Product option:
EMC:
European Contact:
Harman Music Group
8760 South Sandy Parkway
Sandy, Utah
84070 USA
Ph: (801) 566-8800
Fax: (801) 568-7583
Your local DigiTech Sales and
Service Office or
Vice-President of Engineering
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
Date: February 22, 2002
The product herewith complies with the requirements of the
Low Voltage Directive 72/23/EEC and the EMC Directive
89/336/EEC as amended by Directive 93/68/EEC.
Supplementary Information:
IEC 60065 (1998)
EN 55013 (1990)
EN 55020 (1991)
Safety:
conforms to the following Product Specifications:
Multi Chorus
all (requires Class II power
adapter that conforms to the
requirements of EN60065,
EN60742, or equivalent.)
Product name:
declares that the product:
DigiTech
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
DECLARATION OF CONFORMITY
Manufacturer’s Name:
Manufacturer’s Address:
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Do not use this apparatus near water.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
7. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
8. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
9. Unplug this apparatus during lightning storms or when
unused for long periods of time.
10. No user serviceable parts inside. Refer all servicing to
qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
11.WARNING:To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or
moisture.
12. Refer to labels on the unit, including bottom cover, or
other markings and pertinent information.
For your protection, please read the following:
Warning
NOTE:The information contained in this manual is subject to change at any time without notification. Some
information contained in this manual may also be inaccurate due to undocumented changes in the product or
operating system since this version of the manual was completed.The information contained in this version
of the owner's manual supersedes all previous versions.
7.The foregoing is in lieu of all other warranties, expressed or implied, and DigiTech neither assumes nor
authorizes any person to assume any obligation or liability in connection with the sale of this product.
In no event shall DigiTech or its dealers be liable for special or consequential damages or from any
delay in the performance of this warranty due to causes beyond their control.
6.The consumer forfeits the benefits of this warranty if the product's main assembly is opened and tampered with by anyone other than a certified DigiTech technician or, if the product is used with AC voltages outside of the range suggested by the manufacturer.
5. DigiTech reserves the right to make changes in design, or make additions to, or improvements upon
this product without incurring any obligation to install the same on products previously manufactured.
4. Proof-of-purchase is considered to be the burden of the consumer.
3. DigiTech liability under this warranty is limited to repairing or replacing defective materials that show
evidence of defect, provided the product is returned to DigiTech WITH RETURN AUTHORIZATION,
where all parts and labor will be covered up to a period of one year (this warranty is extended to a
period of six years when the product has been properly registered by mail or through our website).
A Return Authorization number may be obtained from DigiTech by telephone.The company shall not
be liable for any consequential damage as a result of the product's use in any circuit or assembly.
2. DigiTech warrants this product, when used solely within the U.S., to be free from defects in materials
and workmanship under normal use and service.
1.The warranty registration card must be mailed within ten days after purchase date to validate this warranty.
WARRANTY: We at DigiTech are proud of our products and back-up each one with the following warranty:
3. AC Adapter Jack
Connect a DigiTech PS200R power supply to this jack. Use the proper
supply for your area’s Mains line voltage.
2. Speed Knob
Controls the rate that the chorus modulates. Turn this knob clockwise
to increase the rate, and counter-clockwise to decrease the rate.
1. Level Knob
Controls the output level of the effect. Turn this knob clockwise to
increase the output level, and counter-clockwise to decrease the output
level.
DigiTech has long been known as a leader in the guitar signal processing
industry. The Multi Chorus is a culmination of this expertise, bringing
you a breakthrough in chorus effect technology. Thanks to our
proprietary AudioDNA™ processor, the Multi Chorus is the only pedal
that provides up to16 independent voices of interactive chorusing. The
result is a lush wash of modulation that rivals any of the finest pedal and
rack chorus devices you have ever heard.
11
10
9
1
2 3 4
8
7
6
5
7. Pedal Release Pins
These two pins are spring-loaded hinges that hold the pedal in place.
