The purpose of this guide is to provide the basic
operation for this equipment. For more detailed
information, see the Operator's Manual.
Doppler Sonar
DS-60
English
All brand and product names are trademarks,
registered trademarks or service marks of their
respective holders.
Operator's Guide
How to switch screens
Long-press ENT to reset.
DISP6,
DISP7
DISP
DPTH: EXT DBK
Wind
T
15.2 m/s
2.6 m/s
352 deg
DISP1
(Navigation)
(User displays,
not set)
DISP2
(Berthing H Up)
DISP3
(HDG/Speed 3 axis)
DISP4
(Trip distance, Total distance)
DISP5(Sub display unit only)
(Speed Graphic)
How to edit displays
DISP
MENU
MENU
ESC
ESC
DPTH: EXT DBK
Wind
T
Select Display.
Select screen number (1 - 7).
Select single or
split display.
ENT
ENT
Name of selected data
is displayed.
15.2 m/s
2.7 m/s
56 deg
Selected screen appears.
For single screen, select
which data to display.
ENT
Available in single display
Heading/3-axis speed
3-axis speed

2-axis speed

1-axis speed (sub disp only)

Speed meter (sub disp only)

Navigation data

Berthing (head-up) display

Berthing (north-up) display

Trip distance

Total distance run


Available in split display
1-axis speed (sub disp only)
Trip distance

Total distance run

Heading

ROT
(Select 2 of the 4 or 5 to display.)
ENT

DISP

For split display,
Select data for 2nd
select data for 1st
display (lower box).
screen (upper box).
ENT
ENT
Names of selected data
are displayed.
Selected data appears.
Navigation data display
TRKG
MODE
Tracking mode monitor
Green: ground tracking
Blue: water tracking
Position
Time
- Ground
- Water
- Auto
GPS-measured
COG
GPS-measured
SOG
Depth
(below keel)
Doppler
COG
Current
Speed,
Diretion
Drift angle
Wind
Speed,
Angle
Trip distance
Total distance
run
Message
area
Past position (marker)
Ground tracking: light green
Water tracking: light blue
Track (solid line)
Stern track: black
Ref. pos. track: green*
Own ship marker*
(current position)
3-axis speed display
DPTH: EXT DBK
15.2 m/s
Wind
2.6 m/s
T
352 deg
210010 Ship speed limit exceeded
Berthing line
Estimated position
marker
Speed vector
Name of berthing line
Transverse speed at
reference point
Longitudinal speed
Transverse speed at
stern
Display range/
Screen orientation
*Green: ground tracking
Blue: water tracking
Long press ENT to switch the berthing display.
Drift angle marker (brown)
Wind angle marker (purple)
Direction indicator
: STBD (green)
: PORT (red)
Transverse speed at stern
(Requires rate gyro or
gyrocompass. If no connection,
“--.--” appears.)
Speed mode
SOG: Ground tracking
STW: Water tracking
PUB. NO. OSE-72640-C
(1606, GREG) DS-60
Current
direction
marker
(blue)
Long press
ENT
to reset.
Current direction
marker (blue)
Direction indicator
: FWD (black)
: AFT (red)
Wind angle
marker (purple)
ROT
Source/value
Doppler
SOG(STW)
Transverse speed
at reference point
Longitudinal speed
Show position of ship in relation to pier, etc.
Tracking mode
Heading
When alarm activates,
press ALARM
ACK to
silence alarm.
Berthing display
00017233612
How to change display data unit
UNIT
DISP
First data name is highlighted in yellow.
Select the data to
change.
To change the data unit,
continue pressing this
key.
The yellow highlight
moves.
UNIT
Change the unit.
DISP
Lastly, press this
key to remove the
yellow highlight.
Press this key to
change the screen.
2