Local Repal
[] Electrolux
Solutions Hotline
(United
States)
1-800-944-9044
(Canada)
1-800-668-4606
Resolve many service issues over the
phone at your convenience!
If we can't resolve your service issue,
we'll schedule a reputable local
service technician
for you!
important
_/
Electrolux
Purchase Extended
Protection
........... 2
Installation
..........................................
3
Connecting
Water Supply
.................
4
...............
5
Door Removal
Temperature
Ice Service
Normal
Order Genuine
Accessories
Safety Instructions
Instructions
Controls
.......................
..........................................
Operating
Sounds
& Sights.
8
9
10
Parts &
Care and Cleaning
Warranty
READ AND SAVE THESE INSTRUCTIONS
Warranty
Before
.............................
.............................................
you Call ..................................
10
12
13
P/N2418s_200(Apt200z)
PROPER DISPOSAL OFYOUR REFRIGERATOR OR
FREEZER
Risk of child entrapment
FORYOUR
SAFETY
,,
Do not store or use gasoline, or other flammable liquids
in the vicinity of this or any other appliance. Read product
labels for warnings regarding flammability and other
hazards.
,,
Do not operate the refrigerator in the presense of
explosive fumes.
,,
Avoid contact with any moving parts of automatic
maker.
,,
Remove all staples from the carton. Staples can cause
severe cuts, and also destroy finishes if they come in
contact with other appliances or furniture.
ice
CHILD SAFETY
Destroy or recycle the carton, plastic bags, and any exterior
wrapping material immediately after the refrigerator is
unpacked. Children should NEVER use these items to play.
Cartons covered with rugs, bedspreads, plastic sheets or
stretch wrap may become airtight chambers, and can quickly
cause suffocation.
Child entrapment and
suffocation are not problems of
the past. Junked or abondoned
refrigerators or freezers are still
dangerous - even if they will sit
for "just a few days." If you are
getting rid of your old refrigerator
or freezer, please follow the
instructions below to help
prevent accidents.
Before you throw away your
,,
Remove doors.
old refrigerator/freezer:
,,
Leave shelves in place so children may not easily climb
inside.
,,
Have refrigerant
technician.
removed by a qualified service
iiiiiiii
_oyc_,oor.st_.oos
iiiiiiiiiiiiiii
cut, remove,
orbypassthe
iiiiiiiiiiiiiii
!i!i!i!i!iiiiii
iiiiiiii
iiiiiiii
ELECTRICAL
iNFORMATiON
3-prong
,
,,
,,
,,
,,
,,
,,
The refrigerator must be plugged into its own dedicated
115 Volt, 60 Bz., AC only electric outlet. The power cord
of the appliance is equipped with a three-prong grounding
plug for your protection against electrical shock hazards. It
must be plugged directly into a properly grounded threeprong receptacle. The receptacle must be installed in
accordance with Iocalcodes and ordinances. Consult a
qualified electrician. Do not use an extension cord or
adapter plug.
If the power cord is damaged, it should be replaced by the
manufacturer, service technician or a qualified person to
prevent any risk.
Never unplug the refrigerator by pulling on the power
cord. Always grip the plug firmly, and pull straight out
from the receptacle to prevent damaging the power cord.
Unplug the refrigerator before cleaning and before
replacing a light bulb to avoid electrical shock.
Performance may be affected if the voltage varies by 10%
or more. Operating the refrigerator with insufficient power
can damage the compressor. Such damage is not covered
under your warranty.
Do not plug the unit into an outlet controlled by a wall
switch or pull cord to prevent the refrigerator from being
turned off accidentally.
Avoid connecting refrigerator to a Ground Fault Interrupter
(GFI) circuit.
grounded
plug
,
This Use & Care Manual provides specific operating
instructions for your model. Use the refrigerator only as
instructed in this Use & Care Manual. Before starting the
refrigerator, follow these important first steps.
LOCATION
,
,
DOOR OPENING
Your refrigerator should be positioned to allow easy access to
a counter when removing food. To make this possible, the
direction in which the doors open can be reversed. See Door
Removal & Reversal Instructions.
Choose a place that is near a grounded electrical outlet.
Do Not use an extension cord or an adapter plug.
If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
SOUrCes.
