Control Systems Product Overview

Control
Systems
Product
Overview
Gen-set controllers
InteliLite NT
MRS
InteliLiteNT MRS models are
integrated controllers for single
engine control in Manual and
Remote Start applications,
featuring full gen-set monitoring
and protection.
The 4 MRS models are identified
by a number which defines model
capability (10, 11, 15, 16).
* Stated features available on this model
InteliLiteNT
AMF
InteliLiteNT AMF models are
integrated controllers for gen-sets
operating in single standby mode.
It meets all possible requirements
for AMF applications, including
modem control, user configuration
and full gen-set monitoring and
protection.
The 2 AMF models are identified
by a number which defines model
capability (20, 25).
Support of engines equipped with
ECU – J1939 interface (15, 16)*
Automatic or manual start/stop of the
gen-set
Push buttons and LEDs for simple control
Parameters adjustable via keyboard or PC
3 phase Generator protections
Generator measurements (50 / 60 Hz):
U1-U3, I1-I3, Hz, kVA, kW, kVAr, kWh
Configurable programmable inputs and
outputs
Event based history file (15, 16)*
Support of engines equipped with
ECU – J1939 interface (25) *
Automatic or manual start / stop of the
gen-set
Push buttons and LEDs for simple control
Parameters adjustable via keyboard or PC
Mains measurements (50 / 60 Hz): U1-U3, Hz
Generator measurements (50 / 60 Hz):
U1-U3, I1-I3, Hz, kVA, kW, kVAr, kWh
Configurable programmable inputs and
outputs
Event based history file (25)*
* Stated features available on this model
InteliCompact NT
InteliCompactNT models are new
integrated controllers for gen-sets
operating in both standby and
parallel modes. Functionality,
optimized for ease of use,
installation and configuration,
includes built-in synchronizer and
digital isochronous load sharer.
Native cooperation of up to 32
gen-sets is a standard feature.
AMF, continuous parallel function
Support of engines equipped with ECU
(J1939, Modbus and other proprietary
protocols); alarm codes displayed in text form
Baseload
Optimizing of the number of running
engines in multi-gen-set mode
Inputs/outputs configurable for various
customer needs
Event based history file
MainsCompact NT
MainsCompactNT is designed
for multiple (up to 31) gen-sets
controlled by InteliCompactNT and
operating in parallel to mains.
MainsCompactNT controller
connects the group of gen-sets to
the mains.
Mains measurement: U, I, Hz, kW, kVAr,
kVA, PF, kWh, kVAhr
Bus measurement: U, I, Hz
Mains failure detection using integrated
mains protections
Systems with as well as without master
generator breaker supported
Configurable level switches based on
mains import or object consumption
Event based history file
InteliGen NT
InteliGenNT is a comprehensive
controller for both single and
multiple gen-sets operating
in standby or parallel modes.
Compact construction is optimized
for these purposes; various HW
modifications allow the customer
to select the optimum type for a
particular application.
AMF, continuous parallel function
Support of engines equipped with ECU
(J1939, Modbus and other proprietary
protocols); alarm codes displayed in text form
Baseload, Import/Export, Analog extern
load control
Optimizing of the number of running
engines in multi-gen-set mode
Inputs/outputs configurable for various
customer needs
Event based history file with up to 500
records
Gen-set controllers
InteliSys NT
InteliSysNT is an expandable
controller for both single and
multiple gen-sets operating
in standby or parallel modes,
especially in CHP and other
complex applications. Detachable
construction (consisting of IS-NT-BB
and IS-Display or InteliVision) allows
easy installation with the potential
for many different extension
modules designed to suit individual
customer requirements.
CHP support (programmable PID loops and
other built-in PLC functions)
Support of engines equipped with ECU
(J1939, Modbus and other proprietary
protocols); alarm codes displayed in text form
Baseload, Import/Export, Analog extern,
TempByPower load control
Optimizing of the number of running
engines in multi-gen-set mode
Inputs/outputs configurable for various
customer needs
Event based history file with up to 1000
records
InteliMains NT
InteliMainsNT is designed for
multiple (up to 31) gen-sets
operating in parallel to mains.
InteliMains controller connects
the group of gen-sets to the
mains. It can serve as a bus-tie
synchronizing controller between
two groups of gen-sets.
