Product Bulletin: Fisher Vee-Ball V150, V200, and V300

Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Fisher™ Vee-Ball™ V150, V200, and V300
Rotary Control Valves
This bulletin covers the DN 25 through 600 (NPS 1
through 24) V150, V200 and V300 Vee-Ball control
valves. The Vee-Ball valve combines globe valve
ruggedness with the efficiency of a rotary valve. The
Vee-Ball valve is a segmented ball valve which features
a contoured segmented V-Notch ball. A shearing
action between the V-notch ball and the ball seal
(figure 1) promotes smooth, nonclogging operation.
The unrestricted straight-through flow design provides
high capacity for gas, steam, liquids, and fibrous
slurries.
V150, V200, and V300 valves mate with a variety of
ASME raised face flanges, as well as with EN flanges
(see Specifications).
X0187
To meet specific application requirements, a variety of
metal and soft ball seal materials are available. A
splined drive shaft combines with a variety of power
operated and manual actuators to provide reliable,
high-performance throttling or on-off operation for
many different applications in the process industries.
V150
Features
n Trim Versatility—Trim components are
interchangeable between V150, V200, and V300
valves. This feature allows you to reduce your spare
parts inventory and maintenance procedures. The
seal assembly can be changed without removing
the actuator or without removing the ball from the
valve body.
n Easy Installation—Flanged body design of the V150
and V300 eliminates exposed line flange bolting,
reduces alignment and installation time, and
promotes secure valve installations and piping
integrity. The V200 is available with flanges in NPS 2
through 8.
www.Fisher.com
X0337
V200
Typical Vee-Ball Valves with Fisher 2052 Actuators and
FIELDVUEt DVC6200 Digital Valve Controllers
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Specifications
(Bidirectional Flow): Class III per ANSI/FCI 70-2 and
IEC 60534-4
Flow Ring Construction (Bidirectional Flow): 5% of
valve capacity at full travel
Micro-Notch Ball with HD Seal: 4 SCFH (Leakage rate
equivalent to Class IV for standard ball. This is based
on the capacity of a standard ball.)
Valve Sizes
See table 1
Valve End Connection Styles
V150: Flanged valves that mate with CL150
raised-face flanges and EN 1092-1 Type B raised-face
and Type F Recess
Construction Materials
V200: Flangeless (all sizes) and flanged valves that
mate with CL600 raised-face flanges (NPS 2-8)
See tables 4 and 5
V300: Flanged valves that mate with CL300
raised-face flanges and EN 1092-1 Type B raised-face
and Type F Recess
Temperature Capabilities(1,2)
Composition Seals
Fisher TCM Plus: -46 to 232_C (-50 to 450_F)
Fisher TCM Ultra: -46 to 260_C (-50 to 500_F)
HD Metal Seals: -46 to 288_C (-50 to 550_F)
PEEK HD Seal: -46 to 232_C (-50 to 450_F)
High Temperature HD Metal Seal: 288 to 427_C (550
to 800_F). Contact your Emerson sales office or Local
Business Partner if higher temperatures are required.
Ceramic Micro-Notch Ball: -46 to 93_C (-50 to
200_F)(4)
Flow Ring or Flat Metal Seal : -198 to 425_C (-325 to
800_F)
PEEK/PTFE Bearings: -198 to 260_C (-325 to 500_F)
Maximum Inlet Pressures(1)
V150 or V300 WCC (or 1.0619 Steel), CF3M (or
1.4409 SST), CG8M, LCC, M35-2, CK3McuN, CD3MN,
and CD3MWCuN Valves: Consistent with CL150 for
V150 or CL300 for V300 pressure-temperature
ratings per ASME B16.34 or with PN
pressure-temperature ratings shown in table 1.
Note: CF3M is the standard material offering in
Europe and Asia-Pacific. 1.0619 Steel and 1.4409 SST
are also standard material offerings in Europe.
V200 WCC, CG8M, and LCC Valves: Consistent with
applicable pressure-temperature ratings in table 1 per
ASME B16.34.
Packing Constructions
PTFE V-ring: -46 to 232_C (-50 to 450_F)
Graphite: -198 to 538_C (-325 to 1000_F)
ENVIRO-SEALt Single PTFE V-ring: -46 to 232_C (-50
to 450_F) (for 100 ppm service requirements)
ENVIRO-SEAL Graphite: -7 to 316_C (20 to 600_F) (for
100 ppm service requirements). This packing
arrangement can be used to 371_C (700_F) for
non-environmental service.
CW2M: Consistent with applicable
pressure-temperature ratings shown in table 6.
Do not exceed the material temperature capabilities
shown below or the pressure drop limitations.
Maximum Shutoff Pressure/Temperature Ratings(1)
Composition (Fisher TCM Plus or TCM Ultra), Flat
Metal (NPS 3 through 12 valves only), HD and High
Temperature HD Metal Ball Seals and Flow Ring: See
table 8.
Flow Characteristic
Modified equal percentage
Shutoff Classification(1)
Dimensions
Fisher TCM Plus or Ultra Ball Seal (Forward Flow):
Class VI per ANSI/FCI 70-2 and per IEC 60534-4,
Flat Metal Ball Seal for NPS 3 through 12 only
(Forward Flow): Class IV per ANSI/FCI 70-2 and per IEC
60534-4,
HD (Heavy Duty) Ball Seal (Bidirectional Flow): 0.01%
of valve capacity; Class IV per ANSI/FCI 70-2 and IEC
60534-4; Maximum allowable pressure drop in
reverse flow is 6.9 bar (100 psi);
High Temperature HD (Heavy Duty) Ball Seal
See figures 7, 8, and 10 for dimensions
Face-to-Face Dimensions
J Standard Face-to-Face dimensions comply with ISA
S75.08.02
J ASME B16.10 short face-to-face dimensions are
available as an option for NPS 1 through 12 valves.
Note that ASME B16.10 short dimensions are longer
than ISA S75.08.02. See figure 11 for dimensions.
(continued)
2
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Specifications (continued)
Standard Flow Direction
Forward (into the convex face of the V-notch ball)
Flow Coefficients, Flow Coefficient Ratio(3), and
Noise Levels
See Fisher Catalog 12
Maximum Ball Rotation
90 degrees
Actuator Mounting
Standard valve construction is for right-hand
mounting, as viewed from upstream end of valve.
