SPECIFICATIONS
Print Method
Dye-sublimation / resin thermal transfer
Resolution
300 dpi (11.8 dots/mm) continuous tone
Colors
Up to 16.7 million / 256 shades per pixel
Options include easy-to-use ribbon with disposable ribbon cartridge (EZ) and more economical and ecofriendly refill ribbon
for cartridge (ECO).
Print Ribbon Options
Print Speed**
Accepted Standard Card Sizes
Print Area
Accepted Card Thickness
Accepted Card Types
Input Hopper Card Capacity
Output Hopper Card Capacity
Card Cleaning
Memory
Software Drivers
Interface
Operating Temperature
Humidity
Dimensions
Weight
Agency Listings
Enviornmental Features
Supply Voltage
Supply Frequency
Warranty
Encoding Options
Supported Access Control
Credential Programming
Options
Software
Display
Both EZ and ECO:
ƒ Full-color with resin black and overlay panel, YMCKO*, 250 prints
ƒ Resin black (standard), 1000 prints
ECO only:
ƒ Full-color half-panel with resin black and overlay panel, YMCKO*, 350 prints
EZ only:
ƒ Full-color with two resin black panels and overlay panel, YMCKOK*, 200 prints
ƒ Resin black and overlay panel, KO*, 500 prints
ƒ Resin black (premium), 1000 prints
ƒ Dye-sublimation black and overlay panel, BO*, 500 prints
ƒ Resin green, blue, red, white, silver, gold, 1000 prints
ƒ Silver and gold metallic, 500 prints
Rewrite technology - no ribbon is required
6 seconds per card (K*); 8 seconds per card (KO*); 16 seconds per card (YMCKO*); 24 seconds per card (YMCKOK*)
CR-80 (3.375˝L x 2.125˝W / 85.6 mm L x 54 mm W); CR-79 adhesive back (3.313˝L x 2.063˝W / 84.1 mm L x 52.4 mm W)
CR-80 edge-to-edge (3.36˝L x 2.11˝W / 85.3 mm L x 53.7 mm W); CR-79 (3.3˝L x 2.04˝W / 83.8 mm L x 51.8 mm W)
.009˝ - .040˝ / 9 mil - 40 mil / .229 mm - 1.016 mm
PVC or polyester cards with polished PVC finish; monochrome resin required for100% polyester cards;
optical memory cards with PVC finish; rewrite
100 cards (.030˝ / .762 mm)
Single Sided: Up to 30 cards. Dual Sided: Up to 100 cards. (.030" / .762 mm)
Card cleaning roller integrated into ribbon cartridge; cleaning roller is automatically replaced with each ribbon change
32 MB RAM
Windows® XP / Vista™ (32 bit & 64 bit) / Server 2003 & 2008 / Windows® 7 / Windows® 8 (32 bit & 64 bit)/
MAC OS X 10.5/10.6/10.7/10.8 (Available soon) / Linux*** (Available soon)
USB 2.0, optional Ethernet with internal print server
65° to 80° F / 18° to 27° C
20–80% non-condensing
Single-sided printer: 8.8˝H x 13.7˝W x 7.9˝D / 224 mm H x 348 mm W x 201 mm D
Dual-sided printer: 9.8˝H x 18.7˝W x 9.2˝D / 249 mm H x 475 mm W x 234 mm D
Single-sided: 7.5 lbs / 3.4 Kg; dual-sided: 10 lbs / 4.54 Kg
Safety: UL 60950-2, CSA C22.2 (60950-07), and CE; EMC: FCC Class A, CE (EN 55022 Class A, EN 55024), CCC, BSMI, KC
ENERGY STAR® qualified card printer (base models only without encoders) and refillable supply cartridges (ECO)
100-240Vac, 50-60Hz, 1.6 Amps max
50 Hz / 60 Hz
Printer – One year
®
Supported smart card and magnetic stripe technologies: 125 kHz (HID Prox) reader; 13.56 MHz (iCLASS® Standard / SE / SR /
Seos, MIFARE Classic®, MIFARE Plus®, MIFARE DESFire®, MIFARE DESFire® EV1, ISO 14443 A/B, ISO 15693) read/write encoder;
contact smart card encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1)
as well as synchronous cards; ISO magnetic stripe encoding, dual high- and low-coercivity, tracks 1, 2 and 3
iCLASS® Standard/SE/SR/Seos, MIFARE Classic™, MIFARE DESFire® EV1, HID Prox
Single wire Ethernet and USB 2.0 interface for inline printing and encoding (note: single wire Ethernet encoding is only
available for iCLASS® , MIFARE®, and contact smart card encoding) - Ethernet-enabled printer supports wireless accessory;
dual-sided printing module; smart card encoding modules (contact/contactless); magnetic stripe encoding module; printer
cleaning kit; ethernet with internal print server; secure proprietary consumables system
Swift ID™ embedded badging application, FARGO Workbench™ diagnostic utility with Color Assist™ spot-color matching
Color changing status buttons
* Indicates the ribbon type and the number of ribbon panels printed where Y=yellow, M=magenta, C=cyan, K=resin black,
O=overlay, B=dye sublimation black.
** Print speed indicates an approximate print speed and is measured from the time a card drops into the output hopper
to the time the next card drops into the output hopper. Print speeds do not include encoding time or the time needed for
the PC to process the image. Process time is dependent on the size of the file, the CPU, amount of RAM and the amount
of available resources at the time of the print.
***Linux versions: Ubuntu 12.04, Debian 7.0, Fedora 18, Mandriva 2011, Red Hat 6.4, Open Suse 12.3
North America: +1 949 732 2000
Toll Free: 1 800 237 7769
Europe, Middle East, Africa: +44 1440 714 850
Asia Pacific: +852 3160 9800
Latin America: +52 55 5081 1650
hid g l o b al.com
Contact Person – JOBIN VARGHESE
Email – jobin.varghese@lipidata.in
Mobile – 98465 43782
An ASSA ABLOY Group brand
© 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, HID Global, the HID Blue Brick logo, the Chain Design and Ultracard,
Swift ID, SmartScreen, MIFARE Plus, MIFARE DESfire, iCLASS and FARGO are trademarks or registered trademarks of HID Global or its licensor(s)/
supplier(s) in the US and other countries and may not be used without permission. All other trademarks, service marks, and product or service
names are trademarks or registered trademarks of their respective owners.
2014-05-01-fargo-dtc1250e-printer-ds-en PLT-01776