,,
The refrigerator must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
,,
Consider water supply availability
with an automatic ice maker.
for models equipped
iNSTALLATiON
LEVELING
All four corners of your refrigerator must rest firmly on a solid
floor. Your refrigerator is equipped with adjustable front rollers
or front leveling screws to help level your unit.
To LevelYour
Refrigerator:
1. Remove toe grille.
2.
Use flat-blade
or 3/8" socket wrench to
adjust front rollers. Use
adjustable wrench to
adjust leveling screws.
Raise
©
installation
o
Clearances
Raise
Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides & Top
Back
3/8"
1"
Adjustable Front Roller
(some models)
Stationary Front Roller
with Leveling Screw
(some models)
To Connect
1.
2.
3.
4.
5.
6.
7.
8.
Water
Supply
LineTo
ice Maker Inlet Valve
Disconnect refrigerator from electric power source.
Place end of water supply line into sink or bucket. Turn ON
water supply and flush supply line until water is clear. Turn
OFF water supply at shutoff valve.
Unscrew plastic cap from water valve inlet and discard
cap.
Slide brass compression nut, then ferrule (sleeve) onto
water supply line, as shown.
Push water supply line into water valve inlet as far as it
will go (¼ inch). Slide ferrule (sleeve) into valve inlet and
finger tighten compression nut onto valve. Tighten another
half turn with a wrench; DO NOT over tighten.
With steel clamp and screw, secure water supply line to
rear panel of refrigerator as shown.
Coil excess water supply line (about 2Y2 turns) behind
refrigerator as shown and arrange coils so they do not
vibrate or wear against any other surface.
Turn ON water supply at shutoff valve and tighten any
connections that leak.
9. Reconnect refrigerator to electrical power source.
10. To turn ice maker on, lower wire signal arm (see ice
maker front cover for ON/OFF position of arm).
Before
Installing
The Water
Supply
Line, You Will Need
,,
Basic Tools: adjustable wrench, flat-blade screwdriver,
and Phillips TM screwdriver
,,
Access to a household cold water line with water pressure
between 30 and 100 psi.
A water supply line made of ¼ inch (6.4 mm) OD, copper
tubing. To determine the length of copper tubing needed,
you will need to measure the distance from the ice maker
inlet valve at the back of the refrigerator to your cold water
pipe. Then add approximately 7 feet (2.1 meters), so the
refrigerator can be moved out for cleaning (as shown).
A shutoff valve to connect the water supply line to your
household water system. DO NOT use a self-piercing type
shutoff valve.
,
,,
,,
A compression nut and ferrule (sleeve) for connecting the
water supply line to the ice maker inlet valve.
Copper water line
from household
water supply
(Include enough tubing in loop to allow
g refrigerator out for cleaning.)
Door Stop
2%
Scr
Tools Necessary:
Handle
Awl
Boom
Center
Hinge
ge
Screw
Scre_
Phillips rMhead
Quadrex"
head
Socket
Wrench Set
screwdriver
AdiustabEe
Wrench
DOOR REMOVAL AND REVERSAL INSTRUCTIONS:
Top Hinge
3vet
Top Hinge
1.
Remove toe grille.
2.
Remove top hinge cover. Trace around the hinge with a soft lead pencil.
This makes reinstallation easier. Remove top hinge and lift door off center
hinge pin. Set door aside.
Unscrew center hinge pin using adjustable wrench and save for
reassembly. Ensure plastic washer stays on hinge pin.
Lift refrigerator door off of bottom hinge and set aside.
Remove center hinge and shim by removing inside screw and
loosening two outside screws enough to allow hinge and shim to slide out.
Tighten screws.
Loosen two outside screws on opposite side of refrigerator, remove inside
screw and install center hinge.
Remove two screws on bottom hinge with 3/8" socket wrench.
3.
4.
5.
6.
7.
8.
Install bottom hinge on opposite side with the two screws removed from
step 7.
9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin to
other hole in hinge and tighten with adjustable wrench.
10. Reverse door handles (see instructions on next page).
Door
Stop
Doer
11. Move freezer and refrigerator door stops to opposite side. Before starting
screws, use an awl to puncture the foam.
