Product Specification Product Specification

PRODUCT RELEASE
Date:
August 2016
Description:
ARB Summit Bar
Application:
Ford Ranger PXII and Ford Everest
Part No. & Barcode :
3440530 - 9332018042224
Product Group:
010 Bull Bars
Fitting:
4 ½ Hours
Availability Date:
October 2016
Product Specification
The latest ARB Summit Bar for the Ford Ranger PXII has had fitting instructions
developed to allow fitment to the Ford Everest. The new bar also includes
provision for original equipment front parking sensors as standard.
Front bumper profiles, whilst similar, differ slightly between the PXII Ranger and the
Everest. Fitting instructions provide different cutting templates to suit each model. The
3440530 bar also has the four parking sensor holes across the front of the bar.
A number of accessories are available for the PXII and Everest Summit bar including:
•
Adaptive Cruise Control brackets
•
ARB Fog Lights and clear covers
•
Various Warn, Bushranger and Smittybilt winch fitment
For light colour coded bar work, or where the driver or passenger seating position may
be elevated or forward, ARB recommend fitting part # 3500700 ANTI REFELCTIVE
TAPE KIT to eliminate any glare from the headlights on the outer tubes.
Company Ident. No. 01745956
ARB Summit Bar - Ford Ranger PXII and Ford Everest
1-8
Protection & Styling Characteristics:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Summit Bar has been confirmed to fit the Ford PXII and Ford Everest (not Titanium
model due to Active Park Assist).
Registered design of styling and design components.
Durable steel construction for maximum protection.
Incorporates ARB’s renowned multi fold upswept and tapered wing design for
optimum strength and approach angle.
30mm radius on wings and centre section.
Superbly engineered, air bag compatible mounting system secures to chassis via
high tensile bolts and hardware. Additional bracing included to provide support
around an OE chassis weld.
Split pan design for maximum strength and airflow.
2 piece grill design for split pan.
Extensive protection panels on centre and either side. The centre panel includes
additional laser cut holes for additional airflow.
60.3mm outer frames and centre cross bar.
Formed cover strap.
Pressed form top pan and aluminium (powder coated satin black) winch cover
panel.
Combination style bar to suit both winch and non-winch applications.
Twin Hi-Lift jack points located below each buffer for optimum strength.
Durable two piece buffers including cover strap intersection caps.
Will accommodate Warn, Magnum, Bushranger and Smittybilt low mount model
electric winches up to 10,000lb.
Provision for Original Equipment front parking sensors. Blanking plugs supplied if no
OE parking sensors fitted.
Provision to accommodate ARB Intensity LED’s and a range of IPF lights.
Provision for optional ARB Fog Light kit part no 3500590.
Includes ARB LED Indicator and Clearance light.
Two aerial brackets located on the top of the centre fame.
Bar adds approximately 174mm to the overall length of the vehicle.
Approximate weight of the bar, chassis mounts and fitting kit is 77kg.
Zinc rich primer for additional rust resistance.
Finished in a hard wearing satin black powder coat
Company Ident. No. 01745956
ARB Summit Bar - Ford Ranger PXII and Ford Everest
2-8
Adaptive Cruise Control With Forward Collision Alert:
Adaptive Cruise Control is available on various models of both the PXII Ranger and the
Everest.
The Ford system is mounted on the driver’s side of the lower bumper assembly. The
system provides two measurement modes by combining a wide field of view at mid
range with a more concentrated long range field of view. The system can identify up to 64
objects and update their position 20 times a second.
ARB’s engineers have developed a simple relocation bracket to move the adaptive cruise
control module into the split pan of the ARB Summit Bar on the right hand side. The
original wiring loom is retained and re-routed to mount the unit.
Part
Number
Description
Barcode
3540150
ADAPTIVE CRUISE CONTROL
KIT|SUITS 3440510/3440530
9332018040503
Parking Sensors:
The 3440530 Summit Bar for the PXII and Everest includes provision for the original
equipment front parking sensors (not Everest Titanium due to additional sensors for Active
Park Assist).
Parking sensors have been mapped in their original position on a standard equipment Ford
Ranger PXII Wildtrak and Ford Everest Trend. When fitted to the ARB Summit Bar the
outer sensors are located approximately 195mm higher than the OE condition. The two
central positions are approximately 115mm higher than the OE condition. Detection height
of the sensors has increased by approximately 120mm for the outer and approximately
100mm for the inner sensors. When fitted with larger diameter tyres and / or aftermarket
suspension these parking sensor positions and hence range may also be affected.
Further real world testing has been conducted evaluating the operation of the sensors
against such items as rubbish bins, parking bollards, wire fences, large rocks and step
driveway entrances. Test results show that sensor performance is replicated as close as
practical with the change in height of the sensors location.
When fitted, the parking sensors sit proud of the face of the bar. If the vehicle is not fitted
with the OE parking sensors blanking plugs are included.
Company Ident. No. 01745956
ARB Summit Bar - Ford Ranger PXII and Ford Everest
3-8
Chassis Mounts:
The chassis mounts developed for the 2011
on Ranger Summit bar have been retained for
the PXII / Everest Summit bar. The chassis
mounts include bracing from the bar back to
and around the chassis. These are required to
provide valuable support around the
consistency of an OE chassis weld.
The brace ties the bar into a cradle around the
chassis rather than just mounted on the face
of the chassis flange. This bracing is particularly important for vehicles used in extreme
conditions.
Under Pan Protection
Panels:
The centre under pan protection panel
includes laser cut holes to both add to
strength of the panel and aid with air
flow to the radiator and front mount
intercooler.