Left-hand (optional) mounting is available upon
request(5)
Valve/Actuator Action
With diaphragm or piston rotary actuator, the valve is
field-reversible between PDTC or PDTO:
J push-down-to-close (extending actuator rod closes
valve) and J push-down-to-open (extending
actuator rod opens valve)
Approximate Weight
See table 2
Options
J Pipe plug at end of follower shaft for all sizes,
J Line flange bolting, J Materials that are
compatible with sour service, J Alloy construction
materials, J ENVIRO-SEAL packing system: See figure
6 and Bulletin 59.3:041, ENVIRO-SEAL Packing
Systems for Rotary Valves (D101638X012) for more
information, J Micro-Notch construction for
NPS 1 valves (see Micro-Notch Construction section),
J Alloy trim material , J Chrome Carbide coated
internals (NPS 2 through 12), J Rotary attenuator to
reduce aerodynamic noise and cavitation effects,
J Double D, Square, and Keyed shaft options
1. The pressure/temperature limits in this bulletin, and any applicable code or standard limitation, should not be exceeded.
2. Additional limits are shown in tables 6, 7 and 8.
3. Ratio of maximum flow coefficients to minimum usable flow coefficient can also be called rangeability.
4. For the CG8M and alloy 6 Micro-Notch constructions, pressure and temperature capabilities are the same as for standard constructions.
5. True left-hand mount is not available for Micro-Notch constructions, as it will cause the ball to rotate to the bottom of the valve body.
Table of Contents
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Series B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Micro-Notch Construction . . . . . . . . . . . . . . . . . . . . . . 8
Severe Service Attenuator . . . . . . . . . . . . . . . . . . . . . . 9
Pressure Drops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3
Product Bulletin
51.3:Vee-Ball
August 2017
Features (continued)
n Application Versatility—The valves are available with
ISA S75.08.02 and IEC 534-3-2 face-to-face
dimensions as a standard construction, and
optional ASME B16.10 short face-to-face
dimensions. IEC 534.3.2 face-to-face dimensions
are equivalent to S75.08.02 face-to-face
dimensions.
Vee-Ball Valves
D101363X012
n Sour Service Capability—Materials are available for
applications involving sour liquids and gases. These
constructions comply with NACE MR0175-2002,
MR0175-2003, MR0103, and MR0175/ISO 15156.
n Quick and Easy Maintenance—Ball seal inspection
and replacement is done at the valve body inlet
without removing the actuator or disassembling the
valve. Valve maintenance requires no special tools.
n Smooth Valve Operation—Precision machined parts
n Long Service Life—The solid HD ball seal (figures 1
and 2) construction provides long service life in
demanding applications. The constant wiping
action of the seal across the ball's sealing surface
prevents scale and sludge buildup, and provides
excellent service on steam, gases, slurries, and
various liquid applications.
and pressure balanced seal designs allow smooth,
precise movement of the ball.
n Structural Integrity—One-piece valve body improves
structural integrity of the pressure boundary by
eliminating leak paths that could be caused by the
gaskets in two-piece, bolted valve designs.
n Exceptional Environmental Capabilities—The
n Excellent Flow Control—Precise contouring of the
Vee-Ball provides a modified equal percentage flow
characteristic. For very precise control of low flow
rates, the Micro-Notch option is available on the
NPS 1 valve. See the Micro-Notch Construction
section of this bulletin for more information.
4
optional ENVIRO-SEAL packing systems are
designed with very smooth shaft surfaces and live
loading to provide exceptional sealing. The seal of
the ENVIRO-SEAL system can restrict emissions to
less than the EPA (Environmental Protection
Agency) limit of 100 ppm (parts per million).
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Table 1. Valve Body Materials, End Connections, and Ratings
VALVE DESIGN
VALVE BODY MATERIAL
WCC
RATINGS
ASME / PN
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10, 12, 14, 16, 20, 24x20(5)
CL150
DN 80, 100, 150
PN 10-16
DN 200, 250, 300
PN 10 or PN 16
WCC / 1.0619(1)
V150
SIZE
NPS / DN
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10, 12
CL150
LCC
DN 80, 100, 150
PN 10-16
DN 200, 250, 300
PN 10 or PN 16
CF3M(2)
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10, 12
CL150
DN 80, 100, 150
PN 10-16
DN 200, 250, 300
PN 10 or PN 16
CF3M/1.4409(1)
CG8M
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10, 12, 14, 16, 20, 24x20(5)
CW2M
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10, 12
M35-2
NPS 1, 1-1/2, 2, 3, 4, 6, 8
CD3MN(3)
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10, 12
CD3MWCuN(3)
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10, 12
CK3MCuN
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10, 12
NPS 1, 1-1/2, 2
CL150/300/600 flangeless
NPS 3, 4
CL150 and CL300/600
flangeless
NPS 6, 8
CL150/300 and CL600
flangeless
NPS 10
CL150 flangeless
WCC, LCC, CG8M, or CF3M(2)
V200(4)
WCC, LCC, or CG8M
NPS 2, 3, 4, 6, 8
CL600
CW2M, M35-2, or CK3MCuN
NPS 1, 1-1/2, 2, 3, 4, 6, 8
CL150/300/600 flangeless
CK3MCuN
NPS 10
CL150 flangeless
WCC
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10, 12, 14, 16, 20
CL300
DN 25, 40, 50
PN 10-40
WCC / 1.0619(1)
LCC
V300
CL150
CF3M(2)
CF3M/1.4409(1)
DN 80, 100, 150
PN 25-40
DN 200, 250, 300
PN 25 or PN 40
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10, 12
CL300
DN 25, 40, 50
PN 10-40
DN 80, 100, 150
PN 25-40
DN 200, 250, 300
PN 25 or PN 40
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10, 12
CL300
DN 25, 40, 50
PN 10-40
DN 80, 100, 150
PN 25-40
DN 200, 250, 300
PN 25 or PN 40
CG8M
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10, 12, 14, 16, 20
CW2M
NPS 1, 1-1/2, 2, 3, 4, 6, 8
M35-2
NPS 1, 1-1/2, 2, 3, 4, 6, 8
CD3MN(3)
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10, 12
CD3MWCuN(3)
