SR5009 - Gibbys Electronic Supermarket

Contents
Connections
Playback
Settings
Tips
Appendix
.
AV Surround Receiver
SR5009
You can print more than one page of a PDF onto a single sheet of paper.
Front panel
Display
Rear panel
1
Remote
Owner’s Manual
Index
Contents
Connections
Playback
Accessories
Inserting the batteries
Operating range of the remote control unit
Features
High quality sound
High performance
Easy operation
Part names and functions
Front panel
Display
Rear panel
Remote control unit
Settings
Front panel
Display
Rear panel
Appendix
7
8
8
9
9
9
12
13
13
16
18
21
Connecting a playback device
Connecting a DVD player or Blu-ray Disc player
Connecting a set-top box (Satellite tuner/cable TV)
Connecting a video camcorder or game console
Connecting a device with a multi-channel output connector
Connecting an iPod or USB memory device to the USB port
Connecting an FM/AM antenna
Connecting to a home network (LAN)
Wired LAN
Wireless LAN
Connecting an external control device
REMOTE CONTROL jacks
DC OUT jack
Connecting the power cord
25
25
28
31
39
Playback
Connections
Connecting speakers
Speaker installation
Speaker connection
Speaker configuration and Amp Assign settings
Connecting a TV
Connection 1 : TV equipped with an HDMI connector and
compatible with the ARC (Audio Return Channel)
Connection 2 : TV equipped with an HDMI connector and
incompatible with the ARC (Audio Return Channel)
Connection 3 : TV equipped without an HDMI connector
Tips
Basic operation
Turning the power on
Selecting the input source
Adjusting the volume
Turning off the sound temporarily (Muting)
Playback a DVD player/Blu-ray Disc player
40
41
42
2
Remote
Index
43
44
45
46
47
48
50
52
52
53
54
54
55
56
58
58
58
59
59
59
Contents
Connections
Playback
Playing an iPod
Listening to music on an iPod
iPod Browse Mode settings
Performing repeat playback
Performing random playback
Playing a USB memory device
Playing files stored on USB memory devices
Listening to music on a Bluetooth device
Pairing with a Bluetooth device
Playing a Bluetooth device
Pairing with the Pairing Mode
Listening to FM/AM broadcasts
Listening to FM/AM broadcasts
Tuning in by entering the frequency (Direct Tune)
Changing the tune mode (Tune Mode)
Tuning in to stations and presetting them automatically (Auto
Preset Memory)
Presetting the current broadcast station (Preset Memory)
Listening to preset stations
Specify a name for the preset broadcast station (Preset Name)
Skipping preset broadcast stations (Preset Skip)
Cancelling Preset Skip
Front panel
Display
Rear panel
Settings
60
61
62
64
64
65
66
68
69
70
72
73
74
75
76
Tips
Appendix
Listening to Internet Radio
Listening to Internet Radio
Playing the last played Internet Radio station
Using vTuner to add Internet Radio stations to favorites
Playing back files stored on a PC and NAS
Applying media sharing settings
Playing back files stored on a PC and NAS
Viewing photographs on the Flickr site
Viewing photographs shared by particular users
Viewing all photographs on Flickr
Listening to Pandora®
Listening to Pandora®
Creating a new station
Listening to an existing station
Listening to created radio stations at random
Giving feedback and managing stations
Sign Out
Listening to SiriusXM Internet Radio
Listening to SiriusXM Internet Radio
Sign Out
76
77
77
78
79
80
3
Remote
Index
81
82
83
84
85
86
87
89
90
92
93
94
96
97
97
98
99
100
101
102
Contents
Connections
Playback
AirPlay function
Playing songs from your iPhone, iPod touch or iPad
Playing iTunes music with this unit
Selecting multiple speakers (devices)
Perform iTunes playback operations with the remote control unit
of this unit
Spotify Connect function
Playing Spotify music with this unit
Convenience functions
Performing repeat playback
Performing random playback
Registering to Favorites
Playing back content added to the “Save to Favorites”
Deleting content added to favorites
Searching content with keywords (Text Search)
Playing back music and a favorite picture at the same time
(Slideshow)
Setting the Slideshow Interval
Adjusting the volume of each channel to match the input source
(Channel Level Adjust)
Adjusting the tone (Tone)
Displaying your desired video during audio playback (Video
Select)
Adjusting the picture quality for your viewing environment (Picture
Mode)
Playing the same music in all zones (All Zone Stereo)
Front panel
Display
Rear panel
Settings
103
104
104
105
Tips
Appendix
Selecting a sound mode
Selecting a sound mode
Direct playback
Pure Direct playback
Auto surround playback
HDMI control function
Setting procedure
Sleep timer function
Using the sleep timer
Smart select function
Calling up the settings
Changing the settings
Web control function
Controlling the unit from a web control
Panel lock function
Disabling all key button operations
Disabling all button operations except VOLUME
Canceling the Panel lock function
Remote lock function
Disabling the sensor function of the remote control unit
Enabling the remote sensor function
Playback in ZONE2 (Separate room)
Connecting ZONE2
Playback in ZONE2
105
106
106
107
108
108
109
109
110
110
111
112
113
114
115
116
117
4
Remote
Index
118
119
120
120
121
130
130
131
132
133
134
135
136
136
138
138
138
139
140
140
140
141
141
143
Contents
Connections
Playback
Settings
Settings
Front panel
Inputs
Input Assign
Source Rename
Hide Sources
Source Level
Input Select
Speakers
Audyssey® Setup
Procedure for speaker settings (Audyssey® Setup)
Error messages
Retrieving Audyssey® Setup settings
Manual Setup
Amp Assign
Speaker Config.
Distances
Levels
Crossovers
Bass
Front Speaker
145
148
149
150
151
151
151
152
156
157
157
158
160
162
162
164
168
172
173
Menu map
Menu operations
Inputting characters
Using the keyboard screen
Audio
Dialog Level Adjust
Subwoofer Level Adjust
Surround Parameter
M-DAX
Audio Delay
Volume
Audyssey
Graphic EQ
Video
Picture Adjust
HDMI Setup
Output Settings
On Screen Display
TV Format
Display
Rear panel
Tips
5
Remote
Index
Appendix
174
174
176
176
176
177
178
178
180
186
187
188
188
189
191
192
193
194
195
Contents
Connections
Playback
Network
Information
Connection
Wi-Fi Setup
Settings
IP Control
Friendly Name
Diagnostics
Maintenance Mode
General
Language
ECO
ZONE2 Setup
Zone Rename
Smart Select Names
Trigger Out
Front Display
Information
Usage Data
Firmware
Setup Lock
Limiting the operating zone with the remote control
Front panel
Display
Rear panel
Settings
Tips
Appendix
Tips
196
196
196
197
199
200
201
201
202
203
203
203
205
206
206
207
207
208
209
210
212
213
215
217
233
Tips
Troubleshooting
Resetting factory settings
Appendix
About HDMI
Video conversion function
Playing back a USB memory devices
Playing back a Bluetooth device
Playing back a file saved on a PC or NAS
Playing back Internet Radio
Personal memory plus function
Last function memory
Sound modes and channel output
Sound modes and surround parameters
Types of input signals, and corresponding sound modes
Explanation of terms
Trademark information
Specifications
Index
License
6
Remote
Index
234
237
239
240
241
242
242
242
243
244
247
250
260
262
267
270
Contents
Connections
Playback
Settings
Tips
Appendix
Thank you for purchasing this Marantz product.
To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading this manual, be sure to keep it for future reference.
Accessories
.
Power cord
FM indoor antenna
Remote control unit
(RC024SR)
R03/AAA batteries
.
.
Microphone stand
Front panel
Display
Rear panel
7
Remote
Warranty
(for USA/for CANADA)
.
AM loop antenna
.
Cable labels
Notes on radio
.
.
.
Safety Instructions
.
CD-ROM
(Owner’s Manual)
Quick Start Guide
.
.
.
.
Check that the following parts are supplied with the product.
Index
Sound calibration
microphone
(ACM1HB)
Connections
Contents
Playback
Settings
Inserting the batteries
1
Tips
Appendix
NOTE
0 To prevent damage or leakage of battery fluid:
0 Do not use a new battery together with an old one.
0 Do not use two different types of batteries.
0 Remove the batteries from the remote control unit if it will not be in use for long
periods.
0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery
compartment and insert new batteries.
Remove the rear lid in the direction of the arrow and
remove it.
Operating range of the remote control
unit
.
Point the remote control unit at the remote sensor when operating it.
2
Insert two batteries correctly into the battery
compartment as indicated.
R03/AAA batteries
Approx. 23 ft/7 m
.
30°
Put the rear cover back on.
.
3
Front panel
Display
Rear panel
8
Remote
Index
30°
Contents
Connections
Playback
Settings
Tips
Appendix
Features
High quality sound
High performance
0 With discrete circuit technology, the power amplifier provides
0 4K 60Hz input/output supported
identical quality for all 7-channels (140 Watts x 7-channels)
For optimum realism and stunning dynamic range, the power amplifier
section features discrete power devices (not integrated circuitry).
By using high current, high power discrete power devices, the amplifier
is able to easily drive high quality speakers.
4K 60p
4:4:4
.
4K 60p
4:4:4
When 4K Ultra HD (High Definition) is used, an input/output speed of 60
frames per second (60p) is achieved for video signals. When connected
to 4K Ultra HD and 60p video signal input compatible TV, you can enjoy
the sense of realism only available from high-definition images, even
when viewing fast-moving video.
This unit also supports image processing for 4K 60p, 4:4:4 and 24-bit
videos. By processing the video at the original resolution, this unit lets
you enjoy flawless, high-definition picture quality.
Front panel
Display
Rear panel
9
Remote
Index
Contents
Connections
Playback
Settings
devices (8 inputs, 2 outputs)
resolution) to HD (720p/1080p) and 4K (v p. 234)
Up to 1080p
4K Up
scaling
/
8 2
In
Out
.
4K
Appendix
0 HDMI connections enable connection to various digital AV
0 Digital video processor upscales analog video signals (SD
4K
Tips
Front panel
Display
Rear panel
.
This unit is equipped with a 4K video upscaling function that allows
analog video or SD (Standard Definition) video to be output via HDMI at
4K (3840 × 2160 pixels) resolution. This function enables the device to
be connected to a TV using a single HDMI cable, and produces high
definition images for any video source.
This unit is equipped with 8 HDMI inputs and 2 HDMI outputs enabling
connection to various HDMI compatible devices such as Blu-ray Disc
players, game consoles and HD video camcorders. This unit is
equipped with 2 monitor outputs, enabling you to project the same
image at the same time using this unit.
10
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
0 Wireless connection with Bluetooth devices can be carried out
0 The device is equipped with a AirPlay® function in addition to
easily (v p. 68)
.
.
network functions such as Internet radio etc. (v p. 103)
You can enjoy a wide variety of content, including listening to Internet
Radio, playing audio files stored on your PC, and displaying
photographs stored on your PC on our television.
This unit also supports Apple AirPlay which lets you stream your music
library from an iPhone®, iPad®, iPod touch® or iTunes®.
You can enjoy music simply by connecting wirelessly with your
smartphone, tablet, PC, etc.
0 Compatible with the “Marantz Remote App”z for performing basic
operations of the unit with an iPad, iPhone or Android™ devices
(Google, Amazon Kindle Fire)
“Marantz Remote App” is application software that allows you to
perform basic operations with an iPad, iPhone, Android smartphone or
Android tablet such as turning the unit ON/OFF, controlling the volume,
and switching the source.
0 Playback of DSD and FLAC files via USB and networks
This unit supports the playback of high resolution audio formats such as
DSD (2.8 MHz) and FLAC 192 kHz files. It provides high quality
playback of high resolution files.
z Download the appropriate “Marantz Remote App” for your iOS or Android
devices. This unit needs to be connected to the same LAN or Wi-Fi (wireless
LAN) network that the iPhone or iPod touch is connected to.
Front panel
Display
Rear panel
11
Remote
Index
Contents
Connections
Playback
Settings
0 Multi-Room audio (v p. 117)
GMAIN ZONEH
Tips
Appendix
Easy operation
GZONE2H
0 “Setup Assistant” provides easy-to-follow setup instructions
First select the language when prompted. Then simply follow the
instructions displayed on the TV screen to set up the speakers, network,
etc.
0 Easy to use Graphical User Interface
.
This unit is equipped with a Graphical User Interface for improved
operability.
You can select and playback the respective inputs in the MAIN ZONE
and in ZONE2.
In addition, when the All Zone Stereo function is used, the music being
played back in the MAIN ZONE can be enjoyed in all the zones at the
same time, which is useful when you want to hear BGM throughout the
whole house.
0 Energy-saving design
This unit is equipped with an ECO Mode function that allows you to
enjoy music and movies while reducing the power consumption during
use, and also an auto-standby function that automatically turns off the
power supply when the unit is not in use. This helps reduce
unnecessary power use.
Front panel
Display
Rear panel
12
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Part names and functions
Front panel
q w e
r
.
o
Front panel
Q0
Display
Q1
t
Q2
Q3
y
Q4
Rear panel
Q5
Q6 Q7 Q8 Q9
13
Remote
u
i
W0
W1
Index
Contents
q we
Connections
r t
y u
Playback
Settings
Tips
Appendix
D PURE DIRECT indicator
This lights when the “Pure Direct” mode is selected as the sound mode.
(v p. 120)
i
E M-DAX indicator
This lights when the M-DAX mode is selected. (v p. 156)
F Display
This displays various pieces of information. (v p. 16)
.
G Remote control sensor
This receives signals from the remote control unit. (v p. 8)
H VOLUME knob
This adjusts the volume level. (v p. 59)
o Q0 Q1
I Headphones jack (PHONES)
This is used to connect headphones.
When the headphones are plugged into this jack, audio will no longer
be output from the connected speakers or from the PRE OUT
connectors.
A Power operation button (X)
Used to turn the power of the MAIN ZONE (room where this unit is
located) on/off (standby). (v p. 58)
B Power indicator
This is lit as follows according to the power status:
0 Off: Power on
0 Red: Normal standby
0 Orange:
0 When “HDMI Pass Through” (v p. 166) is set to “On”
0 When “HDMI Control” (v p. 166) is set to “On”
0 When “IP Control” (v p. 200) is set to “Always On”
NOTE
To prevent hearing loss, do not raise the volume level excessively when using
headphones.
J PURE DIRECT button
This switches the sound mode between Direct, Pure Direct and Auto
surround. (v p. 120, 121)
K M-DAX button
This switches the M-DAX mode. (v p. 156)
C INPUT SELECTOR knob
This selects the input source. (v p. 58)
Front panel
Display
Rear panel
14
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Q STATUS button
Each press of this switches the status information that is shown on the
display. (v p. 62)
R SOUND MODE button
Switching the sound mode. (v p. 118)
S USB port
This is used to connect USB storages (such as USB memory devices)
and the USB cable supplied with iPod. (v p. 48)
.
Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 W0
T AUX1 INPUT connectors
Used to connect devices such as a video camcorder or game console.
(v p. 46)
Remove the cap covering the connectors when you want to use them.
W1
L ZONE2 ON/OFF button
This turns the power of ZONE2 (separate room) on/off. (v p. 143)
U SETUP MIC jack
This is used to connect the supplied Sound calibration microphone.
(v p. 181)
M ZONE2 SOURCE button
This selects the input source for ZONE2. (v p. 143)
N Tuner preset channel buttons
(TUNER PRESET CH +, –)
These select preset broadcast stations. (v p. 77)
O AUX1-HDMI connector
This is used to connect HDMI output compatible devices such as video
camcorders and game consoles. (v p. 46)
P DIMMER button
Each press of this switches the brightness of the display. (v p. 207)
Front panel
Display
Rear panel
15
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Display
The input source name, sound mode, setting values and other information are displayed here.
o Tuner display
o Standard display
These light up according to the reception conditions when the input source
is set to “Tuner”.
.
e r
q
w
Front panel
Display
Rear panel
.
A Volume indicator
B Input source indicator
The currently selected input source name is displayed.
If the input source name has been changed using “Source
Rename” (v p. 176) in the menu, the input source name after the
change is displayed.
C Lights up when the broadcast is properly tuned in.
D In the FM mode, this lights up when receiving stereo broadcasts.
16
Remote
Index
Contents
Connections
Playback
Settings
o Sleep timer indicator
Tips
Appendix
o ZONE2 power on display
.
y
.
t
F This lights up when ZONE2 (separate room) power is turned on.
(v p. 143)
E This lights when the sleep mode is selected. (v p. 131)
Front panel
Display
Rear panel
17
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Rear panel
qw e
.
Q0 Q1 Q2
Front panel
r t
y
Q3
Q4
Display
u
q
i
Q5
Rear panel
t
18
Remote
Index
Q6
o
Contents
Connections
Playback
q
w er t y
Settings
q
Tips
Appendix
The antenna clip can be removed from the rear panel.
A Rotate the antenna clip 90 degrees to the left.
B Pull the antenna clip out towards yourself.
0 The antenna clip is needed when transporting this unit. Keep it in a safe place.
0 Attach the antenna clip by following the steps for removing it in reverse.
B Analog audio connectors (AUDIO)
Used to connect devices equipped with analog audio connectors.
(v p. 44, 45)
C FLASHER IN jack
Used when using a control BOX or other such control devices to control
this unit.
.
ty
D NETWORK connector
Used to connect to a LAN cable when connecting to a wired LAN
network. (v p. 52)
A Rod antennas for Bluetooth/wireless LAN
Stand this antenna upright when connecting to a network via wireless
LAN, or when connecting to a handheld device via Bluetooth.
(v p. 53)
90°
E PRE OUT connectors
Used to connect a subwoofer with built-in amplifier or power amplifier
for ZONE2. (v p. 29, 142)
F Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
(v p. 41, 45)
90°
320°
.
320°
Front panel
Display
Rear panel
19
Remote
Index
Contents
Connections
u
Playback
i
Settings
Tips
Appendix
K RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner’s manual of the home
automation controller for more information about serial control of this
unit.
o
L FM/AM antenna terminals (ANTENNA)
Used to connect FM antennas and AM loop antennas. (v p. 50)
M 7.1-channel input connectors (7.1CH IN)
Used to connect to a device that has multi-channel audio output
connectors. (v p. 47)
.
Q0Q1 Q2
Q3
Q4
Q5
N Video connectors (VIDEO)
Used to connect devices equipped with video connectors.
(v p. 44, 45)
Q6
O Speaker terminals (SPEAKERS)
Used to connect speakers. (v p. 28)
G Component video connectors (COMPONENT VIDEO)
Used to connect devices equipped with component video connectors.
(v p. 44, 45)
P REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to operate this
unit and external devices from a different room. (v p. 54)
H HDMI connectors
Used to connect devices equipped with HDMI connectors.
(v p. 40, 41, 44, 45)
NOTE
Do not touch the inner pins of the connectors on the rear panel. Electrostatic
discharge may cause permanent damage to the unit.
I AC inlet (AC IN)
Used to connect the power cord. (v p. 56)
J DC OUT jack
Used to connect devices equipped with the trigger function.
(v p. 55)
Front panel
Display
Rear panel
20
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Remote control unit
A ZONE SELECT buttons (MAIN, ZONE2)
These switch the zone (MAIN ZONE, ZONE2) that is operated through
the remote control unit. (v p. 143, 148)
q
B Input source select buttons
These selects the input source. (v p. 58, 143)
C Channel/page select buttons (CH/PAGE df)
These select radio stations registered to presets or switch pages.
(v p. 62, 77)
w
D MUTE button (:)
This mutes the output audio. (v p. 59, 144)
E Information button (INFO)
This displays the status information on the TV screen. (v p. 209)
e
r
F Cursor buttons (uio p)
These select items. (v p. 148)
t
y
G BACK button
This returns to the previous screen. (v p. 148)
.
u
Front panel
Display
Rear panel
21
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
H System buttons
These perform playback related operations. (v p. 62)
0 Skip buttons (8, 9)
0 Play/pause button (1/3)
Tuning up / Tuning down buttons (TUNE +, –)
These select either FM broadcast or AM broadcast. (v p. 74)
Q1
Q2
I SMART SELECT buttons (1 – 4)
These call up settings registered to each button, such as input source,
volume level and sound mode settings. (v p. 133)
J SOUND MODE buttons
These select the sound mode. (v p. 118)
0 MOVIE button
0 MUSIC button
0 GAME button
0 PURE button
K Remote control signal transmitter
This transmits signals from the remote control unit. (v p. 8)
L SLEEP button
This sets the sleep timer. (v p. 131)
i
o
.
Q0
Front panel
Display
Rear panel
22
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
M POWER button (X)
This turns the power on/off. (v p. 58, 143)
N ECO Mode button (G)
This switches to ECO Mode. (v p. 203)
Q3
O VOLUME buttons (df)
These adjusts the volume level. (v p. 59, 144)
P OPTION button
This displays the option menu on the TV screen. (v p. 107)
Q4
Q ENTER button
This determines the selection. (v p. 148)
Q5
R SETUP button
This displays the menu on the TV screen. (v p. 148)
Q6
Q7
.
Q8
Front panel
Display
Rear panel
23
Remote
Index
Contents
Connections
Playback
Settings
o Contents
Tips
Appendix
o Cables used for connections
25
Connecting a TV
39
Connecting a playback device
43
Connecting an iPod or USB memory device to the USB port
48
Connecting an FM/AM antenna
50
Connecting to a home network (LAN)
52
Connecting an external control device
54
Connecting the power cord
56
Provide necessary cables according to the devices you want to
connect.
Speaker cable
.
Connecting speakers
.
Subwoofer cable
.
HDMI cable
NOTE
0 Do not plug in the power cord until all connections have been completed.
However, when the “Setup Assistant” is running, follow the instructions in the
“Setup Assistant” (page 8 in the separate “Quick Start Guide”) screen for making
connections. (During “Setup Assistant” operation, the input/output connectors do
not conduct current.)
0 Do not bundle power cords together with connection cables. Doing so can result in
noise.
.
Component video cable
.
Video cable
.
Coaxial digital cable
.
Optical cable
L
L
R
R
.
Audio cable
.
LAN cable
Front panel
Display
Rear panel
24
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting speakers
Install speakers and connect them to this unit. (v p. 25, 28)
Speaker installation
FL/FR (Front
speaker left/right):
Place the FRONT left and right speakers an
equal distance from the main listening position.
The distance between each speaker and your TV
should also be the same.
C (Center
speaker):
Place the CENTER speaker in front of and at the
center of the TV, between the front left and right
speakers.
SL/SR (Surround
speaker left/right):
Place the SURROUND left and right speakers an
equal distance to the left and right sides of the
main listening position. If you don’t have
surround back speakers, move the surround
speakers slightly behind your listening position.
SBL/SBR
(Surround back
speaker left/right):
Place the SURROUND BACK left and right
speakers an equal distance from the main
listening position and directly behind the main
listening position. When using a single surround
back speaker (SB), place it directly behind the
listening position.
FHL/FHR (Front
height speakers
left/right):
Place the FRONT HEIGHT left and right
speakers just outside of the front left and right
speakers. Mount them as close to the ceiling as
possible and aim them towards the listening
position.
SW 1/2 (Subwoofer) :
Place the SUBWOOFER at a convenient location
near the front speakers.
.
Determine the speaker system depending on the number of speakers you
are using and install each speaker and subwoofer in the room.
Speaker installation is explained using this example of a typical
installation.
FHL
FHR
FL
SW1
FR
SW2
C
SL
SBL
Front panel
SR
SB
Display
SBR
Rear panel
25
Remote
Index
Contents
Connections
Playback
Settings
Tips
0 This unit is compatible with Dolby Pro Logic gz (v p. 252) which offers an even
wider and deeper surround sensation.
When using Dolby Pro Logic gz, install front height speakers.
0 Use the illustration below as a guide for how high each speaker should be
installed. The height does not need to be exactly the same.
Front height
speaker
Point slightly
downwards
At least 3.3 ft / 1 m
z
Surround
speaker
Surround back
speaker
Front speaker
GViewed from the sideH
Recommended for Dolby Pro Logic gz
.
z
Front panel
Display
Rear panel
26
Remote
Index
Appendix
Connections
Contents
Playback
Settings
o When 7.1-channel speakers are installed using
surround back speakers
Tips
Appendix
o When 7.1-channel speakers are installed using
front height speakers
FHL
FHR
FR
FL
FL
SW C
SW z2
z1
z3
z3
SL
SL
SR
SBR
- 30°
z2:90°
- 110°
z3:135°
SR
.
Listening
position
z1:22°
.
z1:22°
C
z1
z2
SBL
FR
- 150°
- 30°
z2:22°
- 45°
z3:90°
- 110°
o When 5.1-channel speakers are installed
When using a single surround back speaker, place it directly behind the listening
position.
FL
FR
SW
C
z1
z2
SL
.
SR
z1:22°
Front panel
Display
Rear panel
27
Remote
- 30°
z2:120°
Index
Contents
Connections
Playback
Settings
Speaker connection
NOTE
1. Press and hold the main unit’s ZONE2 SOURCE and STATUS for at least 3
seconds.
“Video Format < NTSC>” appears on the display.
2. Press DIMMER on the main unit twice.
NOTE
0 Disconnect this unit’s power plug from the power outlet before connecting the
speakers. Also, turn off the subwoofer.
0 Connect so that the speaker cable core wires do not protrude from the speaker
terminal. The protection circuit may be activated if the core wires touch the rear
panel or if the + and - sides touch each other. (“Protection circuit” (v p. 259))
0 Never touch the speaker terminals while the power cord is connected. Doing so
could result in electric shock. When the “Setup Assistant” (page 8 in the separate
“Quick Start Guide”) is running, follow the instructions in the “Setup Assistant”
screen for making connections. (Power is not supplied to the speaker terminals
while the “Setup Assistant” is running.)
0 Use speakers with an impedance of 4 – 16 Ω/ohms.
Display
Appendix
0 Carry out the following settings when using a speaker with an impedance of 4 – 6
Ω/ohms.
Here we connect the speakers in the room to this unit.
This section explains how to connect them using typical examples.
Front panel
Tips
Rear panel
“Sp.Imp. <8ohms>” appears on the display.
3. Press TUNER PRESET CH + or TUNER PRESET CH - on the main unit to
select the impedance.
6 Ω:
6 Ω/ohms to 8 Ω/ohms is selected even if it is for one speaker with a
connected impedance.
4 Ω:
4 Ω/ohms to 8 Ω/ohms is selected even if it is for one speaker with a
connected impedance.
4. Press the main unit’s STATUS to complete the setting.
28
Remote
Index
Contents
Connections
Playback
Settings
o Connecting the speaker cables
Appendix
o Connecting the subwoofer
Carefully check the left (L) and right (R) channels and + (red) and –
(black) polarities on the speakers being connected to this unit, and be
sure to connect the channels and polarities correctly.
Use a subwoofer cable to connect the subwoofer. Two subwoofers can
be connected to this unit.
The same signal is output from the respective subwoofer terminals.
Peel off about 3/8 inch (10 mm) of sheathing from the
tip of the speaker cable, then either twist the core wire
tightly or terminate it.
.
1
Tips
Turn the speaker terminal counterclockwise to loosen it.
.
2
.
SW1
SW2
.
3
Insert the speaker cable’s core wire to the hilt into the
speaker terminal.
Turn the speaker terminal clockwise to tighten it.
.
4
Front panel
Display
Rear panel
29
Remote
Index
Contents
Connections
Playback
Settings
o About the speaker cable label (supplied) for
channel identification
Speaker terminals
Speaker
This unit
Color
Red
CENTER
Green
SURROUND L
Light blue
SURROUND R
Blue
SURROUND BACK L
Beige
SURROUND BACK R
Brown
SUBWOOFER
Black
.
White
FRONT R
Attach the speaker cable label for each channel to its speaker cable as
shown in the diagram.
Refer to the table above and attach the label to each speaker cable.
Then, make connection so that the color of the speaker terminal
matches that of the speaker cable label.
Front panel
Display
Rear panel
Appendix
G How to attach the speaker cable label H
The channel display section for speaker terminals on the rear panel is
color-coded for each channel to be identifiable.
FRONT L
Tips
30
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Speaker configuration and Amp Assign settings
This unit has a built-in 7-channel power amplifier. In addition to the basic 5.1-channel system, a variety of speaker systems can be configured by changing
the “Amp Assign” (v p. 188) settings to suit the application, such as 7.1-channel systems, bi-amp connections and 2-channel systems for multi-zone
playback.
Perform “Amp Assign” (v p. 188) settings to suit the number of rooms and speaker configuration to be installed.
Playback speaker and zone
MAIN ZONE
ZONE2
“Amp Assign” settings
Connection
page
5.1-channel
Not used
ZONE2 (Default)
32
7.1-channel (surround back)
Not used
Surround Back (Default)
33
7.1-channel (front height)
Not used
Front Height
34
5.1-channel (bi-amp connection for front speaker)
Not used
Bi-Amp
35
5.1-channel + front speaker of second unit
Not used
Front B
36
5.1-channel
2-channel
ZONE2 (Default)
37
The sound mode that can be selected varies according to the speaker configuration. See “Relationship between sound modes and channel output” (v p. 243) for the sound
modes that are supported.
Front panel
Display
Rear panel
31
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Standard configuration and connection
n 5.1-channel
This serves as a basic 5.1-channel surround system.
Sound modes such as Dolby Pro Logic g are supported.
FL
FR
SW
C
SL
.
.
SR
Front panel
Display
Rear panel
32
SW
FR
Remote
FL
C
SR
Index
SL
Contents
Connections
Playback
Settings
Tips
Appendix
n 7.1-channel (surround back)
This 7.1-channel surround system is the same as a basic 5.1-channel system but with surround back speakers.
Sound modes such as Dolby Pro Logic gx are supported.
FL
FR
SW
SL
SR
.
SBR
SW
FR
FL
C
SR
SL
SBR
SBL
.
SBL
When using a single surround back speaker, connect it to the SURROUND BACK L
terminal.
Front panel
Display
Rear panel
33
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
n 7.1-channel (front height)
This 7.1-channel surround system is the same as a basic 5.1-channel system but with front height speakers.
Sound modes such as Dolby Pro Logic gz are supported.
FHL
FHR
FL
FR
SW
C
SL
.
.
SR
Front panel
Display
Rear panel
34
SW
FR
Remote
FL
C
SR
Index
SL
FHR
FHL
Contents
Connections
Playback
Settings
Tips
Appendix
o Applied configuration and connection
n 5.1-channel (bi-amp connection of front speaker)
This is a method of connecting separate amplifiers to the tweeter terminals and woofer terminals of bi-amp compatible speakers. This connection
enables back EMF (power returned without being output) from the woofer to flow into the tweeter without affecting the sound quality, producing a
higher sound quality.
FL
FR
(Bi-Amp)
(Bi-Amp)
SW
C
SL
.
SR
C
SW
SR
SL
NOTE
When making bi-amp connections, be sure to remove the short-circuiting plate or
wire between the speaker’s woofer and tweeter terminals.
(R)
q
(L)
w
q
FL
.
FR
Front panel
Display
Rear panel
35
Remote
Index
w
Contents
Connections
Playback
Settings
Tips
Appendix
n 5.1-channel + front speaker of second unit
This system enables switching playback between front speakers A and B as desired.
FL
(B)
FR
(A)
FL
(A)
SW
FR
(B)
C
SL
.
.
SR
Front panel
Display
Rear panel
36
SW
FR (A)
Remote
FL (A)
C
SR
Index
SL
FR (B)
FL (B)
Contents
Connections
Playback
Settings
Tips
Appendix
n 5.1-channel (MAIN ZONE) + 2-channel (ZONE2)
This connection method constructs a 5.1-channel speaker system in the MAIN ZONE and a 2-channel system in ZONE2.
MAIN ZONE
FL
FR
SW
C
SL
.
SR
ZONE2
FR
FL
C
SR
.
SW
ZONE2
R
.
ZONE2
L
Front panel
Display
Rear panel
37
Remote
Index
SL
ZONE2
R
ZONE2
L
Contents
Connections
Playback
Settings
Tips
Appendix
o Connecting an external power amplifier
0 You can use this unit as a pre-amp by connecting an external power amplifier to the PRE OUT connectors. By adding a power amplifier to each
channel, the realness of the sound can be further enhanced.
0 Select the terminal to use and connect the device.
Subwoofer
(Primary)
Subwoofer
(Secondary)
Power amplifier
AUDIO
AUDIO
AUDIO
SUBWOOFER
1
FRONT CENTER SURROUND SURROUND
BACK
SUBWOOFER
2
L
R
L
R
L
R
R
L
R
L
R
L
R
L
R
L
R
.
L
When using just one surround back speaker, connect it to the left channel (L) terminal.
Front panel
Display
Rear panel
38
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting a TV
Connect a TV to this unit so that the input video is output to the TV. You can also enjoy audio from the TV on this unit.
How to connect a TV depends on the connectors and functions equipped on the TV.
ARC (Audio Return Channel) function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable.
Is the TV equipped with an HDMI connector?
Yes
Is the TV compatible with the ARC (Audio Return Channel) ?
No
No
.
Yes
“Connection 1 : TV equipped with an HDMI
connector and compatible with the ARC (Audio
Return Channel)” (v p. 40)
Front panel
Display
“Connection 2 : TV equipped with an HDMI
connector and incompatible with the ARC (Audio
Return Channel)” (v p. 41)
Rear panel
39
Remote
“Connection 3 : TV equipped without
an HDMI connector” (v p. 42)
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connection 1 : TV equipped with an HDMI connector and compatible with the ARC
(Audio Return Channel)
Use an HDMI cable to connect a TV that is compatible with the ARC function to this unit.
Set “HDMI Control” (v p. 166) to “On” when using a TV that supports the ARC function.
TV
.
HDMI
IN
(ARC)
When using the HDMI control function, connect to the HDMI MONITOR 1 connector.
Front panel
Display
Rear panel
40
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC
(Audio Return Channel)
Use an HDMI cable to connect the TV to this unit.
To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit.
TV
IN
OPTICAL
OUT
HDMI
IN
.
OUT
Front panel
Display
Rear panel
41
Remote
Index
Connections
Contents
Playback
Settings
Tips
Connection 3 : TV equipped without an HDMI connector
Use a component video cable to connect the TV to this unit.
To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit.
TV
OUT
OPTICAL
OUT
IN
VIDEO
IN
COMPONENT VIDEO
IN
Y
PB PR
.
or
Front panel
Display
Rear panel
42
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting a playback device
This unit is equipped with three types of video input connectors (HDMI, component video and composite video) and three types of audio input connectors
(HDMI, digital audio and audio).
Select input connectors on this unit according to the connectors equipped on the device you want to connect.
If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections.
In the HDMI connection, audio and video signals can be transmitted through a single HDMI cable.
0 “Connecting a DVD player or Blu-ray Disc player” (v p. 44)
0 “Connecting a set-top box (Satellite tuner/cable TV)” (v p. 45)
0 “Connecting a video camcorder or game console” (v p. 46)
0 Connect devices to this unit as indicated by the input sources printed on the audio/video input connectors of this unit.
0 The source that is assigned to the HDMI IN, DIGITAL AUDIO IN, COMPONENT VIDEO IN, VIDEO IN and AUDIO IN connectors can be changed. See “Input
Assign” (v p. 174) on how to change the input source assigned to the input connectors.