The centre and side protection panels are
manufactured from laser cut and folded
2mm steel. These panels are finished
with a zinc rich primer and a top satin
black powder coat.
Cover Strap:
The cover strap on ARB’s Summit Bar is
a 62.6mm formed cover strap. The press
form adds strength and visually the wider
cover strap suits the larger diameter
tube and 30mm radius of the pans. The
intersection of cover strap and buffers
is covered by a cover strap intersection
cap.
Company Ident. No. 01745956
ARB Summit Bar - Ford Ranger PXII and Ford Everest
4-8
Press Formed Top Pan:
ARB’S Summit Bar range features a pressed
form top pan. The press form adds strength
to the pan whilst allowing for the winch
cover panel to be recessed for a seamless
appearance.
Buffers, Centre Pan Grill
And Fog Light Surround:
The 2015 on Ford Ranger and Everest
Summit Bar features two piece buffers,
centre pan grill and ARB’s fog light surround
(Fog light part number 3500590 is optional.
Refer following fog light section). All three
components are designed to integrate with
each other and the bar design.
The upright section of the two piece buffer
has a style line to complement the fog light
surround. The intersection of the cover
strap and buffer is covered by a cover strap
intersection cap to neatly finish the pressed
form cover strap.
To provide access to winch clutch handles
and to assist with valuable airflow to the
radiator and intercooler the split pan has a
two piece grill for an integrated, OE style
appearance.
An access door on the left hand side allows
access to winch clutch handles. This door
also overcomes clutch lever access when
larger lights are fitted to the top pan.
Fog Lights:
ARB’s Summit Bar for the Ford Ranger
features ARB’s new fog light surround that
accepts ARB’s 51W Fog Light, part number
3500590. The surround is supplied standard
with a screw in cover if no fog light is to be
fitted.
The fog light surround will be supplied in a
natural black finish to complement the buffer
and design.
ARB Auxiliary Fog Light Loom Part number
3500530 is required if fitting the ARB Fog
Light option.
A clear fog light cover has been developed
separately under part number 3500680.
Company Ident. No. 01745956
ARB Summit Bar - Ford Ranger PXII and Ford Everest
5-8
Led Clearance Light /
Turn Signals:
Press form apertures in each wing are
provided to fit ARB’s LED clearance light /
turn signal.
Winch Model Fitment:
The ARB Summit Bar for the Ford Ranger and
Everest fits the following winches:
•
•
•
•
•
•
Warn M8000, XD9000, XP9.5 and
XDC 9.5
Warn ZEON 8, 8-S, 10 and 10-S
Warn ZEON Platinum 10, 10-S
Warn Magnum 8K, Magnum 10K
Smittybilt Gen2 X20 10K
Bushranger DV-9TH, DS-9.5TH and
Seal 9.5TH
The Summit Bar has an integrated control
box mount that recesses the control box
lower in the pan. Different mount holes and
control box mount brackets are provided to
suit different winches. Fitting instructions for
the kit have further information as to which
mount hole or bracket is suitable.
Please note that not all winches on the
market will have mount holes pre-drilled.
The recessed control box mount in
conjunction with the wider split pan greatly
assist with airflow requirements of the
Ranger.
Additional fit kits are required depending on
the winch being fitted:
•
•
•
•
3500720 WINCH INSTALL KIT
SUMMIT BAR|. This kit includes a
newly designed flip up number plate
bracket.
Warn ZEON and ZEON Platinum
fitment requires Warn part
number W89965 Short Wiring Kit.
Warn ZEON Platinum fitment may
require part No W94288 Enhanced
Signal Kit.
Winches fitted with a hawse fairlead
will require part No 3500600 Hawse
Fairlead Spacer Kit.
Company Ident. No. 01745956
ARB Summit Bar - Ford Ranger PXII and Ford Everest
6-8
Pressed Winch Cover:
ARB’s Summit Bar for the Ford Ranger and
Everest is supplied with a 4mm aluminium
press formed winch cover panel for when no
winch is being fitted. When fitted the winch
cover panel is recessed in the press form top
pan to give a level and integrated appearance.
The cover is supplied in a satin black powder
coat finish.
Antenna Mounts:
Two aerial mounts are welded to the centre
cross tube to allow fitment of UHF/AM radio
and mobile phone aerials/antennas.
Synchro pulse controlled welding is used for a
visually appealing weld with seam quality that
it comparable with that of a TIG weld.
Hi-Lift Jack Points:
Hi-Lift jack points are located directly below
the buffers. The Hi-Lift jack point is welded
directly to the upright on either side and is
designed to prevent the Hi-Lift jack from
interfering with the buffer.
Company Ident. No. 01745956
ARB Summit Bar - Ford Ranger PXII and Ford Everest
7-8
Driving Light Mounts:
The press formed top pan includes laser cut
holes for fitment of a range of compatible
driving lights including ARB Intensity,
Bushranger and IPF 800, 808 and 900 Series
lights.
Pinning holes for ARB Intensity lights are
included.
It is recommended that driving lights are
fitted at the time of bar fitment. If driving
lights are being fitted after the bar has been
fitted, the centre lower stone tray will need
to be removed to provide access to the right
hand side driving light mount.
HEAD OFFICE
POSTAL ADDRESS
CONTACT DETAILS
ARB Europe s.r.o.
Na Dlouhem c. 80, DC2,
251 01 Ricany - Jazlovice
Czech Republic
T +420 323 040 900
F +420 323 910
W arbeurope.com
Company Ident. No. 01745956
ARB Summit Bar - Ford Ranger PXII and Ford Everest
8-8
Download PDF