JBL BAR STUDIO
OWNER’S MANUAL
2
TABLE OF CONTENTS
1. INTRODUCTION
3
2. WHAT’S IN THE BOX
3
3. PLACE YOUR SOUNDBAR
3
PLACE THE SOUNDBAR ON THE TABLE
WALL MOUNT THE SOUNDBAR
4. CONNECT YOUR SOUNDBAR
4
CONNECT SOUNDBAR TO YOUR TV
CONNECT SOUNDBAR TO OTHER DEVICES
HOW TO POWER ON YOUR SOUNDBAR SYSTEM
4
4
4
3
3
9. PRODUCT SPECIFICATIONS
7
GENERAL
INPUT AND OUTPUT
BLUETOOTH SECTION
PRODUCT DIMENSION AND WEIGHT
7
7
7
7
10. TROUBLESHOOTING
SYSTEM
SOUND
BLUETOOTH
REMOTE CONTROL
8
8
8
8
8
5. USE YOUR SOUNDBAR SYSTEM
4
TO CONTROL
HOW TO USE BLUETOOTH WITH YOUR SOUNDBAR
HOW TO USE A USB DEVICE
4
5
5
6. SOUND SETTING
6
BEFORE YOU START
ADJUST THE VOLUME
CHOOSE SOUND EFFECT
6
6
6
7. RESPOND TO YOUR TV REMOTE CONTROL
6
FOR MOST SAMSUNG, LG, SONY AND VIZIO TVS
FOR OTHER TVS
6
7
8. SYSTEM
7
1. AUTO STANDBY
2. AUTO WAKE UP
3. APPLY FACTORY SETTING
4. SOFTWARE UPDATE
7
7
7
7
1. INTRODUCTION
Thank you for purchasing the JBL BAR STUDIO. The JBL BAR
STUDIO is designed to bring an extraordinary sound experience to your home entertainment system. We urge you to take a few minutes to read through this manual, which describes the product and includes step-by-step instructions to help you set up and get started.
Wall Mount Brackets
Product Information & Wall-mounted guide
x1
CONTACT US: If you have any questions about JBL BAR
STUDIO, its installation or its operation, please contact your retailer or custom installer, or visit our website at: www.JBL.com.
3. PLACE YOUR SOUNDBAR
2. WHAT’S IN THE BOX
3a. Place the Soundbar on the table
Soundbar x1
x1
Remote Control
Battery size of remote control: CR2025 x1
3b. Wall mount the Soundbar
Use tape to stick the wall-mounted paper guide on the wall, push a pen tip through the center of each mounting hole to mark the wall-mounted bracket location and remove the paper.
Power Adaptor
(4ft, 1200mm)
Power Cables*
(5ft, 1500mm)
*Power cable types and numbers varied by regions
Optical Cable
(4ft, 1200mm)
AUX cable
(4ft, 1200mm) x1 x1
Screw the wall mount brackets on the pen mark; screw the threaded mounting post into the back of the soundbar; then hook the soundbar on the wall.
x1 x1 www.jbl.com
3
4
4. CONNECT YOUR SOUNDBAR
This section helps you connect your soundbar to a TV and other devices, and set up the whole system.
Connect Soundbar to your TV
Connect your soundbar to a TV. You can listen to audio from TV programs through your soundbar.
Connect to TV through HDMI (ARC)
An HDMI connection supports digital audio and is the best option to connect to your soundbar. If your TV supports HDMI ARC, you can hear the TV audio through your soundbar by using a single
HDMI cable.
Connect Soundbar to other devices
Connect devices through analog audio cables
Using an analog cable, connect the AUX IN (3.5mm jack) on your soundbar to the AUX IN/ 3.5mm connectors on your portable devices.
AUX-IN
AUX cable
AUX-OUT
HDMI (ARC)
HDMI
Note: Do confirm that the HDMI CEC function on your TV
is turned on.
Connect to TV through Optical
An Optical connection supports digital audio and is an alternative to an HDMI audio connection.
How to power on your soundbar system
3
1
2
Note: Confirm to set your TV audio settings to support “external speakers” and disable the built-in TV speakers.
