PD Only Silicon Registration Form and Checklist

USB-IF: USB PD 2.0 Only Silicon Registration Form and Checklist
Version 1.2 Please complete the registration form and submit to admin@usb.org. State “N/A” to all questions not applicable to your USB product Type. Company Information Company Name Contact Name Contact Email USB Type‐C™ Product Information Product Marketing Name Product Model/Part Number Product Revision Number of USB Connectors implemented TID/manufacturer/model of the USB Connectors implemented on the product under test: 1.
2.
3.
4.
Integrators List Display Date Public Product Display Date General Questions Does your product follow all requirements defined in the USB specifications that are applicable to your product category? Have you submitted a jpg picture of your product labeling each port numerically? Does your product implement any other USB connector other than a USB Type‐C™ connector? Yes
No
Yes
No
Yes
No
USB-IF: General USB Type-C™ Registration Form and Checklist
Version 1.2 If so, name all USB connector types used. Please review section 4.8.2 of the USB Type‐C™ specification. Does your product comply with this section of the specification? Does your product implement Power Delivery? If yes, please provide the TID, manufacturer, model, and revision of the certified USB PD silicon. If yes, is your product a Provider, Consumer, Provider/Consumer, or Consumer/Provider? Is your product USB PD 3.0 capable? Does your product have multiple USB Ports? Yes
No
Yes
No
Provider
Consumer
Provider/Consumer
Consumer/Provider
Yes
No
Yes
No
Yes
No
Reference Design
End Product
Yes
No
Yes
No
Total Wattage capable of being sourced by the product under test. Total Wattage of the port with highest power output Total Wattage of Port#1 Total Wattage of Port#2 Total Wattage of Port#3 Total Wattage of Port#4 Have you submitted a Vendor Information File generated from the USB‐IF approved tool found here http://www.usb.org/developers/tools/ titled “USB Vendor File Generator”? Is the product under test under test a reference design or an end‐product? Does the product under test implement an Alternate Mode? Is the product under test capable of USB Data Communication? If yes, what is the data role? Is the product a Data Host, Data Device, or Hub? Does the product under test have an integrated Billboard Device? What is the maximum supported speed of the product? Data Host
Yes
Data Device
Data Hub
No
USB-IF: General USB Type-C™ Registration Form and Checklist
Version 1.2