12. Position refrigerator door onto bottom hinge pin and screw center hinge pin
through center hinge into top of door. Close refrigerator door to help align
hinge hole.
13. Tighten center hinge pin with adjustable wrench.
14. Remove cabinet and hinge hole plugs and move to opposite side.
15. Lower freezer door onto center hinge pin.
16. Close freezer door. Have an assistant lift up on opposite side of door while
tightening screws to install top hinge.
17. Replace toe grille.
18. Plug in electrical power cord and turn refrigerator temperature control to
center position. Adjust setting as necessary.
4.
Self-Adhesive
Nameplate Models: Use putty knife to
gently peel off nameplate from door and reapply over old
handle holes.
TO ATTACH FREEZER HANDLE:
1.
TO REMOVE
FREEZER
HANDLE:
(Handles may be easier to reverse wMe doors are off.,
1.
Remove two screws attaching qandle to bottom of freezer
door.
2.
Remove short trim piece by sliding tnm straight up and off
of handle bracket,
3.
4.
Remove screw attaching top of handle to door
Self-Adhesive Nameplate Models: Gently peel off
nameplate from door and reapply over old handle holes.
TO ATTACH
HANDLE:
1.
2.
3.
2.
FREEZER
Start with handle
offset away from
door. Place top of
handle over dovetail
button, swing
handle into an
upright position and
pull downward,
locking it into place.
Secure bottom of
handle with two
screws removed
earlier.
Self Adhesive
(sNram
emPlate_s)
/Nameplate
sirei
Nam_
- ::: '_J
Reinstall handle on
opposite side, using
same hole as
nameplate.
Attach handle to
bottom of door.
_
Sc rew-.L...*_
TRIM
Button
MODELS ONLY)
In some models, the refrigerator door has a full length trim
piece which continues from the bottom of the handle to the
bottom of the door. The top of the trim attaches to the handle
bracket (Figure 1) or fits around the base of the handle (Figure
2). An adhesive "trim lock" is positioned about halfway down.
The bottom of the trim is held in place by either an adhesive
trim lock, or a trim lock with two prongs inserted into a hole on
the face of the door.
Slide trim piece
straight down onto
handle bracket.
Self Adhesive
Nameola[e
some
(FULL-LENGTHTRIM
REMOVAL
over
Dovetail
models.
TO REMOVETRIM:
TO REMOVE FREEZER HANDLE:
(Handles may be easier to reverse while doors are off.)
1.
Remove two screws attaching handle to bottom of freezer
door.
2.
3.
Remove button plug using edge of putty knife.
Remove screw on side of freezer door and remove
handle.
TO ATTACH
2.
Remove trim by gently pulling trim lock areas out and
away from door.
When trim is free from door, slide the trim straight down
and away from base of handle.
. Screw
TO REMOVE REFRIGERATOR HANDLE:
(Handles may be easier to reverse while doors are off.)
handle to door and
replace button
plug.
2. Secure handle to
bottom of door ....
Button/
Plug
_
,_
--Hand
e
i:L "
,!
i
Screw-----
.
TO REMOVE FREEZER HANDLE:
Figure
Remove two screws attaching handle to bottom of freezer
door.
2.
Swing bottom of handle away from the door and slide
handle straight up and off of dovetail button.
Remove screw and dovetail button and install on other
side, using the same holes as nameplate.
3.
Handles
Remove two screws attaching handle to top of refrigerator
door.
2.
3.
Remove screw attaching bottom of handle to door.
Remove two hole plugs and hinge pin plug on top of door
and install on opposite side. Use Phillips head screwdriver
to remove plastic screw plug from front of door and install
on opposite side
(Handles may be easier to reverse while doors are off.)
1.
1 Style
1.
Figure
2 Style
Handles
1.
Remove two screws attaching handle to top of refrigerator
door.
2.
Swing top of handle away from door and slide handle
down and off of dovetail button.
3.
Remove screw and dovetail button and install on other
side, moving hole plugs from corresponding holes to
opposite side.
Lock Handle
Over
Dovetail
TO ATTACH REFRIGERATOR HANDLE:
Figure
1 Style
Handles
1.
Secure bottom of handle with screws.
2.
Secure top of handle with screws.
Figure
1.
2.
