High Quality cinema systems Made in Sweden

High Quality cinema systems
C I N E M A
S Y S T E M S Made in Sweden
SUB18
High Power cinema subwoofer
2014-04
PRESENTATION SUB18
Description and features
- Designed for High quality cinema installations
- Single 18” cone speaker design
- High power handling 1400W cont.
- High sensitivity, 99 dB half space
- Vented construction for optimum frequency response
- Double spider technology for best cone control
- Reinforced cone for handling long excursions
- Vented magnet assemby for effective cooling
- Constructed with Reinforced Medium Density Fiberboard
for minimum cabinet vibrations
- 4” Voice coil for best transducer performance
- Extra thin design to allow installation where space is
limited behind the screen
Design, Facts and Applications.
The SUB18 was designed for reproducing uncompressed 96/192kHz digital HD sound in
small to medium cinemas, with a natural reproduction of low-frequency sound and effects.
Easily handling the high demands put on the subwoofers in today´s digital cinema.
Designed to allow installation behind the screen where space is limited, taking only 370
mm. in depth, also the width is very compressed.
The SUB18 are a favorite for installing in small to medium sized cinema theatres.
Specially designed bass ports prevents air flow turbulence.
Fitted with a high-power custom 18” cone speaker with a 4” voice coil mounted in a frontloaded, tuned vented bassport construction.
Stockholm, Sweden, Tel: +46 8 92 86 00, Fax: +46 8 623 07 98, Web: www.prophon.com, Mail: info@prophon.se.
All data are subjects to change without prior notice
TECHNICAL SPECIFICATIONS SUB6-HP, High Power Cinema Subwoofer
Construction
Front-loaded, tuned bassreflex
Cabinet construction
19 mm. Medium Density Fiberboard (MDF)
reinforced vented box.
Finnish
two-component lacque, black textured
External features
4 x rubber feet.
LF drivers and loading
Single 18”- high power woofers
LF driver voicecoil
4”
Power handling
LF
700W RMS (1400W cont) (2800W peak)
Nominal impedance
LF
8 ohm
Sensitivity
99dB @ 1W/1m. 8 ohm load,
Max SPL (calculated peak)
137dB @ 2,8kW/1m.
Frequency responce
24Hz - 300Hz,-6dB
Power mode
Bi-amplified with DSP processor or DSP amplifier
Connectors
Gold plated pole screw terminals
(red = positive / black = negative)
Pre-programmed
DSP System processor
PROPHON DX48, PROPHON DSP480
Suggested power on amplifier
1000W @ 8 ohm
Suggested amplifier
PROPHON PL3400, P3000, P3000DSP, P10000
Total channels on external DSP
1 input and 1 output
with DSP processed sound
Measurements mm.
(A) H1130 x (B) W540 x (C) D370
MEASUREMENTS SUB18
Stockholm, Sweden, Tel: +46 8 92 86 00, Fax: +46 8 623 07 98, Web: www.prophon.com, Mail: info@prophon.se.
All data are subjects to change without prior notice
Stockholm, Sweden, Tel: +46 8 92 86 00, Fax: +46 8 623 07 98, Web: www.prophon.com, Mail: info@prophon.se.
All data are subjects to change without prior notice