Check Your Package Contents - D-Link

This product can be set up
using any current web
browser, i.e., Internet Explorer
6 or Netscape Navigator 6.2.3.
D-Link DSL-200
USB ADSL Modem
Before Your Begin
This Quick Installation Guide gives step-by-step instructions for setting up the D-Link
DSL-200 ADSL Modem. The model you have purchased may appear slightly
different from those shown in the illustrations. For more detailed information about
the ADSL Modem, its components, making network connections and technical
specifications, please refer to the User’s Manual included with your ADSL Modem.
Check Your Package Contents
These are the items included with your DSL-200 purchase:
•DSL-200 ADSL Modem (USB interface)
•CD ROM include Driver and User’s Guide
• Quick Installation Guide
•USB Cable
•Phone Cable If any of the above items are missing,
please contact your reseller.
©2006 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of
their respective holders. Software and specifications are subject to change without notice.
Install Modem Drivers
Before starting the software setup process, close all windows and quit any
application programs you are running.
1.1 Windows 98SE/ME
1) Insert the DSL-200 Installation CD into the CD-ROM drive. The system should
detect the installation program and run the program automatically. If installation
does not begin automatically after a few seconds, find the autorun.exe icon
located on the CD and double-click it. To view the contents of the CD, open My
Computer from the desktop, and right-click on your CD-ROM. Select the
“Explore” option and this will reveal the folders and files on the CD.
Insert the driver
CD supplied into
the CD-ROM
drive.
Click Install
Drivers.
2
2) Choose the appropriate driver from the driver list and click it. A notification
message will appear indicating that the setup process has begun.
Choose this
driver and click it
3) The Welcome window will appear. Make sure you have quit all other programs
and click Next.
Click Next.
3
4) In the Select Service Provider window, select Other Service Provider and click
Next.
Click Next.
5) In the Select Driver Type window, choose the driver that best suits your ADSL
connection, and then click Next.
Select WAN Driver
or LAN Driver.
Click Next.
4
6) In the Communication Settings window you must provide the PVC settings,
Encapsulation method and Modulation method for configuring the Modem.
Type in the VPI and VCI values in their respective fields.
7) In the same window, select the appropriate Encapsulation method from the
drop-down menu. You will select the encapsulation setting that is appropriate for
the driver you are installing.
For RFC 2516 PPPoE, select RFC 2516 PPPoE Encapsulation. If you using
RFC 2364 PPPoATM and your service provider have not specified an
encapsulation setting, use RFC 2364 PPPoATM NULL Encapsulation.
If you are using the LAN driver, select the appropriate RFC 1483 encapsulation
setting. If your service provider has not specified an encapsulation setting, use
RFC 1483 IPoATM Bridged LLC Encapsulation.
8) Again in the same window, select the proper Modulation settings using the dropdown menu. Your service provider will give you the appropriate Modulation
settings. Choose T1.413, Multimode, G.Lite or G.DMT. If your service provider
has not specified a modulation setting, use Multimode. Click Next to continue.
At this point you must choose the Encapsulation method and
Modulation technique used for your ADSL connection. Be sure to
have the correct information available.
Enter your VPI and VCI.
Select your
Encapsulation.
Select your Modulation.
Click Next
5
9) The Ready to Install window appears. Click Next to copy the needed driver files.
Click Next.
10) After clicking Next, the Installing screen below will appear notifying you that
your computer is downloading files and preparing for installation.
Wait for installation.
6
11) After the files are downloaded, another Installing screen will prompt you to plug
your modem into your computer. Plug the rectangular end of the USB cable into
the USB port of your PC, and then plug the square end of the USB cable into the
USB port of the ADSL Modem. The USB Modem will be detected and messages
will be displayed as the modem software is installed.
Plug in your
Modem now.
12) If you are installing Win98SE, please insert the Win 98SE disk into CD-ROM. If
you are installing Win ME, please go to next step.
7
Please insert Win
98 CD-ROM now.
13) The Found New Hardware screen will appear notifying you that your computer
has detected the modem and is currently installing it.
14) At the end of this process, the Reboot screen will appear prompting you to
restart your computer. Choose Yes, reboot the computer now because it is
necessary to reboot your computer to continue the installation, and then click
Close.
Click Close to reboot
the computer.
8
15) After restarting your computer, the Finished screen below should appear
notifying that you have successfully installed your DSL-200 Modem. Click Finish
to complete the installation process.
