands.
Use Your Computer Or Wireless Device App To Start The
Engine And Warm-Up Or Cool-Down The Vehicle From
Almost Anywhere
Description
3
• Using the Uconnect Access App from a compatible
device.
• From
the
Mopar
Owner
(moparownerconnect.com).
Connect
website
You can also send a command to turn-off an engine that
has been remote started. After 15 minutes if you have not
entered your vehicle with the key, the engine will shut off
automatically.
This remote function requires your vehicle to be equipped
with a factory-installed Remote Start system.
50 ALL ABOUT UCONNECT ACCESS
If you want, you can set-up notifications for your account
to receive an email or text (SMS) message every time a
command is sent to remote start or cancel a remote start.
How It Works
Uconnect Access App:
1. Download the Uconnect Access App to a compatible
device and login using your username and password.
2. To start the engine, press the “circular arrow”, to turnoff an engine that has been remote started press the
“cancel” button.
3. A pop-up screen will appear asking for your Uconnect
Security PIN (this is the same 4-digit code established
when your registered your Uconnect Access system).
Enter the Uconnect Security PIN on the keypad and
press “OK.”
4. The Uconnect Access App will confirm if your command was sent (or not). Press “OK” to close the pop-up
screen.
5. It will take a little while for the command to go through
to your vehicle. The time it takes depends on a number
of technical conditions.
6. A message will appear on the screen to let you know if
the command was received by your vehicle.
Mopar Owner Connect website:
1. Log on to the Mopar Owner Connect website
(moparownerconnect.com) using the username and
password you used when registering your Uconnect
Access system.
NOTE: If you forgot your username or password, links are
provided on the website to help you retrieve them.
2. If you have more than one vehicle registered into the
Mopar
Owner
Connect
website
(moparownerconnect.com), select the vehicle you want
to send the command by clicking on its image along the
top.
3. Beneath the image of a vehicle like yours, you will see a
row of icons. To start the engine, press the “circular
arrow”, to turn-off an engine that has been remote
started press the “cancel” button.
4. You will then be asked to enter your Uconnect Security
PIN (this is the same 4-digit code established when your
registered your Uconnect Access system). Please enter
your Uconnect Security PIN.
ALL ABOUT UCONNECT ACCESS 51
5. A message will appear on the screen to let you know if
the command was received by your vehicle.
Uconnect Care:
1. If you need to unlock the doors of your vehicle, contact
Uconnect Care by calling:
855-792-4241
NOTE: The Uconnect Care Agents are trained to help you
with unlocking of your door (for example, in an accidental
lock-out). All other Remote Services should be performed
via
the
Mopar
Owner
Connect
website
(moparownerconnect.com) or through the Uconnect Access App on your compatible device.
2. For security purposes, the Uconnect Care Agent will
verify your identity by asking for your 4-digit Uconnect
Security PIN.
3. After providing your Uconnect Security PIN, you can
ask them to lock or unlock your vehicle. The agent will
send a command to your vehicle to get the task done.
FAQs
1. How long does it take to remote start my vehicle?
Depending on various conditions, it can take three
minutes or more for the request to get through to your
vehicle, although Uconnect is always striving to improve performance.
2. Which is faster, my Key Fob or the Uconnect Access
App? Your Key Fob will remote start your vehicle
quicker, however its range is limited. For example, when
you are leaving the stadium after the game, you can
remote start your vehicle to have the inside comfortable
before you even get there.
3. Will my vehicle be safe if I lose my wireless device?
People sometimes lose their wireless devices, which is
why security measures have been engineered into the
Uconnect Access App. Asking for your username, password and Uconnect Security PIN help to ensure that
nobody can start your vehicle if they happen to find
your device.
3
52 ALL ABOUT UCONNECT ACCESS
4. Can someone drive off with my vehicle using the
App? No. Driving your vehicle still requires the keys to
be in the vehicle. The Remote Start feature simply starts
the engine to warm-up or cool down the interior before
you arrive, you cannot drive away without the keys.
help if you need to draw attention to your vehicle for any
reason. You can send a request to your vehicle in one of
three ways:
5. Can I stop a vehicle that is being driven by canceling
the engine start command? No. If a vehicle is driving
down the road the cancel Remote Start button will not
stop it. It simply cancels or ends a Remote Start of the
engine.
• From
the
Mopar
Owner
(moparownerconnect.com).
6. Why can’t all devices use the Uconnect Access App?
The Uconnect Access App has been designed to work on
most devices with the Apple and Android operating
systems. The capabilities of these device allows us to
remotely command your vehicle. Other operating systems may be supported in the future.
Remote Horn And Lights
Can’t Find Your Vehicle In The Parking Lot? Sound The
Horn And Flash The Lights On Your Vehicle To Locate It
Description
It is easy to locate a vehicle in a dark, crowded or noisy
parking area by activating the horn and lights. It may also
• Using the Uconnect Access App from a compatible
device.
Connect
website
• Contacting Uconnect Care.
If you want, you can set-up notifications for your account
to receive an email or text (SMS) message every time a
command is sent to turn on the horn and lights.
How It Works
1. Download the Uconnect Access App to a compatible
device and login using your username and password.
2. To turn on the horn and lights, press the “trumpet icon.”
To turn-off the horn and lights, press the “trumpet icon”
again.
3. A pop-up screen will appear asking for your Uconnect
Security PIN (this is the same 4- digit code established
when you registered your Uconnect Access system).
Enter the Uconnect Security PIN on the keypad and
press “OK.”
ALL ABOUT UCONNECT ACCESS 53
4. The Uconnect Access App will confirm if your command was sent (or not). Press “OK” to close the pop-up
screen.
5. It will take a little while for the command to go through
to your vehicle. The time it takes depends on a number
of technical conditions.
6. A message will appear on the screen to let you know if
the command was received by your vehicle.
Mopar Owner Connect website:
1. Log on to the Mopar Owner Connect website
(moparownerconnect.com) using the username and
password you used when registering your Uconnect
Access system.
• If you forgot your username or password, links are
provided on the website to help you retrieve them.
2. If you have more than one vehicle registered into the
Mopar
Owner
Connect
website
(moparownerconnect.com), select the vehicle you want
to send the command by clicking on its image along the
top.
3. Beneath the image of a vehicle like yours, you will see a
row of icons. To turn on the horn and lights, press the
“trumpet icon.” To turn off the horn and lights, press the
“trumpet icon” again.
NOTE: A quicker way to turn off your Remote Horn and
Lights would be to push the “Panic” button on your Key
Fob if you are near the vehicle.
4. You will then be asked to enter your Uconnect Security
PIN (this is the same 4-digit code established when you
registered your Uconnect Access system). Please enter
your Uconnect Security PIN.
5. A message will appear on the screen to let you know if
the command was received by your vehicle.
Uconnect Care:
1. If you need to unlock the doors of your vehicle, contact
Uconnect Care by calling:
855-792-4241
3
54 ALL ABOUT UCONNECT ACCESS
NOTE: The Uconnect Care agents are trained to help you
with unlocking of your door (for example, in an accidental
lock-out). All other Remote Services should be performed
via
the
Mopar
Owner
Connect
website
(moparownerconnect.com) or through the Uconnect Access App on your compatible device.
2. For security purposes, the Uconnect Care agent will
verify your identity by asking for your 4-digit Uconnect
Security PIN.
3. After providing your Uconnect Security PIN, you can
ask them to lock or unlock your vehicle. The agent will
send a command to your vehicle to get the task done.
NOTE: The Remote Horn and Lights feature is designed to
be loud and get noticed. Please keep in mind the surroundings when using this feature.
FAQs
1. How long does it take to sound my horn and flash the
lights? Depending on various conditions, it can take
three minutes or more for the request to get through to
your vehicle, although Uconnect is always striving to
improve performance.
2. Which is faster, my Key Fob or the Uconnect Access
App? Your Key Fob will sound the horn and flash the
lights quicker; however its range is limited.
3. Will my vehicle be safe if I lose my wireless device?
People sometimes lose their device, which is why security measures have been engineered into the Uconnect
Access App. Asking for your username, password and
Uconnect Security PIN help to ensure that nobody can
access your vehicle if they happen to find your device.
4. How do I turn off the horn and lights after I turn them
on? By pressing the “horn icon” a second time on your
Uconnect Access App, a second command will be sent to
shutoff the horn and lights. Alternatively, if you are
close enough to the vehicle you can use the Key Fob to
turn off the horn and lights by pressing the red “Panic”
button.
5. Why can’t all devices use the Uconnect Access App?
The Uconnect Access App has been designed to work on
most devices with the Apple and Android operating
systems. The capabilities of these device allows us to
remotely command your vehicle. Other operating systems may be supported in the future.
ALL ABOUT UCONNECT ACCESS 55
Vehicle Health Alert
Your vehicle will send you an email alert if it senses a
problem under the hood with one of your vehicles key
systems. For further information go to the Mopar Owner
Connect website moparownerconnect.com.
Via Mobile Apps — If Equipped
Pandora — If Equipped
Pandora gives people the music and comedy they love
anytime, anywhere. Personalized stations launch instantly,
with the input of a favorite artist, track, comedian, or
genre.
Description
Easily control your Pandora App through an intuitive
interface via the vehicle touchscreen and steering wheel
controls.
• Reduce the need to use your device to access Pandora so
you can stay focused on driving.
• Launch Pandora using Voice Recognition (VR) via a
button on the steering wheel.
• Pandora offers personalized radio based on your favorite artists, or songs and can create a custom ⬙station⬙
playing similar music. Custom stations are created on
the Pandora website or the mobile App.
• Listen to previously created stations in “shuffle” mode.
• For the best music experience, continuously personalize
your music using the “Like” or “Dislike” buttons on the
touchscreen whenever a particular song is played that
you want to hear more or less of.
• Enjoy a higher quality of music by adjusting the Pandora
settings.
• Customers can leverage an existing Pandora account, or
set up a new account on the Pandora website at
pandora.com.
• Customers can also create a new Pandora account by
clicking on a link from the Uconnect Access Via Mobile
profile page during registration and setup.
Ensure that Via Mobile data has been turned on under
“Settings” in the Uconnect Access App.
Each time you want to use a Via Mobile App in your
vehicle, the Uconnect Access App must be running on your
device and the device must be paired via Bluetooth.
3
56 ALL ABOUT UCONNECT ACCESS
A message will be displayed to remind you that Via Mobile
Apps utilize the data plan on your connected device to
provide content. Press “OK” to continue or the “X” to exit.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
NOTE: Many devices have a limit to how much data they
can utilize before incurring additional charges. The amount
of data being used varies by device, service provider and
specific App. Check your device service plan for more
details.
• Vehicle must be equipped with Uconnect 8.4/8.4 NAV.
Requirements
• Vehicle must be properly equipped with the Uconnect
Access System.
• Your device must be compatible with the Uconnect
Access App and properly connected to the vehicle.
• To perform updates to this application, if required, your
vehicle must be connected to an operable 1X (voice/
data) or 3G (data) network.
• Your device must be connected to a mobile network.
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
FAQs
1. Why can’t I get Pandora Via Mobile to work? Here are
some things to consider:
• Check to ensure you have linked your Pandora account credentials with Uconnect Access. This is usually done during registration and setup. Then, check to
ensure you have properly connected your compatible
device to the vehicle touchscreen. The Uconnect Access App must be open and you must be logged in. A
blue light indicates that it’s providing data to the
vehicle.
• If you recently changed your password for Pandora, it
may need to be updated on Mopar Owner Connect
under the “Via Mobile” section.
2. If I changed my password for Pandora, do I have to
update it with Uconnect Access? Yes. Visit
moparownerconnect.com, log in, and click on Via
Mobile.
ALL ABOUT UCONNECT ACCESS 57
3. How do I set up a Pandora account? You can create an
account with Pandora by visiting pandora.com. To
make changes to an existing Pandora account, visit the
Pandora website.
4. Can I create a Pandora account during Uconnect Access registration and setup? There is a link from the Via
Mobile profile page where the customer can go to the
Pandora website to create a new account.
5. Can I customize my Pandora stations? The “Thumbs
up” and “Thumbs down” buttons on the touchscreen
are used to personalize stations based on the currently
playing track. Give a track the “thumbs up” to hear
more tracks with similar qualities, or “thumbs down” to
remove that track from the station and avoid tracks with
similar qualities.
6. Can I create a station from within the vehicle using the
vehicle touchscreen? Custom content can only be created from the Pandora website or the Pandora mobile
App.
7. How do I improve the sound quality within the App
and how will this affect the experience? The default
setting is 32 kbps. Users can increase to 64 kbps by
selecting “Pandora Settings” once within the App (icon
looks like two gears). This will double the impact to the
user’s data plan and is subject to more playbacks/
buffering.
8. How do I block explicit content? Customers have the
ability to block explicit content by adjusting their settings through the Pandora website at pandora.com or
through the Pandora mobile App.
9. Should I have the Pandora App downloaded to my
device to use Pandora Via Mobile? You do not need to
have the Pandora App on your device to use Pandora
Via Mobile. The Uconnect Access App is required,
however.
10. How do I know how much data is being used?
Uconnect Access Via Mobile uses your device’s existing
data plan to stream content. Data usage varies by
phone/device, content (e.g. videos), high quality audio
and several other factors. Please refer to your device
carrier for specific details.
3
58 ALL ABOUT UCONNECT ACCESS
iHeartRadio — If Equipped
iHeartRadio provides instant access to more than 1,500 live
radio stations from across the country and allows listeners
to create custom music stations inspired by their favorite
artists or songs.
Description
• Easily control your iHeartRadio App through an intuitive interface via the touchscreen and steering wheel
controls.
• Reduce the need to use your device to access
iHeartRadio so you can stay focused on driving.
• Leverage an existing iHeartRadio account, or set up a
free account at iHeartRadio.com.
• Customers can also create a new iHeartRadio account by
clicking on a link from the Uconnect Access Via Mobile
profile page during registration and set-up.
• Launch iHeartRadio using Voice Recognition (VR) or
through touchscreen controls.
• Browse, listen, and save radio stations for easy access.
• Browse and create custom stations (e.g. Zac Brown
Band).
• Create a new custom station based on what’s currently
playing with a single button press.
• Steering wheel controls supported for preset jump and
“next track” (until reaching maximum skips).
• Listen to live radio stations from across the U.S.
• Continually refine stations to your liking using the
“Thumbs Up” and “Thumbs Down” buttons.
Ensure that Via Mobile data has been turned on under
“Settings” in the Uconnect Access App.
Each time you want to use a Via Mobile App in your
vehicle, the Uconnect Access App must be running on your
device and the device must be paired via Bluetooth.
A message will be displayed to remind you that Via Mobile
Apps utilize the data plan on your connected device to
provide content. Press “OK” to continue or the “X” to exit.
NOTE: Many devices have a limit to how much data they
can utilize before incurring additional charges. The amount
of data being used varies by device, service provider and
specific App. Check your device service plan for more
details.
ALL ABOUT UCONNECT ACCESS 59
Requirements
• Vehicle must be properly equipped with the Uconnect
Access System.
• Your device must be compatible with the Uconnect
Access App and properly connected to the vehicle.
• To perform updates to this application, if required, your
vehicle must be connected to an operable 1X (voice/
data) or 3G (data) network.
• Your device must be connected to a mobile network.
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
• Vehicle must be equipped with Uconnect 8.4/8.4 NAV.
Tips and Shortcuts
• Continually refine stations to your liking using the
“Thumbs Up” or “Thumbs Down” buttons.
• Press the “HOLD to Set” button on the top of the screen
for three seconds to add current station as a preset. Set
up to 10 presets.
NOTE: Presets must be set from the music player screen.
• Use the “Discovery Tuner” button on the touchscreen to
change the variety of the station you are listening to. Set
the tuner to “Familiar,” “Mixed,” and “Less Familiar”
– Familiar — The most popular songs for this station.
– Mixed — Additional artists and songs, for increased
variety.
– Less Familiar — The widest variety of music, for the
most discovery.
FAQs
1. Why can’t I get iHeartRadio Via Mobile to work? Here
are some things to consider:
• Check to ensure you have linked your iHeartRadio
account credentials with Uconnect Access. This is
usually done during registration and setup. Then,
check to ensure you have properly connected your
compatible device to the radio. The Uconnect Access
App must be open and you must be logged in. A blue
light indicates that it’s providing data to the vehicle.
3
60 ALL ABOUT UCONNECT ACCESS
• If you recently changed your password for
iHeartRadio, it may need to be updated on Mopar
Owner Connect under the “Via Mobile” section.
6. How do I set up an iHeartRadio account? You can
create or make changes to an existing iHeartRadio
account by visiting their website at iHeartRadio.com.
2. How do I personalize the music played on my custom
station? Press the “thumbs up” icon when music is
played that you like, and the “thumbs down” icon when
music is played that you do not like. Future music
played will give you more of the music with characteristics that meet your preferences. The more often you
use Thumb Up and Thumbs Down, the better your
station becomes.
7. Can I create custom content from within the vehicle?
Yes. From the iHeartRadio Home screen, press “Create
Station.”
3. How do I know when iHeartRadio is playing one of
the songs I indicated I “liked”? The Thumbs Up button
on the radio touchscreen will appear in red when
playing a song you previously liked.
4. If I changed my password for iHeartRadio, do I have
to update it with Uconnect Access? Yes. Visit Mopar
Owner Connect moparownerconnect.com, log in, and
click on Via Mobile.
5. Can I create an iHeartRadio account during Uconnect
Access registration and set-up? There is a link from the
Via Mobile profile page where the customer can go to
iHeartRadio’s website to create a new account.
8. Should I have the iHeartRadio App downloaded to my
device to use Uconnect Access Via Mobile? You do not
need to have the iHeartRadio App on your device in
order to use iHeartRadio Via Mobile. The Uconnect
Access App is required, however.
9. How do I know how much data is being used?
Uconnect Access Via Mobile uses your device’s existing
data plan to stream content. Data usage varies by
phone/device, content (e.g. videos), high quality audio
and several other factors. Please refer to your device
carrier for specific details.
10. How do I block explicit content? Customers have the
ability to block explicit content within the iHeartRadio
Settings menu. Go to iHeartRadio Home and select the
“gear” icon.
ALL ABOUT UCONNECT ACCESS 61
Slacker Radio — If Equipped
Enjoy millions of songs and hundreds of handcrafted
stations.
Description
• Easily control your Slacker Radio App through an
intuitive interface via the vehicle touchscreen and steering wheels controls.
Recently Played and stations you’ve previously created
at My Station (browse and listen to previously created
playlists for premium account only).
• Listen to customized stations based on your favorite
artists and music.
• Continually refine stations to your liking using the
“Heart,” “Ban Artist” or “Ban Song” controls.
• Reduce the need to use your device to access Slacker
Radio so you can stay focused on driving.
Ensure that Via Mobile data has been turned on under
“Settings” in the Uconnect Access App.
• Launch Slacker Radio using Voice Recognition (VR) or
through touchscreen controls.
Each time you want to use a Via Mobile App in your
vehicle, the Uconnect Access App must be running on your
device and the device must be paired via Bluetooth.
• Leverage existing Slacker Radio account. Customer can
set up a free or paid account on the Slacker Radio
website at slacker.com.
• Customers can also create a new Slacker Radio account
from the Uconnect Access Via Mobile profile page
during registration and setup.
• Browse and listen to stations by selecting from hundreds
of expert-programmed stations or tune into entertainment, sports and news stations. You can also access
A message will be displayed to remind you that Via Mobile
Apps utilize the data plan on your connected device to
provide content. Press “OK” to continue or the “X” to exit.
NOTE: Many devices have a limit to how much data they
can utilize before incurring additional charges. The amount
of data being used varies by device, service provider and
specific App. Check your device service plan for more
details.
Your chosen station will play. Use the “Heart” and “Ban”
buttons on the touchscreen to quickly and easily customize
3
62 ALL ABOUT UCONNECT ACCESS
your experience. Like a song? Heart it to hear it more often.
Dislike a song? Ban it and the song or artist will be
removed from your station. Slacker Radio makes it easy
and personal.
Requirements
• Vehicle must be properly equipped with the Uconnect
Access System.
• Your device must be compatible with the Uconnect
Access App and properly connected to the vehicle.
• To perform updates to this application, if required, your
vehicle must be connected to an operable 1X (voice/
data) or 3G (data) network.
• Your device must be connected to a mobile network.
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
• Vehicle must be equipped with Uconnect 8.4/8.4 NAV.
FAQs
1. Why can’t I get Slacker Radio Via Mobile to work?
Here are some things to consider:
• Check to ensure you have linked your Slacker Radio
account credentials with Uconnect Access. This is
usually done during registration and setup. Then,
check to ensure you have properly connected your
compatible device to the vehicle touchscreen. The
Uconnect Access App must be open and you must be
logged in. A blue light indicates that it’s providing
data to the vehicle.
• If you recently changed your password for Slacker
Radio, it may need to be updated on Mopar Owner
Connect under the “Via Mobile” section.
2. How do I customize the music being played on the
station? As you listen to music, use the button on the
touchscreen to confirm your preference to the music
currently being played. Press the “like” icon to confirm
what you want to hear more of, and the “dislike” icon to
eliminate what you do not want to hear.
ALL ABOUT UCONNECT ACCESS 63
3. How do I know when Slacker Radio is playing one of
the songs I indicated I “liked”? The heart button on the
touchscreen will appear in yellow when playing a song
you previously liked. When you see it appear in yellow,
you do not need to “like” it again, and you know that
Slacker Radio is playing your preferences.
4. Can I ban a particular artist from playing in Slacker
Radio? Yes, Slacker Radio gives you the capability to
ban all songs from a particular artist or song by using
the “dislike” button on the touchscreen.
5. Can I create a Slacker Radio account during Uconnect
Access registration and set-up? There is a link from the
Via Mobile profile page where the customer can go to
Slacker Radio’s website to create a new account.
6. How do I set up a Slacker Radio account? You can
create an account with Slacker Radio by visiting their
website at slacker.com. To make changes to an existing
Slacker Radio account, visit Slacker Radio’s website.
7. Can I create custom content from within the vehicle?
To create a custom station, visit Slacker Radio’s website
at slacker.com or the Slacker Radio mobile App. Custom content cannot be created from within the vehicle.
8. Should I have the Slacker Radio App downloaded to
my device to use Uconnect Access Via Mobile? You do
not need to have the Slacker Radio App on your device
to use Slacker Radio Via Mobile. However, the Uconnect
Access App is required.
9. How do I know how much data is being used?
Uconnect Access Via Mobile uses your device’s existing
data plan to stream content. Data usage varies by
phone/device, content (e.g. videos), high quality audio
and several other factors. Please refer to your device
carrier for specific details.
Aha by HARMAN — If Equipped
Aha makes it easy to instantly access your favorite Web
content on the go. Choose from over 40,000+ stations
spanning internet radio, personalized music, news, entertainment, hotels, weather, audiobooks, Facebook, Twitter,
and more.