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10, 12
CK3MCuN
NPS 1, 1-1/2, 2, 3, 4, 6, 8, 10, 12
CL300
1. WCC and EN Stl 1.0619 are dual certified. CF3M and EN SST 1.4409 are dual certified.
2. CF3M is a standard offering in Europe and Asia Pacific.
3. NORSOK compliant materials available upon request.
4. Flangeless V200 assemblies mate with raised-face flanges.
5. Valve body mates with NPS 24 ASME CL150 flanges. Internal based on NPS 20 valve design.
5
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Figure 1. Vee-Ball Construction Features, Seals (Fisher V150 Shown)
SEAL
PROTECTOR
RING
SEAL PROTECTOR
RING
BODY
HD SEAL
RADIAL
SEAL
SPRING
SEAL
FLAT
METAL
BALL
SEAL
V-NOTCH
BALL
W4713-3
SHIMS
BODY
VIEW A
FLAT METAL BALL SEAL DETAIL
FOR DN 80 THROUGH 300
(NPS 3 THROUGH 12)
WAVE
SPRING
V-NOTCH BALL
W5704-1
VIEW A
HD BALL SEAL DETAIL
SEAL PROTECTOR
RING
SEAL
PROTECTOR
RING
TCM
BALL SEAL
V-NOTCH
BALL
BODY
W6197-1
VIEW A
FISHER TCM PLUS BALL SEAL
DN 25, 40, AND 50
(NPS 1, 1-1/2, AND 2) VALVES
BACKUP
RING
VIEW A
FLOW RING DETAIL
SEAL
PROTECTOR
RING
SEAL
PROTECTOR RING
RETAINING
RINGS
PISTON
RING
PISTON RING
HD
METAL SEAL
WAVE
SPRING
HD
METAL
SEAL
WAVE
SPRING
RETAINING RING
(USE ONLY WHEN
ATTENUATOR IS
USED)
W8479
DN 25, 40, AND 50
(NPS 1, 1-1/2 AND 2)
HD BALL SEAL
DN 8 THROUGH 200 AND DN 350 THROUGH 600x500
(NPS 3 THROUGH 8 AND NPS 14 THROUGH 24x20)
HD BALL SEAL
VIEW A
HIGH-TEMPERATURE HD BALL SEAL
6
DN 250 AND 300
(NPS 10 AND 12)
HD BALL SEAL
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Figure 2. Vee-Ball Construction Features (Fisher V150 Shown)
V-NOTCH BALL
SEE VIEW A
(FIGURE 1)
SEAL
PROTECTOR
RING
GASKET
FOLLOWER
SHAFT
GROOVE PIN
BODY
DRIVE SHAFT
BEARING
TAPER KEY
PACKING FOLLOWER
W7435
DN 80 THROUGH 300
(NPS 3 THROUGH 12) VALVES
(HD BALL SEAL SHOWN)
HD BALL SEAL
BOTTOM
FLANGE
PACKING FLANGE
AND PACKING FOLLOWER
PIN
W6099-1
DN 350, 400, 500 and 600x500
(NPS 14, 16, 20, and 24x20) VALVES
(HD BALL SEAL)
7
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Table 2. Valve Weights, Approximate
VALVE SIZE
V150
V200
V300
DN
NPS
kg
lbs
kg
lbs
kg
lbs
25
1
5.6
13
4.5
10
8
17
40
1-1/2
8.2
19
6.4
14
12
27
50
2
9.1
21
10
23
17
38
80
3
13
43
15
34
28
61
100
4
26
57
22
48
37
81
150
6
42
93
36
80
60
133
200
8
72
158
62
136
103
226
250
10
107
235
114
252
200
440
300
12
157
347
---
---
293
645
350
14
247
545
---
---
374
825
400
16
333
735
---
---
510
1125
500
20
524
1155
---
---
755
1661
600x500
24x20
757
1666
---
---
---
---
Series B
NPS 3 through 12 have been changed to reduce parts
and to improve control performance. The V-notch Ball
now resembles the NPS 14 through 24x20 V-notch
Ball. The pressed-in bushings have been eliminated, as
well as the thrust washer.
Micro-Notch Construction
For very precise control of low flow rates, the
Micro-Notch construction (see figure 3) is available on
DN 25 (NPS 1) valves. Three Micro-Notch ball materials
are available: chrome-plated CG8M (317 stainless
steel), solid alloy 6, and solid VTC ceramic. A VTC
ceramic HD seal is standard with the VTC ceramic ball.
For the CG8M and alloy 6 constructions, pressure and
temperature capabilities are the same as for standard
constructions. For the ceramic construction,
maximum temperature is 93_C (200_F).
8
Figure 3. Typical Micro-Notch Ball and Shaft
MICRONOTCH
VEE BALL
DRIVE SHAFT
W6256
For further information, please refer to the Fisher
Vee-Ball V150, V200 and V300 Rotary Control Valves
NPS 1 through 12 instruction manual (D101554X012).
In addition to the standard Micro-Notch
offering, options are available in both low
(Micro-Scratch) and high (Macro-Notch)
flow construction. Contact your Emerson sales office
or Local Business Partner for more information.
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Severe Service Attenuator
Fisher Vee-Ball series valves (V150, V200, and V300),
with the severe service attenuator, combine the
efficiency of a rotary valve with the energy absorbing
capability of a special trim to provide improved
performance for demanding applications. The Fisher
attenuator design can be utilized in both liquid and gas
service to reduce cavitation and noise effects that
cause pipeline vibration. See table 3 for a competitive
comparison.
The attenuator will not change the NACE compliance
of the Vee-Ball valve. When a rotary noise attenuator is
installed in a Vee-Ball valve, the V-Notch is no longer a
point of high-velocity erosion. As a result, the CoCr-A
V-Notch option is not required when a rotary
attenuator is used. The rotary attenuator and CoCr-A
V-Notch options are not available together.
n Attenuator-Ball Fabrication — The ball-attenuator
construction provides structural integrity because
of its rugged fabrication weld.
n Attenuator Performance — Up to -10 dBA acoustical
attenuation, and a Kc = 1.0 for hydrodynamics are
achievable depending on service conditions.
Attenuator Ball Material
Standard attenuator ball material is CG8M, M35-1,
CW2M, or CK3McuN.
Standard Flow Direction
Forward flow direction is into the convex face of the
V-notch ball. The valve with the attenuator must be
placed in the forward flow direction for the attenuator
to be effective.
Features
n Trim Versatility — Trim components are
interchangeable for Fisher V150, V200, and V300
valves. This feature allows you to reduce your spare
parts inventory and maintenance procedures.
Actuator Mounting
Right-hand or left-hand as viewed from the upstream
end of the valve. Counter-clockwise to close for both
mounting styles.
