LL XX 55 55 55 11 - Mouser Electronics

LX5551
®
TM
2.4-2.5 GHz Front-End Module with Internally
Matched Power Amplifier & SPDT for 11b/g/n
P RODUCTION D ATA S HEET
KEY FEATURES
DESCRIPTION
The Rx path of LX5551 includes a
low-cost SPDT switch with excellent
insertion loss and isolation. It features a
very low Tx-to-Rx port leakage in
receive mode.
LX5551 is available in a 16-pin,
3x3mm micro-lead package (MLPQ16L). With its best-class performance
and compact footprint, LX5551 offers an
ideal front-end solution for the ever
demanding design requirements of
today’s WLAN systems,
including
802.11b/g and the latest 11n MIMO
implementation.
ƒ 2.4-2.5GHz 11b/g/n Front-End
Solution in a Single 3x3mm
MLP Package
ƒ All RF Ports Matched to 50 Ω
ƒ Single-Polarity 3.3V Supply
ƒ Tx Path Power Gain ~ 27dB
ƒ Rx Path Loss ~ 0.6dB
ƒ Pout ~ +18dBm at Antenna* for
EVM = 3%
ƒ Total Current ~140mA for
+18dBm with 90% Duty Cycle
ƒ Pout > +22dBm for 11b 1Mbps
DSSS Mask Compliance
2
ƒ Small Footprint: 3x3mm
ƒ Low Profile: 0.9mm
ƒ RoHS Compliant & Pb-Free
WWW . Microsemi .C OM
LX5551 is a high-performance
WLAN front-end module (FEM) for
802.11b/g/n and other applications in
the 2.4-2.5GHz frequency range.
LX5551 integrates an advanced
InGaP/GaAs Heterojunction Bipolar
Transistor (HBT) power amplifier with
both input/output impedance matching,
and an InGaAs pseudomorphic HEMT
(pHEMT) switch, into a single 3x3mm
package.
The Tx path of LX5551 features a
two-stage
monolithic
microwave
integrated circuit (MMIC) power
amplifier with active bias circuitry, and
50 Ω input/output matching inside the
package. With 3.3V supply voltage and
90mA nominal bias current, the Tx
path provides 27dB gain and +18dBm
linear output power, with extremely low
total EVM (<3%) for 64QAM/54Mbps
OFDM. Both gain and power are
readily measured at antenna port, with
switch insertion loss included.
* Including SPDT switch loss
APPLICATIONS
ƒ IEEE 802.11b/g
ƒ IEEE 802.11n MIMO
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
BLOCK DIAGRAM
Vref Vc
TxIn
Ctl1 Ctl2
Internal
OMN*
Det
Antenna
RxOut
Copyright © 2008
Rev. 1.0, 2008-12-17
LX5551
*OMN: Output Matching Network
Microsemi
Analog Mixed Signal Group
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 1
LX5551
®
TM
2.4-2.5 GHz Front-End Module with Internally
Matched Power Amplifier & SPDT for 11b/g/n
P RODUCTION D ATA S HEET
WWW . Microsemi .C OM
PRODUCT HIGHLIGHT
MSC
5551
720A
PACKAGE ORDER INFO
LQ
Plastic MLPQ
16 pin 3x3mm
RoHS Compliant /Pb-Free
LX5551LQ
Note: Available in Tape & Reel.
Append the letters “TR” to the part number.
(i.e. LX5551LQ-TR)
ABSOLUTE MAXIMUM RATINGS
PACKAGE PIN OUT
DC Supply Voltage, RF off (PA).......................................................................5V
(Switch) ................................................................5V
Collector Current (PA)................................................................................500mA
Total Power Dissipation....................................................................................2W
RF Input Power............................................................................................10dbm
Maximum Junction Temperature (Tj max) ................................................ +150°C
Operation Ambient Temperature ...................................................-40°C to +85°C
Storage Temperature....................................................................-65°C to +150°C
RoHs/Pb Free Peak Package Solder Reflow Temperature (40 seconds maximum
exposure)…………………………………………………….…..260°C(+0, -5)
16
15
Vc1 Open
14
13
TxIn
1
12
Vc2
Vref
2
11
Open
Det
3
10
PAOut
RxOut
4
9
5
6
Ctl1
Ant
7
SwIn
8
Ctl2 Optional
LQ PACKAGE
(“See-Through” View from Top)
THERMAL DATA
RoHS/Pb-free 100% Matte Tin Lead finish
LQ
Plastic MLPQ 16-Pin
THERMAL RESISTANCE-JUNCTION TO CASE, θJC
THERMAL RESISTANCE-JUNCTION TO AMBIENT, θJA
17°C/W
55.2°C/W
Junction Temperature Calculation: TJ = TA + (PD x θJA).
The θJA numbers are guidelines for the thermal performance of the device/pc-board system. All of the
above assume no ambient airflow.
Copyright © 2008
Rev. 1.0, 2008-12-17
Microsemi
Analog Mixed Signal Group
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 2
PACKAGE DATA
Note: Exceeding these ratings could cause damage to the device. All voltages are with respect to
Ground. Currents are positive into, negative out of specified terminal.
Vcc Open
TM
®
Thank you for your interest in Microsemi® Analog Mixed Signal products.
The full data sheet for this device contains proprietary information.
To obtain a copy, please contact your local Microsemi sales representative. The
name of your local representative can be obtained at the following link
http://www.microsemi.com/contact/contactfind.asp
or
Contact us directly by sending an email to:
IPGdatasheets@microsemi.com
Be sure to specify the data sheet you are requesting and include your company
name and contact information and or vcard.
We look forward to hearing from you.
Copyright
Microsemi
Analog Mixed Signal Group
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
WWW . Microsemi .C OM
INFORMATION
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Microsemi:
LX5551LQ