Description
Aha lets you easily access and organize your favorite web
content on your device, then seamlessly integrates the
experience with your vehicle.
• Listen to audio updates from Facebook or Twitter (Vehicle must be registered with Uconnect Access).
3
64 ALL ABOUT UCONNECT ACCESS
• Organize your favorite content from the web into personalized on-demand radio stations.
• Aha gives customers the flexibility to create up to
30 pre-set stations from within the vehicle, on the Aha
website (aharadio.com), or through the Aha mobile
App.
• “Like” and “Dislike” buttons on the touchscreen are
available to refine songs being played on the station.
• Ability to perform location-based local searches (e.g.
“Hungry” and “Coffee”) and route to a point of interest
by sending the address to the navigation system (if nav
equipped).
• Real-time traffic reports and audio books (read aloud).
• Access your favorite podcasts, internet radio, ondemand music, traffic reports and restaurant
recommendations.
• News, sports, talk, social, comedy and special interest
podcasts.
Ensure that Via Mobile data has been turned on under
“Settings” in the Uconnect Access App.
Each time you want to use a Via Mobile App in your
vehicle, the Uconnect Access App must be running on your
device and the device must be paired via Bluetooth.
A message will be displayed to remind you that Via Mobile
Apps utilize the data plan on your connected device to
provide content. Touch “OK” to continue or the “X” to exit.
NOTE: Many devices have a limit to how much data they
can utilize before incurring additional charges. The amount
of data being used varies by device, service provider and
specific App. Check your device service plan for more
details.
You can associate your Aha account with your personal
Facebook, Twitter and Slacker accounts. If you have the
Aha App downloaded to your device visit the Aha settings
screen and look for “Associate Accounts.” You can also
associate your Aha account from aharadio.com.
Requirements
• Vehicle must be properly equipped with the Uconnect
Access System.
• Your device must be compatible with the Uconnect
Access App and properly connected to the vehicle.
ALL ABOUT UCONNECT ACCESS 65
• To perform updates to this application, if required, your
vehicle must be connected to an operable 1X (voice/
data) or 3G (data) network.
• Your device must be connected to a mobile network.
• Vehicle must be registered with Uconnect Access and
have an active subscription that includes the applicable
feature or App.
• Vehicle must be powered in the ON/RUN or ACC
(Accessory) position with a properly functioning electrical system.
• Vehicle must be equipped with Uconnect 8.4/8.4 NAV.
FAQs
1. Why can’t I get Aha Via Mobile to work? Here are
some things to consider:
• Check to ensure you have linked your Aha account
credentials with Uconnect Access. This is usually done
during registration and setup. Then, check to ensure
you have properly connected your compatible device
to the vehicle touchscreen. The Uconnect Access App
must be open and you must be logged in. A blue light
indicates that it’s providing data to the vehicle.
• If you recently changed your password for Aha, it may
need to be updated on Mopar Owner Connect under
the “Via Mobile” section.
2. How does Aha help refine my music options? It
organizes your favorite content into personalized ondemand radio stations. You can access podcasts, internet
radio, personalized traffic reports and even restaurant
recommendations. It will assemble content for you
based on your use of the “like” and “dislike” buttons on
the touchscreen.
3. Where does the search function search from? The
search function will provide results based on the location of your vehicle. As you drive, the search results will
change to reflect your vehicle’s current location.
4. How do I sync my Aha account with Facebook, Twitter
and Slacker? Associate your Aha account with
Facebook, Twitter and Slacker services at aharadio.com,
or from the Aha device App. From the Aha device App,
visit the Aha settings screen and look for “Associate
Accounts.”
3
66 ALL ABOUT UCONNECT ACCESS
5. If I enter personalized preferences on the web, will it
also save my setting when I am in the vehicle? Yes,
your personalized selections are saved to a common
area, so they will be reflected wherever you access Aha
in the vehicle on the vehicle touchscreen, device or the
Aha website aharadio.com.
6. Why can’t I get Aha Via Mobile to work? Ensure you
have registered for Uconnect Access and associated
your Aha account credentials with Uconnect Access.
This is done during registration and setup process.
Then, ensure you have properly connected your compatible device to the vehicle touchscreen. The Uconnect
Access App must be open. A blue light indicates that it’s
providing data to the vehicle.
7. If I changed my password for Aha, do I have to
update it with Uconnect Access? Yes. Visit
moparownerconnect.com, log in, and click on Via
Mobile.
8. How do I set up an Aha account? You can create an
account with Aha by visiting aharadio.com. To make
changes to an existing Aha account, visit the Aha
website.
9. Can I create an Aha account during Uconnect Access
registration and setup? There is a link from the Via
Mobile profile page where the customer can go to the
Aha website to create a new account.
10. How do I block explicit content? By default Aha
automatically filters and blocks explicit content for
you. If you would like to enable the ability to listen to
explicit podcasts, as well as comedy or user-generated
shouts, you must visit the “Settings” screen and switch
the “Allow Explicit Content” setting to ON.
11. Should I have the Aha App downloaded to my device
to use Aha Via Mobile? You do not need to have the
Aha App on your device to use Aha Via Mobile. The
Uconnect Access App is required.
12. How do I know how much data is being used?
Uconnect Access Via Mobile uses your device’s existing
data plan to stream content. Data usage varies by
phone/device, content (e.g. videos), high quality audio
and several other factors. Please refer to your device
carrier for specific details.
ALL ABOUT UCONNECT ACCESS 67
MAINTAIN MY UCONNECT ACCESS ACCOUNT
How To Remove My Uconnect Access Account
To remove your Uconnect Access account or cancel your
Uconnect Access subscription go to the Mopar Owner
Connect website (moparownerconnect.com). On Mopar
Owner Connect, go to Uconnect Store, and click on “Remove My Vehicle.”
For further assistance call Uconnect Care at:
855-792-4241
Adding Vehicles To My Uconnect Access Account
You can easily add vehicles to your Uconnect Access
account online by going to the Mopar Owner Connect
website (moparownerconnect.com) > Dashboard > Add a
Vehicle. Connected vehicles must follow the secure registration process to be added to an account.
UCONNECT CARE AND FAQs
Uconnect Care Business Hours:
For additional information about Uconnect Access, push
the ASSIST button on the rear view mirror and then select
Uconnect Care on your in-vehicle touchscreen to contact
Uconnect Care. Your call will be directed to a Uconnect
Care agent or held in a queue until an agent is available or
go
to
the
Mopar
Owner
Connect
website
(moparownerconnect.com).
You can also phone Uconnect Care directly at:
1-855-792-4241
Central Time
• Monday through Friday – 7:00 am to 7:00 pm
• Saturday and Sunday – 8:00 am to 4:00 pm
1. How Do I Register For My Uconnect Access Account?
Press the “Apps” button on the in-vehicle touchscreen,
then select Uconnect Registration.
2. Why Do I Need An Email Address? Without an email
address, customers cannot register for Uconnect Access.
Customers need to register so they can subscribe to
receive additional services and create a Uconnect Security PIN for remote command requests.
3
68 ALL ABOUT UCONNECT ACCESS
3. How Do I Create A Uconnect Security PIN? Set up
your Uconnect Security PIN during the registration
process. The Uconnect Security PIN will be required to
authenticate you when accessing your account via
Uconnect Care or performing any remote services such
as Remote Door Lock/Unlock, Remote Horn & Lights,
or Remote Vehicle Start.
4. What If I Forgot My Uconnect Security PIN? If you’ve
already registered and forgot your Uconnect Security
PIN, you can reset the pin by selecting Edit Profile on
the
Mopar
Owner
Connect
website
moparownerconnect.com.
You can also call Uconnect Care at:
1-855-792-4241
5. How Do I Create A Uconnect Payment PIN? Log into
the
Mopar
Owner
Connect
website
moparownerconnect.com with your username and
password. Select Edit Profile > Uconnect Payment Account to create an account (and PIN) (if you have a
Uconnect Access equipped vehicle).
6. What Is A Uconnect Payment PIN? A Uconnect Payment PIN is a unique 4-digit code that you create to gain
access to your payment information – your credit cards,
billing address, payment history and more. It is required
in order to purchase Uconnect Access packages and
Apps.
7. What If I Forgot My Uconnect Payment PIN? The next
time you are asked for your Uconnect Payment PIN,
select “Forgot PIN?” and follow the steps to reset it.
8. How Do I Update My Uconnect Payment Account
Address? Your Uconnect Payment Account address
must be updated online only: Login to the Mopar
Owner Connect website moparownerconnect.com, and
select Edit Profile > Uconnect Payment Account.
9. How Do I Update My Uconnect Profile? Your
name, home address, phone number, email address
and Uconnect Security PIN can be updated online
on
the
Mopar
Owner
Connect
website
moparownerconnect.com.
a. Log in to the Mopar Owner Connect website
moparownerconnect.com then select Edit Profile to
edit your personal information.
b. Make your edits and click “Save.”
ALL ABOUT UCONNECT ACCESS 69
10. Can I Try Apps, Features Or Packages Before I Buy
Them? Your new vehicle purchase may have come
with an included trial period for certain Apps and
services.
For more information please contact Uconnect Care at:
1-855-792-4241
11. Can I Access Every App And Service While Driving?
No, some applications and services are not available
while driving. For your own safety, it is not possible to
use some of the touchscreen features while the vehicle
is in motion (e.g. key pad).
12. Can I Access The Uconnect Store While I Am Driving? No, some applications and services are not available while driving. Only use Uconnect applications
and services when the vehicle is parked in a safe
location.
13. How Do I Know When A New App, Feature Or
Package Is Offered? Go to Uconnect Store to check for
updated features, packages and Apps.
14. Will I Be Notified When My Subscription Is Expired
Or Will It Automatically Renew? There is no autorenewal feature currently offered. You can find the
expiration dates for all of your App and package
subscriptions from your in-vehicle touchscreen, select
Apps > Uconnect Store > My Apps.
15. How Do I Manage My Notification Preferences? Go
to Edit Profile > Uconnect Notifications on the Mopar
Owner Connect website moparownerconnect.com.
16. Do I Receive A Purchase Confirmation? Yes. You will
receive a purchase confirmation email any time you
renew your Uconnect Access subscription or purchase
WiFi Hotspot service.
17. How Do I Purchase A Subscription Or 3G Wi-Fi
Hotspot? From your in-vehicle touchscreen:
a. Select Apps > Uconnect Store.
b. Choose a package or service.
c. Follow the steps to enter your Uconnect Payment PIN
and complete the process.
You can also go to the Uconnect Store online at
Mopar Owner Connect moparownerconnect.com,
select the Shop tab, then Uconnect Store.
3
70 ALL ABOUT UCONNECT ACCESS
For additional support please contact Uconnect
Care at:
1-855-792-4241
18. How Do I Update My Credit Card Information?
Login to the Mopar Owner Connect website
moparownerconnect.com, and select Edit Profile, then
select Uconnect Payment Account.
19. How Do I Find Out How Much Longer I Have On My
Subscription? From your vehicle touchscreen > select
Apps > Uconnect Store > My Apps and choose a
subscription to view its expiration date. When your
subscription is about to expire you will receive an
email notification.
20. Which Apps Are Included With My Vehicle? Go to
Uconnect Store > My Apps to see Apps currently
available on your vehicle.
21. If I Delete/Remove A Package From My Screen, Does
It Cancel My Subscription? Yes, this removes the
subscription of the selected package.
22. Can I Get A Refund If I Have Not Used The Entire
Subscription? No.
23. Can I Cancel A Subscription Before It Expires? Yes,
but your subscription will still be active until the
expiration date. If you subscribe to another package,
the new subscription will start immediately.
24. Do I Have To Keep My Vehicle On During The App
Download Process? Yes.
25. How Do I Re-Initiate A Download App If There Was
An Error? If you’re having issues with an App you can
reinstall it. This returns the App to its original state
which usually fixes the problem. This does not affect
your Uconnect subscriptions or account information.
To reinstall an App from the in-vehicle touchscreen,
press Apps > Uconnect Store > My Apps > Settings >
Reinstall Apps > Continue.
26. What Should I Do If I Want To Sell My Vehicle?
Before your vehicle is sold to a new owner, you’ll want
to remove your account information. This process
removes all personal information and returns the
Uconnect system to its original factory settings.
To remove your account information from the
Uconnect system contact Uconnect Care at:
1-855-792-4241
ALL ABOUT UCONNECT ACCESS 71
27. What If I Forgot To Remove My Account Information
Before I Returned My Lease Vehicle Or Sold It? Don’t
worry – your information is secure.
Contact Uconnect Care at:
1-855-792-4241
28. I Am Trading My Vehicle In. Can I Transfer Apps To
My New Vehicle If I Have An Active Subscription?
No.
29. What will happen if there is not an operable 1X
(voice/data) or 3G (data) network connection? The
9-1-1 and ASSIST buttons will NOT function if you are
not connected to an operable 1X (voice/data) or 3G
(data) network. Other Uconnect services will only be
operable if your Uconnect Access service is active and
you are connected to an operable 1X (voice/data) or 3G
(data) network.
30. How will I know if my vehicle is not connected to an
operable 1X (voice/data) or 3G (data) network? The
signal strength bars on the “Apps ” button on the
touchscreen will show a single bar and a prohibition
to indicate your vehicle is not connected
symbol
to an operable 1X (voice/data) or 3G (data) network.
Privacy Practices
For more information on how FCA US LLC and Sprint may
use your information, please see the Uconnect privacy
policy at driveuconnect.com/privacy/ and the FCA US
LLC privacy statement at chrysler.com/universal/
privacy.html.
Safety Guidelines
WARNING!
ALWAYS obey traffic laws and pay attention to the
road. Some Uconnect Access services, including 9-1-1
and Assist, will NOT work without an operable
1X(voice/data) or 3G(data) network connection.
NOTE: Your vehicle may be transmitting data as authorized by the subscriber.
Ensure that all persons read this manual carefully before
using the radio system. It contains instructions on how to
use the system in a safe and effective manner.
• Glance at the screen only when safe to do so. If prolonged viewing of the screen is required, park in a safe
location and set the parking brake.
3
72 ALL ABOUT UCONNECT ACCESS
• Stop use of the system immediately if a problem occurs.
Failure to do so may cause injury or damage to the
product. Return it to your authorized dealer to repair.
• Ensure the volume level of the system is set to a level
that still allows you to hear outside traffic and emergency vehicles.
Safe Usage Of The Uconnect Access System
• Read all instructions in this manual carefully before
using your system to ensure proper usage!
• Your system is a sophisticated electronic device. Do not
let young children use your system.
• Permanent hearing loss or damage may occur if you
play your music or otherwise operate the system at loud
volumes. Exercise caution when setting the volume on
your system.
NOTE: Many features of this system are speed dependent.
For your own safety, it is not possible to use some of the
touchscreen features while the vehicle is in motion.
• Keep drinks, rain, and other sources of moisture away
from your system. Besides damage to your system,
moisture can cause electric shocks as with any electronic
device.
Touchscreen
• Do not touch the screen with any hard or sharp objects
(pen, USB stick, jewelry, etc.) which could scratch the
touchscreen surface!
• Do not spray any liquid or caustic chemicals directly on
the screen! Use a clean and dry micro fiber lens cleaning
cloth in order to clean the touchscreen.
• If necessary, use a lint-free cloth dampened with a
cleaning solution, such as isopropyl alcohol, or an
isopropyl alcohol and water solution ratio of 50:50. Be
sure to follow the solvent manufacturer’s precautions
and directions.
Disc Drive
• Do not insert any damaged, warped, scratched or dirty
discs into the disc player.
• Discs that have been modified with an adhesive label
should not be used in the CD/DVD player.
• Do not insert more than one disc at a time into the drive
slot.
ALL ABOUT UCONNECT ACCESS 73
FCC Declaration
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation. Modifications not expressly approved by the radio manufacturer
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in an installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one
or more of the following measures:
Increase the separation between the equipment and
receiver.
Consult the dealer or an experienced radio technician for
help.
Safety Information
Exposure to Radio Frequency Radiation
The radiated output power of the internal wireless radio is
far below the FCC radio frequency exposure limits. Nevertheless, the wireless radio shall be used in such a manner
that the radio is 8 inches (20 cm) or further from the human
body.
The internal wireless radio operates within guidelines
found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. The radio manufacturer believes the internal wireless radio is safe for use by consumers. The level of energy
emitted is far less than the electromagnetic energy emitted
by wireless devices such as mobile devices.
DEVICE CONNECTION AND AUDIO TIPS WITH
UCONNECT
• More than one device can be paired to your vehicle. The
connected device with the highest priority will be used.
To transition between devices, Select Phone > Settings,
then press the desired device.
3
74 ALL ABOUT UCONNECT ACCESS
• Multiple devices may be connected at one time. For
example, a device can be paired and connected for
hands-free calling and texting, while a USB media
source is connected for audio. However, only one
Bluetooth connection can be used at a time.
• Device calls will always have the highest priority regardless of which connection is active (only the 9-1-1
Call and Assist will have a higher priority than the
device). For example, if an App is launched and the user
receives a call, the user will be exited out of the App and
returned to the App when the call ends.
• After all devices are connected/paired, when switching
to a different audio source, audio will auto-play from the
new source.
• Current audio (AM/FM/SXM/AUX) will continue to
play when switching to a non-media type App.
• Current audio (AM/FM/SXM/AUX) is muted during
Assist and 9-1-1 Call.
• Device calls will mute all audio except for NAV prompts
if guidance is currently active (audio will resume after
device call is ended).
• All secondary incoming device calls will be treated
similar to “call waiting” (except 9-1-1 Call).
• When connecting a second device via USB, that device
will have priority and auto play accordingly. A device
that is already paired/connected will still be available
for hands-free calling and texting.
• Incoming calls received while entering a nav destination
(before pressing “Go”) will cancel the nav entry. The
user is required to start over when the device call has
ended.
UCONNECT 8.4/8.4 NAV
CONTENTS
䡵 UCONNECT 8.4/8.4 NAV SYSTEM . . . . . . . . . . . .77
▫ Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
䡵 PERSONALIZED MENU BAR . . . . . . . . . . . . . . . .78
▫ Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
䡵 RADIO MODE . . . . . . . . . . . . . . . . . . . . . . . . . .79
▫ Phone Call Features . . . . . . . . . . . . . . . . . . . . .106
▫ Radio Controls . . . . . . . . . . . . . . . . . . . . . . . . .79
▫ Advanced Phone Connectivity . . . . . . . . . . . . .110
▫ Setting Presets . . . . . . . . . . . . . . . . . . . . . . . . .81
▫ Things You Should Know About Your Uconnect
Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
▫ SiriusXM Satellite Radio Mode — If Equipped . . .82
▫ Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
䡵 MEDIA MODE . . . . . . . . . . . . . . . . . . . . . . . . . .91
▫ Disc Mode — If Equipped . . . . . . . . . . . . . . . . .91
▫ USB/iPod Mode . . . . . . . . . . . . . . . . . . . . . . . .92
▫ AUX Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .93
▫ SD Card Mode — If Equipped . . . . . . . . . . . . . .94
▫ Bluetooth Mode . . . . . . . . . . . . . . . . . . . . . . . .95
䡵 UCONNECT PHONE . . . . . . . . . . . . . . . . . . . . .96
䡵 NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . .116
▫ Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . .116
▫ Where To? . . . . . . . . . . . . . . . . . . . . . . . . . . .117
▫ View Map . . . . . . . . . . . . . . . . . . . . . . . . . . .146
▫ Information . . . . . . . . . . . . . . . . . . . . . . . . . .155
▫ Emergency . . . . . . . . . . . . . . . . . . . . . . . . . . .157
▫ Map Updates . . . . . . . . . . . . . . . . . . . . . . . . .161
䡵 UCONNECT THEATER — IF EQUIPPED . . . . . .162
4
76 UCONNECT 8.4/8.4 NAV
▫ Uconnect Theater Overview . . . . . . . . . . . . . . .162
▫ Headphones Operation . . . . . . . . . . . . . . . . . . .176
▫ Getting Started . . . . . . . . . . . . . . . . . . . . . . . .163
▫ Disc Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . .179
▫ Accessing The System From The Uconnect
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
▫ Display Settings . . . . . . . . . . . . . . . . . . . . . . . .179
▫ Uconnect Theater Controls . . . . . . . . . . . . . . . .164
▫ Accessing The System From The Uconnect
Theater Rear Screens . . . . . . . . . . . . . . . . . . . .165
▫ Pairing The Remote . . . . . . . . . . . . . . . . . . . . .166
▫ Unpairing The Remote . . . . . . . . . . . . . . . . . . .166
▫ Media Sources . . . . . . . . . . . . . . . . . . . . . . . . .167
▫ Uconnect Theater Remote Control . . . . . . . . . . .167
▫ Uconnect Theater Home Screen And Controls . . .170
▫ Play A DVD/Blu-ray Or USB Media File From
Uconnect System . . . . . . . . . . . . . . . . . . . . . . .171
▫ Blu-ray Controls – Disc Specific Functions . . . . .173
▫ Uconnect Theater Apps. . . . . . . . . . . . . . . . . . .174
▫ Using The Rear Video USB Port. . . . . . . . . . . . .175
▫ Play Video Games . . . . . . . . . . . . . . . . . . . . . .176
▫ Listening To Audio With The Screen Closed . . . .180
▫ Rear Climate Controls. . . . . . . . . . . . . . . . . . . .180
▫ BD And DVD Region Codes . . . . . . . . . . . . . . .180
▫ Product Agreement . . . . . . . . . . . . . . . . . . . . .183
▫ General Information . . . . . . . . . . . . . . . . . . . . .186
▫ FCC/IC Regulatory Notices . . . . . . . . . . . . . . .186
䡵 SiriusXM TRAFFIC — U.S. MARKET 8.4 NAV
ONLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
䡵 SiriusXM TRAVEL LINK — U.S. MARKET
ONLY (8.4 NAV ONLY) . . . . . . . . . . . . . . . . . . .187
䡵 SECURITY FEATURES . . . . . . . . . . . . . . . . . . . .188
▫ Roadside Assistance Call — If Equipped . . . . . .188
▫ 9-1-1 Call — If Equipped . . . . . . . . . . . . . . . . .188
䡵 REMOTE SERVICE FEATURES . . . . . . . . . . . . . .192
UCONNECT 8.4/8.4 NAV 77
UCONNECT 8.4/8.4 NAV SYSTEM
3. Controls
Press the ⬙Controls⬙ button on the touchscreen to adjust the
auto-dimming mirror, heated & vented seats, heated &
vented steering wheel (If Equipped).
4. Apps
Press the “Apps
” button on the touchscreen to access
Smartphone and Connected vehicle options.
5. Climate
Refer to Climate Controls in your vehicle’s Owner’s
Manual for further details.
6. Nav — If Equipped
1. Radio
Press the “Radio” button on the touchscreen to enter Radio
Mode. The different tuner modes; AM, FM and SXM can be
selected by pressing the corresponding buttons on the
touchscreens in Radio Mode.
2. Media
Press the “Media” button on the touchscreen to access
media sources such as: Disc (If Equipped), USB Device,
AUX, Bluetooth, and SD Card (If Equipped) as long as the
requested media is present.
Press the “Nav” button on the touchscreen to access the
Navigation feature. Refer to the Navigation section in this
manual for further details.
7. Phone
Press the “Phone” button on the touchscreen to access the
Uconnect Phone feature.
4
78 UCONNECT 8.4/8.4 NAV
8. Enter/Browse & Tune/Scroll
Push the ENTER/BROWSE button to accept a highlighted
selection on the screen. Rotate the TUNE/SCROLL rotary
knob to scroll through a list or tune a radio station.
9. Back
Push the BACK button to return to a previous menu or
screen.
10. Volume/Mute
Rotate the rotary knob to adjust the Volume. Push the
VOLUME/MUTE button to mute the system.
PERSONALIZED MENU BAR
The Uconnect features and services in the main menu bar
are easily changed for your convenience. Simply follow
these steps:
1. Press the “Apps
” button to open the App screen.
2. Press and hold, then drag the selected App to replace an
existing shortcut in the main menu bar.
The new app shortcut, that was dragged down onto the
main menu bar, will now be an active App/shortcut.
NOTE: This feature is only available if the vehicle is in
PARK.
UCONNECT 8.4/8.4 NAV 79
The radio is equipped with the following modes:
Turn the rotary TUNE/SCROLL control knob clockwise to
increase or counterclockwise to decrease the radio station
frequency. Push the ENTER/BROWSE button to choose a
selection.
• AM
Screen Close
• FM
The X button on the touchscreen at the top right, provides
a means to close the Direct Tune Screen. The Direct Tune
Screen also auto closes if no activity occurs within 10 seconds.
RADIO MODE
Radio Controls
• SiriusXM Satellite Radio (if equipped)
Press the RADIO button on the touchscreen, bottom left
corner, to enter the Radio Mode. The different tuner modes;
AM, FM, and SXM, can then be selected by pressing the
corresponding buttons in the Radio mode.
VOLUME/MUTE Control
Push the VOLUME/MUTE control knob to mute the radio.
Push the VOLUME/MUTE control knob a second time to
unmute the radio.
The electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turning the
VOLUME/MUTE control knob clockwise increases the
volume, and counterclockwise decreases it.
TUNE/SCROLL Control
When the audio system is turned on, the sound will be set
at the same volume level as last played.
HD Radio (8.4 NAV Only)
HD Radio technology (available on Uconnect 8.4 NAV in
the U.S. market) works similar to conventional radio except
it allows broadcasters to transmit a high-quality digital
signal. With an HD radio receiver, the listener is provided
with a clear sound that enhances the listening experience.
HD radio can also transmit data such as song title or artist.
Seek And Direct Tune Functions
The Seek Up and Down functions are activated by pressing
the double arrow buttons on the touchscreen to the right
and left of the radio station display, or by pressing the left
“Steering Wheel Audio Control” (if equipped) up or down.
4
80 UCONNECT 8.4/8.4 NAV
Seek Up
Fast Seek Down
Press and release the “Seek Up”
button on the touchscreen to tune the radio to the next listenable station or
channel. During a Seek Up function, if the radio reaches
the starting station after passing through the entire band
two times, the radio will stop at the station where it
began.
button on the touchPress and hold the “Seek Down”
screen to advance the radio through the available stations or channel at a faster rate, the radio stops at the
next available station or channel when the button on the
touchscreen is released.
Fast Seek Up
Press the “Tune” button on the touchscreen located at the
bottom of the radio screen. The Direct Tune button on the
touchscreen is available in AM, FM and SXM radio modes
and can be used to direct tune the radio to a desired station
or channel.
button on the touchPress and hold the “Seek Up”
screen to advance the radio through the available stations or channels at a faster rate, the radio stops at the
next available station or channel when the button on the
touchscreen is released.
Seek Down
Press and release the “Seek Down”
button on the
touchscreen to tune the radio to the next listenable
station or channel. During a Seek Down function, if the
radio reaches the starting station after passing through
the entire band two times, the radio will stop at the
station where it began.
Direct Tune
Press the available number button on the touchscreen to
begin selecting a desired station. Once a number has been
entered, any numbers that are no longer possible (stations
that cannot be reached) will become deactivated/grayed
out.
Undo
You can backspace an entry by pressing the bottom left
button on the touchscreen.
“Undo” button or the
UCONNECT 8.4/8.4 NAV 81
GO
Browse In AM/FM
Once the last digit of a station has been entered, the
DIRECT TUNE screen will close and the system will
automatically tune to that station.
When in either AM or FM, the Browse Screen provides a
means to edit the Presets List and is entered by pushing the
ENTER/BROWSE button.
The selected Station or Channel number is displayed in the
Direct Tune text box.
Scrolling Preset List
Setting Presets
The Presets are available for all Radio Modes, and are
activated by pressing any of the six “Preset” buttons on the
touchscreen, located at the top of the screen.
Once in the Browse Presets screen, you can scroll the preset
list by rotation of the TUNE/SCROLL knob, or by pressing
the “Up and Down” arrow keys, located on the right of the
screen.
Preset Selection From List
When you are receiving a station that you wish to commit
into memory, press and hold the desired numbered button
on the touchscreen for more than two seconds or until you
hear a confirmation beep.
A Preset can be selected by pressing any of the listed
Presets, or by pushing the ENTER/BROWSE button on the
TUNE/SCROLL knob to select the currently highlighted
Preset.
The Radio stores up to 12 presets in each of the Radio
modes. A set of 6 presets are visible at the top of the radio
screen.
When selected, the radio tunes to the station stored in the
Preset and returns to the main radio screen.
You can switch between the two radio presets by pressing
the “arrow button” located in the upper right of the radio
touchscreen.
A Preset can be deleted in the Presets Browse screen by
pressing the “Trash Can” icon for the corresponding Preset.
Deleting Presets
4
82 UCONNECT 8.4/8.4 NAV
Return To Main Radio Screen
You can return to the Main Radio Screen, by pressing the
“X” button on the touchscreen when in the Browse Presets
screen.
• Xtra Channels featuring SiriusXM Latino – a collection
of Spanish-language channels
• MySXM – allowing you to personalize your favorite
music channels
SiriusXM Satellite Radio Mode — If Equipped
Go to siriusxm.com/getallaccess for more information
SiriusXM Satellite Radio uses direct satellite-to-receiver
broadcasting technology to provide clear, coast to coast
radio content. SiriusXM is a subscription based service.
SiriusXM services require subscriptions, sold separately
after the 12-month trial included with the new vehicle
purchase. If you decide to continue your service at the end
of your trial subscription, the plan you choose will automatically renew and bill at then-current rates until you call
SiriusXM at 866-635-2349 to cancel. See SiriusXM Customer
Agreement for complete terms at www.siriusxm.com. All
fees and programming subject to change. Our satellite
service is available only to those at least 18 and older in the
48 contiguous USA and D.C. Our SiriusXM satellite service
is also available in PR (with coverage limitations). Our
Internet radio service is available throughout our satellite
service area and in AK. © 2016 SiriusXM Radio Inc. Sirius,
XM and all related marks and logos are trademarks of
SiriusXM Radio Inc. Service available in Canada; see
www.siriusxm.ca.
SiriusXM All Access Package
All satellite radio equipped vehicles come with a one year
trial to the SiriusXM All Access package, providing over
160 channels of the best programming for all the places life
takes you.
• In your vehicle — You’ll get every channel available on
your radio, including all the premium programming like
Howard Stern, every NFL game, every MLB game, every
NASCAR race, Oprah Radio, and more.
• On the go — With a SiriusXM Internet Radio subscription included with the All Access trial, you’ll get
SiriusXM on your computer, smartphone, or tablet.
Including:
• A huge On Demand catalog
This functionality is only available for radios equipped
with a Satellite receiver. In order to receive satellite radio,
the vehicle needs to be outside with a clear view to the sky.
UCONNECT 8.4/8.4 NAV 83
If the screen shows Acquiring Signal, you might have to
change the vehicle’s position in order to receive a signal. In
most cases, the satellite radio does not receive a signal in
underground parking garages or tunnels.
No Subscription
Radios equipped with a Satellite receiver, require a subscription to the SiriusXM Service. When the Radio does not
have the necessary subscription, the Radio is able to receive
the Pre-View channel only.
Acquiring SiriusXM Subscription
To activate the SiriusXM Satellite Radio subscription, U.S.
residents call:
1-800-643-2112
Canadian residents call:
1-877-438-9677
NOTE: You will need to provide the SiriusXM ID (RID)
located at the bottom of the Channel 0 screen.
The Satellite Mode is activated by a press of the “SXM”
button on the touchscreen.
When in Satellite mode:
• The SXM button on the touchscreen is highlighted.
• The SiriusXM Presets are displayed at the top of the
screen.
• The Genre is displayed below the Presets Bar.
• The SiriusXM Channel Number is displayed in the
center.
• The Program Information is displayed at the bottom of
the Channel Number.
• The SiriusXM function buttons are displayed below the
Program Information.
Tuning is done by operating the Tune Knob or by Direct
Tune, similar to other Radio Bands, see Presets, browse,
Tune Knob, and Direct Tune.
In addition to the tuning Operation functions common to
all Radio modes, the replay, Traffic/Weather Jump, and fav
button functions are available in SiriusXM Mode.
Replay
The replay function provides a means to store and replay
up to 22 minutes of music audio and 48 minutes of talk
radio. Once the channel is switched, content in replay
memory is lost.
4
84 UCONNECT 8.4/8.4 NAV
Press the “Replay” button on the touchscreen. The play/
pause, rewind/forward and live buttons will display at the
top of the screen, along with the replay time.
You can exit by pressing the “Replay” button on the
touchscreen, any time during the Replay mode.
Play/Pause
also forwards the content. The Radio begins playing the
content at the point at which the press is release.
Live
Press the “Live” button on the touchscreen to resume
playing of Live content.
Favorites
Press the “Pause/Play” button on the touchscreen to pause
the playing of live or rewound content at any time. Play
can be resumed again by pressing of the “Pause/Play”
button on the touchscreen.
Press the “fav.” button on the touchscreen to activate the
favorites menu, which will time out in five seconds in
absence of user interaction.
Rewind
You can exit the Favorites Menu by a press of the “X” in the
top right corner.
Press the “RW” button on the touchscreen to rewind the
content in steps of five seconds. Pressing the “RW” button
on the touchscreen for more than two seconds rewinds the
content. The Radio begins playing the content at the point
at which the press is released.
The favorites feature enables you to set a favorite artist, or
song that is currently playing. The Radio then uses this
information to alert you when either the favorite song, or
favorite artist are being played at any time by any of the
SiriusXM Channels.
Forward
The maximum number of favorites that can be stored in the
Radio is 50.
Each press of the “FW” button on the touchscreen forwards
the content in steps of five seconds. Forwarding of the
content can only be done when the content is previously
rewound, and therefore, can not be done for live content. A
continuous press of the “FW” button on the touchscreen
Fav. Artist: While the song is playing to set a Favorite
Artist, press the “fav.” button on the touchscreen and then
the Fav. Artist button on the touchscreen.
UCONNECT 8.4/8.4 NAV 85
Fav. Song: While the song is playing to set a Favorite Song,
press the “fav.” button on the touchscreen and then the Fav
Song button on the touchscreen.
Traffic & Weather — Available On The 8.4 NAV If
Equipped In The U.S. Market Only
Press the Traffic & Weather button on the touchscreen to
tune to a SiriusXM Traffic and Weather channel. To set a
Traffic & Weather alert for any one of the cities in the Jump
Browse list, see Browse in SXM.
When the Traffic & Weather button on the touchscreen is
pressed, the Traffic & Weather channel is tuned.
If the Traffic & Weather alert City is not set, you are
presented with a pop up to allow you to select the favorite
city using the Browse Screen.
All
Press the “All” button at the left of the Browse Screen.
Channel List
Press the Channel List, or Genre, to display all the
SiriusXM Channel Numbers. You can scroll the Channel
list by pressing the “Up and Down arrows”, located on the
right side of the screen. Scrolling can also be done by
operating the TUNE/SCROLL knob.
Genre
Press the “Genre” button on the touchscreen to display a
list of Genres. You can select any desired Genre by pressing
the “Genre” list, the Radio tunes to a channel with the
content in the selected Genre.
Browse In SXM
Presets
Press the “Browse” button on the touchscreen to edit
Presets, Favorites, Game Zone, and Jump settings, along
with providing the SiriusXM Channel List.
Press the “Presets” button located at the left of the Browse
screen.
This Screen contains many sub menus. You can exit a sub
menu to return to a parent menu by pressing the “Back
Arrow.”
You can scroll the Presets list pressing the up and down
arrows located at the right side of the screen. Scrolling can
also be done by operating the TUNE/SCROLL knob as
well.
4
86 UCONNECT 8.4/8.4 NAV
Preset Selection
Remove Favorites
A Preset can be selected by pressing any of the listed
“Presets”, or by pushing the ENTER/BROWSE button on
the TUNE/SCROLL knob to select the currently highlighted Preset. When selected, the Radio tunes to the
station stored in the Preset, and returns to the main Radio
screen.
Press the “Remove Favorites” tab at the top of the screen.
Press the “Delete All” button on the touchscreen to delete
all of the Favorites or press the “Trash Can” icon next to the
Favorite to be deleted.
Alert Settings
A Preset can be deleted in the Presets Browse screen by
pressing the “Trash Can” Icon for the corresponding Preset.
Press the “Alert Setting” tab at the top of the screen. The
Alert Settings menu allows you to choose from a Visual
alert or Audible and Visual alert when one of your favorites is airing on any of the SiriusXM channels.
Favorites
Tune Start
Press the “Favorites” button located at the left of the
Browse screen.
Tune Start begins playing the current song from the
beginning when you tune to a music channel using one of
the twelve presets, so you can enjoy the complete song.
This feature occurs the first time the preset is selected
during that current song. Tune Start works in the background, so you will not even realize it’s on, except that you
will miss the experience of joining your favorite song with
only a few seconds left to play. Refer to “Uconnect Settings” in your Owner’s Manual for further information.
Deleting A Preset
The Favorites menu provides a means to Edit the Favorites
list and to configure the Alert Settings, along with providing a list of Channels currently airing any of the items in
the Favorites list.
You can scroll the Favorites list by pressing the “Up and
Down” arrows located at the right side of the screen.
Scrolling can also be done by operating the TUNE/
SCROLL knob as well.
UCONNECT 8.4/8.4 NAV 87
Game Zone
Remove Selection
Press the “Game Zone” button, located at the left of the
Browse screen. This feature provides you with the ability to
select teams, edit the selection, and set alerts.
Press the “Remove Selection” tab at the top of the screen.
Press the “Delete All” button on the touchscreen to delete
all of the Selections or press the “Trash Can Icon” next to
the Selection to be deleted.
On Air
Press the “On-Air” tab at the top of the screen. The On-Air
list provides a list of Channels currently airing any of the
items in the Selections list, and pressing any of the items in
the list tunes the radio to that channel.
Select Teams
Press the “Select Teams” button on the touchscreen to
activate the League Scroll list. Press the chosen league and
a scroll list of all teams within the league will appear, then
you can select a team by pressing the corresponding box. A
check mark appears for all teams that are chosen.
Alert Settings
Press the “Alert Setting” tab at the top of the screen. The
Alert Settings menu allows you to choose from “Alert me
to on-air games upon start” or “Alert upon score update”
or both when one or more of your selections is airing on
any of the SiriusXM channels.
Audio
Press the “Audio” button on the touchscreen to activate the
Audio settings screen to adjust Balance/Fade, Equalizer,
Speed Adjusted Volume, Aux volume Offset, and Surround
Sound.
You can return to the Radio screen by pressing the “X”
located at the top right.
4
88 UCONNECT 8.4/8.4 NAV
Balance/Fade
Equalizer
Press the “Balance/Fade” button on the touchscreen to
Balance audio between the front speakers or fade the audio
between the rear and front speakers.
Press the “Equalizer” button on the touchscreen to activate
the Equalizer screen.
Pressing the “Front,” “Rear,” “Left,” or “Right” buttons or
press and drag the red Speaker Icon to adjust the Balance/
Fade.
Press the “+” or “–” buttons, or by pressing and dragging
over the level bar for each of the equalizer bands. The level
value, which spans between ±9, is displayed at the bottom
of each of the Bands.
UCONNECT 8.4/8.4 NAV 89
Speed Adjusted Volume
Surround Sound
Press the “On” button on the touchscreen to activate
Surround Sound. Press “Off” to deactivate this feature.
When Surround Sound is On, you can hear audio coming
from every direction as in a movie theatre or home theatre
system.
4
Press the “Speed Adjusted Volume” button on the touchscreen to activate the Speed Adjusted Volume screen.
The Speed Adjusted Volume is adjusted by selecting from
“Off,” “1,” “2” or “3.” This alters the automatic adjustment
of the audio volume with variation to vehicle speed.
Volume increases automatically as speed increase to compensate for normal road noise.
90 UCONNECT 8.4/8.4 NAV
Loudness
AUX Volume Offset
Press the “On” button on the touchscreen to activate
Loudness. Press “Off” to deactivate this feature.
Press the “AUX Volume Offset” button on the touchscreen
to activate the AUX Volume Offset screen.
When Loudness is On, the sound quality at lower volumes
improves.
The AUX Volume Offset is adjusted by pressing of the “+”
and “–” buttons. This alters the AUX input audio volume.
The level value, which spans between ±3, is displayed
above the adjustment bar.
UCONNECT 8.4/8.4 NAV 91
MEDIA MODE
Disc Mode — If Equipped
Overview
Disc Mode is entered by either inserting a Disc or pressing
the “Disc” button on the left side of the display. Once in
Media Mode, press the “Source” button on the touchscreen
and select “CD.”
A “Insert Disc” message will be displayed on the screen in
the Disc mode when a Disc is not present in the Radio.
Seek Up
/Seek Down
Press and release the Seek Up
button on the touchscreen for the next selection on the Disc. Press and
button on the touchscreen to
release the Seek Down
return to the beginning of the current selection, or to
return to the beginning of the previous selection if the
Disc is within the first three seconds of the current
selection.
Browse
Press the “Browse” button on the touchscreen to display
the browse window. The left side of the browse window
displays a list of ways you can browse through the contents
of the Disc. If supported by the device, you can browse by
Folders, Artists, Playlists, Albums, Songs, etc. Press the
desired button on the touchscreen on the left side of the
screen. The center of the browse window shows items and
it’s sub-functions, which can be scrolled by pressing the
“Up” and “Down” buttons to the right. The TUNE/
SCROLL knob can also be used to scroll.
Media Mode
Press the “Media” button on the touchscreen to select the
desired audio source: Disc.
Repeat
Press the “Repeat” button on the touchscreen to toggle the
repeat functionality. The Repeat button on the touchscreen
is highlighted when active. The Radio will continue to play
the current track, repeatedly, as long as the repeat is active.
Shuffle
Press the “Shuffle” button on the touchscreen to play the
selections on the compact disc in random order to provide
an interesting change of pace. Press the button on the
touchscreen a second time to turn this feature off.
Audio
Refer to Radio Mode for adjusting the audio settings.
4
92 UCONNECT 8.4/8.4 NAV
Info
Press the “Info” button on the touchscreen to display the
current track information. Press the “Info” button on the
touchscreen a second time to cancel this feature.
Tracks
Press the “trks” button on the touchscreen to display a pop
up with the Song List. The currently playing song is
indicated by an arrow and lines above and below the song
title. When in the Tracks List screen you can rotate the
TUNE/SCROLL knob to highlight a track (indicated by the
line above and below the track name) and then push the
ENTER/BROWSE knob to start playing that track.
Press and release the Seek Down
button on the
touchscreen to return to the beginning of the current
selection, or to return to the beginning of the previous
selection if the USB device/iPod is within the first three
seconds of the current selection.
Browse
USB/iPod Mode
Press the “Browse” button on the touchscreen to display
the browse window. The left side of the browse window
displays a list of ways you can browse through the contents
of the USB device/iPod. If supported by the device, you
can browse by Folders, Artists, Playlists, Albums, Songs,
etc. Press the desired button on the left side of the screen.
The center of the browse window shows items and it’s
sub-functions, which can be scrolled by pressing the “Up”
and “Down” buttons to the right. The TUNE/SCROLL
knob can also be used to scroll.
Overview
Media Mode
USB/iPod Mode is entered by either inserting a USB device
or iPod and cable into the USB Port or press the “iPod”
button on the left side of the display.
Press the “Media” button on the touchscreen to select the
desired audio source: USB.
Pressing the “trks” button on the touchscreen while the
pop up is displayed will close the pop up.
Seek Up
/Seek Down
Press and release the Seek Up
button on the touchscreen for the next selection on the USB device/iPod.
Repeat
Press the “Repeat” button on the touchscreen to toggle the
repeat functionality. The Repeat button on the touchscreen
UCONNECT 8.4/8.4 NAV 93
is highlighted when active. The Radio will continue to play
the current track, repeatedly, as long as the repeat is active.
Shuffle
Press the “Shuffle” button on the touchscreen to play the
selections on the USB/iPod device in random order to
provide an interesting change of pace. Press the “Shuffle”
button on the touchscreen a second time to turn this feature
off.
Info
Press the “Info” button on the touchscreen to display the
current track information. Press the “Info” button on the
touchscreen a second time to cancel this feature.
Tracks
Press the “trks” button on the touchscreen to display a pop
up with the Song List. The currently playing song is
indicated by an arrow and lines above and below the song
title. When in the “trks” List screen you can rotate the
TUNE/SCROLL knob to highlight a track (indicated by the
line above and below the track name) and then push the
ENTER/BROWSE knob to start playing that track.
Pressing the “trks” button on the touchscreen while the
pop up is displayed will close the pop up.
Audio
Refer to Radio Mode for adjusting the audio settings.
AUX Mode
Overview
AUX (Auxiliary Mode) is entered by inserting an AUX
device using a cable with a 3.5 mm audio jack into the AUX
port or by pressing the AUX button on the left side of the
display.
Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the AUX Port.
If you insert an Auxiliary device with the ignition ON and
the radio ON, the unit will switch to AUX mode and begin
to play when you insert the device cable.
Controlling The Auxiliary Device
The control of the auxiliary device (e.g., selecting playlists,
play, fast forward, etc.) cannot be provided by the radio;
use the device controls instead. Adjust the volume with the
VOLUME/MUTE rotary knob, or with the volume of the
attached device.