9
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Figure 4. Fisher Vee-Ball Series Noise Attenuator Ball
Figure 5. Fisher Vee-Ball Series Rotary Attenuator
Construction
W6116-1
W6129-1
Table 3. Segmented Ball Benefits Analysis Comparison
10
Benefits
Typical Competitive
Device
Fisher Vee-Ball
Attenuator
Predictable Performance
No
Yes
-10 dBA Aerodynamic Noise Attenuation
No
Yes
Superior Attenuation Effect at Critical Opening Position
No
Yes
Maximum Pressure Drop Capability
No
Yes
Heavy Duty, Integrally Welded Attenuator/Ball Assembly
No
Yes
Valve Splined Shaft Connects to Clamped Actuator Lever to Minimize Lost Motion
No
Yes
Superior Soft Seats for Tight Shutoff
No
Yes
Moderate Kc Improvement vs Unattenuated Device
Yes
Yes
Trunnion Mounted Ball for Superior Wear Resistance
Yes
Yes
Heavy Duty Metal Seats for Demanding Applications
Yes
Yes
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Table 4. Materials of Construction for DN 25 through 300 (NPS 1 through 12) Valves
PART
MATERIAL
Valve Body and Seal
Protector Ring or
Flow Ring
WCC steel (EN 1.0619), CG8M (317 SST), CF3M(1) (316L SST EN 1.4409 or optional
EN 1.4581), CD3MN, CD3MWCuN, CW2M (CW2M valve available with Fisher TCM Plus
seal only), M35-2 or CK3MCuN
Backup Ring [DN 25, 40, and 50 (NPS 1, 1-1/2, and 2) only]
CG8M, CF3M(1), or CW2M
Segmented V-Notch Ball
CG8M, CF3M, CW2M, chromium-plated CF3M, chromium-plated CG8M,
chromium-plated CG8M with alloy 6 notch, chromium-plated CF3M with alloy 6 notch,
chromium-plated CD3MN, chromium-plated CD3MWCuN, M35-1, or CK3MCuN
Seal
Fisher TCM
Fisher TCM Plus and Fisher TCM Ultra
Flat Metal Seal, Shims, and Spring Seal(7)
Spring Tempered S31600 (316 stainless steel) or
Spring Tempered S30200 (302 stainless steel) for NPS 12 valves only
HD (Heavy-Duty) Ball Seal
CF10SMnN(2) , CD7MCuN(3) (alloy 255
duplex stainless steel) or R30006 (Alloy 6)
High Temperature HD Seal
R30006 (Alloy 6)
Wave Spring (use with HD seal)
N07750
HD Seal Radial Seal
Graphite reinforced PTFE
High Temp HD Seal Piston Ring
Graphite FMS 17F39
Bearings
PEEK(4)/Carbon-filled PTFE liner, S31603 Nitride,
R30006 (alloy 6), silver-plated R30006,
N10276 with carbon-filled PTFE liner, or N10276 with glass-filled PTFE liner
Seal Retainer Gasket
Laminated graphite
Packing
PTFE V-ring with one carbon-filled PTFE ring(5), PTFE V-ring, graphite ribbon,
ENVIRO-SEAL PTFE, or ENVIRO-SEAL graphite
Shafts
S20910, S17400 (17-4PH stainless steel),
N10276, N05500, S31254(8), or S32760(8)
Groove Pin
S31600 or N10276
Taper Key
R30006(6), S20910, or N10276
Taper Pin [DN 25, 40, and 50 (NPS 1, 1-1/2, and 2) only]
S20910 or N10276
Pipe Plug (Optional)
S31600 N10276, or S31603 (316L stainless steel)
Seal Retainer Screws and Washers
Stainless steel
Packing Follower and Packing Box Ring
CF8M (316 stainless steel), N10276, S312254, or N10276
with separate S31600 packing box flange
Actuator Mounting Bolts and Nuts
Grade 5 steel or strain-hardened B8M stainless steel
Spacer and Bushing
S31700, N10276, or S31603
Packing Follower Bolting and Optional Line Bolting
SA-193-B7, SA-193-B7M, or strain-hardened SA-193-B8M
Attenuator(9)
CG8M, M35-1, CW2M, or CK3MCuN
1. CF3M is available in all areas as a special order and is the standard material offered in Europe.
2. Recommended for lubricated and non-lubricated service and where corrosion properties similar to 304 stainless steel are acceptable.
3. Recommended for lubricated service and where corrosion properties equal to or better than 317 stainless steel are required.
4. PEEK is poly-ether-ether-ketone.
5. The carbon-filled PTFE ring is used for grounding.
6. Standard material offered in North America.
7. Offered for lubricated service only.
8. S31254 and S32760 shafts may cause the valve to be derated. Contact your Emerson sales office or Local Business Partner.
9. Attenuator material will match segmented V-Notch ball material.
11
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Table 5. Materials of Construction for DN 350, 400, 500, and 600x500 (NPS 14, 16 20, and 24x20) Valves
PART
MATERIAL
Valve Body, Seal Protector Ring, and Flow Ring
WCC steel or CG8M (317 stainless steel)
Segmented V-Notch Ball
Chromium-plated CG8M, CG8M, Chromium-plated CG8M with alloy 6 notch
Ball Seal
Fisher TCM
Fisher TCM Plus and Fisher TCM Ultra
HD (Heavy-Duty Metal)
CF10SMnN(1) , CD7MCuM(2) (alloy 225 duplex stainless steel) or CG8M/CoCr-A
Wave Spring (use with HD seal)
N07750
Radial Seal (use with HD seal)
PTFE with N10276 spring
Bearings
PEEK/PTFE(3), S44004 (440C stainless steel--use with S17400 [17-4PH stainless steel]
shafts, alloy 6B, and silver plated alloy 6B
Thrust Washer (use with metal bearings)
Alloy 6B
Seal Retainer Gasket
Laminated Graphite
Packing
PTFE V-ring with one conductive V-ring(4), PTFE V-ring, graphite ribbon, ENVIRO-SEAL
PTFE, or ENVIRO-SEAL graphite
Shafts
S17400 (17-4 stainless steel) or S20910
Pins
S20910
Pipe Plug
S31700 (317 stainless steel)
Packing Follower Bolting
B7M steel or strain-hardened B8M stainless steel
Retainer Screw
B8M stainless steel
Packing Follower and Packing Box ring
S31600 (316 stainless steel)
Packing Flange
Steel or S31600
Actuator Mounting Bolts and Nuts
Grade 5 steel or strain-hardened B8M stainless steel
Gasket (used with bottom flange)
S31603 (316L stainless steel) spiral wound
Stud and Hex Nut (used with bottom flange)
