HDMIE70V2
HDBase-T 70m Extender 4K HDCP 2.2, IR control & POE
User Guide
Important Safety Notice
Thank you for purchasing this Antiference HDMI distribution product.
Please read the following instructions carefully and retain for future
reference.
1. Please pay careful attention to the following safety considerations:
2. Do not place any items on the device
3. Ensure no liquids are on or near the device as splashes may damage the
unit
4. For cleaning, use a damp cloth only without solvents
5. Do not attempt to open the case as there is a danger of electric shock
6. Repairs should be carried out by a qualified technician
7. Place the unit in a well ventilated area to prevent overheating
8. Carry out the installation before connecting the device to a source of power
9. Use only the supplied power supply as 3rd party products may damage the
product
Introduction
This HDBaseT HDMI extender sends 1080@60 resolution signals up to
70meters over a single CAT6 cable and 4K2K@30/60 (2160) resolutions up
to 40m with HDCP 2.2 support. It also supports 3D, 24bits deep colour, & bidirectional IR control + POE.
Features
1.
2.
3.
4.
5.
6.
HDBaseT extender technology
Uncompressed HDMI video signal
Supports full HD 1080p@60Hz, 3D, 4Kx2K with HDCP2.2
Extend 1080p signal over CAT6 up to 70 meters
Supports bi-directional IR control
Supports uncompressed LPCM audio and compressed DTS-HD, Dolby True
HD
7. POE support - includes 12v PSU which can be located at transmitter or
receiver unit.
Package contents
Installation Requirement
1. HDMI source device such as SKY Q or HD, Blu Ray player, Apple TV CCTV
etc
2. HDMI display device with HDMI input port – HDTV, monitor or projector
3. UTP/STP Cat5e/6/6A/7 cable, following the standard of IEEE-568B.
Product Description
1 HDMI to HDBaseT TX Sender
1.
2.
3.
4.
5.
HDMI signal input from source device
IR signal input to connect with IR receiver sensor cable.
IR signal output to connect with IR transmitter sensor cable.
12V DC power input
HDBaseT signal output (RJ45 port)
2 HDBaseT to HDMI RX Receiver
1.
2.
3.
4.
5.
12V DC power input
HDBaseT signal input (RJ45 port)
HDMI signal output to connect with HDMI display device.
IR signal input to connect with IR receiver sensor cable.
IR signal output to connect with IR transmitter cable.
3 LED Indicators
1. Power on indicator
2. Flashes when connecting and lit solid when signal is being received.
3. HDMI output indicator lit solid when content is outputting.
Installation Procedure
1 To make a Cat5e/6 network cable Follow the standard of IEEE-568B
1.
2.
3.
4.
5.
6.
7.
8.
White and orange
Orange
White and green
Blue
White and blue
Green
White and brown
Brown
2 Connections
3 Bi-directional IR Control
1. This extender supports bi-directional IR control. This means the source
device may be controlled from the remote location and the EDU (TV or
display) may be controlled from the source end.
2. If control is required at the receiver end, please connect IR transmitter
sensor cable to the IR OUT port on the transmitter box. Then connect
the IR receiver sensor cable to the IR IN port on the receiver box. This
configuration is reversed for control at the source end.
FAQ
Q
A
No audio/video being received?
Check the led indicator status to make sure all connections are good and
stable.
Q
A
LED “3” is flashing but no audio/video output?
Make sure the EDU (TV or display) is switched to the correct HDMI input.
Q
A
LED “2” is flashing but LED“3”is off?
Check the source and ensure content is being received. Check the HDMI
cable connected to the EDU is properly fitted. Consider changing one or
both of the HDMI cables.
Specification
Items
Specification
HDMI Signal
Compatible with HDCP, support CEC and 24bits deep colour
Resolution Supported
480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz,
720p@50/60Hz, 1080i@50/60Hz, 1080p@/60Hz, 3D, 4Kx2K@24/25/30/60Hz
Audio
LPCM, DTS-HD, Dolby True HD
Network Cable
CAT5E, CAT6, CAT6A, CAT7
Transmission
Length
CAT5E
60m - Up to 1080p@60Hz 36bpp
35m - 1080p@60Hz 48bpp, 1080p@0Hz 3D, 4Kx2K@30Hz/60Hz
CAT6
70m - Up to 1080p@60Hz 36bpp
40m - 1080p@60Hz 48bpp. 1080p@60Hz 3D, 4Kx2K@30Hz/60Hz
Infrared Back
Support 20~60kHz wide frequency devices and Bi-directional IR
transmission
Power Supply
DC12V/2A *1pcs
Power Consumption
<8W
Product Dimension
98.5(L)x66.5(W)x23(H)mm *2pcs
Enclosure Material
Metal
Weight
TX:79g RX:107g
Colour
Black