4
94 UCONNECT 8.4/8.4 NAV
NOTE: The vehicle radio unit is acting as the amplifier for
audio output from the Auxiliary device. Therefore if the
volume control on the Auxiliary device is set too low, there
will be insufficient audio signal for the radio unit to play
the music on the device.
Media Mode
Press the “Media” button on the touchscreen to select the
desired audio source: AUX.
Audio
Refer to Radio Mode for adjusting the audio settings.
SD Card Mode — If Equipped
Overview
SD Card Mode is entered by either inserting a SD Card into
the SD Card slot or press the “SD Card” button on the left
side of the display.
Seek Up
/Seek Down
Press and release the Seek Up
button on the touchscreen for the next selection on the SD Card. Press and
button on the touchscreen to
release the Seek Down
return to the beginning of the current selection, or to
return to the beginning of the previous selection if the
SD Card is within the first three seconds of the current
selection.
Browse
Press the “Browse” button on the touchscreen to display
the browse window. The left side of the browse window
displays a list of ways you can browse through the contents
of the SD Card. If supported by the device, you can browse
by Folders, Artists, Playlists, Albums, Songs, etc. Press the
desired button on the left side of the screen. The center of
the browse window shows items and it’s sub-functions,
which can be scrolled by pressing the “Up” and “Down”
buttons to the right. The TUNE/SCROLL knob can also be
used to scroll.
Media Mode
Press the “Media” button on the touchscreen to select the
desired audio source: SD Card.
Repeat
Press the “Repeat” button on the touchscreen to toggle the
repeat functionality. The Repeat button on the touchscreen
is highlighted when active. The Radio will continue to play
the current track, repeatedly, as long as the repeat is active.
UCONNECT 8.4/8.4 NAV 95
Shuffle
Press the “Shuffle” button on the touchscreen to play the
selections on the SD Card device in random order to
provide an interesting change of pace. Press the “Shuffle”
button on the touchscreen a second time to turn this feature
off.
Pressing the “trks” button on the touchscreen while the
pop up is displayed will close the pop up.
Audio
Refer to Radio Mode for adjusting the audio settings.
Bluetooth Mode
Info
Overview
Press the “Info” button on the touchscreen to display the
current track information. Press the “Info” button on the
touchscreen a second time to cancel this feature.
Bluetooth Streaming Audio (BTSA) or Bluetooth Mode is
entered by pairing a Bluetooth device, containing music, to
the Uconnect System.
Tracks
Before proceeding, the Bluetooth device must be paired to
the Uconnect Phone to communicate with the Uconnect
System.
Press the “trks” button on the touchscreen to display a pop
up with the Song List. The currently playing song is
indicated by an arrow and lines above and below the song
title. When in the Tracks List screen you can rotate the
TUNE/SCROLL knob to highlight a track (indicated by the
line above and below the track name) and then push the
ENTER/BROWSE knob to start playing that track.
NOTE: See the pairing procedure in the Uconnect Phone
section for more details.
4
96 UCONNECT 8.4/8.4 NAV
To access Bluetooth mode, press the “Bluetooth” button on
the left side of the display.
Media Mode
Press the “Media” button on the touchscreen to select the
desired audio source: Bluetooth.
Tracks
If the Bluetooth device supports this feature, press the
“trks” button on the touchscreen to display a pop up with
the Song List. The currently playing song is indicated by a
red arrow and lines above and below the song title.
Pressing the “trks” button on the touchscreen while the
pop up is displayed will close the pop up.
Audio
Refer to Radio Mode for adjusting the audio settings.
Seek Up
/Down
Press and release the “Right Arrow”
button on the
touchscreen for the next selection on the Bluetooth
button on
device. Press and release the “Left Arrow”
the touchscreen to return to the beginning of the current
selection, or return to the beginning of the previous
selection if the Bluetooth device is within the first
second of the current selection.
UCONNECT PHONE
Overview
Uconnect Phone is a voice-activated, hands-free, in-vehicle
communications system. Uconnect Phone allows you to
dial a phone number with your mobile phone.
UCONNECT 8.4/8.4 NAV 97
Uconnect Phone supports the following features:
Voice Activated Features:
• Hands-Free dialing via Voice (“Call John Smith Mobile”
or, “Dial 248-555-1212”).
• Hands-Free text to speech listening of your incoming
SMS messages.
• Hands-free Text Message Reply. (Forward one of 18 predefined SMS messages to incoming calls/text messages).
• Redialing last dialed numbers (“Redial”).
• Calling Back the last incoming call number (“Call
Back”).
• View Call logs on screen (“Show incoming calls,” “Show
Outgoing calls,” “Show missed Calls,” “Show Recent
Calls”).
• Searching Contacts phone number (“Search for John
Smith Mobile”).
• Voice Texting (Requires registration to Uconnect Access
and a current subscription).
NOTE: Examples of Voice Commands are provided
throughout this manual. For quick use, go to the Voice
Command Quick Reference Section. Voice Texting (Requires registration to Uconnect Access and a current subscription).
Screen Activated Features
• Dialing via Keypad using touchscreen.
• Viewing and Calling contacts from Phonebooks displayed on the touchscreen.
• Setting Favorite Contact Phone numbers so the are easily
accessible on the Main Phone screen.
• Viewing and Calling contacts from Recent Call logs.
• Reviewing your recent Incoming SMS.
• Listen to Music on your Bluetooth Device via the
touchscreen.
• Pairing up to 10 phones/audio devices for easy access to
connect to them quickly.
NOTE: Your phone must be capable of SMS messaging via
Bluetooth for messaging features to work properly.
4
98 UCONNECT 8.4/8.4 NAV
Your mobile phone’s audio is transmitted through your
vehicle’s audio system; the system will automatically mute
your radio when using the Uconnect Phone.
For Uconnect customer support:
• U.S. residents - visit UconnectPhone.com or call:
877-855-8400
• Canadian residents - (English) call:
800-465-2001
or (French) call:
800-387-9983
Uconnect Phone allows you to transfer calls between the
system and your mobile phone as you enter or exit your
vehicle and enables you to mute the system’s microphone
for private conversation.
WARNING! (Continued)
and applications in this vehicle. Only use Uconnect
when it is safe to do so. Failure to do so may result
in an accident involving serious injury or death.
The Uconnect Phone is driven through your Bluetooth
“Hands-Free Profile” mobile phone. Uconnect features
Bluetooth technology - the global standard that enables
different electronic devices to connect to each other without wires or a docking station, so Uconnect Phone works
no matter where you stow your mobile phone (be it your
purse, pocket, or briefcase), as long as your phone is turned
on and has been paired to the vehicle’s Uconnect Phone.
The Uconnect Phone allows up to ten mobile phones or
audio devices to be linked to the system. Only one linked
(or paired) mobile phone and one audio device can be used
with the system at a time.
Uconnect Phone Button
WARNING!
ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume
all risks related to the use of the Uconnect features
(Continued)
button on your steering wheel is
The Uconnect Phone
used to get into the phone mode and make calls, show
recent, incoming, outgoing calls, view phonebook etc.,
When you press the button you will hear a BEEP. The
beep is your signal to give a command.
UCONNECT 8.4/8.4 NAV 99
Uconnect Voice Command Button
button on your steerThe Uconnect Voice Command
ing wheel is only used for “barge in” and when you are
already in a call and you want to send Tones or make
another call.
The
button on your steering wheel is also used to
access the Voice Commands for the Uconnect Voice
Command features if your vehicle is equipped. Please
see the Uconnect Voice Command section for direction
button.
on how to use the
The Uconnect Phone is fully integrated with the vehicle’s
audio system. The volume of the Uconnect Phone can be
adjusted either from the radio volume control knob or from
the steering wheel radio control (right switch), if equipped.
Operation
Voice commands can be used to operate the Uconnect
Phone and to navigate through the Uconnect Phone menu
structure. Voice commands are required after most
Uconnect Phone prompts. There are two general methods
for how Voice Command works:
1. Say compound commands like “Call John Smith mobile.”
2. Say the individual commands and allow the system to
guide you to complete the task.
You will be prompted for a specific command and then
guided through the available options.
• Prior to giving a voice command, one must wait for the
beep, which follows the “Listen” prompt or another
prompt.
• For certain operations, compound commands can be
used. For example, instead of saying “Call” and then
“John Smith” and then “mobile”, the following compound command can be said: “Call John Smith mobile.”
• For each feature explanation in this section, only the
compound command form of the voice command is
given. You can also break the commands into parts and
say each part of the command when you are asked for it.
For example, you can use the compound command form
voice command “Search for John Smith,” or you can
break the compound command form into two voice
commands: “Search Contact” and when asked “John
Smith.” Please remember, the Uconnect Phone works
best when you talk in a normal conversational tone, as if
speaking to someone sitting a few feet/meters away
from you.
4
100 UCONNECT 8.4/8.4 NAV
Natural Speech
Your Uconnect Phone Voice system uses a Natural Language Voice Recognition (VR) engine.
Natural speech allows the user to speak commands in
phrases or complete sentences. The system filters out
certain non-word utterances and sounds such as “ah” and
“eh.” The system handles fill-in words such as “I would
like to.”
The system handles multiple inputs in the same phrase or
sentence such as “make a phone call” and “to Kelly Smith.”
For multiple inputs in the same phrase or sentence, the
system identifies the topic or context and provides the
associated follow-up prompt such as “Who do you want to
call?” in the case where a phone call was requested but the
specific name was not recognized.
The system utilizes continuous dialog; when the system
requires more information from the user it will ask a
question to which the user can respond without pushing
button on your steering wheel.
the “Voice Command”
Help Command
If you need assistance at any prompt, or if you want to
know your options at any prompt, say “Help” following
the beep.
To activate the Uconnect Phone from idle, simply push the
Phone
button on your steering wheel and say a
command or say “help.” All Uconnect Phone sessions
button on the radio
begin with a push of the Phone
control head.
Cancel Command
At any prompt, after the beep, you can say “Cancel” and
you will be returned to the main menu.
or Voice Command
You can also push the Phone
button on your steering wheel when the system is
listening for a command and be returned to the main or
previous menu.
Pair (Link) Uconnect Phone To A Mobile Phone
To begin using your Uconnect Phone, you must pair your
compatible Bluetooth enabled mobile phone. Mobile phone
pairing is the process of establishing a wireless connection
between a cellular phone and the Uconnect system.
To complete the pairing process, you will need to reference
your mobile phone Owner’s Manual. Please visit
UconnectPhone.com for complete mobile phone compatibility information.
UCONNECT 8.4/8.4 NAV 101
3. Select “Yes” to begin the pairing process.
4. Search for available devices on your Bluetooth enabled
mobile phone.
• Press the Settings button on your mobile phone.
• Select Bluetooth and ensure it is enabled. Once enabled, the mobile phone will begin to search for
Bluetooth connections.
NOTE:
• You must have Bluetooth enabled on your phone to
complete this procedure.
• The vehicle must be in PARK.
1. Place the ignition in the ACC or ON position.
2. Press the “Phone” button in the Menu Bar on the
touchscreen.
• If there is no phones currently connected with the
system, a pop-up will appear asking if you would like
to pair a mobile phone.
5. If No is selected, and you still would like to pair a
mobile phone, press the “Settings” button from the
Uconnect Phone main screen.
• Select “Paired Phones” then press the “Add Device”
button on the touchscreen.
• Search for available devices on your Bluetooth enabled
mobile phone (see below). When prompted on the
phone, select “Uconnect” and accept the connection
request.
6. Uconnect Phone will display an in progress screen while
the system is connecting.
7. When your mobile phone finds the Uconnect system,
select “Uconnect.”
8. When prompted on the mobile phone, accept the connection request from Uconnect Phone.
4
102 UCONNECT 8.4/8.4 NAV
NOTE: Some mobile phones will require you to enter the
PIN number.
9. When the pairing process has successfully completed,
the system will prompt you to choose whether or not
this is your favorite phone. Selecting “Yes” will make
this phone the highest priority. This phone will take
precedence over other paired phones within range and
will connect to the Uconnect system automatically when
entering the vehicle. Only one mobile phone and/or one
Bluetooth audio device can be connected to the
Uconnect system at a time. If “No” is selected, simply
select “Uconnect” from the mobile phone/audio device
Bluetooth screen, and the Uconnect system will reconnect to the Bluetooth device.
Pair Additional Mobile Phones
1. Press the “Settings” button on the touchscreen from the
Phone main screen.
2. Next, press the “Phone/Bluetooth” button on the touchscreen.
UCONNECT 8.4/8.4 NAV 103
NOTE: For phones which are not made a favorite, the
phone priority is determined by the order in which it was
paired. The latest phone paired will have the higher
priority.
You can also use the following VR commands to bring up
the Paired Phone screen from any screen on the radio:
• “Show Paired Phones” or
• “Connect My Phone”
Pair A Bluetooth Streaming Audio Device
1. Press the “Media” button on the touchscreen to begin.
3. Press the “Add Device” button on the touchscreen.
4. Search for available devices on your Bluetooth enabled
mobile phone. When prompted on the phone, enter the
name and PIN shown on the Uconnect screen.
5. Uconnect Phone will display an in process screen while
the system is connecting.
6. When the pairing process has successfully completed,
the system will prompt you to choose whether or not
this is your favorite phone. Selecting “Yes” will make
this phone the highest priority. This phone will take
precedence over other paired phones within range.
2. Change the Source to Bluetooth.
3. Press the “Bluetooth” button on the touchscreen to
display the Paired Audio Devices screen.
4. Press the “Add Device” button on the touchscreen.
NOTE: If there is no device currently connected with the
system, a pop-up will appear.
5. Search for available devices on your Bluetooth enabled
audio device. When prompted on the device, enter the
PIN shown on the Uconnect screen.
4
104 UCONNECT 8.4/8.4 NAV
6. Uconnect Phone will display an in process screen while
the system is connecting.
2. Press the “Paired Phones” or “Paired Audio Sources”
button on the touchscreen.
7. When the pairing process has successfully completed,
the system will prompt you to choose whether or not
this is your favorite device. Selecting Yes will make this
device the highest priority. This device will take precedence over other paired devices within range.
3. Press to select the particular Phone or the particular
Audio Device.
NOTE: For devices which are not made a favorite, the
device priority is determined by the order in which it was
paired. The latest device paired will have the higher
priority.
1. Press the “Settings” button on the touchscreen.
You can also use the following VR command to bring up a
list of paired audio devices.
4. Press the “X” to exit out of the Settings screen.
Disconnecting A Phone Or Audio Device
2. Press the “Paired Phones” or “Paired Audio Devices”
button on the touchscreen.
3. Press the “Settings” button located to the right of the
device name.
• “Show Paired Phones” or
4. The options pop-up will be displayed.
• “Connect My Phone”
5. Press the “Disconnect Device” button on the touchscreen.
Connecting To A Particular Mobile Phone Or Audio
Device After Pairing
6. Press the “X” to exit out of the Settings screen.
Uconnect Phone will automatically connect to the highest
priority paired phone and/or Audio Device within range.
If you need to choose a particular phone or Audio Device
follow these steps:
1. Press the “Settings” button on the touchscreen.
Deleting A Phone Or Audio Device
1. Press the “Settings” button on the touchscreen.
2. Press the “Pair Phones” or “Paired Audio Devices”
button on the touchscreen.
UCONNECT 8.4/8.4 NAV 105
3. Press the “Settings” button located to the right of the
device name for a different Phone or Audio Device than
the currently connected device.
4. The options pop-up will be displayed.
5. Press the “Delete Device” button on the touchscreen.
6. Press the “X” to exit out of the Settings screen.
Making A Phone Or Audio Device A Favorite
1. Press the “Settings” button on the touchscreen.
2. Press the “Paired Phones” or “Paired Audio Devices”
button on the touchscreen.
3. Press the “Settings” button located to the right of the
device name.
names) and number entries from the mobile phone’s
phonebook. Specific Bluetooth Phones with Phone Book
Access Profile may support this feature. See Uconnect
website, UconnectPhone.com, for supported phones.
• To call a name from a downloaded mobile phone book,
follow the procedure in the “VOICE RECOGNITION
QUICK TIPS” section.
• Automatic download and update of a phone book, if
supported, begins as soon as the Bluetooth wireless
phone connection is made to the Uconnect Phone, for
example, after you start the vehicle.
• A maximum of 5,000 contact names with four numbers
per contact will be downloaded and updated every time
a phone is connected to the Uconnect Phone.
6. Press the “X” to exit out of the Settings screen.
• Depending on the maximum number of entries downloaded, there may be a short delay before the latest
downloaded names can be used. Until then, if available,
the previously downloaded phonebook is available for
use.
Phonebook Download (Automatic Phonebook
Transfer From Mobile Phone) — If Equipped
• Only the phonebook of the currently connected mobile
phone is accessible.
4. The options pop-up will be displayed.
5. Press the “Make Favorite” button on the touchscreen;
you will see the chosen device move to the top of the list.
If equipped and specifically supported by your phone,
Uconnect Phone automatically downloads names (text
4
106 UCONNECT 8.4/8.4 NAV
• This downloaded phonebook cannot be edited or deleted on the Uconnect Phone. These can only be edited
on the mobile phone. The changes are transferred and
updated to Uconnect Phone on the next phone connection.
4. Select an empty entry and press the ⬙Settings⬙ button on
that selected entry. When the Options pop-up appears,
press “Add from Mobile.” You will then be asked which
contact and number to choose from your mobile phonebook. When complete the new favorite will be shown.
Managing Your Favorites
To Remove A Favorite
There are three ways you can add an entry to your
Favorites.
1. To remove a Favorite, select “phonebook” from the
Phone main screen.
1. During an active call of a number to make a favorite,
press and hold the preset button on the touchscreen on
the top of the phone main screen.
2. Next select “Favorites” on the left side of the screen and
then press the ⬙Settings⬙ button on the touchscreen.
2. After loading the mobile phonebook, select phonebook
from the Phone main screen, then select the appropriate
number. Press the ⬙Settings⬙ button next to the selected
number to display the options pop-up. In the pop-up
select “Add to Favorites.”
4. The Options pop-up will display, press “Remove from
Favs.”
NOTE: If the Favorites list is full, you will be asked to
remove an existing favorite.
3. From the Phone main screen, select phonebook. From
the phonebook screen, select the “Favorites” button on
the touchscreen and then select the ⬙Settings⬙ button on
the touchscreen located to the right of the phonebook
record.
3. Press the ⬙Settings⬙ button next to the Favorite you
would like to remove.
Phone Call Features
The following features can be accessed through the
Uconnect Phone if the feature(s) are available and supported by Bluetooth on your mobile service plan. For
example, if your mobile service plan provides three-way
calling, this feature can be accessed through the Uconnect
Phone. Check with your mobile service provider for the
features that you have.
UCONNECT 8.4/8.4 NAV 107
Ways To Initiate A Phone Call
Call By Saying A Phonebook Name
Listed below are all the ways you can initiate a phone call
with Uconnect Phone.
1. Push the Phone
begin.
• Redial
2. After the “Listening” prompt and the following beep,
say “Call John Doe Mobile.”
• Dial by pressing in the number
• Voice Commands (Dial by Saying a Name, Call by
Saying a Phonebook Name, Redial or Call Back)
• Favorites
button on your steering wheel to
3. The Uconnect Phone will dial the number associated
with John Doe, or if there are multiple numbers it will
ask which number you want to call for John Doe.
Call Controls
• Mobile Phonebook
• Recent Call Log
The touchscreen allows you to control the following call
features:
• SMS Message Viewer
• Answer
Dial By Saying A Number
• End
1. Push the “Phone”
begin.
• Ignore
button on your steering wheel to
2. After the “Listening” prompt and the following beep,
say “Dial 151-123-4444.”
3. The Uconnect Phone will dial the number 151-123-4444.
• Hold/unhold
• Mute/unmute
• Transfer the call to/from the phone
• Swap two active calls
• Join two active calls together
4
108 UCONNECT 8.4/8.4 NAV
Touch-Tone Number Entry
• Missed Calls
1. Press the “Phone” button on the touchscreen.
These can be accessed by pressing the “recent calls” button
on the Phone main screen.
2. Press the “Dial” button on the touchscreen.
3. The Touch-Tone screen will be displayed.
4. Use the numbered buttons on the touchscreens to enter
the number and press “Call.”
If your vehicle has two buttons on the steering wheel (VR
button on your steering
and Phone), press the VR
wheel to send a touch-tone. If your vehicles has three
buttons on the steering wheel (VR, Phone Send, and
Phone End), press the Phone Send button on your
steering wheel to send a touch-tone and say “Send
1234#” or you can say “Send Voicemail Password” if
Voicemail password is stored in your mobile phonebook.
Recent Calls
You may browse up to 31 of the most recent of each of the
following call types:
• All Calls
• Incoming Calls
• Outgoing Calls
You can also push the
button on your steering wheel
and say “Show my incoming calls” from any screen and
the Incoming calls will be displayed.
NOTE: Incoming can also be replaced with “Outgoing,”
“Recent” or “Missed.”
Answer Or Ignore An Incoming Call — No Call
Currently In Progress
When you receive a call on your mobile phone, the
Uconnect Phone will interrupt the vehicle audio system.
button on the steering wheel to accept
Push the Phone
the call. You can also press the “answer” button on the
touchscreen or press the caller ID box.
Answer Or Ignore An Incoming Call — Call
Currently In Progress
If a call is currently in progress and you have another
incoming call, you will hear the same network tones for
call waiting that you normally hear when using your
button on
mobile phone. Press the “Uconnect Phone”
UCONNECT 8.4/8.4 NAV 109
the steering wheel, answer button on the touchscreen or
caller ID box to place the current call on hold and
answer the incoming call.
While in Do Not Disturb, Conference Call can be selected
so you can still place a second call without being interrupted by incoming calls.
NOTE: The Uconnect Phone compatible phones in the
market today do not support rejecting an incoming call
when another call is in progress. Therefore, the user can
only answer an incoming call or ignore it.
NOTE:
Do Not Disturb
• Reply with text message is not compatible with iPhones.
• Auto reply with text message is only available on
phones that supporting Bluetooth MAP.
With Do Not Disturb, you can disable notifications from
incoming calls and texts, allowing you to keep your eyes
on the road and hands on the wheel. For your convenience,
there is a counter display to keep track of your missed calls
and text messages while you were using Do Not Disturb.
Place/Retrieve A Call From Hold
Do Not Disturb can automatically reply with a text message, a call or both, when declining an incoming call and
send it to voicemail.
You can place a call on hold by pressing the “Hold” button
on the Phone main screen, then dial a number from the
dialpad, recent calls, SMS Inbox or from the phonebooks.
To go back to the first call, refer to “Toggling Between
Calls” in this section. To combine two calls, refer to “Join
Calls” in this section.
Automatic reply messages can be:
• “I am driving right now, I will get back to you shortly.”
• Create a custom auto reply message up to 160 characters.
NOTE: Only the first 25 characters can been seen on the
touchscreen while typing a custom message.