After reboot, click
Finish to complete
the installation.
Upon restarting your computer, a new icon (two arrows)
will appear in the
System Tray. If you are using PPP (WAN driver only) the D-Link Dial-up PPP
Connection icon
will appear on your desktop after restarting.
9
1.2 Windows 2000/XP
1) Insert the DSL-200 Installation CD into the CD-ROM drive. The system should
detect the installation program and run the program automatically. If installation
does not begin automatically after a few seconds, find the autorun.exe icon
located on the CD and double-click it. To view the contents of the CD, open My
Computer from the desktop, and right-click on your CD-ROM. Select the
“Explore” option and this will reveal the folders and files on the CD.
Insert the driver
CD supplied into
the CD-ROM
drive.
Click Install
Drivers.
2) Choose the appropriate driver from the driver list and click it. A notification
message will appear indicating that the setup process has begun.
Choose this driver
and click it
10
3) The Welcome window will appear. Make sure you have quit all other programs
and click Next.
Click Next.
4) In the Select Service Provider window, select Other Service Provider and click
Next.
Click Next.
11
5) In the Select Driver Type window, choose the driver that best suits your ADSL
connection, and then click Next.
Select WAN Driver
or LAN Driver.
Click Next.
6) In the Communication Settings window you must provide the PVC settings,
Encapsulation method and Modulation method for configuring the Modem.
Type in the VPI and VCI values in their respective fields.
7) In the same window, select the appropriate Encapsulation method from the
drop-down menu. You will select the encapsulation setting that is appropriate for
the driver you are installing.
For RFC 2516 PPPoE, select RFC 2516 PPPoE Encapsulation. If you using
RFC 2364 PPPoATM and your service provider have not specified an
encapsulation setting, use RFC 2364 PPPoATM NULL Encapsulation.
If you are using the LAN driver, select the appropriate RFC 1483 encapsulation
setting. If your service provider has not specified an encapsulation setting, use
RFC 1483 IPoATM Bridged LLC Encapsulation.
8) Again in the same window, select the proper Modulation settings using the dropdown menu. Your service provider will give you the appropriate Modulation
settings. Choose T1.413, Multimode, G.Lite or G.DMT. If your service provider
has not specified a modulation setting, use Multimode. Click Next to continue.
At this point you must choose the Encapsulation method and
Modulation technique used for your ADSL connection. Be sure to
have the correct information available.
12
Enter your VPI and VCI.
Select your Encapsulation.
Select your Modulation.
Click Next
9) The Ready To Install window appears. Click Next to copy the needed driver files.
Click Next.
13
10)
After clicking Next, the Installing screen below will appear notifying you that
your computer is downloading files and preparing for installation.
Wait for installation.
11)
After the files are downloaded, another Installing screen will prompt you to
plug your modem into your computer. Plug the rectangular end of the USB
cable into the USB port of your PC, and then plug the square end of the USB
cable into the USB port of the ADSL Modem. The USB Modem will be
detected and messages will be displayed as the modem software is installed.
Plug in your Modem
now.
14
12) The Found New Hardware screen will appear notifying you that your computer
has detected the modem and is currently installing it.
13) The Finished screen below will appear notifying that you have successfully
installed your DSL-200 Modem. Click Finish to complete the installation
process.
Click Finish to
complete the
installation.
will appear in
After finishing the installation procedure, a new icon (two arrows)
the System Tray. If you are using PPP (WAN driver only) the D-Link Dial-up PPP
Connection icon
will appear on your desktop after installing.
15
1.3 Windows XP 64bit
1) Insert the DSL-200 Installation CD into the CD-ROM drive. The system should
detect the installation program and run the program automatically. If installation
does not begin automatically after a few seconds, find the autorun.exe icon
located on the CD and double-click it. To view the contents of the CD, open My
Computer from the desktop, and right-click on your CD-ROM. Select the
“Explore” option and this will reveal the folders and files on the CD.
Click Install
Drivers.
2) Choose the appropriate driver from the driver list and click it. A notification
message will appear indicating that the setup process has begun.
Choose this driver
and click it
16
3) The Welcome window will appear. Make sure you have quit all other programs
and click Next.
Click Next.
4) In the Select Service Provider window, select Other Service Provider and click
Next.
Click Next.
17
5) In the Select Driver Type window, choose the driver that best suits your ADSL
connection, and then click Next.
Select ATM, WAN,
or LAN Driver.
Click Next.