0 To play back audio signals that are input to this unit on a TV connected via HDMI, set in the menu “HDMI Audio Out” (v p. 165) to “TV”.
Front panel
Display
Rear panel
43
Remote
Index
Contents
Connections
Playback
Settings
Tips
Connecting a DVD player or Blu-ray Disc player
This explanation uses the connection with a DVD player or Blu-ray disc player as an example.
Select the input connectors on this unit to match the connectors on the device that you want to connect to.
(HDMI incompatible device)
DVD player/
Blu-ray Disc player
VIDEO
AUDIO
AUDIO
OUT
R
L
R
COAXIAL
OUT
VIDEO
OUT
COMPONENT VIDEO
OUT
Y
PB PR
HDMI
OUT
L
or
or
L
.
R
DVD player/
Blu-ray Disc player
Front panel
Display
Rear panel
44
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Connecting a set-top box (Satellite tuner/cable TV)
This explanation uses the connection with a satellite tuner/cable TV STB as an example.
Select the input connectors on this unit to match the connectors on the device that you want to connect to.
(HDMI incompatible device)
Satellite tuner/
Cable TV
AUDIO
AUDIO
OUT
R
L
R
VIDEO
COAXIAL
OUT
COMPONENT VIDEO
OUT
Y
PB PR
VIDEO
OUT
HDMI
OUT
L
or
or
L
.
R
Satellite tuner/
Cable TV
Front panel
Display
Rear panel
45
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Connecting a video camcorder or game console
This explanation uses the connection with a video camcorders as an example.
Connect a playback device to this unit, such as a video camcorder or game console.
(HDMI incompatible device)
Video camcorder
AUDIO
VIDEO
AUDIO
OUT
L
R
VIDEO
OUT
R
L
R
HDMI
OUT
.
L
Video
camcorder
Front panel
Display
Rear panel
46
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Connecting a device with a multi-channel output connector
You can connect this unit to an external device fitted with multi-channel sound audio output connectors to enjoy music and video.
To play analog signals input from 7.1CH IN connectors, set “Input Mode” (v p. 177) to “7.1CH IN”.
Devices with a multi-channel output connector
(Blu-ray Disc player, DVD player,
External decoder etc.)
AUDIO
SUBWOOFER
FRONT
L
R
CENTER
SURROUND
L
SURROUND
BACK
R
L
R
R
L
R
L
R
L
R
L
R
L
R
.
L
0 The video signal can be connected in the same way as a Blu-ray Disc player/DVD player. “Connecting a DVD player or Blu-ray Disc player” (v p. 44)
0 When a device is connected to the SBL/SBR terminal of 7.1CH IN connectors, set “Assign Mode” (v p. 188) to “Surround Back”.
Front panel
Display
Rear panel
47
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting an iPod or USB memory device to the USB port
To connect an iPod to this unit, use the USB adapter cable that was supplied with the iPod.
For operating instructions see “Playing an iPod” (v p. 60) or “Playing a USB memory device” (v p. 65).
iPod
USB memory
device
.
or
Marantz does not guarantee that all USB memory devices will operate or receive power. When using a portable USB hard disk drive (HDD) which came with an AC adapter, use
that device’s supplied AC adapter.
NOTE
0 USB memory devices will not work via a USB hub.
0 It is not possible to use this unit by connecting the unit’s USB port to a PC via a USB cable.
0 Do not use an extension cable when connecting a USB memory device. This may cause radio interference with other devices.
Front panel
Display
Rear panel
48
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Supported iPod/iPhone models
• iPod classic
• iPod nano
• iPod touch
.
• iPhone
Front panel
Display
Rear panel
49
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting an FM/AM antenna
Connect the antenna, tune in to a broadcast and then move the antenna to
the location where there is least noise. Then use tape, etc. to fix the
antenna in this location. (“Listening to FM/AM broadcasts” (v p. 74))
AM loop antenna
(supplied)
If you are unable to receive a good broadcast signal, we recommend installing an
outdoor antenna. For details, inquire at the retail store where you purchased the unit.
NOTE
0 Do not connect two FM antennas simultaneously.
0 Make sure the AM loop antenna lead terminals do not touch metal parts of the
panel.
FM indoor antenna
(supplied)
Black
White
w
e
.
q
Front panel
Display
Rear panel
50
Remote
Index
Contents
Connections
Playback
Settings
Tips
o AM loop antenna assembly
o Using the AM loop antenna
1
Suspending on a wall
Suspend directly on a wall without assembling.
2
Put the stand section through the bottom of the loop
antenna from the rear and bend it forward.
Insert the projecting part into the square hole in the
stand.
Stand
Square hole
Nail, tack, etc.
.
Loop antenna
Standing alone
Use the procedure shown above to assemble.
When assembling, refer to “AM loop antenna assembly”.
.
Projecting part
.
Front panel
Display
Appendix
Rear panel
51
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting to a home network (LAN)
This unit can connect to a network using a wired LAN or wireless LAN.
You can connect this unit to your home network (LAN) to enable various
types of playback and operations as described below.
0 Playback of network audio such as Internet Radio and from your media
server(s)
0 Playback of music content from online streaming services
0 Using the Apple AirPlay function
0 Operation on this unit via the network
0 Firmware Update
Wired LAN
.
To make connections via wired LAN, use a LAN cable to connect the
router to this unit as shown in the figure below.
PC
NAS
(Network Attached
Storage)
Modem
For connections to the Internet, contact an ISP (Internet Service
Provider) or a computer shop.
Internet
To WAN side
To LAN port
To LAN port
LAN port/
Ethernet
connector
Router
Front panel
Display
Rear panel
52
Remote
Index
LAN port/
Ethernet
connector
Contents
Connections
Playback
Settings
Wireless LAN
Modem
0
0
To WAN side
0
0
0 Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
0 Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching hub with a
speed of 100 Mbps or greater.
Only use a shielded STP or ScTP LAN cable (readily available at electronics
stores). (CAT-5 or greater recommended)
The normal shielded-type LAN cable is recommended.
If a flat-type cable or unshielded-type cable is used, other devices could be
affected by noise.
When using a router that supports the WPS(Wi-Fi Protected Setup)function, WiFi connection can be carried out easily.
When using this unit connected to a network with no DHCP function, configure the
IP address, etc. in “Network” (v p. 196).
NOTE
Router with access point
0 The types of routers that can be used depend on the ISP. Contact your ISP or a
computer shop for details.
0 This unit is not compatible with PPPoE. A PPPoE compatible router is required if
your contracted line is not set using PPPoE.
0 Do not connect an NETWORK connector directly to the LAN port / Ethernet
connector on your computer.
0 Various online services may be discontinued without prior notice.
.
Front panel
Display
Appendix
0 When using this unit, we recommend you use a router equipped with the following
functions:
When connecting to a wireless LAN network, stand the rod antenna for
wireless LAN/Bluetooth connection upright on the rear panel.
See “Wi-Fi Setup” (v p. 197) on how to connect to a wireless LAN
router.
Internet
Tips
Rear panel
53
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Connecting an external control device
REMOTE CONTROL jacks
o Remotely connecting Marantz devices
o Performing operations by RC on this unit
without visual contact
When you are using a Marantz device other than this unit that supports
remote connection, you can transmit remote control signals just by
connecting the device to the REMOTE CONTROL IN/OUT connector with
a monaural cable.
Set the remote control switch located on the rear panel of the connected
audio component to “EXTERNAL” or “EXT.” to use this feature.
You can connect an external IR receiver to the REMOTE CONTROL
connectors to perform operations on this unit with the supplied remote
control unit without visual contact. This might be necessary if the unit is
hidden in a cupboard or corner, so you can’t directly point with the remote
control unit to the device.
To do this, disable the remote control signal receiving function (“Remote
lock function” (v p. 140)).
Infrared
retransmitter
.
.
RC OUT
NOTE
When the remote control signal receiving function is disabled, you can not perform
operations with the remote control unit.
Front panel
Display
Rear panel
54
Remote
Index
Contents
Connections
Playback
Settings
Tips
DC OUT jack
When a device with DC IN jack is connected, the connected device’s
power on/standby can be controlled through linked operation to this unit.
The DC OUT jack outputs a maximum 12 V DC /150 mA electrical signal.
.
12 V DC/150 mA trigger-compatible device
NOTE
0 Use a monaural mini-plug cable for connecting the DC OUT jacks. Do not use a
stereo mini-plug cable.
0 If the permissible trigger input level for the connected device is larger than 12 V
DC/150 mA, or has shorted, the DC OUT jack cannot be used. In this case, turn off
the power to the unit, and disconnect DC OUT jack.
Front panel
Display
Rear panel
55
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Connecting the power cord
After completing all the connections, insert the power plug into the power outlet.
Power cord (supplied)
.
To household power outlet
(AC 120 V, 60 Hz)
Front panel
Display
Rear panel
56
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
o Contents
Playback network audio/service
Basic operation
Listening to Internet Radio
81
Playing back files stored on a PC and NAS
85
Viewing photographs on the Flickr site
89
Listening to Pandora®
93
Turning the power on
58
Selecting the input source
58
Adjusting the volume
59
Turning off the sound temporarily (Muting)
59
Selecting a sound mode
118
Playback a device
Playing a DVD player/Blu-ray Disc player
59
Playing an iPod
60
Playing a USB memory device
65
Playing a Bluetooth device
70
Listening to FM/AM broadcasts
73
Listening to SiriusXM Internet Radio
100
AirPlay function
103
Spotify Connect function
106
Convenience functions
Convenience functions
107
HDMI control function
130
Sleep timer function
131
Smart select function
133
Panel lock function
138
Remote lock function
140
Other functions
Front panel
Display
Rear panel
57
Web control function
136
Playback in ZONE2 (Separate room)
141
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Basic operation
ZONE SELECT
MAIN
CBL/SAT
Input source
select buttons
POWER
ZONE 2
SLEEP
DVD
Blu-ray
MEDIA
PLAYER
GAME
AUX1
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
ONLINE
MUSIC
Turning the power on
POWER X
1
Press POWER X to turn on power to the unit.
0 You can press the input source select button when the unit is in standby mode to
turn on the power.
0 You can also switch the power to standby by pressing X on the main unit.
INTERNET
RADIO
ECO
CH / PAGE
MUTE :
VOLUME
MUTE
INFO
Selecting the input source
VOLUME df
1
OPTION
Press the input source select button to be played back.
The desired input source can be selected directly.
ENTER
BACK
TUNE
SETUP
-
TUNE
You can also select the input source by turning INPUT SELECTOR on the main unit.
+
SMART SELECT
1
3
4
PURE
.
MOVIE
2
SOUND MODE
MUSIC
GAME
Front panel
Display
Rear panel
58
Remote
Index
Contents
Connections
Playback
Settings
Adjusting the volume
1
Use VOLUME df to adjust the volume.
The following describes the procedure for playing DVD player/Blu-ray Disc
player.
1
2
3
Turning off the sound temporarily
(Muting)
4
Press MUTE :.
0 “MUTE” appears on the display.
0 : appears on the TV screen.
Prepare for playback.
A Turn on the power of the TV, subwoofer and player.
B Change the TV input to the input of this unit.
Press POWER X to turn on power to the unit.
Press DVD or Blu-ray to switch an input source for a
player used for playback.
Play the DVD player or Blu-ray Disc player.
o Surround playback (v p. 118)
0 The sound is reduced to the level set at “Mute Level” (v p. 157) in the menu.
0 To cancel mute, either adjust the sound volume or press MUTE : again.
Front panel
Display
Appendix
Playback a DVD player/Blu-ray Disc
player
0 The variable range differs according to the input signal and channel level setting.
0 You can also adjust the master volume by turning VOLUME on the main unit.
1
Tips
Rear panel
59
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing an iPod
0 You can use the USB cable provided with the iPod to connect the iPod
ZONE SELECT
MAIN
with the unit’s USB port and enjoy music stored on the iPod.
POWER
0 For information on the iPod models that can be played back with this
SLEEP
ZONE 2
unit, see “Supported iPod/iPhone models” (v p. 49).
iPod/USB
CBL/SAT
DVD
Blu-ray
GAME
AUX1
MEDIA
PLAYER
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
ONLINE
MUSIC
0 See “AirPlay function” (v p. 103) on how to play a music file saved on
an iPhone, iPod touch, iPad or iTunes on this unit via the network.
INTERNET
RADIO
ECO
CH/PAGE df
CH / PAGE
VOLUME
MUTE
INFO
uio p
ENTER
OPTION
OPTION
ENTER
SETUP
BACK
BACK
TUNE
-
TUNE
+
SMART SELECT
1
3
4
PURE
.
MOVIE
2
SOUND MODE
MUSIC
GAME
1/3
89
Front panel
Display
Rear panel
60
Remote
Index
Contents
Connections
Playback
Settings
This can be operated when the “iPod Browse Mode” (v p. 62) is
set to “From iPod”.
0 “iPod Browse Mode settings” (v p. 62)
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 113)
0 “Adjusting the tone (Tone)” (v p. 114)
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 115)
0 “Adjusting the picture quality for your viewing environment (Picture
Mode)” (v p. 116)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 117)
Connect the iPod to the USB port. (v p. 48)
Press iPod/USB to switch the input source to “iPod/
USB”.
“Browse from iPod” is displayed on the display of this unit.
0 Nothing is displayed on the TV screen.
3
Operate iPod itself while seeing the iPod screen to play
back music.
0 “iPod Browse Mode” has two modes, “From iPod” and “On-Screen”. By default,
“From iPod”, where you operate the iPod itself while looking at the iPod screen, is
set.
0 To change to “On-Screen”, where you perform operations while having the iPod
information displayed on the TV screen, see “iPod Browse Mode settings”
(v p. 62).
NOTE
0 Depending on the type of iPod and the software version, some functions may not
operate.
0 Note that Marantz will accept no responsibility whatsoever for any problems
arising with the data on an iPod when using this unit in conjunction with the iPod.
Front panel
Display
Rear panel
Appendix
o Operations accessible through the option
menu
Listening to music on an iPod
1
2
Tips
61
Remote
Index
Contents
Connections
Playback
Settings
iPod Browse Mode settings
Operation buttons
2
3
89
The option menu screen is displayed.
0 Operations available for “On-Screen” and “From iPod” are listed
below.
Playable
files
Active
buttons
From iPod
On-Screen
Music file
P
P
Video file
z
Remote control
unit (This unit)
P
iPod
Switch to the previous page/next page in the list
display
0 The display switches between track title, artist name, and album title etc. each time
the main unit’s STATUS is pressed during playback with “iPod Browse Mode” set
to “On-Screen”.
0 English letters, numbers and certain symbols are displayed. Incompatible
characters are displayed as “.” (period).
P
P
zOnly
4
(Press and hold) Fast-reverse / Fast-forward
0 The actions of the operation buttons may differ.
Use o p to select “On-Screen”, then press ENTER.
iPod Browse Mode
(Press and hold) Fast-reverse/Fast-forward
Skip to previous track / Skip to next track
CH/PAGE d f
The “iPod Browse Mode” screen is displayed.
Skip to previous track / Skip to next track
(Press and hold) Stop
ui
Select “iPod Browse Mode”, then press ENTER.
Function
Playback / Pause
ENTER
Press OPTION when the input source is “iPod/USB”.
Appendix
Playback / Pause
1/3
In this mode, various lists and screens during playback on the iPod are
displayed on the TV screen.
This section describes the steps up to playing back tracks on the iPod in
“On-Screen”.
1
Tips
the sound is played.
Use ui p to select the file to be played, then press
ENTER.
Playback starts.
Front panel
Display
Rear panel
62
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Operations accessible through the option
menu
This can be operated when the “iPod Browse Mode” is set to “OnScreen”. (v p. 62)
0 “iPod Browse Mode settings” (v p. 62)
0 “Performing repeat playback” (v p. 64)
0 “Performing random playback” (v p. 64)
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 113)
0 “Adjusting the tone (Tone)” (v p. 114)
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 115)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 117)
Front panel
Display
Rear panel
63
Remote
Index
Appendix
Contents
Connections
Playback
Settings
1
Press OPTION with “iPod Browse Mode” set to “OnScreen”.
4
Press OPTION with “iPod Browse Mode” set to “OnScreen”.
The option menu screen is displayed.
The option menu screen is displayed.
2
3
Appendix
Performing random playback
Performing repeat playback
1
Tips
2
3
Use ui to select “Repeat”, then press ENTER.
Use o p to select repeat playback mode.
Use ui to select “Random”, then press ENTER.
Use o p to select random playback mode.
Off
(Default) :
Repeat playback mode is canceled.
Off
(Default):
Disable random playback.
One:
A file being played is played
repeatedly.
On:
Randomly play back all tracks in the
current playback folder.
All:
All files in the folder currently being
played are played repeatedly.
4
Press ENTER.
The display returns to the playback screen.
0 During random playback, each time playback of a track is completed, another
track is randomly selected for playback from tracks in the folder. Therefore, it’s
possible that you may hear a track played back more than once during random
playback.
0 “Random” settings are stored for each input source.
“Repeat” settings are stored for each input source.
Front panel
Display
Press ENTER.
The display returns to the playback screen.
Rear panel
64
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing a USB memory device
0 Playing back music or viewing still picture (JPEG) files stored on a USB
ZONE SELECT
MAIN
iPod/USB
memory device.
POWER
0 Only USB memory devices conforming to mass storage class standards
SLEEP
ZONE 2
can be played on this unit.
CBL/SAT
DVD
Blu-ray
GAME
AUX1
MEDIA
PLAYER
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
ONLINE
MUSIC
0 This unit is compatible with USB memory devices in “FAT16” or
“FAT32” format.
0 The audio/video format types and specifications supported by this unit
for playback are as follows.
See “Playback a USB memory device” for details. (v p. 239)
INTERNET
RADIO
0 WMA (Windows Media Audio)
ECO
CH/PAGE df
CH / PAGE
0 MP3 (MPEG-1 Audio Layer-3)
0 MPEG-4 AAC
INFO
ui p
ENTER
0 WAV
VOLUME
MUTE
0 FLAC (Free Lossless Audio Codec)
OPTION
OPTION
0 ALAC (Apple Lossless Audio Codec)
0 AIFF
ENTER
BACK
TUNE
-
TUNE
+
SMART SELECT
1
2
3
SOUND MODE
MUSIC
GAME
0 JPEG
1/3
89
4
PURE
.
MOVIE
0 DSD
SETUP
BACK
Front panel
Display
Rear panel
65
Remote
Index
Contents
Connections
Playback
Settings
Playing files stored on USB memory
devices
1
2
Operation buttons
89
Skip to previous track / Skip to next track
(Press and hold) Fast-reverse / Fast-forward
(Press and hold) Stop
Skip to previous track / Skip to next track
ui
(Press and hold) Fast-reverse / Fast-forward
CH/PAGE d f
[1/9]
Function
Playback / Pause
ENTER
Press iPod/USB to switch the input source to “iPod/
USB”.
Appendix
Playback / Pause
1/3
Connect the USB memory device to the USB port.
(v p. 48)
USB
Tips
Switch to the previous page/next page in the list
display
Folder1
Folder2
Folder3
0 When an MP3 music file includes album art data, the album art can be displayed while
playing the file.
0 This unit plays back picture (JPEG) files in the order in which they are stored in the
folder.
Music1
Music2
Music3
Music4
OPTION
Option
.
NOTE
3
Note that Marantz will accept no responsibility whatsoever for any problems arising with
the data on a USB memory device when using this unit in conjunction with the USB
memory device.
Use ui p to select the file to be played, then press
ENTER.
Playback starts.
Front panel
Display
Rear panel
66
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Operations accessible through the option
menu
0 “Performing repeat playback” (v p. 108)
0 “Performing random playback” (v p. 108)
0 “Searching content with keywords (Text Search)” (v p. 110)
0 “Playing back music and a favorite picture at the same time
(Slideshow)” (v p. 111)
0 “Setting the Slideshow Interval” (v p. 112)
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 113)
0 “Adjusting the tone (Tone)” (v p. 114)
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 115)
0 “Adjusting the picture quality for your viewing environment (Picture
Mode)” (v p. 116)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 117)
Front panel
Display
Rear panel
67
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to music on a Bluetooth device
ZONE SELECT
MAIN
Music files stored on Bluetooth devices such as smartphones, digital
music players, etc. can be enjoyed on this unit by pairing and connecting
this unit with the Bluetooth device.
Communication is possible up to a range of about 32.8 ft/10 m.
POWER
SLEEP
ZONE 2
CBL/SAT
DVD
Blu-ray
GAME
AUX1
MEDIA
PLAYER
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
ONLINE
MUSIC
NOTE
To play back music from a Bluetooth device, the Bluetooth device needs to support
the A2DP profile.
Bluetooth
INTERNET
RADIO
ECO
CH / PAGE
ui
ENTER
VOLUME
MUTE
INFO
OPTION
OPTION
ENTER
SETUP
BACK
BACK
TUNE
-
TUNE
+
SMART SELECT
1
3
4
PURE
.
MOVIE
2
SOUND MODE
MUSIC
GAME
1/3
89
Front panel
Display
Rear panel
68
Remote
Index
Contents
Connections
Playback
Settings
Pairing with a Bluetooth device
2
In order to enjoy music from a Bluetooth device on this unit, the Bluetooth
device must first be paired with this unit.
Once the Bluetooth device has been paired, it does not need to be paired
again.
Appendix
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
At the end of the pairing, the device name appears on the display of
this unit.
0 Connect to the Bluetooth device while “Pairing” is being displayed
on the display of the unit.
Perform the connection with the Bluetooth device close to the unit
(about 3.3 ft/1 m).
Press Bluetooth to switch the input source to
“Bluetooth”.
Bluetooth
0 When connecting a second Bluetooth device, press and hold Bluetooth for
approximately 3 seconds or select “Pairing Mode” from the options menu to pair
the device. (v p. 72)
0 This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th
Bluetooth device is paired, it will be registered in place of the oldest registered
device.
0 When a number appears on the display of this unit, check that it is the same
number as that shown on the screen of the Bluetooth device and then select “Pair”
for both the Bluetooth device and the unit.
0 Enter “0000” when the password is requested on the screen of the Bluetooth
device.
Now Playing
Device
Music
Artist
Album
OPTION
Option
.
1
Tips
When using for the first time, the unit will go into the pairing mode
automatically and “Pairing...” will appear on the display of the unit.
Front panel
Display
Rear panel
69
Remote
Index
Contents
Connections
Playback
Settings
Playing a Bluetooth device
Operation buttons
89
The unit will automatically connect to the most recently used
Bluetooth device.
2
Function
Skip to previous track / Skip to next track
(Press and hold) Fast-reverse / Fast-forward
Playback / Pause
ENTER
Press Bluetooth to switch the input source to
“Bluetooth”.
Appendix
Playback / Pause
1/3
Check the following before you play back music.
0 The Bluetooth function of the Bluetooth device must be turned on
0 Pairing must be completed
1
Tips
(Press and hold) Stop
Skip to previous track / Skip to next track
ui
(Press and hold) Fast-reverse / Fast-forward
Start playing the Bluetooth device.
0 The Bluetooth device can also be operated with the remote
0 When the power of this unit is turned on, the input source will be automatically
switched to “Bluetooth” if a Bluetooth device is connected.
0 When the “IP Control” (v p. 200) setting of this unit is set to “Always On” and a
Bluetooth device is connected with the unit in the standby state, the power of the
unit will be turned on automatically.
0 Press STATUS on this unit during playback to switch the display between Title
name, Artist name, Album name, etc.
0 English letters, numbers and certain symbols are displayed. Incompatible
characters are displayed as “.” (period).
control of this unit.
Front panel
Display
Rear panel
70
Remote
Index
Contents
Connections
Playback
Settings
Tips
NOTE
0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth
device needs to support the AVRCP profile.
0 The remote control of this unit is not guaranteed to work with all Bluetooth devices.
0 Depending on the type of Bluetooth device, this unit outputs audio that is coupled
to the volume setting on the Bluetooth device.
o Operations accessible through the option
menu
0 “Performing repeat playback” (v p. 108)
0 “Performing random playback” (v p. 108)
0 “Pairing with the Pairing Mode” (v p. 72)
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 113)
0 “Adjusting the tone (Tone)” (v p. 114)
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 115)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 117)
Front panel
Display
Rear panel
71
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Pairing with the Pairing Mode
2
3
Press OPTION when the input source is “Bluetooth”.
The option menu screen is displayed.
Use ui to select “Pairing Mode”, then press ENTER.
The device will go into the pairing mode.
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
At the end of the pairing, the device name appears on the display of
this unit.
Front panel
Display
Rear panel
Appendix
0 When a number appears on the display of this unit, check that it is the same
number as that shown on the screen of the Bluetooth device and then select “Pair”
for both the Bluetooth device and the unit.
0 Enter “0000” when the password is requested on the screen of the Bluetooth
device.
Pair a Bluetooth device with this unit.
1
Tips
72
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to FM/AM broadcasts
ZONE SELECT
MAIN
You can use the built-in tuner of this unit to listen to FM broadcasts and
AM broadcasts.
Make sure the FM antenna and AM loop antenna are connected to this
unit first.
POWER
SLEEP
ZONE 2
CBL/SAT
DVD
Blu-ray
GAME
AUX1
MEDIA
PLAYER
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
ONLINE
MUSIC
TUNER
INTERNET
RADIO
ECO
CH/PAGE df
CH / PAGE
VOLUME
MUTE
OPTION
INFO
uio p
ENTER
OPTION
ENTER
SETUP
BACK
BACK
TUNE
-
TUNE
+
TUNE +, –
SMART SELECT
1
3
4
PURE
.
MOVIE
2
SOUND MODE
MUSIC
GAME
Front panel
Display
Rear panel
73
Remote
Index
Contents
Connections
Playback
Settings
Listening to FM/AM broadcasts
1
2
5
Connect the antenna. (“Connecting an FM/AM
antenna” (v p. 50))
6
Press TUNER to switch the input source to “Tuner”.
G TV screen H
STEREO
CH /
Preset
OPTION
FM:
When listening to an FM broadcast.
AM:
When listening to an AM broadcast.
Press TUNE + or TUNE - to select the station you want
listen to.
The modes for receiving FM broadcasts consists of “Auto” mode that automatically
searches available broadcast stations and “Manual” mode that lets you tune in using
buttons to change the frequency. The default setting is “Auto”. You can also use
“Direct Tune” to tune in by entering the frequency directly.
In “Auto” mode, you cannot tune in to radio stations if the reception is not good.
If this is the case, then use the “Manual” mode or “Direct Tune” mode to tune in.
FM 92.10MHz
Tune
Use o p to select “FM” or “AM”, then press ENTER.
AUTO
Now Playing
Option
Operation buttons
.
TUNE+/-
Function
TUNE +, –
Selects the radio station (up/down)
CH/PAGE d f
Selects preset radio stations
.
G Display of this unit H
3
4
Press OPTION.
The option menu screen is displayed.
Use ui to select “FM/AM”, then press ENTER.
This displays the reception band input screen.
Front panel
Display
Appendix
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
TUNER
CH 1
Tips
Rear panel
74
Remote
Index
Contents
Connections
Playback
Settings
o Operations accessible through the option
menu
0 “Changing the tune mode (Tune Mode)” (v p. 76)
You can enter the receiving frequency directly to tune in.
0 “Tuning in to stations and presetting them automatically (Auto Preset
0
0
0
0
0
0
1
Memory)” (v p. 76)
“Presetting the current broadcast station (Preset
Memory)” (v p. 77)
“Specify a name for the preset broadcast station (Preset
Name)” (v p. 78)
“Skipping preset broadcast stations (Preset Skip)” (v p. 79)
“Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 113)
“Adjusting the tone (Tone)” (v p. 114)
“Displaying your desired video during audio playback (Video
Select)” (v p. 115)
“Playing the same music in all zones (All Zone Stereo)” (v p. 117)
Front panel
Display
Rear panel
Appendix
Tuning in by entering the frequency
(Direct Tune)
0 “Tuning in by entering the frequency (Direct Tune)” (v p. 75)
0
Tips
2
3
4
5
75
Press OPTION when the input source is “Tuner”.
The option menu screen is displayed.
Use ui to select “Direct Tune”, then press ENTER.
The screen that lets you enter the frequency is displayed.
Use ui to select the number, then press p.
0 If o is pressed, the immediately preceding input is cancelled.
Repeat step 3 and enter the frequency of the radio
station you want to hear.
When setting is completed, press ENTER.
The preset frequency is tuned in.
Remote
Index
Contents
Connections
Playback
Settings
Changing the tune mode (Tune Mode)
2
3
A maximum of 56 radio stations can be automatically preset.
Press OPTION when the input source is “Tuner”.
1
The option menu screen is displayed.
Use ui to select “Tune Mode”, then press ENTER.
Use o p to select the tune mode, then press ENTER.
2
Auto:
Automatically search for and tune to a receivable radio
station.
3
Manual:
Manually change the frequency one step at a time each
time the button is pressed.
Press OPTION when the input source is “Tuner”.
The option menu screen is displayed.
Use ui to select “Auto Preset Memory”, then press
ENTER.
Press ENTER.
The unit starts to tune in to radio stations automatically and preset
them.
0 When presetting is completed, “Completed” is displayed for about
5 seconds and the option menu screen turns off.
The preset memory is overwritten.
Front panel
Display
Rear panel
Appendix
Tuning in to stations and presetting
them automatically (Auto Preset
Memory)
You can change the mode for tuning into FM and AM broadcasts. If you
cannot tune in automatically with “Auto” mode, change the mode to
“Manual” and tune in manually.
1
Tips
76
Remote
Index
Contents
Connections
Playback
Settings
Presetting the current broadcast
station (Preset Memory)
2
3
4
Appendix
Channel
Default settings
1–8
92.10 / 92.30 / 92.50 / 92.70 / 93.10 / 93.50 / 93.70 / 94.10
MHz
9 – 16
94.30 / 94.50 / 94.70 / 94.90 / 95.10 / 95.30 / 95.50 / 95.70
MHz
17 – 24
Tune in the broadcast station you want to preset.
(“Listening to FM/AM broadcasts” (v p. 74))
98.10 / 98.30 / 98.50 / 98.70 / 98.90 / 99.10 / 100.10 /
100.30 MHz
25 – 32
100.50 / 100.70 / 100.90 / 101.10 / 101.30 / 101.50 /
101.70 / 101.90 MHz
Press OPTION.
33 – 40
103.10 / 103.30 / 103.50 / 103.70 / 103.90 / 104.10 /
104.30 / 104.50 MHz
41 – 48
104.70 / 104.90 / 105.10 / 105.30 / 105.50 / 105.70 /
105.90 / 106.10 MHz
49 – 56
106.30 / 106.50 / 106.70 / 106.90 / 107.10 / 107.30 /
107.50 / 107.90 MHz
Your favorite broadcast stations can be preset so that you can tune them
in easily.
Up to 56 stations can be preset.
1
Tips
The option menu screen is displayed.
Use ui to select “Preset Memory”, then press ENTER.
The list of already preset channels is displayed.
Use ui to select the channel you want to preset, then
press ENTER.
The current broadcast station that is preset.
0 To preset other stations, repeat steps 1 to 4.
Listening to preset stations
1
Use CH/PAGE df to select the desired preset channel.
You can also select preset broadcast stations by pressing TUNER PRESET CH + or
TUNER PRESET CH - on the main unit.
Front panel
Display
Rear panel
77
Remote
Index
Contents
Connections
Playback
Settings
Specify a name for the preset
broadcast station (Preset Name)
5
You can set the name to the preset broadcast station or change it.
Up to eight characters can be input.
1
2
3
4
6
Press OPTION when the input source is “Tuner”.
The option menu screen is displayed.
Tips
Use ui to select a name label, then press ENTER.
The screen that lets you edit the Preset Name is displayed.
0 If you select “Set Defaults”, then the unit returns to displaying the
frequency.
Enter the characters, then press “OK”.
0 For character input, see “Using the keyboard
screen” (v p. 150).
7
Use ui to select “Preset Name”, then press ENTER.
The Preset Name screen is displayed.
Press OPTION to return to the previous screen.
Use o p to select the group of the broadcast station
you want to name.
Use ui to select the broadcast station you want to
name, then press ENTER.
Front panel
Display
Appendix
Rear panel
78
Remote
Index
Contents
Connections
Playback
Settings
A Use o p to select the group of broadcast stations you want
to skip.
B Use ui to select the broadcast station you want to skip.
C Use o p to select “Skip”.
The station you selected is not displayed.
Perform auto preset memory to save all the broadcasting stations that can
be received in the memory. Selecting a broadcast station becomes easier
by skipping unnecessary memories.
2
3
4
Press OPTION when the input source is “Tuner”.
The option menu screen is displayed.
Press OPTION to return to the previous screen.
Use ui to select “Preset Skip”, then press ENTER.
The “Preset Skip” screen is displayed.
n To set the stations you want to skip by groups
A Use o p to select the group of broadcast stations you want to
skip.
B Press u to select “Set No.z – z to Skip”, then press ENTER.
Skip all the broadcast stations that are included in the
selected group “z-z”.
(z is the selected group number.)
Front panel
Display
Rear panel
Appendix
n To set the stations you want to skip by
stations
Skipping preset broadcast stations
(Preset Skip)
1
Tips
79
Remote
Index
Contents
Connections
Playback
Settings
Tips
Cancelling Preset Skip
1
2
3
While the Preset Skip screen is displayed, use o p to
select a group containing a broadcast station to cancel
the skip for.
Use ui to select a broadcast station to cancel the skip
for.
Use o p to select “On”.
The skip is cancelled.
NOTE
Preset skip cannot be cancelled for groups.
Front panel
Display
Rear panel
80
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to Internet Radio
0 Internet Radio refers to radio broadcasts distributed over the Internet.
ZONE SELECT
MAIN
ONLINE
MUSIC
CH/PAGE df
by vTuner radio station.
CBL/SAT
DVD
Blu-ray
GAME
AUX1
MEDIA
PLAYER
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
INTERNET
RADIO
ONLINE
MUSIC
ECO
0 The audio format types and specifications supported by this unit for
playback are as follows.
See “Playing an Internet Radio Station” (v p. 242) for details.
0 WMA (Windows Media Audio)
0 MP3 (MPEG-1 Audio Layer-3)
INTERNET
RADIO
0 MPEG-4 AAC
VOLUME
MUTE
OPTION
INFO
uio p
ENTER
0 The Internet radio station list on this unit the database service provided
SLEEP
ZONE 2
CH / PAGE
Internet Radio stations from around the world can be received.
POWER
OPTION
ENTER
BACK
SETUP
BACK
TUNE
1/3
-
TUNE
+
SMART SELECT
1
3
4
PURE
.
MOVIE
2
SOUND MODE
MUSIC
GAME
Front panel
Display
Rear panel
81
Remote
Index
Contents
Connections
Playback
Settings
Listening to Internet Radio
1
4
Prepare for playback.
0 Check the network environment, then turn on this unit’s power.
(“Connecting to a home network (LAN)” (v p. 52))
2
Press ONLINE MUSIC.
0 You can also press INTERNET RADIO to select the input source
“Internet Radio” directly.
Use uio p to select “Internet Radio”, then press
ENTER.
Online Music
Favorites
Name of country:
Select the various regions.
Displays typical Internet Radio stations.
Search Stations :
Displays all Internet Radio stations that
this unit can tune in to.
Search Podcasts :
Displays Internet Radio stations in the
podcasts that this unit can tune in to.