During an active call, press the “Hold” button on the
Phone main screen.
Making A Second Call While Current Call Is In
Progress
4
110 UCONNECT 8.4/8.4 NAV
Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the “Swap” button on the Phone main screen. Only
one call can be placed on hold at a time.
button to toggle between
You can also push the Phone
the active and held phone call.
Join Calls
When two calls are in progress (one active and one on
hold), press the “Join Calls” button on the Phone main
screen to combine all calls into a Conference Call.
Call Termination
To end a call in progress, momentarily press the Phone
button on the touchscreen or the Phone “End”
“End”
button on the steering wheel. Only the active call(s) will
be terminated and if there is a call on hold, it will
become the new active call.
Redial
Press the “Redial” button on the touchscreen, or push the
button and after the “Listening” prompt and
Phone
the following beep, say “Redial.”
The Uconnect Phone will call the last number that was
dialed from your mobile phone.
Call Continuation
Call continuation is the progression of a phone call on the
Uconnect Phone after the vehicle ignition has been
switched to OFF.
NOTE: The call will remain within the vehicle audio
system until the phone becomes out of range for the
Bluetooth connection. It is recommended to press the
“transfer” button on the touchscreen when leaving the
vehicle.
Advanced Phone Connectivity
Transfer Call To And From Mobile Phone
The Uconnect Phone allows ongoing calls to be transferred
from your mobile phone to the Uconnect Phone without
terminating the call. To transfer an ongoing call from your
connected mobile phone to the Uconnect Phone or vice
versa, press the “Transfer” button on the Phone main
screen.
UCONNECT 8.4/8.4 NAV 111
Connect Or Disconnect Link Between The Uconnect
Phone And Mobile Phone
• Low-To-Medium Vehicle Speed
If you would like to connect or disconnect the Bluetooth
connection between a Uconnect Phone paired mobile
phone and the Uconnect Phone, follow the instructions
described in your mobile phone User’s Manual.
• Smooth Road Surface
Things You Should Know About Your Uconnect
Phone
Voice Command
For the best performance:
• Adjust the rearview mirror to provide at least ½ inch
(1 cm) gap between the overhead console (if equipped)
and the mirror.
• Always wait for the beep before speaking.
• Speak normally, without pausing, just as you would
speak to a person sitting a few feet/meters away from
you.
• Ensure that no one other than you is speaking during a
voice command period.
Performance is maximized under:
• Low-To-Medium Blower Setting
• Low Road Noise
• Fully Closed Windows
• Dry Weather Condition
4
WARNING!
ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
related to the use of the Uconnect features and applications in this vehicle. Only use Uconnect when it is
safe to do so. Failure to do so may result in an accident
involving serious injury or death.
Even though the system is designed for many languages
and accents, the system may not always work for some.
NOTE: It is recommended that you do not store names in
your favorites phonebook while the vehicle is in motion.
Phonebook (Mobile and Favorites) name recognition rate is
optimized when the entries are not similar. You can say
“O” (letter “O”) for “0” (zero).
112 UCONNECT 8.4/8.4 NAV
Even though international dialing for most number combinations is supported, some shortcut dialing number
combinations may not be supported.
In a convertible vehicle, system performance may be
compromised with the convertible top down.
Far End Audio Performance
Once your Uconnect system is paired with a compatible
mobile device, the system can announce a new incoming
text message, and read it to you over the vehicle audio
system. You can reply to the message using Voice Recognition, by selecting, or saying one of the 18 pre-defined
messages.
Audio quality is maximized under:
• Low-To-Medium Blower Setting
• Low-To-Medium Vehicle Speed
• Low Road Noise
• Smooth Road Surface
• Fully Closed Windows
• Dry Weather Conditions
• Operation From The Driver’s Seat
Performance such as audio clarity, echo, and loudness to a
large degree rely on the phone and network, and not the
Uconnect Phone.
Echo at the far end can sometimes be reduced by lowering
the in-vehicle audio volume.
Voice Text Reply
and
Here’s how: Push the “Uconnect Phone” button
wait for the beep, then say “reply.” Uconnect will give
the following prompt: “Please say the message you
would like to send.” Wait for the beep and say one of the
pre-defined messages. (If you are not sure, you can say
“help”). Uconnect will then read the pre-defined messages allowed. As soon as you hear the message you
would like to send, you can interrupt the list of prompts
by pushing the “Uconnect Phone” button and saying
the phrase. Uconnect will confirm the message by
reading it back to you. Then push the “Uconnect Phone”
button and say “Send.”
UCONNECT 8.4/8.4 NAV 113
“Yes.”
“No.”
“Call me.”
“Okay.”
“I’ll call you
later.”
“I can’t talk
right now.”
“I’m on my
way.”
“I’ll be late.”
“Thanks.”
“Start without
me.”
“Where
are
you?”
“Stuck in traffic.”
“Are you there yet?”
“See you later.”
“I’m lost.”
“I need directions.”
“See you in <number> minutes.”
“I will be <number>
minutes late.”
Voice Texting Reply and Voice Texting features require a
compatible mobile device enabled with Bluetooth Message
Access Profile (MAP). Some smartphones do not currently
support Bluetooth MAP. Visit UconnectPhone.com for
system and device compatibility.
Voice Texting (Must Be Registered With Uconnect
Access And Have A Current Subscription, U.S.
Residents Only)
WARNING!
ALWAYS drive safely with your hands on the steering wheel. You have full responsibility and assume
all risks related to the use of the Uconnect features
and applications in this vehicle. Only use Uconnect
when it is safe to do so. Failure to do so may result
in an accident involving serious injury or death.
Want to dictate a personal message? Register with
Uconnect Access to take advantage of a new, cloud-based
Voice Texting service, an enhancement to Voice Text Reply.
Voice Texting allows you to compose a new text or reply to
an incoming text message. Before you attempt to use the
Voice Texting feature, check to ensure you have the following:
1. A Paired, Bluetooth enabled phone with the Message
Access Profile (MAP). Not all Bluetooth enabled phones
support MAP. Visit UconnectPhone.com for system
and device compatibility information.
4
114 UCONNECT 8.4/8.4 NAV
2. An active Uconnect Access trial or paid subscription.
” button on the touchscreen to
Press the “Apps
begin the registration process.
3. Accept the Allow MAP profile request on your smart
phone. (Please refer to device manufacturer instructions
for details).
To Send A Text Message:
6. Uconnect will prompt you “Please say the message that
you would like to send” (If you do not hear this prompt,
you may not have an active subscription with Uconnect
Access).
7. Wait for the beep, and then dictate any message up to
140 characters. If you exceed 140 characters, you will
hear the following prompt: “Message was too long; your
message will be truncated.”
1. Push the Uconnect Phone button.
8. Uconnect will then repeat the message back to you.
2. Wait for the beep.
9. Uconnect will prompt you: To add to your message, say
“Continue”; to delete the current message and start
over, say “Start Over”; to send the current message, say
“Send”; to hear the message again, say “Repeat.”
3. Say “Text.”
4. Uconnect will prompt you “Say the phone number, or
full name and phone type of the contact you want to
send a message to.”
5. Wait for the beep and say a contact that is in your
phonebook, or a mobile phone number that you would
like to send the message to.
10. If you are happy with your message and would like to
send it, wait for the beep and say “Send.”
11. Uconnect will then say “Sending your message.”
UCONNECT 8.4/8.4 NAV 115
Sample Commands for Voice Text Reply and Voice Texting
Example Command
Action
“Text John Smith”
Send a message to specific contact in address book
“Text 123 - 456 - 7890”
Send 123 - 456 - 7890 a message from your phonebook
“Show messages”
See recent text messages listed by number on Uconnect
screen
“Listen to/view (message number four, for example)”
Hear messages or read it on Uconnect screen
“Reply”
Send a voice text reply to a current message
“Forward text/message to John Smith”
Forward current text to specific contact in address book
“Forward text/message to 123 - 456 - 7890”
Forward current text to specific phone number
4
116 UCONNECT 8.4/8.4 NAV
Bluetooth Communication Link
NAVIGATION
Mobile phones have been found to lose connection to the
Uconnect Phone. When this happens, the connection can
generally be re-established by switching the mobile phone
OFF/ON. Your mobile phone is recommended to remain in
Bluetooth ON mode.
Main Menu
To access the Navigation system, press the ⬙Nav⬙ button on
the touchscreen.
Power-Up
After switching the ignition key from OFF to either the ON
or ACC position, or after a language change, you must wait
at least 15 seconds prior to using the system.
General Information
This device complies with Part 15 of the FCC rules and RSS
210 of Industry Canada. Operation is subject to the following conditions:
• Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.
• Press “Where To?” to find or route to a destination.
• Press “View Map” to view the map.
• Press “Information” to view Traffic, Where Am I? and
Trip Computer information.
UCONNECT 8.4/8.4 NAV 117
• Press “Emergency” to search for Hospitals, Police and
Fire Stations near your current location. You can also
display your current location and save any Emergency
facility location to your Favorites.
Where To?
Where To? — Main Menu
• Press “Stop” to stop a route.
• Press “Detour” to detour a route.
4
From the Nav Main Menu, press the “Where To?” button
on the touchscreen and select one of the following methods
to program a route guidance.
NOTE: Refer to the individual section of the chosen option
for further information.
Address
Press this button on the touchscreen to search by a street
address or a street name with house number.
118 UCONNECT 8.4/8.4 NAV
Recent
GEO Coordinates
Press this button on the touchscreen to access previously
routed addresses or locations.
Press this button on the touchscreen to route to a GEO
Coordinate. A geo coordinate is a coordinate used in
geography. You can determine a geo coordinate with the
help of a handheld GPS receiver, a map, or the navigation
system.
Point of Interest
Press this button on the touchscreen when you want to
route to a point of interest. The Point of Interest (POI)
database allows you to select a destination from a list of
locations and public places, or points of interest.
Favorites
Press this button on the touchscreen to access previously
saved addresses or locations.
Intersection
Point on Map
Press this button on the touchscreen to select a destination
directly from the Map screen. By selecting a street segment
or icon, you can quickly enter a destination without the
need to input the city name or street.
City Center
Press this button on the touchscreen to enter in two street
names as a destination.
Press this button on the touchscreen to route to a particular
city. The navigation system will calculate a route with the
destination at the center of the city.
Go Home
Trails
Press this button on the touchscreen to program or confirm
a route to the saved home address.
Press the “Trails” button on the touchscreen and select the
option to start trail recording to track the route you are
driving. Select the option to ⬙stop trail recording⬙ to end
tracking. This gives you a point of reference to for a
particular route if needed.
Trips
Press this button on the touchscreen to program a new trip
or recall a saved trip.
UCONNECT 8.4/8.4 NAV 119
Closest City
Where To? — Address
Press this button on the touchscreen to route to a nearby
city. The screen will display an alphabetical listing of
nearby cities. The navigation system will calculate a route
with the destination at the center of the nearby city.
To enter a destination by Address, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen, then press the “Address”
button on the touchscreen.
Phone Number
Press this button on the touchscreen to route to a location
or point of interest by the phone number.
NOTE: You can press the “back” arrow button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
4
120 UCONNECT 8.4/8.4 NAV
2. Press “Enter City” or “Enter Street” to begin entering
the address of your destination.
If you press “Enter City,” you will have to enter and
select/press the desired city name, followed by the
desired street name then the house number.
If you press “Enter Street,” you will have to enter and
select/press the desired street name in the correct city
and then you will have to enter the house number.
To change the state and/or country, press the “state,
country” button on the touchscreen and follow the
prompts to change the state and/or country.
Once the correct City, Street and Number has been
entered, you will be asked to confirm your destination
by pressing “OK.”
UCONNECT 8.4/8.4 NAV 121
3. Press the “GO!” button on the touchscreen to confirm
your destination and begin your route.
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Where To? — Recent
To route to a Recent destination, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen, then press the “Recent”
button on the touchscreen.
If you are currently on a route guidance and you select
Recent, the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
4
122 UCONNECT 8.4/8.4 NAV
2. Press the button on the touchscreen with the name of the
desired destination.
3. Confirm the route with “Yes” to start the route guidance.
To delete a destination from the list, press the “Trash
Can Icon” button on the touchscreen.
To display the options for a destination press the “Options” button on the touchscreen that looks like a gear.
UCONNECT 8.4/8.4 NAV 123
The following Options are available for each destination:
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Where To? — Point of Interest
To enter a destination by Point of Interest (POI), press the
“Where To?” button from the Nav Main Menu, then press
the “Point of Interest” button on the touchscreen.
• Edit Name
• Add Phone Number
• Move Up in the list
• Move Down in the list
• Place Pin on the location (saves the spot on the list)
The Point of Interest database allows you to select a
destination from a list of locations and public places, or
points of interest.
4
124 UCONNECT 8.4/8.4 NAV
You have the following POIs to choose from:
• Gas Stations
• Restaurants
• Hotels/Motels
• ATM/Banking
• All POIs
• Spell POI Name
You can also change your POI search area, by pressing the
“Change Search Area” button on the touchscreen. You will
have the following options to change your search area:
• Around Me
• In a City
• Near Destination (only available during route guidance)
• Along Route (only available during route guidance)
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
UCONNECT 8.4/8.4 NAV 125
POI — Gas Stations
To select a Gas Station POI, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen, then press the “Point of
Interest” button on the touchscreen.
4
2. Press the “Gas Stations” button on the touchscreen.
You can search for a gas station by the following
categories, which are button tabs at the top of the screen.
• Name
• Distance
• Type
• ABC (Search)
126 UCONNECT 8.4/8.4 NAV
POI — Restaurants
To select a Restaurant POI, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen, then press the “Point of
Interest” button on the touchscreen.
3. Press the desired Gas Station and press “Yes” to confirm
the destination.
If you are currently on a route guidance and you select a
gas station, the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
UCONNECT 8.4/8.4 NAV 127
2. Press the “Restaurants” button on the touchscreen.
3. Press the desired Restaurant and press “Yes” to confirm
the destination.
If you are currently on a route guidance and you select a
Restaurant, the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
You can search for a restaurants by the following
categories, which are button tabs at the top of the screen.
• Name
• Distance
• Type
• ABC (Search)
POI — Hotels/Motels
To select a Hotel or Motel POI, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen, press the “Point of Interest”
button on the touchscreen.
4
128 UCONNECT 8.4/8.4 NAV
You can search for a hotel or motel by the following
categories, which are button tabs at the top of the screen.
• Name
• Distance
• Type
• ABC (Search)
3. Press the desired hotel or motel and press “Yes” to
confirm the destination.
2. Press the “Hotels/Motels” button on the touchscreen.
If you are currently on a route guidance and you select a
Hotel or Motel, the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
UCONNECT 8.4/8.4 NAV 129
POI — ATM/Banking
To select a ATM or Bank POI, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen, then press the “Point of
Interest” button on the touchscreen.
4
2. Press the “ATM/Banking” button on the touchscreen.
You can search for an ATM or Bank by the following
categories, which are button tabs at the top of the screen.
• Name
• Distance
• Type
• ABC (Search)
130 UCONNECT 8.4/8.4 NAV
3. Press the desired ATM or Bank and press “Yes” to
confirm the destination.
If you are currently on a route guidance and you select an
ATM or Bank POI, the system will ask you to choose one of
the following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
All POIs
To select a POI type, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen, then press the “Point of
Interest” button on the touchscreen.
2. Press “All POIs” button on the touchscreen.
UCONNECT 8.4/8.4 NAV 131
You can search through the available POI categories to
find your desired POI.
The available categories are:
• Airport
• ATM/Banking
• Automotive
• Coffee Shops
• Community
• Entertainment
• Gas Stations
• Health and Beauty
• Highway Exit
• Hospital
• Hotels/Motels
• Other
• Parking
• Recreation
• Restaurants
• Shopping
• Travel
• Truck
4
3. Select a category and then select a subcategory if necessary. Press the “ABC” button on the touchscreen to
activate a keyboard with Alphabetic characters to search
within the POI categories.
4. Press the desired POI and press “Yes” to confirm the
destination.
If you are currently on a route guidance and you select a
POI, the system will ask you to choose one of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
132 UCONNECT 8.4/8.4 NAV
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
POI — Spell Name
To select for a specific POI, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen, then press the “Point of
Interest” button on the touchscreen.
3. A keyboard will appear on the screen. Type in the POI
that you want to search and press the “List” button on
the touchscreen to display available items.
4. Press the desired POI and press “Yes” to confirm the
destination.
If you are currently on a route guidance and you select a
POI, the system will ask you to choose one of the following:
• Cancel previous route
2. Press the “Spell Name” button on the touchscreen.
• Add as first destination
• Add as last destination
UCONNECT 8.4/8.4 NAV 133
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Where To? — Favorite Destinations
To route to a Favorite destination, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen, then press the “Favorites”
button on the touchscreen.
3. To delete a destination from the list, press the “Trash
Can Icon” button on the touchscreen.
4. To save a favorite destination, press the “Add Favorite”
button on the touchscreen and follow the steps to route
a destination.
5. To display the options for a favorite destination press
the “Options” button on the touchscreen that looks like
a gear.
The following Options are available for each favorite
destination:
• Edit Name
• Add Phone Number
If you are currently on a route guidance and you select a
Favorite, the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
2. Press the button on the touchscreen with the name of the
desired favorite destination and confirm the route with
Yes to start the route guidance.
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
4
134 UCONNECT 8.4/8.4 NAV
Where To? — Intersection
To enter a destination by Intersection, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen, then press the “Intersection”
button on the touchscreen.
3. Once the correct City has been selected, you will be
asked to spell the desired street name, then enter the
intersecting street.
2. Press the “Enter City” button, to enter the desired city
name.
NOTE: If the system automatically recognizes the city it
will populate a list of recognized cities, if not press the
“List” button to select from the available options.
NOTE: If the system automatically recognizes the street it
will populate a list of recognized streets, if not press the
“List” button to select from the available options.
4. Press the “Yes” button on the touchscreen to confirm
your destination and begin your route.
UCONNECT 8.4/8.4 NAV 135
If you are currently on a route guidance and you select a
Intersection, the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
4
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Where To? — Go Home
To enter your Home Address, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “Go Home”
button on the touchscreen.
If there is no Home Address entered, press “Yes” to
enter it now.
2. To set your Home Address choose one of the following
options:
136 UCONNECT 8.4/8.4 NAV
NOTE: Refer to the individual section of the chosen option
for further information.
• Address
• Recent
• Point of Interest
• Favorites
• Intersection
• GEO Coordinates
• Point on Map
• City Center
• Closest Cities
• Phone Number
Once you have generated your Home Address, you will be
asked to Save it.
3. Press the “Save” button on the touchscreen to confirm
your destination and begin the route to your Home
Address.
4. This address will be saved as your Home Address and it
can be accessed by pressing the “Go Home” button in
the Where To? Menu.
Change/Delete Your Home Address
To change or delete your current Home Address perform
the following:
1. Press the “Go Home” button in the Where To? Menu.
2. Press the “Options” button at the bottom of the displayed map.
3. Press “Clear Home” and then press “Yes” to clear/
delete your Home Address.
4. To enter in a new Home Address, follow the Where To?
– Go Home procedure.
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Where To? — Trips
To route to a saved Trip, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “Recent”
button on the touchscreen.
UCONNECT 8.4/8.4 NAV 137
3. Press the button on the touchscreen with the name of the
desired Trip and press the first destination in the list.
4. Confirm the route by pressing “Yes” to start the route
guidance.
To add a Trip, follow these steps:
1. Press the “Create new Trip” button on the touchscreen.
2. Type in the new Trip Name.
3. Press “Add Destination” to add destinations to your
trip.
2. Press the “Trips” button on the touchscreen.
4. Choose from the following options to add a destination
• Address
• Recent
• Point of Interest
• Favorites
• Intersection
• GEO Coordinates
• Point on Map
• City Center
• Closest Cities
• Phone Number
4
138 UCONNECT 8.4/8.4 NAV
NOTE: Refer to the individual section of the chosen option
for further information.
Where To? — GEO Coordinate
5. Add more needed destinations to your trip.
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “GEO Coordinate” button on the touchscreen.
NOTE: Each destination will be listed in order, with the
last destination being the final destination.
To route to a saved Trip, follow these steps:
6. Your new Trip will appear on the Trips list.
To delete a Trip from the list, press the “Trash Can Icon”
button on the touchscreen.
To display the options for a trip press the “Options” button
on the touchscreen that looks like a gear.
The following Options are available for each trip:
• Edit Name
• Move Up in the list
• Move Down in the list
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
2. Enter the Latitude by typing in the numbers. Use the left
and right arrows to select specific numbers in the
location shown.
UCONNECT 8.4/8.4 NAV 139
6. Press the “Yes” button on the touchscreen to confirm
your destination and begin your route.
If you are currently on a route guidance and you select a
Geo Coordinate, the system will ask you to choose one of
the following:
• Cancel previous route
• Add as first destination
• Add as last destination
Press the “Format” button on the touchscreen to change
the format of the Latitude/Longitude entry.
3. Press the “OK” button on the touchscreen.
4. Enter the Longitude by typing in the numbers. Use the
left and right arrows to select specific numbers in the
location shown.
5. Press “OK” to confirm the destination.
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Where To? — Point on Map
To enter a destination by Point on Map, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “Point on
Map” button on the touchscreen.
4
140 UCONNECT 8.4/8.4 NAV
2. Use the touchscreen to drag the center of the cross over
the desired destination.
3. Either press the “address bar” at the top center of the
screen to confirm your location, or press the “Details”
button in the upper right corner to display the available
locations near that point on the map.
4. Press the “Yes” button on the touchscreen to confirm
your destination and begin your route.
UCONNECT 8.4/8.4 NAV 141
If you are currently on a route guidance and you select a
Point on Map, the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
4
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Where To? — City Center
To enter a destination by City Center, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “City Center”
button on the touchscreen.
2. Enter the name of the City you would like to route to.
142 UCONNECT 8.4/8.4 NAV
3. Press the desired city from the list.
4. Press the “Yes” button on the touchscreen to confirm
your destination and begin your route.
If you are currently on a route guidance and you select a
City Center, the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Where To? — Closest Cities
To enter a destination by Closest City, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “Closest City”
button on the touchscreen.
2. Press the desired city from the list.
UCONNECT 8.4/8.4 NAV 143
3. Press the “Yes” button on the touchscreen to confirm
your destination and begin your route.
If you are currently on a route guidance and you select a
Closest City, the system will ask you to choose one of the
following:
• Cancel previous route
4
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Where To? — Trails
When starting to drive a trail you want to record, follow
these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “Trails” button
on the touchscreen.
2. Press “Start Trail Recording.”
144 UCONNECT 8.4/8.4 NAV
3. When you want to end the recording of a route, press
“Stop Trail Recording.”
2. Enter the Phone Number of the destination you would
like to route to.
The trip you recorded will be added to the Recent Trails
list.