B7 steel or strain-hardened B8M stainless steel
Attenuator
CG8M
1. Recommended where corrosion properties similar to 304 stainless steel are acceptable.
2. Recommended for lubricated service and where corrosion properties equal to or better than S31700 stainless steel.
3. PEEK (Poly-ether-ether-ketone) w/PTFE liner.
4. A carbon-filled PTFE ring is used for grounding.
Figure 6. Typical ENVIRO-SEAL Packing Arrangements
PACKING
BOX STUD
SPRINGS
PACKING
FLANGE
VALVE
BODY
ANTIEXTRUSION
RINGS
VALVE
SHAFT
PACKING
FLANGE
PACKING
BOX RING
PTFE
PACKING
V-RINGS
SHOWN
PACKING
FOLLOWER
W5806-2
12
PTFE PACKING
VALVE
SHAFT
SPRINGS
PACKING
FOLLOWER
W6125-1
GRAPHITE PACKING
PACKING
BOX
RING
GRAPHITE
PACKING
SET
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Table 6. Maximum Allowable Inlet Pressure for CW2M Valves
CW2M(1)
TEMPERATURE
150(2)
300(2)
PN 10(2)
_C
PN 16(2)
PN 25(2)
PN 40(2)
16.0
15.9
15.1
15.1
14.6
14.6
25.0
24.8
23.6
23.6
22.9
22.9
40.0
39.6
37.8
37.8
36.6
36.6
232
230
219
212
212
362
359
342
331
331
580
575
548
530
530
Bar
–46 to 38
50
100
150
200
232
20.0
19.5
17.7
15.8
13.8
12.7
51.7
51.7
51.5
50.3
48.3
47.0
10.0
9.9
9.4
9.4
9.1
9.1
290
260
230
200
185
750
750
730
700
680
145
144
137
133
133
_F
Psi
–50 to 100
200
300
400
450
1. This material is not listed in EN 12516‐1 or ASME B16.34. Also see the Installation section.
2. The designations PN or 150 and 300 are used only to indicate relative pressure‐retaining capabilities and are not EN or ASME pressure‐temperature rating class designations.
Pressure Drops
Pressure drop limits of any given valve are based on
valve body, and trim material limits. To find the
appropriate pressure drop limitation, choose the
desired valve size and temperature range. Then search
table 7 for body limitations and table 8 for trim
limitations. Information on limits for S31254, CW2M,
M35-2, CD3MN, CD3MWCuN, and other alloy
constructions can be obtained by contacting your
Emerson sales office or Local Business Partner. The
lowest number from the tables is the appropriate limit.
The tables for both trim and body limits must be
consulted.
Table 7. Maximum Allowable Shutoff Pressure Drops (Body Ratings) based on Carbon Steel and Stainless Steel Valve
Body Types. (The tables for both trim and body limits must be consulted.)
TEMPERATURE
RANGE
PRESSURE CLASS
WCC
CL150
CF3M
CL150
CG8M
CL150
LCC
CL150
WCC
CL300
CF3M
CL300
CG8M
CL300
LCC
CL300
WCC
CL600
CF3M
CL600
CG8M
CL600
LCC
CL600
-46 to -29
---
15.9
19.0
20
---
41.4
-29 to 38
20.0
15.9
19.0
20
49.6
51.7
41.4
49.6
51.7
---
82.7
99.3
103
51.7
103
82.7
99.3
93
17.9
13.4
16.2
17.9
51.7
34.8
103
42.7
51.7
103
70.0
85.5
149
15.9
12.1
14.8
15.9
50.3
103
31.4
38.6
50.3
100
62.7
77.2
204
13.8
11.0
13.4
13.8
100
48.6
28.6
35.5
48.6
97.2
56.9
70.6
97.2
232
260
12.8
10.7
12.8
11.7
10.0
11.7
12.8
47.2
27.9
34.5
47.2
94.5
54.8
68.6
94.5
11.7
45.9
26.2
33.1
45.9
91.7
52.7
65.8
316
10.7
9.9
91.7
10.7
10.7
43.8
25.5
32.1
43.8
87.6
51.0
64.1
343
9.65
87.6
9.7
8.62
9.65
41.7
23.8
31.0
41.7
83.4
49.6
62.4
371
83.4
8.62
8.6
7.58
---
40.7
23.8
30.7
---
81.0
48.3
60.0
---
399
6.55
6.6
6.55
---
34.8
23.1
29.3
---
69.6
46.2
58.9
---
427
5.52
5.5
5.52
---
28.3
22.8
29.0
---
56.9
45.5
58.3
---
_C
Bar
_F
Psi
-50 to -20
---
230
275
290
---
600
720
750
---
1200
1440
1500
-20 to 100
290
230
275
290
750
600
720
750
1500
1200
1440
1500
200
260
195
235
260
750
505
620
750
1500
1015
1240
1500
300
230
175
215
230
730
455
560
730
1455
910
1120
1455
400
200
160
195
200
705
415
515
705
1410
825
1025
1410
450
185
155
185
185
685
405
500
685
1370
795
995
1370
500
170
145
170
170
665
380
480
665
1330
765
955
1330
550
155
143
155
155
635
370
465
635
1270
740
930
1270
600
140
140
140
140
605
360
450
605
1210
720
905
1210
650
125
125
125
125
590
350
445
590
1175
700
890
1175
700
110
110
110
---
570
345
430
---
1135
685
870
---
750
95
95
95
---
505
335
425
---
1010
670
855
---
800
80
80
80
---
410
330
420
---
825
660
845
---
13
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Table 8. Maximum Allowable Shutoff Pressure Drops based on Trim (Bearing and Seal)