6) In the Communication Settings window you must provide the PVC settings,
Encapsulation method and Modulation method for configuring the Modem.
Type in the VPI and VCI values in their respective fields.
7) In the same window, select the appropriate Encapsulation method from the
drop-down menu. You will select the encapsulation setting that is appropriate for
the driver you are installing.
For RFC 2516 PPPoE, select RFC 2516 PPPoE Encapsulation. If you using
RFC 2364 PPPoATM and your service provider have not specified an
encapsulation setting, use RFC 2364 PPPoATM NULL Encapsulation.
If you are using the LAN driver, select the appropriate RFC 1483 encapsulation
setting. If your service provider has not specified an encapsulation setting, use
RFC 1483 IPoATM Bridged LLC Encapsulation.
8) Again in the same window, select the proper Modulation settings using the dropdown menu. Your service provider will give you the appropriate Modulation
settings. Choose T1.413, Multimode, G.Lite or G.DMT. If your service provider
has not specified a modulation setting, use Multimode. Click Next to continue.
At this point you must choose the Encapsulation method and
Modulation technique used for your ADSL connection. Be sure to
have the correct information available.
18
Enter your VPI and VCI.
Select your Encapsulation.
Select your Modulation.
Click Next
9) The Ready To Install window appears. Click Next to copy the needed driver files
Click Next
19
10) After clicking Next, the Installing screen below will appear notifying you that
your computer is downloading files and preparing for installation.
Wait for installation.
11) After the files are downloaded, another Installing screen will prompt you to plug
your modem into your computer. Plug the rectangular end of the USB cable into
the USB port of your PC, and then plug the square end of the USB cable into the
USB port of the ADSL Modem. The USB Modem will be detected and messages
will be displayed as the modem software is installed.
Plug in your Modem
now.
20
12) The Found New Hardware screen will appear notifying you that your computer
has detected the modem and is currently installing it.
13) The Finished screen below will appear notifying that you have successfully
installed your DSL-200 Modem. Click Finish to complete the installation process.
Click Finish to
complete the
installation.
After finishing the installation procedure, a new icon (two arrows)
will appear in
the System Tray. If you are using PPP (WAN driver only) the D-Link Dial-up PPP
Connection icon
will appear on your desktop after installing.
21
Making a Connection
Fixed IP
Your need to specify the fixed IP address and other required settings in this window to
perform your connection.
Enter your IP address,
Subnet mask and Default
gateway.
Enter your Preferred and/or
Alternate DNS server.
Click OK.
22
Dynamic IP
Double click the icon
named
Connect D-Link Dial-Up PPP
Connection on desktop. Enter user
name and password provided by the
service provider to perform the
connection.
Enter your User name and
Password.
Click Dial.
23
Verify the ADSL Connection
Before you continue to the final step, make sure that the ADSL connection has been
established. This can be done easily using the Modem’s ADSL connection
monitoring feature described below.
Desktop Monitoring
A new icon will appear in the System Tray of your desktop. These colored arrows
will help you monitor the status of your ADSL connection. The table below
summarizes how to interpret the icon indicator.
System Tray Icon
ADSL Status
Training Both arrows will alternate yellow and brown in
color while during the negotiation of the ADSL connection.
Connection Established Both arrows appear dark green
when the connection has been established (and no data
is being passed in either direction).
Transmitting Data The Up arrow appears light green
when data is being transmitted.
Receiving Data The Down arrow appears light green
when data is being transmitted.
Error Two red arrows indicate an error has occurred. The
connection may have been lost.
LED Indicators
The other way to verify that the ADSL connection has been established is to view
the ADSL Link indicator on the Modem. This LED will light up when the ADSL
connection has been established. The other LED indicator on the front of the device,
the Power LED will light up when the USB cable is inserted.
Power LED
ADSL LED
24
MEMO
25
Technical Support
You can find software updates and user documentation on the
D-Link website.
Tech Support for customers within Australia:
D-Link Technical Support over the Telephone:
1300-766-868
Monday to Friday 8:00am to 8:00pm EST
Saturday 9:00am to 1:00pm EST
D-Link Technical Support over the Internet:
http://www.dlink.com.au
email:support@dlink.com.au
Tech Support for customers within New Zealand:
D-Link Technical Support over the Telephone:
0800-900-900
Monday to Friday 8:30am to 8:30pm
Saturday 9:00am to 5:00pm
D-Link Technical Support over the Internet:
http://www.dlink.co.nz
email:support@dlink.co.nz
26
Technical Support
You can find software updates and user documentation on the
D-Link website.
