LED Sconce Star
Outdoor application with minimal ambient light
Dimmable!
Indoor application with soft ambient light
Description
Completely self-contained die cast aluminum wall mount fixture of only 10.4 watts with replaceable 120VDC LED Modules
included. Dimmable. Energy savings of 72% vs. Xenon/Halogen technology. 120VAC input and output of up to 75 fixtures per
15A tap. Two light sources per fixture (up and down lighting), each with two different sized openings. Unplugging one module
allows one light source option. Offered in four fixture finish colors.
Applications
4Hallways
4Stairs
4Entryways
4Doorways
4Garages
4Porches
4Walkways
Features
• Replaceable 120VDC
LED Modules
• Pleasingly warm color
temperature of 3100K
• Removal of one
module does not affect
illumination of
remaining module
• Energy usage of 10.4 watts per fixture
(5.2 watts per Module)
• Maximum of 75 fixtures
per 120VAC, 15A circuit
• Dimmable
4Lobbies
4Columns
4Directional
Accents
4Architectural
Accents
20
• Mounts to a standard
4” x 4” junction box
• Uses standard
household RomexTM
wire input/output
• Powder coated die cast
aluminum construction
• 4 color options:
White, Bronze, Aluminum, Black
Suitable for
• Wet Location
National Specialty Lighting 2014 - 2015
LED Sconce Star
Dimmable!
Specifications
Dimming
Agency Approval
Warranty
120VAC
Both modules 120VAC, 95mA, 10.4 watts. One module 120VAC, 50mA, 5.2 watts.
3100K +/- 200K
Replaceable 120VDC LED Module rated at 40,000 hours
Powder coated white, black, aluminum and bronze
Fixture is die cast aluminum for low fixture weight and corrosion protection.
Junction box cover is stamped steel.
Tempered glass
120VAC can be parallel wired (“daisy chained”) up to 75 fixtures maximum per circuit.
Check local code and NEC for wiring selection.
Dimmable with specified 120VAC dimmer. See instructions for details.
UL Listed and labeled wet location. Wall mount only.
Two years. See back cover for details.
accessories
fixture color options
White
ordering logic
LSS-XX-YY
Bronze
Aluminum
XX = LED COLOR
YY = FIXTURE FINISH
WW = Warm White
WH = White
BZ = Bronze
One LED Module can be Unpowered
Black
Replaceable LED Module
LEDMOD-32-FF
BK = Black
AL = Aluminum
Schematics
For applications requiring light in the up or down direction only.
43/8”
23/4”
93/8”
43/8”
Both modules powered
led products
Voltage
Fixture Energy Rating
LED Color Temperature
Average LED Module Life
Fixture Finish
Construction
Lens
Wiring Options
2 7/8”
3 1/4”
One module powered
Light Output Flexibility
Each fixture has a narrow and a wide opening on opposite fixture ends.
Fixtures are symmetrical and mounting can be accomplished with either opening pointing up or down.
Photometrics
on page 57
Narrow Opening
7/16” W x 1-5/8” H
Wide Opening
1-3/16” W x 1-5/8” H
21