SoloComb - SoloGroom

SOLOCOMB
Tips for Maintaining
your SoloComb
Before use, always check that the screws are secure and tighten if necessary.
Many small cuts produce the best results and avoid damage to the precision
engineered blades. DO NOT OVERLOAD THE COMB WITH HAIR.
Remove the comb head and clean blades after each use. A toothbrush is ideal.
If the blades are not cutting properly check that the screws are secure and
have not worked their way loose during use. This could cause hair to become
trapped in between the blades, giving the impression that the blades are blunt.
Remove the blade cover and blades and clean away any hair that has become
trapped. Refit the blades and blade cover ensuring that the screws are firmly
and securely tightened (see full instructions below).
To clean or fit replacement blades:
1. Release comb head lock.
2. Slide head away from body.
3. When the comb head has been carefully removed, brush off any dirt or
trapped hair from the blades.
4. The blades should be wiped with a damp cloth, or preferably a small
brush (e.g. toothbrush), after each use.
To replace blades follow steps 1 and 2 above and then remove the fixing
screws, blade cover and fixing plate. On re-assembling the SoloComb ensure
that the screws are fully tightened.
NB Do not open the main casing as this will invalidate the warranty.
WD40 may be used very infrequently and very sparingly to ensure good lubrication.
NEVER use clipper blade oil.
VIEW OUR VIDEO DEMONSTRATION ON
HOW TO USE YOUR SOLOCOMB
at: www.sologroom.com
Download PDF
Similar pages
GBC CombBind C250Pro
13"
GBC Comb Binder Electric C800 Pro
GBC C800Pro
gbc combbind c210 binding machine
GBC CombBind C210
Compucase Flex ATX
Compucase HEC-120SA-7FX