2 Style
Handles
Start with handle offset away from door. Place bottom of
handle over dovetail button, swing handle into an upright
position and pull upward, locking it into place.
Secure top of handle with screws.
TO ATTACHTRIM:
1.
Slide both trim locks out of trim.
2.
Insert new adhesive trim locks contained in your literature
pack.
Install trim to handle by sliding under base of handle.
Carefully align trim and press clown at trim lock locations.
Use rubbing alcohol to remove any adhesive residue from
old trim lock locations.
3.
4.
Figure 1
Figure 2
REMOVING STAINLESS STEEL DOORS AND HANDLES
TO REMOVE REFRIGERATOR HANDLE:
(Handles may be easier to
reverse while doors are off.)
1. Remove two screws
attaching handle to top of
refrigerator door.
2.
Remove button plug
using edge of putty knife.
3.
Remove screw on side of
4.
To Remove Doors
_.
Stainless steel doors are not reversible.
remove doors.
1.
2.
3.
refrigerator door and
remove handle.
Reverse freezer and
refrigerator handles as
shown in figure 3.
4.
Figure 3 - Handle Reversal
Remove center hinge
and shim by removing
inside screw and
loosening two outside
screws enough to allow
hinge to slide out.
6.
Remove bottom hinge.
Reinsert two outside
REFRIGERATOR
HANDLE:
1. Secure side of handle to
door and replace plug
button.
2.
Handle
Secure handle to top of
door.
screws in holes and
tighten.
Buttofl"
7.
Plu
Refrigerator
a
Remove toe grille and top hinge cover.
Remove top hinge and lift freezer door off of center hinge
pin. Set door aside.
Unscrew center hinge bin using adjustable wrench and
save for reassembly. Ensure plastic washer stays on
hinge pin.
Lift refrigerator door off of bottom hinge and set aside.
5.
TO ATTACH
Door Without Trim
Follow these steps to
Shoulder
Shoulder-
Set
Screw
Screw
Reverse steps 1 - 6to
reinstall doors
To Remove
Handles
1.
Firmly hold freezer handle while loosening set screws
with 3/32" allen wrench. Remove freezer handle.
2.
Repeat step 1 for refrigerator door.
COOL DOWN PERIOD
TEMPERATURE
To ensure safe food storage, allow the refrigerator to operate
with the doors closed for at least 8 to 12 hours before loading
it with food.
,
Adjust temperature gradually: move the knob in small
increments, allowing the temperature to stabilize.
,
For colder temperatures, turn the knob towards Colder.
REFRIGERATOR & FREEZER CONTROLS
ADJUSTMENT
For warmer temperatures,
turn the knob towards Cold.
Turning the refrigerator control will change temperatures in
both compartments. For example, if the refrigerator control is
turned to a colder setting, the freezer control may have to be
adjusted to a warmer setting. Turning the freezer control will
change only the freezer temperature.
To maintain temperatures, a fan circulates air in the
refrigerator and freezer compartments. For good circulation,
do not block cold air vents with food items.
Freezer Control (some models)
CO d O
_
OR
colder
OR
Refrigerator & Freezer Control (some models)
Refrigerator Control
(some models)
TEMPERATURE
ADJUSTMENT
GUIDE
If Refrigerator
compartment
Is Too Warm
Turn Refrigerator
Control Slightly Towards Colder.
if Refrigerator
compartment
Is Too Cold
Turn Refrigerator
Control Slightly Towards Cold.
if Freezer compartment
Is Too Warm
Turn Freezer Control Slightly Towards Colder.
if Freezer compartment
Is Too Cold
Turn Freezer Control Slightly Towards Cold.
* To Turn Refrigerator
Off
Turn Refrigerator
Control To 0.
If your refrigerator has an automatic ice maker, it will provide a
sufficient supply of ice for normal use. During the initial startup
of your refrigerator, no ice will be produced during the first 24
hours of operation. Air in new plumbing lines may cause the
ice maker to cycle two or three times before making a full tray
of ice. With no usage, it will take approximately one to two days
to fill the ice container.
