Saflok Product Catalog
Saflok
Product
Catalog
Order Guide
November 2017
Saflok Product Catalog / Order Guide
Table of Contents
06
HOW TO USE THE CATALOG
47
07
Access Control Systems
AMBIANCE ACCESS MANAGEMENT SOFTWARE
Overview
Ordering
SAFLOK SYSTEM 6000
Overview
Ordering
SAFLOK MESSENGER LENS OVERVIEW
Overview
Ordering System 6000 & Messenger Components
SAFLOK ENCODERS
Overview
Ordering
48
51
07
09
10
12
13
16
17
21
22
26
31
32
34
35
37
38
40
43
45
2
Electronic Door Locks
CONFIDANT RFID KIT 1 (NOT AVAILABLE IN NORTH AMERICA)
Overview
Ordering
Spare parts
CONFIDANT RFID KIT 2 (NOT AVAILABLE IN NORTH AMERICA)
Ordering
Spare parts
CONFIDANT RFID KIT 3 (NOT AVAILABLE IN NORTH AMERICA)
Ordering
Spare parts
CONFIDANT RFID (ANSI MORTISE LOCK CASE)
Overview
Ordering
Spare parts
55
58
64
66
69
72
85
86
88
90
93
93
94
96
98
99
101
103
104
Electronic Door Locks (continued)
SAFLOK RT RFID
Overview
Ordering
SAFLOK MT SERIES
Overview
Ordering
SAFLOK ÄDƏSE
Overview
Ordering
SAFLOK QUANTUM SERIES
Overview
Ordering
SAFLOK QUANTUM IV
Overview
Ordering
SAFLOK QUANTUM PIXEL
Overview
Ordering
Perimeter Access
SAFLOK RFID
Overview
SAFLOK SR3 FOR QUESTROOMS
Overview
Ordering
SAFLOK REMOTE CONTROL UNIT (RCU)
Overview
Accessories
Suggested Applications
SAFLOK ELEVATOR CONTROL UNIT (ECU)
Overview
Ordering
Saflok Product Catalog / Order Guide
122
122
123
130
132
134
134
135
136
138
140
142
145
145
146
148
149
Perimeter Access (continued)
EXIT DEVICE HARDWARE OVERVIEW
Overview
Ordering
E-PLEX 2000 SERIES
Overview
Ordering
Lock Accessories
CORES, CYLINDERS FOR SAFLOK RT SERIES
Ordering
KEYS FOR SAFLOK RT SERIES
Ordering
DECORATIVE PLATES FOR SAFLOK RT SERIES
Ordering
MISCELLANEOUS PLATES
Ordering
STRIKES FOR SAFLOK RT SERIES
Ordering
MISCELLANEOUS PARTS FOR SAFLOK RT SERIES
Ordering
Complimentary Products
ELECTRONIC IN-ROOM SAFE
Overview
Ordering
KEYCARDS & PRINTING
Overview
Ordering
3
Saflok Product Catalog / Order Guide
4
Access Control Systems
Saflok Product Catalog / Order Guide
How to use the Catalog
In some situations the part number has to be assembled to specify the product and the desired options.
This is done by creating a number for your required options, as shown in the example below:.
Saflok Product Catalog / Order Guide
Confidant RFID Kit 2 (European Mortise Lock Case)
Ordering
37.5mm
60mm
60mm
283mm
283mm
117.5mm
117.5mm
23.5
mm
76.1mm
17mm
69.8mm
Front Side
Front
Back side
Inside
Standard Model Number
C
S
00
Lock Model
K
0
S
7
Outside housing
Options
Bluetooth
4
C
R
N
Installation Options
P
S
Most common
model ordered
Inside housing Options
Build the model number with the required options
00
R0
Messenger
Ready
M1
Messenger
US
0
BLE
Compatible
1
BLE Ready
2
BLE Enabled
D
BLE
Compatible
Messenger Demo
EU/Asia
E
M2
M3
Messenger
Int'nl
MW
BLE Enabled
Demo
Installation Options
Inside housing Options
K
Cylinder
Support
E
No
Cylinder
S
Short
Return
7
4
8
5
7mm
8 mm
L
9
Long
Return
(approved
for EN 179)
9 mm
(Required
for DIN
certified
locks)
D
Austria
8.5 mm
B
DIN Lever
(approved
for EN179)
Inncomm
N0
Escape
Return
Standalone
6
N
No Lever
* Inside cylinder support not available with privacy thumbturn option.
** Backplate mount only available with M5 screws.
*** Rose Mount only available with M4 screws.
30
M4
M5
C
Satin
Chrome
Interior
B
Satin Brass
Interior
E
Satin
Chrome
Exterior
H
Satin Brass
Exterior
U
Satin
Chrome
Ocean-front
*C
**B
N
Rose Mount
Backplate
mount
Euro profile or
Swiss cylinder
No cylinder
Privacy
Cylinder
Support
***R
N
No
Thumbturn,
no Privacy
P
Privacy
Thumbturn
Part number
with your options
Inside Lever
Outside housing
Options
Mounting
Plate
Inside housing Options
Finish
00
Saflok Stand
alone
Installation Options
Mounting
Screw
S
Bluetooth
Outside housing
Options
Spindle Kit
Operating
System
C
System
(Fixed value)
Confidant
RFID
(Fixed value)
Lock Model
Bluetooth
Outside Lever
Lock Model
Cylinder
Support
S
Bluetooth
C
S
Short
L
Long Return
D
DIN Lever
(approved
for EN179)
Requires
9mm spindle
N
No Lever
Select your
options from
these sections
Saflok Product Catalog / Order Guide
Ambiance™
Access Management Software
System Overview
Ambiance is the next generation access management software solution.
Developed to be operating system and hardware flexible, Ambiance offers
the ability to be deployed on a mobile device or traditional workstation
without usability loss due to its HTML5 architecture. Backed by a library
of web services and Application Program Interfaces (API), the software
has been designed to easily interface with third party tools such as your
Property Management System (PMS).
Application
Customers can change in minutes and manage Ambiance locally: property
configuration, user and staff management, access management and
scheduling are now easier to control than ever before. They can configure
and change their access controls to meet their property needs.
Whether customers are managing one desk or one thousand, Ambiance
provides Performance, Scalability, Efficiency.
Out-of-the box solution
dormakaba offers flexible deployment options to meet the property's particular needs and IT resources.
Customers will enjoy our out-of-the box, installation package, as we will take care of their needs while they take care of
their guests.
Features
• Bluetooth enabled
• Multi-site property management
• Access scheduling
• Staff scheduling
• Elevator, meeting rooms, common areas & amenities access management
• Configurable roles & user profiles
• Active directory user controls
• Real-time monitoring
• Advanced reporting
7
Saflok Product Catalog / Order Guide
Ambiance™
Access Management Software
System Features
System Benefits
• An expandable solution to meet customer needs: Ambiance will help increase ROI
• From flexible out-of-the-box hosted solutions to personalized on-site solutions
• Robust library of web services to integrate to third party software for real-time connectivity
• Layered architecture to ensure scalability without performance issues
• Minimizing configuration and set up to minutes instead of hours
• Flexible hardware and operating system solutions to meet decor and budget
• Supports fast training and ease of use
• Compatible with most dormakaba Lodging locking systems, including BLE (Bluetooth Low Energy) electronic locks
Property Management
Easily manage property configurations to reflect customer brand and apply their default settings to your guests’ stay.
Customer can define elevator controls, peripheral access points, guest check in/out, default key expiry (guest & staff),
amenities, pre-registration defaults and failsafe keys in case of power outage.
Guest Registration
Customers can integrate Ambiance to their property management software or use its guest registration module to
manage guest keys. Properties can quickly manage guest access services from pre-registration, to check-in to check-out,
and manage amenity access, provide additional keys and modify access with only a click or two.
Staff Access Management
Customer are in full control of their staff access. User role management and creation ensures that only authorized users
have access to their defined features when using the Ambiance solution. Manage staff member property access using
staff profiles, scheduling and automated common area access management. Key status is also easily managed through
Ambiance with a selection of system keys that disable specific key instances, perform access point diagnostics, disable all
non-emergency keys, cancel current guest access and enable/disable passage mode.
Audit & Reporting
Ambiance features full key and lock auditing and reporting. Simple key readback is available within the software solution
and full lock auditing is available using dormakaba’s maintenance unit (included). Know who, when and where access any
given point with a few simple clicks.
8
Saflok Product Catalog / Order Guide
Ambiance™
Access Management Software
Ordering
Lock System Kits
Standard Model (Example)
S K A
1
System
Version
Q R
I
Locking Device
P R
F
H
Encoder
6
0
Handheld
0 0
Power Adapter
0
Custom
Build the model number with the desired options
S K A
1
System
Version
Style
SKA
System Kit
Ambiance
I
Locking Device
Version
1
QR
RT
RT RFID
CR
F
H
Encoder
Lock
Quantum RFID
P R
dormakaba RFID Encoder
0 0
Handheld
Encoder
IPRF
6
Power Adapter
Handheld
H6
HH6
Custom
Power Adapter
0
North America
1
0
Custom
000
Standard
International*
Confidant RFID
9
Saflok Product Catalog / Order Guide
Saflok System 6000TM
System Overview
Saflok System 6000 is a windows based access management software capable of interfacing with your existing property
management system (PMS), and is customizable to suit your property’s specific needs.
System 6000 provides the security of an access audit system, the ultimate in key management flexibility and superior
control throughout your property. It is compatible with all Saflok lock models such as Quantum Series, MT series, RT,
ädƏse and Confidant RFID.
Application
Access management scheduling for both guests and staff
• Supports elevator, common area and perimeter access management
Features
• Supports mobile access through Saflok RFID BLE (Bluetooth Low Energy) locks
• Multiple user profiles to ensure secure access.
• Quick key read back and replacement features for lost and found cards
• Couple with dormakaba’s Messenger LENS for an online/real-time room management solution
• Integrates to a variety of third party solutions including PMS, POS, energy management and selfcheck- in kiosks
• Extensive reporting library including key creation, user/group authorizations, and much more.
