IQWrench2 Intelligent Digital Torque Wrench

Crane Electronics Inc
The force in torque management
IQWrench2
Intelligent Digital Torque Wrench
Crane Electronics Ltd
The force in torque management
Crane Electronics Inc
The force in torque management
The IQWrench2 combines all of the features of a high specification digital torque wrench with
a data collection system in one ergonomic, versatile and incredibly powerful package. Its
software can be upgraded at any time to give greater flexibility. Basic to advanced versions
are available depending on customer’s application and requirements. Barcode reader and RF
wireless transfer are also optional. Its robust and rugged construction is suitable for harsh
production environments.
Key features
ü Torque range 0.5 to 1500Nm
ü Torque and angle measurement technology
ü Point of load insensitive
ü Vibrating handle giving a clear indication of fastener status
ü Advanced software: RF communication, barcode, MoveOn, Trace, Yield
ü Head type versions: SR, fixed, Din
ü Interfaces to Crane OMS software
ü Job/Rounds settings
Crane Electronics Ltd
The force in torque management
Crane Electronics Inc
The force in torque management
IQWrench2 Product Code Creator
Supplied:
Cradle & mains lead
Calibration certificate
User manual and quick start guide
Communications software
Crane Electronics Inc
The force in torque management
*Overall Length
Accessories List
IQWrench2 Opta Charging Cradle
IQWrench2 Opta Programming Cradle
IQWrench2 Opa Power Supply
USB Cable
RS232 Cable
RF Receiver – 2 Volt free relay outputs (UK/EUR version)
RF Receiver – 2 Volt free relay outputs (USA version)
RF Receiver – 10 Volt free relay outputs (UK/EUR version)
RF Receiver – 10 Volt free relay outputs (USA version)
Carry case and foams (Suitable to carry 10,25 and 75Nm only)
IQW2S-0000-CRCCXX
IQW2S-0000-CRCPUX
IQW2S-0000-CRPXXX
090260
090184
IQRX4-0000-NET
IQRX5-0000-NET
IQRX6-0000-NET
IQRX7-0000-NET
IQW2S-0000-CRCFXX
Crane Electronics Inc
The force in torque management
IQWrench2 Technical Specification:
Measurement units: Nm, Ncm, kgfcm, kgfm, ozin, lbin, lbft (depends on span)
Measurement modes:
Track, Peak (Auto-reset), Angle, Yield, Audit, MoveOn
Data storage: 200 reading memory of both parameter values with time and date stamp
Up to 50,000 readings in job store mode
Up to 50 graphs
Printer compatability:
Via RS232 output: 40/80 columns
English, German, French, Spanish, Italian, Swedish, Czech, Portuguese, Turkish
Construction: Shaft material: Steel
Housing: Aluminium
Overload capacity: 125% rated torque
Square drives fitted with pin and spring socket retainer
DIN sockets with quick release function
Display:
Backlit graphic LCD display with backlight auto off to save power
Zero stability:
< ± 0.1% FSD/°C
Static accuracy:
± 0.5% FSD
Operating Environment:
Temperature: +5˚C to +40˚C
Ingress Protection rating: IP40. Can be used outdoors
Optional angle
measurement:
+/- 1%
Warranty:
12 months parts and labour against faulty workmanship or materials
IQWrench2 software versions: torque only or torque and angle
Basic and basic with angle
Advanced and advanced with angle
Production and production with angle
Crane Electronics Inc
The force in torque management
ID Heads
The IQWrench2 has easy selection of quick release interchangeable heads.
The Crane auto ID system can be fitted to standard DIN heads and offers up
to 999 unique IDs programmed into OMS.
The use of available automatic digital ID heads ensures a highly accurate
reading every time.
ID heads can also be used for automatic Job selection which minimizes the
input required by the operator.
Three variants of charging cradles:
Charge cradle – charging (basic & advanced IQWrench2)
RS232 – communications and charging (production IQWrench2)
USB – communications and charging (production IQWrench2)
Cradle functions:
ü Recharging the battery (for 8 hours continuous use)
ü Programming the tool with Jobs/Rounds/ID table
ü Downloading readings (if no wireless option)
Crane Electronics Inc
The force in torque management
RF
IQWrench2 operates at a user programmable
frequency of 868/915MHz according to country
of installation.
ü Data transfer from wrench to PC/PLC
ü Integration into the OMS system to collect
production data against multiple Jobs.
ü Remote selection of Jobs
ü Integration into 3rd party systems
ü Transfer of a Job to the wrench
Barcode reader:
IQWrench2 features an optional barcode
reader capable of scanning all major 1D
barcode formats.
ü Job or Round selection
ü User details to login and store against
the data
ü Link data to the part/VIN number
Crane Electronics Inc
The force in torque management
Complete torque management systems
from Crane Electronics
Crane Electronics Inc
1260 11th Street West
Milan, Illinois 61264
USA
Tel: +1 309-787-1263
www.crane-electronics.com
Crane Electronics Ltd
Watling Drive
Sketchley Meadows
Hinckley LE10 3EY
Tel: +44(0) 1455 25 14 88
www.crane-electronics.com