New plumbing connections may cause the first production of
ice cubes to be discolored or have an odd flavor. Discard ice
made during the first 24 hours.
iCE PRODUCTION:WHATTO
EXPECT
The ice maker will produce 2.5 to 3 pounds of ice every 24
hours depending on usage conditions. Ice is produced at a
rate of 8 cubes every 80 to 160 minutes.
TURNINGYOUR iCE MAKER ON
After the plumbing connections have been completed, the
water supply valve must be opened. Place the ice container
under the ice maker, pushing it as far back as possible. Lower
the wire signal arm to its "down" or ON position.
TURNINGYOUR
ICE MAKER OFF
To stop the ice maker, lift the
wire signal arm until it clicks and
locks in the "up" or OFF position.
The ice maker also turns off
automatically when the ice
container is full. If your model
has an adjustable freezer shelf,
place the shelf in the lower
position, so that the wire signal
arm will hit the ice when the
container is full.
Signal Arm
UNDERSTANDINGTHE
SOUNDSYOU
MAY HEAR
when turning the refrigerator on and off. The timer also
produces sounds similar to an electric clock.
Your new high-efficiency refrigerator may make unfamiliar
sounds. These are all normal sounds and soon will become
familiar to you. They also indicate your refrigerator is operating
as designed. Hard surfaces, such as vinyl or wood floors,
walls, and kitchen cabinets may make sounds more
noticeable. Listed below are descriptions of some of the most
common sounds you may hear, and what is causing them.
F. CondenserFan
If condenser coils are located underneath your
refrigerator as shown in the drawing at the left, you
have a condenser fan. You may hear air being forced
through the condenser by the condenser fan.
G. Compressor
Modern, high-efficiency compressors operate much
faster than older models. The compressor may have a
high-pitched hum or pulsating sound.
14. Water Valve
If your refrigerator is equipped with an automatic ice
maker, you will hear a buzzing sound as the water valve
opens to fill the ice maker during each cycle.
I. Drain Pan (Nonremovable)
You may hear water running into the drain pan during
the defrost cycle. The drain pan will be located on top
of the compressor for air-cooled condensers (black coils
on back of refrigerator).
J. Condenser
Coils
REPLAClNGTHE
MODELS)
1.
2.
3.
4.
A. Evaporator
The flow of refrigerant through the evaporator may
create a boiling or gurgling sound.
B. Evaporator
Fan
You may hear air being forced through the refrigerator
by the evaporator fan.
C. Defrost
Heater
D. Automatic
5.
6.
Remember to plug the refrigerator back in.
CLEAN
CONDENSER
condenser, there's
no need to clean the
condenser under
normal operating
conditions. If the
refrigerator is
operated under
particularly dusty or
greasy conditions, or
If your refrigerator is equipped with an automatic ice
maker, you will hear ice cubes falling into the ice bin.
only)
FREEZER LIGHT BULB (SOME
If your refrigerator is
equipped with a
Never Clean
Ice Maker
models
Unplug refrigerator.
Wear gloves as protection against possible broken glass.
Unsnap light shield as shown.
Unscrew and replace old bulb with an appliance bulb of
the same wattage.
Replace light shield.
NEVER
During defrost cycles, water dripping onto the defrost
heater may cause a hissing or sizzling sound. After
defrosting, a popping sound may occur.
(Fan-cooled
(SOME MODELS)
Defrost
WaterPan_
J
if there is significant
Defrost Water Pan (some models)
pet traffic in your
home, it may be necessary to periodically clean the condenser
for maximum efficiency.
E. Cold Control & Defrost Timer or Automatic
Defrost Control
These parts can produce a snapping or clicking sound
10
Keep your refrigerator and freezer clean to prevent odor build-up. Wipe up any spills immediately and clean both sections at
least twice a year. Never use any type of scouring pads, brushes, abrasive cleaners or strong alkaline solutions on any surface.
Do not wash any removable parts in a dishwasher. Always unplug the electrical power cord from the wall outlet before
cleaning.
Care & Cleaning
Part
Chart
What To Use
Tips and Precautions
Interior/Door
Liner
•
•
Soap and water
Baking soda and water
Use 2 tablespoons of baking soda in 1 quart of warm water. Be sure to wring
excess water out of sponge or cloth before cleaning
around controls,
light bulb or any electrical part.