3. Press the desired destination from the list.
Where To? — Phone
To enter a destination by Phone number, follow these steps:
1. While in the Nav Main Menu, press the “Where To?”
button on the touchscreen then press the “Phone Number” button on the touchscreen.
4. Press the “Yes” button on the touchscreen to confirm
your destination and begin your route.
If you are currently on a route guidance and you select a
Phone number destination, the system will ask you to
choose one of the following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Before Route Guidance
Before confirming the route with the “Yes” button on the
touchscreen, it is possible to select options different from
the default route settings.
UCONNECT 8.4/8.4 NAV 145
• Options – Press the “Options” button on the touchscreen
to display a list of options to alter your route. To make a
selection press and release the desired setting until a
check-mark appears.
4
• Avoid – Press the “Avoid” button on the touchscreen to
choose road types to avoid during your route. To make
a selection press and release the desired setting until a
check-mark appears.
146 UCONNECT 8.4/8.4 NAV
NOTE: Since toll roads, tunnels and ferries are built for the
purpose of shortening travel distances, avoiding these road
types may increase distance and travel time.
• Save – Press the “Save” button on the touchscreen to
save the destination as a Favorite.
Press the “Yes” button on the touchscreen to confirm your
destination and to start your route guidance.
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
View Map
View Map — Main Menu
Press the “View Map” button from the Nav Main Menu to
display a map of your current position.
UCONNECT 8.4/8.4 NAV 147
Time of Arrival/Time to Destination/Distance (only during route guidance)
Press the button in the upper right area of the screen to the
display items available. Press the desired option button on
the touchscreen.
• Time of Arrival
• Time to Destination
• Distance
Turn List (only during route guidance)
With the map displayed you have the following features
available:
Menu
Press this button on the touchscreen to return to the Nav
Main Menu.
Zoom In +/Zoom Out –
Press the “Zoom In (+) or Zoom Out (–)” buttons on the
touchscreen to change the zoom level. Roads with lower
functional classification are not shown in higher zoom
levels. (e.g. residential streets, lightly-traveled county
roads.)
Press the area in the upper center part of the screen that
displays your next turn to see a Turn List for your current
route.
Press a turn in the displayed Turn List for the following
options:
• Show on Map
• Avoid Street
Options (only during route guidance)
Press the “Options” button on the touchscreen to display
the following options. Press the desired button on the
touchscreen.
4
148 UCONNECT 8.4/8.4 NAV
• 2D North Up/Map View 2D/Map View 3D (3D Available On 8.4 NAV)
Press this button on the touchscreen to scroll between the
three viewing options.
• Settings
Press this button on the touchscreen to view all the
available settings. See View Map – Settings for more
information.
• Repeat
Press this button on the touchscreen to repeat the current
voice prompt.
• Turn List
Press this button on the touchscreen to view the turn list for
the current route.
• Stop Guidance
Press this button on the touchscreen to stop route guidance.
Where Am I?
Press the area in the lower center part of the screen that
displays your current location to view the Where Am I?
view.
Where Am I? displays the address and GEO Coordinates of
your current location.
• Press the “GPS” button on the touchscreen to view the
GPS information.
• Press the “Save” button on the touchscreen to save the
location in your Favorites.
UCONNECT 8.4/8.4 NAV 149
You can press the “back” arrow button on the touchscreen
to return to the previous screen or the “X” button on the
touchscreen to exit.
View Map — Settings
With the Map displayed, press the “Options” button on the
touchscreen then press the “Settings” button on the touchscreen.
4
The following Map Settings are available:
• Map Setup — Press this button on the touchscreen to
display items to customize how your map is viewed.
Settings – Map Setup for more information.
• Speed Limit — Press this button on the touchscreen to
turn on/off speed limit warning announcements and to
enter a pre-defined speed limit for your route.
• Guidance — Press this button on the touchscreen to
display items to customize your route guidance. Settings
– Guidance Options for more information.
150 UCONNECT 8.4/8.4 NAV
• Units — If Equipped — Press this button on the
touchscreen to change the units display. Press the desired button on the touchscreen.
• U.S. (mile/feet)
• Imperial (mile/yard)
• Metric (meter)
• GPS (DMS) — Press this button on the touchscreen to
change the GPS display. Press the desired button on the
touchscreen.
• Decimal
• DMS
• DM
Copy device information to USB? (If Equipped) — Press
this button on the touchscreen to copy your radio information to a USB jump drive through the available USB port.
Settings — Map Setup
With the Map displayed, press the “Options” button on the
touchscreen, then press the “Settings” button on the touchscreen and then the “Map Setup” button on the touchscreen.
The following Map Setup options are available:
UCONNECT 8.4/8.4 NAV 151
Map View
Destination Information
Press this button on the touchscreen to change how the
Map View is displayed. Press the desired button on the
touchscreen.
Press this button on the touchscreen to change the Destination Information that is displayed in the upper right
corner of the Map View. Press the desired button on the
touchscreen.
• 3D (3D Map View Is Only Available On Uconnect
8.4 NAV. Must Select 3D City Models Or 3D Landmarks
For 3D Map View To Display.)
• 2D
Orientation
Press this button on the touchscreen to change how the
Map Orientation is displayed. Press the desired button on
the touchscreen.
• North Up
• Heading Up
• Time of Arrival
• Time to Destination
• Distance
AutoZoom
Press this button on the touchscreen to change how the
AutoZoom feature adjust the zoom level during guidance
in Map View. Press the desired button on the touchscreen.
• Far
• Normal
Current Street
• Near
Press this button on the touchscreen to turn on/off the
current street display on the lower center of the Map View.
Press and release the button on the touchscreen until a
check-mark appears, showing the setting has been selected.
• Off
Vehicle Icon
Press this button on the touchscreen to change the vehicle
icon that is displayed while in Map View. Press Previous or
4
152 UCONNECT 8.4/8.4 NAV
Next to view the available icons. Press the back icon button
on the touchscreen when you’ve made you selection.
Show POI Icons
Press this button on the touchscreen to show the selected
Point of Interest icons while in Map View. Press and release
the button on the touchscreen until a check-mark appears,
showing the setting has been selected.
POI Icon List
Press this button on the touchscreen to display the available Point of Interest icons you would like displayed while
in Map View. Press and release the desired selection button
on the touchscreen until a check-mark appears, showing
the setting has been selected.
TMC Incidents – If Equipped
Press this button on the touchscreen to show Traffic Message Channel (TMC) Incidents while in Map View. Press
and release the button on the touchscreen until a checkmark appears, showing the setting has been selected.
Speed and Flow
Press this button on the touchscreen to show the Speed and
Flow of traffic while in Map View. Press and release the
button on the touchscreen until a check-mark appears,
showing the setting has been selected.
3D City Models (Available On The Uconnect 8.4 NAV)
Press this button on the touchscreen to display 3D city
models while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the
setting has been selected.
3D Landmarks (Available On The Uconnect 8.4 NAV)
Press this button on the touchscreen to display 3D landmarks while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the
setting has been selected. Next, change Map View to 3D by
selecting Navigation Options - Settings - Map Setup - Map
View.
Digital Terrain Model (8.4 NAV Only)
Press this button on the touchscreen to display the areas
terrain while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the
setting has been selected.
UCONNECT 8.4/8.4 NAV 153
Park Areas
Press this button on the touchscreen to display Park Areas
while in Map View. Press and release the button on the
touchscreen until a check-mark appears, showing the setting has been selected.
Railroads
Press this button on the touchscreen to display Railroad
tracks while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the
setting has been selected.
You can press the “back arrow” button on the touchscreen
to return to the previous screen or the “X” button on the
touchscreen to exit.
Settings — Guidance
With the Map displayed, press the “Options” button on the
touchscreen, then press the “Settings” button on the touchscreen and then the “Guidance” button on the touchscreen.
You can also access this menu by pressing the “Settings”
button in the lower right of the Nav Main Menu.
The following Guidance options are available.
City Areas
• Play Voice Guidance Prompts
Press this button on the touchscreen to display City Areas
while in Map View. Press and release the button on the
touchscreen until a check-mark appears, showing the setting has been selected.
Press this button on the touchscreen to enable Voice
Guidance Prompts during route guidance. Press and release the button on the touchscreen until a check-mark
appears, showing the setting has been selected.
River Names
• Nav Volume Adjustment
Press this button on the touchscreen to display River
Names while in Map View. Press and release the button on
the touchscreen until a check-mark appears, showing the
setting has been selected.
Press the “+” or “–” buttons on the touchscreen to adjust
the Nav Voice Prompt Volume.
4
154 UCONNECT 8.4/8.4 NAV
NOTE: If the NAV Volume Adjustment setting is set
between level 0 and 11 it will default to level 12 on a vehicle
restart, if the NAV Volume Adjustment setting is set
between level 13 and 38 it will RETAIN the setting on a
vehicle restart.
• Lane Recommendation
Press this button on the touchscreen to enable Lane Recommendation during route guidance. Press and release the
button on the touchscreen until a check-mark appears,
showing the setting has been selected.
• TMC Route Mode (If Equipped)
Press this button on the touchscreen to change how the
Traffic Message Channel (TMC) Route Mode functions
during route guidance. Select from:
– Automatic
– By Delay Time
– Manual
– Off
• TMC Avoidance Types (If Equipped)
Press this button on the touchscreen to enable Junction
View during route guidance. Press and release the button
on the touchscreen until a check-mark appears, showing
the setting has been selected.
Press this button on the touchscreen to display the available Traffic Message Channel (TMC) Avoidance Types you
would like displayed while in route guidance. Press and
release the desired selection button on the touchscreen
until a check-mark appears, showing the setting has been
selected.
• Navigation Turn-by-Turn Displayed In Cluster
• Avoid
Press this button on the touchscreen to enable navigation
turn-by-turn displayed in vehicles cluster during route
guidance. Press and release the button on the touchscreen
until a check-mark appears, showing the setting has been
selected.
Press the Avoid button on the touchscreen to choose road
types to avoid during your route. To make a selection press
and release the desired setting until a check-mark appears.
• Junction View
UCONNECT 8.4/8.4 NAV 155
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Information — SiriusXM Traffic (U.S. MARKET
8.4 NAV ONLY)
Information
1. While in the Nav Main Menu, press the “Information”
button on the touchscreen.
From the Nav Main Menu, press the “Information” button
on the touchscreen and select one of the following options
to view additional information.
To select SiriusXM Traffic information, follow these steps:
2. Press the “Traffic” button on the touchscreen.
• Traffic
• Where Am I?
• Trip Computer
Traffic displays detailed traffic information, refer to
SiriusXM Traffic in this section for further information.
4
156 UCONNECT 8.4/8.4 NAV
To select “Where Am I?” information, follow these steps:
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
1. While in the Nav Main Menu, press the “Information”
button on the touchscreen.
Information — Trip Computer
Information — Where Am I?
2. Press the “Where Am I?” button on the touchscreen.
To select “Trip Computer” information, follow these steps:
1. While in the Nav Main Menu, press the “Information”
button on the touchscreen.
2. Press the “Trip Computer” button on the touchscreen.
Where Am I? displays the address and GEO Coordinates of your current location.
3. Press the “GPS” button on the touchscreen to view the
GPS information.
4. Press the “Save” button on the touchscreen to save the
location in your Favorites.
Trip Computer displays the following trip information
from your last trip:
• Travel Direction
UCONNECT 8.4/8.4 NAV 157
• Distance to final Destination
• Vehicle Speed
• Distance Traveled
• Overall average speed
• Moving average speed
• Maximum speed reached
• Total time traveled
• Travel time spent moving
• Travel time spent stopped
• Fire Department – Search and route a Fire Department
close to your current location
4
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Emergency
Emergency — Main Menu
From the Nav Main Menu, press the “Emergency” button
on the touchscreen and press one of the following options
to search and route to a specific location.
• Hospital – Search and route to a Hospital close to your
current location
• Police – Search and route to a Police Station close to your
current location
Press the “Location” button on the touchscreen to display
your exact current location.
Press the “Save” button on the touchscreen to save your
current location in Favorites.
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
158 UCONNECT 8.4/8.4 NAV
Emergency — Hospital
To search for a Hospital close to your current location,
follow these steps:
1. While in the Nav Main Menu, press the “Emergency”
button on the touchscreen.
You can search for a Hospital by the following categories, which are button tabs at the top of the screen.
• Name
• Distance
• ABC (Search)
2. Press the “Hospital” button on the touchscreen.
NOTE: In case of emergency, please contact the facility to
verify their availability before proceeding.
3. Press the desired Hospital and press “Yes” to confirm
the destination.
UCONNECT 8.4/8.4 NAV 159
If you are currently on a route guidance and you select a
Hospital the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
4
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Emergency — Police
To search for a Police Station close to your current location,
follow these steps:
1. While in the Nav Main Menu, press the “Emergency”
button on the touchscreen.
2. Press the “Police” button on the touchscreen.
160 UCONNECT 8.4/8.4 NAV
You can search for a Police Station by the following
categories, which are button tabs at the top of the screen.
• Name
• Distance
• ABC (Search)
Emergency — Fire Department
To search for a Fire Department close to your current
location, follow these steps:
1. While in the Nav Main Menu, press the “Emergency”
button on the touchscreen.
NOTE: In case of emergency, please contact the facility to
verify their availability before proceeding.
3. Press the desired Police Station and press “Yes” to
confirm the destination.
If you are currently on a route guidance and you select a
Police Station the system will ask you to choose one of the
following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
2. Press the “Fire Department” button on the touchscreen.
UCONNECT 8.4/8.4 NAV 161
If you are currently on a route guidance and you select a
Fire Department the system will ask you to choose one of
the following:
• Cancel previous route
• Add as first destination
• Add as last destination
NOTE: You can press the “back arrow” button on the
touchscreen to return to the previous screen or the “X”
button on the touchscreen to exit.
Map Updates
You can search for a Fire Department by the following
categories, which are button tabs at the top of the screen.
• Name
• Distance
• ABC (Search)
NOTE: In case of emergency, please contact the facility to
verify their availability before proceeding.
3. Press the desired Fire Department and press “Yes” to
confirm the destination.
The map data available in your vehicle is the most up-todate information that was available when your vehicle was
built. Map data is updated periodically as map information
changes. Follow the steps below if you wish to obtain an
update for your vehicle.
4
162 UCONNECT 8.4/8.4 NAV
1. Depending on the vehicle you own, please visit
www.Chrysler.com, www.Jeep.com, www.Dodge.com,
www.ramtrucks.com, or www.drivesrt.com to obtain
your map update. Click the “Owners” tab at the top of
the page. At the bottom of the page (website footer)
under “Multimedia Systems” select NAVTEQ Navigation Updates. Simply enter your information and place
your order.
2. Or, visit DriveUconnect.com and follow these steps:
• Under the “Help & Support” tab, select your vehicle
brand. Click “NAVTEQ NAVIGATION UPDATES.”
Simply enter your information and place your order.
3. Or, if you wish, you can also visit your dealer or place a
phone call to request your Map Update. US/CAN
General Consumer Support:
888-628-6277
FCA US LLC Dealer Garmin Support:
877-628-4480
FCA US LLC Consumer FreshMaps
866-422-8171
UCONNECT THEATER — IF EQUIPPED
Uconnect Theater Overview
Your Uconnect Theater is designed to give your family
years of enjoyment.
There are multiple ways to interact with your Uconnect
Theater system.
• Play your favorite CDs, DVDs or Blu-ray Discs
• Plug and play a variety of standard video games or
devices into the HDMI port
• Listen to audio over the wireless headphones
• Plug and play a variety of devices into the Video USB
port
• Plug in standard headphones to listen to audio
UCONNECT 8.4/8.4 NAV 163
Getting Started
Accessing The System From The Uconnect Radio
4
1 — Uconnect Theater Touchscreen
2 — Uconnect Radio
3 — Uconnect Theater Media Hub
There are three different ways to operate the features of the
Uconnect Theater:
• The Remote Control
• The Touchscreen Radio
• The Individual Video Screens
You can access your Uconnect Theater system from the
radio touchscreen following the steps below:
1. Press the “Media” button.
2. Press the “Uconnect Theater” button icon.
164 UCONNECT 8.4/8.4 NAV
• Lock one or both screens
Uconnect Theater Controls
• Mute an individual screen or both screens
• Turn On/Off one or both screens
• Select APPS
• View media while gear selector is in Park
1
2
3
4
5
—
—
—
—
—
Power All
Mute All
Lock All
Source Drop Down List
Lock On/Off current screen
6 — Mute On/Off current
screen
7 — Power On/Off current
screen
Parents can control certain features of the system with the
“Uconnect Theater Controls” screens, right from the
Uconnect touchscreen radio. Options are:
• Change media sources
Press this button and use the “Listen In” feature to listen to
audio through cabin speakers.
UCONNECT 8.4/8.4 NAV 165
Accessing The System From The Uconnect
Theater Rear Screens
You can also access your Uconnect Theater system from the
rear screens from the steps below:
1. Lift screen upward, the system will automatically power
on.
NOTE: A message asking if you would like to pair a
remote will pop up if one has not already been paired to
the system.
2. If “YES” is selected to Pair a Remote, Pairing will
immediately start.
3. If “NO” is selected, the Uconnect Theater home screen
will pop up.
NOTE:
• There will be a touchscreen notification message when
pairing is successful. Repeat the above steps to pair the
second remote.
• Test to make sure the remote is successfully paired by
dragging your finger across the gesture pad. If you do
not see the on screen arrow, try using the “Screen”
button to switch between screen one and screen two to
make sure the remote is controlling the intended screen.
• If remote is ever non-operational, try pairing remote.
icon
When watching a video source, pushing “Settings”
on the touchscreen activates the Settings menu. These
settings control the appearance of the video on the
screen. The factory default settings are already set for
optimum viewing, so there is no need to change these
settings under normal circumstances.
To change the settings, use one of the touchscreens. To reset
all values back to the original settings, select the “Reset to
Defaults” then select “YES.”
4
166 UCONNECT 8.4/8.4 NAV
NOTE:
Pairing The Remote
• There will be a touchscreen notification message when
pairing is successful/unsuccessful. Repeat the above
steps to pair the second remote.
• Test to make sure the remote is successfully paired by
dragging your finger across the gesture pad. If you do
not see the on screen arrow, try using the “Screen”
button to switch between screen one and screen two to
make sure the remote is controlling the intended screen.
• If remote is ever non-operational, try pairing remote.
• The system can accommodate up to 10 paired remote
controls.
If the remote needs to be paired to your Uconnect Theater
system, follow the procedure below:
1. Press the “Settings”
icon on the touchscreen.
2. Press the “Remote” button on the touchscreen in the
settings menu.
3. Select “Pair Remote” and follow the on screen instructions to complete the pairing process.
Unpairing The Remote
In events such as updating the Uconnect Theater software,
or taking a remote to another vehicle, the remote will need
to be unpaired from your Uconnect Theater system. To
unpair the remote, follow the procedure below:
1. Select “Manage Remote Controls” from the Remote
section of ⬙Settings” and follow the on screen instructions to complete the unpairing process.
UCONNECT 8.4/8.4 NAV 167
2. Push and hold the “Screen”, “Down Arrow”, and
“Play/Pause” buttons for 5 seconds, or until the remote
screen indicator light flashes.
3. Once complete, the remote will be ready to pair again.
NOTE: There will be a touchscreen notification message
when unpairing is successful. Repeat the above steps to
unpair a second remote.
Media Sources
1 – Available Sources Screen 1
2 – USB Source Playing Screen 2
Users can select content for each screen from the radio by
choosing desired content from drop down menu.
NOTE: Use the “View Screen” function to pull content
from one screen to the other in a single press of a button.
Doing this however will disable and gray out certain
player controls on the screen viewing the other screen’s
content.
Uconnect Theater Remote Control
1. Gesture Pad — Control mouse pointer position in this
area to move and select items on the touchscreen,
functions similar to a mouse.
4
168 UCONNECT 8.4/8.4 NAV
2. Mute Button — Mutes headphone audio.
3. Home Button — Push to access “Sources”.
buttons
4. Arrow Buttons — Push the arrow
to highlight an item or scroll through menus.
5. Fast Forward Button
— Push and hold to fast
forward through the current audio track or video
chapter. Push once to skip to the next track.
6. Play/Pause Button
disc play.
11. Power Button — Turns the screen and wireless headphone transmitter for the selected Channel on or off.
12. Screen Indicator — Indicates which screen (1 or 2) is
being controlled by the remote control when a button is
pushed.
Pairing The Remote
|| — Begin/resume or pause
7. Fast Rewind Button
— Push and hold to fast
rewind through the current audio track or video
chapter. Push once to revert back to the previous
track.
8. OK Button — Push to select the highlighted option in a
menu.
9. Screen Selector Button — Push the screen selector to
toggle between screen 1 (Driver Side), or screen 2
(Passenger Side).
10. Back Button — Push to exit out of menus or return to
previous screen.
If the remote needs to be paired to your Uconnect Theater
system, follow the procedure below:
1. Press the “Settings”
icon on the touchscreen.
UCONNECT 8.4/8.4 NAV 169
2. Press the “Remote” button on the touchscreen in the
settings menu.
3. Select “Pair Remote” and follow the on screen instructions to complete the pairing process.
NOTE:
• There will be a touchscreen notification message when
pairing is successful/unsuccessful. Repeat the above
steps to pair the second remote.
• Test to make sure the remote is successfully paired by
dragging your finger across the gesture pad. If you do
not see the on screen arrow, try using the “Screen”
button to switch between screen one and screen two to
make sure the remote is controlling the intended screen.
• If remote is ever non-operational, try pairing remote.
• The system can accommodate up to 10 paired remote
controls.
Replacing The Remote Control Batteries
Each remote control requires two AAA batteries for operation.
NOTE: Perchlorate Material — special handling may apply. Visit dtsc.ca.gov/hazardouswaste/perchlorate
To replace the batteries:
1. Locate the battery compartment on the back of the
remote, then slide the battery cover downward.
2. Remove the old batteries and follow battery recycling
procedures for your area.
3. Install new batteries, making sure to orient them according to the polarity diagram shown inside the battery
compartment.
4. Replace the battery compartment cover.
4
170 UCONNECT 8.4/8.4 NAV
Uconnect Theater Home Screen And Controls
1 — Search Button (Media
Search)
2 — Power Button
3 — Settings Button
4 — Toggle Button List and Icon
View
5
1
6
7
8
9
— Source Card Page Indicator
or 2
— Wired Headphone Volume
— Climate Control Button
— Home Button
— Source Cards
You can choose sources such as HDMI, USB, Apps, or
Blu-ray. You may also view content of the opposite screen
in one step by choosing the “View Screen” source card.
NOTE:
• Source card order can be changed by pressing the
Settings button on the touchscreen and scrolling down
to ⬙Source Card Order⬙.
• Use the “View Screen” function to pull content from one
screen to the other. Doing this however will disable and
gray out certain player controls.