Recommended
Stations :
Displays recommended Internet Radio
stations.
radiomarantz.com :
Displays Internet Radio stations added to
favorites in vTuner. For instructions on
how to add to favorites in vTuner, see
“Using vTuner to add Internet Radio
stations to favorites” (v p. 84).
Recently Played :
Displays recently played Internet Radio
stations. Up to 20 stations can be stored
in “Recently Played”.
Search by Keyword :
Displays Internet Radio stations
searched by keyword. For character
input, see “Using the keyboard
screen” (v p. 150).
Media Server
Front panel
Display
Rear panel
82
Appendix
Use ui to select the search method for the radio
station that you wish to playback and then press
ENTER.
Internet Radio
.
3
Tips
Remote
Index
Contents
5
Connections
Playback
Settings
Operation buttons
Function
1
Playback / Stop
ENTER
(Press and hold) Stop
CH/PAGE d f
Switch to the previous page/next page in the list
display
Appendix
Playing the last played Internet Radio
station
Use ui p to select the station, then press ENTER.
Playback starts once buffering reaches “100%”.
1/3
Tips
Press INTERNET RADIO.
The source switches to “Internet Radio” and the last played radio
station plays.
o Operations accessible through the option
menu
0 The display switches between track title and radio station name etc. each time the
main unit’s STATUS is pressed.
0 Any characters that cannot be displayed are replaced with “.” (period).
0 “Searching content with keywords (Text Search)” (v p. 110)
0 “Playing back music and a favorite picture at the same time
(Slideshow)” (v p. 111)
0 “Adjusting the volume of each channel to match the input source
NOTE
(Channel Level Adjust)” (v p. 113)
The radio station database service may be suspended or be otherwise unavailable
without notice.
0 “Adjusting the tone (Tone)” (v p. 114)
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 115)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 117)
Front panel
Display
Rear panel
83
Remote
Index
Contents
Connections
Playback
Settings
Using vTuner to add Internet Radio
stations to favorites
4
5
There are many Internet Radio stations in the world, and this unit can tune
into these stations. But finding the radio station you want to hear may be
difficult, because there are too many stations. If this is the case, then
please use vTuner, an Internet Radio station search website specifically
designed for this unit. You can use your PC to search Internet Radio
stations and add them as your favorites. This unit can play radio stations
added to vTuner.
1
6
7
Check the MAC address of this unit.
(“Information” (v p. 196))
Use your PC to access the vTuner website (http://
www.radiomarantz.com).
Display
Rear panel
Select the search criteria (genre, region, language,
etc.) of your choice.
Select the radio station of your choice from the list, and
then click the Add to Favorites icon.
Enter the name of the favorite group, then click “Go”.
A new favorite group that includes the selected radio station is
created.
0 Internet Radio stations added to favorites in vTuner can be played
from “radiomarantz.com” (v p. 82) with this unit.
You can also add a radio station that is not in the vTuner list.
Enter the MAC address of this unit, then click “Go”.
Front panel
Enter your E-mail address and a password of your
choice.
hear.
vTuner.
3
Appendix
0 You can also enter a keyword to search for a station you want to
0 The MAC address is necessary when you create an account for
2
Tips
84
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing back files stored on a PC and NAS
0 This unit can play back music files and playlists (m3u, wpl) stored on a
ZONE SELECT
MAIN
ONLINE
MUSIC
CH/PAGE df
SLEEP
ZONE 2
CBL/SAT
DVD
Blu-ray
GAME
AUX1
MEDIA
PLAYER
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
using technologies shown below.
Windows Media Player Network Sharing Service
0 The audio/video format types and specifications supported by this unit
for playback are as follows.
For details, see “Playing back a file saved on a PC or
NAS” (v p. 241).
0 WMA (Windows Media Audio)
INTERNET
RADIO
ONLINE
MUSIC
0 MP3 (MPEG-1 Audio Layer-3)
ECO
CH / PAGE
0 WAV
VOLUME
MUTE
0 MPEG-4 AAC
INFO
uio p
ENTER
PC and on Network Attached Storage (NAS) that supports DLNA.
0 The network audio playback function of this unit connects to the server
POWER
0 FLAC (Free Lossless Audio Codec)
OPTION
OPTION
0 ALAC (Apple Lossless Audio Codec)
0 AIFF
ENTER
0 DSD
BACK
TUNE
0 JPEG
SETUP
BACK
-
TUNE
+
1/3
89
SMART SELECT
1
3
4
PURE
.
MOVIE
2
SOUND MODE
MUSIC
GAME
Front panel
Display
Rear panel
85
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Applying media sharing settings
Here, we apply the settings to share music files stored on a PC and NAS on the network.
If you are using a Media Server, be sure to apply this setting first.
.
o When using Windows Media Player 11
o When using Windows Media Player 12
(Windows 7 / Windows 8)
1
2
3
4
5
1
2
3
Start up Windows Media Player 12 on the PC.
Select “More streaming options...” in the “Stream”.
Select “Allowed” in the “Marantz SR5009” drop-down
list.
4
Select “Allowed” in the drop-down list for “Media
programs on this PC and remote connections...”.
5
Follow the screen instructions to end the setting.
Start up Windows Media Player 11 on the PC.
Select “Media Sharing” in the “Library”.
Click the “Share my media” check box, select “Marantz
SR5009”, and then click “Allow”.
As you did in step 3, select the icon of the device (other
PCs and mobile devices) you want to use as a media
controller, and then click “Allow”.
Click “OK” to finish.
o Sharing media stored in NAS
Change settings on the NAS to allow this unit and other devices (PCs
and mobile devices) used as media controllers to access the NAS. For
details, see the owner’s manual that came with the NAS.
Front panel
Display
Rear panel
86
Remote
Index
Contents
Connections
Playback
Settings
Playing back files stored on a PC and
NAS
4
5
Use this procedure to play music files, image files or playlists.
2
3
Prepare for playback.
Use iu p to select the file, then press ENTER.
Playback starts once buffering reaches “100%”.
Operation buttons
A Check the network environment, then turn on this unit’s power.
(“Connecting to a home network (LAN)” (v p. 52))
B Prepare the computer. (vComputer’s operating instructions)
89
(Press and hold) Fast-reverse / Fast-forward
(Press and hold) Stop
Skip to previous track / Skip to next track
ui
(Press and hold) Fast-reverse / Fast-forward
Online Music
CH/PAGE d f
Favorites
Skip to previous track / Skip to next track
Playback / Pause
ENTER
Use uio p to select “Media Server”, then press
ENTER.
Function
Playback / Pause
1/3
Press ONLINE MUSIC.
Internet Radio
Switch to the previous page/next page in the list
display
Media Server
Front panel
Display
Rear panel
87
Appendix
Use ui to select the server including the file to be
played, then press ENTER.
.
1
Tips
Remote
Index
Contents
Connections
Playback
Settings
Appendix
o Operations accessible through the option
menu
0 The display switches between track title, artist name, and album title each time the
main unit’s STATUS is pressed.
0 When a WMA (Windows Media Audio), MP3 or MPEG-4 AAC file includes album
art data, the album art can be displayed while the music files are playing.
0 If you use Ver.11 or later of Windows Media Player, the album art for WMA files
can be displayed.
0 WMA Lossless files can be played when using a server supporting transcoding,
such as Windows Media Player (Ver.11 or later).
0 This unit plays back picture (JPEG) files in the order in which they are stored in the
folder.
0 “Performing repeat playback” (v p. 108)
0 “Performing random playback” (v p. 108)
0 “Searching content with keywords (Text Search)” (v p. 110)
0 “Playing back music and a favorite picture at the same time
(Slideshow)” (v p. 111)
0 “Setting the Slideshow Interval” (v p. 112)
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 113)
0 “Adjusting the tone (Tone)” (v p. 114)
NOTE
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 115)
0 When playing back music files with your PC or NAS connected through wireless
LAN, audio may be interrupted depending on your wireless LAN environment. In
this case, connect using a wired LAN.
0 Depending on the size of the still picture (JPEG) file, some time may be required
for the file to be displayed.
0 The order in which the tracks/files are displayed depends on the server
specifications. If the tracks/files are not displayed in alphabetical order due to the
server specifications, searching by the first letter may not work properly.
Front panel
Tips
Display
Rear panel
0 “Adjusting the picture quality for your viewing environment (Picture
Mode)” (v p. 116)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 117)
88
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Viewing photographs on the Flickr site
0 Flickr is an online photo sharing service. You can use this unit to view
ZONE SELECT
MAIN
ONLINE MUSIC
CH/PAGE df
SLEEP
ZONE 2
CBL/SAT
DVD
Blu-ray
GAME
AUX1
MEDIA
PLAYER
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
ONLINE
MUSIC
INTERNET
RADIO
ECO
CH / PAGE
VOLUME
MUTE
INFO
uio p
ENTER
photographs that have been made public by Flickr users. You do not
need an account to use Flickr.
To view photographs that you recorded yourself, you need an account
in order to upload these photographs to the Flickr server.
For details, see the Flickr homepage.
http://www.flickr.com/
0 You can view photographs shared by particular users, or all of the
photographs shared on Flickr.
POWER
OPTION
OPTION
ENTER
SETUP
BACK
BACK
TUNE
-
TUNE
+
SMART SELECT
1
3
4
PURE
.
MOVIE
2
SOUND MODE
MUSIC
GAME
Front panel
Display
Rear panel
89
Remote
Index
Contents
Connections
Playback
Settings
Viewing photographs shared by
particular users
1
4
5
Prepare for playback.
Use ui to select “Add Flickr Contact”, then press
ENTER.
Enter the screen name that you wish to add to
“Contact” (Screen Name: User name you wish to view).
screen” (v p. 150).
6
Press ONLINE MUSIC.
Use uio p to select “Flickr”, then press ENTER.
Online Music
Favorites
7
Internet Radio
After inputting the “Contact”, press “OK”.
The screen name is added to “Contact”, and the screen name you
entered in step 5 is displayed on the top screen of Flickr.
0 If you enter a screen name that does not exist, “The Flickr Contact
you entered could not be found” is displayed. Check and enter
the correct screen name.
Use ui to select the screen name added to “Contact”,
then press ENTER.
.
Media Server
Front panel
Display
Rear panel
Appendix
0 For character input, see “Using the keyboard
0 Check the network environment, then turn on this unit’s power.
(“Connecting to a home network (LAN)” (v p. 52))
2
3
Tips
90
Remote
Index
Contents
8
Connections
Playback
Settings
9
Use ui to select the folder, then press ENTER.
Tips
Appendix
Use ui p to select the photograph, then press ENTER.
The selected photograph is displayed.
Favorites :
Displays the favorite photographs of the
specified user.
Photostream :
Displays a list of shared photographs.
PhotoSets :
Displays the folder (photograph album) list.
Contacts :
Displays the screen name used by the
specified user in Contacts.
ui
Display previous photograph / Display next
photograph
Remove this
Contact :
Deletes a user from Flickr Contact.
CH/PAGE d f
Switch to the previous page/next page in the list
display
Add this Contact :
Adds a user from Flickr Contact.
Front panel
Display
Rear panel
Operation buttons
ENTER
91
Function
Playback
(Press and hold) Stop
Remote
Index
Contents
Connections
Playback
Settings
0 “Setting the Slideshow Interval” (v p. 112)
Use ui to select “All Content”, then press ENTER.
0 “Displaying your desired video during audio playback (Video
Use ui to select the folder, and then press ENTER.
0 “Adjusting the picture quality for your viewing environment (Picture
Select)” (v p. 115)
Mode)” (v p. 116)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 117)
Displays photographs that are popular from the
Interestingness : number of user comments or number of times
they are added as favorites.
Recent :
Displays the most recently added photographs.
Search by text : Search for photographs by keyword.
3
Appendix
o Operations accessible through the option
menu
Viewing all photographs on Flickr
1
2
Tips
Use ui p to select the photograph, then press ENTER.
The selected photograph is displayed.
NOTE
Depending on the file format, some photographs may not be viewable.
Front panel
Display
Rear panel
92
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to Pandora®
ZONE SELECT
MAIN
ONLINE MUSIC
CH/PAGE df
SLEEP
ZONE 2
CBL/SAT
DVD
Blu-ray
GAME
AUX1
MEDIA
PLAYER
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
ONLINE
MUSIC
INTERNET
RADIO
ECO
CH / PAGE
VOLUME
MUTE
INFO
uio p
ENTER
Pandora is an automated music recommendation and Internet Radio
service created by the Music Genome Project.
To listen to Pandora you will need a free Pandora account.
If you do not have a Pandora account, you can create one at
www.pandora.com or from the Pandora smartphone application.
Playback of Pandora in this unit requires the Pandora account to be linked
to the unit. Therefore, access http://www.pandora.com/marantz from your
personal computer and perform the linkage.
POWER
OPTION
OPTION
ENTER
SETUP
BACK
BACK
TUNE
-
TUNE
+
1/3
9
SMART SELECT
1
2
3
SOUND MODE
MUSIC
GAME
4
PURE
.
MOVIE
Front panel
Display
Rear panel
93
Remote
Index
Contents
Connections
Playback
Settings
4
Listening to Pandora®
1
Appendix
If you have a Pandora account, use ui to select “I
have a Pandora account”, then press ENTER.
0 If you do not have a Pandora account, to select “I am to new to
Prepare for playback.
Pandora”. The URL of Pandora and activation code are
displayed. Access the Pandora web page from your PC and
register the displayed activation code and account information.
Then press ENTER.
0 Check the network environment, then turn on this unit’s power.
(“Connecting to a home network (LAN)” (v p. 52))
Press ONLINE MUSIC.
Use uio p to select “Pandora”, then press ENTER.
Pandora
I have a Pandora account
I am to new to Pandora
Online Music
Favorites
Please go to
http://www.pandora.com/marantz and follow
the instructions there to create a new account.
Internet Radio
Your activation code is : zzzzzz
Media Server
BACK
Cancel
Continue
This is an identification code required to
register your purchased product to the
Pandora service.This code is used to
obtain your account.
.
.
2
3
Tips
Front panel
Display
Rear panel
94
Remote
Index
Contents
5
Connections
Playback
Settings
Tips
Input “Email address” and “Password”.
0 For character input, see “Using the keyboard
screen” (v p. 150).
0 Press BACK to cancel the input. When “Cancel input?” is
displayed, select “Yes”, then press ENTER.
After inputting the “Email address” and “Password”,
select “OK”, then press ENTER.
If the “Email address” and “Password” match, the top menu for
Pandora is displayed.
My Station
[1/4]
New Station
Shuffle
Music1 Radio
Sign Out
OPTION
Option
.
6
Front panel
Display
Rear panel
95
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Creating a new station
Operation buttons
You can create up to 100 radio stations.
1
2
Use ui to select “New Station”, then press ENTER.
Input a track or artist name, then press “OK”.
0 For character input, see “Using the keyboard
Playback / Pause
9
Skip to next track
Playback / Pause
(Press and hold) Stop
i
Skip to next track
CH/PAGE d f
Switch to the previous page/next page in the list
display
Use ui to select “Search by Artist” or “Search by
Track”, then press ENTER.
You can search and display a list by track or artist.
4
Use ui, select a file from the list, press ENTER.
New station is created.
Your new station will play music with similar qualities to the artist or track you
entered.
Front panel
Display
Rear panel
96
Appendix
Function
1/3
ENTER
screen” (v p. 150).
3
Tips
Remote
Index
Contents
Connections
Playback
Settings
Tips
Listening to an existing station
1
Use ui and select the radio station that you want to
listen to, then press ENTER.
You can skip up to 6 tracks that are being played back within 1 hour.
Listening to created radio stations at
random
1
Use ui to select “Shuffle”, then press ENTER.
Created radio stations are selected at random, and tracks are
streamed.
Front panel
Display
Rear panel
97
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Giving feedback and managing
stations
You can personalize your stations by providing feedback.
1
Press p while a track is playing.
The Pandora menu screen is displayed.
I like this track :
Press when you like the track that is being
played.
Playback a favorite track.
Display the E (Thumbs up) icon.
I don’t like this
track :
Press when you don’t like the track that is
being played.
Delete that track from the radio station.
Display the D (Thumbs down) icon.
Why is this track
playing? :
Displays the reason why Pandora selected
this track.
Create station :
Creates a station for the track or artist being
played.
Front panel
Display
Rear panel
98
Tips
Appendix
Bookmark this
track :
Bookmarks the artist currently being played.
You can check on a computer or iPhone etc.
For details, see the Pandora web page.
I’m tired of this
track :
Press when you don’t like the track that is being
played.
The track will not be played for 1 month.
Delete this
station :
Press when you want to delete the station that
is being played.
Remote
Index
Contents
Connections
Playback
Settings
Tips
Sign Out
Disassociate this unit from your Pandora account.
1
2
Use ui to select “Sign Out”, then press ENTER.
When the popup menu appears, use o p to select
“Yes”, then press ENTER.
o Operations accessible through the option
menu
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 113)
0 “Adjusting the tone (Tone)” (v p. 114)
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 115)
0 “Adjusting the picture quality for your viewing environment (Picture
Mode)” (v p. 116)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 117)
Front panel
Display
Rear panel
99
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Listening to SiriusXM Internet Radio
ZONE SELECT
MAIN
ONLINE MUSIC
CH/PAGE df
SLEEP
ZONE 2
CBL/SAT
DVD
Blu-ray
GAME
AUX1
MEDIA
PLAYER
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
INTERNET
RADIO
ONLINE
MUSIC
ECO
CH / PAGE
VOLUME
MUTE
INFO
uio p
ENTER
You can access SiriusXM to enjoy access to a wide range of unique
content.
An All Access package lets you listen to SiriusXM on your computer,
smartphone, tablet or Lynx Portable.
For details, see the SiriusXM homepage.
http://www.siriusxm.com
POWER
OPTION
OPTION
ENTER
SETUP
BACK
BACK
TUNE
-
TUNE
+
1/3
SMART SELECT
1
3
SOUND MODE
MUSIC
GAME
4
PURE
.
MOVIE
2
Front panel
Display
Rear panel
100
Remote
Index
Contents
Connections
Playback
Settings
Listening to SiriusXM Internet Radio
3
Over 155 channels commercial-free music, plus play-by-play sports,
exclusive talk, comedy and entertainment.
2
Online Music
Prepare for playback.
Favorites
A Check the network environment, then turn on this unit’s power.
(“Connecting to a home network (LAN)” (v p. 52))
B Access the following website from your PC and obtain a SiriusXM
account.
http://www.siriusxm.com
0 If you already have SiriusXM Internet Radio credentials, select
Sign in in step 4 and enter your SiriusXM username and
password. If you need to setup a SiriusXM account or Internet
Radio credentials, visit www.siriusxm.com/care.
Internet Radio
Media Server
4
5
Press ONLINE MUSIC.
Select “Sign in” and then press ENTER.
Input “Username” and “Password”.
0 For character input, see “Using the keyboard
screen” (v p. 150).
6
Front panel
Display
Rear panel
101
Appendix
Use uio p to select “SiriusXM”, then press ENTER.
.
1
Tips
Select the “Sign in”, then press ENTER.
The top menu of SiriusXM is displayed.
Remote
Index
Contents
7
8
Connections
Playback
Settings
Disassociate this unit from your SiriusXM account.
Use ui to select the file, then press ENTER.
1
2
The selected file is displayed.
1/3
ENTER
CH/PAGE d f
Appendix
Sign Out
Use ui to select the genre, then press ENTER.
Operation buttons
Tips
Function
Playback / Stop
Use ui to select “Sign Out”, then press ENTER.
When the popup menu appears, use o p to select
“Yes”, then press ENTER.
Playback
(Press and hold) Stop
o Operations accessible through the option
menu
Switch to the previous page/next page in the list
display
0 “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 113)
0 “Adjusting the tone (Tone)” (v p. 114)
0 “Displaying your desired video during audio playback (Video
Select)” (v p. 115)
0 “Adjusting the picture quality for your viewing environment (Picture
Mode)” (v p. 116)
0 “Playing the same music in all zones (All Zone Stereo)” (v p. 117)
Front panel
Display
Rear panel
102
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
AirPlay function
Music files stored on your iPhone, iPod touch, iPad or iTunes can be
played on this unit via the network.
PC
This unit
0 X is displayed on the menu screen while AirPlay is being operated.
0 Source input will be switched to “Online Music” when AirPlay playback is started.
0 You can stop AirPlay playback by pressing o or choosing other input source.
0 To see song and artist names together, press STATUS on the main unit.
0 For information about how to use iTunes, also see the Help for iTunes.
0 The screen may differ depending on the OS and software versions.
.
Router
Front panel
Display
Rear panel
103
Remote
Index
Contents
Connections
Playback
Settings
Playing songs from your iPhone, iPod
touch or iPad
1
2
Connect your iPhone, iPod touch or iPad Wi-Fi to the
same network as this unit.
0 For details, see your device’s manual.
2
Install iTunes 10, or later, on a Mac or Windows PC that
is connected to the same network as this unit.
Turn this unit ON.
Set “IP Control” (v p. 200) to “Always On” for this unit.
NOTE
Play the song on your iPhone, iPod touch or iPad.
When “IP Control” is set to “Always On”, the unit consumes more standby
power.
' is displayed on the iPhone, iPod touch or iPad screen.
3
Tap the AirPlay icon '.
Start iTunes and click the AirPlay icon ' to select the
main unit.
.
3
Appendix
Playing iTunes music with this unit
If you update your “iPhone/iPod touch/iPad” to iOS 4.2.1 or later, you can
stream music stored in your “iPhone/iPod touch/iPad” directly to this unit.
1
Tips
4
AirPlay
The music will stream to this unit.
.
AirDrop
Choose a song and click play in iTunes.
4
Select the speaker (devices) you want to use.
Front panel
Display
Rear panel
104
Remote
Index
Contents
Connections
Playback
Settings
Selecting multiple speakers (devices)
With this unit’s remote control unit, you can perform iTunes song play,
pause, and auto search (cue) operations.
Click the AirPlay icon ' and select “Multiple”.
1
2
3
Check the speakers you want to use.
NOTE
In playback using the AirPlay function, the sound is output at the iPhone, iPod touch,
iPad or iTunes volume setting level.
You should turn down the iPhone, iPod touch, iPad or iTunes volume prior to
playback and then adjust it to a suitable level.
Front panel
Display
Rear panel
Appendix
Perform iTunes playback operations
with the remote control unit of this unit
It is possible to play iTunes songs on your home’s AirPlay compatible
speakers (devices) other than those of this unit.
1
2
Tips
105
Select the “Edit” - “Preferences...” in the iTunes menu.
Select “Devices” in the iTunes setting window.
Check “Allow iTunes audio control from remote
speakers”, and then click “OK”.
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Spotify Connect function
Spotify is the world’s most popular streaming service. If you subscribe to
Spotify Premium, you can control your new speaker with your phone or
tablet. Because Spotify is built-in to your speaker, you can still take calls or
use other apps - the music never stops.
To try Spotify Premium free for 30 days, or learn more about Connect,
please go to www.spotify.com/connect
Playing Spotify music with this unit
Download the “Spotify App” onto your Android or iOS device beforehand.
To play a Spotify track in this unit, you need to register in the Spotify
premium account first.
.
1
Spotify server
Launch the Spotify App.
Play back the Spotify track.
Tap the F icon to select the unit.
0:13
Control
4:44
.
Audio streaming/control
2
3
4
Connect the Wi-Fi settings of the iOS or Android device
in the same network as this unit.
The music will stream to this unit.
This unit
Spotify App
Front panel
Display
Rear panel
106
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Convenience functions
ZONE SELECT
MAIN
ONLINE MUSIC
SLEEP
ZONE 2
MAIN
This section explains how to use convenient functions that can be used for
each input source.
POWER
CBL/SAT
DVD
Blu-ray
GAME
AUX1
MEDIA
PLAYER
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
INTERNET
RADIO
ONLINE
MUSIC
ECO
CH / PAGE
VOLUME
MUTE
INFO
uio p
ENTER
OPTION
OPTION
ENTER
BACK
TUNE
SETUP
-
TUNE
+
SMART SELECT
1
3
4
PURE
.
MOVIE
2
SOUND MODE
MUSIC
GAME
Front panel
Display
Rear panel
107
Remote
Index
Contents
Connections
Playback
Settings
Performing repeat playback
Tips
Performing random playback
n Supported input sources :
USB / Media Server / Bluetooth
n Supported input sources :
USB / Media Server / Bluetooth
1
1
2
3
4
Appendix
While content is playing, press OPTION.
The option menu screen is displayed.
2
3
Use ui to select “Repeat”, then press ENTER.
Use o p to select repeat playback mode.
While content is playing, press OPTION.
The option menu screen is displayed.
Use ui to select “Random”, then press ENTER.
Use o p to select random playback mode.
Off
(Default):
Repeat playback mode is canceled.
Off
(Default):
Disable random playback.
One:
A file being played is played
repeatedly.
On:
Randomly play back all tracks in the
current playback folder.
All:
All files in the folder currently being
played are played repeatedly.
4
Press ENTER.
The display returns to the playback screen.
0 During random playback, each time playback of a track is completed, another
track is randomly selected for playback from tracks in the folder. Therefore, it’s
possible that you may hear a track played back more than once during random
playback.
0 This cannot be set up if the Bluetooth device does not support the random setting
under the AVRCP profile.
0 “Random” settings are stored for each input source.
0 This cannot be set up if the Bluetooth device does not support the repeat setting
under the AVRCP profile.
0 “Repeat” settings are stored for each input source.
Front panel
Display
Rear panel
Press ENTER.
The display returns to the playback screen.
108
Remote
Index
Contents
Connections
Playback
Settings
Registering to Favorites
n Supported input sources : Internet Radio /
Media Server / Pandora / SiriusXM
1
2
While content is playing, press OPTION.
Press ONLINE MUSIC.
Use uio p to select “Favorites”, then press ENTER.
The option menu screen is displayed.
Online Music
Use ui to select “Save to Favorites”, then press
ENTER.
Favorites
“Favorite added” is displayed, and the current content is added to
favorites.
0 The display returns to the playback screen when the procedure is
completed.
Internet Radio
Media Server
.
2
Appendix
Playing back content added to the
“Save to Favorites”
You can register a total of 100 favorites.
1
Tips
3
Use ui to select the content you want to play, then
press ENTER.
Playback starts.
Front panel
Display
Rear panel
109
Remote
Index
Contents
Connections
Playback
Settings
Deleting content added to favorites
1
2
3
Appendix
Searching content with keywords (Text
Search)
Press ONLINE MUSIC.
Use uio p to select “Favorites”, then press ENTER.
n Supported input sources :
USB / Internet Radio / Media Server
Use ui to select the content you want to delete from
favorites, then press OPTION.
1
The option menu screen is displayed.
4
Tips
2
Use ui to select “Remove from Favorites”, then press
ENTER.
“Favorite removed” is displayed, and the selected content is deleted
from favorites.
0 The screen returns to the previous screen when the delete
process is complete.
3
While the content is playing, press OPTION.
The option menu screen is displayed.
Use ui to select “Text Search”, then press ENTER.
The keyboard input screen is displayed.
Enter the first character of the Internet Radio station or
file you want to search for, and then press “OK”.
0 For character input, see “Using the keyboard
screen” (v p. 150).
4
Use ui to select the content you want to play, then
press ENTER.
Playback starts.
“Text Search” searches for Internet Radio stations or files that start with the entered
first character from the displayed list.
NOTE
Text Search may not work for some lists.
Front panel
Display
Rear panel
110
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing back music and a favorite picture at the same time (Slideshow)
n Supported input sources : USB
1
n Supported input sources :
Internet Radio / Media Server
Play back a still picture.
1
0 Playing back still pictures stored on USB memory devices.
(v p. 66)
2
3
4
2
Press OPTION.
The option menu screen is displayed.
3
Use ui to select “Slideshow”, then press ENTER.
The option menu disappears, and the picture you were viewing is
shown on the screen.
Display
0 Play back still pictures stored on Media Server. (v p. 85)
0 Play back still pictures stored on Flickr. (v p. 89)
Play back a music file. (v p. 66)
Front panel
Play back a still picture.
Rear panel
4
111
Play back a music file of Media Server or Internet Radio
station. (v p. 81, 85)
Press OPTION.
The option menu screen is displayed.
Use ui to select “Slideshow”, then press ENTER.
The option menu disappears, and the picture you were viewing is
shown on the screen.
Remote
Index
Contents
Connections
Playback
Settings
Setting the Slideshow Interval
Tips
The “Slideshow Interval” settings are reflected for all input sources.
Set the playback interval when playing back a slideshow of still picture
(JPEG) files stored on a USB memory device or media server, or on the
Flickr website.
n Supported input sources :
USB / Media Server / Flickr
1
2
3
While the list is displayed, press OPTION.
The option menu screen is displayed.
Use ui to select “Slideshow Interval”, then press
ENTER.
Use o p to set the display time.
Off:
The slide show is not played back.
5s - 60s
Set the time for displaying a single picture when
(Default: 5s): playing back images in the slide show.
4
Press ENTER.
Front panel
Display
Rear panel
Appendix
112
Remote
Index
Contents
Connections
Playback
Settings
Adjusting the volume of each channel
to match the input source (Channel
Level Adjust)
2
Press OPTION.
The option menu screen is displayed.
Use ui to select “Channel Level Adjust”, then press
ENTER.
The channel level adjust screen is displayed.
3
4
Use ui to select the channel that you wish to adjust.
Use o p to adjust the volume.
–12.0 dB – +12.0 dB (Default : 0 dB)
Front panel
Display
Rear panel
Appendix
0 Select “Reset” and press ENTER if you want to restore the adjustment values of
the various channels to “0 dB” (default).
0 Headphone volume can be adjusted when a headphone is connected.
0 “Channel Level Adjust” settings are stored for each input source.
0 You can only set this for speakers that output audio. In addition, you cannot set
this when in the menu “HDMI Audio Out” (v p. 165) is set to “TV”.
The volume of each channel can be changed while listening to music. You
can set this for each input source.
1
Tips
113
Remote
Index
Contents
Connections
Playback
Settings
Adjusting the tone (Tone)
4
Adjusts the tonal quality of the sound.
1
2
3
Press OPTION.
The option menu screen is displayed.
5
Use ui to select “Tone”, then press ENTER.
The tone control screen is displayed.
Tips
Appendix
Select “On” in step 3 and press i to select the sound
range to be adjusted.
Bass:
Adjust bass.
Treble:
Adjust treble.
Use o p to adjust the tone, then press ENTER.
-6 dB – +6 dB (Default : 0 dB)
Use o p to set the tone control function to on/off.
On:
Allow tone adjustment (bass, treble).
Off
(Default):
Playback without tone adjustment.
Front panel
Display
Rear panel
0
0
0
0
114
“Tone” settings are stored for each input source.
This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
This item cannot be set when “Dynamic EQ” (v p. 159) is set to “On”.
You cannot set this when no audio signal is input or in the menu “HDMI Audio
Out” (v p. 165) is set to “TV”.
Remote
Index
Contents
Connections
Playback
Settings
Displaying your desired video during
audio playback (Video Select)
4
5
This unit can display video from a different source on TV during audio
playback. You can set this for each input source.
n Supported input sources :
iPod/USB / CDz / Tuner / Online Music /
Bluetooth
Tips
If you selected “On” in step 3, press i and select
“Source”.
Use o p to select the input source for video you want
to play back, then press ENTER.
“Video Select” settings are stored for each input source.
z This cannot be set when any of the HDMI, component video or video
connectors are assigned.
1
2
3
Press OPTION during audio playback.
The option menu screen is displayed.
Use ui to select “Video Select”, then press ENTER.
Use o p to select the Video Select mode.
Off
(Default):
Disable Video Select mode.
On:
Enable Video Select mode.
Front panel
Display
Rear panel
115
Appendix
Remote
Index
Contents
Connections
Playback
Settings
Adjusting the picture quality for your
viewing environment (Picture Mode)
3
n Supported input sources :
CBL/SAT / DVD / Blu-ray / Game / AUX1 /
AUX2 / Media Player / iPod/USB /
Online Music / CDz / TV Audioz
z You can set the picture mode when an HDMI, component video or video
connector is assigned.
1
2
Tips
Use o p to select picture mode.
Off:
No picture quality adjustment is done with this unit.
Standard:
The standard mode suited for most living room
viewing environments.
Movie:
A mode suited for watching movies in a dark room
such as a theater room.
Vivid:
A mode that makes graphic images for games, etc.
brighter and more vivid.
Streaming: A mode suited for low bit rate video sources.
Press OPTION during video playback.
The option menu screen is displayed.
Use ui to select “Picture Mode”, then press ENTER.
4
ISF Day:
A mode suited for watching movies in a bright room
during the day.
ISF Night:
A mode suited for watching movies in a dark room at
night.
Custom:
Adjusts the picture quality manually.
Press ENTER.
“Picture Mode” settings are stored for each input source.
Front panel
Display
Rear panel
Appendix
116
Remote
Index
Contents
Connections
Playback
Settings
1
You can play back the music being played back in MAIN ZONE
simultaneously in ZONE2 (another room).
It is useful when you want to enjoy the same music at the same time in
multiple rooms during home party or when you want to play back the same
BGM in the entire house.
2
3
Appendix
o Stopping the All Zone Stereo mode
Playing the same music in all zones (All
Zone Stereo)
1
Tips
During playback in All Zone Stereo mode, press
OPTION.
The option menu screen is displayed.
2
3
Press OPTION.
Use ui to select “All Zone Stereo”, then press ENTER.
Select “Stop”, then press ENTER.
The option menu screen is displayed.
0 The All Zone Stereo mode is canceled even when the power supply of the MAIN
ZONE is turned off.
0 In the All Zone Stereo mode, only the “Multi Ch Stereo” and “Stereo” sound modes
can be selected.
0 When “HDMI Audio Out” (v p. 165) is set to “TV”, the All Zone Stereo mode is
not available.
0 When “Input Mode” (v p. 177) is set to other than “7.1CH IN”, the All Zone
Stereo mode is available.
Use ui to select “All Zone Stereo”, then press ENTER.
Select “Start”, then press ENTER.
The input source for ZONE2 is switched to the same input source as
for MAIN ZONE, and playback starts in the All Zone Stereo mode.
Front panel
Display
Rear panel
117
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Selecting a sound mode
ZONE SELECT
MAIN
This unit allows you to enjoy various kinds of surround and stereo
playback modes.
Disc formats such as Blu-ray Disc and DVD, as well as being supported by
digital broadcasting, and even by streaming movies and music from
internet-based subscription services.
This unit supports playback of almost all of these multi-channel audio
formats. It also supports surround playback of audio formats other than
multi-channel audio such as 2-channel stereo audio.
POWER
SLEEP
ZONE 2
CBL/SAT
DVD
Blu-ray
GAME
AUX1
MEDIA
PLAYER
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
ONLINE
MUSIC
INTERNET
RADIO
For audio formats recorded on a disc, see the disc jacket or label.
ECO
CH / PAGE
VOLUME
MUTE
INFO
OPTION
ENTER
BACK
SETUP
ui
TUNE
-
TUNE
+
SMART SELECT
1
MOVIE
3
4
PURE
PURE
GAME
.
MOVIE
MUSIC
2
SOUND MODE
MUSIC
GAME
Front panel
Display
Rear panel
118
Remote
Index
Contents
Connections
Playback
Settings
0 Press MOVIE, MUSIC or GAME to display a list of the sound modes
that can be selected. Each time you press MOVIE, MUSIC or GAME,
the sound mode changes.