Tech Support for customers within South Eastern
Asia and Korea:
D-Link South Eastern Asia and Korea Technical Support
over the Telephone:
+65-6895-5355
Monday to Friday 9:00am to 12:30pm, 2:00pm-6:00pm
Singapore Time
D-Link Technical Support over the Internet:
email:support@dlink.com.sg
27
Technical Support
You can find software updates and user documentation on the
D-Link website.
Tech Support for customers within India
D-Link Technical Support over the Telephone:
+91-22-26526741
+91-22-26526696 –ext 161 to 167
Monday to Friday 9:30AM to 7:00PM
D-Link Technical Support over the Internet:
http://ww.dlink.co.in
http://www.dlink.co.in/dlink/drivers/support.asp
ftp://support.dlink.co.in
email: techsupport@dlink.co.in
28
Technical Support
You can find software updates and user documentation on the
D-Link website.
D-Link provides free technical support for customers for the
duration of the warranty period on this product.
Customers can contact D-Link technical support through our
web site or by phone.
Tech Support for customers within Russia:
D-Link Technical Support over the Telephone:
(095) 744-00-99
Monday to Friday 10:00am to 6:30pm
D-Link Technical Support over the Internet
http://www.dlink.ru
email: support@dlink.ru
29
Technical Support
You can find software updates and user documentation on the D-Link website.
Tech Support for customers within the U.A.E & North Africa:
D-Link Technical Support over the Telephone:
(971) 4-391-6480 (U.A.E)
Sunday to Wednesday 9:00am to 6:00pm GMT+4
Thursday 9:00am to 1:00pm GMT+4
D-Link Middle East & North Africa
D-Link Technical Support over the Internet:
http://support.dlink-me.com
email:support@dlink-me.com
Tech Support for customers within Israel:
D-Link Technical Support over the Telephone:
(972) 9-9715701
Sunday to Thursday 9:00am to 5:00pm
D-Link Technical Support over the Internet:
http://www.dlink.co.il/support/
e-mail: support@dlink.co.il
Tech Support for customers within Turkey:
D-Link Technical Support over the Telephone:
(+90) 212-289 56 59
Monday to Friday 9:00am to 6:00pm
D-Link Technical Support over the Internet:
http://www.dlink.com.tr
e-mail: turkiye@dlink-me.com
Tech Support for customers within Egypt:
D-Link Technical Support over the Telephone:
(202) 414-4295
Sunday to Thursday 9:00am to 5:00pm
D-Link Technical Support over the Internet:
http://support.dlink-me.com
e-mail: amostafa@dlink-me.com
30
Technical Support
You can find software updates and user documentation on the
D-Link website.
Tech Support for customers within South Africa
and Sub Sahara Region:
D-Link South Africa and Sub Sahara Technical Support
over the Telephone:
+27-12-665-2165
08600 DLINK ( For South Africa only )
Monday to Friday 8:30am to 9:00pm South Africa Time
D-Link Technical Support over the Internet:
http://www.d-link.co.za
email:support@d-link.co.za
31
Technical Support
You can find updates and user documentation on the D-Link website
Tech Support for Latin America customers:
D-Link Technical Support over the followings Telephones:
Argentina: 0800-666 1442
Chile: 800-214 422
Colombia: 01800-700 1588
Ecuador: 1800-777 711
El Salvador: 800-6137
Guatemala:1800-300 0017
Panama: 0800-560 0193
Peru: 0800-52049
Venezuela: 0800-100 3470
Monday to Friday 09:00am to 22:00pm
Monday to Friday 08:00am to 21:00pm
Monday to Friday 07:00am to 20:00pm
Monday to Friday 07:00am to 20:00pm
Monday to Friday 06:00am to 19:00pm
Monday to Friday 06:00am to 19:00pm
Monday to Friday 07:00am to 20:00pm
Monday to Friday 07:00am to 20:00pm
Monday to Friday 08:00am to 21:00pm
D-Link Technical Support over the Internet:
www.dlinkla.com
www.dlinklatinamerica.com
email:support@dlink.cl
Tech Support for customers within Brazil:
D-Link Technical Support over the Telephone:
0800-7014104
Monday to Friday 8:30am to 18:30pm
D-Link Technical Support over the Internet:
www.dlinkbrasil.com.br
email:suporte@dlinkbrasil.com.br
32