5. USE YOUR SOUNDBAR
SYSTEM
1. To Control
a. How to use top panel controls
Power Volume
Down
Volume
Up
Source
b. How to use Remote Control
1
6
2
5
8
9
14
13
15
BT
SHUFFLE
VOLUME
NIGHT
MODE
AUX
USB
MUTE
SOUND MODE
AUDIO
FEEDBACK
HDMI
OPTICAL
BASS
SURROUND
3
4
7
11
12
16
10
1) Power
2) Bluetooth
3) Aux
4) HDMI
5) Shuffle / Repeat*
6) USB
7) Optical
8) Volume +
9) Volume -
10) Mute
11) Bass +
12) Bass –
13) Sound mode**
14) Night mode On / Off
15) Audio Feedback On / Off
16) Surround On / Off
*For USB playback only; switch between shuffle/ repeat all/ repeat one/ off
**Switch between standard/ movie/ music/ voice/ sports sound mode
c. Source LED indication
Remark: Press and hold remote control Bluetooth button for
3 seconds if you want to pair another mobile device
3. How to use a USB device
Play music files located on USB storage devices through the soundbar.
1. Connect a 2.0 USB drive to your soundbar on the back of your device.
2. Press “USB” button on the remote control. If USB is detected, music will start playing automatically.
Shuffle
Press “SHUFFLE” button to switch between shuffle/ repeat all/ repeat one/ off
USB
BLUETOOTH
AUX
OPTICAL
HDMI ARC
2. How to use Bluetooth with your Soundbar
a) Press Remote Control Bluetooth button to enter Bluetooth source
PAIRING
BT
SHUFFLE
AUX
USB
HDMI
OPTICAL
VOLUME MUTE
SOUND MODE
BASS
NIGHT
MODE
AUDIO
FEEDBACK
SURROUND
b) Select “JBL Bar Studio” to pair with the soundbar
Steps: Setting -> Bluetooth -> JBL Bar Studio
CONNECTED
Settings Bluetooth
Bluetooth
DEVICES
JBL Bar Studio
Connected
Now Discoverable
Choose "JBL Bar Studio" to connect
BT AUX HDMI
SHUFFLE USB OPTICAL
VOLUME MUTE BASS
SOUND MODE
(Default)
Off NIGHT
MODE
AUDIO
FEEDBACK
SURROUND
Shuffle Repeat all
Repeat one
Before you connect a USB device, be aware of the following:
• Playback sequence is by actual physical address in USB device.
• This soundbar can play files that contain numbers or English characters only. Other languages and symbol may not be supported.
• Do not remove the USB device while it is transferring files.
• DRM-protected music files (MP3, WMA) from commercial web sites cannot be played.
Compatible USB devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB 2.0.
• Some USB devices may not be supported.
USB device requirement
• Devices which require additional program installation connected to a computer, are not supported.
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minutes to be searched. The soundbar does not support USB devices with
2000 files or more on it.
• The soundbar USB port cannot be connected to PC. Your soundbar can not be used as storage device.
• The exFAT and NTFS file system is not supported on this unit.
(FAT16/FAT32 systems are available.) www.jbl.com
5
6
• Depending on some devices, it may not available to recognize the followings on this unit.
-- External HDD
-- Card readers
-- Locked devices
-- Hard type USB devices
-- USB hub
-- Using USB extension cable
-- iPhone/iPod/iPad
-- Android device
Standard Movie Music Voice Sport
6. SOUND SETTING
This section helps you choose the ideal sound for your video or music.
Before you start
• Make the necessary connections described in the user manual.
• On the soundbar, switch to corresponding source for other devices.
4. Night mode
• For quiet listening, night mode decreases the volume of loud sounds when audio is played.
• Night mode is only available for Dolby Digital soundtracks.
• Press NIGHT MODE button to turn night mode on or off.
LED behaviour
Night mode On
LED with blink white 2 times, then keep constant white for 5 seconds
Adjust the volume
• Press VOLUME +/- button to increase or decrease a volume level.
• To mute sound, press MUTE button.
Night mode Off LED with blink white 2 times
VOLUME +/- button
Choose sound effect
1. Surround sound mode
Experience an immersive audio experience with JBL surround sound mode.
