CM-150 CA - Philips Color Kinetics

CM-150 CA
Control Module
CM-150 CA
DIN Rail Mount, Four-Wire Terminal, 7.5/12V
Control module for large scale architectural and
media applications using Flex nodes
CM-150 CA delivers integrated data and power to Flex LED luminaires
from Philips Color Kinetics. With multiple mounting options, CM150 CA is the single solution for all large scale installations using Flex
nodes, whether color or white. An integrated test button instantly
confirms proper functioning of your devices, eliminating costly and
time-consuming reinstallation.
CK_SPEC2_DIN_4Wire_7.5-12V
CM-150 CA
Control module for large scale architectural and media applications using
Flex nodes
•Supports up to 150 W of power output—CM-150 CA
accommodates input and output voltages of 7.5, 12,
and 24 volts, so it’s compatible with all current and
discontinued Flex family products from Philips Color
Kinetics. CM-150 CA supports up to two strands of Flex,
with up to 75 nodes per strand.
•Integrated test button—CM-150 CA features an onboard
button for testing LED nodes that are attached to the
control module, even before fully installing your control
system. Press this button to instantly show a color wash
on attached Flex nodes, confirming that your devices
are working just as you expect them to. Press the button
again, and your Flex nodes will resume normal operation.
On-board indicator LEDs provide visual feedback
for normal operation, DMX and Ethernet connection
detection, and Ethernet data transmission.
•Modular and versatile—CM-150 CA is available in a
surface mount or DIN rail mount form factor, allowing
placement in indoor and outdoor environments, or in
your own custom housing. CM-150 CA is compatible with
third-party power supplies, so you can purchase the
power supplies that work best for your installation.
•Available with 3-wire or 4-wire output—3-wire output
is a cost-effective option for shorter runs of up to 7.6 m
(25 ft) from the CM-150 CA to your Flex strands. 4-wire
output offers more flexibility of placement and can be
used in runs of up to 30.5 m (100 ft) from the CM-150 CA
to your Flex strands. Longer leader cables are available
for custom configurations.
•Compatible with ActiveSite—CM-150 CA is designed to
work with ActiveSite from Philips Color Kinetics. With
ActiveSite, you can check the devices on your lighting
network right from your web browser. And because
ActiveSite knows the status of your control module,
you can instantly pinpoint a problematic CM-150 CA or
attached LED nodes from anywhere in the world.
•DMX and Ethernet input and output—CM-150 CA can
accept DMX or Ethernet data. DMX and Ethernet output
ports allow for daisy-chaining of control modules.
For detailed product information please visit
www.colorkinetics.com/ls/pds/cm150ca/.
Dimensions
97 mm (3.82 in)
90 mm (3.54 in)
8 mm
(.3 in)
31 mm
(1.2 in)
45 mm
(1.77 in)
153 mm (6.02 in)
2
CM-150 CA, DIN Rail Mount, Four-Wire Terminal, 7.5/12V Specification Sheet
Specifications
Due to continuous improvements and innovations, specifications may change without notice.
CM-150 CA
DIN Rail Mount, Four-Wire Terminal, 7.5/12V
Electrical
Physical
Input Voltage
7.5 or 12 VDC
Power Consumption
3 W at 7.5 or 12 VDC
Power Output
60 W maximum at 7.5 VDC, or
96 W maximum at 12 VDC
Fuse
(2) 5 A, fast blow fuses
Connections
Data Input Source
Philips Color Kinetics full range of controllers, including Light System
Manager, Video System Manager Pro, iPlayer 3, Antumbra iColor
Keypad, and ColorDial Pro, or third-party controllers
Power Input
Data Input/Output
V+ and GND terminal block†
Double-pair, double-entry IDC connectors‡
Power/Data Output (2) V+, GND, Data+, and Data- terminal blocks† (To luminaire)
†
‡
Date:
Type:
Firm Name:
Project:
Dimensions
153 x 97 x 31 mm (6 x 3.8 x 1.2 in)
(Height x Width x Depth)
Weight
0.2 kg (0.4 lb)
Housing Material
Plastic housing
Mounting
Temperature Ranges
DIN rail mountable
-20 to 50 °C (-4 to 122 °F) Startup
-30 to 50 °C (-22 to 122 °F) Operating
-40 to 70 °C (-40 to 158 °F) Storage
Humidity
0 to 95%, non-condensing
CoolingConvection
Certification and Safety
Certification
UL/cUL Recognized, CE
Environment
Dry Location, IP00
Terminal block connectors accept wire sizes from 0.5 to 2.1 mm2 (14 to 20 AWG).
IDC connectors accept wire sizes from 0.326 to 0.129 mm2 (22 to 26 AWG).
Part numbers
Control Module
Use Item Number when ordering in North America.
Item Number
Philips 12NC
109-000033-01
912400135767
Leader Cable, 4-Wire, 15.2 m (50 ft)
108-000080-01
912400135907
Leader Cable, 4-Wire, 30.5 m (100 ft)
108-000080-02
912400135908
CM-150 CA, DIN Rail Mount, Four-Wire Terminal, 7.5/12V, Control Module
7.5 or 12 V power supply must be ordered separately from a third party manufacturer.
Leader Cables
Additional Information
For device mounting and maintenance details, refer to the Installation Instructions included in the product packaging, or download documentation
from www.colorkinetics.com/ls/pds/cm150ca/.
Copyright © 2017 Philips Lighting Holding B.V., All rights reserved.
Chromacore, Chromasic, CK, the CK logo, Color Kinetics, the Color
Kinetics logo, ColorBlast, ColorBlaze, ColorBurst, ColorGraze,
ColorPlay, ColorReach, iW Reach, eW Reach, DIMand, EssentialWhite,
EvenBalance, eW, iColor, iColor Cove, IntelliWhite, iW, iPlayer, Optibin,
and Powercore are either registered trademarks or trademarks of Philips
Lighting Holding B.V. in the United States and/or other countries. All other
brand or product names are trademarks or registered trademarks of their
respective owners. Due to continuous improvements and innovations,
specifications may change without notice.
DAS-000163-02 R00 06 Jul 2017
Philips Color Kinetics
www.philips.com/colorkinetics
Download PDF