(Note: Do not exceed the PN or ASME pressure/temperature rating of the valve or mating flanges)
VALVE SIZE, DN
BEARING
MATERIAL
BALL SEAL
40
50
80
100
150
200
250
300
350
500(4)
400
Bar
Shaft Size, Inches
1/2
5/8
5/8
3/4
3/4
1
1-1/4
1-1/4
1-1/2
1-3/4 2-1/8x2 2-1/8 2-1/2
-46 to 38
51.7
51.7
51.7
51.7
51.7
51.7
51.7
40.2
37.6
31.0
23.8
31.0
31.0
93
37.9
37.9
37.9
37.9
37.9
37.9
37.9
37.9
37.6
31.0
23.8
31.0
31.0
149
24.1
24.1
24.1
24.1
24.1
24.1
24.1
24.1
24.1
24.1
23.8
24.1
24.1
204
10.3
10.3
10.3
10.3
10.3
10.3
10.3
10.3
10.3
10.3
10.3
10.3
10.3
232
3.45
3.45
3.45
3.45
3.45
3.45
3.45
3.45
3.45
3.45
3.45
3.44
3.45
HD Seal(1)
-46 to 260
51.7
51.7
51.7
51.7
51.7
51.7
51.7
40.9
38.1
31.0
26.5
31.0
31.0
Flat Metal(2)
-73 to 260
---
---
---
20.7
20.7
20.7
20.7
10.3
10.3
---
---
---
---
Flow Ring
260
103.4
103.4
103.4
103.4
72.4
75.2
73.8
40.5
37.7
40.5
35.0
48.8
44.7
-46 to 288
51.7
50.0
25.7
17.5
Fisher TCM Plus or Ultra
PEEK/PTFE
HD Seal(1)
R30006
TEMPERATURE
RANGE, _C
25
11.0
10.9
11.2
6.14
5.72
6.14
7.52
7.51
6.83
228 to 427 38.3(3) 37.5(3) 19.3(3) 13.2(3)
8.3(3)
8.2(3)
8.4(3)
4.6(3)
4.3(3)
4.62
5.65
5.65
5.10
Flat Metal(2)
-73 to 427
---
---
---
17.0
10.1
10.7
10.6
5.86
5.52
---
---
---
---
Flow Ring
427
74.5
49.6
26.8
18.8
10.9
11.2
11.1
6.07
5.65
6.07
7.31
7.30
6.69
-46 to 288
51.7
51.7
51.7
35.0
22.1
21.8
22.5
High Temp HD Seal(1)
HD Seal(1)
12.3
11.4
12.3
13.2
15.0
13.7
228 to 427 38.3(3) 38.3(3) 38.3(3) 26.3(3) 16.5(3) 16.3(3) 16.9(3)
9.2(3)
8.6(3)
9.16
11.2
11.2
10.2
Flat Metal(2)
-73 to 427
---
---
---
20.7
20.1
20.7
20.7
10.3
10.3
---
---
---
---
Flow Ring
427
103.4
103.4
53.5
37.6
21.8
22.5
22.2
12.1
11.3
12.1
14.6
14.6
13.4
HD Seal(1)
-46 to 288
51.0
51.0
51.0
51.7
36.7
36.3
37.4
20.5
19.1
20.5
25.0
25.0
14.0
High Temp HD Seal(1)
228 to 427
---
---
---
15.3
18.7
18.7
17.0
Flat Metal(2)
-73 to 427
---
---
---
20.7
20.7
20.7
20.7
10.3
10.3
---
---
---
---
Flow Ring
427
99.3
99.3
88.9
62.7
36.3
37.4
37.0
20.2
18.8
20.2
24.3
24.3
22.3
TEMPERATURE
RANGE, _F
1
1-1/2
2
3
4
6
10
12
14
R30006
Silver
Plated
High Temp HD Seal(1)
S31603L
Nitride
38.3(3) 27.6(3) 27.2(3) 28.1(3) 15.4(3) 14.3(3)
VALVE SIZE, NPS
BEARING
MATERIAL
BALL SEAL
20(4)
16
Shaft Size, Inches
1/2
5/8
5/8
3/4
3/4
1
1-1/4
1-1/4
1-1/2
-50 to 100
750
750
750
750
750
750
750
583
545
450
345
450
450
200
550
550
550
550
550
550
550
550
545
450
345
450
450
300
350
350
350
350
350
350
350
350
350
350
345
350
350
400
150
150
150
150
150
150
150
150
150
150
150
150
150
450
50
50
50
50
50
50
50
50
50
50
50
50
50
HD Seal(1)
-50 to 500
750
750
750
750
750
750
750
593
553
450
384
450
450
Flat Metal(2)
-100 to 500
---
---
---
300
300
300
300
150
150
---
---
---
---
Flow Ring
500
1500
1500
1500
1500
1050
1090
1070
587
547
587
508
708
648
99
Fisher TCM Plus or Ultra
PEEK/PTFE
R30006
8
Psi
1-3/4 2-1/8x2 2-1/8 2-1/2
HD Seal(1)
-50 to 550
750
725
373
254
160
158
163
89
83
89
109
109
High Temp HD Seal(1)
550 to 800
555(3)
544(3)
280(3)
191(3)
120(3)
119(3)
122(3)
67(3)
62(3)
67
82
82
74
Flat Metal(2)
-100 to 800
---
---
---
246
146
155
154
85
80
---
---
---
---
Flow Ring
800
1080
720
388
273
158
163
161
88
82
88
106
106
97
HD Seal(1)
-50 to 550
750
750
750
508
320
316
326
178
166
178
192
218
198
R30006
Silver
Plated
High Temp HD Seal(1)
550 to 800
555(3)
555(3)
555(3)
381(3)
240(3)
237(3)
245(3)
134(3)
125(3)
133
163
163
148
Flat Metal(2)
-100 to 800
---
---
---
300
292
300
300
150
150
---
---
---
---
Flow Ring
800
1500
1500
776
546
316
326
322
176
164
176
212
212
194
HD Seal(1)
-50 to 550
740
740
740
750
533
527
543
297
277
297
363
363
203
S31603L
Nitride
High Temp HD Seal(1)
550 to 800
---
---
---
555(3)
400(3)
395(3)
407(3)
223(3)
208(3)
222
272
272
247
Flat Metal(2)
-100 to 800
---
---
---
300
300
300
300
150
150
---
---
---
---
Flow Ring
800
1440
1440
1290
910
527
543
537
293
273
293
353
353
323
1. Pressure drops shown for HD seals are for forward flow only. For reverse flow with HD seal, limit pressure drop to 6.9 bar (100 psig).
2. Lubricated service only.
3. Consult your Emerson sales office or Local Business Partner if higher pressure drops are required.
4. This column is also appropriate for the DN 600x500 (NPS 24x20).
14
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Table 9. Fisher V150 Dimensions
VALVE
SIZE
V150 DIMENSIONS (ISA S75.08.02)(1)
S
Diameter
G
K
M(3,4)
56
62
67
188
83
90
87
95
121
127
79
92
100
73
80
87
13
15.9 and 15.9 x 12.7
15.9 and 15.9 x 12.7
117
---
14.2
5.9
8.6
9.5
165
194
229
79
101
109
214
100
133
151
130
141
164
106
119
127
100
100
114
19.1
19.1
25.4
152
31.8
14.2
14.2
14.2
19.5
26
42
200
250
300
243
297
338
124
147
174
208
184
222
268
232
260
303
133
146
152
127
133
133
31.8
31.8
38.1
235
46.0
17.5
72
107
158
350(2)
400(2)
500
600x500
NPS
381
406
508
608
206
229
235
373
356
295
330
406
406
343
365
457
457
152
152
178
192
133
133
159
171
Inch
44.5
54.0
63.5
63.5
273
273
337
337
50.8
50.8
76.2
76.2
19.1
19.1
22.4
22.4
1
1-1/2
2
4.00
4.50
4.88
2.21
2.46
2.63
7.38
3.19
3.38
4.19
3.75
4.75
5.00
3.12
3.62
3.94
2.88
3.12
3.44
1/2
5/8 and 5/8 x 1/2
5/8 and 5/8 x 1/2
4.62
---
0.56
13
19
21
3
4
6
6.50
7.62
9.00
3.10
3.99
4.29
8.44
4.62
5.25
5.94
5.12
5.56
6.44
4.19
4.69
5.00
3.94
3.94
4.50
3/4
3/4
1
6.00
1.25
0.56
0.56
0.56
43
57
93
8
10
12
9.56
11.69
13.31
4.88
5.77
6.87
8.19
7.69
8.75
10.56
9.12
10.25
11.94
5.25
5.75
6.00
5.00
5.25
5.25
1-1/4
1-1/4
1-1/2
9.25
1.81
0.69
158
235
347
14(2)
16(2)
20
24x20
15.00
16.00
20.00
23.94
8.12
9.00
9.25
14.69
14.00
11.62
13.00
16.00
16.00
13.50
14.38
18.00
18.00
6.00
6.00
7.00
7.56
5.25
5.25
6.25
6.75
1-3/4
2-1/8
2-1/2
2-1/2
10.75
10.75
13.25
13.25
2.00
2.00
3.00
3.00
0.75
0.75
0.88
0.88
545
735
1155
1666
B
25
40
50
102
114
124
80
100
150
DN
N(3)
APPROXIMATE
WEIGHT
D
A
T
U
W
mm
kg
248
333
525
757
lbs
1. Inlet flange stud bolt length is longer than the standard length specified in ASME B16.5. See dimension M below.
2. DN 350 and 400 (NPS 14 and 16) valves are available in ASME B16.10 short, only. See dimension A for ASME B16.10 short shown in figure 11.
3. Clearance necessary to remove flange bolts.
4. DN 25 and NPS 1 constructions have threaded inlet flange holes.
Figure 7. Fisher V150 Dimensions (also see table 9)
MATCHES
CL150
RF FLANGES OR
PN 10 AND 16
U
S DIA
N
M
B
A
G
K
D
T
T
W
W
DN 25 THROUGH 80
(NPS 1 THROUGH 2)
DN 80
THROUGH 600x500
(NPS 3 THROUGH 24x20)
11B2625-K
B2153-5
15
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Table 10. Fisher V200 Flangeless Dimensions(1)
VALVE
SIZE,
NPS
V200 DIMENSIONS (ISA S75.08.02)
A
B
1
102
56
1-1/2
114
62
2
124
67
3
4
6
165
194
229
79
101
109
D
G
K
81
M
R
R1
S
202
51
102
12.7
224
224
73
119
15.7 and 15.7 x 12.7
236
236
92
137
15.7 and 15.7 x 12.7
254
286
343
279
305
362
286
343
413
127
157
216
167
197
260
19.1
19.1
25.4
152
32
14.2
232
343
387
426
270
314
260
419
---
---
324
368
31.8
235
46
17.5
3.19
3.75
6.94
7.94
7.94
2
4.00
1/2
3.50
4.75
7.44
8.81
8.81
2.88
4.68
5/8 and 5/8 x 1/2
CL150
CL300
CL600
95
176
202
89
121
189
106
127
211
117
133
159
130
141
164(1)
195
222
T
U
W
ASME B16.5
RF FLANGES
mm
188
214
kg
4.3
117
---
6.4
14.2
8
243
124
10
297
147
1
4.00
2.21
1-1/2
4.50
2.46
2
4.88
2.63
4.19
5.00
8.31
9.31
9.31
3.63
5.38
5/8 and 5/8 x 1/2
3
4
6
6.50
7.62
9.00
3.10
3.99
4.29
4.62
5.25
6.25
5.12
5.56
6.44(2)
10.00
11.25
13.50
11.00
12.00
14.25
11.25
13.50
16.25
5.00
6.19
8.50
6.56
7.76
10.24
3/4
3/4
1
6.00 1.25 0.56
8
9.56
4.88
7.69
9.12
13.50
15.25
16.75
10.63
12.38
10
11.69
5.77
8.75
10.25
16.50
---
---
12.75
14.50
1-1/4
9.25 1.81 0.69
208
CL150, 300,
and 600
8.44
8.19
10
15
22
27
62
CL150
114
Inch
7.38
APPROX
WEIGHT
lbs
10
4.62
---
14
0.56
CL150, 300,
and 600
23
34
48
60
136
CL150
252
1. Multi-class valves are not interchangeable because of line bolting requirements. Please select the appropriate valve based on the pressure class of your piping.
2. 179 mm (7.06 inches) for NPS 6, CL600 valves only.
