PRODUCT DATASHEET
is brought to you by
SOS electronic
distribution of electronic components
Click to view availability, pricing and lifecycle information.
Visit https://www.soselectronic.com/
Datasheet begins on next page.
Accessories Cleaning Tools
The solution for cleaning lead free solder!
When using lead free you will be experienced an increased in oxidation in the wettable area of the tip. These oxides
must be removed regularly otherwise it will make the tip completely unwettable and not usable anymore. When
cleaning the tip by means of the Weller WDC Dry Cleaner a special brass wool is used. First the surplus solder is
removed by tapping the tip on the soft edge of the collector box.The final cleaning is then done by pushing and turning the tip in the brass wool. After cleaning there is still a fine amount of solder on the tip avoiding fast oxidation
of the iron layer which is an advantage versus the cleaning by the wet sponge. The brass wool can be soaked in flux
which may improve the performance further. More informations for cleaning you can find on page 154/155.
WDC Dry cleaner
No-clean flux
Minimisation of the erosion
Percentage of flux: 3,5 %
Double soldering tip lifetime
Superior wetting properties
Reduced spring effect - less solder splashes
Order-no. Model T005 15 124 99 WDC Description
Dry cleaner for soldering tips
with brass cleaning wool
Accessories:
T005 13 840 99 T005 13 824 99 Brass cleaning wool for WDC (2 pieces)
Metal wool for WDC 2 (2 pieces)
WDC 2 Dry cleaner
Order-no. Model T005 15 125 99
WDC 2 Description
Dry Cleaner for WDH safety rests with brass cleaning wool
Accessories:
T005 13 841 99 T005 13 825 99 Brass cleaning wool for WDC (2 pieces)
Metal wool for WDC 2 (2 pieces)
Cleaning sponge
Order-no. T005 22 419 99
T005 22 420 99
Description
Cleaning sponge single-layer, 70 x 55 x 16 mm
Cleaning sponge double-layer, 70 x 55 x 16 mm
Stainless steel brush
Order-no. Model T005 13 827 99
88
Description
Stainless steel brush (3 pieces)
Accessories
WPB 1 Polishing Bar
Cleaning only possible in cold state
of the soldering tip.
Further informations for cleaning you can find on page 154/155.
Order-no. Model WPB1
WPB1 Description
Polishing Bar for removal of compacted oxidised films on soldering tips.
WSW Lead free soldering wire
for longer tip lifetime
Soldering wire with integrated flux core
Superior wetting properties
Cost reduction due to reduction in tip
change frequency
Not flux soaked - no process pollution
Reduction of service costs for removing of oxidised layers
Further informations for cleaning you can find on page 154/155.
Order-no. T005 13 842 99 T005 13 843 99
T005 13 845 99
Model WSW WSW WSW Description
Soldering wire Ø 0,5 mm, 250 g
Soldering wire Ø 0,8 mm, 250 g
Soldering wire Ø 1,0 mm, 250 g
Model Tip-Activator
Description
For regeneration of oxidized tips
Tip-Activator
Cleaning only possible in hot state of the soldering tip.
Further informations for cleaning you can find on page 154/155.
Order-no. T005 13 031 99
89
Accessories Cleaning Tools
1
WDC Dry cleaner
2
3
Further informations for cleaning you can find on page 154/155.
1
2
3
4
Order-no. T005 15 126 99
Scope of supply:
T005 15 124 99 T005 13 031 99
T005 13 827 99
WPB 1
4
Model WDC
Description
Dry cleaner
WDC
Weller Dry Cleaner
Tip Activator
Stainless steel brush
Polishing Bar
1
WDC 2 Dry cleaner
2
Further informations for cleaning you can find on page 154/155.
3
Order-no. T005 15 127 99
Model WDC 2 Description
Dry cleaner
1
2
3
WDC 2
Weller Dry Cleaner
Tip Activator
Stainless steel brush
Scope of supply:
T005 15 124 99 T005 13 031 99
T005 13 827 99
The desoldering wires consists of a copper net with flux.
The special surface treatment allows efficient solder removal.
Desoldering Wires
90
Order-no. T005 13 010 99
T005 13 011 99
T005 13 012 99
Model Desoldering wire Desoldering wire
Desoldering wire
Description
1,6 m coil, width 1,5 mm
1,6 m coil, width 2 mm
1,6 m coil, width 2,5 mm
T005 13 028 99 Desoldering wire
15 m coil, width 2,5 mm
T005 13 026 99
T005 13 027 99
Desoldering wire Desoldering wire
30 m coil, width 1,5 mm
30 m coil, width 2 mm
Accessories
Liquid flux
Without brush.
Typ 1.1.3.AF-SW32,
EN29 454
Remaining flux is not corrosive
Order-no. T005 13 831 99
Description
Liquid flux (100 ml)
Order-no. T005 13 837 99
Description
Liquid flux RMA (15 ml)
Liquid flux
Without brush
The Spot-Mask is a material to protect connectors of PCBs from tinning during the reflow process.
For manual rework the Spot-Mask is easily applied and removed. Mechanical fixture after 6 min, hardened
after 2-3 hours by 20°C, 1 hour by 95°C.
Spot-Mask
Storable 12 months.
Suitable for lead free applications.
Order-no. SM15748BK Model Spot-Mask
Description
Suitable for lead free applications, 250 ml
Order-no. T005 32 099 99 T005 25 098 99
T005 26 098 99
Description
Extension cord 2-wire, 4 m for,Soldering iron TCPS
Extension cord 5-wire, 4 m, up to 50 W for
Soldering iron LR 21, MLR 21, WTA 50
Extension cord 7-wire, 3 m, up to 80 W, for Soldering iron WMP, WP 80, WSP 80
Extension cord
91