• Securely programs and encodes keycards and accessories
10
Saflok Product Catalog / Order Guide
Saflok System 6000TM
System Features
System Benefits
• Access key identification, verification and interrogation
• Interrogates smart, memory and Mifare Classic (4 byte NUID) 1K/4K keycards and other media
• Produces reports of up to 1,000 of the most recent uses with detailed information (user and authorization, transaction
history, lock and key interrogation)
• Allows access programing to open multiple rooms with one keycard or mobile device
• Allows fully-customized access to specific areas or floors for both guest and staff
• Lock Passage mode programing available for perimeter access
• Restricts access to guest keycard/ mobile device after check-out date
• Seamlessly integrates with dormakaba mobile access solution, allowing guests to receive their room key on their mobile
device prior their arrival and bypass the front-desk check-in process
System 6000 Plus
This upgradable feature to System 6000 allows properties to implement simple design changes quickly and easily:
• Add a new lock
• Remote key encoding: enables keycard encoding from a remote location, facilitating check-in and allowing guests to
receive their room keys prior to arrival
• Creates access keys for large groups of guests (convention, wedding, etc.) weeks ahead of time for specific dates of
stay
11
Saflok Product Catalog / Order Guide
Saflok System 6000TM
Ordering
Lock System Kits
Standard Model (Example)
S K
6
System
2
C A
Version
Locking Device
T
7 M G
H
Encoder
Handheld
6
0
0 0
Power Adapter
0
Custom
Build the model number with the desired options
S K
6
System
Style
SK6
System Kit 6000
2
C A
Version
Locking Device
Version
2
H
Encoder
Lock
CA
Card locks
QR
Quantum RFID
RT
RT RFID
CR
Confidant RFID
Encoder
6
0 0
Handheld
Power Adapter
Handheld
Power Adapter
MAG CARD ONLY: H6
HH6
T7MG
0
T7MT
International*
Type 7 Mag/SMT
Custom
North America
1
Custom
000
Standard
Type 7 Mag
T7MH
Type 7 Hico/Mag
INSW
Insertion Wide
RFID ONLY:
T7RG
Type 7 Mag/SMT/RFID
T7RF
Type 7 Mag/RFID
T7RH
Type 7 Hico/Mag/SMT/RFID
NETR
Network RFID
IPRF**
dormakaba RFID Encoder
* International power adapter includes global power plug kit and 110/220V compatible power supply
** Aux terminal not available with dormakaba RFID encoder. Only Network RFID encoder and Type 7 series function with Aux Terminal
System 6000 Software Packages
Part #
Description
SK61-CAINSWH60000 SK61-CAINSWH61000
SK61-CAT7MTH60000 SK61-CAT7MTH61000
SK61-CAT7MGH60000 SK61-CAT7MGH61000
SK61-QRT7RGH60000
SK61-QRT7RGH61000
SK61-CAT7MHH60000
SK61-CAT7MHH61000
SK61-QRNETRH60000
SK61-QRNETRH61000
SK61-RTNETRH60000
SK61-RTNETRH61000
SK61-QRT7RFH60000
SK61-QRT7RFH61000
SK61-QRT7RHH60000
SK61-QRT7RHH61000
System 6000, Insertion Encoder
System 6000, Insertion Encoder (International)
System 6000, Type 7 Encoder
System 6000, Type 7 Encoder (International)
System 6000, Type 7 Mag / Smart Card Encoder
System 6000, Type 7 Mag / Smart Card Encoder (International)
System 6000, Type 7 Mag / Smart / RFID Encoder
System 6000, Type 7 Mag / Smart / RFID Encoder (International)
System 6000, Type 7 Mag / Smart / HiCo Encoder
System 6000, Type 7 Mag / Smart / HiCo Encoder (International)
System 6000, Network RFID Encoder
System 6000, Network RFID Encoder (International)
System 6000, Network RFID Encoder for RT
System 6000, Network RFID Encoder for RT (International)
System 6000 Type 7 Mag / RFID Encoder
System 6000 Type 7 Mag / RFID Encoder (International)
System 6000 Type 7 Mag / Smart / HiCo / RFID Encoder
System 6000 Type 7 Mag / Smart / HiCo / RFID Encoder (International)
12
0
Saflok Product Catalog / Order Guide
Saflok Messenger LENSTM
Wireless Online System
System Overview
The Saflok Messenger LENS is a wireless online system, ideal for hotels seeking the ultimate in security and guest
experience while maximizing operational efficiency. The wireless online system offers a two-way communication between
the front desk and the hotel’s electronic locks. Messenger LENS serves to monitor and manage room door activity. Guests
can easily request room moves without having to return to the front desk. Hotels can monitor door activity through
notifications sent directly to email and text messaging. Messenger LENS also integrates to third party applications for
even greater room management control and flexibility.
System Features
• Radio Frequency (RF) communications at 2.4 GHz, which is globally license-free
• Secure networking (128 AES encryption)
• Self-forming networks
• Zigbee Prostack standard (large scale, network stability, resilient)
- Ideal for large scale properties (thousands of nodes)
- Asymmetric link handling
- Network stability even when modes are within close proximity
- Extended battery life with deep and special parent functions
- Resilient – ensured by frequency agility
• Messenger LENS subscriber disseminates information to authorize recipients in real time
Third-Party
Server
Messenger
Hub
TCP/IP
PMS Server
ESB
Third-Party Coordinators
(Serving one or several rooms)
Messenger
Hub
Server: Messenger™
& System 6000™
Front Desk
Workstation
Messenger LENS is an available option for Saflok electronic hotel locks.
13
Saflok Product Catalog / Order Guide
Saflok Messenger LENSTM Wireless
Online System
How does it work?
The Messenger LENS system meets key market needs helping as the ideal link for sending and receiving real-time
messages. With a broad range of functionality, Messenger enhances guest convenience, reduces expenses, and conserves
staff time.
1. Send Lock Commands directly from the front desk
Remote Keycard Audits
Keycard Replacement
Remotely interrogate specific
locks for keycard usage.
Send a “Cancel Key” message to
each lock that was presented with
a previous keycard.
Room move
Extend a Guest’s Stay
Send a message to the new
room door lock to accept the
customer’s current keycard.
Send a message to the guest
room lock to update the access
expiration date.
2. Receive Lock Alerts & Notifications
Door Ajar
Be notified when a door has
been left ajar and when it
returns to its secure position.
Wandering or Standing Intruder
Receive alerts when a keycard
fails on multiple doors or when
multiple cards fail on one door.
Low Battery
Receive low battery reports
for preventative maintenance.
Room Ready
Send a “Room Clean” message in
real time for better room management.
3. Share Lock Information with 3rd Party Systems
14
Smart Room Automation
Workflow Management
Door lock sends a command to
the smart hub to adjust in-room
amenities such as TV, lights
or drapes to a customized
configuration depending upon
preset guest preferences.
Door lock communicates with a
workflow system that sets up a
task for a staff member to
complete and close. For example,
bringing a bottle of wine when a
VIP guest first enters the room.
Saflok Product Catalog / Order Guide
Saflok Messenger LENS Hub
Specifications
Standards / Protocols I/O Port Cabling Type
RF Data Rate RF Sensitivity Transmit Power Dimensions Unit Weight Power Input Alternate Power Input Certifications Operating Temperature Indoor Range Package Options 2.4 GHz DSS, IEEE 802.15.4, Zigbee compliant platform, DHCP, DNS Discovery
1 x 10 Mbit PoE capable Ethernet
Ethernet – RJ45 Cat 5 or better
3 Mbps
Better than -97dBm
10 mW for 71562 (Europe/Asia)
158 mW for 71563 (North America)
87 mW for 71564 (International)
6” x 3 1/2” x 1” (Wall Mount) 6” x 3 1/2” x 7/8” (Table Top)
200 grams
802.3af PoE, 2 watts
External 5VDC 300mA (-ZBW & ZBWE models only)
Part 15.247 Modular License – FCC ID:SAPMESSENGER2GHZ
Europe and Canada CE Approval – IC: 7078A-A28780
China Radio Approval – CMIIT ID: 2009DJ0666 (71562 only)
0 to 55 degrees Celsius
External 5VDC 300mA (-ZBW & ZBWE models only) 30 meters (74562)
74564-ZAW, 74563-ZAW, 74562-ZAW, J-box wall mount (POE only)
74564-ZBW, 74563-ZBW, 74562-ZBW, Table Top
74564-ZAWE, 74563-ZAWE, 74562-ZAWE, J-box wall mount (Environmental)
74564-ZBWE, 74563-ZBWE, 74562-ZBWE, Table Top (Environmental)
Wall Mount (ZAW)
Table Top (ZBW)
* Port locations shown for desktop package (ZBW)
15
Saflok Product Catalog / Order Guide
Saflok System 6000 &
Messenger LENS Components
Ordering
Computer Equipment and Messenger Equipment
Part #
Description
CE74390
Secure Shift Advanced, POE kit
CE74400
Secure Shift Advanced, W/Power Supply
71940
Power Supply, Secure Shift Advanced (Requires outlet cable)
7081602-P
System 6000 Disc
DOC-CD-6000
Training CD, System 6000
CH899099
System 6000 Handheld Kit (Unit, Base Charger, Power Supply, Cable and Battery)
CH899199
System 6000 Handheld Kit International (Unit, Base, Charger, Power Supply, Cable & Battery)
011-512884
Cable, HH6, USB, PC Interface
126-513412
Power Supply, HH6, North America
126-513481-KIT
Power Supply, HH6, International
7081602-PLUS
System 6000 PLUS Program Disc (and on-site support)
SERVER License
MS 2008 Server License
(one required per Messenger system with 1-4 stations)
7081620-MSNGR
Messenger Software (per property)
SERVERCAL
1 required per system (1-4 stations)
7081620-MDMulti-Database
CD61
Desktop Server (non-Messenger/IR system)
CE71331-R1
Server, Messenger, Rack Mount (Needed with Messenger and IR installations)
No keyboard, mouse, or monitor
73763-2
Power Supply, Type 7 Encoder (Requires outlet cable)
737611
Power Outlet Cable
73270
Power Supply, Network RFID Encoder, Insertion Encoder, Messenger Hub
CE71331-TS1
Server, Messenger, Tower (Needed with Messenger and IR installations)
Includes keyboard and mouse, but no monitor
CE74562-ZAW2
Messenger Hub, Europe / Asia, Wall Mounted, PoE
CE74562-ZBW2
Messenger Hub, Europe / Asia, Table Top, PoE
CE74562-ZAWE2
Messenger Hub, Europe / Asia, Wall Mounted, PoE, Weatherized
CE74562-ZBWE2
Messenger Hub, Europe / Asia, Table Top, PoE, Weatherized
CE74563-ZAW2
Messenger Hub, North America, Wall Mounted, PoE
CE74563-ZBW2
Messenger Hub, North America, Table Top, PoE
CE74563-ZAWE2
Messenger Hub, North America, Wall Mounted, PoE, Weatherized
CE74563-ZBWE2
Messenger Hub, North America, Table Top, PoE, Weatherized
CE74564-ZAW2
Messenger Hub, International, Wall Mounted, PoE
CE74564-ZBW2
Messenger Hub, International, Table Top, PoE
CE74564-ZAWE2
Messenger Hub, International, Wall Mounted, PoE, Weatherized
CE74564-ZBWE2
Messenger Hub, International, Table Top, PoE, Weatherized
71690
RFID Probe, HH6
74370
Mag Probe, HH6
75800
ELPS, HH6
A21100
Battery Backup, RFID
063-512592
RT RFID Probe, HH6
71982
Confidant RFID Probe, HH6
71790-1
SR Probe, Keyscan Reader, HH6
71800-1
Keyscan Reader, SR, HH6
Servers can be sourced elsewhere, provided they meet Saflok system specifications/requirements
All hubs in white only
PMS is included with System 6000 install
1
2
16
Saflok Product Catalog / Order Guide
Saflok Encoders
Overview
Saflok encoders are a vital component of all access control systems, transmitting information and commands to/from a
credential. Each system is configured to suit the unique requirements of a property.
Insertion Encoder
•The fastest encoder in the Saflok product line
•Durable and tested to one million cycles
•Virtually maintenance-free with maintenance only required for read head
•Uses card sensing-device that detects card direction without contact or
wear on keycard surface
•Spring-loaded encoding/playback head adapts to variations in keycard
thickness
•Reads upon insertion and checks code upon withdrawal; card slot
illuminates green if validated and red if rejected
•Input/output for USB, serial, or TCP/IP connectivity
•Encodes data to track 3
•Granted both utility and design patent
Dimensions
4.9”H x 3.9”D x 4”W
Power
6 V DC, .3 A
Keycards Encoded
Smart, memory, and magstripe
Connectivity
USB, serial, or TCP/IP
Keycard coercivity
Low-coercivity keys (300OE)
Medium-coercivity keys (600OE)
Insertion Encoder
Network RFID Encoder
•Connects directly to PC via USB or to Ethernet network via TCP/IP
•Connects to DeskLinc™ via serial port
•Supports Mifare Classic (4 byte NUID) Mifare Plus and
Mifare Ultralight C credentials
•Operates in accordance with ISO 14443A
• Encodes a variety of RFID credentials, such as keycards, fobs, wristbands, etc.
•Used in conjunction with Saflok RFID locks
Dimensions
1.5”H x 6”D x 3.3”W
Keycards Encoded
Mifare Classic (4 byte NUID)
Mini, 1K, 4K. Mifare RFID Plus 2K,
4K, and Ultralight C
Connectivity
To PC via USB or serial port; to
Ethernet network via TCP/IP port
17
Saflok Product Catalog / Order Guide
Saflok Encoders
Overview
dormakaba’s RFID encoder is a vital component that operates with the Saflok access
management platforms to authorize access throughout the property.
It encodes RFID keycards and other media with data & commands for both guest and
staff level access. A choice of USB or network connectivity enhances both front desk
efficiency and employee convenience.
Applications
• Suitable for all hotel sizes
• Encodes a variety of RFID accessories including keycards, fobs and wristbands
• Encodes access to guest rooms, common areas and back-of-house
dormakaba
RFID encoder
Features
• Securely encodes keycards and accessories
• Power source: USB interface (5V) or Power over Ethernet (PoE)
• TCP/IP interface to connect directly to an Ethernet Network (no software to install on the client workstation)
• Support RFID keycards or tags (ISO 14443-A)
• Supports Mifare Classic (Mini, 1K, 4K), Mifare Plus (1K,2K,4K) and Ultralight C credentials
Access Management Platforms
The RFID encoder works with both dormakaba’s stand-alone devices and robust access management software solutions
that features an array of access control workflows for both guest and staff access.
RFID electronic locks
• Saflok Quantum RFID Series
• Saflok MT RFID
• Saflok RT
• Confidant RFID
Physical Characteristics
USB 2.0 Full Speed Device Interface (micro type B)
10/100 Mbit Ethernet Interface (RJ-45)
Dimensions: 3.15W x 0.97H x 5.37L inches (80W x 25H x 137L mm)
Weight: 0.275 lbs (0.124kg)
Operation LED
Audio Indicator
Power Source
USB Interface (5V) or Power over Ethernet (PoE)
Environmental Operating Conditions
Temperature: 0ºC to 50ºC (32ºF to 122ºF) Relative humidity: 0% to 95% non-condensing
Certifications, Approvals and Testing
RoHS Compliant Complies with FCC part 15C class A and RSS 210
Complies with CE Harmonized EN under article 3.2 of the R&TTE Directive
Warranty
2 years
Support Progam: dormakaba Service Plans available
18
Saflok Product Catalog / Order Guide
Saflok Encoders
Overview
Saflok Type 7 Encoder
•Three-track motorized magstripe encoder
•Connects directly to PC via USB or serial port or to Ethernet network via TCP/IP port
•Door lock information encoded on track 3 using custom format (non-ASCII and ABA
format) to prevent magstripe and data skimming
•Ability to encode third-party and point-of-sale device information on tracks 1 and 2
when connected to PMS/POS applications
•Spring-loaded encoding/playback head adapts to variations in keycard thickness
•Ejects keycards with errors or keycards not properly encoded from the back of the unit
Dimensions
3.62” H x 7.1” D x 4.05” W
Keycards Encoded
Mifare Classic (4 byte NUID) Mini, 1K, and 4K.
Mifare Plus S 2K, 4K and Ultralight C
Connectivity
To PC via USB or serial port; to Ethernet
network via TCP/IP port
Type 7 Encoder
Saflok Type 7 RFID Encoder
•Contactless RFID encoder that supports Mifare Classic (4 byte NUID) Mifare Plus
and Mifare Ultralight C credentials
•Encodes a variety of RFID credentials, such as keycards, fobs, wristbands, etc.
•Used in conjunction with Saflok RFID locks
Type 7 RFID Encoder
Encoder Credentials (Type 7 RFID)
Magstripe
SMART/Memory MIFARE/RFID
300OE600OE 2750OE
Low
Medium (up to 4000OE)
Coercivity Coercivity High Coercivity
2KB
8KB
64KB
Mini
1KB
4KB
Magstripe encoder
•
•
Magstripe/Smart card encoder
•
•
•
•
•
HiCo magstripe/Smart card encoder
•
•
•
•
Magstripe/RFID encoder
•
••
•
•
Magstripe/Smart card/RFID encoder
•
•
•
•
•
•
•
•
HiCo magstripe/Smart card/RFID encoder
•
•
•
•
•
•
•
RFID Credential Options
•Mifare Mini: A cost-effective solution for guest keys.
Available with generic printing, hotel chain logos, or custom printing
•Mifare Classic 1K: Ideal for staff use. Available as a fob (for extended-stay guests or staff) or wristbands (for resorts
and waterparks)
•Mifare Classic 4K: Ideal for lock interrogation
•Mifare Plus 2K: Ideal for staff use. Available as a fob (for extended-stay guest or staff) or wristbands (for resorts)
•Mifare Plus 4K: Ideal for lock interrogation
•Mifare Ultralight C: Ideal for guest use
19
Saflok Product Catalog / Order Guide
Saflok Handheld 6 (HH6)
Overview
HH6™ is a portable programming device used for lock programming, interrogations, lock diagnostics and can be used as
an auxiliary key encoding terminal. The HH6 is equipped with new enhanced features keeping staff efficiency in mind,
while incorporating a new sophisticated look and feel.
System Features
•USB connectivity; increased capacity and speed
•Storage capacity: 500+rooms
•Unit can be pre-programmed for the day
•Load a 300+ room property in seconds
•Interrogate 1000 lock events under 2 minutes
•Enhanced configurable security
•Advanced diagnostics
•Auxiliary Terminal functionality for encoding
•Advanced lock search function
•Interrogation reports can be viewed on the display
•Integrated with System 6000 V4
•Power off and backlight timer settings
HH6 Dimensions
20
Height
Depth
Width
1”
7”
3”
Saflok Product Catalog / Order Guide
Saflok Encoders & Handheld
Ordering
Encoders
Part #
CE6100
CERPF6000
CEP4110
CEP4120
CEP4130
CE4010
CE4020
CE4030
CEIPRF6000
Description
Insertion Encoder
Magstripe/Smart Card Encoder
Network RFID Encoder
Encoder Station, Network RFID Encoder
Type 7 RFID Encoder
Encoder Station, Type 7 (Mag / RFID)
Encoder Station, Type 7 (Mag / Smart / RFID)
Encoder Station, Type 7 (Mag / Smart / HiCo / RFID)
Type 7 Encoder
Encoder Station, Type 7 (Mag)
Encoder Station, Type 7 (Mag / Smart)
Encoder Station, Type 7 (Mag / Smart / HiCo)
dormakaba RFID Encoder
Encoder Station, dormakaba RFID Encoder
21
Saflok Product Catalog / Order Guide
22
Electronic Door Locks
Saflok Product Catalog / Order Guide
Door Handing
All locks require specification of door handing. To determine the hand, face the door from the outside and select the
corresponding diagram below.
L - Left Hand
R - Right Hand
X - Left Hand Reverse
(same as LHR or LR)
Y - Right Hand Reverse
(same as RHR or RR)
Lock Function
Standard
These locks remain permanently in locked mode, and for higher security a 1” deadbolt comes standard. This is suitable
for applications where the person in the locked area needs added protection, such as a hotel room or private office. ANSI
equivalent functions: Hotel Guest Lock (F15).
Auto Deadbolt
Same functionality as standard but the deadbolt is automatically projected every time the door is closed. Guest privacy is
activated with the thumbturn knob.
Utility
These locks remain permanently in locked mode and lock each time the door is closed. There is no deadbolt. They are
suitable for storage area doors or utility closets where constant security is required. Exiting from inside the room (Egress)
is possible by turning the handle. ANSI equivalent functions: Storeroom or Closet (F07), Entry Lock (F04), Front Door
Lock (F08), Apartment Corridor Door lock (F10), Room Door Lock (F21).
Exit Device Operator
These locks operate with an exit device to permit controlled access from the outside. The lock mode (passage or locked)
can be changed manually (contactless or insert card). ANSI equivalent functions: Holdback Door (F06).
Remote Controller Unit (RCU), Elevator Controller Unit (ECU)
A card reader used for controlling access in elevators, garages or main doors. The controller interfaces with an elevator
controller, gate controller, electro-magnetic lock, electric strike, exit button or panic bar. The controller mode (passage or
locked) can be changed manually (swipe or insert card).
Dummy Trim
The Dummy Trim lock is for an aesthetic use only. The lock has no mechanical or electronic components. This lock is
usually used on a double door entrance where the second door is bolted down.
Shabbat Lock
These locks are similar to the hotel lock with the exception that on the Shabbat, a different key for each room can be
given to the guest so the access to the room is done totally in a mechanical way. There is no lever or mechanical override
switch used in this lock.
24
Saflok Product Catalog / Order Guide
Installation Type
Installation Types
Factory Prep.*
No work required to prep or adjust door prep
Wood Door; Retrofit (Mortise) *
Door prep requried but mortise pocket exists alread
y
Wood Door; Blank or Retrofit (Cylindrical)*
Full door prep required
Metal Door; Retrofit (Mortise) *
Door prep requried but mortise pocket exists alread
y
Metal Door; Blank or Retrofit (Cylindrical)*
Full door prep required
Axapta / QMS
Part Number
No Frame
No preppring required
on existing frame
Wood Frame
Metal Frame
Prepping required on
existing wood frame
Prepping required on
existing HOLLOW
metal frame
Metal Frame [Grout]
Prepping required on
existing FILLED metal
frame
INST-FP
-NF
-WF
-MF
-MG
INST-WR
-NF
-WF
-MF
-MG
INST-WB
-NF
-WF
-MF
-MG
INST-MR
-NF
-WF
-MF
-MG
INST-MB
-NF
-WF
-MF
-MG
Examples of INST-FP-NF
Door company used our templates to prep doors and frames - our installer will only install and program our locks.
Contractor will purchase our installation jigs and ensure all doors are preped according to template.
Examples of INST-FP-MF
Door company prepped the doors according to our templates, left hollow metal frame unprepped.
Examples of INST-WR-NF
Client has existing Kaba, Onity or Saflok mortise lock.
Examples of INST-MB-MG
Client had new blank Metal door, or existing cylindrical locks, with work required to adjust grout filled metal frame.
25
Saflok Product Catalog / Order Guide
Confidant RFID (European Mortise Lock Case)
Overview
The Confidant RFID asserts a softer, more engaging look to reflect true hospitality. Together with graceful lines and clean
aesthetics, its RFID contactless technology enhances the guest experience while extending the service life of the lock. This
ultra-modern lock conveniently functions with dormakaba access management software and stand-alone device.
Confidant RFID kit options
The Confidant RFID lock comes in a variety of kit options, making it a flexible
solution to meet any property access needs:
• Kit 1: outside lock housing only
• Kit 2: outside / inside housings
• Kit 3: outside / inside housings and mortise lock case
Mobile Access
This Bluetooth Low Energy (BLE) capable lock can operate using the
dormakaba Mobile Access Solutions.Application
Applications
• Perfect fit for new construction projects and replacement of existing
mechanical or electronic hotel locks
• Suitable for small to very large scale hotels
• Access control solution for guest rooms, common areas and back-of-house
Low Maintenance
• Operates with a completely sealed contactless reader
• Batteries last up to 50,000 openings or up to 3 years
• Low battery indicator alerts staff
• Audit trail is retained during battery replacement and lock programming
• Wear-resistant construction and finish
Access Management Software
The Confidant RFID lock is supported by dormakaba’s robust access
management software solution that features an array of access control
workflows for both guest and staff access. Optionally, choose dormakaba’s
online access management solution for better door management and
monitoring.
26
Saflok Product Catalog / Order Guide
Confidant RFID (European Mortise Lock Case)
Overview
Mobile Access Solutions
Convenient, reliable and secure for both the hotel property and guests, dormakaba Mobile Access Solutions is an endto-end mobile credential application utilizing Bluetooth Low Energy (BLE), the preferred communication technology for
dormakaba mobile-enabled RFID hotel locks. The mobile access solution integrates seamlessly with the hotel locking
system providing a cloud-based platform to securely issue and manage keys on mobile devices.
All Confidant RFID kits operate using dormakaba’s mobile access, allowing guests to bypass the front desk check-in
process and proceed directly to their room. They can move freely about the property using their mobile device to access
any common area in the hotel requiring a room key.
27
Saflok Product Catalog / Order Guide
Confidant RFID (European Mortise Lock Case)
Lock Overview
Confidant RFID Kit 1
Outside lock housing only
A simple ‘plug & play’ solution that makes it easier to swap out any existing mechanical
or electronic lock and replace it with RFID lock technology. Compatible with most
standard lock cases, simply install the front lock housing to benefit from all the
features of an RFID electronic lock system.
Security Features
• Vandalism and attack resistant
• Improved tamper resistance; tamper alarm is reset by emergency key or dormakaba
handheld programming device
• Override options - Electronic override: performed by using the dormakaba handheld
programming device
• Emergency access: emergency keycard and electronic override
Confidant RFID Kit 2
Outside / inside lock housings
An upgrade to include both the inside and outside lock housings while remaining
compatible with existing or third party mortise lock cases. This kit also offers electronic
privacy or cylinder turn-knob functionality. Ease of installation makes Confidant RFID
Kit 2 a perfect fit for new construction or replacement of existing mechanical or electronic
hotel locks to complement modern hotel décor.
Inside & Outside Lock Housing
Security Features
• Vandalism and attack resistant
• Improved tamper resistance; tamper alarm is reset by emergency key or dormakaba handheld programming device
• Override options
- Electronic override: performed by using the dormakaba handheld programming device
- Mechanical key override: with key cylinder option
• Emergency access: emergency keycard and electronic override
Confidant RFID Kit 3
Outside / inside lock housings + mortise lock case
The full package, with a complete door hardware installation for existing or new construction properties. The Kit 3
package includes outside/inside lock housings and a compatible mortise lock-case. This kit also offers electronic privacy
or cylinder turn-knob functionality. Ease of installation makes Confidant RFID Kit 3 a perfect fit for new construction or
replacing existing mechanical or electronic hotel locks to complement modern hotel décor.
Security Features
• Vandalism and attack resistant
• Improved tamper resistance; tamper alarm is reset by emergency key or dormakaba handheld programming device
• Override options
- Electronic override: performed by using the dormakaba handheld programming device
- Mechanical key override: with key cylinder option
• Emergency access: emergency keycard and electronic override
28
Saflok Product Catalog / Order Guide
Confidant RFID (European Mortise Lock Case)
Overview
Mechanical Features
Outside Housing
Zinc cast alloy construction with steel mounting plate/Field reversible levers. Ergonomic RFID
reader with target to guide user/LEDs for visual feedback. Panel that conceals key cylinder (if
used), lock batteries (3 alkaline AA type) and programming interface. Spindle socket
Inside Housing
Stainless steel trim with a steel mounting plate construction / Field reversible levers privacy turn
knob (optional)
Levers
Available in short or long return designs. Outside lever free to rotate upward and downward in
locked mode. DIN compliant levers (optional)
Standard Finishes
Satin chrome or satin brass
Short
Long
DIN
Batteries
3 AA batteries for up to 50,000 openings or up to 3 years (based on 10 openings per day). Low
battery indicator: alerts staff that batteries need to be changed soon
Door Applications
35mm - 55mm. Minimum backset: 40mm or more. Wood or metal, hollow or solid. Rosette
mounting option eliminates the need for drilling (retrofit scenario)
Hardware
Configurations
Kit 1 includes outside lock housing and installation hardware kit
Kit 2 includes outside lock housing, inside lock housing and installation hardware kit
Kit 3 includes outside lock housing, inside lock housing, BMH 801 lock case and installation
hardware kit
Locking Option
Online Configurations
Mobile Access Options
BLE ready
BLE enabled
Lock Operation
Date/Time Stamp
Programming & Audit
Trail Downloading
Preregistered Keycards
Keycard Expiry
Passage Mode
Lockout Mode
Keycards Accepted
Feedback
Diagnostics
Audit Memory
Disability Feature
Privacy Ovveride
BMH 801 lock case, 65mm backset, 20 or 24mmm faceplate (applicable only with Kit 3)
Messenger Ready
Outside escutcheon with Messenger connector
Standard inside escutcheon
Messenger Online
Outside escutcheon with Messenger connector
Inside enclosure with Messenger module
Upgradable to BLE with BLE module
End cap with BLE module included, no further upgrades needed
Real time: date and hours/minutes
Using handheld units (dormakaba M-Unit, FDU, HH6) or remotely through Messenger wireless
system to obtain key use history reports from the lock, or using a 4K audit keycard
Keys can be made up to ten days in advance without cancelling current or arriving guests
Configurable expiration dates; can be automatically set for check out date or manually applied
when making key during check-in process
Set by authorized keycard or Messenger system. Can optionally also be configured to perform an
automated/pre-defined passage mode time
Set by authorized keycard or Messenger system
RFID cards or tags. Supports Mifare Classic (Mini, 1K, 4K) and supports Mifare Plus (1K,2K,4K)
and Ultralight C (Guest) credentials
“Dual sensory” audible and light indicators
Light indicators and handheld display
Saflok systems: up to 4000 events
Ilco systems: up to 2000 events
Available for special openings
Emergency keycard
29
Saflok Product Catalog / Order Guide
Confidant RFID (European Mortise Lock Case)
Overview
Certification and Testing
Accessibility Standard
Complies with 2010 ADA Standards for Accessible Design
Industry Standards
Fire resistance 30 minutes per EN 1634-1
DIN 18273 with DIN lever handles (Kit 2-3)
Approved compliant door and lock case must be used
Electronics
Compliant and listed to CE 61000-4, FCC Part 15 and Industry Canada RSS-210. Complies with
CE Radio Equipment Directive 2014/53/EU
-35°C to 70°C
Environmental Operating
0% to 85% non-condensing humidity at 30°C
Conditions
Certified to IP54 for dust and elements on IEC 60529
Warranty
Standard Factory
Warranty
Two years
Support Programs
dormakaba Service Plans available
Confidant RFID Kit 2
Certification and Testing
Industry Standards: Confidant RFID Kit 2 (with 7mm, 8 mm and 9mm spindle) * complies with the classification EN
1906 *Rose Mount (key override) only
Classification EN 1906 for Confidant RFID Kit 2:
With 7mm spindle:
Category of
Use
Durability
Door Mass
Fire
Resistance
Safety
Corrosion
Resistance
Security
Type of
Operation
2
6
-
B
1
4
0/1*
A
With 8mm and 9mm spindle:
Category of
Use
Durability
Door Mass
Fire
Resistance
Safety
Corrosion
Resistance
Security
Type of
Operation
3
7
-
B/D*
1
4
0/1*
A
*Class D: Only for items with stainless steel handle.
Confidant RFID Kit 2
Compatible Lock Cases
A) D
istance between mortise drive and cylinder:
(see figure 1):70mm to 92mm for Euro profile / 74mm to 78mm for Swiss profile
B) Backset: minimum 40 mm
C) Spindle size: 7mm, 8mm, 8.5mm or 9mm square
D) Case length: 135mm to 200mm
E) Distance between drive and top: 30mm to 80.5mm
F) Rotation of spindle hub: less than 60 degrees
Warning: Install only on mortise with
Anti-Panic and an auxiliary
dead latch (Anti-Pick system)
30
Figure 1
Saflok Product Catalog / Order Guide
Confidant RFID Kit 1 (European Mortise Lock Case)
Ordering
60mm
283mm
117.5
mm
23.5
mm
76.1
mm
Front
Front Side
Standard Model Number
C
S
00
0
K
Bluetooth
Lock Model
7
S
Outside housing Options
M
C
N
Installation Options
Build the model number with the required options
Lock Model
Bluetooth
Outside housing Options
Installation Options
Saflok
00
0
R0
1
Stand alone
Messenger
Ready
M1
Messenger US
M2
Messenger
EU/Asia
M3
K
NO BLE
Cylinder Support
BLE Ready
No Cylinder
2
BLE Enabled
D
E
S
Short
L
Long Return
DEMO No BLE
E
DEMO BLE Enabled
D***
DIN Lever
Messenger
Int'nl
MW
Inncom
N0
7
7mm
8
8 mm
9
9 mm
C
M**
M4 & M5
Finish
Outside
Lever
Cylinder
Support
Bluetooth
(Fixed value)
S
Mounting
Screw
Installation Options
Spindle Kit
Outside housing Options
Operating
System
Bluetooth
System
Lock Model
C
(Fixed value)
00
C
Satin Chrome
B
N
No option
Satin Brass
E
Satin Chrome
Exterior
Custom
H
None
(separate
h/*w bag)
U
N
Mounting
Plate
S
Confidant
RFID
C
Satin Brass
Exterior
Satin Chrome
Oceanfront
N
No Lever
Escape Return
Standalone
* For door thicknesses greater than 55mm, please choose appropriate screws and spindle kits from spare parts list page 27. Screws provided for both rose
and back plate mounting. Mounting screw selection applies for rosette mounting. M5 screws always provided for back plate mounting.
**Screws provided for both rose and back plate mounting.
***DIN style lever Confidant RFID Kit 1 is not DIN certified
31
Saflok Product Catalog / Order Guide
Confidant RFID Kit 1 (European Mortise Lock Case)
Spare Parts
*Choosing correct spindle Kit:
Inner side
DOOR
Spindle
Lever & rose
B = Spindle length - A (door thickness)
Conditions:
B = or > C + 5 mm
B<D
32
Saflok Product Catalog / Order Guide
Confidant RFID Kit 1 (European Mortise Lock Case)
Ordering
ITEM NUMBER PART NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
118+513769
118+5133774+3
069+513776+1626
069+513776+1906
069+513776+1828
069x513974+4626
069x513974+4906
069x513974+4828
FCSxxxExNNNN10N-xx*
064-513764-2
012-513751
118-514116
064-516708-102
064-516708-E102
063+514042
118-514318-1
062-514919-1626
062-514919-1606
062-514919-2626
062-514919-2606
062-514919-3626
062-514919-3606
118-514318-2
062-514920-1626
062-514920-1606
062-514920-2626
062-514920-2606
062-514920-3626
062-514920-3606
062+514343+1
062+514343+2
062+514343+3
062+514598+1A
062+514598+1B
062+514598+1C
062+514598+1D
062+514598+1E
062+514598+1F
062+514598+1G
062+514598+2A
062+514598+2B
062+514598+2C
062+514598+2D
062+514598+2E
062+514598+2F
062+514598+2G
062+514598+3A
062+514598+3B
062+514598+3C
062+514598+3D
062+514598+3E
062+514598+3F
062+514598+3G
DESCRIPTION
Battery door kit Confidant RFID
Battery holder kit Confidant RFID
Short lever handle 8 mm w/screw (Satin Chrome)
Short lever handle 8 mm w/screw (Satin Brass)
Short lever handle 8 mm w/screw (Ocean Front Chrome)
Long lever handle 8 mm w/screw (Satin Chrome)
Long lever handle 8 mm w/screw (Satin Brass)
Long lever handle 8 mm w/screw (Ocean Front Chrome)
Front lock housing
Confidant lock transition PCB w/cable short
Lever spring Confidant RFID
Outside hub and spindle kit Confidant RFID
Confidant lock main PCB Saflok Bluetooth compatible (ocean front version) - (also for Older Version -002
PCB replacements)
Confidant lock main PCB Saflok Bluetooth compatible (ocean front version) - (also for Older Version -E002
PCB)
Motor worm kit Confidant RFID
Back plate Confidant RFID key override
Screws & posts key override Confidant RFID - doors 35 to 55 mm (Satin Chrome)
Screws & posts key override Confidant RFID - doors 35 to 55 mm (Satin Brass)
Screws only key override Confidant RFID - doors > 55 to 75 mm (Satin Chrome)
Screws only key override Confidant RFID - doors >55 to 75 mm (Satin Brass)
Screws only key override Confidant RFID - doors >75 to 95 mm (Satin Chrome)
Screws only key override Confidant RFID - doors >75 to 95 mm (Satin Brass)
Back plate Confidant RFID no key override
Screws & posts w/out key override Confidant RFID - doors 35 to 55 mm (Satin Chrome)
Screws & posts w/out key override Confidant RFID - doors 35 to 55 mm (Satin Brass)
Screws only w/out key override Confidant RFID - doors >55 to 75 mm (Satin Chrome)
Screws only w/out key override Confidant RFID - doors >55 to 75 mm (Satin Brass)
Screws only w/out key override Confidant RFID - doors >75 to 95 mm (Satin Chrome)
Screws only w/out key override Confidant RFID - doors >75 to 95 mm (Satin Brass)
Outdoor kit Confidant RFID euro profile cylinder
Outdoor kit Confidant RFID swiss profile cylinder
Outdoor kit Confidant RFID no cylinder
Spindle kit 8mm x 70mm long
Spindle kit 8mm x 84mm long
Spindle kit 8mm x 91mm long
Spindle kit 8mm x 105mm long
Spindle kit 8mm x 111mm long
Spindle kit 8mm x 125mm long
Spindle kit 8mm x 131mm long
Spindle kit 9mm x 70mm long
Spindle kit 9mm x 84mm long
Spindle kit 9mm x 91mm long
Spindle kit 9mm x 105mm long
Spindle kit 9mm x 111mm long
Spindle kit 9mm x 125mm long
Spindle kit 9mm x 131mm long
Spindle kit 7mm x 70mm long
Spindle kit 7mm x 84mm long
Spindle kit 7mm x 91mm long
Spindle kit 7mm x 105mm long
Spindle kit 7mm x 111mm long
Spindle kit 7mm x 125mm long
Spindle kit 7mm x 131mm long
* To configure part, visit www.saflokstore.com or contact customer service: 1.248.837.3700 / 1.800.999.6213 / [email protected]
Screws provided for both rose and back plate mounting. Mounting screw selection applies for rosette mounting. M5 screws always provided for back plate
mounting.
33
Saflok Product Catalog / Order Guide
Confidant RFID Kit 2 (European Mortise Lock Case)
Ordering
37.5mm
60mm
60mm
283mm
283mm
117.5mm
117.5mm
23.5
mm
76.1mm
17mm
69.8mm
Front Side
Front
Back side
Inside
Standard Model Number
C
S
00
Lock Model
K
0
S
7
Outside housing
Options
Bluetooth
4
C
R
N
Installation Options
P
S
Inside housing Options
Build the model number with the required options
00
R0
Messenger
Ready
M1
Messenger
US
0
BLE
Compatible
1
BLE Ready
2
BLE Enabled
D
BLE
M2
Compatible
Messenger Demo
EU/Asia
E
M3
Messenger
Int'nl
MW
BLE Enabled
Demo
Installation Options
Inside housing Options
K
Cylinder
Support
E
No
Cylinder
S
Short
Return
7
4
8
5
7mm
8 mm
L
9
Long
Return
(approved
for EN 179)
9 mm
(Required
for DIN
certified
locks)
D
Austria
8.5 mm
B
DIN Lever
(approved
for EN179)
Inncom
N0
Escape
Return
Standalone
N
No Lever
* Inside cylinder support not available with privacy thumbturn option.
** Backplate mount only available with M5 screws.
*** Rose Mount only available with M4 screws.
34
M4
M5
C
Satin
Chrome
Interior
B
Satin Brass
Interior
E
Satin
Chrome
Exterior
H
Satin Brass
Exterior
U
Satin
Chrome
Ocean-front
***R
Rose Mount
**B
Backplate
mount
Euro profile or
Swiss cylinder
(no privacy)
N
No cylinder
Privacy
Cylinder
Support
*C
Inside Lever
Outside housing
Options
Mounting
Plate
Inside housing Options
Finish
00
Saflok Stand
alone
Installation Options
Mounting
Screw
S
Bluetooth
Outside housing
Options
Spindle Kit
Operating
System
C
System
(Fixed value)
Confidant
RFID
(Fixed value)
Lock Model
Bluetooth
Outside Lever
Lock Model
Cylinder
Support
S
Bluetooth
C
N
No
Thumbturn,
no privacy
P
Privacy
Thumbturn
S
Short Return
L
Long Return
D
DIN Lever
(approved
for EN179)
Requires
9mm spindle
N
No Lever
Saflok Product Catalog / Order Guide
Confidant RFID Kit 2 (European Mortise Lock Case)
Spare Parts
11
25
10
09
08
06
04
03
20
19
18
14
07
17
24
16
01
05
13
02
15
12
22
23
21
35
Saflok Product Catalog / Order Guide
Confidant RFID Kit 2 (European Mortise Lock Case)
Ordering
ITEM NUMBER
1
2
PART NUMBER
DESCRIPTION
063+514042
118-514318-1
Battery door Kit Confidant RFID
Battery holder assy Confidant RFID
Lever handle short 8 mm w/screw (satin chrome)
Lever handle short 8 mm w/screw (satin brass)
Lever handle short 8 mm w/screw (ocean front chrome)
Lever handle long 8 mm w/screw (satin Chrome)
Lever handle long 8 mm w/screw (satin Brass)
Lever handle long 8 mm w/screw (ocean front Chrome)
DIN lever handle 8 mm w/screw & bushing (Stainless steel)
Front lock housing
Confidant RFID lock transition PCB w/cable
Lever spring Confidant RFID
Outside hub and spindle kit Confidant RFID
Confidant lock main PCB Saflok Bluetooth compatible (ocean front version) -(also for older version
-002 PCB replacements)
Confidant lock main PCB Saflok Bluetooth compatible (ocean front version) - (also for older version
-002 PCB replacements)
Motor worm kit Confidant RFID
Back plate Confidant RFID key override cylinder
11
118-514318-2
062-514995-1
Back plate Confidant RFID w/out key override cylinder
M4 Screws & posts Confidant RFID Rose Mount - doors 35 to 55 mm
12
062-514995-2
M4 Screws only Confidant RFID Rose Mount - doors > 55 to 75 mm
062-514995-3
M4 Screws only Confidant RFID Rose Mount - doors >75 to 95 mm
062-514996-1
M5 Screws & posts Confidant RFID Backplate Mount - doors 35 to 55 mm
062-514996-2
M5 Screws only Confidant RFID Backplate Mount - doors > 55 to 75 mm
062-514996-3
M5 Screws only Confidant RFID Backplate Mount - doors >75 to 95 mm
062+514343+1
062+514343+2
062+514343+3
062-514671-1
062-514671-2
062-514671-3
062-514671-4
062-514671-5
062-514671-6
062+514598+4A
062+514598+4B
062-514671-7
062-514671-8
062-514671-9
062-514106
BCSxxxxxxxxx1N-xx*
062-514166-2626
062-514166-2906
062-514166-6626
062-514166-6606
062-514166-1626
062-514166-1906
062-514166-5626
062-514166-5906
062-513975-1626
062-513975-1606
062-513975-3626
062-513975-3606
012-514105
062-513956-1
062-513956-2
062-514696
118-514870-P
118-514870-P-Z-BT-2
Outdoor kit Confidant RFID euro profile cylinder
Outdoor kit Confidant RFID swiss profile cylinder
Outdoor kit Confidant RFID no cylinder
Spindle kit 8 mm x 90 mm - doors 35 to 65 mm
Spindle kit 9 mm x 90 mm - doors 35 to 65 mm
Spindle kit 7 mm x 90 mm - doors 35 to 65 mm
Spindle kit 8 mm x 120 mm - doors >65 to 95 mm
Spindle kit 9 mm x 120 mm - doors >65 to 95 mm
Spindle kit 7 mm x 120 mm - doors >65 to 95 mm
Spindle kit 8.5mm Confidant Door Thk 35mm - 47mm
Spindle kit 8.5mm Confidant Door Thk 43mm - 45mm
Spindle kit 9 mm x 95 mm - doors 35 to 55 mm (DIN locks)
Spindle kit 9 mm x 115 mm - doors >55 to 75 mm (DIN locks)
Spindle kit 9 mm x 135 mm - doors >75 to 95 mm (DIN locks)
Rose mount back plate and screws
Inside trim kit
Trim plate and contour w/cylinder (satin chrome)
Trim plate and contour w/cylinder (satin brass)
Trim plate and contour for Messenger/Bluetooth option w/cylinder (satin chrome)
Trim plate and contour for Messenger/Bluetooth option w/cylinder (satin brass)
Trim plate and contour (satin chrome)
Trim plate and contour (satin brass)
Trim plate and contour for Messenger/Bluetooth option (satin chrome)
Trim plate and contour for Messenger/Bluetooth option (satin brass)
Trim plate and turn knob (satin chrome)
Trim plate and turn knob (satin brass)
Trim plate and turn knob for Messenger/Bluetooth option (satin chrome)
Trim plate and turn knob for Messenger/Bluetooth option (satin brass)
Extension spring
Cylinder trim swiss profile cylinder
Cylinder trim euro profile cylinder
Retainer kit
Antenna cover ass'y confidant
Antenna cover ass'y with Messenger/Bluetooth Confidant
3
4
5
6
7
8
9
10
13
14
15
16
17
18
19
20
21
22
23
24
25
118+513769+U
118+513774+3
069+513776+1626
069+513776+1906
069+513776+1828
069+514974+4626
069+514974+4906
069+514974+4828
062-514994-2630
FCSxxxxxNNxx10N-xx*
064-513764-2
012-513751
118-514116
064-516708-102
064-516708-E102
* To configure part, visit www.saflokstore.com or contact customer service: 1.248.837.3700 / 1.800.999.6213 / [email protected]
36
Saflok Product Catalog / Order Guide
Confidant RFID Kit 3 (European Mortise Lock Case)
Ordering
37.5mm
60mm
60mm
283mm
283mm
117.5mm
117.5mm
23.5
mm
76.1mm
Front
17mm
69.8mm
Front Side
Back side
Inside
Standard Model Number
C
S
00
Lock Model
0
Bluetooth
K
L
9
Outside housing
Options
4
C
R
N
Installation Options
P
L
B
Inside Housing Options
0
R
Mortise Options
Build the model number with the required options
00
Saflok Stand
alone
R0
0
NO BLE
1
BLE Ready
Messenger 2
Ready
BLE
Enabled
M1
Messenger D
US
DEMO
No BLE
M2
Messenger E
EU/Asia
DEMO BLE
Enabled
M3
Messenger H
Int'nl
BLE Hilton
(only for
MW
Hilton
Inncom
properties)
N0
Escape
Return
Standalone
K
S
Cylinder Short
Support Return(Not
approved
E
for EN 179)
No
Cylinder
9
9 mm
4
M4
5
M5
L
Long
Return
(Approved
for EN 179)
D
DIN Lever
(Approved for
EN 179)
***R
B
**B
Satin Brass
E
Satin
Chrome
Exterior
H
Satin Brass
Exterior
U
Satin
Chrome
Oceanfront
Rose
Mount
Backplate
mount
N
N
S
privacy)
with kickoff
L
No cylinder No
Short
Thumbturn, Return
*C
no Privacy
(Not
Euro
approved
profile
P
for EN
or Swiss
Privacy
cylinder (no Thumbturn 179)
Long
Return
(Approved
for EN 179)
D
DIN Lever
(Approved
for EN 179)
0
Handing
Model
B
Deadbolt
Functionality
Mortise Options
Inside Lever
Cylinder
Support
Finish
C
Satin
Chrome
Mortise Options
Inside Housing
Options
Privacy
Installation Options
Inside Housing Options
Mounting
Plate
housing
Bluetooth Outside
Options
Mounting
Screw
Operating
System
Installation Options
Spindle Kit
System
00
(Fixed value)
S
(Fixed value)
Confidant
RFID
Lock Model
C
Outside housing
Options
Bluetooth
Outside Lever
Lock Model
0
Cylinder
Support
S
Bluetooth
C
R
BMH 801 Standard RH or
lock case Dead Bolt LHR
20mm
L
face
LH or
plate
RHR
(approved
for EN 179)
C
BMH 801
lock case
24mm
face
plate
(approved
for EN 179)
N
No Lever
N
No Lever
* Inside cylinder support not available with privacy thumbturn option.
** Backplate mount only available with M5 screws.
*** Rose Mount only available with M4 screws.
37
Saflok Product Catalog / Order Guide
Confidant RFID Kit 3 (European Mortise Lock Case)
Spare Parts
11
26
(Approved
for EN 179)
10
09
08
06
04
20
19
03
18
14
17
24
16
07
01
05
13
25
02
15
12
22
21
38
23
Saflok Product Catalog / Order Guide
Confidant RFID Kit 3 (European Mortise Lock Case)
Spare Parts
ITEM
NUMBER
PART NUMBER
DESCRIPTION
1
118+513769
Battery door Kit Confidant RFID
2
118+513774+3
Battery holder assy Confidant RFID
069+513776+1626
Lever handle 8 mm w/screw (satin
chrome)
069+513776+1906
Lever handle 8 mm w/screw (satin
brass)
069+513776+1828
ITEM
NUMBER
PART NUMBER
DESCRIPTION
062-514671-2
Spindle kit 9 mm x 90 mm - doors 35
to 65 mm
062-514671-5
Spindle kit 9 mm x 120 mm - doors
>65 to 95 mm
062-514671-7
Spindle kit 9 mm x 95 mm - doors 35 55 mm (DIN locks)
Lever handle 8 mm w/screw (ocean
front chrome)
062-514671-8
Spindle kit 9 mm x 115 mm - doors
>55 - 75 mm (DIN locks)
069+513974+4626
Long lever handle 8 mm w/screw
(Satin Chrome)
062-514671-9
Spindle kit 9 mm x 135 mm - doors
>75 - 95 mm (DIN locks)
069+513974+4906
Long lever handle 8 mm w/screw
(Satin Brass)
069+513974+4828
Long lever handle 8 mm w/screw
(Ocean Front Chrome)
062+514994+630
DIN lever handle 8 mm w/screw &
bushing (Stainless steel)
FCS00xExNNxx10Nxx*
Front lock housing
5
064-513764-2
Confidant RFID lock transition PCB
w/cable
6
012-513751
Lever spring Confidant RFID
7
118-514116
064-513708-102
3
4
8
062-514106
Rose mount back plate and screws
BCN00xExNxxx1Nxx*
Inside trim kit w/out privacy
BCN00xExPxxx1Nxx*
Inside trim kit with privacy and kick
off
062-514166-2626
Trim plate and contour w/cylinder
(satin chrome)
062-514166-2906
Trim plate and contour w/cylinder
(satin brass)
062-514166-6626
Trim plate and contour w/cylinder
(satin chrome, Mssgr/BLE version)
Outside hub and spindle kit Confidant RFID
062-514166-6906
Trim plate and contour w/cylinder
(satin chrome, Mssgr/BLE version)
Confidant lock main PCB Saflok
Bluetooth compatible (ocean front)
- (also for older version -002 PCB
replacements)
062-514166-1626
Trim plate and contour (satin
chrome)
062-514166-1906
Trim plate and contour (satin brass)
062-514166-5626
Trim plate and contour (satin chrome,
Mssgr/BLE version)
062-514166-5906
Trim plate and contour (satin chrome,
Mssgr/BLE version)
062-513975-1626
Trim plate and turn knob (satin
chrome)
062-513975-1906
Trim plate and turn knob (satin brass)
062-513975-3626
Trim plate and turn knob (satin
chrome, Mssgr/BLE version)
062-513975-3906
Trim plate and turn knob (satin
chrome, Mssgr/BLE version)
064-513708E102
Confidant lock main PCB Saflok
Bluetooth compatible (Ocean Front)
- (also for older version E002 PCB
replacements)
9
063+514042
Motor worm kit Confidant RFID
10
118-514318-1
Back plate Confidant RFID key override cylinder
11
12
13
14
15
118-514318-2
Back plate Confidant RFID w/out key
override cylinder
062-514995-1
M4 Screws & posts Confidant RFID
Rose Mount - doors 35 to 55 mm
062-514995-2
M4 Screws only Confidant RFID Rose
Mount - doors > 55 to 75 mm
062-514995-3
M4 Screws only Confidant RFID Rose
Mount - doors >75 to 95 mm
062-514996-1
M5 Screws & posts Confidant RFID
Backplate Mount - doors 35 to 55 mm
062-514996-2
M5 Screws only Confidant RFID
Backplate Mount - doors > 55 to 75
mm
062-514996-3
M5 Screws only Confidant RFID
Backplate Mount - doors >75 to 95
mm
062+514343+1
Outdoor kit Confidant RFID euro
profile cylinder
062+514343+2
Outdoor kit Confidant RFID swiss
profile cylinder
062+514343+3
Outdoor kit Confidant RFID no
cylinder
16
17
18
19
20
21
012-514105
Extension spring
22
062-513956-1
Cylinder trim swiss profile cylinder
23
062-513956-2
Cylinder trim euro profile cylinder
24
062-514696
Retainer kit
062-515016-L630
BMH 801 lock case, 65mm backset,
20mm faceplate, LH
032-515016-R630
BMH 801 lock case, 65mm backset,
20mm faceplate, RH
032-515071-L630
BMH 801 lock case, 65mm backset,
24mm faceplate, LH
032-515071-R630
BMH 801 lock case, 65mm backset,
24mm faceplate, RH
118-514870-P
Antenna cover ass'y Confidant
118-514870-P-Z-BT-2
Antenna cover ass'y with
Messenger/bluetooth Confidant
25
26
* To configure part, visit www.saflokstore.com or contact customer service: 1.248.837.3700 / 1.800.999.6213 / [email protected]
39
Saflok Product Catalog / Order Guide
Confidant RFID (ANSI Mortise Lock Case)
Lock Overview
The Confidant RFID asserts a softer, more engaging look to reflect true hospitality. Together with graceful lines and
clean aesthetics, its RFID technology enhances the guest experience while extending the service life of the lock. This ultramodern lock conveniently functions with dormakaba access management software and stand-alone devices.
Mobile Access
This Bluetooth Low Energy (BLE) capable lock can operate using the dormakaba
Mobile Access Solutions.
Applications
• Available with mortise or tubular latch applications
• Suitable for small to very large scale hotels
• Easily replaces existing mechanical or electronic door locks
• Works with third party mortise lock case and door hardware
• Access control for guest rooms, common areas, and back-of-house
Security Features
• Vandalism and attack resistant
• Improved tamper resistance; tamper alarm is reset by emergency key or dormakaba
handheld programming device
• Emergency access: emergency keycard and electronic override
Low Maintenance
• Operates with a completely sealed contactless reader
• Batteries last up to 50,000 openings or up to 3 years
• Low battery indicator alerts staff
• Audit trail is retained during battery replacement and lock programming
• Wear resistant construction and finish
Access Management Software
The Confidant RFID lock is supported by dormakaba’s robust access management software solution that features
an array of access control workflows for both guest and staff access. Optionally, choose dormakaba’s online access
management solution for superior control and monitoring.
40
Saflok Product Catalog / Order Guide
Confidant RFID (ANSI Mortise Lock Case)
Lock Overview
Mechanical Features
Outside Housing: Zinc cast alloy construction with steel mounting plate/Field reversible levers. Ergonomic RFID
reader with target to guide user/ LEDs for visual feedback. Panel that conceals lock batteries
(3 alkaline AA type) and programming interface. Spindle socket
Inside Housing: Stainless steel trim with a steel mounting plate construction / Field reversible levers (only short
return levers) Privacy turn knob (optional)
Levers:
Available in short or long return designs. Outside lever free to rotate upward and downward in
locked mode
Standard Finishes:
Satin chrome or satin brass
Batteries:
3 AA batteries for up to 50,000 openings or up to 3 years (based on 10 openings per day).
Low battery indicator: alerts staff that batteries need to be changed soon
Deadbolt:
1" (25 mm) (for ASM mortise), projected by inside thumbturn and retracted with the latch by the
interior handle, emergency override or specific staff keycards. Optional auto deadbolt available
Door Thickness:
From 1 ” to 2 ½” (35mm to 66mm)
Standard Backset:
2 ¾” (70mm) mortise and tubular latch. 2 ” (60mm) tubular latch only
Locking Options:
ANSI lock case with 1 ¼” or 1” lock front mortise. Optional automatic deadbolt.
Online Configurations:
Messenger Ready Outside escutcheon with Messenger connector
DAJ mortise (ANSI lock case) Standard inside escutcheon
Messenger Online - Outside escutcheon with Messenger connector
DAJ mortise (ANSI lock case) Inside enclosure with Messenger module.
Mobile Access Options
BLE ready:
BLE enabled:
Upgradable to BLE by adding BLE module
End cap with BLE module included, no further upgrades needed
Lock Operation
Date/Time Stamp
Real time: date and hours/minutes
Programming & Audit
Trail Downloading
Using handheld units (dormakaba M-Unit, FDU, HH6) or remotely through Messenger wireless
system to obtain key use history reports from the lock, or using a 4K audit keycard
Preregistered
Keycards
Keys can be made up to ten days in advance without cancelling current or arriving guests
Keycard Expiry
Configurable expiration dates; can be automatically set for check out date or manually applied
when making key during check in process
Passage Mode
Set by authorized keycard or Messenger system. Can optionally be configured to perform an
automated/pre-defined passage mode time
Lockout Mode
Set by authorized keycard or Messenger system
Keycards Accepted
RFID cards or tags (ISO14443A with Mifare Classic) available in Mini, 1K and 4K memory sizes
(4 byte NUID type)
Feedback
“Dual sensory” audible and light indicators
Diagnostics
Light indicators and handheld display
Audit Memory
Saflok systems: up to 4000 events ILCO systems: up to 2000 events
Disability Feature
Available for special openings
Privacy Ovveride
Emergency keycards
41
Saflok Product Catalog / Order Guide
Confidant RFID (ANSI Mortise Lock Case)
Lock Overview
Certifications and Testing
Accessibility Standard
ADA (Americans with Disability Act) compliant levers
Fire Rating
Meets UL 10C and ULC S-104, on fire door rated up to and including 3 hours with dormakaba
ANSI lock case (ASM mortise) and 20 minutes with dormakaba tubular latch.
Electronics
Compliant IEC 61000-4, FCC Part 15 and Industry Canada RSS-210. CE R&TTE Directive 1999/
EC.
Environmental
Operating Conditions
-31°F to 151°F (-35ºC to 66°C)
0% to 85% non-condensing humidity at 86°F (30°C)
Warranty
Standard Factory
Warranty
Two years
Support Programs
dormakaba Service Plans
42
Saflok Product Catalog / Order Guide
Confidant RFID (ANSI Mortise Lock Case)
Ordering
23⁄8”
23⁄8”
1”
111⁄8”
8”
111⁄8”
45⁄8”
57⁄8”
45⁄8”
41⁄8”
15⁄16”
3”
Front
1”or 11⁄4”
11⁄16”
23⁄4”
Back side
Front Side
Inside
Mortise (ASM)
Standard Model Number - ASM / ESM (Example)
C
S 00
Lock Model
0
E
L
A
housing
Bluetooth Outside
Options
A
C
B
Installation Options
N
P
S
1
Inside Housing Options
0
R
Mortise Options
Build the model number with the required options
R0
Messenger
Ready
M1
Messenger
US
M2
Messenger
EU/Asia
M3
No BLE
1
BLE
Ready
2
BLE
Enabled
D
DEMO
No BLE
E
DEMO
Messenger BLE
Int'nl
Enabled
MW
Inncom
N0
Escape
Return
Standalone
H
BLE Hilton
(only for
Hilton
properties)
E
S
No
Short
Cylinder Return
L
Long
Return
(California
compatible)
N
Mortise Options
C
#12-24 Satin
Chrome
B
Satin
Brass
E
Satin
Chrome
Exterior
H
Satin
Brass
Exterior
U
Satin
Chrome
Oceanfront
B
Backplate
mount
N
N
No
No
Cylinder Thumbturn
No Privacy
S
1
C
3
Short
California
(Non
P
reversible
Privacy
Thumbturn No F
with kickoff mortise
option)
ASM 11/4”
ASM 1”
Handing
Model
Privacy
A
Deadbolt
Functionality
Inside Housing Options
Inside lever
Installation Options
Cylinder
Support
Mortise Options
Mounting
Plate
Inside Housing Options
A
7.14
mm
B
Installation Options
Mounting
Screw
0
A
Spindle Kit
00
Saflok Stand
alone
Outside housing
Options
Outside
Lever
Bluetooth
Operating
System
System
S
(Fixed value)
Confidant RFID
(Fixed value)
Lock Model
C
A
housing
Bluetooth Outside
Options
Cylinder
Support
Lock Model
E
Finish
S 00
Bluetooth
C
0
L
1
R
LH & RHR w/ S
Std. DB
(Requires inside lever LH w/
California inside lever
Privacy)
ADB
(not
available
with
ESM)
2
No
Deadbolt
RH & LHR w/ S
inside lever RH w/
California inside lever
X
LHR w/ California
inside lever
Y
RHR w/ California
inside lever
F
Dual handed (RH
mortise, 2 strikes)
Reversible (not with
California inside
lever)
43
Saflok Product Catalog / Order Guide
Confidant RFID (Tubular Latch)
Ordering
23⁄8”
23⁄8”
111⁄8”
23⁄4”
1⁄2”
111⁄8”
45⁄8”
45⁄8”
15⁄16”
3”
Front
21⁄4”
11⁄16”
23⁄4”
Front Side
11⁄8”
Back side
Inside
Tubular Latch
Standard Model Number - Tubular Latch (Example)
C
S
00
0
E
S
8
Bluetooth Outside housing
Options
Lock Model
A
C
B
Installation Options
N
P
S
6
N
F
Mortise Options
Inside Housing Options
Build the model number with the required options
E
A
B
N
N
00
0
R0
1
Saflok Stand alone
Messenger
Ready
M1
Messenger
US
M2
Messenger
EU/Asia
M3
Messenger
Int'nl
MW
Inncom
N0
No BLE
BLE
Ready
2
BLE
Enabled
D
DEMO
No BLE
E
DEMO
BLE
Enabled
H
BLE Hilton
(only for
Escape
Hilton
Return
Standalone properties)
E
S
No
Short
Cylinder Return
L
Long
Return
(California
compatible)
8
8 mm
A
C
#12-24 Satin
Chrome
B
Satin
Brass
E
Satin
Chrome
Exterior
H
Satin
Brass
Exterior
U
Satin
Chrome
Oceanfront
B
Backplate
mount
N
No
Cylinder
Privacy
Finish
Spindle Kit
Cylinder
Support
Bluetooth
(Fixed value)
(Fixed value)
S
N
No
Thumbturn
No Privacy
P
Privacy
Thumbturn
with kickoff
Mortise Options
Mortise Options
Inside lever
Inside Housing Options
Cylinder
Support
Installation Options
Mounting
Plate
Bluetooth Outside housing
Options
Mounting
Screw
Lock Model
Outside Lever
Inside Housing Options
Operating
System
Installation Options
System
housing
Bluetooth Outside
Options
Confidant
RFID
Lock Model
C
44
8
C
California
(non
reversible.
Handing
provided
with mortise
options no F)
S
Short
Return
6
Tubular
2 3/4” backset
t-strike
7
Tubular
2 3/8” backckset
t-strike
N
None
Handing
00
Deadbolt
Functionality
S
Model
C
L
LH
R
RH
F
Reversible
(not with
California inside
lever)
Saflok Product Catalog / Order Guide
Confidant RFID (Tubular Latch)
Spare Parts
24
23
18
17
13
12
19
10
16
09
15
08
04
06
14
23
03
22
21
07
20
01
05
11
02
45
Saflok Product Catalog / Order Guide
Confidant RFID (Tubular Latch)
Spare Parts
ITEM
PART NUMBER
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
DESCRIPTION
118+513769+u
Battery door Kit Confidant
RFID
118+513774+2
ITEM
PART NUMBER
NUMBER
DESCRIPTION
BCSxxxANxxxx1NUxx*
Inside trim assembly
Battery holder Kit Confidant
RFID
062-514166-1U626
Trim plate and contour sub
(satin chrome)
069+513776+1626
Lever handle short 8 mm w/
screw (satin chrome)
062-514166-1U906
Trim plate and contour sub
(satin brass)
069+513776+1906
Lever handle short 8 mm w/
screw (satin brass)
062-514166-5U626
069+513776+1828
Lever handle short 8 mm w/
screw (ocean front chrome)
Trim plate and contour for
Messenger/Bluetooth option
(satin chrome)
062-514166-5U906
069+514974+4626
Lever handle long 8 mm w/
screw (satin chrome)
Trim plate and contour for
Messenger/Bluetooth option
(satin brass)
069+514974+4906
Lever handle long 8 mm w/
screw (satin brass)
062-513975-1U626
Trim plate and turn knob
(satin chrome)
069+514974+4828
Lever handle long 8 mm w/
screw (ocean front chrome)
062-513975-1U906
Trim plate and turn knob
(satin brass)
FCSxxxAENNxx10NUxx*
Front lock housing assembly
062-513975-3U626
064-513764
Confidant RFID lock transition PCB w/cable
Trim plate and turn knob for
Messenger/Bluetooth option
(satin chrome)
062-513975-3U606
012-513751
Lever spring Confidant RFID
Trim plate and turn knob for
Messenger/Bluetooth option
(satin brass)
118-514116
Outside hub and spindle Kit
Confidant RFID
062-514696
Retainer kit
025-514557
Turn knob stopper ADB Mortise
025-514694
Turn knob stopper ASM Mortise
012-514105
Extension spring
064-513708-002
Confidant RFID lock main
PCB Saflok
064-513708E002
Confidant RFID lock main
PCB Saflok (ocean front
version)
064-516708-102
Confidant lock main PCB
Saflok Bluetooth compatible
064-516708-E102
Confidant lock main PCB
Saflok Bluetooth compatible
(ocean front version)
063+514042
Motor worm Kit Confidant
RFID
118-514318-3
Back plate Confidant RFID
062-514917-1626
Screws Confidant RFIDdoors 1 3/8" to 2 1/2"
062-514917-2626
Screws Confidant RFIDdoors > 2 1/2" to 3 5/8"
033-513935
Gasket outside housing
Confidant RFID
062-514673-1
Spindle Kit 9/32" x 3 9/16" doors 1 3/8" to 2 1/2"
062-514673-2
Spindle Kit 9/32" x 4 3/4" doors > 2 1/2" to 3 5/8"
14
15
16
17
18
19
20
M76-xxx1-xxx*
ASM mortise
21
50413x-6xx-K*
Standard 4 7/8" (124 mm)
7x-A0580SC
Tubular latch kit 2 3/4” Backset
7x-A0570SC
Tubular latch kit 2 3/8” Backset
062-514814
Spacer Kit
1118-514870-U
Antenna cover ass'y Confidant
118-514870-U-xxxx-x
Antenna cover ass'y with Messenger/Bluetooth Confidant
22
23
24
* To configure part, visit www.Saflokstore.com or contact customer service: 1.248.837.3700 / 1.800.999.6213./ [email protected]
46
Saflok Product Catalog / Order Guide
Saflok RTTM RFID
Lock Overview
The Saflok RT is a rugged full-body electronic lock that offers RFID
technology to enhance guest convenience and improve operational efficiency.
This durable lock is easy to use and works with Saflok access management
software.
Mobile Access
This Bluetooth Low Energy (BLE) capable lock can operate using the
dormakaba Mobile Access Solutions.
Applications
• Suitable for small to very large scale hotels
• Easily replaces existing mechanical or electronic door locks throughout a
facility
• Access control for guest rooms, common areas as well as back-of-house
Security Features
• High security and tamper-proof design
• 1” solid deadbolt (optional auto deadbolt)
• Staff monitoring - Keycard audits (RFID and smartcard)
• Emergency access: Emergency keycard, mechanical key
Low Maintenance
• Operates with a completely sealed contactless reader (RFID only)
• Batteries last up to 2 years
• Low battery indicator alerts staff
• Lock programming and audit are not erased during battery replacement
• Wear resistant construction and finish
Access Management Software
The RT lock is supported by dormakaba’s robust access management software solution that features an array of access
control workflows for both guest and staff access. Optionally, choose dormakaba’s online access management solution
for superior control and monitoring.
47
Saflok Product Catalog / Order Guide
Saflok RT RFID
Lock Overview
Mechanical Features
Description
Heavy duty electronic lockset (mortise or cylindrical) with clutch mechanism and built-incontactless
RFID reader
Handing
Left or Right factory handed mortise, field reversible handing (lever and mortise)
Lever
ADA compliant, outside lever free to rotate upward and downward in locked mode
Lever clearance (space from end of lever to door)
Long Lever
3/8“ (9.5mm)
Short Lever
2“ (51mm)
Elevon
Long
Gala
Elevon & Gala Levers
2 9/32“ (58mm)
Short
Concealed Key
Override (optional)
- Saflok KIK Core (keyed-alike, master keyed, recodable)
- Best Small IC Adaptor
Deadbolt
1" (25 mm) (for ASM mortise) or 2 1.4 mm (for ESM Mortise) solid metal, projected by inside thumbturn
and retracted with the latch by the interior handle, emergency override or specific staff keycards.
Optional auto deadbolt available
Door Thickness
Shipping Weight
From 1 ⅜" to 2 ½" (35mm to 66mm)
8.5 lbs (3.8 kg)
Housing
Construction
Cast zinc alloy (outside housing levers and thumbturn), stainless steel inside housing
Standard Finishes
Standard Backset
Satin chrome, satin brass and supreme finish for ocean front applications
2 3/4” (70mm) backset, 2 3/8” (60mm) backset also available for cylindrical lock
Locking Options
ANSI lock case with 1 ¼" or 1" lock front mortise
Optional automatic deadbolt
European lock case mortise (20 x 165 mm) with round (20 or 23 x 235 mm) or square (20 x 235 mm)
lock front mortise
Online
Configurations
Messenger Ready
Messenger Online
DAJ mortise (ANSI lock case)
Standard (stand alone) inside escutcheon
Lock controller board with Messenger capability
DAJ mortise (ANSI lock case)
Inside escutcheon equipped with Messenger module
Mobile Access Options
BLE ready
Upgradable to BLE with BLE module
BLE enabled
End cap with BLE module included, no further upgrades needed
Batteries
Alkaline - Three AA
battery pack
48
Battery life is up to 3 years
Low battery indicator: alerts staff that batteries need to be changed soon
Saflok Product Catalog / Order Guide
Saflok RT RFID
Lock Overview
Lock Operation
Date/time stamp
Real time; date and hours/minutes
Interrogation
Obtain key usage reports from the lock by using a handheld unit at the door, or increase
efficiency by performing a remote Interrogation using Messenger (optional)
Pre-registered
keycards
Keys can be made up to ten days in advance without cancelling current or arriving guests
Keycard Expiration
Passage mode
Configurable expiration dates; can be automatically set for check out date or manually applied
when making key during check in process
Set by authorized keycard or Messenger system. Can also be configured to perform an
automated/pre-defined passage mode time.
Lockout mode
Set by authorized keycard or Messenger system
Keycards accepted
MIFARE Classic keycards (4 byte NUID)
Feedback
Light indicators in reader
Diagnostics
Light indicators and handheld display
Audit Trail
Up to 4,000 events
Privacy override
Emergency keycards
Disability Feature
RCU readers interface with automatic power operated doors for special openings
Certifications and Testing
Accessibility
standard
Complies with ADA standards 2010 for accessible design
BHMA/ANSI
Certified to be compliant with Grade One performance tests for “ANSI/BHMA A156.13 Standard
for Mortise Locks and Latches,” and “ANSI/BHMA A156.25 Standard for Electrified Locking
Devices.” (Only locks tested and approved by non-biased third-party test lab are allowed in the
“BHMA Certified Products Directory” found at www.buildershardware.com)
Fire Rating
Listed for pre-prepared manufactured doors and certified for retrofitting on existing doors by
Underwriters Laboratories for use on fire doors having up to a three-hour rating. U.L.
Certification: “Accessories for Single-point Locks and Latches and Fire Exit Hardware.”
Evaluated in accordance with UL 10B and UL 10C. U.L. Listing: “Electrically Controlled
Singlepoint Locks and Latches.”
Electronics
FCC Part 15 Class A and Complies with CE Radio Equipment Directive 2014/53/EU
Environmental
operating
conditions
-31°F to 151°F (-35°C to 66°C) 0% to 85% non-condensing humidity at 86°F (30°C) conditions
Florida Building
Code
Approved in the exterior door category (exterior door components). Code of approval is FL13061
Warranty
Standard Factory
Warranty
2 years
Support Programs
dormakaba Service Plans (Platinum, Gold, Silver)
49
Saflok Product Catalog / Order Guide
Saflok RT RFID
Lock Overview
Special Order Instructions
Model
Number
Description
Notes
79N
Escape Return
Required for Norway. Inside housing equipped with lever switch. Lock is
programmed with a specific relock time (after entrance and egress) based
on property. To lock door immediately valid card pressed to reader Messenger
and Messenger not available
79SE
Openways Ready
Front lock housing with connector for Openways module.