Figure 8. Fisher V200 Dimensions (also see table 10)
A
G
B
K
U
D
R∅
S∅
T
T
R1
W
NPS 1 THROUGH 2
11B2625-K
12B3060-L
B2331-2
16
M
W
NPS 3 THROUGH 10
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Table 11. Fisher V200 Flanged CL600 Dimensions
DIMENSIONS (ANSI/ISA 75.08.02)
VALVE SIZE
APPROXIMATE
WEIGHT
Flange Hole
Thread, Inch
S
Diameter
T
U
5/8-11 UNC
5/8-11 UNC
16
117
---
140 (16)
3/4-10 UNC
3/4-10 UNC
19
152
32
141
165 (16)
7/8-9 UNC
---
19
152
32
14.2
159
164
197 (24)
1-8 UNC
1-8 UNC
25
152
32
14.2
93
208
195
232
216 (24)
1-1/8-8 UNC
1-1/8-8 UNC
32
235
46
17.5
160
2.63
7.38
4.19
5.00
4.75 (16)
5/8-11 UNC
5/8-11 UNC
5/8
4.62
---
6.50
3.10
8.44
4.62
5.12
5.50 (16)
3/4-10 UNC
3/4-10 UNC
3/4
6.00
1.25
4
7.62
3.99
8.44
5.25
5.56
6.50 (16)
7/8-9 UNC
---
3/4
6.00
1.25
0.56
105
6
9.00
4.29
8.44
6.25
6.44
7.75 (24)
1-8 UNC
1-8 UNC
1
6.00
1.25
0.56
205
8
9.56
4.88
8.19
7.69
9.12
8.50 (24)
1-1/8-8 UNC
1-1/8-8 UNC
1-1/4
9.25
1.81
0.69
353
A
B
D
G
K
M (Qty)
Bolt Size
50
124
67
188
106
127
121 (16)
80
165
79
214
117
130
100
194
101
214
133
150
229
109
214
200
243
124
2
4.88
3
DN
W
mm
NPS
kg
17
14.2
28
48
Inch
lbs
38
0.56
61
Figure 9. Fisher V200 CL600 Flanged Dimensions (also see table 11)
MATCHES CL600 RF FLANGES
U
S∅
T
W∅
W∅
NPS 2
G
M
B2330-3
B
K
D
T
NPS
3 THROUGH 8
M
A
17
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Table 12. Fisher V300 Dimensions
V300 DIMENSIONS (ISA S75.08.02)
VALVE
SIZE,
APPROXIMATE
WEIGHT
G
K
M(3)
188
81
89
106
95
121
127
100
114
106
94
108
100
13
16 and 16 X 13
16 and 16 X 13
117
79
101
109
214
117
133
159
130
141
164
133
140
152
121
127
140
19
19
25
152
32
243
297
338
124
147
174
208
195
222
268
232
260
303
165
186
198
152
173
186
32
32
38
235
46
17.5
103
200
293
381
406
508
206
229
235
356
295
330
406
343
365
457
152
152
224
133
133
203
44.5
54.0
63.5
273
273
337
50.8
50.8
76.2
19.1
19.1
22.4
375
511
755
1
1-1/2
2
4.00
4.50
4.88
2.21
2.46
2.63
7.38
3.19
3.50
4.19
3.75
4.75
5.00
3.94
4.50
4.19
3.69
4.25
3.94
1/2
5/8 and 5/8 X 1/2
5/8 and 5/8 X 1/2
4.62
---
3
4
6
6.50
7.62
9.00
3.10
3.99
4.29
8.44
4.62
5.25
6.25
5.12
5.56
6.44
5.25
5.50
6.00
4.75
5.00
5.50
3/4
3/4
1
6.00
1.25
8
10
12
9.56
11.69
13.31
4.88
5.77
6.87
8.19
7.69
8.75
10.56
9.12
10.25
11.94
6.50
7.31
7.81
6.00
6.81
7.31
1-1/4
1-1/4
1-1/2
9.25
1.81
0.69
226
440
645
14(2)
16(2)
20
15.00
16.00
20.00
8.12
9.00
9.25
14.00
14.00
14.00
11.62
13.31
16.00
13.50
14.38
18.00
7.75
8.25
8.81
7.00
7.50
8.00
1-3/4
2-1/8
2-1/2
10.75
10.75
13.25
2.00
2.00
3.00
0.75
0.75
0.88
825
1125
1661
B
25
40
50
102
114
124
56
62
67
80
100
150
165
194
229
200
250
300
350(2)
400(2)
500
N(3)
S
Diameter
D
A
DN(1)
T
U
W
mm
NPS
kg
8
12
17
--14.2
28
37
60
Inch
lbs
17
27
38
0.56
61
81
133
1. DN25, 40, 50, 80, and 100 are the only sizes offered in V300 for Europe.
2. DN 350 and 400 (NPS 14 and 16) valves are available in ASME B16.10 short, only. See dimension A for ASME B16.10 short shown in figure 11.
3. Clearance necessary to remove flange bolts.
Figure 10. Fisher V300 Dimensions (also see table 12)
MATCHES CL300 RF
OR PN 25, 40 FLANGES
U
S∅
T
W∅
N
B2330-3
18
B
A
M
G
K
D
DN 25
THROUGH 80
(NPS 1
THROUGH 2)
T
W∅
DN 80
THROUGH 500
(NPS 3
THROUGH 20)
Product Bulletin
Vee-Ball Valves
51.3:Vee-Ball
August 2017
D101363X012
Table 13. Fisher V150 Optional Dimensions
Table 14. Fisher V200 Optional Dimensions
V200 OPTIONAL DIMENSIONS (ASME B16.10 SHORT)(1,2)
V150 OPTIONAL DIMENSIONS FOR NPS 1 THROUGH 12
(ASME B16.10 SHORT)
VALVE SIZE
M(1)
A
VALVE SIZE, NPS
A
N
M
mm
DN
NPS
mm
Inches
mm
Inches
mm
Inches
25
40
50
80
100
150
200
250
300
1
1-1/2
2
3
4
6
8
10
12
127
165
178
203
229
267
292
330
356
5.00
6.50
7.00
8.00
9.00
10.50
11.50
13.00
14.00
103
135
155
142
155
163
182
176
170
4.06
5.31
6.11
5.61
6.11
6.40
7.15
6.94
6.69
71
78
92
98
98
112
124
132
132
2.81
3.06
3.61
3.86
3.86
4.40
4.90
5.19
5.19
1
1-1/2
2
3
4
6
8
10
127
165
178
203
229
267
292
330
1
1-1/2
2
3
4
6
8
10
5.00
6.50
7.00
8.00
9.00
10.50
11.50
13.00
202
240
268
286
321
381
394
451
Inch
1. NPS 1 constructions have threaded inlet flange holes.
7.94
9.44
10.56
11.25
12.62
15.00
15.50
17.75
1. Available for CL150 valves only.
2. ASME B16.10 short dimensions are actually longer than ISA S75.08.02 dimensions.
Figure 11. Fisher V150 and V200 Optional Dimensions (also see tables 13 and 14)
N
14B6907
M
N
A
A
A
ASME B16.10 SHORT
NPS 14 AND 16 V150
M
11B2625-D
B2424-1
ASME B16.10 SHORT
NPS 1 THROUGH 12 V150
12B3060-B
A6530
M
ASME B16.10 SHORT
V200
Notes:
S NPS 1 through 12 valves are available with either ISA S75.08.02 face-to-face dimensions or ASME B16.10 short face-to-face dimensions. NPS 1 through 12 valves will be
supplied in ISA S75.08.02 unless you specify otherwise. Note that ASME B16.10 short dimensions are actually longer than ISA S75.08.02.
S NPS 14 and 16 valves are available only with ASME B16.10 short face-to-face dimensions.
S NPS 20 valves are available only with a 508 mm (20-inch) face-to-face dimension.
S M and N dimensions shown for V150 are clearance necessary to remove flange bolts.
19
Product Bulletin
51.3:Vee-Ball
August 2017
Vee-Ball Valves
D101363X012
Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.
Fisher, Vee-Ball, FIELDVUE, and ENVIRO-SEAL are marks owned by one of the companies in the Emerson Automation Solutions business unit of Emerson
Electric Co. Emerson Automation Solutions, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are
the property of their respective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
Emerson Automation Solutions
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Cernay, 68700 France
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
E
201990, 2017 Fisher Controls International LLC. All rights reserved.