Door Gaskets
•
Soap and water
Wipe gaskets
Drawers/Bins
•
Soap and water
Do not wash any removable
Glass
•
•
•
Soap and water
Glass cleaner
Mild liquid sprays
Allow glass to warm to room temperature
•
•
•
Soap and water
Mild liquid sprays
Vacuum attachment
Vacuum dust from front of toe grille. Remove toe grille
wipe with sudsy cloth or sponge. Rinse and dry.
Vacuum
and
•
Soap and water
Do not use commercial
handles.
or alcohol to clean
Exterior and
Handles
•
•
•
Soap and water
Ammonia
Stainless Steel Cleaners
•
•
Condenser Cleaning
Brush is available from
your dealer.
Vacuum Cleaner
•
Vacuum
•
Soap and water
•
•
Soap and water
Mild liquid sprays
Shelves
Toe Grille
Exterior
Handles
(Stainless
Steel
Models Only)
Condenser
Coils
(Fan-cooled
models only)
Condenser
Coils
Cleaner
(Air-cooled
models only)
Defrost
Water
Pan
Exterior
(Easy
Care
Stainless
Models)
Steel
CAUTION:
with a clean soft cloth.
Never
items (bins, drawers,
household
before
cleaners,
use CHLORIDE
etc.) in dishwasher.
immersing
ammonia,
to clean
stainless
in warm water.
backside
and
steel.
Clean stainless steel front and handles with non-abrasive
soapy water and a
dishcloth. Rinse with clean water and a soft cloth. Wipe stubborn spots with an
ammonia-soaked
paper towel, and rinse. Use a non-abrasive
stainless steel
cleaner. These cleaners can be purchased at most home improvement
or
major department stores. Always follow manufacturer's
instructions.
NOTE: Always clean, wipe and dry with the grain to prevent cross-grain
scratching. Wash the rest of the cabinet with warm water and mild liquid
detergent. Rinse well, and wipe dry with a clean soft cloth.
No need to clean unless operating refrigerator under particularly dusty or
greasy conditions,
or if there is significant pet traffic in your home. If cleaning
is necessary, remove toe grille and use extended vacuum attachment and
condenser cleaning brush to remove dust build-up from condenser coils (see
item "J" in "NORNAL OPERATING
SOUNDS & SIGHTS").
Use the dusting tool attachment on your vacuum to remove dust build-up on
the condenser coils (black tubes and wires) attached to the back of air-cooled
refrigerators only.
Some models have defrost water pan located on top of compressor at bottom
rear of refrigerator (see illustration on next page). Wipe water pan with damp
cloth. NOTE: The defrost water pan is NOT removable.
CAUTION:
DO NOT use abrasive
or stainless steel cleaners on Easy
Care Stainless
Steel Models. It will remove the protective finish.
Use warm soapy water to clean Easy Care surfaces.
be used on stubborn spots.
11
Mild liquid sprays
may
Your appliance is covered by a one year limited warranty. For one year from your original date of
purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to
be defective in materials or workmanship when such appliance is installed, used and maintained in
accordance with the provided instructions.
Exclusions
This warranty
does not cover
with original
the following:
1.
Products
serial numbers
2.
Product that has been transferred
Canada.
3.
Rust on the interior
4.
Products
5.
Food loss due to any refrigerator
or exterior
purchased
"as-is"
that
have been removed,
from its original
altered
owner to another
or cannot
party
be readily
or removed
determined.
outside
the USA or
of the unit.
are not covered
used in a commercial
by this warranty.
or freezer
failures.
6.
Products
7.
Service calls which do not involve malfunction
or defects in materials or workmanship,
or for appliances
not in ordinary household
use or used other than in accordance
with the provided instructions.
8.
Service
9.
Expenses
etc.,which
calls to correct
10. Service
knobs,
setting.
the installation
of your appliance
or to instruct
for making the appliance accessible for servicing,
are not a part of the appliance when it is shipped
calls to repair
handles,
11. Surcharges
or replace
appliance
or other cosmetic
including,
air filters,
water filters,
to, any after hour, weekend,
or mileage
12.
Damages
cabinets,
to the finish
walls, etc.
13.