0 While the list is displayed, you can also use ui to select a sound
mode.
0 Try out various sound modes and enjoy sound mode in your favorite
mode.
GExampleH When MOVIE is pressed
Press MOVIE, MUSIC or GAME to select a sound mode.
MOVIE :
Switches to the sound mode suitable for enjoying movies
and TV programs.
MUSIC : Switches to the sound mode suitable for enjoying music.
GAME : Switches to the sound mode suitable for enjoying games.
MOVIE SOUND
0 The MOVIE, MUSIC, or GAME button memorizes the last sound mode selected for
its button. Pressing MOVIE, MUSIC, or GAME recalls the same sound mode as
the one selected at the previous playback.
0 If the content played back does not support the previously selected sound mode,
the most appropriate sound mode for the content is automatically selected.
0 You can also press SOUND MODE on the main unit to switch the sound mode.
Stereo
Dolby PLIIx Cinema
DTS Neo:6 Cinema
Multi Ch Stereo
Virtual
.
Front panel
Display
Appendix
o Switching the sound mode
Selecting a sound mode
1
Tips
Rear panel
119
Remote
Index
Contents
Connections
Playback
Settings
Appendix
Pure Direct playback
Direct playback
This mode is for playback with higher sound quality than in Direct playback
mode.
This mode turns off the main unit display and analog video circuit. Doing
so suppresses noise sources that affect sound quality.
Sound recorded in source is played as is.
1
Tips
Press PURE to select “Direct”.
Direct playback begins.
1
This can also be set by pressing PURE DIRECT on the main unit.
Press PURE to select “Pure Direct”.
The display goes dark, and Pure Direct playback begins.
The PURE DIRECT indicator lights.
In Direct and Pure Direct sound modes, the following items cannot be adjusted.
0 Tone (v p. 114)
0 M-DAX (v p. 156)
0 MultEQ® XT (v p. 158)
0 Dynamic EQ (v p. 159)
0 Dynamic Volume (v p. 160)
0 Graphic EQ (v p. 160)
0 This can also be set by pressing PURE DIRECT on the main unit.
NOTE
0 Video signals are only output when HDMI signals are played in the Pure Direct
mode.
0 When the Pure Direct mode has been selected, the display turns off after about 5
seconds.
Front panel
Display
Rear panel
120
Remote
Index
Contents
Connections
Playback
Settings
Tips
Auto surround playback
This mode detects the type of input digital signal, and automatically
selects the corresponding mode for playback.
Perform stereo playback when the input signal is PCM. When the input
signal is Dolby Digital or DTS, the music is played back according to the
respective channel number.
1
Press PURE to select “Auto”.
Auto surround playback begins.
This can also be set by pressing PURE DIRECT on the main unit.
Front panel
Display
Rear panel
121
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
o Description of sound mode types
Dolby sound mode
Sound mode type
Dolby
PLgxz1
Description
This mode can be selected when the Dolby PLgx decoder is used to play back 2-channel sources in 6.1/7.1-channel
surround sound including the surround back channel(s).
By adding the surround back channel(s), a more enveloping surround environment is produced, compared to Dolby Pro
Logic g. There are three playback modes: “Cinema” mode that is optimized for movie playback, “Music” mode that is
optimized for music playback, and “Game” mode that is optimized for game play.
Dolby PLg
This mode can be selected when the Dolby PLg decoder is used to play back 2-channel sources in 5.1-channel surround
sound with an enveloping surround sound experience.
Dolby PLgzz2
This mode can be selected when the Dolby PLgz decoder is used to play back 2-channel sources in 7.1-channel surround
sound with added front height channels.
By adding front height channels, the front soundstage becomes dramatically taller, simulating the effect of listening in a
large movie theater or concert hall.
Dolby Digital
This mode can be selected when playing sources recorded in Dolby Digital.
Dolby Digital EXz1
Using the Dolby Digital EX decoder, this mode plays Dolby Digital sources in 6.1/7.1-channel surround sound with added
surround back channel(s).
By adding surround back speaker(s), sounds can be heard coming at you from behind and not just from the sides.
Dolby TrueHD
This mode can be selected when playing sources recorded in Dolby TrueHD.
Dolby Digital Plus
This mode can be selected when playing sources recorded in Dolby Digital Plus.
z1 This can be selected when “Speaker Config.” - “Surr. Back” (v p. 190) is not set to “None”.
z2 This can be selected when “Speaker Config.” - “Front Height” (v p. 190) is not set to “None”.
Front panel
Display
Rear panel
122
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
DTS sound mode
Sound mode type
DTS Neo:6
Description
This mode can be selected when the DTS Neo:6 decoder is used to play back 2-channel sources in 6.1/7.1-channel
surround sound including the surround back channel(s).
There are two playback modes: “Cinema” mode that is optimized for movie playback, “Music” mode that is optimized for
music playback.
DTS Surround
This mode can be selected when playing sources recorded in DTS.
DTS ES Dscrt6.1z
This mode is suitable for playing discs recorded in DTS-ES.
The surround back channel added using the discrete method is played as an independent channel.
Since all channels are independent, the 360-degree spacial expressiveness and sound localization are enhanced.
DTS ES Mtrx6.1z
This mode is suitable for playing discs recorded in DTS-ES.
The surround back channel added to the surround-left and surround-right channels by a matrix encoder at software
recording time is decoded by this unit’s matrix decoder and played from each channel (surround left, surround right,
surround back).
DTS 96/24
This mode can be selected when playing sources recorded in DTS 96/24.
DTS-HD
This mode can be selected when playing sources recorded in DTS-HD.
DTS Express
This mode can be selected when playing sources recorded in DTS Express.
z This can be selected when “Speaker Config.” - “Surr. Back” (v p. 190) is not set to “None”.
PCM multi-channel sound mode
Sound mode type
Multi Ch In
Front panel
Description
This mode can be selected when playing multi-channel PCM/DSD sources.
Display
Rear panel
123
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Original sound mode
Sound mode type
Description
Multi Ch Stereo
This mode is for enjoying stereo sound from all speakers.
Stereo audio (2-channel) sources are played back via the front (L/R) speakers, the surround speakers and surround back
speakers (if connected).
Virtual
This mode lets you experience an expansive surround sound effect when playing back through just the front (L/R)
speakers only, and when listening with stereo headphones.
Auto sound mode
Sound mode type
Auto
Front panel
Description
In this mode, the type of digital signal input, such as Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DolbyDigital EX,
DTS, DTS-HD, DTS-ES, PCM (multi-channel) is detected, and the playback mode switches automatically to the
corresponding mode.
If the input signal is analog or PCM (2-channel), stereo playback is used. For Dolby Digital or DTS, the music is played
back according to the respective channel number.
Display
Rear panel
124
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Stereo sound mode
Sound mode type
Stereo
Description
This mode plays 2-channel stereo audio with no additional surround sound processing.
0 Sound is output from the front left and right speakers, and subwoofer if connected.
0 When multi-channel signals are inputted, they are mixed down to 2-channel audio and are played back with no
additional surround sound processing.
Direct sound mode
Sound mode type
Description
Direct
This mode plays back audio as recorded in the source.
Pure Direct
This mode plays back an even higher quality sound than the “Direct” mode.
The following circuits are stopped in order to further improve sound quality.
0 Display indicator circuit of the main body (display will go off.)
0 The analog video input/output switcher and processor is disabled.
Front panel
Display
Rear panel
125
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Sound mode that can be selected for each input signal
0 The following sound modes can be selected using the MOVIE, MUSIC and GAME buttons.
0 Adjust the sound field effect with the menu “Surround Parameter” (v p. 152) to enjoy surround sound the way you like it.
Input signal
MOVIE button
MUSIC button
GAME button
Stereo
Sound mode
S
S
S
Dolby PLg/gx Cinema z2
S
Dolby PLg/gx Music z2
Dolby PLg/gx Game
2-channel
z1
Dolby PLg/gz
S
z2
S
z2
S
DTS Neo:6 Cinema z2
S
S
S
DTS Neo:6 Music z2
S
Multi Ch Stereo
S
S
S
Virtual
S
S
S
z1 2-channel also includes analog input.
z2 This mode plays back 2-channel sources in 5.1 or 7.1-channel playback. It cannot be selected when headphones are used or when the speaker configuration is front
speakers only.
Front panel
Display
Rear panel
126
Remote
Index
Contents
Connections
Input signal
Multi-channel z3
Dolby Digital
Playback
Sound mode
Settings
MUSIC button
S
GAME button
S
Dolby Digital
S
S
S
Dolby Digital EX
S
S
S
Dolby Digital + PLgx Cinema
S
S
Dolby Digital + PLgz
S
S
S
Dolby TrueHD
S
S
S
Dolby TrueHD + EX
S
S
S
Dolby TrueHD + PLgx Cinema
S
Dolby TrueHD + PLgx Music
Dolby Digital Plus
S
Dolby TrueHD + PLgz
S
S
S
Dolby Digital Plus
S
S
S
Dolby Digital Plus + EX
S
S
S
Dolby Digital Plus + PLgx Cinema
S
Dolby Digital Plus + PLgx Music
DTS
Appendix
MOVIE button
S
Stereo
Dolby Digital + PLgx Music
Dolby TrueHD
Tips
S
Dolby Digital Plus + PLgz
S
S
S
DTS Surround
S
S
S
DTS ES Dscrt 6.1
S
S
S
DTS ES Mtrx 6.1
S
S
S
DTS 96/24
S
S
S
DTS + PLgx Cinema
S
DTS + PLgx Music
S
DTS + PLgz
S
S
S
DTS + Neo:6
S
S
S
z3 The sound mode that can be selected differs depending on the audio format of the input signal and the number of channels. For details, see “Types of input signals, and
corresponding sound modes” (v p. 247).
Front panel
Display
Rear panel
127
Remote
Index
Contents
Connections
Input signal
Playback
Sound mode
PCM multi-channel
Appendix
MUSIC button
S
GAME button
S
DTS-HD Mstr
S
S
S
DTS Express
S
S
S
DTS-HD + PLgx Cinema
S
DTS-HD + PLgx Music
S
S
DTS-HD + PLgz
S
S
S
DTS-HD + Neo:6
S
S
Multi Ch In
S
S
S
Multi Ch In 7.1
S
S
S
Multi In + Dolby EX
S
S
S
Multi In + PLgx Cinema
S
Multi In + PLgx Music
Multi-channel z3
Tips
MOVIE button
S
DTS-HD Hi Res
DTS-HD/
DTS Express
Settings
S
Multi In + PLgz
S
S
S
Multi Ch Stereo
S
S
S
Virtual
S
S
S
z3 The sound mode that can be selected differs depending on the audio format of the input signal and the number of channels. For details, see “Types of input signals, and
corresponding sound modes” (v p. 247).
Front panel
Display
Rear panel
128
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Views on the display
q
.
w
A Shows a decoder to be used.
0 In the case of the Dolby Digital Plus decoder, “Y” is
displayed.
B Shows a decoder that creates sound output.
0 “+ PLgz” indicates that the PLgz decoder is being used, and that
front height channel sound is being created.
Front panel
Display
Rear panel
129
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
HDMI control function
A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with
another device via the HDMI cable connection.
Setting procedure
1
2
3
5
Enable the HDMI control function of this unit.
Set “HDMI Control” (v p. 166) to “On”.
Turn the power on for all the devices connected by
HDMI cable.
6
Set the HDMI control function for all devices connected
by HDMI cable.
When you turn the TV’s power to standby, check that
the power of this unit also goes to standby.
NOTE
0 Please consult the operating instructions for the connected
Some functions may not operate depending on the connected TV or player. Check
the owner’s manual of each device for details beforehand.
devices to check the settings.
0 Carry out steps 2 and 3 should any of the devices be unplugged.
4
Switch the input source of this unit to check that video
from the player connected by HDMI is played back
correctly.
Switch the television input to the HDMI input connected
to this unit.
Front panel
Display
Rear panel
130
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Sleep timer function
ZONE SELECT
MAIN
ZONE2
MAIN
You can have the power automatically switched to standby once a set time
has elapsed. This is convenient for viewing and listening while going to
sleep. The sleep timer function can be set for each zone.
POWER
ZONE 2
SLEEP
CBL/SAT
DVD
Blu-ray
GAME
AUX1
MEDIA
PLAYER
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
ONLINE
MUSIC
SLEEP
INTERNET
RADIO
ECO
CH / PAGE
VOLUME
MUTE
INFO
OPTION
ENTER
BACK
TUNE
SETUP
-
TUNE
+
SMART SELECT
1
3
4
PURE
.
MOVIE
2
SOUND MODE
MUSIC
GAME
Front panel
Display
Rear panel
131
Remote
Index
Contents
Connections
Playback
Settings
Press SLEEP when the sleep timer is in operation.
The remaining time appears on the display.
Press MAIN or ZONE2 to select the operating zone with
the remote control.
o To cancel the sleep timer
The button for the selected zone is lit.
2
Appendix
o Checking the remaining time
Using the sleep timer
1
Tips
Press SLEEP to select “Off”.
The sleep timer indicator on the display turns off.
Press SLEEP and display the time you want to set.
0 The sleep timer indicator lights up on the display and the sleep
timer starts.
The sleep timer setting is canceled when the unit switches to standby mode.
0 You can set the sleep timer in the range from 10 to 120 minutes in
NOTE
steps of 10 minutes.
The sleep timer function cannot turn off the power of devices connected to this unit.
To turn off the power of those connected devices, set up sleep timers on the
connected devices themselves.
Front panel
Display
Rear panel
132
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Smart select function
ZONE SELECT
MAIN
Settings such as the input source, volume level and sound mode can be
registered to the SMART SELECT 1-4 buttons.
You can simply press one of the registered SMART SELECT buttons in
subsequent playbacks to switch to the group of saved settings in a batch.
By saving frequently used settings at the SMART SELECT 1 – 4 buttons,
you will always be able to easily call up the same playback environment.
The Smart Select function can be memorized for each zone.
POWER
SLEEP
ZONE 2
CBL/SAT
DVD
Blu-ray
GAME
AUX1
MEDIA
PLAYER
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
ONLINE
MUSIC
The SMART SELECT button on this unit can only be used to operate the MAIN
ZONE.
INTERNET
RADIO
ECO
CH / PAGE
VOLUME
MUTE
INFO
OPTION
ENTER
BACK
TUNE
SETUP
-
TUNE
+
SMART SELECT
1
3
4
PURE
SMART SELECT
1–4
.
MOVIE
2
SOUND MODE
MUSIC
GAME
Front panel
Display
Rear panel
133
Remote
Index
Contents
Connections
Playback
Settings
Tips
Calling up the settings
1
2
Press MAIN or ZONE2 to select the operating zone with
the remote control.
The button for the selected zone is lit.
Press SMART SELECT.
The Smart Select settings registered to the button you pressed are
called up.
0 The default settings for the input source and volume are as shown
below.
GMAIN ZONEH
Button
Input source
Volume
SMART SELECT 1
CBL/SAT
40
SMART SELECT 2
Blu-ray
40
SMART SELECT 3
Media Player
40
SMART SELECT 4
Online Music
40
GZONE2H
Button
Input source
Volume
SMART SELECT 1
CBL/SAT
40
SMART SELECT 2
Blu-ray
40
SMART SELECT 3
–
–
SMART SELECT 4
Online Music
40
Front panel
Display
Rear panel
134
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Changing the settings
1
2
Tips
Press MAIN or ZONE2 to select the operating zone with
the remote control.
The button for the selected zone is lit.
Set the items below to the settings you want to
register.
3
The following settings from A to H can be memorized for MAIN
ZONE, and settings A and B can be memorized for ZONE2.
A Input source (v p. 58)
B Volume (v p. 59)
C Sound mode (v p. 118)
D Audyssey (Audyssey MultEQ® XT, Audyssey Dynamic EQ®,
Audyssey Dynamic Volume®) (v p. 158 - 160)
E “M-DAX” (v p. 156)
F “Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 113)
G “Displaying your desired video during audio playback (Video
Select)” (v p. 115)
H “Adjusting the picture quality for your viewing environment
(Picture Mode)” (v p. 116)
Press and hold the desired SMART SELECT until
“Smartz Memory” or “Z2 Smartz Memory” appear on
the display.
The current settings will be memorized.
z is displayed the number for the SMART SELECT button you
pressed.
o Changing the Smart Select Name
The MAIN ZONE Smart Select name displayed on the TV screen or
display of this unit can be changed to a different name.
For the name change method, see Smart Select Names (v p. 206).
Press and hold SMART SELECT while a radio station is being received or a
track is being played back with any of the following sources, the current radio
station or track is memorized.
0 Tuner / Internet Radio / Media Server / Pandora / SiriusXM / Favorites /
iPod/USB
Front panel
Display
Rear panel
Appendix
135
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Web control function
You can control this unit from a web control screen on a web browser.
.
Controlling the unit from a web control
1
PC
This unit
2
Router
Switch the “IP Control” setting to “Always On”.
(v p. 200)
Check the IP address of this unit with
“Information” (v p. 196).
Network/Information
Friendly name
DHCP
Connection
IP Address
MAC Address
Marantz SR5009
On
Wired (Ethernet)
192.168.100.19
0005cd-000000
Checking the IP address.
Displays the current network settings of the AVR
.
Tablet
3
0 This unit and the PC or tablet need to be connected correctly to the network in
order to use the web control function. (“Connecting to a home network
(LAN)” (v p. 52))
0 Depending on the settings of your security-related software, you may not be able
to access this unit from your PC. If this is the case, then change the settings of the
security-related software.
Front panel
Display
Rear panel
136
Start up the web browser.
Remote
Index
Contents
Playback
Settings
5
Enter the IP address of this unit in browser’s address
box.
For example, if the IP address of this unit is “192.168.100.19”, enter
“http://192.168.100.19”.
Tips
When the top menu is displayed, click on the menu
item you want to operate.
SR5009
Setup Menu
MAIN ZONE
CBL/SAT
Audio
http://192.168.100.19
File
Edit View
Appendix
Video
Favorites Tools Help
ZONE2
CBL/SAT
Inputs
.
Speakers
Network
General
Save
SR5009
Load
.
4
Connections
0 You can use the “Save” and “Load” functions to store or recall various function
settings using web control from a PC.
0 To memorize settings, click “Save” on the Setup Menu screen.
0 To call up settings, click “Load” on the Setup Menu screen.
0 We recommend using one of the following web browsers.
Internet Explorer 10 and above
Mozilla Firefox 24 and above
Google Chrome 29 and above
Safari 5.x and above
Front panel
Display
Rear panel
137
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Panel lock function
To prevent accidental operation of this unit, you can disable operation of
the buttons on the front panel.
X
M-DAX
DIMMER
Disabling all key button operations
1
STATUS
2
.
3
TUNER PRESET
CH –
2
3
Display
Rear panel
Use TUNER PRESET CH + or TUNER PRESET CH - to
select “FP/VOL LOCK On”.
Press STATUS to enter the setting.
Disabling all button operations except
VOLUME
TUNER PRESET
CH +
1
Front panel
Press X while you press and hold M-DAX and DIMMER
with the unit in standby mode.
138
Press X while you press and hold M-DAX and DIMMER
with the unit in standby mode.
Use TUNER PRESET CH + or TUNER PRESET CH - to
select “FP LOCK On”.
Press STATUS to enter the setting.
All button operations except X and VOLUME are disabled.
Remote
Index
Contents
Connections
Playback
Settings
Tips
Canceling the Panel lock function
1
2
Press X while you press and hold M-DAX and DIMMER
with the unit in standby mode.
Press TUNER PRESET CH + or TUNER PRESET CH - to
select “FP LOCK zOff”.
(z The currently set mode.)
3
Press STATUS to enter the setting.
The Panel lock function is canceled.
Even when the Panel lock function is set, you can operate the unit using the remote
control unit.
Front panel
Display
Rear panel
139
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Remote lock function
When connecting an IR receiver, enable the Remote lock function. When
the function is enabled, you can not perform operations with the remote
control unit.
By default, this function is disabled.
X
M-DAX
DIMMER
Disabling the sensor function of the
remote control unit
1
STATUS
2
.
3
TUNER PRESET
CH –
Press X while you press and hold M-DAX and DIMMER
with the unit in standby mode.
Use TUNER PRESET CH + or TUNER PRESET CH - to
select “RC LOCK On”.
Press STATUS to enter the setting.
The infrared light receiving function is disabled.
Enabling the remote sensor function
TUNER PRESET
CH +
1
2
Press X while you press and hold M-DAX and DIMMER
with the unit in standby mode.
Press TUNER PRESET CH + or TUNER PRESET CH - to
select “RC LOCK zOff”.
(z The currently set mode.)
3
Front panel
Display
Rear panel
140
Press STATUS to enter the setting.
Infrared light receiving function on the main unit is enabled.
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playback in ZONE2 (Separate room)
You can operate this unit to enjoy audio in a room (ZONE2) that is different from the room where this unit is placed (MAIN ZONE).
You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE
and ZONE2.
Connecting ZONE2
You can use the following two methods to play back audio in ZONE2.
0 “Connecting using a speaker output connector” (v p. 141)
0 “Connecting using an external amplifier” (v p. 142)
o Connection 1: Connection through the speaker
output terminals
When “Assign Mode” (v p. 188) is set to “ZONE2” in the menu,
ZONE2 audio is output from the SURROUND BACK speaker terminal.
MAIN ZONE
This unit
.
(R)
Front panel
Display
Rear panel
141
Remote
Index
ZONE2
(L)
Contents
Connections
Playback
Settings
Tips
o Connection 2 : Connection using an external
amplifier
The audio signals of this unit’s ZONE2 audio output connectors are
output to the ZONE2 amplifiers and played on these amplifiers.
ZONE2
MAIN ZONE
This unit
L
Power amplifier
R
.
AUX IN
Front panel
Display
Rear panel
142
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Playback in ZONE2
1
Tips
Appendix
Press ZONE2 to set the operating zone to ZONE2 with
the remote control.
The ZONE2 button lights.
ZONE SELECT
ZONE2
Input source
select buttons
MAIN
POWER
ZONE 2
SLEEP
CBL/SAT
DVD
Blu-ray
GAME
AUX1
MEDIA
PLAYER
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
ONLINE
MUSIC
POWER X
2
3
INTERNET
RADIO
MUTE :
VOLUME
MUTE
INFO
Press the input source select button to select the input
source to be played.
The audio signal of the selected source is output to ZONE2.
0 To perform an operation with the main unit, press ZONE2
SOURCE. Each time you press ZONE2 SOURCE, the input
source changes.
ECO
CH / PAGE
Press POWER X to turn on the ZONE2 power.
The ZONE2 power indicator on the display lights.
0 Power in ZONE2 can be turned on or off by pressing ZONE2
ON/OFF on the main unit.
VOLUME df
OPTION
ENTER
BACK
TUNE
SETUP
-
TUNE
+
SMART SELECT
1
3
4
PURE
.
MOVIE
2
SOUND MODE
MUSIC
GAME
Front panel
Display
Rear panel
143
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Adjusting the volume
Use VOLUME df to adjust the volume.
”.
0 At time of purchase, “Volume Limit” is set to “70(–10 dB)
(v p. 205)
Turn VOLUME after pressing ZONE2 SOURCE on the main unit to adjust the
sound volume.
o Turning off the sound temporarily (Muting)
Press MUTE :.
The sound is reduced to the level set at “Mute Level” in the menu.
(v p. 206)
0 To cancel mute, either adjust the sound volume or press MUTE :
again.
Front panel
Display
Rear panel
144
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Detailed items
Description
Page
Dialog Level Adjust
This setting adjusts the output level to clarify the dialogue output from the center
channel.
151
Subwoofer Level Adjust
This setting adjusts the volume level for the subwoofer.
151
Surround Parameter
Adjusts surround sound parameters.
152
M-DAX
Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
156
Audio Delay
Compensates for incorrect timing between video and audio.
157
Volume
Sets the MAIN ZONE (room where the unit is located) volume setting.
157
.
Setting items
Audio
.
Video
Front panel
Audyssey
Makes Audyssey
Volume® settings.
Graphic EQ
Uses the graphic equalizer to adjust the tone of each speaker.
160
Picture Adjust
Adjusts picture quality.
162
HDMI Setup
Makes settings for HDMI video/audio output.
164
Output Settings
Makes settings for video output.
168
On Screen Display
Configures the on-screen display settings.
172
TV Format
Sets the video signal format to be output for the TV you are using.
173
Display
MultEQ®
Rear panel
XT, Audyssey Dynamic
145
Remote
EQ®
and Audyssey Dynamic
Index
158
Contents
.
Setting items
Inputs
Connections
Playback
Settings
Detailed items
Tips
Appendix
Description
Page
Input Assign
Changes input connector assignment.
174
Source Rename
Changes the display name for input source.
176
Hide Sources
Removes from the display input sources that are not used.
176
Source Level
Adjusts the playback level of the audio input.
176
Input Select
Sets the audio input mode and decode mode.
177
Audyssey® Setup
The acoustic characteristics of the connected speakers and listening room are
measured and the optimum settings are made automatically.
178
Manual Setup
Sets up the speakers manually or changes the Audyssey® Setup settings.
188
Information
Displays network information.
196
Connection
Selects whether to connect the home network to a wireless LAN or a wired LAN.
196
Settings
Used for manually setting the IP address or when using a proxy server.
199
IP Control
Enables network communication in standby power mode.
200
Friendly Name
The “Friendly Name” is the name of this unit displayed on the network. You can change
the Friendly Name according to your preferences.
201
Diagnostics
Used to check the network connection.
201
Maintenance Mode
Use when receiving maintenance from a Marantz service engineer or custom installer.
Ordinarily, this mode isn’t suitable for use by the end user, only by a trained service
technician or custom installation professional.
202
.
Speakers
.
Network
Front panel
Display
Rear panel
146
Remote
Index
Contents
Connections
.
Setting items
General
Playback
Settings
Detailed items
Tips
Description
Page
Language
Changes the language of the display on the TV screen.
203
ECO
Configures the ECO Mode and Auto Standby energy-saving functions.
203
ZONE2 Setup
Sets ZONE2 audio playback settings.
205
Zone Rename
Changes the display title of each zone to one you prefer.
206
Smart Select Names
Changes the Smart Select Name display title to one you prefer.
206
Trigger Out
Select the conditions for activating trigger out function.
207
Front Display
Makes settings related to the display on this unit.
207
Information
Shows information about this unit settings, input signals, etc.
208
Usage Data
Selects whether or not to send anonymous usage data to Marantz.
209
Firmware
Checks for the latest firmware information about updates and upgrades, updates the
firmware, and sets up the notification message display.
210
Setup Lock
Protects settings from inadvertent changes.
212
Begin Setup...
Performs basic installation/connections/settings from the beginning according to the
guidance indicated on the TV screen.
Language Select
Sets individual setting items according to the guidance displayed on the TV screen.
Speaker Setup
.
Setup Assistant Speaker Calibration
Network Setup
Input Setup
Front panel
Appendix
Display
Rear panel
147
Remote
Index
Page 8 of
the separate
manual
“Quick Start
Guide”
Contents
Connections
ZONE SELECT
MAIN
CBL/SAT
Settings
DVD
Blu-ray
GAME
AUX1
MEDIA
PLAYER
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
ONLINE
MUSIC
1
2
3
ECO
VOLUME
MUTE
INFO
uio p
ENTER
4
5
OPTION
ENTER
BACK
SETUP
TUNE
-
TUNE
Press MAIN on the remote control unit to set the
operating zone to the MAIN ZONE.
Press SETUP.
The menu is displayed on the TV screen.
Use ui p to select the menu to be set or operated,
then press ENTER.
Use o p to change to desired setting.
Press ENTER to enter the setting.
0 To return to the previous item, press BACK.
0 Exiting the Menu, press SETUP while the menu is displayed. The
SETUP
BACK
menu display disappears.
+
SMART SELECT
1
3
4
PURE
.
MOVIE
2
SOUND MODE
MUSIC
GAME
Front panel
Display
Appendix
The MAIN button lights.
INTERNET
RADIO
CH / PAGE
Tips
Menu operations
POWER
SLEEP
ZONE 2
MAIN
Playback
Rear panel
148
Remote
Index
Contents
Connections
Playback
Settings
Tips
Inputting characters
On this unit, you can change the name displayed on the following screens to the names that you prefer.
0 Preset Name (v p. 78)
0 Text Search (v p. 110)
0 Source Rename (v p. 176)
0 Friendly Name (v p. 201)
0 Zone Rename (v p. 206)
0 Smart Select Names (v p. 206)
0 Character input for the network functions
Front panel
Display
Rear panel
149
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Using the keyboard screen
1
3
Display the screen for inputting characters.
GExampleH “Source Rename” screen
Inputs/Source Rename
CBL/SAT
4
CBL/SAT
Clear
Insert
Delete
A B C D E
F G H
N O P Q R
S
I
J
K
L M
T U V W X Y
!
$ % &
< = >
a/A
‘
(
)
* +
Space
,
;
Cancel
“
5
6
Z
0 1 2 3 4 5 6 7 8 9
#
OK
Select a character to be input with uio p then press
ENTER.
Repeat steps 2 - 4 to change the name.
Use uio p to select “OK”, then press ENTER.
.
Changes the display name for this source
Press ENTER to move the cursor to the character that
you wish to change.
0 Each time ENTER is pressed, the cursor moves by one
character.
2
Use uio p to select , or ..
Front panel
Display
Rear panel
150
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Audio
Make audio-related settings.
Dialog Level Adjust
Subwoofer Level Adjust
This setting adjusts the output level to clarify the dialogue output from the
center channel.
This setting adjusts the volume level for the subwoofer.
o Subwoofer Level Adjust
o Dialog Level Adjust
Set whether to adjust the subwoofer level.
Set whether to adjust the dialog level or not.
On:
Enables the adjustment of the dialog
level.
Off
(Default):
Disables the adjustment of the dialog
level.
Enables the adjustment of the subwoofer
level.
Off
(Default):
Disables the adjustment of the subwoofer
level.
o Subwoofer Level
o Level
Adjusts the volume level for the subwoofer.
Adjusts the volume output from the center channel.
–12.0 dB – +12.0 dB (Default : 0.0 dB)
–12.0 dB – +12.0 dB (Default : 0.0 dB)
Front panel
On:
Display
Rear panel
151
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Loudness Management
Surround Parameter
This sets whether to output as specified in “Dynamic Compression” or
output directly without compressing the dynamic range of audio
recorded in the disc.
You can adjust the surround audio sound field effects to match your
preferences.
The items (parameters) that can be adjusted depend on the signal being
input and the currently set sound mode. For details on the adjustable
parameters, see “Sound modes and surround parameters” (v p. 244).
0 Some setting items cannot be set while playback is stopped. Make the settings
during playback.
0 “Surround Parameter” settings are stored for each sound mode.
On
(Default):
Outputs are given based on enabling the
settings made in “Dynamic Compression”
and “Dialog normalization function”
(v p. 208).
Off:
“Dynamic Compression” settings and
“Dialogue Normalization” are disabled,
and the signals on the disc are output as
is.
o Cinema EQ
Gently softens the upper treble range of movie soundtracks to reduce
possible harshness and improve clarity.
On:
“Cinema EQ” is used.
Off
(Default):
“Cinema EQ” is not used.
Front panel
Display
Appendix
Rear panel
You can set this when Dolby TrueHD signals are input.
152
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Low Frequency Effects
o Dynamic Compression
Adjust the low frequency effects level (LFE).
Compress dynamic range (difference between loud and soft sounds).
Auto:
Automatic dynamic range compression
on/off control according to source.
Low / Medium / High:
These set the compression level.
Off:
Dynamic range compression is always off.
n When “Input Mode” is set other than to “7.1CH
IN”
-10 dB – 0 dB (Default : 0 dB)
n When “Input Mode” is set to “7.1CH IN”
0 dB / +5 dB / +10 dB / +15 dB (Default: +10 dB)
0 “Auto” can only be set when Dolby TrueHD signals are input.
0 The default setting is “Off”. When the input signal is Dolby TrueHD source, the
default setting is “Auto”.
For proper playback of the different sources, we recommend setting to the
values below.
0 Dolby Digital sources : 0 dB
0 DTS movie sources : 0 dB
0 DTS movie sources: -10 dB
Front panel
Display
Rear panel
153
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Dimension
o Center Image
Shift sound image center to front or rear to adjust playback balance.
Distributes the dialogue output from the center channel to the front left
and right channels and widens the sound image in the front.
0 – 6 (Default : 3)
0.0 – 1.0 (Default : 0.3)
0 You can set this when the sound mode is Dolby PLg/gx in the “Music” mode.
0 As you set a smaller number, the surround sound field shifts backward; as you
set a larger number, the surround sound field shifts forward.
0 You can set this when the sound mode is DTS Neo:6 in the “Music” mode.
0 The smaller the value, the more dialogue is concentrated on the center
channel. The larger the value, the more dialogue is distributed to front left and
right channels, and the more the sound image widens in the front.
o Center Width
o Panorama
Distributes the dialogue output from the center channel to left and right
channels and widens the sound image in the front.
The front sound field is expanded further towards the back to create a
seamlessly inclusive sound impression.
On:
Use “Panorama”.
Off
(Default):
Do not use “Panorama”.
0 – 7 (Default : 3)
0 You can set this when the sound mode is Dolby PLg/gx in the “Music” mode.
0 The smaller the value, the more dialogue is concentrated on the center
channel. The larger the value, the more dialogue is distributed to front left and
right channels, and the more the sound image widens in the front.
You can set this when the sound mode is Dolby PLg/gx in the “Music” mode.
Front panel
Display
Rear panel
154
Remote
Index
Contents
Connections
Playback
Settings
o Height Gain
Tips
Appendix
o Subwoofer
Control the front height channel volume.
Turn subwoofer output on and off.
Low:
Reduce the front height channel volume.
Normal
(Default):
Front height channel sound is output with
standard sound volume.
On
(Default):
The subwoofer is used.
Off:
The subwoofer is not used.
High:
Increase the front height channel volume.
You can set this when the sound mode is “Direct” or “Stereo” and in the menu
“Subwoofer Mode” is set to “LFE+Main”. (v p. 194)
You can set this in the “PLgz” sound mode or when using the PLgz decoder.
o Set Defaults
The “Surround Parameter” settings are returned to the default settings.
Front panel
Display
Rear panel
155
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
M-DAX
0 The M-DAX indicator lights.
0 This item can be set with analog signals or PCM signal (Sample Rate =
44.1/48 kHz) is input.
0 This item default setting for “Online Music”, “iPod/USB” and “Bluetooth” is
“Low”. All others are set to “Off”.
0 This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
0 “M-DAX” settings are stored for each input source.
0 This can be set by pressing M-DAX on the main unit.
Compressed audio formats such as MP3, WMA (Windows Media Audio)
and MPEG-4 AAC reduce the amount of data by eliminating signal
components that are hard for the human ear to hear. The “M-DAX”
function generates the signals eliminated upon compression, restoring the
sound to conditions near those of the original sound before compression.
It also restores the original bass characteristics for a rich and expanded
tonal range.
o Mode
High:
Optimized mode for compressed sources with very weak
highs (64 kbps and under).
Medium:
Apply suitable bass and treble boost for all compressed
sources (96 kbps and under).
Low:
Optimized mode for compressed sources with normal highs
(96 kbps and over).
Off:
Do no use “M-DAX”.
Front panel
Display
Rear panel
156
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Limit
Audio Delay
Make a setting for maximum volume.
Compensates for incorrect timing between video and audio.
60 (–20 dB) / 70 (–10 dB) / 80 (0 dB)
0 ms – 200 ms (Default : 0 ms)
Off (Default)
o Power On Level
0 Audio Delay for game mode can be set when “Video Mode” is set to “Auto” or
“Game”. (v p. 168)
0 “Audio Delay” settings are stored for each input source.
Define the volume setting that is active when the power is turned on.
Volume
Set the MAIN ZONE (room where the unit is located) volume setting.
o Scale
Last
(Default):
Use the memorized setting from the last
session.
Mute:
Always use the muting on condition when
power is turned on.
1 – 98 (–79 dB – 18 dB) :
The volume is adjusted to the set level.
o Mute Level
Set how volume is displayed.
0 - 98
(Default):
Display in the range 0 (Min) to 98.
–79.5 dB – 18.0 dB:
Display ---dB (Min), in the range –79.5 dB
to 18.0 dB.
Set the amount of attenuation when muting is on.
Full
(Default):
The sound is muted entirely.
–40 dB :
The sound is attenuated by 40 dB down.
–20 dB :
The sound is attenuated by 20 dB down.
“Scale” settings are reflected in all the zones.
Front panel
Appendix
Display
Rear panel
157
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o MultEQ® XT
Audyssey
MultEQ® XT compensates for both time and frequency characteristics
of the listening area based on Audyssey® Setup measurement results.
Selection is done from three types of compensation curves. We
recommend the “Reference” setting.
Set Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey
Dynamic Volume®. These can be selected after Audyssey® Setup has
been performed.
For additional information on Audyssey technology, please see
“Explanation of terms” (v p. 250).
0 “MultEQ® XT”, “Dynamic EQ” and “Dynamic Volume” settings are stored for each
input source.
0 When the sound mode is in the “Direct” or “Pure Direct” mode, “MultEQ® XT”,
“Dynamic EQ” and “Dynamic Volume” settings cannot be configured.
Reference
(Default):
Selects the default calibrated setting with
a slight roll off at high frequencies, which
is optimized for movies.
L/R Bypass:
Selects the reference setting, but
bypasses MultEQ® XT on the front left
and right speakers.
Flat:
Selects the calibrated setting which is
optimized for small rooms where your
listening position is closer to the
speakers.
Off :
Do not use “MultEQ® XT”.
When using headphones, “MultEQ® XT” is automatically set to “Off”.
Front panel
Display
Rear panel
158
Remote
Index
Contents
Connections
Playback
Settings
o Dynamic EQ
Tips
Appendix
o Reference Level Offset
Solves the problem of deteriorating sound quality as volume is
decreased by taking into account human perception and room
acoustics.
Works with MultEQ® XT.
On
(Default):
Use Dynamic EQ.
Off:
Do not use Dynamic EQ.
Audyssey Dynamic EQ® is referenced to the standard film mix level. It
makes adjustments to maintain the reference response and surround
envelopment when the volume is turned down from 0 dB. However,
film reference level is not always used in music or other non-film
content. Dynamic EQ Reference Level Offset provides three offsets
from the film level reference (5 dB, 10 dB, and 15 dB) that can be
selected when the mix level of the content is not within the standard.
Recommended setting levels for content are shown below.
0 dB (Film Reference)
(Default):
When the menu “Dynamic EQ” setting is “On”, it is not possible to do “Tone
Control” adjustment. (v p. 114)
5 dB :
10 dB :
15 dB :
Optimized for content such as
movies.
Select this setting for content that has
a very wide dynamic range, such as
classical music.
Select this setting for jazz or other
music that has a wider dynamic
range. This setting should also be
selected for TV content as that is
usually mixed at 10 dB below film
reference.
Select this setting for pop/rock music
or other program material that is
mixed at very high listening levels
and has a compressed dynamic
range.
Setting is enabled when “Dynamic EQ” is “On”. (v p. 159)
Front panel
Display
Rear panel
159
Remote
Index
Contents
Connections
Playback
Settings
o Dynamic Volume
Most adjustment to softest and loudest
sounds.
Medium:
Medium adjustment to loudest and
softest sound.
Light:
Least adjustment to loudest and softest
sounds.
Off
(Default):
Do not use Dynamic Volume.
Uses the graphic equalizer to adjust the tone of each speaker.
0 Speakers for which “Graphic EQ” can be set differ according to the sound mode.
0 This can be set when the “MultEQ® XT” setting is “Off”. (v p. 158)
0 This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
o Graphic EQ
Set whether to use the graphic equalizer or not.
On:
Use the graphic equalizer.
Off
(Default):
Do not use the graphic equalizer.
If “Dynamic Volume” is set to “Yes” in “Audyssey® Setup”, the setting is
automatically changed to “Medium”. (v p. 178)
Front panel
Display
Rear panel
Appendix
Graphic EQ
Solves the problem of large variations in volume level between TV,
movies and other content (between quiet passages and loud
passages, etc.) by automatically adjusting to the user’s preferred
volume setting.
Heavy:
Tips
160
Remote
Index
Contents
Connections
Playback
Settings
o Speaker Selection
Tips
o Curve Copy
Select whether to adjust tones for individual speakers or for all
speakers.
All:
Adjust all speaker tones together.
Left/Right
(Default):
Adjust the left and right speaker tones
together.
Each:
Adjust the tone for each speaker.
Copy the flat correction curve created in the Audyssey® Setup.
“Curve Copy” is displayed after Audyssey® Setup has been performed.
o Set Defaults
The “Graphic EQ” settings are returned to the default settings.
o Adjust EQ
Adjust tonal balance for each frequency band. Adjust the speaker
selected in “Speaker Selection”.
1. Select the speaker.
2. Select the adjustment frequency band.
63 Hz / 125 Hz / 250 Hz / 500 Hz / 1 kHz / 2 kHz / 4 kHz / 8 kHz /
16 kHz
3. Adjust the level.
–20.0 dB – +6.0 dB (Default : 0.0 dB)
Front panel
Appendix
Display
Rear panel
161
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Video
Make video-related settings.
o Picture Mode
Picture Adjust
Select the desired picture mode according to the video content and
your viewing environment.
Picture quality can be adjusted.
0 Can be set when the “Video Conversion” setting is “On”. (v p. 169)
0 Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source.
(v p. 175)
0 “Contrast”, “Brightness”, “Saturation”, “Noise Reduction” and “Enhancer” can be
set when “Picture Mode” is set to “Custom”.
0 “Picture Adjust” settings are stored for each input source.
0 “Picture Adjust” cannot be set when 4K signals are input.
Front panel
Display
Rear panel
Standard:
The standard mode suited for most living room viewing
environments.
Movie:
A mode suited for watching movies in a dark room such
as a theater room.
Vivid:
A mode that makes graphic images for games, etc.
brighter and more vivid.
Streaming: A mode suited for low bit rate video sources.
162
ISF Day:
A mode suited for watching movies in a bright room
during the day.
ISF Night:
A mode suited for watching movies in a dark room at
night.
Custom:
Adjusts the picture quality manually.
Off:
No picture quality adjustment is done with this unit.
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Contrast
Adjust picture contrast.
0 The two special adjustment modes, ISF Day and ISF Night, should be used by
a certified technician to adjust the color calibration to match the installation
conditions.
We recommend that the settings and adjustments be carried out by an ISFcertified technician.
0 These settings can also be configured using “Picture Mode” in the option
menu. (v p. 116)
0 The default settings are as follows.
0 For “Online Music” and “iPod/USB” input sources: Streaming
0 For input sources other than “Online Music” and “iPod/USB”: Off
-50 – +50 (Default : 0)
o Brightness
Adjust picture brightness.
-50 – +50 (Default : 0)
o Saturation
Adjust picture chroma level (color saturation).
-50 – +50 (Default : 0)
Front panel
Display
Rear panel
163
Remote
Index
Appendix
Contents
Connections
Playback
Settings
o Noise Reduction
Tips
Appendix
HDMI Setup
Reduce overall video noise.
Make settings for HDMI video/audio output.
Low / Medium / High / Off (Default : Off)
NOTE
o Enhancer
When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes more
standby power. If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
Emphasize picture sharpness.
0 – +12 (Default : 0)
o Auto Lip Sync
Make automatic compensation for timing shift in audio and video
output.
Front panel
Display
Rear panel
164
On
(Default):
Correct automatically.
Off:
Do not correct automatically.
Remote
Index
Contents
Connections
Playback
Settings
o HDMI Audio Out
Tips
Appendix
o Video Output
Select HDMI audio output device.
Select the HDMI monitor connector to be used.
AVR
(Default):
Play back through speakers connected to
the unit.
TV:
Play back through TV connected to the
unit.
0 When the HDMI control function is activated, priority is given to the TV audio
setting. (“HDMI control function” (v p. 130))
0 When the power of this unit is on and “HDMI Audio Out” is set to “TV”, audio is
output as 2-channel from the HDMI OUT connector.
Auto(Dual)
(Default):
The presence of a TV connected to the
HDMI MONITOR 1 or HDMI MONITOR 2
connector is detected automatically, and
that TV connection is used.
Monitor 1:
A TV connected to the HDMI MONITOR
1 connector is always used.
Monitor 2:
A TV connected to the HDMI MONITOR
2 connector is always used.
0 If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are
connected and “Resolution” is set to “Auto”, the signals are output with a
resolution that is compatible with both TVs. (v p. 170)
0 When the “Resolution” setting in the menu is not set to “Auto”, set the
resolution in “Video” - “HDMI Monitor 1” and “HDMI Monitor 2” to one that is
compatible with both TVs. (v p. 170, 208)
Front panel
Display
Rear panel
165
Remote
Index
Contents
Connections
Playback
Settings
o HDMI Pass Through
Tips
Appendix
o HDMI Control
Selects how this unit will transmit HDMI signals to the HDMI output in
standby power mode.
On
(Default):
Transmits the selected HDMI input
through the AV receiver’s HDMI output
when this unit is in standby power mode.
Off:
No HDMI signals are transmitted through
this unit’s HDMI output in standby power
mode.
You can link operations with devices connected to HDMI and
compatible with HDMI Control.
On:
Use HDMI control function.
Off
(Default):
Do not use HDMI control function.
0 When using the HDMI control function, connect to the HDMI MONITOR 1
connector.
0 Please consult the operating instructions for each connected device to check
the settings.
0 Refer to “HDMI control function” for more information about the HDMI control
function. (v p. 130)
NOTE
If the “HDMI Control” settings have been changed, always reset the power to
connected devices after the change.
Front panel
Display
Rear panel
166
Remote
Index
Contents
Connections
Playback
Settings
o Pass Through Source
Last:
The most recently used input source will
go into standby mode.
CBL/SAT / DVD /
Blu-ray / Game /
AUX1 / AUX2 /
Media Player / CDz
(Default : CBL/SAT):
Pass through the selected input source.
Sets automatic switching to the “TV Audio” input when a TV connected
via HDMI sends an appropriate CEC control command to the AVR.
z“Pass Through Source” can be set when any of the HDMI
connectors is assigned to “CD” for the input source in the “Input
Assign” setting. (v p. 174)
Rear panel
On
(Default):
Select the TV Audio input automatically
when receiving a command from the TV.
Off:
Do not select the TV Audio input
automatically when receiving a command
from the TV.
o Power Off Control
Links the power standby of this unit to external devices.
“Pass Through Source” can be set when “HDMI Control” is set to “On” or “HDMI
Pass Through” is set to “On”.
Display
Appendix
o TV Audio Switching
Sets the HDMI connector that inputs HDMI signals when in standby.
Front panel
Tips
167
All
(Default):
If power to a connected TV is turned off
independently of the input source, power
to this unit is automatically set to standby.
Video:
With an input source being selected that
is assigned either “HDMI”, “COMP” or
“VIDEO”, when you turn the power of the
TV off, power to this unit is automatically
set to standby. (v p. 175)
Off:
This unit does not link with power to a TV.
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Video Mode
Output Settings
Configure the video processing method to match the type of video
content.
Makes settings for video output.
0 Can be set when “HDMI”, “COMP” or “VIDEO” (v p. 175) is assigned for each
input source.
0 “Resolution”, “Progressive Mode” and “Aspect Ratio” can be set when “i/p Scaler”
is set to anything other than “Off”.
0 “Output Settings” cannot be set when 4K signals are input.
0 “Video Conversion”, “i/p Scaler”, “Resolution”, “Progressive Mode” and “Aspect
Ratio” settings are stored for each input source.
Auto
(Default):
Process video automatically based on
the HDMI content information.
Game:
Always process video for game content.
Minimize the video delay when the video
is delayed compared to the button
operations on the controller of the game
console.
Movie:
Perform image processing that is suitable
for contents other than games.
If “Video Mode” is set to “Auto”, the mode is switched according to the input
contents.
Front panel
Display
Rear panel
168
Remote
Index
Contents
Connections
Playback
Settings
o Video Conversion
Appendix
o i/p Scaler
The input video signal is converted automatically in conjunction with
the connected TV. (“Video conversion function” (v p. 237))
On
(Default):
The input video signal is converted.
Off:
The input video signal is not converted.
Front panel
Tips
Display
Rear panel
Set the video input signal to be subjected to i/p scaler processing.
i/p Scaler will convert the resolution of the input video signal to the
value set in “Resolution” (v p. 170).
n When the input source is set other than to “iPod/
USB” and “Online Music”
169
Analog
(Default):
Use i/p (interlace-to-progressive) scaler
function for analog video signals.
Analog & HDMI:
Use i/p scaler function for analog and
HDMI video signal.
HDMI:
Use i/p scaler function for HDMI video
signals.
Off:
Do not use i/p scaler function.
Remote
Index
Contents
Connections
Playback
Settings
Use i/p scaler function.
Off:
Do not use i/p scaler function.
Set the output resolution. You can set “Resolution” separately for
HDMI output of the analog video input and HDMI input.
Auto
(Default):
Display
Rear panel
The resolution supported by the TV
connected to the HDMI MONITOR OUT
connector is detected automatically and
the appropriate output resolution is set.
480p/576p / 1080i /
Set the output resolution.
720p / 1080p:24Hz / 4K :
0 “Analog & HDMI” can be set for input sources for which an HDMI input
connector is assigned.
0 Which items can be set depend on the input source assigned to each input
connector.
0 This function is not effective when the input signal is “x.v.Color”, 3D, sYCC601
color, Adobe RGB color, Adobe YCC601 color or computer resolutions.
Front panel
Appendix
o Resolution
n When the input source is set to “iPod/USB” and
“Online Music”
On
(Default):
Tips
0 When “i/p Scaler” is set to “Analog & HDMI”, the resolution of both the analog
video input signal and HDMI input signal can be set. (v p. 169)
0 When set to “1080p:24Hz”, you can enjoy film-like pictures for film sources (in
24 Hz). For video sources and mixed sources, we recommend setting the
resolution to “1080p”.
0 It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output at a
resolution of 1080p/50Hz.
170
Remote
Index
Contents
Connections
Playback
Settings
o Progressive Mode
Tips
Appendix
o Aspect Ratio
Set an appropriate progressive conversion mode for the source video
signal.
Auto
(Default):
The video signal is automatically
detected and the appropriate mode is
set.
Video:
Select mode suitable for video playback.
Video and Film:
Select mode suitable for video and 30frame film material playback.
Set the aspect ratio for the video signals output to the HDMI.
16:9
(Default):
Output at 16:9 aspect ratio.
4:3 :
Output at 4:3 aspect ratio with black bars
on the sides of a 16:9 TV screen. (except
for 480p/576p output)
This item can be set when “i/p Scaler” is set to anything other than “Off”.
(v p. 169)
This item can be set when “i/p Scaler” is set to anything other than “Off”.
(v p. 169)
Front panel
Display
Rear panel
171
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Now Playing
On Screen Display
Select the on-screen display user interface preferences.
Sets the display time for the playback display when the input source is
“Online Music”, “iPod/USB”, “Bluetooth” or “Tuner”.
o Volume
Always On
(Default):
Show display continuously.
Auto Off:
Show display for 30 seconds after
operation.
Sets where to display the volume level.
Bottom
(Default):
Top:
Off:
Display at the bottom.
Display at the top.
Turn display off.
When the master volume display is hard to see when superimposed text (closed
captioning) or movie subtitles are present, set to “Top”.
o Info
Displays status of operation temporarily when the sound mode is
changed, or input source is switched.
On
(Default):
Off:
Front panel
Shows the volume display.
Does not show the volume display.
Display
Rear panel
172
Remote
Index
Contents
Connections
Playback
Settings
Tips
TV Format
Set the video signal format to be output for the TV you are using.
o Format
NTSC
(Default):
Select NTSC output.
PAL:
Select PAL output.
“Format” can also be set by the following procedure. However, the menu screen
is not displayed. Following the display content to make the setting.
1. Press and hold the main unit’s ZONE2 SOURCE and STATUS for at least 3
seconds.
“Video Format <NTSC>” appears on the display.
2. Use the main unit’s TUNER PRESET CH + or TUNER PRESET CH - and set
the video signal format.
3. Press the main unit’s STATUS to complete the setting.
NOTE
When a format other than the video format of the connected TV is set, the picture
will not be displayed properly.
Front panel
Display
Rear panel
173
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Inputs
Perform settings related to input source playback.
You do not have to change the settings to use the unit. Make settings when needed.
Input Assign
By default, each item is set as follows.
By making connections as indicated by the input sources printed on the
audio/video input connectors of this unit, you can just press one of the
input source select buttons to easily play back audio or video from a
connected device.
Please change the assignment of the HDMI input connector, digital audio
input connector, analog audio input connector, component video input
connector and video input connector when connecting an input source
that differs from that printed to the audio/video input connectors of this
unit.
Input source
Inputs/Input Assign
Set Defaults
CBL/SAT
DVD
Blu-ray
Game
Media Player
TV Audio
AUX1
AUX2
CD
HDMI
DIGITAL
ANALOG
COMP
VIDEO
1
2
3
4
5
Front
6
-
COAX1
COAX2
OPT1
OPT2
1
2
3
4
1
2
Front
-
1
2
Front
-
Rear panel
ANALOG
COMP
CBL/SAT
1
COAX1
1
1
VIDEO
1
DVD
2
COAX2
2
2
2
Blu-ray
3
–
–
–
–
Game
4
–
3
–
–
Media Player
5
–
–
–
–
TV Audio
–
OPT1
–
–
–
AUX1
Front
–
–
Front
Front
AUX2
6
–
–
–
–
CD
–
OPT2
4
–
–
When using the digital audio output on a TV/satellite box:
To play the video signal assigned to “HDMI” combined with the audio
signal assigned at “Input Assign” - “DIGITAL”, you will also need to
select “Digital” in the “Input Mode” (v p. 177).
.
Display
DIGITAL
n TV set top box/satellite users please note
Changes HDMI input assignments
Front panel
Input connector
HDMI
174
Remote
Index
Contents
Connections
Playback
Settings
o HDMI
Tips
Appendix
o ANALOG
Set this to change the HDMI input connectors assigned to the input
sources.
Set this to change the analog audio input connectors assigned to the
input sources.
1 / 2 / 3 / 4 / 5 / 6 / Assign an HDMI input connector to the selected
7 / Front:
input source.
1 / 2 / 3 / 4:
–:
Do not assign an HDMI input connector to the
selected input source.
–:
Assign a analog audio input connector to the selected
input source.
Do not assign a analog audio input connector to the
selected input source.
o COMP (Component video)
Set this to change the component video input connectors assigned to
the input sources.
When “HDMI Control” is set to “On” in the menu, “HDMI” cannot be assigned to
“TV Audio”. (v p. 166)
1 / 2 / Front:
o DIGITAL
Set this to change the digital audio input connectors assigned to the
input sources.
–:
COAX1 (Coaxial) /
Assign a digital audio input connector to the
COAX2 /
OPT1 (Optical) / selected input source.
OPT2:
–:
Assign the component video input connector to the
selected input source.
Do not assign a component video input connector to the
selected input source.
o VIDEO
Set this to change the composite video input connectors assigned to
the input sources.
Do not assign a digital audio input connector to
the selected input source.
1 / 2 / Front:
–:
Assign the video input connector to the selected input
source.
Do not assign a video input connector to the selected
input source.
o Set Defaults
The “Input Assign” settings are returned to the default settings.
Front panel
Display
Rear panel
175
Remote
Index
Contents
Connections
Playback
Settings
Source Rename
Tips
Source Level
Change the display name for input source.
This is convenient when the name of your device and the input source
name of this unit are different. You can change the name to suit your
needs. When the renaming is completed, the name is displayed on this
unit’s display and on the menu screen.
CBL/SAT / DVD / Blu-ray /
Game / AUX1 / AUX2 /
Media Player / CD / TV Audio:
Change the display name for input
source.
Set Defaults:
The Source Rename settings are
returned to the default settings.
This function corrects the playback level of the selected input source’s
audio input.
Make this setting if there are differences in the input volume levels
between the different sources.
-12 dB – +12 dB (Default : 0 dB)
“Source Level” settings are stored for each input source.
Up to 12 characters can be input. For character input, see “Using the keyboard
screen” (v p. 150).
Hide Sources
Remove from the display input sources that are not used.
Show
(Default):
Use this source.
Hide:
Do not use this source.
Front panel
Appendix
Display
Rear panel
176
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Decode Mode
Input Select
Set the audio decode mode for input source.
It is normally recommended to set the audio input mode to “Auto”. But
we recommend changing it to “PCM” or “DTS” if the start of the source
is clipped or noise occurs.
Set the audio input mode and decode mode of each input source.
The input modes available for selection may vary depending on the input
source.
“Input Select” settings are stored for each input source.
o Input Mode
Set the audio input modes for the different input sources.
It is normally recommended to set the audio input mode to “Auto”.
Auto
(Default):
Automatically detect input signal and
perform playback.
HDMI:
Play only signals from HDMI input.
Digital:
Play only signals from digital audio input.
Analog:
Play only signals from analog audio input.
7.1CH IN:
Only signals input from the 7.1CH IN
connector will be played back.
Auto
(Default):
Detect type of digital audio input signal
and decode and play automatically.
PCM:
Decode and play only PCM input signals.
DTS:
Decode and play only DTS input signals.
This item can be set for input sources for which “HDMI” or “DIGITAL” is assigned
at “Input Assign” (v p. 174).
0 If “HDMI Control” is set to “On” and a TV compatible with the ARC is
connected via the HDMI MONITOR 1 connectors, the input mode whose input
source is “TV Audio” is fixed to ARC.
0 The sound mode cannot be set if the input mode is set to “7.1CH IN”.
Front panel
Appendix
Display
Rear panel
177
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Speakers
The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called
“Audyssey® Setup”.
You do not have to perform Audyssey® Setup when you have already performed “Speaker Calibration” in “Setup Assistant”.
To set up the speakers manually, use “Manual Setup” on the menu. (v p. 189)
Audyssey® Setup
To perform measurement, place the Sound calibration microphone in
multiple locations all around the listening area. For best results, we
recommend you measure in six or more positions, as shown in the
illustration (up to eight positions).
When measuring the second and subsequent positions, install the Sound
calibration microphone within 2 ft (60 cm) of the first measurement position
(main listening position).
FL SW C
(
If you perform the Audyssey® Setup, the Audyssey MultEQ® XT / Audyssey Dynamic
EQ® / Audyssey Dynamic Volume® functions are enabled. (v p. 158 – 159)
FL Front speaker (L)
FR Front speaker (R)
C Center speaker
SW Subwoofer
SL Surround speaker (L)
SR Surround speaker (R)
:Measuring positions)
Listening position
SR
.
SL
FR
Front panel
Display
Rear panel
178
Remote
Index
Contents
Connections
Playback
Settings
o About the main listening position
Display
Appendix
NOTE
The main listening position is the position where listeners would
normally sit or where one would normally sit alone within the listening
environment. Before starting Audyssey® Setup, place the Sound
calibration microphone in the main listening position.
Audyssey MultEQ® XT uses the measurements from this position to
calculate speaker distance, level, polarity, and the optimum crossover
value for the subwoofer.
Front panel
Tips
Rear panel
0 Make the room as quiet as possible. Background noise can disrupt the room
measurements. Close windows and turn off the power on electronic devices
(radios, air conditioners, fluorescent lights, etc.). The measurements could be
affected by the sounds emitted by such devices.
0 During the measurement process, place cell phones outside the listening room.
Cell phone signals could disrupt the measurements.
0 Do not stand between the speakers and Sound calibration microphone or allow
obstacles in the path while the measurements are being made. Also, install the
Sound calibration microphone at least 20 inches (50 cm) away from the wall.
Failure to do so will result in inaccurate readings.
0 During the measurement process, audible test tones will come from the speakers
and subwoofer(s), but this is part of normal operation. If there is background noise
in the room, these test signals will increase in volume.
0 Operating VOLUME d f on the remote control unit or VOLUME on the main unit
during the measurements will cancel the measurements.
0 Measurement cannot be performed when headphones are connected. Unplug the
headphones before performing Audyssey® Setup.
179
Remote
Index
Contents
Connections
Playback
Settings
Procedure for speaker settings
(Audyssey® Setup)
1
Tips
Appendix
Attach the Sound calibration microphone to the
supplied 3-legged stand or enclosed stand and install it
at the main listening position.
When installing the Sound calibration microphone, point the tip of
the microphone toward the ceiling and adjust the height to match the
height of the ears of a listener in a seated position.
Preparation
2
Measurement
If using a subwoofer capable of the following
adjustments, set up the subwoofer as shown below.
n When using a subwoofer with a direct mode
Set the direct mode to “On” and disable the volume adjustment
and crossover frequency setting.
Calculation & Store
n When using a subwoofer without a direct mode
Make the following settings:
0 Volume : 12 o’clock position
0 Crossover frequency : Maximum/Highest Frequency
0 Low pass filter : Off
0 Standby mode : Off
Check
.
Finish
Front panel
Display
Rear panel
180
Remote
Index
Contents
Playback
Settings
4
Connect the Sound calibration microphone to the
SETUP MIC jack of this unit.
When the Sound calibration microphone is
connected, the following screen is displayed.
5
.
Tips
Select “Start”, then press ENTER.
Follow the instructions on the screen display and press
“Next” to proceed further.
Audyssey Setup
Your AV receiver can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone and microphone stand.
Set the following items
if necessary.
Amp Assign
Channel Select
Check Results
Restore...
Start
Front panel
Display
Rear panel
181
Appendix
Audyssey® Setup can also make the following settings.
0 Amp Assign
The signals output from the SURROUND BACK speaker
terminals can be switched in accordance with your speaker
environment. (“Amp Assign” (v p. 188))
0 Channel Select
If channels that are not to be used are set in advance,
measurement for the set channels is skipped, and measuring
time can be reduced. You can also change the number of
surround back speakers and subwoofer.
.
3
Connections
Remote
Index
Contents
Playback
Settings
7
When the following screen is displayed, select “Begin
Test” and then press ENTER.
Start the measurement of the first position.
Tips
Appendix
When the detected speaker is displayed, select “Next”
and then press ENTER.
Audyssey Setup
Speaker Detection
Audyssey Setup
Select “Begin Test” to start the calibration.
NOTE: You will hear a series of loud chirps starting and stopping
during the tests.
Front
Center
Subwoofer
Surround
Ear Height
:Yes
:Yes
:Yes
:Yes
Next
.
Repeat Last Test
Back
Begin Test
.
6
Connections
0 Measurement requires several minutes.
NOTE
If “Caution!” is displayed on TV screen:
Go to “Error messages” (v p. 186). Check any related items, and perform
the necessary procedures.
Front panel
Display
Rear panel
182
Remote
Index
Contents
Playback
Settings
9
10
Move the Sound calibration microphone to position 2,
select “Continue”, then press ENTER.
The measurement of the second position starts.
Measurements can be made in up to eight positions.
Tips
Appendix
Repeat step 8, measuring positions 3 to 8.
Select “Complete”, then press ENTER.
Audyssey Setup
Measurements complete.
Select Continue to analyze the data...
Audyssey Setup
Place the microphone ear level at the 2nd listening position,
which should be no more than 2 ft (60cm) away from the 1st
position, then select “Continue”...
Ear Height
Repeat Last Test
Continue
.
Back
Complete
Continue
Start the analysis and storage of the measurement results.
0 Analysis takes several minutes to complete.
The more speakers and measurement positions that there are,
the more time it takes to perform the analysis.
.
8
Connections
To skip measuring the second and subsequent listening position, press o to
select “Complete” and press ENTER to proceed to step 11.
n Stopping Audyssey® Setup
NOTE
When the measurement results are being saved, make sure the power is not
turned off.
A Press BACK to display the popup screen.
B Press o to select “Yes”, then press ENTER.
Front panel
Display
Rear panel
183
Remote
Index
Contents
11
Connections
Playback
Settings
12
Perform the settings for Audyssey Dynamic EQ® and
Audyssey Dynamic Volume®.
The following screen is displayed during the analysis. Configure the
settings as preferred.
Tips
Appendix
When the analysis and storage ends, unplug the Sound
calibration microphone from the SETUP MIC jack on the
main unit and then press “Next”.
Audyssey Setup
Now Analyzing and correcting the your room data.
Please disconnect the microphone from your AV receiver.
Audyssey Setup
Audyssey Dynamic EQ maintains bass, clarity and surround
sound at low volumes letting you enjoy late-night movies
and television.
Turn on the Dynamic EQ?
Yes
No
Applying room corrections
100%
Analyzing room data
Back
Next
.
.
50%
0 Dynamic EQ corrects the frequency response in consideration of
the audio characteristics of the room and human hearing ability so
that sound can be heard even at low volume.
This is recommended when using the unit with the volume turned
down, e.g. when enjoying a movie or TV program in the middle of
the night.
0 Dynamic Volume adjusts the output volume to the optimal level
while constantly monitoring the level of the audio input to the unit.
Optimal volume control is performed automatically without any
loss in the dynamism and clarity of the sound when, for example,
the volume suddenly increases for commercials shown during
television programs.
Front panel
Display
Rear panel
184
Remote
Index
Contents
13
Connections
Playback
Settings
Tips
Select “Details” and press ENTER to verify the
measurement results.
0 Subwoofers may measure a greater reported distance than the
actual distance due to added electrical delay common in
subwoofers.
NOTE
Do not change the speaker connection or subwoofer volume after Audyssey® Setup.
If these are changed, run Audyssey® Setup again in order to configure the optimum
equalizer settings.
Front panel
Display
Rear panel
185
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Error messages
An error message is displayed if Audyssey® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error
message is displayed, check the relevant items and perform the necessary measures. Be sure to turn off the power before checking speaker connections.
Examples
Error details
No speakers found.
Measures
0 Sound calibration microphone is not
0 Connect the included Sound calibration microphone to the
0 Not all speakers could be detected.
0 Check the speaker connections.
detected.
Ambient noise is too high or level is too 0 There is too much noise in the room.
low
0 Speaker or subwoofer sound is too low.
SETUP MIC jack of this unit.
0 Either turn off any device generating noise or move it away.
0 Perform again when the surroundings are quieter.
0 Check the speaker installation and the direction in which the
speakers are facing.
0 Adjust the subwoofer’s volume.
Front R : None
0 The displayed speaker could not be
Front R : Phase
0 The displayed speaker is connected with the
detected.
polarity reversed.
0 Check the connections of the displayed speaker.
0 Check the polarity of the displayed speaker.
0 For some speakers, this error message may be displayed
even if the speaker is properly connected. If you are sure the
connection is correct, press p to select “Ignore”, then press
ENTER.
Front panel
Display
Rear panel
186
Remote
Index
Contents
Connections
Playback
Settings
Tips
Retrieving Audyssey® Setup settings
If you set “Restore...” to “Restore”, you can return to Audyssey® Setup
measurement result (value calculated at the start by MultEQ® XT) even
when you have changed each setting manually.
Audyssey Setup
Your AV receiver can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone and microphone stand.
Set the following items
if necessary.
Amp Assign
Channel Select
Check Results
Restore...
.
Start
Front panel
Display
Rear panel
187
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Manual Setup
Appendix
Amp Assign
Select power amplifier usage method to match your speaker system.
See “Speaker configuration andAmp Assignsettings” (v p. 31) regarding
the speaker configuration and connection.
Perform when setting the speakers manually or when changing settings
made in Audyssey® Setup.
0 If you change the speaker settings after performing Audyssey® Setup,
you will no longer be able to select Audyssey MultEQ® XT, Audyssey
Dynamic EQ® or Audyssey Dynamic Volume®. (v p. 158 – 159)
0 “Manual Setup” can be used without changing the settings. Please set if
necessary.
Front panel
Tips
Display
Rear panel
o Assign Mode
Select how to use the power amp.
188
Surround Back:
Setting for 7.1-channel playback using
surround back speakers.
ZONE2
(Default):
Setting to assign the unit’s built-in power
amplifier for ZONE2 and output the audio
in stereo.
Bi-Amp:
Setting to use the front speakers via the
bi-amp connection.
Front B:
Setting for playback using a second front
speaker. You can switch the playback
between front speaker A and B according
to your liking. Switch the front speaker
using “Front Speaker” in the menu.
(v p. 195)
Front Height:
Setting for 7.1-channel playback using
front height speakers.
Remote
Index
Contents
Connections
Playback
Settings
Appendix
o Subwoofer
Speaker Config.
Set the presence of a subwoofer.
Select whether or not speakers are present, playback capacity for low
bass frequencies and speaker size.
o Front
Set the front speaker size.
Large
(Default):
Use a large speaker that can adequately
play back very low bass frequencies.
Small:
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when a center speaker is not
connected.
Display
Rear panel
No:
Select when a subwoofer is not
connected.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the surround speakers are
not connected.
When “Surround” is set to “None”, “Surr. Back” and “Front Height” are
automatically set to “None”.
Set the presence and size of the center speaker.
Use a large speaker that can adequately
play back very low bass frequencies.
Use a subwoofer.
Set the presence and size of the surround speakers.
o Center
Large:
Yes
(Default):
o Surround
0 When “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.
0 When “Front” is set to “Small”, “Center”, “Surround”, “Surr. Back” and “Front
Height” can not be set to “Large”.
Front panel
Tips
189
Remote
Index
Contents
Connections
Playback
Settings
o Surr. Back
Tips
Appendix
o Front Height
Set the presence, size and number of surround back speakers.
Set the presence and size of the front height speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the surround back speakers
are not connected.
None:
Select when the front height speakers are
not connected.
2 spkrs
(Default):
Use two surround back speakers.
1 spkr:
Use only one surround back speaker.
Connect to the L terminal to SURROUND
BACK when this setting is selected.
When “Assign Mode” setting is “Front Height”, you can make this setting.
(v p. 188)
When “Assign Mode” setting is “Surround Back”, you can make this setting.
(v p. 188)
Front panel
Display
Rear panel
190
Remote
Index
Contents
Connections
Playback
Settings
Tips
o Set the distance
Distances
0.0 ft – 60.0 ft / 0.00 m – 18.00 m
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each
speaker.
0 The speakers that can be selected differ depending on the “Amp Assign” and
“Speaker Config.” settings. (v p. 188, 189)
0 Default settings :
Front L / Front R / F. Height L / F. Height R / Center / Subwoofer:12.0 ft (3.60
m)
Surround L / Surround R / Surr. Back L / Surr. Back R:10.0 ft (3.00 m)
0 Set the difference in the distance between the speakers to less than 20.0 ft
(6.00 m).
o Unit
Set the unit of distance.
Feet (Default)
Meters
o Step
Set the minimum variable width of the distance.
1 ft (Default) / 0.1 ft
0.1 m / 0.01 m
o Set Defaults
The “Distances” settings are returned to the default settings.
Front panel
Appendix
Display
Rear panel
191
Remote
Index
Contents
Connections
Playback
Settings
Tips
Levels
Set the volume of the test tone to be the same at the listening position
when it is output from each speaker.
o Test Tone Start
A test tone is output from the selected speaker.
While listening to the test tone, adjust the volume output from the
selected speaker.
–12.0 dB – +12.0 dB (Default : 0.0 dB)
0 The set “Levels” are reflected in all sound modes.
0 If you wish to adjust the channel level for each input source, carry out the
settings in “Channel Level Adjust” (v p. 113).
0 When headphones are connected to the PHONES connector on this unit, you
cannot set “Levels”.
o Set Defaults
The “Levels” settings are returned to the default settings.
Front panel
Display
Rear panel
192
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
o Set the crossover frequency
Crossovers
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /
200 Hz / 250 Hz (Default : 80 Hz)
Set in accordance with the lower limit frequency of the base frequencies
that can be played back through each speaker. See the speaker manual
for information concerning speaker crossover frequency.
o Speaker Selection
0 “Crossovers” can be set when the “Subwoofer Mode” setting is “LFE+Main”, or
when you have a speaker that is set to “Small”. (v p. 194)
0 The default crossover frequency is “80 Hz”, which will work best with the
widest variety of speakers. We recommend setting to a higher frequency that
the crossover frequency when small speakers are used. For example, set to
“250 Hz” when the frequency range of the speakers is 250 Hz – 20 kHz.
0 Sound below the crossover frequency is cut off from the output of the
speakers set in “Small”. This cut off bass frequency is output from the
subwoofer or front speakers.
0 The speakers that can be set when “Individual” is selected differ depending on
to the “Subwoofer Mode” setting. (v p. 194)
Selects how to set the crossover frequency.
All
(Default):
Sets the same crossover frequency for all
speakers.
Individual:
Selects the crossover points for each
speaker individually.
0 When “LFE” is selected, speakers set to “Small” at “Speaker Config.” can be
set. If the speakers are set to “Large”, “Full Band” is displayed and the
setting cannot be made. (v p. 189)
0 When “LFE+Main” is selected, speakers can be set regardless of the
“Speaker Config.” setting. (v p. 189)
Front panel
Display
Rear panel
193
Remote
Index
Contents
Connections
Playback
Settings
Tips
o LPF for LFE
Bass
Set LFE signal playback range. Set this when you want to change the
playback frequency (low pass filter point) of the subwoofer.
Set subwoofer and LFE signal range playback.
80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 200 Hz / 250 Hz
(Default : 120 Hz)
o Subwoofer Mode
Select low range signals to be reproduced by subwoofer.
LFE
(Default):
The low range signal of the channel set to
“Small” speaker size is added to the LFE
signal output from the subwoofer.
LFE+Main:
The low range signal of all channels is
added to the LFE signal output from the
subwoofer.
0 “Subwoofer Mode” can be set when “Speaker Config.” - “Subwoofer” is set to
other than “No”. (v p. 189)
0 Play music or a movie source and select the mode offering the strongest bass.
0 If “Speaker Config.” - “Front” and “Center” are set to “Large”, and “Subwoofer
Mode” is set to “LFE”, no sound may be output from the subwoofers,
depending on the input signal or selected sound mode. Select “LFE+Main” if
you want the bass signals to always be produced from the subwoofer.
(v p. 189)
Front panel
Appendix
Display
Rear panel
194
Remote
Index
Contents
Connections
Playback
Settings
Tips
Front Speaker
Set the front speaker A/B to use for every sound mode.
A
(Default):
Front speaker A is used.
B:
Front speaker B is used.
A+B :
Both front speakers A and B are used.
This can be set when “Assign Mode” is set to “Front B”. (v p. 188)
Front panel
Display
Rear panel
195
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Network
To use this unit by connecting it to a home network (LAN), you must configure network settings.
If you set up your home network (LAN) via DHCP, set “DHCP” to “On”. (Use the default setting.) This allows this unit to use your home network (LAN).
When assigning an IP address to each device manually, you need to assign an IP address to this unit using the “IP Address” settings, and enter
information about your home network (LAN) such as the gateway address and subnet mask, etc.
Connection
Information
Display network information.
Friendly Name / Connection / SSID / DHCP / IP Address /
MAC Address
Choose whether to connect the home network to a wireless LAN or a
wired LAN.
When connecting to the network using wired LAN, select “Wired
(Ethernet)” after connecting a LAN cable,
When connecting to the network using wireless LAN, select “Wireless (WiFi)” and configure the “Wi-Fi Setup”.
MAC Address is required to create a vTuner account.
o Connect Using
Select the method for connecting to the home network (LAN).
Wired (Ethernet): Use a LAN cable to connect to a network.
Wireless (Wi-Fi):
Front panel
Display
Rear panel
196
Remote
Use the wireless LAN (Wi-Fi) function to connect
to a network.
Index
Contents
Connections
Playback
Settings
Appendix
n When connecting using Wi-Fi
Wi-Fi Setup
1. Select “Wireless connection” on the TV screen.
2. Check that your iOS device is connected to the wireless LAN
(Wi-Fi) router and select “Marantz SR5009” from “SET UP NEW
AIRPLAY SPEAKER...” at the bottom of the Wi-Fi configuration
screen of your iOS device.
3. Tap “Next” on the screen of the iOS device.
Connect to a wireless LAN (Wi-Fi) router.
The router can be connected in the following ways. Select the connection
method to suit your home environment.
o Scan Networks
Select the network you wish to connect to from the list of possible
networks shown on the TV screen.
The iOS device firmware version needs to support iOS7 or later.
1. Select the network you wish to connect to from the list of wireless
networks.
Select “Rescan” if the network cannot be found.
2. Enter your password and select “OK”.
n When using a USB cable
1. Select “USB cable” on the TV screen.
2. Check that your iOS device is connected to the wireless LAN
(Wi-Fi) and connect it to the USB port on the front panel using a
USB cable.
3. Select “Connect” on the TV screen.
4. Tap “Allow” when the connection message appears on the
screen of your iOS device.
o Use iOS Device
Use your iOS device (iPhone/iPod/iPad) to connect to the network. By
connecting your iOS device to this unit, the unit can be automatically
connected to the same network as your device.
This unit can be connected to your iOS device in two ways, using a
USB cable and using Wi-Fi.
Front panel
Tips
Display
Rear panel
The iOS device firmware version needs to support iOS5 or later.
197
Remote
Index
Contents
Connections
Playback
Settings
o WPS Router
Tips
Appendix
o Manual
Use a WPS-compatible router to connect.
There are two ways to connect, using the push button method or the
PIN code method. Select the connection method to match your router.
Enter the name (SSID) and password of the network you wish to
connect to.
1. Set the following items.
n When connecting using the push button method
1. Select “Push Button” on the TV screen.
2. Switch to the WPS mode by pressing the WPS button of the
router you wish to connect to.
0 The time for pressing the button varies depending on the
router.
3. Select “Connect” on the TV screen within 2 minutes.
SSID:
Input the name of the wireless network (SSID).
Security:
Select the encryption method according to the
encryption setting of the access point you are using.
Password:
Input the password.
Select the Default Key.
Default Key: When connecting to a “WEP” encrypted network,
“Default Key” menu is displayed.
n When connecting using the PIN code method
2. Select “Connect” at the end of the setting.
1. Select “PIN” on the TV screen.
2. Select the network you wish to connect to from the list of
wireless networks.
This displays the PIN code of the unit on the TV screen.
3. Register the PIN code of the unit in the router.
The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or
tablet that supports wireless LAN connection.
When using a device that has a firmware version of iOS7 or later, “When connecting
using Wi-Fi” (v p. 197) in “Use iOS Device”.
1. Press and hold the ZONE2 SOURCE and TUNER PRESET CH + buttons on the
main unit for at least 3 seconds when the power of the unit is on.
2. Connect the wireless LAN of the PC or tablet used to “Marantz SR5009” when the
message “Connect your Wi-Fi device to Wi-Fi network called “Marantz SR5009””
appears in the display.
3. Start up the browser and enter “192.168.1.16” in the URL.
4. Use the browser to enter the settings, select “Connect” and then exit the settings.
Front panel
Display
Rear panel
198
Remote
Index
Contents
Connections
Playback
Settings
Tips
o IP Address
Settings
Set the IP address within the ranges shown below.
Configure the proxy settings and IP address.
0 If you are using a broadband router (DHCP function), the information
required for network connection such as the IP address will be
automatically configured since the DHCP function is set to “On” in the
default settings of this unit.
0 Set up the IP Address, Subnet Mask, Default Gateway and DNS server
information only when assigning a fixed IP address or when connecting
to a network without DHCP function.
0 Configure the proxy settings when using a proxy server to connect to
the Internet.
0 The Network Audio function cannot be used if other IP addresses
are set.
CLASS A:10.0.0.1 - 10.255.255.254
CLASS B:172.16.0.1 - 172.31.255.254
CLASS C:192.168.0.1 - 192.168.255.254
o Subnet Mask
When connecting an xDSL modem or connector adapter directly to
this unit, input the subnet mask indicated in the documentation
supplied by your provider. Normally input 255.255.255.0.
o Default Gateway
Network/Settings
When connected to a gateway (router), input its IP address.
DHCP
Off
-IP Address
192.168.000.001
255.255.255.000
-Subnet Mask
-Default Gateway
255.255.255.000
-Primary DNS
000.000.000.000
-Secondary DNS
000.000.000.000
Proxy
Off
-Address
000.000.000.000
-Port
00000
Save
Cancel
Configures the network settings manually
o Primary DNS, Secondary DNS
.
If there is only one DNS address indicated in the documentation
supplied by your provider, input it at “Primary DNS”. If two or more
DNS are provided by your provider, enter both “Primary DNS” and
“Secondary DNS”.
o DHCP
Selects how to connect to the network.
On
(Default):
Configure the network settings
automatically from your router.
Off:
Configure the network settings manually.
Front panel
Appendix
Display
Rear panel
199
Remote
Index
Contents
Connections
Playback
Settings
o Proxy
Select when inputting by address.
On(Name):
Select when inputting by domain name.
Off
(Default):
Disables the proxy server.
Appendix
IP Control
Make this setting when connecting to the Internet via a proxy server.
Make the proxy settings only when you connect to the Internet via a
proxy server that is on your internal network or provided by your
provider, etc.
On(Address):
Tips
Enables network communication in standby power mode.
Off In Standby:
Suspend network function during standby.
Always On
(Default):
Network is on during standby. Main unit
operable with a network compatible
controller.
When using the web control function or Marantz Remote App, use with the “IP
Control” setting set to “Always On”.
o Port
Enter port number.
NOTE
When “IP Control” is set to “Always On”, it consumes more standby power.
0 If you cannot connect to the Internet, recheck the connections and settings.
(v p. 52)
0 If you do not understand about Internet connection, contact your ISP (Internet
Service Provider) or the store from which you purchased your computer.
Front panel
Display
Rear panel
200
Remote
Index
Contents
Connections
Playback
Settings
Friendly Name
Tips
Appendix
Diagnostics
The Friendly Name is the name of this unit displayed on the network. You
can change the Friendly Name according to your preferences.
Used to check the network connection.
o Physical Connection
o Friendly Name
Checks the physical LAN port connection.
Selects Friendly Name from the list.
When you select “Other”, you can change the Friendly Name
according to your preferences.
OK
Error: The LAN cable is not connected. Check the connection.
Home Theater / Living Room / Family Room / Guest Room /
Kitchen / Dining Room / Master Bedroom / Bedroom / Den /
Office / Other
When connected using a wireless LAN, “Connection Wireless (Wi-Fi)” will be
displayed.
o Router Access
Checks the connection from this unit to the router.
0 Up to 63 characters can be input.
For character input, see “Using the keyboard screen” (v p. 150).
0 The default Friendly Name on first use is “Marantz SR5009”.
OK
o Set Defaults
Error:
Restores Friendly Name, which you had changed, to the default
setting.
Failed to communicate with the router. Check the router
settings.
o Internet Access
Checks whether this unit has access to the Internet (WAN).
OK
Error:
Front panel
Display
Rear panel
201
Failed to connect to the Internet. Check the Internet connection
environment or router settings.
Remote
Index
Contents
Connections
Playback
Settings
Tips
Maintenance Mode
Use when receiving maintenance from a Marantz service engineer or
custom installer. Ordinarily, this mode isn’t suitable for use by the end
user, only by a trained service technician or custom installation
professional.
NOTE
Only use this function if so instructed by a Marantz serviceperson or installer.
Front panel
Display
Rear panel
202
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
General
Make various other settings.
Language
ECO
Set the language for display the menu on the TV screen.
Configure the settings of the ECO Mode and auto standby mode.
English / Français / Español (Default : English)
o ECO Mode
This can reduce the power consumption when the power of the unit is
on.
“Language” can also be set up by the following operation. However, the menu screen
is not displayed. Watch the display while configuring the settings.
1. Press and hold the main unit’s ZONE2 SOURCE and STATUS for at least 3
seconds.
“Video Format <NTSC>” appears on the display.
2. Press the main unit’s DIMMER.
“GUI Language ENGLISH” appears on the display.
3. Use the main unit’s TUNER PRESET CH + or TUNER PRESET CH - and set the
language.
4. Press the main unit’s STATUS to complete the setting.
Front panel
Display
Rear panel
On:
Reduce the power consumption.
Auto:
The power consumption is automatically
reduced to match the volume.
Off
(Default):
Do not reduce the power consumption.
0 When you want to output audio at a high volume level, it is recommended to
set “ECO Mode” to “Off”.
0 Eco mode can also be switched by pressing ECO G on the remote control
unit.
203
Remote
Index
Contents
Connections
Playback
Settings
o Power On Default
Tips
Appendix
o Auto Standby
Set the mode to ECO when the power is on.
Set so the unit power automatically switches to standby.
Last
(Default) :
The ECO Mode will be set to the previous
setting before the power was switched off.
n MAIN ZONE
On:
When power is turned on, the mode will
always be switched to the ECO Mode in
“On”.
Auto:
When power is turned on, the mode will
always be switched to the ECO Mode in
“Auto”.
Off:
Sets the time for switching to auto standby when there are no audio or
video signals input into this unit.
Before the unit enters standby mode, “Auto Standby” is displayed on
the unit display and the menu screen.
When power is turned on, the mode will
always be switched to the ECO Mode in
“Off”.
o On Screen Display
Always display the meter on the TV screen.
Auto
(Default):
Display the meter when changing the mode
or volume.
Off:
Do not display the meter.
Front panel
Display
Rear panel
The unit goes into standby after 60 minutes.
30 min:
The unit goes into standby after 30 minutes.
15 min:
The unit goes into standby after 15 minutes.
Off
(Default):
The unit does not go into standby
automatically.
n ZONE2
Display the power consumption of this unit using a meter on the TV
screen.
Always On:
60 min:
When there are no operations for a certain period of time as set here,
the power is automatically shut off even if there is audio or video input.
204
8 hours:
Put ZONE2 in the standby state after about 8
hours.
4 hours:
Put ZONE2 in the standby state after about 4
hours.
2 hours:
Put ZONE2 in the standby state after about 2
hours.
Off
(Default):
Do not automatically put ZONE2 in the
standby state.
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Volume Limit
ZONE2 Setup
Make a setting for maximum volume.
Configure the settings for audio playback on ZONE2.
60 (-20 dB) / 70 (-10 dB) / 80 (0 dB)
(Default : 70 (-10 dB))
Off:
Values set for “Volume Limit” and “Power On Volume” are displayed according to the
setting specified for the volume “Scale” (v p. 157).
o Lch Level
Do not set a maximum volume.
This can be set when “Volume Level” is set to “Variable”. (v p. 205)
Adjust the left channel output level.
o Power On Volume
-12 dB – +12 dB (Default : 0 dB)
Define the volume setting that is active when the power is turned on.
o Rch Level
Adjust the right channel output level.
-12 dB – +12 dB (Default : 0 dB)
Last
(Default):
Use the memorized setting from the last
session.
Mute:
Always use the muting on condition.
1 – 98
The volume is adjusted to the set level.
(–79.5 dB – 18.0 dB):
o Volume Level
Set the volume output level.
Variable
(Default):
This can be set when “Volume Level” is set to “Variable”. (v p. 205)
Volume can be adjusted.
Volume is fixed at the desired level. The
1 – 98
volume cannot be adjusting using the remote
(–79.5 dB – 18.0 dB):
control unit.
Front panel
Display
Rear panel
205
Remote
Index
Contents
Connections
Playback
Settings
o Mute Level
Tips
Appendix
Zone Rename
Set the amount of attenuation when muting is on.
Change the display title of each zone to one you prefer.
Full
(Default):
The sound is muted entirely.
–40 dB :
The sound is attenuated by 40 dB down.
–20 dB :
The sound is attenuated by 20 dB down.
MAIN ZONE / ZONE2
Set Defaults: The default setting is restored for the edited zone name.
Up to 10 characters can be input.
For character input, see “Using the keyboard screen” (v p. 150).
This can be set when “Volume Level” is set to “Variable”. (v p. 205)
Smart Select Names
Change the smart select name that appears on the TV screen to one you
prefer.
Smart Select 1 / Smart Select 2 / Smart Select 3 / Smart Select 4
Set Defaults:
The default setting is restored for the edited smart select
name.
Up to 16 characters can be input.
For character input, see “Using the keyboard screen” (v p. 150).
Front panel
Display
Rear panel
206
Remote
Index
Contents
Connections
Playback
Settings
Trigger Out
Appendix
Front Display
Select the conditions for activating trigger out.
For details about how to connect the TRIGGER OUT jacks, see “DC OUT
jack” (v p. 55).
Makes settings related to the display on this unit.
o Dimmer
n When setting for zone (MAIN ZONE/ZONE2)
Adjust the display brightness of this unit.
Trigger out is activated through linkage to the power of the zone set to
“On”.
n When setting for input source
Trigger out is activated through linkage to the power of the zone set to
“On”.
It is valid for the zone, which is set to “On” and “When setting for zone”.
On:
Activate trigger on this mode.
– – –:
Do not activate trigger on this mode.
Front panel
Tips
Display
Rear panel
Bright
(Default):
Normal display brightness.
Dim:
Reduced display brightness.
Dark:
Very low display brightness.
Off:
Turns the display off.
You can also adjust the display by pressing DIMMER on the main unit.
207
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Video
Information
Show information about this unit settings, input signals, etc.
Show the HDMI input/output signals and HDMI monitor information for
MAIN ZONE.
o Audio
HDMI Signal Info.
Show the audio information for MAIN ZONE.
Resolution / Color Space / Pixel Depth
Sound Mode: The currently set sound mode.
HDMI Monitor 1 / HDMI Monitor 2
Input Signal: The input signal type.
Interface / Resolutions
Format:
The number of input signal channels (presence of
front, surround, LFE).
o ZONE
Sample Rate: The input signal’s sampling frequency.
Offset:
The dialogue normalization correction value.
Flag:
This is displayed when inputting signals including a
surround back channel. “MATRIX” is displayed with
Dolby Digital EX and DTS-ES Matrix signals,
“DISCRETE” with DTS-ES Discrete signals.
Show information about current settings.
MAIN ZONE:
This item shows information about
settings for MAIN ZONE. The information
displayed differs according to the input
source.
ZONE2:
This item shows information about
settings for ZONE2.
o Firmware
Version:
Front panel
Display
Rear panel
208
Displays information for the current firmware.
Remote
Index
Contents
Connections
Playback
Settings
o Notifications
To help us improve our products and customer service, Marantz collects
anonymous information about how you use your AV receiver (such as
frequently used input sources and sound modes and speaker settings).
Marantz will never provide any information we collect to third parties.
Notification Alerts
Notification messages are displayed.
Off:
Notification messages are not displayed.
Yes: Provide information on the operating status of this unit.
No:
Do not provide information on the operating status of this unit.
Press INFO on the remote control unit to display current source name, volume,
sound mode name, and other information at the bottom of the screen.
SOURCE
SOUND
SIGNAL
AUDYSSEY
Blu-ray
DOLBY TrueHD
DOLBY TrueHD
MultEQ XT : Reference
Dynamic EQ : On
Dynamic Volume : Medium
INPUT SIGNAL
FWL
SL
FHL
EXT
FL
C
LFE
FR
SBL
SB
SBR
ACTIVE SPEAKERS
FHR
FWR
SR
FL
SL
SBL
C
SW
FR
SR
SBR
.
50.0
NOTE
The status display screen cannot be displayed when playing the following video
signals.
0 Computer resolution video
0 Video with an aspect ratio other than 16:9 or 4:3
0 4K (60/50 Hz) video
Front panel
Display
Rear panel
Appendix
Usage Data
Displays and sets notifications.
Also, sets whether or not to display the notification when the power is
turned on.
On
(Default):
Tips
209
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Notifications
Firmware
Checks for the latest firmware information about updates and upgrades,
updates the firmware, and sets up the notification message display for
updates and upgrades.
When the latest firmware is available, a notification message is
displayed on the TV screen at power on.
The notification message is displayed for about 40 seconds when the
power is turned on.
o Update
Update
Updates the firmware of this unit.
Check for
Update:
Checks to see if the firmware is the latest version. You
can also check approximately how long it will take to
complete an update.
Update
Start:
Execute the update process. When the update starts,
the menu screen is shut down. During the update, the
progress is shown on the display.
On
(Default):
Display update message.
Off:
Do not display update message.
Upgrade
On
(Default):
Display upgrade message.
Off:
Do not display upgrade message.
This unit automatically retries updating if updating fails. If the update still fails,
either one of the following messages will appear on the screen. If the display
reads as shown below, check the settings and network environment, then update
again.
Display
Description
Updating fail
Updating failed.
Login failed
Failure to log into server.
Server is busy
Server is busy. Wait a while then try again.
Connection fail
Failure in connecting to server.
Download fail
Downloading of the firmware has failed.
Front panel
Display
Rear panel
210
Remote
Index
Contents
Connections
Playback
Settings
o Add New Feature
Appendix
Notes concerning use of “Update” and “Add New Feature”
Display new features that can be downloaded to this unit and perform
an upgrade.
Upgrade
Package:
Display the items to be upgraded.
Upgrade
Status:
Display a list of the additional functions provided by
the upgrade.
Upgrade Start:
Execute the upgrade process.
When the upgrade starts, the menu screen is shut
down. During the upgrade, the amount of upgrade
time which has elapsed is displayed.
0 In order to use these functions, you must have the correct system
requirements and settings for an Internet connection. (v p. 52)
0 Do not turn off the power until updating or upgrading is completed.
0 Approximately 1 hour is required for the updating/upgrading procedure
to be completed.
0 Once updating/upgrade starts, normal operations on this unit cannot
be performed until updating/upgrading is completed. Furthermore,
there may be cases where backup data is reset for the parameters,
etc., set on this unit.
0 If the update or upgrade fails, press and hold the X on the main unit for
more than 5 seconds, or remove and re-insert the power cord. “Update
Retry” appears on the display and update restarts from the point at
which update failed. If the error continues despite this, check the
network environment.
0 See the Marantz website for details about upgrades.
0 When the procedure is complete, “Registered” is displayed in this menu and
upgrades can be carried out. If the procedure has not been carried out, “-------”
is displayed.
The ID number shown on this screen is needed when carrying out the
procedure.
The ID number can also be displayed by pressing and holding the main unit’s
STATUS and SOUND MODE for at least 3 seconds.
0 If the upgrade is not successful, an error message identical to those in
“Firmware” - “Update” will appear on the display. Check the settings and
network environment and then perform the upgrade again.
Front panel
Tips
Display
Rear panel
Information regarding the “Update” function and “Add New Feature” will be
announced on the Marantz web site each time related plans are defined.
211
Remote
Index
Contents
Connections
Playback
Settings
Tips
Setup Lock
Protect settings from inadvertent changes.
o Lock
On:
Turn protection on.
Off
(Default):
Turn protection off.
When cancelling the setting, set “Lock” to “Off”.
NOTE
When “Lock” is set to “On”, no setting items are displayed except for “Setup
Lock”.
Front panel
Display
Rear panel
212
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Limiting the operating zone with the remote control
ZONE2 operations can be disabled using the remote control.
ZONE SELECT
ZONE2
MAIN
SLEEP
ZONE 2
CBL/SAT
1
POWER
DVD
Blu-ray
MEDIA
PLAYER
GAME
AUX1
TV AUDIO
AUX2
TUNER
iPod/USB
CD
Bluetooth
ONLINE
MUSIC
Press and hold ZONE2 and SETUP.
The MAIN and ZONE2 buttons blink.
o Canceling the settings
1
INTERNET
RADIO
ECO
Press and hold ZONE2 and SETUP while configuring
the setting.
The MAIN and ZONE2 buttons blink and the setting is canceled.
CH / PAGE
VOLUME
MUTE
INFO
OPTION
ENTER
SETUP
BACK
SETUP
TUNE
-
TUNE
+
SMART SELECT
1
3
4
PURE
.
MOVIE
2
SOUND MODE
MUSIC
GAME
Front panel
Display
Rear panel
213
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Contents
Troubleshooting
Tips
Power does not turn on / Power is turned off
218
Operations cannot be performed through the remote control unit
219
Display on this unit shows nothing
219
No sound comes out
220
Desired sound does not come out
221
Sound is interrupted or noise occurs
223
224
I want the volume not to become too loud by mistake
215
I want to keep the volume at the same level when I turn the power on
215
I want to have the subwoofer always output audio
215
I want to make human voices in the movies clearer
215
I want to keep bass and clarity during playback at a lower volume
level
215
No video is shown on the TV
I want to automatically adjust the volume level difference in content
such as TV and movies
The menu screen is not displayed on the TV
225
215
iPod cannot be played back
226
USB memory devices cannot be played back
227
File names on the iPod/USB memory device are not displayed
properly
228
Bluetooth cannot be played back
228
I want to set the optimized listening environment after changing the
configuration/position of the speakers or changing a speaker to a new
one
216
I want to combine a desired video with the current music
216
I want to play back photos from Flickr at the same time while listening
to the Internet radio
216
I want to delete unused input sources
216
I want to enjoy the same music in all zones at the home party, etc.
216
I want to minimize the delay in video signals when I’m playing a game
on my game console
216
Front panel
Display
Rear panel
214
The Internet radio cannot be played back
229
Music files on PC or NAS cannot be played back
230
Various online services cannot be played
230
The HDMI control function does not work
231
When it is not possible to connect to a wireless LAN network
232
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Tips
I want the volume not to become too loud by mistake
0 Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake.
You can set this for each zone. (v p. 157, 205)
I want to keep the volume at the same level when I turn the power on
0 By default, the volume setting when power was previously set to standby on this unit is applied at next power on with no change. To use a fixed volume
level, set the volume level at power on for “Power On Volume” in the menu. You can set this for each zone. (v p. 157, 205)
I want to have the subwoofer always output audio
0 Depending on the input signals and sound mode, the subwoofer may not output audio. When “Subwoofer Mode” in the menu is set to “LFE+Main”, you
can have the subwoofer always output audio. (v p. 194)
I want to make human voices in the movies clearer
0 Use “Dialog Level Adjust” in the menu to adjust the level. (v p. 151)
I want to keep bass and clarity during playback at a lower volume level
0 Set “Dynamic EQ” in the menu to “On”. This setting corrects the frequency characteristics to allow you to enjoy clear sound without the bass being lost
even during playback at a lower volume level. (v p. 159)
I want to automatically adjust the volume level difference in content such as TV and movies
0 Set “Dynamic Volume” in the menu. Volume level changes (between quiet scenes and loud scenes) in TV shows or movies are automatically adjusted
to your desired level. (v p. 160)
Front panel
Display
Rear panel
215
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
I want to set the optimized listening environment after changing the configuration/position of the speakers or changing a speaker to a new
one.
0 Perform Audyssey® Setup. This automatically makes the optimized speaker settings for the new listening environment. (v p. 178)
I want to combine a desired video with the current music
0 Set “Video Select” in the option menu to “On”. You can combine the current music with your desired video source from Set-top Box or DVD, etc. while
listening to music from Tuner, CD or the Internet radio. (v p. 115)
I want to play back photos from Flickr at the same time while listening to the Internet radio
0 After playing back photos from Flickr, start the slide show on the Internet radio playback screen. (v p. 111)
I want to delete unused input sources
0 Set unused input sources for “Hide Sources” in the menu. This allows you to skip unused input sources when turning the INPUT SELECTOR knob on
this unit. (v p. 176)
I want to enjoy the same music in all zones at the home party, etc.
0 Set “All Zone Stereo” in the option menu to “Start”. This allows you to simultaneously play back the music that is being played back in MAIN ZONE in
ZONE2. (v p. 117)
I want to minimize the delay in video signals when I’m playing a game on my game console
0 When the video is delayed against button operations with the controller on the game console, set “Video Mode” in the menu to “Game”. (v p. 168)
Front panel
Display
Rear panel
216
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Troubleshooting
If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the other devices operating properly?
If this unit does not operate properly, check the corresponding symptoms in this section.
If the symptoms do not match any of those described here, consult your dealer as it could be due to a fault in this unit. In this case, disconnect the power
immediately and contact the store where you purchased this unit.
Front panel
Display
Rear panel
217
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Power does not turn on / Power is turned off
Symptom
Cause / Solution
Page
Power does not turn on.
0 Check whether the power plug is correctly inserted into the power outlet.
56
Power automatically turns
off.
0 The sleep timer is set. Turn on the power again.
131
0 “Auto Standby” is set. “Auto Standby” is triggered when there is no operation for a set amount of time. To
204
Power turns off and the
power indicator flashes in
red approx. every 2
seconds.
0 The protection circuit has been activated due to a rise in temperature within this unit. Turn the power off,
259
0 Please re-install this unit in a place having good ventilation.
-
Power turns off and the
power indicator flashes in
red approx. every 0.5
seconds.
0 Check the speaker connections. The protection circuit may have been activated because speaker cable
28
0 Turn down the volume and turn on the power again.
58
0 This unit’s amplifier circuit has failed. Unplug the power cord and contact our customer service center.
-
0 The power supply of ZONE2 is turned to ON. To turn off the power supply of this unit (standby), press the
-
disable “Auto Standby”, set “Auto Standby” on the menu to “Off”.
Power does not turn off
even when the power
button is pressed, and the
display shows “ZONE2
On”.
Front panel
wait about an hour until this unit cools down sufficiently, and then turn the power on again.
core wires came in contact with each other or a core wire was disconnected from the connector and
came in contact with the rear panel of this unit. After unplugging the power cord, take corrective action
such as firmly re-twisting the core wire or taking care of the connector, and then reconnect the wire.
ZONE2 ON/OFF on the main unit, or press the POWER X button after pressing the ZONE2 button on the
remote control unit to turn off the power supply of ZONE2.
Display
Rear panel
218
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Operations cannot be performed through the remote control unit
Symptom
Operations cannot be
performed through the
remote control unit.
Cause / Solution
Page
0 Batteries are worn out. Replace with new batteries.
8
0 Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within
8
30°.
0 Remove any obstacle between this unit and the remote control unit.
-
0 Insert the batteries in the proper direction, checking the q and w marks.
8
0 The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb
-
0 The operation target zone does not correspond to the zone setting specified on the remote control unit.
148
light, etc.). Move the set to a place in which the remote control sensor will not be exposed to strong light.
Press the MAIN or ZONE2 button to select the operating zone of the remote control.
0 When using a 3D video device, the remote control unit of this unit may not function due to effects of
infrared communications between units (such as TV and glasses for 3D viewing). In this case, adjust the
direction of units with the 3D communications function and their distance to ensure they do not affect
operations from the remote control unit of this unit.
-
o Display on this unit shows nothing
Symptom
Display is off.
Front panel
Cause / Solution
Page
0 Set “Dimmer” on the menu to something other than “Off”.
207
0 When the sound mode is set to “Pure Direct”, the display is off.
120
Display
Rear panel
219
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o No sound comes out
Symptom
No sound comes out of
speakers.
Cause / Solution
Page
0 Check the connections for all devices.
28
0 Insert connection cables all the way in.
-
0 Check that input connectors and output connectors are not reversely connected.
-
0 Check cables for damage.
-
0 Check that speaker cables are properly connected.Check that cable core wires come in contact with the
28
0 Securely tighten the speaker terminals. Check speaker terminals for looseness.
28
0 Check that a proper input source is selected.
58
0 Adjust the volume.
59
metal part on speaker terminals.
0 Cancel the mute mode.
59
0 Check the digital audio input connector setting.
174
0 Check the digital audio output setting on the connected device. On some devices, the digital audio output
-
0 When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the
14
No sound comes out when
using the DVI-D
connection.
0 When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a
-
No sound comes out of a
TV that is connected via
HDMI.
0 Audio signals input to 7.1CH IN connectors on this unit cannot be output to the TV.
-
is set to off by default.
speaker terminal and PRE OUT connector.
Front panel
separate audio connection.
Display
Rear panel
220
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Desired sound does not come out
Symptom
The volume does not
increase.
Cause / Solution
Page
0 The maximum volume is set too low. Set the maximum volume using “Limit” on the menu.
0 Appropriate volume correction processing is performed according to the input audio format and settings,
so the volume may not reach the upper limit.
No sound comes out with
the HDMI connection.
0 Check the connection of the HDMI connectors.
40
165
0 When using the HDMI control function, check that the audio output is set to the AV amplifier on the TV.
130
0 Check that speaker cables are properly connected.
28
0 Check that a selection other than “None” is set for the “Speaker Config.” setting in menu.
189
0 Check the “Assign Mode” setting in the menu.
188
0 When the sound mode is “Stereo” and “Virtual”, audio is only output from the front speakers and
subwoofer.
No sound is produced from 0 Check the subwoofer connections.
subwoofer.
0 Turn on the subwoofer’s power.
-
0 Set “Speaker Config.” - “Subwoofer” on the menu to “Yes”.
189
0 When “Speaker Config.” - “Front” in the menu is set to “Large”, depending on the input signal and the
189
0 When no subwoofer audio signal (LFE) is included in the input signals, no sound may be output from the
194
0 You can make the subwoofer always output sound by setting the “Subwoofer Mode” to “LFE+Main”.
194
subwoofer.
0 Check that the digital audio output setting on the connected device is set to “DTS”.
-
0 Set “Decode Mode” on the menu to “Auto” or “DTS”.
Dolby TrueHD, DTS-HD,
Dolby Digital Plus audio is
not output.
Front panel
-
29
sound mode, no sound may be output from the subwoofer.
DTS sound is not output.
-
0 When outputting HDMI audio from the speakers, set “HDMI Audio Out” on the menu to “AVR”. To output
from the TV, set “TV”.
No sound comes out of a
specific speaker.
157
177
0 Make HDMI connections.
45
0 Check the digital audio output setting on the connected device. On some devices, “PCM” is set by
-
default.
Display
Rear panel
221
Remote
Index
Contents
Connections
Playback
Symptom
Settings
Tips
Cause / Solution
Appendix
Page
Dolby PLg mode or DTS
Neo:6 mode cannot be
selected.
0 It cannot be selected when “Speaker Config.” - “Center” or “Surround” is set for “None”.
Audyssey MultEQ® XT,
Audyssey Dynamic EQ®
and Audyssey Dynamic
Volume® cannot be
selected.
0 These cannot be selected when you have not performed Audyssey® Setup.
178
0 Switch to a sound mode other than “Direct” or “Pure Direct”.
120
“M-DAX” cannot be
selected.
0 Check that an analog signal or PCM signal (Sample Rate = 44.1/48 kHz) is input. For playback of
156
0 Switch to a sound mode other than “Direct” or “Pure Direct”.
120
No sound is output when
using ZONE2.
0 Dolby PLg or DTS Neo:6 cannot be selected when using headphones.
-
0 These cannot be selected when using the headphones.
-
multichannel signals such as Dolby Digital or DTS surround, “M-DAX” cannot be used.
0 Digital signal audio input from the HDMI connector or digital audio connectors (OPTICAL/COAXIAL)
-
0 When listening to the audio of a Bluetooth device in ZONE2, remove any obstructions between the
-
cannot be played back. Use analog connections.
Bluetooth device and this unit and use it within a range of about 32.8 ft/10 m.
Front panel
189
Display
Rear panel
222
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Sound is interrupted or noise occurs
Symptom
During playback from the
Internet radio or USB
memory device, sound is
occasionally interrupted.
Cause / Solution
Page
0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted.
-
0 The network communication speed is slow or the radio station is busy.
-
When making a call on
iPhone, noise occurs in
audio output on this unit.
0 When making a call, keep a distance of 0.7 ft/20 cm or longer between iPhone and this unit.
-
Noise often occurs in
FM/AM broadcasting.
0 Change the antenna orientation or position.
50
0 Please use an outdoor antenna.
50
0 Separate the antenna from other connection cables.
50
0 Lower the volume.
59
The sounds appear to be
distorted.
0 Set “Off” to the ECO Mode. When “On” or “Auto” is in the ECO Mode, the audio may by distorted when
the playback volume is high.
Sound cuts out when using 0 If nearby devices cause playback to cut out due to electronic interference, switch to a wired LAN
Wi-Fi connection.
connection.
0 Particularly when you play back large music files, depending on your wireless LAN environment, the
playback sound may be interrupted. In this case, make the wired LAN connection.
Front panel
Display
Rear panel
223
Remote
Index
203
52
197
Contents
Connections
Playback
Settings
Tips
Appendix
o No video is shown on the TV
Symptom
No picture appears.
Cause / Solution
Page
0 Check the connections for all devices.
40
0 Insert connection cables all the way in.
-
0 Check that input connectors and output connectors are not reversely connected.
-
0 Check cables for damage.
-
0 Match the input settings to the input connector of the TV connected to this unit.
174
0 Check that the proper input source is selected.
58
0 Check the video input connector setting.
174
0 Check that the resolution of the player corresponds to that of the TV.
208
0 Check whether the TV is compatible with copyright protection (HDCP). If connected to a device not
236
0 The HDMI signal cannot be converted to an analog signal. Use analog connections.
237
compatible with HDCP, video will not be output correctly.
0 Use an “High Speed HDMI cable with Ethernet” or “High speed cable” that comes with the HDMI logo if
-
No video is shown on the
TV with the DVI-D
connection.
0 With the DVI-D connection, on some device combinations, devices may not function properly due to the
236
No video from an input
source such as a game
console is shown on the
TV.
0 When special video signals are input from a game console, etc., the video conversion function may not
-
While the menu is being
displayed, no video is
shown on the TV.
0 The video being played will not appear in the background of the menu when the menu is operated during
-
you wish to playback 4K (60/50 Hz) video.
Front panel
copy guard copyright protection (HDCP).
function. Connect the input connector to the monitor output connector of the same type.
playback of the following video signals.
- Some images of 3D video contents
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
- 4K video
Display
Rear panel
224
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o The menu screen is not displayed on the TV
Symptom
The menu screen or status
information screen is not
displayed on the TV.
Cause / Solution
Page
0 The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is
connected to a TV using a different video output connector, operate while watching the display on this
unit.
0 The status information will not appear on the TV when the following video signals are being played.
119
0 When a 2D video is converted to a 3D video on the TV, the menu screen or status information screen is
119
0 In the pure direct playback mode, the menu screen or status information is not displayed. Switch to a
119
0 Set the “TV Format” setting in the menu to a selection that is appropriate for the TV.
173
- Some images of 3D video contents
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
- 4K (60/50 Hz) video
not displayed properly.
sound mode other than the pure direct mode.
Front panel
-
Display
Rear panel
225
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o iPod cannot be played back
Symptom
Cause / Solution
Page
iPod cannot be connected. 0 When using iPod by connecting it to the USB port, some iPod variations are not supported.
0 When iPod is connected by using a USB cable other than the genuine cable, iPod may not be
-
0 This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN). Connect it to
52
0 The firmware on iTunes / iPhone / iPod touch / iPad is not compatible with AirPlay. Update the firmware to
-
0 The volume on iTunes / iPhone / iPod touch / iPad is set to the minimum level. The volume on iTunes /
-
recognized. Use a genuine USB cable.
The AirPlay icon ' is not
displayed on iTunes /
iPhone / iPod touch / iPad.
the same LAN as this unit.
the latest version.
Audio is not output.
iPhone / iPod touch / iPad is linked with the volume on this unit. Set a proper volume level.
0 The AirPlay playback is not performed, or this unit is not selected. Click the AirPlay icon ' on the
104
0 Quit the application running in the background of the iPhone/iPod touch/iPad, and then play using
-
0 Some external factors may be affecting the wireless connection. Modify the network environment by
-
0 Enable the “Allow iTunes audio control from remote speakers” setting on iTunes. Then, you can perform
-
iTunes / iPhone / iPod touch / iPad screen and select this unit.
Audio is interrupted during
the AirPlay playback on
iPhone / iPod touch / iPad.
AirPlay.
taking measures such as shortening the distance from the wireless LAN access point.
iTunes cannot be played
back through the remote
control unit.
Front panel
48
playback, pause, and skip operations through the remote control unit.
Display
Rear panel
226
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o USB memory devices cannot be played back
Symptom
“No connection” is
displayed.
Cause / Solution
Page
0 This unit cannot recognize the USB memory device. Disconnect and reconnect the USB memory device.
48
0 Mass storage class compatible USB memory devices are supported.
-
0 This unit does not support a connection through a USB hub. Connect the USB memory device directly to
-
0 The USB memory device must be formatted to FAT16 or FAT32.
-
0 Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.
-
0 Files of a type not supported by this unit are not displayed.
65
0 This unit is able to display files in a maximum of eight folder layers. A maximum of 5000 files (folders) can
-
the USB port.
When using a type of portable hard disc drive compatible with the USB connection that requires power
from an AC adapter, use the AC adapter that came with the drive.
Files on the USB memory
device are not displayed.
also be displayed for each layer. Modify the folder structure of the USB memory device.
Files on a USB memory
device cannot be played.
0 When multiple partitions exist on the USB memory device, only files on the first partition are displayed.
-
0 Files are created in a format that is not supported by this unit. Check the formats supported by this unit.
239
0 You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be
-
0 Playback may not be possible if the album art file size exceeds 2 MB.
-
played on this unit.
Front panel
Display
Rear panel
227
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o File names on the iPod/USB memory device are not displayed properly
Symptom
The file names are not
displayed properly (“...”,
etc.).
Cause / Solution
Page
0 Characters that cannot be displayed have been used. On this unit, characters that cannot be displayed
are replaced with a “. (period)”.
-
o Bluetooth cannot be played back
Symptom
Bluetooth devices cannot
be connected to this unit.
The sound is cut off.
Cause / Solution
Page
0 The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the
-
0 Bring the Bluetooth device near to this unit.
-
Bluetooth device to enable the Bluetooth function.
0 The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.
-
0 Turn the power of the Bluetooth device off and on again, and then try again.
-
0 Bring the Bluetooth device near to this unit.
-
0 Remove obstructions between the Bluetooth device and this unit.
-
0 To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN
-
0 Reconnect the Bluetooth device.
-
devices and other Bluetooth devices.
Front panel
Display
Rear panel
228
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o The Internet radio cannot be played back
Symptom
Cause / Solution
Page
A list of broadcasting
stations is not displayed.
0 The LAN cable is not properly connected, or the network is disconnected. Check the connection status.
Internet Radio cannot be
played.
0 The selected radio station is broadcasting in a format that is not supported by this unit. Formats that can
0 Perform the network diagnostic mode.
52
-
be played back in this unit are MP3, WMA and AAC.
0 The firewall function is enabled on the router. Check the firewall setting.
242
-
0 The IP address is not properly set.
199
0 Check the power of the router is on.
-
0 To obtain the IP address automatically, enable the DHCP server function on the router. Also, set the
199
0 To obtain the IP address manually, set the IP address and proxy on this unit.
199
DHCP setting to “On” on this unit.
0 Some radio stations broadcast silently during some time period. In this case, no audio is output. Wait for a
82
Cannot connect to favorite
radio stations.
0 Radio station is not currently in service. Register radio stations in service.
-
For some radio stations,
“Connection down” is
displayed and station
cannot be connected to.
0 The selected radio station is not in service. Select a radio station in service.
-
while and select the same radio station, or select another radio station.
Front panel
Display
Rear panel
229
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Music files on PC or NAS cannot be played back
Symptom
Files stored on a computer
cannot be played.
Cause / Solution
Page
0 Files are stored in a non-compatible format. Record in a compatible format.
241
0 Files that are copyright protected cannot be played on this unit.
-
0 The set’s USB port cannot be used for connection to a computer.
-
0 Media sharing settings are not correct. Change media sharing settings so that the unit can access the
86
folders on your computer.
Server is not found, or it is
not possible to connect to
the server.
0 The computer’s or router’s firewall is activated. Check the computer’s or router’s firewall settings.
-
0 Computer’s power is not turned on. Turn on the power.
-
0 Server is not running. Launch the server.
-
0 Set’s IP address is wrong. Check the set’s IP address.
Music files on PC cannot
be played back.
196
0 Even if PC is connected to the USB port on this unit, music files on it cannot be played back. Connect PC
to this unit through the network.
Files on PC or NAS are not 0 Files of a type not supported by this unit are not displayed.
displayed.
Music stored on a NAS
cannot be played.
52
241
0 If you use a NAS in conformity with the DLNA standard, enable the DLNA server function in the NAS
-
0 If you use a NAS that does not conform with the DLNA standard, play the music via a PC. Set Windows
86
0 If connection is restricted, set audio equipment as the connection target.
-
setting.
Media Player’s media sharing function and add NAS to the selected play folder.
o Various online services cannot be played
Symptom
Various online services
cannot be played.
Front panel
Cause / Solution
Page
0 The online service may have been discontinued.
Display
Rear panel
230
-
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o The HDMI control function does not work
Symptom
The HDMI control function
does not work.
Cause / Solution
Page
0 Check that “HDMI Control” in the menu is set to “On”.
166
0 You cannot operate devices that are not compatible with the HDMI control function. In addition,
130
0 Check that the HDMI control function setting is enabled on all devices connected to this unit.
130
0 When you make connection related changes such as connecting an additional HDMI device, the link
130
depending on the connected device or the settings, the HDMI control function may not work. In this case,
operate the external device directly.
operation settings may be initialized. Turn off this unit and devices connected via HDMI, and turn them on
again.
0 The HDMI MONITOR 2 connector is not compatible with the HDMI control function. Use the HDMI
MONITOR 1 connector to connect to the TV.
Front panel
Display
Rear panel
231
Remote
Index
40
Contents
Connections
Playback
Settings
Tips
Appendix
o Cannot connect to a wireless LAN network
Symptom
Cannot connect to the
network.
Cause / Solution
Page
0 The network name (SSID), password and encryption setting have not been set up correctly. Configure the
198
0 Shorten the distance from the wireless LAN access point and remove any obstructions to improve access
-
network settings according to the setting details of this unit.
first before re-connecting again. Place the unit away from microwave ovens and other network access
points.
Cannot connect to WPS.
0 Configure the access point channel settings away from channels that are being used by other networks.
-
0 This unit is not compatible with WEP (TSN).
-
0 Check that the WPS mode of the router is operating.
-
0 Click the “Connect” button displayed on the TV within 2 minutes.
-
0 A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to
“None”, “WPA-PSK (AES)” or WPA2-PSK (AES).
0 If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the WPS
button. In this case, use the “Scan Networks” or “Manual” method to connect.
Cannot connect to the
network using iPhone/iPod
touch/iPad.
Front panel
198
-
0 Update the iPhone/iPod touch/iPad firmware to the latest version.
-
0 When using a USB cable to configure the settings, the iOS device firmware version needs to support
-
iOS5 or later. When configuring the settings via a wireless connection, iOS7 or later needs to be
supported.
Display
Rear panel
232
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Resetting factory settings
Perform this procedure if the display is abnormal or if operations cannot be performed.
Various settings are reset to the factory default values. Make settings again.
X
1
2
M-DAX
3
.
Display
Press X while simultaneously pressing M-DAX and
ZONE2 SOURCE.
Remove your fingers from the two buttons when
“Initialized” appears on the display.
0 Before restoring the default setting, the “Save” function of the web control function
can be used to store the various settings of the unit. (v p. 137)
However, account information for network content and information on registered
favorites cannot be stored.
0 When deleting a Pandora account, carry out steps 1 to 3 after signing out in the
Pandora service. (v p. 99)
ZONE2 SOURCE
Front panel
Turn off the power using X.
Rear panel
233
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
About HDMI
HDMI is an abbreviation of High-Definition Multimedia Interface, which is
an AV digital interface that can be connected to a TV or amplifier.
With the HDMI connection, high definition video and high quality audio
formats adopted by Blu-ray Disc players (Dolby Digital Plus, Dolby
TrueHD, DTS-HD, DTS-HD Master Audio) can be transmitted, which is not
possible with the analog video transmission.
Furthermore, in the HDMI connection, audio and video signals can be
transmitted through a single HDMI cable, while in conventional
connections it is necessary to provide audio and video cables separately
for connection between devices. This allows you to simplify the wiring
configuration that tends to be quite complex in a home theater system.
This unit supports the following HDMI functions.
0 3D
This unit supports input and output of 3D (3 dimensional) video signals
of HDMI. To play back 3D video, you need a TV and player that
provide support for the HDMI 3D function and a pair of 3D glasses.
0 4K
This unit supports input and output of 4K (3840 x 2160 pixels) video
signals of HDMI.
0 Content Type
It automatically makes settings suitable for the video output type
(content information).
0 Adobe RGB color, Adobe YCC601 color
0 Deep Color
The color space defined by Adobe Systems Inc. Because it is a wider
color space than RGB, it can produce more vivid and natural images.
An imaging technology supported by HDMI. Unlike RGB or YCbCr,
which uses 8 bits (256 shades) per color, it can use 10 bits (1024
shades), 12 bits (4096 shades), or 16 bits (65536 shades) to produce
colors in higher definition.
Both devices linked via HDMI must support Deep Color.
0 sYCC601 color
Each of these color spaces defines a palette of available colors that is
larger than the traditional RGB color model.
0 “x.v.Color”
This function lets HDTVs display colors more accurately. It enables
display with natural, vivid colors.
“x.v.Color” is trademark of Sony Corporation.
Front panel
Display
Rear panel
234
Remote
Index
Contents
Connections
Playback
Settings
0 Auto Lip Sync
0 ARC (Audio Return Channel)
This function can automatically correct delay between the audio and
video.
Use a TV that is compatible with the Auto Lip Sync function.
Even when the power to this unit is set to standby, signals input from
the HDMI input connector are output to a TV or other device that is
connected to the HDMI output connector.
0 HDMI Control
If you connect the unit and an HDMI control function compatible TV or
player with an HDMI cable and then enable the HDMI control function
setting on each device, the devices will be able to control each other.
0 Power off link
This unit power off can be linked to the TV power off step.
0 Audio output destination switching
From the TV, you can switch whether to output audio from the TV or
the AV amplifier.
0 Volume adjustment
You can adjust this unit’s volume in the TV volume adjustment
operation.
0 Input source switching
You can switch this unit input sources through linkage to TV input
switching.
When playing the player, this unit input source switches to the
source for that player.
Display
Rear panel
Appendix
This function transmits audio signals from the TV to this unit through
the HDMI cable and plays back the audio from the TV on this unit
based on the HDMI control function.
If a TV without the ARC function is connected via HDMI connections,
video signals of the playback device connected to this unit are
transmitted to the TV, but this unit can not play back the audio from the
TV. If you want to enjoy surround audio for TV program, a separate
audio cable connection is required.
In contrast, if a TV with the ARC function is connected via HDMI
connections, no audio cable connection is required. Audio signals from
the TV can be input to this unit through the HDMI cable between this
unit and the TV. This function allows you to enjoy surround playback
on this unit for the TV.
0 HDMI Pass Through
Front panel
Tips
235
Remote
Index
Contents
Connections
Playback
Settings
o Supported audio formats
2-channel, 32 kHz – 192 kHz, 16/20/24 bit
Multi-channel Linear
PCM
7.1-channel, 32 kHz – 192 kHz, 16/20/24 bit
In order to play back digital video and audio such as BD video or DVD
video via HDMI connection, both this unit and the TV or player must to
support the copyright protection system known as HDCP (Highbandwidth Digital Content Protection System). HDCP is copyright
protection technology comprised of data encryption and authentication of
the connected AV devices. This unit supports HDCP.
0 If a device that does not support HDCP is connected, video and audio
are not output correctly. Read the owner’s manual of your television or
player for more information.
Dolby Digital / DTS / Dolby TrueHD /
Dolby Digital Plus / DTS-HD Master Audio /
DTS-HD High Resolution Audio / DTS Express
o Supported video signals
0 480i
0 480p
0 576i
0 576p
0 720p 60/50Hz
0 1080i 60/50Hz
0 1080p 60/50/24Hz
0 4K 60/50/30/25/24 Hz
Front panel
Display
Appendix
Copyright protection system
2-channel Linear PCM
Bitstream
Tips
Rear panel
When connecting this unit to a device that is compatible with the Deep Color, 4K and
ARC functions, use a “High Speed HDMI cable with Ethernet” that bears the HDMI
logo.
236
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Video conversion function
This unit automatically converts the input video signals as shown in the diagram before outputting them to the TV.
This unit
Video device
Input (IN)
Output
HDMI-compatible TV
Output
(MONITOR OUT)
HDMI signal
HDMI signal
HDMI connector
HDMI connector
HDMI connector
HDMI connector
HDMI-incompatible TV
Component
video signal
Component
video signal
Component video
connectors
Component video
connectors
Component video
connectors
Video connector
Video connector
Video connector
Video signal
Front panel
Display
Rear panel
237
Video signal
Component video
connectors
The main zone video conversion
function is compatible with the following
formats: NTSC, PAL, SECAM,
NTSC4.43, PAL-N, PAL-M and PAL-60.
Video connector
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
This unit can convert the input video signals to the resolution that is set for “Resolution” (v p. 170) in the menu before outputting them to the TV.
Input signal
HDMI
Component Video
Video
Output signal
480i/576i
480p/576p
720p
1080i
480i/576i
480p/576p
720p
1080i
1080p 24Hz
1080p
4K 30/25/24Hz
4K 60/50Hz
P
P
P
P
P
P
P
P
P
P
P
480i/576i
480p/576p
720p
1080i
1080p
480i/576i
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
Rear panel
238
HDMI
1080p
1080p 24Hz
P
P
P
P
P
P
4K 30/25/24Hz
P
P
P
P
P
P
Pz
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
z The HDMI connector on the front panel is not compatible.
Front panel
Display
4K 60/50Hz
P
P
P
P
P
P
P
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing back a USB memory devices
0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.
0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4.
0 This unit is compatible with WMA META tags.
0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played
back properly.
o Compatible formats
WMA
(Windows Media Audio)z1
MP3
(MPEG-1 Audio Layer-3)
WAV
Sampling frequency
32/44.1/48 kHz
32/44.1/ 48 kHz
32/44.1/48/88.2/
96/176.4/192 kHz
Bit rate
48 – 192
kbps
32 – 320
kbps
Extension
.mp3
–
.wav
32/44.1/48 kHz
16 – 320
kbps
32/44.1/48/88.2/
96/176.4/192 kHz
.aac/
.m4a/
.mp4
–
.flac
32/44.1/48/88.2/
96 kHz
–
.m4a
DSD
2.8 MHz
–
AIFF
32/44.1/48/88.2/
96/176.4/192 kHz
–
.dsf/
.dff
.aif/
.aiff
MPEG-4 AACz1
FLAC
(Free Lossless Audio Codec)
ALAC
(Apple Lossless Audio
Codec)z2
Front panel
Display
z1 Only files that are not protected by copyright can be played on this unit.
Content downloaded from pay sites on the Internet are copyright protected.
Also, files encoded in WMA format when ripped from a CD, etc. on a computer
may be copyright protected, depending on the computer’s settings.
.wma
Rear panel
z2 Copyright [2012] [D&M Holdings. Inc.]
Licensed under the Apache License, Version 2.0 (the “License”); you may not
use this file except in compliance with the License. You may obtain a copy of
the License at
http://www.apache.org/licenses/LICENSE-2.0
In ZONE2, it is not possible to play the DSD signal.
239
Remote
Index
Contents
Connections
Playback
Settings
o Maximum number of playable files and folder
Item
Memory capacity
USB memory device
8 levels
Number of folders
500
filesz2
5000
Number of
This unit supports the following Bluetooth profile.
0 A2DP (Advanced Audio Distribution Profile):
When a Bluetooth device that supports this standard is connected,
monaural and stereo sound data can be streamed at a high quality.
0 AVRCP (Audio/Video Remote Control Profile):
When a Bluetooth device that supports this standard is connected, the
Bluetooth device can be operated from this unit.
FAT16 : 2 GB, FAT32 : 2 TB
Number of folder directory levels z1
o About Bluetooth communications
z1 The limited number includes the root folder.
z2 The allowable number of files may differ according to the USB memory device
capacity and the file size.
Front panel
Display
Rear panel
Appendix
Playing back a Bluetooth device
The limits on the number of folders and files that can be displayed by
this unit are as follows.
Media
Tips
Radio waves broadcast from this unit may interfere with the operation
of medical devices. Make sure you turn off the power of this unit and
Bluetooth device in the following locations as radio wave interference
may cause malfunctions.
0 Hospitals, trains, aircraft, petrol kiosks and places where flammable
gases are generated
0 Near automatic doors and fire alarms
240
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing back a file saved on a PC or NAS
0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard.
0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4.
0 This unit is compatible with WMA META tags.
0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played
back properly.
0 A server or server software compatible with distribution in the corresponding formats is required to play music files via a network.
o Specifications of supported files
Bit rate
48 – 192
kbps
32 – 320
kbps
Extension
–
.wav
32/44.1/48 kHz
16 – 320
kbps
32/44.1/48/88.2/
96/176.4/192 kHz
.aac/
.m4a/
.mp4
–
.flac
32/44.1/48/88.2/
96 kHz
–
.m4a
DSD
2.8 MHz
–
AIFF
32/44.1/48/88.2/
96/176.4/192 kHz
–
.dsf/
.dff
.aif/
.aiff
WMA
(Windows Media Audio)z1
MP3
(MPEG-1 Audio Layer-3)
WAV
MPEG-4 AACz1
FLAC
(Free Lossless Audio Codec)
ALAC
(Apple Lossless Audio
Codec)z2
Front panel
Sampling frequency
32/44.1/48 kHz
32/44.1/ 48 kHz
32/44.1/48/88.2/
96/176.4/192 kHz
Display
z1 Only files that are not protected by copyright can be played on this unit.
Content downloaded from pay sites on the Internet are copyright protected.
Also, files encoded in WMA format when ripped from a CD, etc. on a computer
may be copyright protected, depending on the computer’s settings.
.wma
.mp3
Rear panel
z2 Copyright [2012] [D&M Holdings. Inc.]
Licensed under the Apache License, Version 2.0 (the “License”); you may not
use this file except in compliance with the License. You may obtain a copy of
the License at
http://www.apache.org/licenses/LICENSE-2.0
In ZONE2, it is not possible to play the DSD signal.
241
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Playing back Internet Radio
Personal memory plus function
o Playable broadcast station specifications
The most recently used settings (input mode, HDMI output mode, sound
mode, tone control, channel level, MultEQ® XT, Dynamic EQ, Dynamic
Volume, M-DAX and audio delay, etc.) are saved for each input source.
WMA
(Windows Media Audio)
MP3
(MPEG-1 Audio Layer-3)
MPEG-4 AAC
Front panel
Sampling frequency
32/44.1/ 48 kHz
Bit rate
48 – 192
kbps
32 – 320
kbps
32/44.1/48 kHz
16 – 320
kbps
32/44.1/48 kHz
Display
Extension
.wma
“Surround Parameter” settings are stored for each sound mode.
.mp3
Last function memory
.aac/
.m4a/
.mp4
Rear panel
This function stores the settings which were made before going into the
standby mode.
242
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Sound modes and channel output
S This indicates the audio output channels or surround parameters that can be set.
DThis indicates the audio output channels. The output channels depend on the settings of “Speaker Config.” (v p. 189).
Sound mode (v p. 118)
Channel output
Front L/R
Center
Surround L/R
Surround back L/R
Front height L/R
Subwoofer
Dz1
Dz3
D
Direct/Pure Direct (2-channel)
S
Direct/Pure Direct (Multi-channel)
S
D
D
Dz1
Stereo
Multi Ch In
S
S
D
D
Dz1
Dolby Pro Logic gz
Dolby Pro Logic gx
Dolby Pro Logic g
DTS Neo:6
Dolby Digital
S
S
S
S
S
D
D
D
D
D
D
D
D
D
D
Dolby Digital Plus
S
D
Dolby TrueHD
S
DTS Surround
D
D
D
D
D
Dz2
D
D
D
D
D
D
Dz1
Dz1
D
D
D
Dz1
D
S
D
D
Dz1
D
Dz2
D
DTS 96/24
S
D
D
D
Dz2
D
DTS-HD
S
D
D
Dz1
D
DTS Express
S
D
D
Dz1
D
D
Multi Ch Stereo
Virtual
S
S
D
D
D
Dz2
D
D
z1 A signal for each channel contained in an input signal is output as audio.
z2 Audio is output when the set sound mode name contains “+PLgz”.
z3 Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v p. 194)
Front panel
Display
Rear panel
243
Remote
Index
D
D
Contents
Connections
Playback
Settings
Tips
Appendix
Sound modes and surround parameters
Surround Parameter (v p. 152)
Dialog Level
Adjust
(v p. 151)
Sound mode (v p. 118)
Subwoofer Level
Adjust (v p. 151)
Direct/Pure Direct (2-channel) z5
Direct/Pure Direct (Multi-channel) z5
S
Stereo
Cinema EQ
(v p. 152)
Loudness
Management z1
(v p. 152)
Dynamic Compression z2
(v p. 153)
S z6
S
S
S
S
S
S
S
S
Low Frequency
Effects z3
(v p. 153)
Height Gain z4
(v p. 155)
S
Multi Ch In
S
S
S
Dolby Pro Logic gz
S
S
S
S
S
Dolby Pro Logic gx
S
S
S
S
S
Dolby Pro Logic g
S
S
S
S
S
DTS Neo:6
S
S
S
S
S
Dolby Digital
S
S
S
S
S
S
Dolby Digital Plus
S
S
S
S
S
S
Dolby TrueHD
S
S
S
S
S
S
DTS Surround
S
S
S
S
S
S
DTS 96/24
S
S
S
S
S
DTS-HD
S
S
S
S
S
DTS Express
S
S
S
S
S
Multi Ch Stereo
S
S
S
Virtual
z1
-
z6
S
S
S
Front panel
Display
Rear panel
244
S
S
S
S
S
S
S
: “Sound modes and surround parameters” (v p. 246)
Remote
Index
S
Contents
Connections
Playback
Settings
Tips
Surround Parameter (v p. 152)
Neo: 6 Music
modes only
Pro Logicg/gx Music mode only
Sound mode (v p. 118)
Panorama
(v p. 154)
Dimension
(v p. 154)
Center Width
(v p. 154)
Center
Image
(v p. 154)
Appendix
Audyssey (v p. 158)
Tone z7
(v p. 114)
MultEQ® XT Dynamic EQ z9 Dynamic Volume
z9 (v p. 160)
z8 (v p. 158)
(v p. 159)
M-DAX z10
(v p. 156)
Direct/Pure Direct (2-channel) z5
Direct/Pure Direct (Multi-channel) z5
Stereo
Multi Ch In
Dolby Pro Logic gz
S
S
S
S
S
S
S
S
S
S
S
S
S
Dolby Pro Logic gx
S
S
S
S
S
S
S
S
Dolby Pro Logic g
S
S
S
S
S
S
S
S
S
S
S
S
S
Dolby Digital
S
S
S
S
Dolby Digital Plus
S
S
S
S
Dolby TrueHD
S
S
S
S
DTS Surround
S
S
S
S
DTS 96/24
S
S
S
S
DTS-HD
S
S
S
S
DTS Express
S
S
S
S
Multi Ch Stereo
S
S
S
S
S
Virtual
S
S
S
S
S
DTS Neo:6
z5, z7
-
z10
S
: “Sound modes and surround parameters” (v p. 246)
Front panel
Display
Rear panel
245
Remote
Index
Contents
z1
z2
z3
z4
z5
z6
z7
z8
Connections
Playback
Settings
Tips
This item can be selected when a Dolby TrueHD signal is played.
This item can be selected when Dolby TrueHD, Dolby Digital or DTS signal is played.
This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
This setting is available when the set sound mode name contains “+PLgz”.
During playback in Pure Direct mode, the surround parameters are the same as in Direct mode.
This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v p. 194)
This item cannot be set when “Dynamic EQ” is set to “On”. (v p. 159)
This item cannot be set when Audyssey® Setup (Speaker Calibration) has not been performed.
z9 This item cannot be set when “MultEQ® XT” is set to “Off”. (v p. 158)
z10 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z11 In this sound mode, bass is +6 dB, and treble is +4 dB. (Default)
Front panel
Display
Rear panel
246
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Types of input signals, and corresponding sound modes
F This indicates the default sound mode.
S This indicates the selectable sound mode.
2-channel signal
Sound mode (v p. 118)
NOTE
Multi-channel signal
Analog /PCM Dolby Digital PCM DTS-HD DTS Express
DTS
DTS DTS Dolby TrueHD Dolby Digital Plus Dolby Digital EX Dolby Digital
(+/HD)/
Multi
ES
ES
DTS (-HD)
DSCRT MTRIX
6.1
6.1
DTS Surround
DTS-HD Mstr
Fz6
DTS-HD Hi Res
Fz7
DTS ES Dscrt6.1
z1
DTS ES Mtrx6.1
z1
F
F
DTS Surround
F
DTS 96/24
Fz8
DTS (–HD) + PLgx
z1z2
S
S
DTS (–HD) + PLgz
z3
S
S
DTS Express
DTS Neo:6
S
S
S
S
F
z4
S
S
Dolby Surround
Dolby TrueHD
F
Dolby Digital+
F
Dolby Digital EX
z1
Dolby (D+) (HD) + EX
z1
S
S
Dolby (D) (D+) (HD) + PLgx
z1z2
S
S
S
S
Dolby (D) (D+) (HD) + PLgz
z3
S
S
S
S
Dolby Pro Logic g/gx
z5
S
S
Dolby Pro Logic gz
z3
S
S
Dolby Digital
z1
– z8 : “Types of input signals, and corresponding sound modes” (v p. 249)
Front panel
Display
Rear panel
247
Remote
Index
S
S
F
F
Contents
Connections
Playback
Settings
Tips
2-channel signal
Sound mode (v p. 118)
NOTE
Analog /PCM
Appendix
Multi-channel signal
Dolby Digital
PCM DTS-HD DTS Express
(+/HD)/DTS (-HD) Multi
DTS
DTS DTS Dolby TrueHD Dolby Digital Plus Dolby Digital EX Dolby Digital
ES
ES
DSCRT MTRIX
6.1
6.1
Multi Ch In
Multi Ch In
F
Multi Ch In + Dolby EX
Multi Ch In + PLgx
z1
S
z1z2
S
Multi Ch In + PLgz
z3
S
Multi Ch In 7.1
z1
Fz10
Direct
Direct
S z9
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
Multi Ch Stereo
S
S
S
S
S
S
S
S
S
S
S
S
Virtual
S
S
S
S
S
S
S
S
S
S
S
S
F
S
S
S
S
S
S
S
S
S
S
S
Pure Direct
Pure Direct
Original sound mode
Stereo
Stereo
z1
–
z3, z9, z10
: “Types of input signals, and corresponding sound modes” (v p. 249)
Front panel
Display
Rear panel
248
Remote
Index
Contents
z1
z2
z3
z4
z5
z6
z7
z8
z9
z10
Connections
Playback
Settings
Tips
This item can be selected when surround back speakers are used.
The “Cinema” mode or “Music” mode can be selected. When using a single surround back speaker, the “Music” mode is used.
This item can be selected when front height speakers are used.
The “Cinema” mode or “Music” mode can be selected.
The “Cinema” mode, “Music” mode or “Game” mode can be selected.
This item can be selected when the input signal is DTS-HD Master Audio.
This item can be selected when the input signal is DTS-HD Hi Resolution.
This item can be selected when the input signal is DTS 96/24.
The default sound mode for the AirPlay playback is Direct.
This item can be selected when the input signals contain surround back signals.
Front panel
Display
Rear panel
249
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
Explanation of terms
o Audyssey
Audyssey MultEQ® XT
Audyssey MultEQ® XT is a room equalization solution that calibrates any
audio system so that it can achieve optimum performance for every
listener in a large listening area. Based on several room measurements,
MultEQ® XT calculates an equalization solution that corrects for both time
and frequency response problems in the listening area and also performs
a fully automated surround system setup.
Audyssey Dynamic EQ®
Dynamic EQ solves the problem of deteriorating sound quality as volume
is decreased by taking into account human perception and room
acoustics.
Audyssey Dynamic EQ® works in tandem with Audyssey MultEQ® XT to
provide well-balanced sound for every listener at any volume level.
o Dolby
Audyssey Dynamic Volume®
Dolby Digital
Dynamic Volume solves the problem of large variations in volume level
between television programs, commercials, and between the soft and loud
passages of movies. Audyssey Dynamic EQ® is integrated into Dynamic
Volume so that as the playback volume is adjusted automatically, the
perceived bass response, tonal balance, surround impression, and dialog
clarity remain the same.
Front panel
Display
Rear panel
Dolby Digital is a multi-channel digital signal format developed by Dolby
Laboratories.
A total of 5.1-channels are played: 3 front channels (“FL”, “FR” and “C”), 2
surround channels (“SL” and “SR”) and the “LFE” channel for low
frequency effects.
Because of this, there is no crosstalk between channels and a realistic
sound field with a “three-dimensional” feeling (sense of distance,
movement and positioning) is achieved. This delivers a thrilling surround
sound experience in the home.
250
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Dolby Digital Plus
Dolby Pro Logic g
Dolby Digital Plus is an improved Dolby Digital signal format that is
compatible with up to 7.1-channels of discrete digital sound and also
improves sound quality thanks to extra data bit rate performance. It is
upwardly compatible with conventional Dolby Digital, so it offers greater
flexibility in response to the source signal and the conditions of the
playback device.