Mains measurement: U, I, Hz, kW, kVAr,
kVA, PF, kWh, kVAhr
Bus measurement: U, I, Hz
Mains failure detection using integrated
mains protections
Bus-tie application
Selectable partial or full MCB control
Configurable level switches based on
mains import or object consumption
Event based history file
ATS controllers
InteliATS NT
InteliATS NT * models are new
controllers designed to monitor
the AC mains supply for under/
over voltage, under/over frequency
and voltage unbalance. Any mains
supply disproportion causes the
remote gen-set start and makes
change over for both generator
and mains contactors. The gen-set
requires a remote start type control
unit (e.g. the ComAp InteliLite NT
MRS 10 controller).
The models are identified by
a name which defines model
capability (STD, PWR).
Automatic transfer between mains and
generator power
On-site controller configuration
Remote configuration and monitoring
Inputs/outputs configurable for various
customer needs
Mains measurements U1-U3, Hz
Generator measurement
U1-U3, Hz
I1-I3, kVA, kW, kVAr, kWh (PWR)**
Active SMS/E-mails (PWR)**
Event based history file (PWR)**
* The product will be available in Q4 2008.
** Stated features available on this model
Generator controllers
InteliGenNT® GeCon
InteliGenNT GeCon is a
comprehensive generator
controller for single or multiple
gen-sets operating in standby or
parallel modes.
Cooperation with the engine controller
is achieved using minimum inputs and
outputs. GeCon does not take care about
engine control – adjustable option
Accepts external control of the engine and
breaker manually
Baseload, Import/Export, Analog extern
load control
Optimizing of the number of running
engines in multi-gen-set mode
Inputs/outputs configurable for various
customer needs
Event based history file with up to 500 records
Engine controllers
InteliDrive® Lite
InteliDrive Lite is a cost effective sophisticated engine controller, which features
outstanding control, monitoring and protection for both mechanical and
electronic diesel / gas engines in one unit. The extended product family offers
a range of engine specific versions suitable for land-based and marine non
classified applications.
InteliDrive®
DCU INDUSTRIAL
InteliDrive® DCU Industrial is a highly flexible sophisticated engine controller, which
features outstanding control, monitoring and protection for both mechanical and
electronic diesel / gas engines as well as peripheral equipment. Industrial software
contains a set of programmable functions like comparators, timers, PID loops, logic
functions and others for easy solution of any industrial application.
InteliDrive®
DCU MARINE
Engine control, monitoring and protection
J1939 interface supporting wide range of EFI engines
Speed measurement from pickup or from J1939
6 binary inputs and outputs, 3 analog inputs
Input/outputs configuration
Setpoints adjustable via keyboard or PC
Password protection
Engine sequencing and control
J1939 interface supporting wide range of EFI engines
Engine monitoring and protections
Integrated PLC
Speed measurement from magnetic pick-up or from J1939
Running hours meter, number of starts counter
14 binary inputs, 14 binary outputs, 8 analog inputs
Input/output configuration
Setpoints adjustable via keyboard or PC
Recommended extension: ID-SCM, ID-SCM1
InteliDrive® DCU Marine is an engine controller designed specially to meet the
demanding needs of the marine market; providing a high level of performance
coupled with extensive J1939/J1587 communication capabilities and
incorporating hardwired safety functions and primary/secondary power switching.
Engine sequencing and control
Engine monitoring and protection
Configurable J1939 interface with electronic engines including ECU Alarm
indication
Redundant module ID-RPU with hardwired safety functions activated in
backup mode
Automatic switchover to backup mode in case of detection of main unit failure
Setpoints adjustable via keyboard or PC
Recommended extension: ID-RPU
Off-road machinery controllers
InteliDrive®
MOBILE
InteliDrive Mobile is designed for harsh environment of mobile equipment such as
vehicles. It is a highly flexible sophisticated controller, which features outstanding
control, monitoring and protection for diesel and gas engines as well as driven
technology. The new controller offers range of engine specific versions.