Damages caused by: services performed
by unauthorized
service companies;
genuine Electrolux parts or parts obtained from persons other than authorized
causes
for service
of appliance
such as abuse,
DISCLAIMER
OF IMPLIED
SOLE AND EXCLUSIVE
INCLUDING WARRANTIES
LIMITED TO ONE YEAR OR
ELECTROLUX SHALL NOT
PROPERTY DAMAGE AND
LIMITED
WARRANTY
or home incurred
misuse,
CUSTOMER'S
REPAIR OR REPLACEMENT
calls to remote
WARRANTIES;
inadequate
LIMITATION
REMEDY
AS PROVIDED
areas,
or holiday
charges,
external
of trim, cupboards,
shelves,
other consumables,
or
parts.
but not limited
expense
light bulbs,
you how to use your appliance.
such as removal
from the factory.
during
power
including
installation,
supply,
service
calls, tolls, ferry trip
the state of Alaska.
including
accidents,
but not limited
to floors,
use of parts other than
service companies;
or
fires, or acts of God.
OF REMEDIES
UNDER THIS
HEREIN. CLAIMS
LIMITED
BASED
WARRANTY
SHALL
BE PRODUCT
ON IMPLIED WARRANTIES,
OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR
PURPOSE, ARE
THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR.
BE LIABLE FOR CONSEQUENTIAL
OR INCIDENTAL DAMAGES SUCH AS
INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN
OR ANY IMPLIED
WARRANTY.
SOME STATES AND PROVINCES
DO NOT ALLOW
THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, OR LIMITATIONS ON THE
DURATION OF IMPLIED WARRANTIES,
SO THESE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO
YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER
RIGHTS THAT VARY FROM STATE TO STATE.
mfYou Need
Service
Keep your receipt, delivery slip, or some other appropriate
payment record to establish the warranty period
should service be required. If service is performed,
it is in your best interest to obtain and keep all receipts.
Service under this warranty must be obtained by contacting
Electrolux at the addresses or phone
numbers below.
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted
by Electrolux Major Appliances
North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted
by Electrolux Canada
Corp. Electrolux authorizes no person to change or add to any obligations
under this warranty. Obligations
for service
parts under this warranty must be performed
by Electrolux or an authorized
service company. Product features or
specifications
as described
or illustrated
are subject
to change
without
notice.
USA
1.800.944.9044
Electrolux Major Appliances
North America
RO. Box 212378
Augusta, GA 30907
and
Canada
1.800.668.4606
Electrolux
12
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
L5V 3E4
1=800=944=9044
1-800=668-4606
(United States)
Visit our web site at
(Canada)
Common
Occurrences
www.frigidaire.com.
Before calling for service, review this list. It may save you time and expense. This
list includes common occurrences that are not the result of defective workmanship
or materials in this appliance.
Refrigerator does not run.
•
•
•
•
Freezer temperature too cold.
Refrigerator temperature is
satisfactory.
°
Refrigerator temperature too cold.
Freezer temperature is satisfactory,
Refrigerator is noisy or vibrates.
Odors in refrigerator.
Cabinet light not working.
Automatic ice maker not working.
(some models)
Ensure plug is tightly pushed into electrical outlet.
Check/replace fuse with a 15 amp time-delay fuse. Reset circuit breaker.
The temperature control is turned to "O".
Refrigerator may be in defrost cycle. Wait 20 minutes and check again.
Set freezer control to a warmer setting until freezer temperature is satisfactory.
Allow 24 hours for the temperature to stabilize.
,
Set refrigerator control to a warmer setting. Allow 24 hours for temperature
stabilize. Then check freezer temperatures and adjust as needed.
•
The cabinet is not level.
°
,
Floor is weak.
See Normal Operating
,
,
Interior needs to be cleaned.
Foods that produce odors should be covered or wrapped.
°
•
°
Replace light bulb.
Ensure plug is tightly pushed into electrical outlet.
Light switch may be stuck. Push in light switch,
control box, to release.
•
•
•
•
•
Ensure the Wire Signal Arm is not in UP position.
Ice maker should produce 2.5 to 3 pounds of ice in a 24 hour period.
Water supply is turned off.
Water pressure is too low.
The freezer is not cold enough.
13
Sounds
to
and Sights section.
located on the refrigerator
Download PDF

advertising