• Press SURROUND button to turn surround mode on or off.
LED behaviour
Surround On
LED with blink white 2 times, then keep constant white for 5 seconds
Surround Off LED with blink white 2 times
5. Audio feedback
Audio feedback enables audible tones indicate certain product features. When Audio feedback is ON, you will hear tones for specific actions on the JBL Bar Studio:
• Enter Bluetooth pairing
• Bluetooth device is connected
• Reach maximum volume
• Surround mode On/Off
LED behaviour
Audio feedback
On
Audio feedback
Off
LED with blink white 2 times, then keep constant white for 5 seconds
LED with blink white 2 times
• On: Create a surround listening experience.
• Off: Two-channel stereo sound. Ideal for listening to music.
2. Bass
• Press BASS +/- to change the bass level.
3. Sound mode
• Select predefined sound modes to suit your video or music.
• Press SOUND MODE button to select a sound option.
• Select the STANDARD mode if you want to enjoy the original sound.
• Select the MOVIE, MUSIC, VOICE, SPORT mode depending on the content you want to listen to.
Press and hold 5 seconds SOUND button to reset default audio setting.
7. RESPOND TO YOUR TV
REMOTE CONTROL
Use your own TV remote control to control your soundbar
7a. For most Samsung, LG, Sony and Vizio TVs*
The soundbar responds to your TV remote control automatically.
Controllable functions are volume up/down and mute. Press and hold SHUFFLE button on soundbar remote control if you want to disable this function.
BT
SHUFFLE
VOLUME
AUX
USB
MUTE
HDMI
OPTICAL
BASS
>3 s
*For non-compatible TV models, please follow section 7b and do IR remote learning
Note:
– Make sure that the sound output of your TV is set to “External speaker”.
– Depending on the remote control, this function may not work well.
– This function does not operate on LG TV’s magic remote control.
– This function may not work well when HDMI CEC is ON.
– Some remote control may not operate if you press repeatedly the volume button.
– If your TV remote control is not supported, follow section 7b and
do IR remote learning.
8. SYSTEM
1. Auto standby
This soundbar automatically switches to standby after
10 minutes of button inactivity and no audio/video play from a connected device.
2. Auto wake up
The soundbar has a signal detector that can automatically* turn the unit ON when it senses an audio signal from the last detected connection eg. AUX, Optical, Bluetooth or HDMI source.
*Depending on TV models or source devices, some devices may not be able to wake up the soundbar automatically.
3. Apply factory settings
Reset this soundbar to the default settings programmed at the factory.
• In any source mode, long press VOLUME -, VOLUME+ and
SOURCE button on soundbar top panel.
4. Software Update
JBL may offer updates for soundbar’s system firmware in the future. If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your soundbar. Please visit www.JBL.com or contact JBL call center to receive more information about downloading update files.
7b. For other TVs, do IR remote learning
To program the soundbar to respond to your TV remote control, follow these steps. First, press and hold VOLUME+ and SOURCE button to enter learning mode.
(1)
>5 s
Then, press POWER button on the soundbar and press POWER button on the TV remote control
(2)
9. PRODUCT SPECIFICATIONS
General
• Power Input
• Total Maximum Power
• Standby Power Consumption
• Soundbar Transducer Size
• Max SPL
• Frequency Response
• Operating Temperature
: 19VDC, 2.0A
: 30W
: <0.5W
: 2 x 2” woofer
2 x 1.5” tweeter
: 90db
: 60Hz - 20KHz
: 0°C - 45°C
(3)
BT
SHUFFLE
VOLUME
AUX
USB
MUTE
SOUND MODE
HDMI
OPTICAL
BASS
Input and Output
• HDMI Video Output (with Audio
Return Channel)
• HDMI HDCP Version
• Audio inputs
NIGHT
MODE
AUDIO
FEEDBACK
SURROUND
Follow the same procedure for VOLUME - and VOLUME +. For mute, press both VOLUME + and VOLUME - button on soundbar and press MUTE button on TV remote control. Press and hold
VOLUME+ and SOURCE button on soundbar again for 5 seconds and now your soundbar responds to your TV remote control*.
*Depending on TV models, the soundbar may not respond to TV remote control.