Engine control, monitoring and protections
Integrated PLC for driven technology control
J1939 interface supporting wide range of EFI engines
Internal GSM modem and GPS location
Configurable 16 binary inputs, 16 binary outputs, 8 analog inputs,
8 analog in (or) outputs for hydraulic proportional valves
Operating temperature: -25°C - +70°C (optionally -40°C - +85°C)
Enclosure IP67
Anti condensation (Gore Membrane Venting)
Accessories
Extension modules
IS-AIN8
IG-IOM
ID-RPU
Analogue input module, 8 inputs,
CAN bus connection.
Input/output module, 8 binary and 4
analog inputs, 8 binary and 1 analog
output.
Redundant engine protection unit for
InteliDrive DCU Marine controllers.
IS-BIN16/8
IL-NT AOUT8
ID-SCM
Binary input/output module,
16 inputs, 8 outputs, CAN bus
connection.
I-AOUT8
Interface module for InteliDrive
controllers for full support of internal
PLC; 3 analog outputs, 2 frequency
inputs, 2 impulse inputs.
Analogue output module, 8 outputs,
CAN bus connection.
ID-SCM1
Cost effective Analog Speed
Governor interface with one 10V or
20 mA output.
IGS-PTM
Input/output module designed
for PT100 sensors, 8 binary and
4 analog inputs, 8 binary and 1
analog output.
8 analog gauges plug-in interface module
for InteliLite NT, Inteli/MainsCompact NT
and InteliDrive Lite controllers.
NT-Converter
Load sharing interface module
for InteliGen NT and InteliSys NT
controllers.
IGL-RA15
Extension signalling unit for
Inteli controllers, 15 LEDs with
configurable colors.
Communication modules
IL-NT RS232 + RS485
IL-NT RS232
IG-IB
RS232 + RS485 plug-in interface
for InteliATSNT, InteliLite NT, Inteli/
MainsCompact NT and InteliDrive Lite
controllers.
Extension board containing RS232
port for InteliATSNT, InteliLite NT,
Inteli/MainsCompact NT and InteliDrive
Lite controllers.
Internet bridge enables remote
connection between controllers
and superior service or monitoring
software using ethernet or modem
connection.
IL-NT S-USB
I-LB / I-LB+
USB service interface for InteliATSNT,
InteliLite NT, Inteli/MainsCompact NT
and InteliDrive Lite controllers.
Direct, modem or USB (I-LB+
version only) connection to multiple
controllers, RS485, Modbus support
for direct connection.
I-CR
Used for CAN bus extension in cases
where the maximum distance limit
would be exceeded.
IB-Lite
ID-COM
Ethernet module for InteliATSNT,
InteliLite NT, Inteli/MainsCompact NT
and InteliDrive Lite controllers.
InteliDrive communication module.
ECU Communication modules
Simulators
I-CB / (CAT DIESEL, CAT GAS, MTU MDEC, Deutz TEME)
StarterKit
Communication bridge for the mentioned engines with nonstandard
communication interface.
Portable simulator for Inteli
controllers.
MultiKit
Remote displays
I-RD-CAN
IS-Display
Remote signalling and control unit
with CAN and RS232 interface for
InteliDrive controllers.
Detachable display module for
InteliSys NT controllers.
MultiKit H
InteliVision
IG-Display
Additional display module for
InteliGen NT controllers.
Simulator of multiple gen-set
applications with InteliCompact NT,
InteliGen NT or InteliSys NT
controllers.
Controller display unit. New
generation color display unit for
either InteliGen NT, InteliSys NT or
InteliDrive controllers.
Simulator of complex site with
2 mains feeders and bus-tie
breaker.
Additional modules
IG-AVRi
Interface between InteliCompact NT,
InteliGen NT or InteliSysNT and generator AVR.
I-LBA
Starting undervoltage controller
protection.
I-RB16/8
Relay board with 16/8 relays.
PC tools
InteliMonitor
GenConfig
LiteEdit
NT
PC monitoring tool for
Inteli controllers.
PC configuration tool for InteliGen
and InteliSys NT controllers.
DriveConfig
DriveMonitor
WinScope
PC tool for InteliDrive controllers
configuration.
PC tool for InteliDrive controllers
monitoring.
Special graphical controllers’
monitoring software.
InteliSupervisor
IGS-LOG
I-CBEdit
SW tool for Gen-set fleet
management.
Continuous monitoring of
Single & Multiple gen-set controllers.
Software tool for configuration of I-CB.