6. Input Jack
Connect your instrument to this jack. Connecting a guitar cable to this
jack supplies battery power even though the Indicator LED may not be
lit. To prolong battery life, disconnect all cables from the pedal when not
in use.
5.Voice Knob
Controls the number of chorus voices used. At the knob’s minimum
position, only a single chorus voice is present. As the knob is turned
clockwise, more voices are brought in. At the maximum position of the
Voice knob, 16 voices are heard interacting with one another.
4. Depth Knob
Controls the depth of the chorus effect. Turn this knob clockwise to
increase the depth for a thick chorus sound, and counter-clockwise to
decrease the depth for a shallow, light chorus sound.
11. Out 2 Jack
Connect this output to a second amplifier for true stereo chorusing.
Stereo is the best way to get the most effective chorusing experience
from the Multi Chorus pedal.
10. Indicator LED
This LED indicates when the effect is turned on. If the LED becomes
dim or does not light when the cables are connected, the battery needs
to be replaced.
9. Out 1(Mono) Jack
Connect this output to a single guitar amplifier when only one amp is
being used.
8. Pedal
Press the pedal to turn the effect on and off.
Push these pins in to release the pedal from the pedal chassis exposing
the battery compartment. (See battery replacement diagram.)
CIT™ cabinet modeling has to be enabled each time you apply power to
the Multi Chorus.
To Enable CIT™ Cabinet Modeling:
Press the pedal down and apply power (connect a guitar cable to the
Multi Chorus input or connect the PS200R power supply to the AC
adapter jack).
The Multi Chorus also has built-in CIT™ cabinet modeling that can be
enabled. This is a useful tool when running a distortion pedal into the
Multi Chorus and then running direct into a mixer or recorder. This
creates a distortion-through-an-amplifier sound without having to use a
guitar amp.
Connections
The Multi Chorus has a single input and a pair of outputs. Out 1 is
used if the Multi Chorus is being connected to only one amplifier. Out
2 is used for stereo operation. Connect Out 1 to the first amplifier
and Out 2 to the second amplifier.
5. Push the opposite pin in and lower the other side of the pedal into
place over the depressed pin. Release the pin. When the pedal is
properly fastened, both release pins are flush with the outer side of
the pedal.
4. Place one hole of the pedal over its corresponding pin.
3. Connect a new battery to the battery cable and put it back in the
battery compartment. Make sure the battery cable does not interfere
with the spring or pedal switch arm.
2. Remove the battery from the battery compartment and disconnect
the battery cable.
Battery Replacement
1. Using the tip of a 1/4” guitar cable, push one of the release pins in on
either side of the pedal, and remove the pedal from the pedal chassis.
SPECIFICATIONS:
• Controls - Level, Speed, Depth,Voice,
On/Off Pedal
• Jacks - Input, Out 1 (Mono), Out 2
• Input Impedance - 1 MOhms
• Output Impedance - 100 Ohms
• Power Supply - 9V Alkaline Dry Battery
• Power Consumption - 4.8Watts
(w/optional PS200R power supply)
• Battery Life - Approximately 4 hours
(with continuous usage)
• Dimensions - 4 15/16”(L) x 3 1/8”(W)
x 2 1/8”(H)
• Weight - 1.38 lbs.
• Optional Power Supply
PS200R - 100 (100V ~ 50/60Hz)
PS200R - 120 (120V ~ 60Hz)
PS200R - 230 (230V ~ 50Hz)
PS200R - 240 (240V ~ 50Hz)
Printed in China
Please visit DigiTech
on the World Wide Web at:
www.digitech.com
Multi Chorus Digital Chorus
Owners Manual 18-1800V-A
Copyright - Harman Music Group
DigiTech and X-Series are trademarks
of the Harman Music Group Inc.
DigiTech
8760 South Sandy Parkway
Sandy, Utah 84070
PH (801) 566-8800
FAX (801) 566-7005