: 1
: 1.4
: 1 Analog, 1 Optical,
Bluetooth section
• Bluetooth Version
• Bluetooth Frequency Range
• Max Transmitting Power
• Modulation Type
: 4.2
: 2402MHz - 2480MHz
: 9dbm (EIRP)
: GFSK, π/4 DQPSK,
8DPSK
Product dimension and weight
• Soundbar Dimensions (W x H x D) : 614 x 58 x 86 (mm) \
• Soundbar Weight
• Packaging Dimensions (W x H x D) : 852 x 126 x 146 (mm) \
24.2” x 2.3” x 3.4”
: 1.4kg \ 3.1 lbs
33.5” x 5.0” x 5.7”
• Packaging Weight (Gross) : 2.76kg \ 6.1 lbs www.jbl.com
7
8
Note: JBL Bar Studio can only support sample rate <=96K audio but cannot support >96K audio content. There will be some expected noise output if you are playing those frequency >96K audio content.
10. TROUBLESHOOTING
If you have problems using this product, check the following points before you request service.
System
The unit will not turn on.
• Check if power cord is plugged into the outlet and the soundbar
Sound
No sound from soundbar.
• Make sure that the soundbar is not muted.
• On the remote control, select the correct audio input source
• Connect the audio cable from your soundbar to your TV or other devices.
• Reset your soundbar to its factory settings via press and hold
VOLUME -, VOLUME+ and SOURCE button on soundbar top panel
Sound is strange after sound setting adjustment
• Reset audio setting by press and hold SOUND button on remote control for 5 seconds
Distorted sound or echo.
• If you play audio from the TV through the soundbar, make sure that the TV is muted.
Bluetooth
A source device cannot connect with the soundbar.
• You have not enabled the Bluetooth function of the source device. See the user manual of the source device on how to enable the function.
• The soundbar is already connected with another Bluetooth device. Press and hold Bluetooth button on your remote control to disconnect the connected source device, then try again.
• Reboot your Bluetooth device and try to pair again with the soundbar.
Quality of audio play from a connected Bluetooth device is poor.
• The Bluetooth reception is poor. Move the source device closer to the soundbar, or remove any obstacle between the source device and the soundbar.
The connected Bluetooth device connects and disconnects constantly.
• The Bluetooth reception is poor. Move your source device closer to the soundbar, or remove any obstacle between your
Bluetooth device and the soundbar.
• For some Bluetooth device, the Bluetooth connection can be deactivated automatically to save power. This does not indicate any malfunction of the soundbar.
Remote Control
The remote control does not work.
• Check if the batteries are drained and replace with new batteries.
• If the distance between the remote control and the main unit is too far, move it closer to the unit.
Торговая марка
Назначение товара
Изготовитель
: JBL
: Активная акустическая система
: Харман Интернешнл Индастриз Инкорпорейтед, США, 06901 Коннектикут, г.Стэмфорд,
Атлантик Стрит 400, офис 1500
Страна происхождения
Импортер в Россию
: Китай
: OOO “ХАРМАН РУС СиАйЭс“, Россия, 127018, г.Москва, ул. Двинцев, д.12, к 1
Гарантийный период : 1 год
Информация о сервисных центрах : www.harman.com/ru тел. +7-800-700-0467
Срок службы : 5 лет
Товар сертифицирован
Дата производства
:
: Дата изготовления устройства определяется по двум буквенным обозначениям из второй группы
символов серийного номера изделия, следующих после разделительного знака «-». Кодировка
соответствует порядку букв латинского алфавита, начиная с января 2010 года: 000000-MY0000000,
где «M» - месяц производства (А - январь, B - февраль, C - март и т.д.) и «Y» - год производства
(A - 2010, B - 2011, C - 2012 и т.д.).
HARMAN International Industries,
Incorporated 8500 Balboa
Boulevard, Northridge, CA 91329
USA www.jbl.com
© 2017 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the
United States and/or other countries. Features, specifications and appearance are subject to change without notice. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN
International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners. The terms HDMI, the HDMI logo, and
High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries. Dolby, Dolby Audio, Pro
Logic, and the double-D symbol are trademarks of Dolby Laboratories.
TR04281_A
