Blaze B-1 by - LAMAX Electronics
Blaze B-1 by
Quick Start Guide
Bluetooth 4.0 with a range up to 10 m
Simple ear-cup controls
Manage calls using Handsfree
High-quality audio experience
Audio input for conserving battery power
1. Increase volume
Go to next track
2. Power On / Off
Play / Pause
Answer / End call
3. Decrease volume
Go to previous track
4. Micro USB charging port
5. 3.5 mm audio jack
6. Microphone
7. LED indicator
5 6
1. Make sure that your device (phone, computer or music
player) is turned on and keep the devices within one
metre of each other.
2. Hold down the multi-function
button for about 3 seconds until the blue LED starts flashing rapidly.
3. On your device activate Bluetooth and search for new
Bluetooth devices.
4. Select “B-1 by LAMAX Beat“ from the list of found devices.
5. If required, enter the password “0000“ to pair the headphones.
6. When the pairing is successful the blue LED flashes every
few seconds.
Switching on
To turn on the headphones, press and hold the multifunction
button. A flashing blue LED indicates that the
headphones have been turned on.
Switching off
To turn off the headphones, press and hold the multifunction
button. When the headphones are off, the LED
stops flashing.
Playback / Controls
1. Press the multi-function
button to start and pause
2. Press to skip to the next track or press and hold to
increase volume.
3. Press to go to the previous track or press and hold to
decrease volume.
Note: When charging, these controls are deactivated.
1. To answer an incoming call, press the multi-function
2. To end a call, press the same button again.
3. To increase or decrease the volume during a call, press
and hold or .
To charge the headphones, plug one end of the cable into
the micro USB port and the other end into the USB power
supply supply with the maximum voltage of 5V, a computer
USB port or use an AC adapter designed for USB charging.
The red LED indicates it is connected to the power supply
and turns off when fully charged. Charge only under supervision.
Using headphones in passive mode
Headphones can be used as standard wired headphones to
conserve battery power. Simply plug one end of the 3.5 mm
audio cable into the input jack in the bottom of the ear-cup
and the other end to your audio device (phone, computer
or music player). Connecting the audio cable interrupts the
wireless function.
Flexible adjustable headband, together with soft ear cushions adapt to any head shape, allowing comfortable longterm use. Excessive expansion of the headphones bridge
can cause its damage.
Full English manual can be downloaded from here:
Die Bedienungsanleitung in Deutsch können Sie von hier runterladen:
Mode d‘emploi en français à télécharger ici:
Český manuál ke stažení zde:
Slovenský manuál na stiahnutie tu:
Instrukcja obsługi w języku polskim do pobrania tutaj:
Használati útmutató:
Srpski priručnik možete preuzeti ovde:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF