Calisto 620
Bluetooth Wireless Spearkerphone +
Bluetooth USB Adapter
User Guide
Contents
Welcome 3
System Requirements
What's in the box
Basics
3
4
5
Speakerphone Controls
6
Charge your Speakerphone 7
Battery Charging Status 7
Low Battery Warnings 8
Pairing 9
Initial Pairing 9
To Re-pair your Bluetooth USB Adapter
Reconnect 9
Connect PC and Call 10
Bluetooth USB Adapter LED Indicators
Pair Mobile Phone and Call
9
10
11
Features 12
Call Features for your Speakerphone and Bluetooth Mobile Phone
Advanced Features 12
Important Tips for Using your Speakerphone
Plantronics Spokes Software
Devices Tab 14
Applications Tab 14
Troubleshooting
12
13
14
15
2
Welcome
Congratulations on purchasing your new Plantronics Calisto® 620 wireless speakerphone. This
user guide contains instructions for setting up and using your Calisto 620 speakerphone and
BT300C Bluetooth USB adapter. (P620 wireless speakerphone and a BT300C Bluetooth USB
adapter)
Calisto 620 highlights and features
• Personal Bluetooth® wireless speakerphone peripheral device.
• Connects to your PC and Bluetooth-compatible mobile phone.
• Excellent audio quality (wideband for PC, narrowband for mobile phone).
• Full duplex audio, hear and be heard as naturally as speaking face-to-face.
• 360° microphone coverage with dual auto-switching microphones (minimizes room noise
transmission so it sounds better to the people you are talking to at the far-end).
• Integrated call control and other features via Plantronics Spokes software
• Softphone and Unified Communications client call control features - call answer/end, volume
up/down, microphone mute/un-mute, call reject
• Up to 7 hours talk time / 5 days standby time
• Small and portable, includes carrying case.
NOTE Please refer to the separate safety instructions for important product safety information
prior to installation or use.
System Requirements
Computer
• Supported operating systems: Windows XP® SP3 or later, Windows Vista® SP1 or later,
Windows® 7 SP1 or later recommended
• Processor: 400 MHz Pentium® processor or equivalent (minimum); 1 GHz Pentium processor
or equivalent (recommended)
• RAM: 96 MB (minimum); 256 MB (recommended)
• Hard disk: 1.5GB (minimum); 3GB (recommended)
3
What's in the box
Carrying case
AC USB wall charger
USB charging
cable
Bluetooth USB
adapter
Wireless speakerphone
4
Basics
Bluetooth USB Adapter
1
1 LED indicator light
Speakerphone
2
3
1
4
5
6
1 Volume up and volume down buttons
2 Bluetooth status LEDs
3 Battery status LEDs
4 Mute/Unmute microphone button
5 Call button
6 Mini USB adapter stowed on bottom of
the speakerphone
Back Panel
1
2
1 Off, on, Bluetooth pairing switch (3 position switch)
2 Power connector, firmware update connector
5
Speakerphone Controls
2
3
1
4
5
1 Volume Up/Volume Down Buttons
Increase/decrease volume Press up/down volume buttons to desired volume
Maximum or minimum volume Hold up/down buttons until max/min reached
Ringer volume Press up/down volume buttons while no call is active
2 Pairing LED
Flashing Blue/Red In pairing mode; (Pairing mode ends after 10 minutes if unsuccessful)
Solid Blue Paired successfully
3 Power LED
Two red flashes Less than two hours of talk time remaining
Three red flashes Less than 30 minutes of talk time remaining
4 Mute Button
1 short button press mutes mics; Mute LED turns
Mute microphones (far-end cannot hear
you)
solid red
Un-Mute microphones 1 short button press un-mutes microphones; Mute LED turns off
Reject an incoming call 1 long button press (2 seconds); call rejected
5 Call Button
Answer or end a call (PC or Mobile) 1 button press
Answer a 2nd call while on a call 1 button press ends first call, 2nd 1 short button press
answers 2nd call
6
Charge your Speakerphone
Charge of a minimum of 30 minutes needed for complete setup.
The speakerphone can be charged with a wall charger or with a USB cord and your PC. The
power LED on the speakerphone will be solid red when charging and off when fully charged.
A full charge with a wall charger will take approximately 1 ½ hours.
NOTE Use only the provided Calisto 620 USB wall charger. Other Plantronics wall chargers will not
work with the Calisto 620; however, the Calisto 620 charger can be used to charge other Plantronics
devices requiring a micro USB power supply.
A full charge with a USB cord and your PC will take approximately 2 ½ hours.
NOTE To charge the speakerphone with the USB cable and PC, the PC must be on and in an active
state (not standby).
Turn speakerphone off when not in use to save battery power.
Battery Charging Status
Charging Level
Red LED
Battery Charging
Battery Full
7
Low Battery Warnings
Battery Level
Red LED Flashes
PC Status*
2 to 6 hours of talk time
remaining
Less than 2 hours of talk
time remaining
Less than 30 minutes of
talk time remaining
(recharge)
NOTE Plantronics Spokes Software must be installed; status shown in icon tray.
8
Pairing
Initial Pairing
Your Bluetooth USB adapter comes pre-paired to your Speakerphone.
NOTE The Bluetooth USB adapter is only for use with the Calisto 620 and is not for use with other
Bluetooth devices. The Calisto 620 Bluetooth USB adapter is marked with a graphical identifier.
To Re-pair your Bluetooth
USB Adapter
Reconnect
In the event that your speakerphone and Bluetooth USB adapter are not paired or become
unpaired do the following:
1
Start with the speakerphone powered off.
2
Remove the Bluetooth USB adapter.
3
Place the Speakerphone in pairing mode by pressing and holding the power switch to the RIGHT
until the Bluetooth pairing LED flashes BLUE / RED
4
Insert the Bluetooth USB adapter directly into your PC USB port. The LED will flash and then
turn solid blue to indicate the speakerphone is connected to the Bluetooth USB adapter
5
Speakerphone will exit pairing mode.
The Bluetooth USB adapter and the speakerphone will automatically reconnect the
speakerphone to mobile phone and PC when speakerphone is turned off and then back on and
within range of devices.
9
Connect PC and Call
1
Power Speakerphone on.
2
Insert Bluetooth USB adapter directly into your PC USB port. The LED will flash and then turn
solid blue to indicate the speakerphone is connected to the PC. The LED remains solid blue
when not on an active call.
NOTE Do not insert directly into a docking station or hub.
NOTE It is normal to see the LED flash at start-up before connection is established.
3
Load Plantronics Spokes software by visiting www.plantronics.com/software and click on
"Download Now."
4
Check your audio settings, as necessary.
Confirm the speaker and microphone settings for your PC softphone are set to Plantronics
BT300C.
Windows 7®
Go to Control Panel -> Sound-> Playback tab, and set the Plantronics BT300C device as both the
Default Communications Device and the Default Audio Device. In the Playback tab, this is
indicated by the green checkmark.
Windows XP®
Go to Control Panel -> Sounds and Audio Devices, and in the Audio tab set the Plantronics
BT300C for both the Sound playback and Sound recording sections. In the Voice tab, select the
Plantronics BT300C item for both the Voice playback and Voice recording sections.
Bluetooth USB Adapter
LED Indicators
5
Make a test call from your computer softphone. During an active call, the Bluetooth USB
adapter will flash blue.
6
End the call by pressing the speakerphone call button.
Speakerphone powered off
None
Paired/Connected
Solid blue
Active call
Flashing blue
Audio listening
Flashing blue
10
Pair Mobile Phone and Call
1
Ensure your speakerphone is fully charged. Press and hold the power switch on the
speakerphone to the RIGHT until the indicator light flashes blue and red. The speakerphone is
now in pairing mode.
NOTE If you don't see the blue and red flash, slide the power switch all the way LEFT to turn your
speakerphone off. Then press and hold the power switch again until you see the blue and red flash.
The speakerphone will stay in pairing mode for ten minutes.
2
Activate the Bluetooth features on your phone, then use the phone's settings to
add/search/discover new Bluetooth devices.
• Blackberry® Settings/options > Bluetooth: On > Search for devices.
• iPhone Settings > General > Bluetooth> On (starts the search for devices).
• Android Phone Settings > Wireless > Bluetooth: On > Scan for devices.
• Other Consult phone manual
NOTE For detailed pairing instructions for popular mobile phones visit
www.plantronics.com/easytopair
Calisto 620
3
Some phones may request that you enter a passkey for pairing. Enter 0000 passkey if your
phone requests a passkey to pair with the speakerphone. The speakerphone LED will stop
flashing and exit pairing mode when your speakerphone and phone are successfully paired.
Calisto 620
NOTE For pairing tutorial visit: www.plantronics.com/easytopair
4
Make a test call from your mobile phone.
5
End the call by pressing the speakerphone call button.
11
Features
Call Features for your
Speakerphone and
Bluetooth Mobile Phone
Advanced Features
To place a call
Dial number on your mobile phone keypad
Redial last number
Redial number on your mobile phone
To answer a call
Short press call button
To answer a call when already on an active
Microsoft Lync call
Short press the call button to end the Microsoft
Lync call, then press again to answer mobile
phone call
To end a call
Short press call button
Reject an incoming call
Medium (2 seconds) press of the mute button
Transfer audio to mobile
Medium (2 seconds) press of the call button
Transfer audio to speakerphone
Medium (2 seconds) press of the call button
Listening to Audio via A2DP (Advanced Audio Distribution Profile for Bluetooth)
Your Calisto 620 speakerphone can play media files (music, podcasts, etc.) from any A2DPenabled mobile device.
Play/Pause
You can pause/resume your music from the mobile phone by pressing the call button once.
Simultaneous Call Handling Behavior (PC and Mobile)
You can be on an active call using a computer softphone application and receive a mobile phone
call. Pressing the call button on the speakerphone will end the computer softphone call.
Pressing the call button again will answer the mobile phone call.
NOTE Answering the call on your mobile phone sends the audio to the mobile phone and leaves the
computer softphone call active on the speakerphone
You can be on an active call on the mobile phone and receive a call on your computer
softphone. Pressing the call button on the speakerphone ends the mobile phone call. Pressing
the call button again answers the computer softphone call.
If you receive a computer softphone call and mobile call at the same time, pressing the call
button will pick up the call that came in first.
12
Important Tips for Using your Speakerphone
For Best Results
Calisto 620 is a business-quality communication device with sensitive microphones; following
the recommendations below will assure a good user experience for you and people at the
other end of the call.
• Set speakerphone in an open area during use
• Keep objects 12 inches (304 mm) away from speakerphone for best performance
• Avoid moving the unit unnecessarily
• Avoid rustling papers, tapping pencils, etc., near the speakerphone
13
Plantronics Spokes Software
Plantronics Spokes software (optional) for Windows enhances your
speakerphone's capabilities, and, enhances your user experience when used
with your PC.
For example, Plantronics Spokes software provides:
• Integrated call control for 14 popular softphones and Unified Communications (UC) clients
• Enhanced UC presence capabilities - more granular availability status means fewer
interruptions
• Useful Preferences settings
• On screen battery status
• Automated software and firmware updates
Spokes software loads when your PC is booted up and runs discretely in the background,
requiring no user intervention except via the following:
• Plantronics Control Panel — a one stop utility for all device, application, preferences and
configuration options, and product information
• Plantronics Battery Status — provides on-screen battery status for your speakerphone
• Plantronics Update Manager — provides notification and facilitates installation for your
speakerphone's firmware and Spokes software updates
To launch any of these utilities, go to: Start > Programs > Plantronics
Devices Tab
• Displays active Plantronics devices supported by Plantronics Spokes software.
• Audio Settings — Provides a convenience shortcut to Windows audio configuration options.
• Device Settings — No Device settings are available for Calisto 620 in Plantronics Control Panel.
Applications Tab
• Displays all applications enabled by Plantronics Spokes software and supported for Calisto
620.
• All supported applications which are currently running are in designated with a "check mark".
• Allows you to configure the behavior of supported media players when a softphone call is
received, and when the call has ended.
• Provides opt-in confirmation to allow Plantronics to capture usage statistics to help improve
our software.
• Allows configuration of presence information sharing with supported applications.
14
Phone Func�ons
Incoming Calls
Descrip�on
Answer / End incoming so�phone calls from the speakerphone interface
Mute Un-­‐Mute Mute / Un-­‐Mute Speakerphone mic (no transmit audio) from so�phone or Speakerphone
Volume control
Adjust so�phone (receive) volume up/down
Call Reject
Mobile / Telephone Presence
Mobile Call Presence
Mul�ple So�phone Status
Media Player Support
Pause/Mute/Do Nothing
Play/Unmute/Do Nothing
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Reject an incoming call (press and mute bu�on for 3 seconds)
x
x
When on a mobile call via speakerphone, Spokes changes presence status on MSFT OC/Lync and Skype indica�ng you are On a Call or Do Not Disturb, respec�vely.
x
x
x
If on a call on any Spokes 2.7-­‐supported so�phone, MSFT OC/Lync and Skype will indicate you are On a Call or Do Not Disturb, respec�vely.
x
x
x
x
x
x
x
x
x
dia
Ot
Pl
he
aye
r S
r
up
po
rt
nd
ow
s M
e
Av
aya
IP
A
*Spokes embedded in vendor-­‐provided plug-­‐in, all others
support by Spokes download at Plantronics web site
Wi
Calisto 620 Wireless Speakerphone
gen
t
Av
aya
IP
So
�p
ho
ne
Av
aya
on
e-­‐X
Co
Av
mm
aya
un
on
ica
e-­‐X
tor
Ag
Cis
e
nt
co IP Co
mm
un
Cis
ica
co tor
CU
CI-­‐
MO
Cis
C/ co LYN
CU
C
PC
Cis
co CU
CIC
on
ne
IBM
ct
Sa
me
�m
e P
Mi
lug
cro
-­‐In
so�
*
Ly
nc Mi
4.0
cro
+
so�
OC
20
NE
07
C S
P3
50
v4
.1 &
Sh
ore
5.1
Tel
Ca
ll M
Sh
an
ore
age
Tel
r
Co
mm
Sky
un
ica
pe
tor
Sw
yx Sw
yxI
t! *
Ap
ple
iTu
ne
s
Wi
na
mp
Spoke So�ware Support: 2.7.14092.0 and above
x
x
x
x
x
x
When an audio stream is ac�ve and the user is listening to a supported media player and a call is received, audio can be paused or muted in accordance with user preferences as setup in the PLT Control Panel (PCP)
x
x
x
When the call ends, audio can play (resume) or be unmute in accordance with user’s PCP-­‐configured preferences. x
x
x
Device Firmware Upgrade
Update Manager Support
(Speakerphone)
Direct Firmware Update (DFU) via Spokes so�ware; Spokes Update Manager automa�cally sends update no�fica�ons when available
x
My Headset Updater support
(USB Bluetooth Adapter)
DFU support for the Calisto 620 USB Bluetooth adapter via My Headset Updater; follow the prompts at: x
www.plantronics.com/us/support/myheadset/updater/
Ba�ery Status
Plantronics Ba�ery Status
Speakerphone ba�ery status on taskbar
* Requires Swyx plug-­‐in (spokes is included in plug-­‐in
** IBM requires plug-­‐in, Spokes embedded.
x
Troubleshooting
How do I know Calisto 620 is
turned on?
The 3-position (off/on/pairing) switch has a GREEN visual
indicator when in the "On" position. Pressing the volume +/buttons while the unit is ON emits a volume adjustment tone.
After the initial installation, I don't • The on-device visual indication (Bluetooth status LEDs) will only
show during the initial connection to the computer via the
see a visual indication on my
Bluetooth USB adapter. Once the initial connection is made, the
Calisto 620 showing that the
on-device indicator turns off (this is done to conserve battery
device is connected to the
power).
computer.
• There is a visual indication (BLUE LED) on the Bluetooth USB
adapter which will constantly show the Calisto 620 connection
status.
• The softphone being used will also show which device is
currently connected.
My Bluetooth USB adapter isn't
working with my Calisto 620. The
Blue LED on the adapter flashes
and never turns solid (showing
adapter/speakerphone are
connected).
Re-pair the Bluetooth adapter to the speakerphone.
• First, unplug the Bluetooth adapter from the USB port.
• Turn off the speakerphone by sliding the 3-position switch to the
left, then slide the switch all the way to the right and hold it
there until the Bluetooth LED flashes RED/BLUE.
• Plug the Bluetooth adapter back into the USB port; it flashes
then turns solid once paired.
I plugged my USB cable into Calisto
620 (with other end plugged into
the wall charger or USB port) and
the charge LED isn't indicating that
the unit is charging.
The RED charge LED lights when charging but turns OFF when
fully charged; there is no LED indication that the battery is full
once the RED LED turns off.
My Calisto 620 is not charging via
the AC wall charger.
Make sure the provided Calisto 620 USB wall charger (only) is
being used for charging; other Plantronics wall chargers will not
work with Calisto 620, however, the Calisto 620 charger can be
used with other Plantronics products.
Does the Calisto 620 provide a
voice announcement of remaining
talk time like some Plantronics
headsets?
No, there is no voice announcement of remaining talk time on
the Calisto 620. The speakerphone provides visual notification
when the battery is low. See Low Battery Warnings.
NOTE If you install Plantronics Spokes software, a battery status bar
for the device is displayed in the PC taskbar.
Can I use replaceable/dry cell
batteries with Calisto 620?
No. Calisto 620 is designed to use its rechargeable lithium ion
battery. The Calisto 620 battery is user-replaceable and
replacement batteries are available from Plantronics as an
accessory.
Call control is not working with my
softphone on my iPad though
audio is working fine.
Tablet/mobile versions of PC-based Unified Communications
clients and other softphone communication apps may not have
the same level of integration with peripheral devices as their PC
counterparts. Plantronics Spokes software contains integration
touch points for PCs which do not exist for some mobile-based
versions of these applications.
15
Is there a visual indicator on the
Calisto 620 that shows volume
level?
No. There is no visual indication of volume level or volume
adjustments on the Calisto 620.
NOTE The Calisto 620 has a mid-range default volume setting. It
provides audible indications as you adjust the volume and when you
have reached the maximum or minimum volume level.
When I'm out of Calisto 620's
Bluetooth range while on an active
mobile phone call and then come
back into Calisto 620 Bluetooth
range, Calisto 620 does not autoreconnect to the mobile phone/call
(as it does with Voyager Pro UC).
This is by design.
When Bluetooth mobile headsets reconnect to a mobile phone
when in-range, call privacy is not compromised because other
people cannot hear the tiny speaker in the headset, but auto
connecting on a speakerphone can compromise a private
conversation if audio is played over its loud speaker
unexpectedly.
For this reason, it is necessary to reconnect manually to Calisto
620 from the mobile phone UI, or, to do a 2 second key press on
Calisto 620's Call Button to move the audio back to Calisto 620.
This is for user conversation confidentiality.
At times I hear some clicking/
• Bluetooth devices, like Calisto 620, can be susceptible to
popping sounds while on a call with interference from Wi-Fi and/or other Bluetooth devices.
Calisto 620, is this distortion or
• If you use Calisto 620 near a Wi-Fi access point or in a
some sort of a product defect?
Bluetooth-intensive environment, some interference can be
experienced in the form of audible artifacts through Calisto
620's speaker.
• If these artifacts are not present when using Calisto 620 away
from Wi-Fi and/or Bluetooth- intensive environments, then it is
very likely the artifacts are caused by radio/RF interference.
Music/media played on Calisto 620
does not sound as good when
streamed from the PC as it does
when streamed for my mobile or
smartphone. Why?
The Calisto 620 Bluetooth adapter supports wideband audio for
both speech and media/music, so the fidelity is not as high as
music/media streamed via A2DP from a mobile/smartphone side,
which is Hi-Fi.
What size room and how many
participants does Calisto 620
support for group conference calls?
There are 2 variables to consider for this answer, and both
involve the perceived audio quality experiencedby listeners on
the other (far) end of a Calisto 620 call:
1 The acoustic properties of the room: Not all rooms are created
equal, and room acoustics can vary significantly.
2 The subjective opinion (or hearing abilities) of the far-end
listener(s) which can also vary significantly
With these variables considered, in general Calisto 620 can be
used in up to a 12x12 foot room with up to 6 participants.
Can the USB power cable be used
for audio-over-USB during calls?
Can Calisto 620 also function as a
corded USB device?
No. The USB cable is for power and Direct Firmware Updates
(DFU) only.
NOTE An accessory cable is available from Plantronics which
emulates the corded experience; through a single USB port on the
PC, this cable provides 1) a connection for the Minimax USB
Bluetooth adapter and 2) a power connection to the speakerphone.
(PN: 86215-02)
16
Can I sync multiple Calisto 620s to
one USB adapter (to cover a large
area)?
No. The current adapter is designed for a one-to-one connection.
Can I use Calisto 620 in my car?
Theoretically yes, but Calisto 620 is not designed to be used in a
car.
My Calisto 620 carrying case is too
small to carry the wall charger and
USB cable.
The Calisto 620 carrying case is form-fitting to the
speakerphone and is designed to protect the speakerphone only.
The wall charger and USB cable are very durable, and can be
readily carried in a computer bag, zipper pocket, etc., without
concern for damage.
17
NEED MORE HELP?
www.plantronics.com/support
Plantronics, Inc.
Plantronics BV
345 Encinal Street
South Point Building C
Santa Cruz, CA 95060
Scorpius 140
United States
2132 LR Hoofddorp, Netherlands
© 2012 Plantronics, Inc. All rights reserved. Plantronics and Calisto are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth
trademark is owned by Bluetooth SIG, Inc. and any use of the mark by Plantronics, Inc. is under license. Microsoft, Lync, Windows, and Windows XP
are registered trademarks of Microsoft Corporation in the US and other countries.
Patents US 5,210,791; Patents Pending
89397-06 (12.12)
Download PDF

advertising