IL-NT IC-NT MC-NT IG-NT IS-NT IM-NT IA-NT
InteliMonitor
„
„
„
GenConfig
LiteEdit
„
„
„
„
„
„
„
„
„
„
PC tool for configuration and monitoring of
InteliATSNT, InteliLiteNT, Inteli/MainsCompactNT
and InteliDrive Lite controllers.
ID
NT – New Technology
controller family
„
„
DriveConfig
„
DriveMonitor
„
„
„
InteliSupervisor
„
„
IGS-LOG
„
„
I-CBEdit
„
„
WinScope
„
„
„
„
What do all those
abbreviations mean?
„
„
*
„
„
„
* InteliDrive Lite only
IL – InteliLite® controller
IC - InteliCompact controller
MC – MainsCompact controller
IG – InteliGen® controller
IS – InteliSys® controller
IM – InteliMains controller
IA – InteliATS controller
ID – InteliDrive® controller
ATS – Auto Transfer Switch
AMF – Auto Mains Failure
MRS – Manual Remote Start
CHP – Combined Heat & Power
Mains protections
NPU-FUV
InteliProtec
3-phase mains protection:
Vector shift protection
2 stage over/under frequency protections
2 stage over/under voltage protections
Voltage asymmetry protections
Integrated protection solution for generators operating in
parallel to mains applications. Incorporates:
2 stage over/under
voltage protections
2 stage over/under
frequency protections
Vector shift
Rate of change of
frequencyy
Over current, NVD
Reverse power
Earth fault protections
Short term parallel
protection
CHP SUPPORT
COMPLEX
SIMPLE
STANDBY
PRIME MOVER
Engine size / Site complexity
ATS
POWER GENERATION CONTROLLER OVERVIEW
InteliSys NT
InteliGen NT
InteliATS NT
Mains Monitoring
InteliLite NT
InteliLite NT
MRS
AMF
InteliCompact NT
Simple Genset
Paralleling Genset
InteliVision is a new generation display
unit for either InteliGenNT / InteliSysNT or
InteliDrive controllers. It is designed as a
simple, easy to use Plug and Play solution,
which also features our unique TRENDS
monitoring as a standard feature.
The interactive simulator provides a
taste of the new InteliVision, with demo
and preview options illustrating screen
information and function.
lator
simu
E
IN
ONL
 www.comap.cz/intelivision
Hotel Hyatt Regency Acapulco, Mexico
Shearing machines, Belgium
The Hyatt Regency Acapulco Hotel has a prime location
on the Bay of Acapulco overlooking the Pacific Ocean and
situated in the heart of the city. To ensure guests do not
have their holiday experience spoilt by a power failure, the
hotel has a stand-by emergency power supply provided by a
1000kW Caterpillar generator.
Lefort S.A. is a recognised world leader in the design and
manufacture of mobile shearing machines specialising in
hydraulic shear balers and fragmentizers for processing scrap
iron, metal sheet and bulky items.
ComAp provided the updated switchboard, through
Dupont Electric México, with the new control panel
featuring ComAp‘s InteliGen controller for full automatic
synchronization and load management plus IG-timer to
provide a time management function for the system.
The equipment is driven by a hydraulic pump coupled to a
SCANIA engine (supplied by Werkhuizen Fr. Stevens NV) which
is controlled by InteliDrive DCU Industrial. The machine works
as a big guillotine (scissor) and is designed to initially cut and
then compress scrap metal into smaller pieces. The InteliDrive
DCU Industrial provides complete system management as well
as controlling the hydraulic pressure by means of a standard
integrated, free configurable PLC function.
„As one of the largest OEM for
Volvo Penta in Asia we have
chosen ComAp products as they
feature functions essential for our
market – such as Chinese /English
language, and they have proved
excellent in communicating with
Volvo engines“.
Eric Wang, Baifa Power,
Wuxi, China
Special Controllers‘ Monitoring Software from ComAp
www.comap.cz
Manufacturer
Local Distributor / Partner
ComAp, spol. s r. o.
Czech Republic
Phone: + 420 246 012 111
Fax: + 420 266 316 647
E-mail: info@comap.cz
Internet: www.comap.cz
© ComAp. 2008-09/CPLEPROV. All rights reserved.
Specifications in this material are subject to change without notice.