UCONNECT 8.4/8.4 NAV 171
General Settings
To change source card order, select “Source Card Reorder”,
then press and hold source card on the touchscreen, and
drag and drop in desired order.
You can also adjust the following below and more.
• Brightness
• Media port lighting on and off
• Clock on and off
NOTE: System information can also be displayed under
General Settings.
Remote Settings
Under this setting, you can access the following:
• Manage Remotes
• Remote sensitivity (This adjusts the speed and sensitivity of cursor on screen when using gesture pad)
Play A DVD/Blu-ray Or USB Media File From
Uconnect System
1. Insert a Blu-ray disc or DVD disc into the disc player
with the label facing up. Or insert a USB drive into rear
Video USB port.
NOTE: The DVD/Blu-ray Disc player and Video USB port
are both located under the radio controls in the instrument
panel.
2. Press the “Uconnect Theater” button on the radio touchscreen. Refer to “Accessing The System From The
Uconnect Radio” in this section for further information.
3. Select Disc or USB from the source controls on the
desired screen (1 or 2).
NOTE: To play a DVD/Blu-ray disc on both screens
simultaneously, select disc from both screen drop downs,
or choose disc source on one screen and push “View
Screen” button on the other.
4
172 UCONNECT 8.4/8.4 NAV
4. For DVD/Blu-ray disc – press Movie Snapshot on radio
touchscreen, then press “OK” on following screen. For
USB Media Files - Press Music, Movie, or Folders, then
select media title from list(s).
1 — Disc Player (Rear)
2 — Rear Video USB Port
UCONNECT 8.4/8.4 NAV 173
NOTE: Control functions apply to individual screen selected displayed on touchscreen.
1. Power
Press to turn “selected Screen” On/Off.
2. Mute
Blu-ray Controls – Disc Specific Functions
The four colored buttons (red, green, blue, yellow) are
designed for use with certain Blu-ray disc movie titles to
access particular features or software on the disc. See the
documentation provided with your Blu-ray disc movie to
see if these buttons can be used.
Mute rear headphones for selected source for the current
ignition cycle. Pressing mute again will unmute rear
headphones.
4
3. Lock
Press to enable/disable Remote Control functions and
Touchscreen Controls for the selected source.
4. View
Select this button to full screen video if vehicle is not
moving. Button is disabled when not viewing a video
source or when the vehicle is in motion.
To view a Blu-ray disc on the radio select the “View”
button while in the selected screen controls, then select the
Disc source from drop down menu.
NOTE: To view video content on the radio screen, bring the
vehicle to a stop.
1 — Red Button
2 — Green Button
3 — Blue Button
4 — Yellow Button
174 UCONNECT 8.4/8.4 NAV
Uconnect Theater Apps
Select the Apps source card to play pre-loaded games.
Pressing the “Help” button teaches users how to play each
game. Pick from games:
• Back Seat Bingo
• Checkers
• Hanging Fruit
• License Plate Game
• Math Flash Cards
• Solitaire
• Sudoku
UCONNECT 8.4/8.4 NAV 175
• Tic Tac Toe
NOTE: To exit a game, push “Exit Button” than “Back
Arrow,” or “Home Button” on the touchscreen.
NOTE: Route notifications will pop-up at the bottom of the
screen in the center.
Using The Rear Video USB Port
Are We There Yet? — Uconnect 8.4 NAV
4
When a navigation route has been set from the Uconnect
radio, the second row passengers can use “Are We There
Yet?” for an animated screen showing distance and time
remaining on navigation routes as well as the estimated
time of arrival with pop-up notifications. Notifications and
frequency can be set up for route information while in
other Uconnect Theater screens too.
Plug in a jump drive, iPhone, iPod or mass storage device
and play your favorite music or movies.
NOTE: To view USB media on the rear theater screens,
insert a USB jump drive into the port next to the DVD/
Blu-ray disc player. The USB jump drive port is located
under the radio controls in the instrument panel.
176 UCONNECT 8.4/8.4 NAV
Use the search feature to find your music faster.
Play Video Games
Connect the video game console to the HDMI 1 or 2 ports,
located behind the first row seat.
1 — AUX Jack (Headphone Output Only)
2 — HDMI Port
3 — USB Port (Charge Only)
Headphones Operation
The headphones receive two separate channels of audio
using an infrared transmitter from the video screens.
If no audio is heard after increasing the volume control,
verify that the screen is turned on, the channel is not muted
and that the headphone channel selector button is on the
desired channel. The channel selector button switches
UCONNECT 8.4/8.4 NAV 177
between the audio of screen 1 and screen 2. If audio is still
not heard, check that two new AAA type batteries are
installed in the headphones.
NOTE: Uconnect Theater must be turned on before sound
can be heard from the headphones. To conserve battery life,
the headphones will automatically turn off approximately
three minutes after the Uconnect Theater system is turned
off.
Changing The Audio Mode For Headphones
1. Ensure the remote control and the headphones are on
the same channel.
2. Push the Home button on the remote control.
1 — Power ON/OFF Button
2 — Volume Control Wheel
3 — Channel Selection Button
The headphone power indicator and controls are located
on the right ear cup.
3. When the Home menu appears on the touchscreen, use
the arrow buttons on the remote control to navigate to
the available modes and push the OK button to select
the new mode or use the Gesture Pad at the top of the
remote control.
4
178 UCONNECT 8.4/8.4 NAV
3. Install new batteries, making sure to orient them according to the polarity diagram shown inside the battery
compartment.
4. Replace the battery compartment cover.
Delphi Automotive Stereo Headphone Lifetime
Limited Warranty
Who Does This Warranty Cover? This warranty covers the
initial user or purchaser (⬙you⬙ or ⬙your⬙) of this particular
Delphi Automotive (⬙Delphi⬙) wireless headphone (⬙Product⬙). The warranty is not transferable.
Replacing The Headphone Batteries
Each set of headphones requires two AAA batteries for
operation.
NOTE: Perchlorate Material — special handling may apply. Visit dtsc.ca.gov/hazardouswaste/perchlorate
To replace the batteries:
1. Locate the battery compartment on the left ear cup of
the headphones, and then slide the battery cover downward.
2. Remove the old batteries and follow battery recycling
procedures for your area.
How Long Does the Coverage Last? This warranty lasts as
long as you own the Product.
What Does This Warranty Cover? Except as specified
below, this warranty covers any Product that in normal use
is defective in workmanship or materials.
What Does This Warranty Not Cover? This warranty does
not cover any damage or defect that results from misuse,
abuse or modification of the Product other than by Delphi
Automotive. Foam earpieces, which will wear over time
through normal use, are specifically not covered (replacement foam is available for a nominal charge). DELPHI
AUTOMOTIVE IS NOT LIABLE FOR ANY INJURIES OR
DAMAGES TO PERSONS OR PROPERTY RESULTING
UCONNECT 8.4/8.4 NAV 179
FROM THE USE OF, OR ANY FAILURE OR DEFECT IN,
THE PRODUCT, NOR IS DELPHI AUTOMOTIVE LIABLE
FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, PUNITIVE OR OTHER DAMAGES OF ANY KIND OR NATURE WHATSOEVER. Some states and jurisdictions may
not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not
apply to you. This warranty gives you specific legal rights.
You may also have other rights, which vary from jurisdiction to jurisdiction.
What Will Delphi Automotive Do? Delphi Automotive, at
its option, will repair or replace any defective Product.
Delphi Automotive reserves the right to replace any discontinued Product with a comparable model. THIS WARRANTY IS THE SOLE WARRANTY FOR THIS PRODUCT,
SETS FORTH YOUR EXCLUSIVE REMEDY REGARDING
DEFECTIVE PRODUCTS, AND IS IN LIEU OF ALL
OTHER WARRANTIES (EXPRESS OR IMPLIED), INCLUDING ANY WARRANTY FOR MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE.
If you have any questions or comments regarding your
Delphi Automotive wireless headphones, please phone:
1-888-293-3332
You may register your Delphi Automotive wireless headphones by phone at:
1-888-293-3332
Disc Menu
When listening to a CD Audio or CD Data disc, pushing
the remote control’s arrow buttons will navigate the cursor
on the rear touchscreen in the desired direction, on whichever touchscreen is selected. The UP, DOWN, LEFT, and
RIGHT arrow buttons, and the OK and MENU buttons on
the remote, along with the corresponding buttons overlaid
on the radio touchscreen, can be used to navigate the disc
menu when it appears. This can be used to select specific
chapters in a movie, navigate special features, or to play
the movie from the menu.
NOTE: Inserting a disc into the player will “auto play” the
disc if already in the ⬙Disc⬙ source menu on the rear
screens.
Display Settings
When watching a video source, pushing “Settings”
icon
on the touchscreen activates the Settings menu. These
settings control the appearance of the video on the
4
180 UCONNECT 8.4/8.4 NAV
screen. The factory default settings are already set for
optimum viewing, so there is no need to change these
settings under normal circumstances.
To change the settings, use one of the touchscreens. To reset
all values back to the original settings, select the “Reset to
Defaults” then select “YES.”
Rear Climate Controls
The rear climate controls can also be controlled using the
Uconnect Theater system. Refer to “Climate Controls” in
“Getting To Know Your Vehicle” in your Owner’s Manual
on the DVD for further information.
Listening To Audio With The Screen Closed
To listen to only audio portion of the channel with the
screen closed:
• Set the audio to the desired source and channel.
• Close the video screen.
• When the screen is reopened, the video screen will
automatically turn back on and show the appropriate
display menu or media.
If the screen is closed and there is no audio heard, verify
that the headphones are turned on (the ON indicator is
illuminated) and the headphone selector switch is on the
desired channel. If the headphones are turned on, push the
remote control’s power button to turn audio on. If audio is
still not heard, check that fully charged batteries are
installed in the headphones.
BD And DVD Region Codes
Many BD and DVD discs are coded by geographic region.
These region codes must match in order for the disc to play.
If the region code for the BD or DVD disc does not match the
region code for the Blu-ray Disc player, the disc will not play.
USA and Canada are set for BD : code A / DVD : code 1.
UCONNECT 8.4/8.4 NAV 181
Recorded Discs
The Blu-ray Disc player will play CD-R and CD-RW discs
recorded in CD-Audio or Video-CD format, or as a CDROM containing MP3, AAC or WMA files. The player will
also play DVD-Video content recorded to a DVD-R or
DVD-RW disc. DVD-ROM discs (either pressed or recorded) are not supported. Compressed audio and DivX
recorded on DVD is playable.
If you record a disc using a personal computer, there may
be cases where the Blu-ray Disc player may not be able to
play some or the entire disc, even if it is recorded in a
compatible format and is playable on other players. To help
avoid playback problems, use the following guidelines
when recording discs.
• Open sessions are ignored. Only sessions that are closed
are playable.
• For multi-session CDs that contain only multiple CDAudio sessions, the player will renumber the tracks so
each track number is unique.
• For CD Data (or CD-ROM) discs, always use the ISO9660 (Level 1 or Level 2), Joliet, or Romeo format. Other
formats (such as HFS, or others) are not supported.
• The player recognizes a maximum of 2000 files and
255 folders (includes the ROOT folder) per CD-R and
CD-RW disc.
• Mixed media recordable DVD formats will only play the
Video_TS portion of the disc.
If you are still having trouble writing a disc that is playable
in the Blu-ray Disc player, check with the disc recording
software publisher for more information about burning
playable discs.
The recommended method for labeling recordable discs
(CD-R, CD-RW, and DVD-R) is with a permanent marker.
Do not use adhesive labels as they may separate from the
disc, become stuck, and cause permanent damage to the
DVD player.
Compressed Audio Files (MP3, WMA and AAC)
The Blu-ray Disc player is capable of playing MP3 (MPEG1 Audio Layer 3), WMA (Windows Media Audio) files and
AAC (Advanced Audio Coding) from a CD Data disc
(usually a CD-R or CD-RW) or DVD Data disc (usually a
DVD-R or DVD-RW).
• The Blu-ray Disc player always uses the file extension to
determine the audio format, so MP3 files must always
end with the extension “.mp3” or “.MP3” and WMA
4
182 UCONNECT 8.4/8.4 NAV
files must always end with the extension “.wma” or
“.WMA” and AAC files must always end with the
extension and “.aac” or “.AAC” or “m4a”. To prevent
incorrect playback, do not use these extensions for any
other types of files.
• For MP3 files, ID3v1, ID3v2 tag data (such as artist
name, track title, album, etc.) are supported.
• Any file that is copy protected (such as those downloaded from many online music stores) will not play. The
Blu-ray player will automatically skip the file and begin
playing the next available file.
• Other compression formats such as MP3 Pro, Ogg
Vorbis, and ATRAC3 will not play. The Blu-ray player
will automatically skip the file and begin playing the
next available file.
• If you are creating your own files, the recommended
fixed bit rate for MP3 files is between 32 and 320Kbps
and the recommended fixed bit rate for WMA files is
between 16 and 192Kbps. Variable bit rates are also
supported. For both formats, the recommended sample
rate is either 44.1kHz or 48kHz.
• To change the current file, use the remote control “Seek
Forward” or “Seek Back” buttons to return to the start of
the current or previous file.
• AAC (MPEG-4 AAC, Low Complexity Profile) support.
• AAC HE v1 (AAC High Efficiency v1 aka. AAC/
MPEG4v2 AAC+) support.
• HE-AAC v1, v2 support.
Disc Errors
If the Blu-ray Disc player is unable to read the disc, a ⬙Disc
Error⬙ message is displayed on the rear screen and Radio
displays. A dirty, damaged, or incompatible disc format are
all potential causes for a ⬙Disc Error⬙ message.
If a disc has a damaged track which results in audible or
visible errors that persists for two seconds, the Blu-ray Disc
player will attempt to continue playing the disc by skipping forward one to three seconds at a time. If the end of
the disc is reached, the Blu-ray Disc player will return to
the beginning of the disc and attempt to play the start of
the first track.
The Blu-ray Disc player may shut down during extremely
hot conditions, such as when the vehicle’s interior temperature is above 140° F (60.0° C). When this occurs, the
UCONNECT 8.4/8.4 NAV 183
player will display ⬙High Temp⬙ and will shut off the Rear
Seat displays until a safe temperature is reached. This
shutdown is necessary to protect the optics of the Blu-ray
Disc player.
Product Agreement
Open Source Software
The software built into this product, are composed of
multiple software components, and there are the copyrights of our company or third parties in each software
component. Also, in this product, the following open
source software has been installed.
• The licensed software for our company is based on GNU
GENERAL PUBLIC LICENSE V2.0 (⬙GPL⬙).
• The licensed software for our company is based on GNU
LESSER GENERAL PUBLIC LICENSE V2.1 (⬙LGPL⬙).
• The software which has the copyrights of a third party
and is distributed as free software.
Please refer the contract details which are disclosed in
following website, for example, concerning these above
software.
http://www.gnu.org/licenses/old-licenses/
gpl-2.0-standalone.html, http://www.gnu.org/licenses/
lgpl-2.1-standalone.html,
http://www.freetype.org/
FTL.TXT.
You have the right of acquisition, modification, and distribution of the source code of the GPL/LGPL software.
These are distributed in the hope that it will be useful by
itself. However, including the absence of an implied warranty on the ⬙suitability for a particular purpose⬙ or ⬙merchantability⬙, the warranty of any kind will not be made.
You may download Source Code from the indicating URL
by the pressed button of “Open Source Software” on the
Setup Menu. Also, please refrain from contact about the
contents of the source code of open source. The source code
of the software in which there are the copyrights of our
company or third parties, is not subject to distribution.
4
184 UCONNECT 8.4/8.4 NAV
kernel 2.6.16.29
FreeType 2 2.2.1
gcc sh4eb 3.4.5
glibc 2.3.5
libgcc_s-3.4.5
libtermcap 2.0.8
bash-3.0-31
mtd-utils 20050619
busybox 1.00
initscripts 8.11.1-1
MAKE DEV 1.1.0
libstdc+ +3.4.5-10
coreutils 6.9
dosfstools 2.10-3
directfb 1.0.0-rc1
kxml 1.21
v2lin 0.1
-
-
-
boot_loader sh-ipl +g
1.00
module-init-tools 3.1.0
libiconv 1.11
binutils-sh4eb
2.16.91.0.2
-
Dolby
BDA
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
“Blu-ray Disc, Blu-ray, BD-Live, BONUSVIEW, AVCREC
and the logos are trademarks of the Blu-ray Disc Association.”
DTS
AVCHD
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered
trademarks, and DTS 2.0 Channel is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.
⬙AVCHD⬙ and the ⬙AVCHD⬙ logo are trademarks of Panasonic Corporation and Sony Corporation.
DVD
⬙The DVD logo” is a trademark of DVD Format/Logo
Licensing Corporation.⬙ or ⬙ DVD logo is a trademark of
DVD Format/Logo Licensing Corporation registered in the
U.S., Japan and other countries.⬙
BD-J
Java is a registered trademark of Oracle and/or its affiliates.
MPEG
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND
UCONNECT 8.4/8.4 NAV 185
NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (⬙AVC VIDEO⬙) AND/OR (ii) DECODE AVC
VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL
ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO
PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR
ANY OTHER USE. ADDITIONAL INFORMATION MAY
BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://
WWW.MPEGLA.
DivX
This DivX Certified device has passed rigorous testing to
ensure it plays DivX video. To play purchased DivX
movies, first register your device at vod.divx.com. Find
your registration code in the DivX VOD section of your
device setup menu. DivX, DivX Certified and associated
logos are trademarks of DivX, LLC and are used under
license.
Cinavia
⬙Cinavia Notice This product uses Cinavia technology to
limit the use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks. When a
prohibited use of an unauthorized copy is detected, a
message will be displayed and playback or copying will be
interrupted. More information about Cinavia technology is
provided at the Cinavia Online Consumer Information
Center at http://www.cinavia.com. To request additional
information about Cinavia by mail, send a postcard with
your mailing address to: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA, 92138, USA.” “This
product incorporates proprietary technology under license
from Verance Corporation and is protected by U.S. Patent
7,369,677 and other U.S. and worldwide patents issued and
pending as well as copyright and trade secret protection for
certain aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2012 Verance
Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.
CAUTION!
Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous radiation exposure.
4
186 UCONNECT 8.4/8.4 NAV
General Information
The operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference that may be
received including interference that may cause undesired operation.
FCC/IC Regulatory Notices
Modification Statement
Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate this equipment.
Interference statement
This device complies with Part 15 of the FCC Rules and
Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may
cause undesired operation of the device.
Wireless notice
This device complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines and
RSS-102 of the IC radio frequency (RF) Exposure rules. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Class B digital device notice
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
UCONNECT 8.4/8.4 NAV 187
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian
ICES-003.
SiriusXM TRAFFIC — U.S. MARKET 8.4 NAV ONLY
Don’t drive through traffic. Drive around it.
Avoid congestion before you reach it. By enhancing your
vehicle’s navigation system with the ability to see detailed
traffic information, you can pinpoint traffic incidents, determine average traffic speed and estimate travel time
along your route. Since the service is integrated with a
vehicle’s navigation system, SiriusXM Traffic can help
drivers pick the fastest route based on traffic conditions.
1. Detailed information on traffic speed, accidents, construction, and road closings.
2. Traffic information from multiple sources, including
police and emergency services, cameras and road sensors.
3. Coast-to-coast delivery of traffic information.
4. View conditions for points along your route and beyond.
SiriusXM TRAVEL LINK — U.S. MARKET ONLY
(8.4 NAV ONLY)
In addition to delivering over 160 channels of the best
sports, entertainment, talk, and commercial-free music,
SiriusXM offers premium data services that work in conjunction with compatible navigation systems. SiriusXM
Travel Link brings a wealth of useful information into your
vehicle and right to your fingertips.
• Weather — Check variety of local and national weather
information from radar maps to current and five day
forecast.
• Fuel Prices — Check local gas and diesel prices in your
area and route to the station of your choice.
• Sports Scores — In-game and final scores as well as
weekly schedules.
• Movie Listings — Check local movie theatres and listings in your area and route to the theater of your choice.
4
188 UCONNECT 8.4/8.4 NAV
SiriusXM Travel Link feature is completely integrated into
your vehicle. A few minutes after you start your vehicle,
Travel Link information arrives and updates in the background. You can access the information whenever you like,
with no waiting.
”
• To access SiriusXM Travel Link, press the “Apps
button on the touchscreen, then the SiriusXM Travel
Link button on the touchscreen.
NOTE:
• SiriusXM Travel Link requires a subscription, sold separately after the five year trial subscription included with
your vehicle purchase.
• SiriusXM Travel Link is only available in the continental
United States.
SECURITY FEATURES
Roadside Assistance Call — If Equipped
If your vehicle is equipped with this feature and within
cellular range, you may be able to connect to Roadside
Assistance Call, Uconnect Care and Vehicle Care by pressing the “Assist” button on the Rearview Mirror of your
vehicle. To the extent any such calls incur additional costs,
you are responsible for them. If Roadside Assistance Call is
provided to your vehicle, you agree to be responsible for
any additional roadside assistance service costs that you
may incur.
To provide Uconnect Services to you, we may record and
monitor your conversations with Roadside Assistance Call,
Uconnect Care or Vehicle Care, whether such conversations
are initiated through the Uconnect Services in your vehicle,
or via a landline or mobile telephone, and may share
information obtained through such recording and monitoring in accordance with regulatory requirements. You acknowledge, agree and consent to any recording, monitoring or sharing of information obtained through any such
call recordings.
9-1-1 Call — If Equipped
The 9-1-1 Call system is an embedded phone system that
allows you to connect to a 9-1-1 operator in an emergency.
You can choose to press the “9-1-1 Call” button on the
Rearview Mirror to contact a 9-1-1 operator.
UCONNECT 8.4/8.4 NAV 189
9-1-1 Call Operating Instructions
1. Push the “9-1-1 Call” button on the Rearview Mirror;
NOTE: In case the 9-1-1 Call button is pushed in error,
there will be a 10 second delay before the 9-1-1 Call system
initiates a call to a 9-1-1 operator. To cancel the 9-1-1 Call
connection, push the “9-1-1 Call” button on the Rearview
Mirror or press the “cancellation” button on the Phone
Screen. Termination of the 9-1-1 Call will turn the green
LED light on the Rearview Mirror off.
2. The LED light on the Rearview Mirror will turn green
once a connection to a 9-1-1 operator has been made.
3. Once a connection between the vehicle and a 9-1-1
operator is made, the 9-1-1 Call system may transmit the
following important vehicle information to a 9-1-1 operator:
• Indication that the occupant placed a 9-1-1 Call.
• The vehicle brand.
• The last known GPS coordinates of the vehicle – if
equipped.
4. You should be able to speak with the 9-1-1 operator
through the vehicle audio system to determine if additional help is needed.
WARNING!