Dolby Pro Logic g is a matrix decoding technology developed by Dolby
Laboratories.
Regular music such as that on CDs is encoded into 5-channels to achieve
an excellent surround effect.
The surround channel signals are converted into stereo and full band
signals (with a frequency response of 20 Hz to 20 kHz or greater) to create
a “three-dimensional” sound image offering a rich sense of presence for all
stereo sources.
Dolby Digital EX
Dolby Digital EX is a 6.1-channel surround format from Dolby Laboratories
that allows users to enjoy in their homes the “Dolby Digital Surround EX”
audio format jointly developed by Dolby Laboratories and Lucasfilm.
The 6.1-channels of sound, including surround back channel, provide
improved sound positioning and expansion of the surround sound field.
Front panel
Display
Rear panel
Dolby Pro Logic gx
Dolby Pro Logic gx is a further improved version of the Dolby Pro Logic g
matrix decoding technology. Audio signals recorded in 2-channels are
decoded to achieve a natural sound with up to 7.1-channels. There are
three modes: “Music” suited for playing music, “Cinema” suited for playing
movies, and “Game” which is optimized for playing games.
251
Remote
Index
Contents
Connections
Playback
Settings
Appendix
o DTS
Dolby Pro Logic gz
Dolby Pro Logic gz introduces a new dimension to Home Entertainment
through the addition of a pair of front height channels. This supports
various sources such as 2-channel sources and 7.1/5.1 multi-channel
sources.
By adding height speakers to the upper left and right locations in the front
of the listening environment, you can enjoy more spatial spread feel and
depth feel when you play back movies/music/games.
DTS
This is an abbreviation of Digital Theater System, which is a digital audio
system developed by DTS. DTS delivers a powerful and dynamic
surround sound experience, and is found in the world’s finest movie
theaters and screening rooms.
DTS 96/24
Dolby Pro Logic gz, with front height channels is also an ideal alternative
for households that cannot support the placement of back surround
speakers of a typical 7.1-channel system but may have bookshelf space
available to support the addition of height speakers.
DTS 96/24 is a digital audio format enabling high sound quality playback in
5.1-channels with a sampling frequency of 96 kHz and 24 bit quantization
on DVD-Video.
DTS Digital Surround
Dolby TrueHD
DTS™ Digital Surround is the standard digital surround format of DTS,
Inc., compatible with a sampling frequency of 44.1 or 48 kHz and up to
5.1-channels of digital discrete surround sound.
Dolby TrueHD is a high definition audio technology developed by Dolby
Laboratories, using lossless coding technology to faithfully reproduce the
sound of the studio master.
This format provides the facility to support up to 8 audio channels with a
sampling frequency of 96 kHz/24 bit resolution and up to 6 audio channels
with a sampling frequency of 192 kHz/24 bit resolution.
Front panel
Tips
Display
Rear panel
252
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
DTS-ES™ Discrete 6.1
DTS-HD High Resolution Audio
DTS-ES™ Discrete 6.1 is a 6.1-channel discrete digital audio format
adding a surround back (SB) channel to the DTS digital surround sound.
Decoding of conventional 5.1-channel audio signals is also possible
according to the decoder.
DTS-HD High Resolution Audio is an improved version of the conventional
DTS, DTS-ES and DTS 96/24 signals formats, compatible with sampling
frequencies of 96 or 48 kHz and up to 7.1-channels of discrete digital
sound. High data bit rate performance provides high quality sound. This
format is fully compatible with conventional products, including
conventional DTS digital surround 5.1-channel data.
DTS-ES™ Matrix 6.1
DTS-ES™ Matrix 6.1 is a 6.1-channel audio format that inserts a surround
back (SB) channel to the DTS digital surround sound through matrix
encoding. Decoding of conventional 5.1-channel audio signals is also
possible according to the decoder.
DTS-HD Master Audio
DTS Express is an audio format supporting low bit rates (max. 5.1channels, 24 to 256 kbps).
DTS-HD Master Audio is a lossless audio format created by Digital
Theater System (DTS). This format provides the facility to support up to 8
audio channels with a sampling frequency of 96 kHz/24 bit resolution and
up to 6 audio channels with a sampling frequency of 192 kHz/24 bit
resolution. It is fully compatible with conventional products, including
conventional DTS digital surround 5.1-channel data.
DTS-HD
DTS Neo:6™ Surround
DTS Express
This audio technology provides higher sound quality and enhanced
functionality than the conventional DTS and is adopted as an optional
audio for Blu-ray Disc.
This technology supports multi-channel, high data transfer speed, high
sampling frequency, and lossless audio playback. Maximum 7.1-channels
are supported in Blu-ray Disc.
Front panel
Display
Rear panel
DTS Neo:6™ is a matrix decoding technology for achieving 6.1-channel
surround playback with 2-channel sources. It includes “DTS Neo:6
Cinema” suite for playing movies and “DTS Neo:6 Music” suited for
playing music.
253
Remote
Index
Contents
Connections
Playback
Settings
o Audio
This is a codec for lossless audio compression method developed by
Apple Inc. This codec can be played back on iTunes, iPod or iPhone. Data
compressed to approximately 60 – 70 % can be decompressed to exactly
the same original data.
FLAC (Free Lossless Audio Codec)
FLAC stands for Free lossless Audio Codec, and is a lossless free audio
file format. Lossless means that the audio is compressed without any loss
in quality.
The FLAC license is as shown below.
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,
2009 Josh Coalson
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
Display
Rear panel
Appendix
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
ALAC (Apple Lossless Audio Codec)
Front panel
Tips
LFE
This is an abbreviation of Low Frequency Effect, which is an output
channel that emphasizes low frequency effect sound. Surround audio is
intensified by outputting 20 Hz to 120 Hz deep bass to the system
subwoofer(s).
MP3 (MPEG Audio Layer-3)
This is an internationally standardized audio data compression scheme,
using the “MPEG-1” video compression standard. It compresses the data
volume to about one eleventh its original size while maintaining sound
quality equivalent to a music CD.
254
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4
Sampling frequency
These are the names for digital compression format standards used for
the encoding of video and audio. Video standards include “MPEG-1
Video”, “MPEG-2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio
standards include “MPEG-1 Audio”, “MPEG-2 Audio”, “MPEG-4 AAC”.
Sampling involves taking a reading of a sound wave (analog signal) at
regular intervals and expressing the height of the wave at each reading in
digitized format (producing a digital signal).
The number of readings taken in one second is called the “sampling
frequency”. The larger the value, the closer the reproduced sound is to the
original.
WMA (Windows Media Audio)
This is audio compression technology developed by Microsoft
Corporation.
Speaker impedance
This is an AC resistance value, indicated in Ω (Ohms).
Greater power can be obtained when this value is smaller.
Media®
WMA data can be encoded using Windows
Player.
To encode WMA files, only use applications authorized by Microsoft
Corporation. If you use an unauthorized application, the file may not work
properly.
Dialog normalization function
This function operates automatically during playback of Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD sources.
It automatically corrects the standard signal level for individual program
sources.
Dynamic range
The difference between the maximum undistorted sound level and the
minimum discernible level above the noise emitted by the device.
Downmix
This function converts the number of channels of surround audio to a
lower number of channels and plays back according to the system’s
configuration.
Front panel
Display
Rear panel
255
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
o Video
o Network
ISF
AES (Advanced Encryption Standard)
ISF (Imaging Science Foundation) is an organization that certifies video
technicians who are then qualified to carry out calibration and adjustment
to match the installation conditions. It also sets quality standards for the
optimization of device video performance.
This is a next generation standard encryption method replacing the current
DES and 3DES, and because of its high security it is expected to be
applied widely to wireless LANs in the future. It uses the “Rijndael”
algorithm developed by two Belgian cryptographers to divide the data into
blocks of fixed lengths and encrypt each block. It supports data lengths of
128, 192 and 256 bits and key lengths of 128, 192 and 256 bits as well,
offering extremely high encryption security.
Progressive (sequential scanning)
This is a scanning system of the video signal that displays 1 frame of video
as one image. Compared to the interlace system, this system provides
images with less flickering and jagged edges.
AirPlay
AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod
touch/iPad to a compatible device via the network.
DLNA
DLNA and DLNA CERTIFIED are trademarks and/or service marks of
Digital Living Network Alliance. Some contents may not be compatible
with other DLNA CERTIFIED® products.
Front panel
Display
Rear panel
256
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
TKIP (Temporal Key Integrity Protocol)
Wi-Fi®
This is a network key used for WPA. The encryption algorithm is RC4, the
same as for WEP, but the security level is increased by changing the
network key used for encryption for each packet.
Wi-Fi Certification assures tested and proven interoperability by the Wi-Fi
Alliance, a group certifying interoperability among wireless LAN devices.
WPA (Wi-Fi Protected Access)
vTuner
This is a security standard established by the Wi-Fi Alliance. In addition to
the conventional SSID (network name) and WEP key (network key), it also
uses a user identification function and encrypting protocol for stronger
security.
This is a free online content server for Internet Radio.
For inquiries about this service, visit the vTuner site below.
vTuner website:
http://www.radiomarantz.com
This product is protected by certain intellectual property rights of Nothing
Else Matters Software and BridgeCo. Use or distribution of such
technology outside of this product is prohibited without a license from
Nothing Else Matters Software and BridgeCo or an authorized subsidiary.
WPA2 (Wi-Fi Protected Access 2)
This is a new version of the WPA established by the Wi-Fi Alliance,
compatible with more secure AES encryption.
WPA-PSK/WPA2-PSK (Pre-shared Key)
This is a simple authentication system for mutual authentication when a
preset character string matches on the wireless LAN access point and
client.
WEP Key (network key)
This is key information used for encrypting data when conducting data
transfer. On this unit, the same WEP key is used for data encryption and
decryption, so the same WEP key must be set on both devices in order for
communications to be established between them.
Front panel
Display
Rear panel
WPS (Wi-Fi Protected Setup)
This is a standard drawn up by the Wi-Fi Alliance to ease the task of
setting up wireless LAN connections and configuring security. There are
two methods: push-button and PIN (Personal Identification Number) code.
257
Remote
Index
Contents
Connections
Playback
Settings
When forming wireless LAN networks, groups are formed to prevent
interference, data theft, etc. These groups are based on “SSID (network
names)”. For enhanced security, a WEP key is set so that communication
is unavailable unless both the “SSID” and the WEP key match. This is
suitable for temporarily constructing a simplified network.
iTunes
iTunes is the name of the multimedia player provided by Apple Inc.
iTunes is the name of the multimedia player provided by Apple Inc. It
enables management and playback of multimedia contents including
music and movies. iTunes supports many main file formats including AAC,
WAV, and MP3.
Modem
Device that connects to your broadband internet provider, and is very
often supplied with the service. A type that is integrated with a router is
also often available.
Display
Rear panel
Appendix
o Media player
Network Names (SSID: Security Set Identifier)
Front panel
Tips
Windows Media Player
This is a media player distributed free of charge by Microsoft Corporation.
It can play playlists created with Ver.11 or later of Windows Media Player,
as well as WMA, WAV, and other files.
258
Remote
Index
Contents
Connections
Playback
Settings
o Others
Tips
Pairing
Pairing (registration) is an operation that is required in order to connect a
Bluetooth device to this unit using Bluetooth. When paired, the devices
authenticate each other and can connect without mistaken connections
occurring.
When using Bluetooth connection for the first time, you need to pair this
unit and the Bluetooth device to be connected.
This unit can store pairing information for a maximum of 8 devices.
App Store
App Store is a site that sells application software for such devices as the
iPhone or iPod Touch, and is operated by Apple Inc.
HDCP
When transmitting digital signals between devices, this copyright
protection technology encrypts the signals to prevent content from being
copied without authorization.
Protection circuit
This is a function to prevent damage to devices within the power supply
when an abnormality such as an overload, excess voltage occurs or over
temperature for any reason.
If a malfunction occurs in this unit, the power indicator blinks red and the
unit switches to standby mode.
ZONE2
This unit can operate in a room other than the room where this unit is
placed (MAIN ZONE) (ZONE2 playback). The room for ZONE2 playback
is called ZONE2.
MAIN ZONE
The room where this unit is placed is called the MAIN ZONE.
Front panel
Appendix
Display
Rear panel
259
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
Trademark information
.
.
Manufactured under license from Audyssey Laboratories™. U.S. and
foreign patents pending. Audyssey MultEQ® XT, Audyssey Dynamic EQ®
and Audyssey Dynamic Volume® are registered trademarks of Audyssey
Laboratories.
.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory
has been designed to connect specifically to iPod, or iPhone,
respectively, and has been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use of this
accessory with iPod, or iPhone, may affect wireless performance.
AirPlay, the AirPlay logo, iPad, iPhone, iPod, iPod classic, iPod nano,
iPod shuffle and iPod touch are trademarks of Apple Inc., registered in
the U.S. and other countries.
0 Individual users are permitted to use iPhone, iPod, iPod classic, iPod
nano, iPod shuffle, and iPod touch for private copy and playback of
non-copyrighted contents and contents whose copy and playback is
permitted by law. Copyright infringement is prohibited by law.
.
The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by D&M Holdings inc.
is under license. Other trademarks and trade names are those of their
respective owners.
Manufactured under license from Dolby Laboratories.
Front panel
Display
Rear panel
260
Remote
Index
Connections
Playback
Settings
Tips
Appendix
.
Contents
Manufactured under a license from U.S. Patent No’s:
5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929;
7,392,195; 7,272,567 & other U.S. and worldwide patents issued &
pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are
registered trademarks & DTS-HD Master Audio is a trademark of DTS,
Inc. Product includes software. ©DTS, Inc. All Rights Reserved.
.
.
The Wi-Fi CERTIFIED logo is a registered trademark of the Wi-Fi
Alliance.
Wi-Fi Certification provides assurance that the device has passed the
interoperability test conducted by the Wi-Fi Alliance, a group that certifies
interoperability among wireless LAN devices.
.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
Adobe, the Adobe logo and Reader are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
This item incorporates copy protection technology that is protected by
U.S. patents and other intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are prohibited.
Front panel
Display
Rear panel
261
Remote
Index
Contents
Connections
Playback
Settings
Tips
Specifications
o Audio section
0 Power amplifier
Rated output:
Front:
100 W + 100 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
100 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
100 W+100 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround back:
100 W + 100 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
140 W + 140 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Output connectors:
4 – 16 Ω/ohms
0 Analog
Input sensitivity/Input impedance:
200 mV/47 kΩ/kohms
Frequency response:
10 Hz – 100 kHz — +1, –3 dB (Direct mode)
S/N:
100 dB (IHF–A weighted, Direct mode)
Front panel
Display
Rear panel
262
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
o Video section
0 Standard video connectors
Input/output level and impedance:
1 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz – 10 MHz — 0, –3 dB
0 Color component video connector
Input/output level and impedance:
Y signal — 1 Vp-p, 75 Ω/ohms
PB / CB signal — 0.7 Vp-p, 75 Ω/ohms
PR / CR signal — 0.7 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz – 60 MHz — 0, –3 dB
o Tuner section
[FM]
[AM]
(Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10 –15 W)
Reception frequency range:
87.5 MHz – 107.9 MHz
520 kHz – 1710 kHz
Effective sensitivity:
1.2 μV (12.8 dBf)
18 μV
50 dB sensitivity:
MONO ― 2.8 μV (20.2 dBf)
S/N ratio:
MONO ― 70 dB (IHF–A weighted, Direct mode)
STEREO ― 67 dB (IHF–A weighted, Direct mode)
Distortion:
MONO ― 0.7 % (1 kHz)
STEREO ― 1.0 % (1 kHz)
Front panel
Display
Rear panel
263
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
o Wireless LAN section
Network type (wireless LAN standard):
Conforming to Wi-Fi®z1
Security:
WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radio frequency:
2.4 GHz
No. of channels:
1 – 11 ch
z1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
Front panel
Display
Rear panel
264
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
o Bluetooth section
Communications system:
Bluetooth Version 2.1 + EDR (Enhanced Data Rate)
Transmission power:
Maximum 2.5 mW (Class 2)
Maximum communication range:
Approx. 32.8 ft/10 m in line of sightz2
Frequency band:
2.4 GHz band
Modulation scheme:
FHSS (Frequency-Hopping Spread Spectrum)
Supported profiles:
A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (Audio Video Remote Control Profile) 1.4
Corresponding codec:
SBC, AAC
Transmission range (A2DP):
20 Hz - 20,000 Hz
z2 The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from
microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.
o General
Power supply:
AC 120 V, 60 Hz
Power consumption:
650 W
Power consumption in standby mode:
0.2 W
Power consumption in CEC standby
mode:
0.5 W
Power consumption in network standby
mode:
2.7 W
For purposes of improvement, specifications and design are subject to change without notice.
Front panel
Display
Rear panel
265
Remote
Index
Contents
Connections
Playback
Settings
Tips
Appendix
6 1/2 (165)
5/8
(16)
2 33/64
(64)
13 5/8 (346)
11 47/64 (298)
2 23/32
(69)
1 17/64
(32)
o Dimensions (Unit : in. (mm))
.1 31/32 (50)
o Weight : 22 lbs 11oz (10.3 kg)
Front panel
Display
13 25/64 (340)
Rear panel
2 11/64
(55)
266
9 1/16 (230)
6 11/32 (161)
33/64
(13)
5 53/64 (148)
17 21/64 (440)
1 31/32(50)
Remote
Index
Contents
Connections
Index
Playback
Settings
v Numerics
4K ................................................................ 234
5.1-channel .................................. 27, 32, 35, 36
7.1-channel ........................................ 27, 33, 34
Connecting ZONE2 ................................ 37, 141
vC
Cables ............................................................ 24
Connecting a Blu-ray Disc player ................... 44
Connecting a cable TV ................................... 45
Connecting a DVD player ............................... 44
Connecting a game console ........................... 46
vA
Accessories ..................................................... 7
Add New Feature ......................................... 211
Adjusting the volume ...................................... 59
Adjusting volume of each channel ................ 113
AirPlay .......................................................... 103
All Zone Stereo ............................................ 117
Audio formats ....................... 236, 239, 241, 242
Audio settings ....................................... 145, 151
Audyssey Dynamic EQ® ............................. 250
Connecting a satellite tuner ............................ 45
Connecting a set-top box ............................... 45
Connecting a TV ................................. 40, 41, 42
Connecting a video camera ........................... 46
Connecting an external control device ........... 54
Connecting an iPod ........................................ 48
Connecting an USB memory device .............. 48
Connecting FM/AM antenna .......................... 50
Connecting a power cord ............................... 56
Audyssey Dynamic Volume® ...................... 250
Audyssey MultEQ® XT ................................ 250
Audyssey settings ................................ 158, 180
Audyssey® Setup ........................................ 178
Auto Standby ............................................... 204
Front panel
Display
Rear panel
Appendix
Connecting wired LAN ........................... 52, 196
vB
Bi-amp connection ......................................... 35
3D ................................................................ 234
Tips
267
Remote
Index
Contents
Connections
vD
Playback
Settings
vI
Input Assign ................................................. 174
Display ........................................................... 16
Input signal ................................................... 247
DLNA ........................................................... 256
Input source settings ............................ 146, 174
Dolby sound mode ............................... 122, 250
Inputting characters ...................................... 149
DTS sound mode ................................. 123, 252
Inserting the batteries ....................................... 8
iPod Browse Mode ......................................... 62
ECO Mode ................................................... 203
Error messages (Audyssey® Setup) ............ 186
Explanation of terms/technology .......... 234, 250
vF
iTunes .......................................................... 258
vJ
vL
Front height speaker ................................ 27, 34
Listening to FM/AM broadcasts ...................... 74
Front panel ..................................................... 13
Listening to Spotify ....................................... 106
HDMI Control ....................................... 130, 166
Front panel
M-DAX ......................................................... 156
Menu map .................................................... 145
HDCP ........................................................... 236
Display
PCM multi-channel sound mode .................. 123
Picture Mode ................................................ 116
Playing back a Bluetooth device .................... 70
Playing back a Blu-ray Disc player ................. 59
Playing back an iPod ...................................... 60
Playing back from PC ..................................... 85
Playing back Internet Radio ........................... 81
Playing back NAS .......................................... 85
Playing back Pandora® ................................. 93
Playing back SiriusXM ................................. 100
vM
vH
vP
Pairing a Bluetooth device ........................ 69, 72
Playing back Flickr ......................................... 92
Listening position ......................................... 178
General settings ................................... 147, 203
Original sound mode .................................... 124
Playing back a DVD player ............................. 59
JPEG ........................................................ 65, 85
Firmware Update .......................................... 210
vG
Playing back USB memory device ................. 65
Playing back ZONE2 .................................... 141
Protection circuit .......................................... 259
PURE DIRECT ............................................. 120
vN
Network settings ................................... 196, 196
Rear panel
Appendix
vO
Direct sound mode ....................................... 125
vE
Tips
268
Remote
Index
Contents
Connections
vR
Playback
Settings
Tips
vT
Random playback .................................. 64, 108
Text Search .................................................. 110
Rear panel ...................................................... 18
Tips .............................................................. 215
Remote control unit ........................................ 21
Tone Control ................................................ 114
Remove from Favorites ................................ 110
Troubleshooting ........................................... 217
Repeat playback .................................... 64, 108
Turning off the sound temporarily (Muting) ..... 59
Resetting factory settings ............................. 233
Turning the power on ..................................... 58
vS
vV
Save to Favorites ......................................... 109
Video Conversion ................................. 169, 237
Selecting the input source .............................. 58
Video Select ................................................. 115
Setup Assistant ............................................ 147
Video settings ....................................... 145, 162
Sleep timer ................................................... 131
Slideshow .................................................... 111
Slideshow Interval ........................................ 112
Smart select function .................................... 133
vW
Web control .................................................. 136
Wi-Fi settings ............................................... 197
Sound mode ................................. 119, 243, 244
Speaker connection ....................................... 25
Speaker Settings .................................. 146, 178
Stereo sound mode ...................................... 125
Surround back speaker .................................. 27
Front panel
Display
Rear panel
269
Remote
Index
Appendix
Contents
Connections
Playback
Settings
Tips
Appendix
License
This section describes software license used for this unit.
To maintain the correct content, the original (English) is used.
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the “Software”), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit
persons to whom the Software is furnished to do so, subject to the following
conditions:
The above copyright notice and this permission notice shall be included in all copies
or substantial portions of the Software.
o Boost
http://www.boost.org/
Boost Software License – Version 1.0 – August 17th, 2003
Permission is hereby granted, free of charge, to any person or organization obtaining
a copy of the software and accompanying documentation covered by this license
(the “Software”) to use, reproduce, display, distribute, execute, and transmit the
Software, and to prepare derivative works of the Software, and to permit third-parties
to whom the Software is furnished to do so, all subject to the following:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
The copyright notices in the Software and this entire statement, including the above
license grant, this restriction and the following disclaimer, must be included in all
copies of the Software, in whole or in part, and all derivative works of the Software,
unless such copies or derivative works are solely in the form of machine-executable
object code generated by a source language processor.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND
NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR
OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
o FastDelegate
http://www.codeproject.com/KB/cpp/FastDelegate.aspx
THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF THIS
CODE PROJECT OPEN LICENSE (“LICENSE”). THE WORK IS PROTECTED BY
COPYRIGHT AND/OR OTHER APPLICABLE LAW. ANY USE OF THE WORK
OTHER THAN AS AUTHORIZED UNDER THIS LICENSE OR COPYRIGHT LAW IS
PROHIBITED.
o Expat
BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HEREIN, YOU
ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS LICENSE. THE
AUTHOR GRANTS YOU THE RIGHTS CONTAINED HEREIN IN CONSIDERATION
OF YOUR ACCEPTANCE OF SUCH TERMS AND CONDITIONS. IF YOU DO NOT
AGREE TO ACCEPT AND BE BOUND BY THE TERMS OF THIS LICENSE, YOU
CANNOT MAKE ANY USE OF THE WORK.
http://www.jclark.com/xml/expat.html
Expat License. Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center
Ltd
Front panel
Display
Rear panel
270
Remote
Index
Contents
Connections
Playback
Settings
Definitions. “Articles” means, collectively, all articles written by Author which
describes how the Source Code and Executable Files for the Work may be used by a
user.
“Author” means the individual or entity that offers the Work under the terms of this
License.
“Derivative Work” means a work based upon the Work or upon the Work and other
pre-existing works.
“Executable Files” refer to the executables, binary files, configuration and any
required data files included in the Work.
“Publisher” means the provider of the website, magazine, CD-ROM, DVD or other
medium from or by which the Work is obtained by You.
“Source Code” refers to the collection of source code and configuration files used to
create the Executable Files.
“Standard Version” refers to such a Work if it has not been modified, or has been
modified in accordance with the consent of the Author, such consent being in the full
discretion of the Author.
“Work” refers to the collection of files distributed by the Publisher, including the
Source Code, Executable Files, binaries, data files, documentation, whitepapers and
the Articles.
“You” is you, an individual or entity wishing to use the Work and exercise your rights
under this License.
Display
Rear panel
Appendix
You may otherwise modify Your copy of this Work (excluding the Articles) in any way
to create a Derivative Work, provided that You insert a prominent notice in each
changed file stating how, when and where You changed that file.
You may distribute the standard version of the Executable Files and Source Code or
Derivative Work in aggregate with other (possibly commercial) programs as part of a
larger (possibly commercial) software distribution.
The Articles discussing the Work published in any form by the author may not be
distributed or republished without the Author’s consent. The author retains copyright
to any such Articles. You may use the Executable Files and Source Code pursuant to
this License but you may not repost or republish or otherwise distribute or make
available the Articles, without the prior written consent of the Author.
Any subroutines or modules supplied by You and linked into the Source Code or
Executable Files this Work shall not be considered part of this Work and will not be
subject to the terms of this License.
Patent License. Subject to the terms and conditions of this License, each Author
hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free,
irrevocable (except as stated in this section) patent license to make, have made, use,
import, and otherwise transfer the Work.
Restrictions. The license granted in Section 3 above is expressly made subject to
and limited by the following restrictions: You agree not to remove any of the original
copyright, patent, trademark, and attribution notices and associated disclaimers that
may appear in the Source Code or Executable Files.
You agree not to advertise or in any way imply that this Work is a product of Your
own.
The name of the Author may not be used to endorse or promote products derived
from the Work without the prior written consent of the Author.
You agree not to sell, lease, or rent any part of the Work. This does not restrict you
from including the Work or any part of the Work inside a larger software distribution
that itself is being sold. The Work by itself, though, cannot be sold, leased or rented.
Fair Use/Fair Use Rights. Nothing in this License is intended to reduce, limit, or
restrict any rights arising from fair use, fair dealing, first sale or other limitations on the
exclusive rights of the copyright owner under copyright law or other applicable laws.
License Grant. Subject to the terms and conditions of this License, the Author hereby
grants You a worldwide, royalty-free, non-exclusive, perpetual (for the duration of the
applicable copyright) license to exercise the rights in the Work as stated below: You
may use the standard version of the Source Code or Executable Files in Your own
applications.
You may apply bug fixes, portability fixes and other modifications obtained from the
Public Domain or from the Author. A Work modified in such a way shall still be
considered the standard version and will be subject to this License.
Front panel
Tips
271
Remote
Index
Contents
Connections
Playback
Settings
You may distribute the Executable Files and Source Code only under the terms of
this License, and You must include a copy of, or the Uniform Resource Identifier for,
this License with every copy of the Executable Files or Source Code You distribute
and ensure that anyone receiving such Executable Files and Source Code agrees
that the terms of this License apply to such Executable Files and/or Source Code.
You may not offer or impose any terms on the Work that alter or restrict the terms of
this License or the recipients’ exercise of the rights granted hereunder. You may not
sublicense the Work. You must keep intact all notices that refer to this License and to
the disclaimer of warranties. You may not distribute the Executable Files or Source
Code with any technological measures that control access or use of the Work in a
manner inconsistent with the terms of this License.
You agree not to use the Work for illegal, immoral or improper purposes, or on pages
containing illegal, immoral or improper material. The Work is subject to applicable
export laws. You agree to comply with all such laws and regulations that may apply to
the Work after Your receipt of the Work.
Display
Rear panel
Appendix
This License and the rights granted hereunder will terminate automatically upon any
breach by You of any term of this License. Individuals or entities who have received
Derivative Works from You under this License, however, will not have their licenses
terminated provided such individuals or entities remain in full compliance with those
licenses. Sections 1, 2, 6, 7, 8, 9, 10 and 11 will survive any termination of this
License.
If You bring a copyright, trademark, patent or any other infringement claim against
any contributor over infringements You claim are made by the Work, your License
from such contributor to the Work ends automatically.
Subject to the above terms and conditions, this License is perpetual (for the duration
of the applicable copyright in the Work). Notwithstanding the above, the Author
reserves the right to release the Work under different license terms or to stop
distributing the Work at any time; provided, however that any such election will not
serve to withdraw this License (or any other license that has been, or is required to
be, granted under the terms of this License), and this License will continue in full
force and effect unless terminated as stated above.
Representations, Warranties and Disclaimer. THIS WORK IS PROVIDED “AS IS”,
“WHERE IS” AND “AS AVAILABLE”, WITHOUT ANY EXPRESS OR IMPLIED
WARRANTIES OR CONDITIONS OR GUARANTEES. YOU, THE USER, ASSUME
ALL RISK IN ITS USE, INCLUDING COPYRIGHT INFRINGEMENT, PATENT
INFRINGEMENT, SUITABILITY, ETC. AUTHOR EXPRESSLY DISCLAIMS ALL
EXPRESS, IMPLIED OR STATUTORY WARRANTIES OR CONDITIONS,
INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, MERCHANTABLE QUALITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR ANY WARRANTY OF TITLE OR NONINFRINGEMENT, OR THAT THE WORK (OR ANY PORTION THEREOF) IS
CORRECT, USEFUL, BUG-FREE OR FREE OF VIRUSES. YOU MUST PASS THIS
DISCLAIMER ON WHENEVER YOU DISTRIBUTE THE WORK OR DERIVATIVE
WORKS.
Indemnity. You agree to defend, indemnify and hold harmless the Author and the
Publisher from and against any claims, suits, losses, damages, liabilities, costs, and
expenses (including reasonable legal or attorneys’ fees) resulting from or relating to
any use of the Work by You.
Limitation on Liability. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE
LAW, IN NO EVENT WILL THE AUTHOR OR THE PUBLISHER BE LIABLE TO YOU
ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL,
PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE
USE OF THE WORK OR OTHERWISE, EVEN IF THE AUTHOR OR THE
PUBLISHER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Termination.
Front panel
Tips
Publisher. The parties hereby confirm that the Publisher shall not, under any
circumstances, be responsible for and shall not have any liability in respect of the
subject matter of this License. The Publisher makes no warranty whatsoever in
connection with the Work and shall not be liable to You or any party on any legal
theory for any damages whatsoever, including without limitation any general, special,
incidental or consequential damages arising in connection to this license. The
Publisher reserves the right to cease making the Work available to You at any time
without notice
Miscellaneous
This License shall be governed by the laws of the location of the head office of the
Author or if the Author is an individual, the laws of location of the principal place of
residence of the Author.
If any provision of this License is invalid or unenforceable under applicable law, it
shall not affect the validity or enforceability of the remainder of the terms of this
License, and without further action by the parties to this License, such provision shall
be reformed to the minimum extent necessary to make such provision valid and
enforceable.
272
Remote
Index
Contents
Connections
Playback
Settings
http://www.xiph.org/vorbis/
Copyright (c) 2002-2004 Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
o libogg
http://www.xiph.org/ogg/
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Display
Rear panel
Appendix
o libvorbis
No term or provision of this License shall be deemed waived and no breach
consented to unless such waiver or consent shall be in writing and signed by the
party to be charged with such waiver or consent.
This License constitutes the entire agreement between the parties with respect to the
Work licensed herein. There are no understandings, agreements or representations
with respect to the Work not specified herein. The Author shall not be bound by any
additional provisions that may appear in any communication from You. This License
may not be modified without the mutual written agreement of the Author and You
Front panel
Tips
o Tremolo
http://wss.co.uk/pinknoise/tremolo
Copyright (C) 2002 – 2009 Xiph.org Foundation Changes Copyright (C) 2009 – 2010
Robin Watts for Pinknoise Productions Ltd
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
273
Remote
Index
Contents
Connections
Playback
Settings
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
o Mersenne Twister
http://www.math.sci.hiroshima-u.ac.jp/~m-mat/MT/MT2002/CODES/mt19937ar.c
Copyright (C) 1997 – 2002, Makoto Matsumoto and Takuji Nishimura,
All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
The names of its contributors may not be used to endorse or promote products
derived from this software without specific prior written permission.
o Tremor
http://wiki.xiph.org/index.php/Tremor
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
0 Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
0 Redistributions in binary form must reproduce the above copyright notice, this list
of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
0 Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
Display
Rear panel
Appendix
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
Front panel
Tips
274
Remote
Index
Contents
Connections
Playback
Settings
http://curl.haxx.se
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 – 2011, Daniel Stenberg, <daniel@haxx.se>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose with or
without fee is hereby granted, provided that the above copyright notice and this
permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
o zlib
http://www.zlib.net/
zlib.h -- interface of the “zlib” general purpose compression library version 1.2.3, July
18th, 2005
Except as contained in this notice, the name of a copyright holder shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Software
without prior written authorization of the copyright holder.
Copyright (C) 1995 – 2004 Jean-loup Gailly and Mark Adler
This software is provided “as-is”, without any express or implied warranty. In no event
will the authors be held liable for any damages arising from the use of this software.
o c-ares
Permission is granted to anyone to use this software for any purpose, including
commercial applications, and to alter it and redistribute it freely, subject to the
following restrictions:
http://c-ares.haxx.se
Copyright 1998 by the Massachusetts Institute of Technology.
The origin of this software must not be misrepresented; you must not claim that you
wrote the original software. If you use this software in a product, an acknowledgment
in the product documentation would be appreciated but is not required.
Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
This notice may not be removed or altered from any source distribution.
Permission to use, copy, modify, and distribute this software and its documentation
for any purpose and without fee is hereby granted, provided that the above copyright
notice appear in all copies and that both that copyright notice and this permission
notice appear in supporting documentation, and that the name of M.I.T. not be used
in advertising or publicity pertaining to distribution of the software without specific,
written prior permission. M.I.T. makes no representations about the suitability of this
software for any purpose. It is provided “as is” without express or implied warranty.
Jean-loup Gailly jloup@gzip.org, Mark Adler madler@alumni.caltech.edu
Display
Rear panel
Appendix
o cURL
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Front panel
Tips
275
Remote
Index
Contents
Connections
Playback
Settings
Tips
o License information for the software used in
the unit
About GPL (GNU-General Public License), LGPL (GNU Lesser
General Public License) License
This product uses GPL/LGPL software and software made by other
companies.
After you purchase this product, you may procure, modify or distribute
the source code of the GPL/LGPL software that is used in the product.
Marantz provides the source code based on the GPL and LPGL
licenses at the actual cost upon your request to our customer service
center.
However, note that we make no guarantees concerning the source
code.
Please also understand that we do not offer support for the contents of
the source code.
Front panel
Display
Rear panel
276
Remote
Index
Appendix
.
D&M Holdings Inc.
3520 10338 00AM
277