ALWAYS obey traffic laws and pay attention to the
road. Some Uconnect Access services, including 9-1-1
and Assist, will NOT work without an operable
1X(voice/data) or 3G(data) network connection.
NOTE:
• Your vehicle may be transmitting data as authorized
by the subscriber.
• Once a connection is made between the vehicle’s 9-1-1
Call system and the 9-1-1 operator, the 9-1-1 operator
may be able to open a voice connection with the
vehicle to determine if additional help is needed. Once
the 9-1-1 operator opens a voice connection with the
vehicle’s 9-1-1 Call system, the operator should be able
to speak with you or other vehicle occupants and hear
sounds occurring in the vehicle. The vehicle’s 9-1-1
Call system will attempt to remain connected with the
9-1-1 operator until the 9-1-1 operator terminates the
connection.
4
190 UCONNECT 8.4/8.4 NAV
5. The 9-1-1 operator may attempt to contact appropriate
emergency responders and provide them with important vehicle information and GPS coordinates.
WARNING!
• If anyone in the vehicle could be in danger (e.g., fire
or smoke is visible, dangerous road conditions or
location), do not wait for voice contact from a 9-1-1
operator. All occupants should exit the vehicle immediately and move to a safe location.
• Never place anything on or near the vehicle’s operable 1X(voice/data) or 3G(data) network and GPS
antennas. You could prevent operable 1X(voice/data)
or 3G(data) network and GPS signal reception,
which can prevent your vehicle from placing an
emergency call. An operable 1X(voice/data) or
3G(data) network and GPS signal reception is required for the 9-1-1 Call system to function properly.
(Continued)
WARNING! (Continued)
• The 9-1-1 Call system is embedded into the vehicle’s
electrical system. Do not add aftermarket electrical
equipment to the vehicle’s electrical system. This
may prevent your vehicle from sending a signal to
initiate an emergency call. To avoid interference that
can cause the 9-1-1 Call system to fail, never add
aftermarket equipment (e.g., two-way mobile radio,
CB radio, data recorder, etc.) to your vehicle’s electrical system or modify the antennas on your vehicle. IF
YOUR VEHICLE LOSES BATTERY POWER FOR
ANY REASON (INCLUDING DURING OR AFTER
AN ACCIDENT), THE UCONNECT FEATURES,
APPS AND SERVICES, AMONG OTHERS, WILL
NOT OPERATE.
• Modifications to any part of the 9-1-1 Call system
could cause the air bag system to fail when you need
it. You could be injured if the air bag system is not
there to help protect you.
9-1-1 Call System Limitations
Vehicles sold in Canada and Mexico DO NOT have 9-1-1
Call system capabilities.
UCONNECT 8.4/8.4 NAV 191
9-1-1 or other emergency line operators in Canada and
Mexico may not answer or respond to 9-1-1 system calls.
If the 9-1-1 Call system detects a malfunction, any of the
following may occur at the time the malfunction is detected, and at the beginning of each ignition cycle:
• The Rearview Mirror light will continuously be illuminated red.
• The Phone Screen will display the following message
“Vehicle phone requires service. Please contact your
dealer.”
• An In-Vehicle Audio message will state “Vehicle phone
requires service. Please contact your dealer.”
WARNING! (Continued)
• The Occupant Restraint Control module turns on the
Air Bag Warning Light on the instrument panel if a
malfunction in any part of the system is detected. If
the Air Bag Warning Light is illuminated, have an
authorized dealer service the Occupant Restraint
Control system immediately.
Even if the 9-1-1 Call system is fully functional, factors
beyond FCA US LLC’s control may prevent or stop 9-1-1
Call system operation. These include, but are not limited
to, the following factors:
• Delayed accessories mode is active.
• The ignition key is in OFF position.
WARNING!
• Ignoring the rearview mirror light could mean you
will not have 9-1-1 Call services. If the rearview
mirror light is illuminated, have an authorized dealer
service the 9-1-1 Call system immediately.
(Continued)
• The vehicle’s electrical systems are not intact.
• The 9-1-1 Call system software and/or hardware are
damaged during a crash.
• The vehicle battery loses power or becomes disconnected during a vehicle crash.
• 1X (voice/data) or 3G (data) network and/or Global
Positioning Satellite signals are unavailable or
obstructed.
4
192 UCONNECT 8.4/8.4 NAV
• Equipment malfunction at the 9-1-1 operator facility.
General Information
• Operator error by the 9-1-1 operator.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
• 1X (voice/data) or 3G (data) network congestion.
• Weather.
• Buildings, structures, geographic terrain, or tunnels.
WARNING!
ALWAYS obey traffic laws and pay attention to the
road. Some Uconnect Access services, including 9-1-1
and Assist, will NOT work without an operable
1X(voice/data) or 3G(data) network connection.
NOTE:
• Your vehicle may be transmitting data as authorized by
the subscriber.
• Never place anything on or near the vehicle’s 1X (voice/
data) or 3G (data) and GPS antennas. You could prevent
1X (voice/data) or 3G (data) and GPS signal reception,
which can prevent your vehicle from placing an emergency call. An operable 1X (voice/data) or 3G (data)
network connection and a GPS signal is required for the
9-1-1 Call system to function properly.
NOTE: Changes or modifications not expressly approved
by the party responsible for compliance could void the
user’s authority to operate the equipment.
REMOTE SERVICE FEATURES
For further information regarding Remote Service Features, refer to ”Using Uconnect Access” in the All About
Uconnect
Access”
Chapter
or
go
to
moparownerconnect.com . U.S. residents can also call:
1-855-792-4241
or Canadian residents call:
1-855-209-8317
UCONNECT SETTINGS
CONTENTS
䡵 UCONNECT 8.4 SETTINGS . . . . . . . . . . . . . . . .194
5
194 UCONNECT SETTINGS
UCONNECT 8.4 SETTINGS
NOTE:
• Only one touchscreen area may be selected at a time.
• Depending on the vehicles options, available feature
settings may vary.
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
Press the “Apps
” button on the touchscreen, then
press the “Settings
” button on the touchscreen to
display the menu setting screen. In this mode, the
Uconnect system allows you to access all of your
programmable features.
When making a selection, press the button on the touchscreen to enter the desired mode. Once in the desired
mode, press and release the preferred setting until a
check-mark appears next to the setting, showing that
setting has been selected. Once the setting is complete,
either press the Back Arrow button on the touchscreen to
return to the previous menu, or press the “X” button on the
touchscreen to close out of the settings screen. Pressing the
Up or Down Arrow button on the right side of the screen
will allow you to toggle up or down through the available
settings.
Refer to “Uconnect Settings” in the Owner’s Manual on the
DVD for further information.
VOICE RECOGNITION QUICK TIPS
CONTENTS
䡵 UCONNECT 8.4/8.4 NAV VOICE
RECOGNITION QUICK TIPS . . . . . . . . . . . . . . .196
▫ Introducing Uconnect . . . . . . . . . . . . . . . . . . .196
▫ Get Started . . . . . . . . . . . . . . . . . . . . . . . . . . .196
▫ Basic Voice Commands . . . . . . . . . . . . . . . . . .197
▫ Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198
▫ Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198
▫ Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199
▫ Voice Text Reply . . . . . . . . . . . . . . . . . . . . . . .200
▫ Climate . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
▫ Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . .202
▫ Uconnect Access . . . . . . . . . . . . . . . . . . . . . . .203
▫ Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . .204
▫ Vehicle Health Report/Alert . . . . . . . . . . . . . . .204
▫ Mobile App . . . . . . . . . . . . . . . . . . . . . . . . . .204
▫ Voice Texting . . . . . . . . . . . . . . . . . . . . . . . . .205
▫ Yelp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207
▫ SiriusXM Travel Link . . . . . . . . . . . . . . . . . . . .207
▫ Siri Eyes Free — If Equipped . . . . . . . . . . . . . .208
▫ General Information . . . . . . . . . . . . . . . . . . . . .210
▫ Additional Information . . . . . . . . . . . . . . . . . . .210
6
196 VOICE RECOGNITION QUICK TIPS
UCONNECT 8.4/8.4 NAV VOICE RECOGNITION
QUICK TIPS
Introducing Uconnect
Start using Uconnect Voice Recognition with these helpful
quick tips. It provides the key Voice Commands and tips
you need to know to control your Uconnect 8.4 or 8.4 NAV
systems.
Get Started
All you need to control your Uconnect system with your
voice are the buttons on your steering wheel.
1. Visit UconnectPhone.com to check mobile device and
feature compatibility and to find phone pairing instructions.
2. Reduce background noise. Wind and passenger conversations are examples of noise that may impact recognition.
3. Speak clearly at a normal pace and volume while facing
straight ahead. The microphone is positioned on the
rearview mirror and aimed at the driver.
4. Each time you give a Voice Command, you must first
push either the VR or Phone button, wait until after the
beep, then say your Voice Command.
icon on your touchscreen, you have the
If you see the
Uconnect 8.4 NAV system. If not, you have a Uconnect
8.4 system.
VOICE RECOGNITION QUICK TIPS
5. You can interrupt the help message or system prompts
by pushing the VR or Phone button and saying a Voice
Command from current category.
197
Basic Voice Commands
The basic Voice Commands below can be given at any
point while using your Uconnect system.
Push the VR button
. After the beep, sayѧ
• Cancel to stop a current voice session
• Help to hear a list of suggested Voice Commands
• Repeat to listen to the system prompts again
Notice the visual cues that inform you of your voice
recognition system’s status. Cues appear above the radio
icon on the touchscreen.
Push To Initiate Or To Answer A
1 — Phone Pick up Button
Phone Call, Send Or Receive A Text
Push To Begin Radio, Media,
2 — Voice Recognition Button
Navigation, Apps And Climate Functions
Push To End Call
3 — Phone Hang Up Button
6
198 VOICE RECOGNITION QUICK TIPS
Radio
Use your voice to quickly get to the AM, FM or SiriusXM
Satellite Radio stations you would like to hear. (Subscription or included SiriusXM Satellite Radio trial required.)
Push the VR button
. After the beep, sayѧ
• Tune to ninety-five-point-five FM
• Tune to Satellite Channel Hits 1
TIP: At any time, if you are not sure of what to say or want
to learn a Voice Command, push the VR button and say
“Help.” The system will provide you with a list of commands.
Media
Uconnect offers connections via USB, SD, Bluetooth and
auxiliary ports. Voice operation is only available for connected USB and iPod devices. (Remote CD player optional
and not available on all vehicles.)
. After the beep, say one of the
Push the VR button
following commands and follow the prompts to switch
your media source or choose an artist.
• Change source to Bluetooth
• Change source to iPod
• Change source to USB
VOICE RECOGNITION QUICK TIPS
• Play artist Beethoven; Play album Greatest Hits; Play
song Moonlight Sonata; Play genre Classical
TIP: Press the Browse button on the touchscreen to see all
of the music on your iPod or USB device. Your Voice
Command must match exactly how the artist, album, song
and genre information is displayed.
199
Phone
Making and answering hands-free phone calls is easy with
Uconnect. When the “phonebook” button is illuminated on
your touchscreen, your system is ready. Check
UconnectPhone.com for mobile phone compatibility and
pairing instructions.
Push the Phone button
following commandsѧ
. After the beep, say one of the
• Call John Smith
• Dial 123-456-7890 and follow the system prompts
• Redial (call previous outgoing phone number)
• Call back (call previous incoming phone number)
You can send ”tones” to remove the need of typing into the
keypad when joining a conference call which requires a
, after the beep, say
code. Push the Phone button
“Send” followed by the desired tones; e.g. 49275#.
6
200 VOICE RECOGNITION QUICK TIPS
TIP: When providing a Voice Command, push the Phone
and say “Call,” then pronounce the name
button
exactly as it appears in your phone book. When a
contact has multiple phone numbers, you can say “Call
John Smith work.”
Voice Text Reply
Uconnect will announce incoming text messages. Push the
and say Listen. (Must have compatible
Phone button
mobile phone paired to Uconnect system.)
1. Once an incoming text message is read to you, push the
. After the beep, say: “Reply.”
Phone button
2. Listen to the Uconnect prompts. After the beep, repeat
one of the pre-defined messages and follow the system
prompts.
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Yes.
Stuck in traffic.
See you later.
Start without
No.
I’ll be late.
me.
Okay.
Where are you?
I will be <number> minutes
Are you there
Call me.
late.
yet?
I need
See you in
I’ll call you later.
directions.
<number> minutes.
I’m on my way.
Can’t talk right
now.
I’m lost.
Thanks.
TIP: Your mobile phone must have the full implementation
of the Message Access Profile (MAP) to take advantage of
this
feature.
For
details
about
MAP,
visit
UconnectPhone.com.
VOICE RECOGNITION QUICK TIPS
Apple iPhone iOS 6 or later supports reading incoming
text messages only. To enable this feature on your Apple
iPhone, follow these 4 simple steps:
201
TIP: Voice Text Reply is not compatible with iPhone, but if
your vehicle is equipped with Siri Eyes Free, you can use
your voice to send a text message.
Climate
Too hot? Too cold? Adjust vehicle temperatures hands-free
and keep everyone comfortable while you keep moving
ahead. (If vehicle is equipped with climate control.)
. After the beep, say one of the
Push the VR button
following commandsѧ
• Set driver temperature to 70 degrees
• Set passenger temperature to 70 degrees
iPhone Notification Setting
1
2
3
4
—
—
—
—
Select “Settings”
Select “Bluetooth”
Select the (i) for the paired vehicle
Turn on “Show Notifications”
6
202 VOICE RECOGNITION QUICK TIPS
TIP: Voice Command for Climate may only be used to
adjust the interior temperature of your vehicle. Voice
Command will not work to adjust the heated seats or
steering wheel. (If equipped.)
1. To enter a destination, push the VR button
. After the
beep, sayѧ
• For the 8.4 Uconnect System, say... “Enter state”
• For the 8.4 NAV Uconnect System, say... “Navigate to
800 Chrysler Drive Auburn Hills, Michigan”
2. Then follow the system prompts.
TIP: To start a POI search, push the VR button
the beep, say “ Find nearest coffee shop.”
Navigation
The Uconnect navigation feature helps you save time and
become more productive when you know exactly how to
get to where you want to go. (Navigation is optional on the
Uconnect 8.4 system. See your dealer to activate navigation
at any time.)
. After
VOICE RECOGNITION QUICK TIPS
203
Vehicle Finder
Uconnect Access
Send ‘N Go
WARNING!
ALWAYS obey traffic laws and pay attention to the
road. Some Uconnect Access services, including 9-1-1
and Assist, will NOT work without an operable
1X(voice/data) or 3G(data) network connection.
Stolen Vehicle Assistance
Remote Vehicle Start**
Remote Horn and Lights
Yelp Search
NOTE: Your vehicle may be transmitting data as authorized by the subscriber.
Voice Texting
An included trial and/or subscription is required to take
advantage of the Uconnect Access services in the next
section of this guide. To register with Uconnect Access,
press the Apps button on the 8.4-inch touchscreen to get
started.
3G Wi-Fi Hotspot***
NOTE: Uconnect Access is available only on equipped
vehicles purchased within the continental United States,
Alaska and Hawaii. Services can only be used where
coverage is available; see coverage map for details.
9-1-1 Call
Security Alarm Notification
Remote Door Lock/Unlock
Roadside Assistance Call
Vehicle Health Reports**
Vehicle Health Alert**
**If vehicle is equipped.
***Extra charges apply.
6
204 VOICE RECOGNITION QUICK TIPS
Register
To unlock the full potential of Uconnect Access in your
vehicle, you first need to register with Uconnect Access.
1. Push the ASSIST button on your rearview mirror.
Signing up is easy! Simply follow the steps above. Or,
press the “Apps
” button on the touchscreen to
“Register By Web” to complete the process using your
smartphone or computer.
For
further
information
www.driveuconnect.com
please
visit
Vehicle Health Report/Alert
Your vehicle will send you a monthly email report, which
summarizes the performance of your vehicle’s key systems
so you can stay on top of your vehicle’s maintenance
needs. Your vehicle will also send you Vehicle Health
Alerts when it detects issues with its key systems that need
your attention. For further information go to the Mopar
Owner Connect website moparownerconnect.com.
Mobile App
2. Press the “Uconnect Care” button on the touchscreen.
3. A helpful Uconnect Care Agent will register your vehicle and handle all of the details.
You’re only a few steps away from using remote commands and playing your favorite music in your car.
VOICE RECOGNITION QUICK TIPS
205
5. Next time you’re in your vehicle, enable Bluetooth, pair
your phone and select the Via Mobile app you want to
play from the Uconnect touchscreen to stream your
personalized music.
NOTE:
• You can also complete this process on the web. Simply
visit moparownerconnect.com log in and click Set Up
Via Mobile Profile (under Quick Links).
Mobile App
• Once you download the app to your compatible mobile
device, you will also be able to start your vehicle and
lock/unlock its doors from virtually anywhere.
To link your internet radio accounts:
Voice Texting
1. Download the Uconnect Access App to your mobile
device.
1. To send a message, push the Phone button
. After the
beep, say the following command: “Send message to
John Smith.”
2. Press the Via Mobile icon on the navigation bar at the
bottom of the app.
3. Press the app you’d like to connect to your vehicle.
4. Enter your login information for the selected app and
press Link.
2. Listen to the prompt. After the beep, dictate the message
you would like to send. Wait for Uconnect to process
your message.
6
206 VOICE RECOGNITION QUICK TIPS
3. The Uconnect system will repeat your message and
provide a variety of options to add to, delete, send or
hear the message again. After the beep, tell Uconnect
what you’d like to do. For instance, if you’re happy with
your message, after the beep, say: “Send.”
You must be registered with Uconnect Access and have a
compatible MAP – enabled smartphone to use your voice
to send a personalized text message. For details about
MAP, visit UconnectPhone.com.
Apple iPhone iOS6 or later supports reading incoming text
messages only, but if your vehicle is equipped with Siri
Eyes Free, you can use your voice to send a text message.
To enable this feature on your Apple iPhone, follow these
4 simple steps:
iPhone Notification Setting
1
2
3
4
—
—
—
—
Select “Settings”
Select “Bluetooth”
Select the (i) for the paired vehicle
Turn on “Show Notifications”
TIP:
• Voice Texting is not compatible with iPhone, but if your
vehicle is equipped with Siri Eyes Free, you can use your
voice to send a text message.
• Messages are limited to 140 characters.
VOICE RECOGNITION QUICK TIPS
207
• The Messaging button on the touchscreen must be
illuminated to use the feature.
Yelp
Once registered with Uconnect Access, you can use your
voice to search for the most popular places or things
around you.
1. Press the “Apps
” button on the touchscreen.
2. Press the “Yelp” button on the touchscreen.
3. Once the YELP home screen appears on the touchscreen,
, then say: “YELP search.”
push the VR button
4. Listen to the system prompts and after the beep, tell
Uconnect the place or business that you’d like Uconnect
to find.
TIP: Once you perform a search, you can reorganize the
results by selecting either the Best Match, Rating or Distance tab on the top of the touchscreen display.
6
SiriusXM Travel Link
Need to find a gas station, view local movie listings, check
a sports score or the 5 - day weather forecast? SiriusXM
Travel Link is a suite of services that brings a wealth of
information right to your Uconnect 8.4 NAV system. (Not
available for 8.4 system.)
. After the beep, say one of the
Push the VR button
following commandsѧ
• Show fuel prices
• Show 5 - day weather forecast
• Show extended weather
208 VOICE RECOGNITION QUICK TIPS
TIP: Traffic alerts are not accessible with Voice Command.
Siri Eyes Free — If Equipped
Siri lets you use your voice to send text messages, select
media, place phone calls and much more. Siri uses your
natural language to understand what you mean and will
respond back to confirm your requests. The system is
designed to keep your eyes on the road and your hands on
the wheel by letting Siri help you perform useful tasks.
To enable Siri push and hold, then release the Uconnect
Voice Recognition (VR) button on the steering wheel. After
you hear a double beep, you can ask Siri to play podcasts
and music, get directions, read text messages, and many
other useful requests.
VOICE RECOGNITION QUICK TIPS
209
Getting Started
Ensure Siri is enabled on your iPhone.
6
Voice Recognition/Siri Buttons
1 — Phone Pick up Button
2 — Voice Recognition/Siri Eyes Free Button
3 — Phone Hang Up Button
1 — Select Settings on your
iPhone
2 — Select General
3 — Select Siri
4 — Enable Siri
1. Pair your Siri enabled device to the vehicles sound
system. Refer to “Uconnect Phone” in “Uconnect 8.4/
8.4 NAV” for a detailed pairing procedure.
NOTE: A push and release of the
button will start
normal embedded VR functions. The push and hold,
button will start Siri functions.
then release of the
2. After the double beep, begin speaking to Siri.
Examples of Siri commands and questions:
• ⬙Play Rolling Stones⬙
• ⬙Send text message to John⬙
210 VOICE RECOGNITION QUICK TIPS
• ⬙Read text message from Sarah⬙
• ⬙Take me to the nearest coffee shop⬙
NOTE:
• Speak clearly at a normal pace and volume while
facing straight ahead to ensure your command is
understood.
• Siri is available on iPhone 4S and later.
General Information
This device complies with FCC rules Part 15 and Industry
Canada RSS-210. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference that may be
received including interference that may cause undesired operation.
NOTE:
• The transmitter has been tested and it complies with
FCC and IC rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
device.
• The term IC before the certification/registration number
only signifies that Industry Canada technical specifications were met.
Additional Information
© 2016 FCA US LLC. All rights reserved. Mopar and
Uconnect are registered trademarks and Mopar Owner
Connect is a trademark of FCA US LLC. Android is a
trademark of Google Inc. SiriusXM and all related marks
VOICE RECOGNITION QUICK TIPS
211
and logos are trademarks of SiriusXM Radio Inc. Yelp, Yelp
logo, Yelp burst and related marks are registered trademarks of Yelp.
Uconnect System Support:
• U.S. residents visit DriveUconnect.com or
1-877-855-8400 (24 hours a day 7 days a week)
call:
• Canadian residents visit DriveUconnect.ca or call:
1-800-465-2001 (English) or 1-800-387-9983 (French)
Mon. – Fri., 8:00 am – 8:00 pm, ET
Sat., 9:00 am – 5:00 pm, ET
Sun., Closed
Uconnect Access services support, call: 1-855-792-4241
Please have your Uconnect Security PIN ready when you
call.
6
UCONNECT 8.4/8.4 NAV
OWNER’S MANUAL
SUPPLEMENT
17UC84A-526-AC
Third Edition
Uconnect 8.4/8.4 NAV
Printed in the USA
©2016 FCA US LLC. All Rights Reserved.
Chrysler, Dodge, Jeep, Ram, Mopar and Uconnect are trademarks of FCA US LLC.
FIAT is a registered trademark of FCA Group Marketing S.p.A.,
used under license by FCA US LLC.