Attachment plate for Openways module provided (stainless steel)
Openways module shipped separately.
79V
Special Messenger
Ready
Inside housing provided with plastic housing for Messenger Module
Messenger Module shipped separately.
79S5
Shabbat Lock
Switches removed from privacy and key override.
Order master keyed cylinders separately.
Add "-I" to end of item number if customer wants Privacy.
79S3
Dummy Trim
No lock mechanics or electronics
Not available with K-levers
Enter "00" for no locking mechanism (inside and outside trims only)
Functionality and Configurations
Guestroom
(F15)
Utility
(F21 or F07)
Panic Bar
Trim
50
Mortise (ANSI or Slim)
Standalone
with Deadbolt (standard Messenger
or automatic). Privacy
ready
activated by thumbturn.
No upgrade path to Online
Outside escutcheon equipped with connector for Messenger
communications board. Order DAJ mortise (where
available). To upgrade to online, inside escutcheon is
swapped for one with Messenger Communications board.
Online
Outside escutcheon equipped with connector for Messenger
communications board. Order DAJ mortise (where
available). Inside escutcheon is equipped with Messenger
communications board.
Mortise (ANSI or Slim)
without Deadbolt
or cylindrical latch.
Privacy (activated by
thumbturn) can be
deactivated for closet
and common areas.
Standalone
No upgrade path to Online
Messenger
ready
Outside escutcheon equipped with connector for Messenger
communications board. Order DAJ mortise (where
available). To upgrade to online, inside escutcheon is
swapped for one with Messenger Communications board.
Online
Outside escutcheon equipped with connector for Messenger
communications board. Order DAJ mortise (where
available). Inside escutcheon is equipped with Messenger
communications board.
Outside escutcheon
equipped with adaptor
plate for connection to
panic bar. Rim panic bar
can be provided in a kit.
Standalone
No upgrade path to Online
Messenger
ready
Outside escutcheon equipped with connector for Messenger
communications board. To upgrade to online, Messenger
Communications board in housing must be connected and
attached to door above panic bar.
Online
Outside escutcheon equipped with connector for
Messenger communications board (included). Messenger
Communications board in housing must be connected and
attached to door above panic bar.
Saflok Product Catalog / Order Guide
Saflok RT RFID
Ordering RT Series (American Steel Mortise-ASM Lock 1 1/4" Mortise)
1⁄2”
(12.7 mm)
11⁄2”
(38.1 mm)
1”
(25 mm)
8”
(203 mm)
93⁄8”
(238.1 mm)
35⁄16”
(84.1 mm)
27⁄8”
(73 mm)
Front
Side
31⁄4”
(82.6 mm)
Back Side
47⁄8”
(124 mm)
41⁄8”
(105 mm)
11⁄4”
(32 mm)
21⁄4”
(58.7 mm)
Back
57⁄8”
(149 mm)
11⁄4”
(32 mm)
ASM Mortise
Strike
Standard Model (Example)
7
9
S
0
1
Model
0
Locking Device
1
1
E
L
3
0
Application
Lever Type
Override
Handing
Version
Bluetooth
6
Finish
2
6
Build the model number with the desired options
7
9
3
Model
Model
Locking Device
Application
Lever Type
Override
Handing
Version
Bluetooth
Finish
Locking Device
Application
Lever Type
Override
Handing
Version
Bluetooth
Finishes
23⁄4“ (70 mm) Backset
Guestroom
79S0
Standalone
79Z0
Messenger Online
79Y0
Europe, Asia
79Q0
International
79N0
Escape Return
790WO
Inncom RF
79S4/79Z4/79Y4
79Q4/79N4
10
ASM, with 11⁄4“ (32 mm) face
plate, field reversible handing
16
Auto Deadbolt
ASM with 11⁄4“ (32 mm) face
plate, field reversible handing
60
ASM DAJ with 11⁄4" (32 mm)
face palte, field reversible
handing
66
Auto Deadbolt ASM DAJ with
11⁄4" (32 mm) face plate, field
reversible handing
Demo Lock
12
Standalone
79R1
Messenger Ready
79Z1
Messenger Online
79Y1
Europe, Asia
79Q1
International
2
Exterior
locks
supplied
with gasket
for outside
escutcheon
1
Long/Long
Front
Back
2
Short/Short***
Front
Back
E
Elevon Lever
Front
Back
G
E
Electronic
K
Mechanical key
cylindrical Lori
universal (1539)
key-in-knob
OR
Mechanical
recodable key
cylinder
Must specify
on lock order
which type of
key cylinder is
required
L
Left or
Right
reverse (Y)
3
0
Contactless No BLE
Reader
1
R
Right or
Left reverse
(X)
F***
Dual
Handed
(L & R),
Left Hand
Reverse,
Right Hand
Reverse
(X & Y)
BLE Ready
2
BLE Enabled
H
626
Satin Chrome
606
Satin Brass
U26
Ultra Satin Chrome
BLE Hilton
(only for Hilton
properties)
Front
Back
Inncom RF demo
79S1
Interior
Gala Lever
790W4
Utility
1
ASM, with 11⁄4“ (32 mm)
face plate, field reversible
handing
62
ASM, DAJ, no deadbolt
with 1-1⁄4" (32 mm) face
plate, field reversible handing. Thumbturn is on inside
escutcheon for privacy but can
be disabled
8
Long/Long
Inside at 45°
Front
Back
H
Short/Short***
Inside at 45°
Front
Back
790W1
Inncom RF
Note: * For doors greater than 21/2" (63 mm) order a thick door kit in Lock Accessories Miscellaneous section.
** Use short return levers when moldings are within 41/2" (11cm) and 8” (20.32cm) from the edge of the door
*** Locks are assembled “Right-Hand” and may be field reversed for Left-Hand doors.
51
Saflok Product Catalog / Order Guide
Saflok RT RFID
Ordering RT Series (American Steel Mortise-ASM Lock 1" Mortise)
1⁄2”
(12.7 mm)
11⁄2”
(38.1 mm)
1”
(25 mm)
8”
(203 mm)
93⁄8”
(238.1 mm)
35⁄16”
(84.1 mm)
27⁄8”
(73 mm)
Front
Side
31⁄4”
(82.6 mm)
Back Side
47⁄8”
(124 mm)
41⁄8”
(105 mm)
1”
(25 mm)
21⁄4”
(58.7 mm)
Back
57⁄8”
(149 mm)
11⁄4”
(32 mm)
ASM Mortise
Strike
Standard Model (Example)
7
9
S
0
1
Model
1
Locking Device
1
1
E
L
3
0
Application
Lever Type
Override
Handing
Version
Bluetooth
6
Finish
2
6
Build the model number with the desired options
7
9
3
Model
Model
Guestroom
79S0
Standalone
79R0
Messenger Online
Ready
79Z0
Messenger Online
79Y0
Europe, Asia
79Q0
International
79N0
Escape Return
790W0
Inncom RF
79S1
Standalone
79R1
Messenger Ready
79Z1
Messenger Online
79Y1
Europe, Asia
79Q1
International
790W1
Note: 52
Application
Lever Type
Override
Handing
Version
Bluetooth
Finish
Locking Device
Application
Lever Type
Override
Handing
Version
Bluetooth
Finishes
23⁄4“ (70 mm) Backset
11
ASM, with 1" (25 mm)
face plate, NOT field
reversible
17
Auto Deadbolt
ASM with 1" (25 mm)
face plate, NOT field
reversible
61
ASM DAJ with 1" (25
mm) face palte, NOT field
reversible handing
67
Auto Deadbolt ASM DAJ with
1" (25 mm) face plate, field
reversible handing
13
Utility
Inncom RF
Locking Device
ASM, no deadbolt with 1" (25
mm) face plate, NOT field
reversible handing. Thumbturn
is on inside escutcheon for
privacy but can be disabled
63
ASM, DAJ, no deadbolt
with 1" (25 mm) face plate,
NOT field reversible handing.
Thumbturn is on inside
escutcheon for privacy but can
be disabled
1
Interior
2
Exterior
locks
supplied
with gasket
for outside
escutcheon
1
Long/Long
Front
Back
2
Short/Short***
Front
Back
E
Elevon Lever
Front
Back
G
Gala Lever
E
Electronic
K
Mechanical key
cylindrical Lori
universal (1539)
key-in-knob
OR
Mechanical
recodable key
cylinder
Must specify
on lock order
which type of
key cylinder is
required
L
Left or
Right
reverse (Y)
R
Right or
Left reverse
(X)
F***
Dual
Handed
(L & R),
Left Hand
Reverse,
Right Hand
Reverse
(X & Y)
3
0
Contactless No BLE
Reader
1
BLE Ready
2
BLE Enabled
H
BLE Hilton
(only for Hilton
properties)
Front
Back
8
Long/Long
Inside at 45°
Front
Back
H
Short/Short***
Inside at 45°
Front
Back
* For doors greater than 2-1/2" (63 mm) order a thick door kit in Lock Accessories Miscellaneous section.
** Use short return levers when moldings are within 4-1/2" (11cm) and 8” (20.32cm) from the edge of the door
*** Locks are assembled “Right-Hand” and may be field reversed for Left-Hand doors.
Messenger locks should be configured with DAJ mortise. Some listed lever options are not available in all finishes
626
Satin Chrome
606
Satin Brass
U26
Ultra Satin Chrome
Saflok Product Catalog / Order Guide
Saflok RT RFID
Ordering RT Series (Slim Mortise-ESM Lock)
1⁄2”
(12.7 mm)
11⁄2”
(38.1 mm)
27⁄32”
(21.4 mm)
91⁄4”
(235 mm)
93⁄8”
(238.1 mm)
35⁄16”
(84.1 mm)
27⁄8”
(73 mm)
Front
Side
31⁄4”
(82.6 mm)
21⁄4”
(58.7 mm)
Back
13⁄16”
(20 mm)
Back Side
71⁄4”
(180 mm)
91⁄4”
(235 mm)
61⁄2”
(165 mm)
41⁄16”
(103 mm)
13⁄16”
(20 mm)
or
15⁄16”
(23 mm)
29⁄32”
(23 mm)
ESM Mortise
ESM Faceplate
Strike
Standard Model (Example)
7
9
S
0
1
Model
0
Locking Device
1
1
E
L
3
0
Application
Lever Type
Override
Handing
Version
Bluetooth
6
Finish
2
6
Build the model number with the desired options
7
9
3
Model
Model
Guestroom
79S0
Standalone
79R0
13
79Q0
International
Override
Handing
Version
Bluetooth
Finish
Locking Device
Application
Lever Type
Override
Handing
Version
Bluetooth
Finishes
No locking
mechanism, no strike
Messenger Online
Europe, Asia
Lever Type
00
30
79Y0
Application
23⁄4“ (70 mm) Backset
Messenger Online
Ready
79Z0
Locking Device
ESM, with no face plate, field
reversible handing
ESM, with no face plate, field
reversible handing. Thumbturn
is on inside escutcheon for privacy but can be disabled
1
Interior
2
Exterior
locks
supplied
with gasket
for outside
escutcheon
1
Long/Long
Front
Back
2
Short/Short***
Front
Back
E
Elevon Lever
79N0
Front
Back
790W0
G
Escape Return
Inncom RF
Gala Lever
Utility
Front
Back
Standalone
8
79S1
79R1
Messenger Ready
79Z1
Messenger Online
79Y1
Europe, Asia
79Q1
International
790W1
Inncom RF
Note: Long/Long
Inside at 45°
Front
Back
H
Short/Short***
Inside at 45°
Front
Back
E
Electronic
K
Mechanical key
cylindrical Lori
universal (1539)
key-in-knob
OR
Mechanical
recodable key
cylinder
Must specify
on lock order
which type of
key cylinder is
required
L
Left or
Right
reverse (Y)
R
Right or
Left reverse
(X)
F***
Dual
Handed
(L & R),
Left Hand
Reverse,
Right Hand
Reverse
(X & Y)
3
0
Contactless No BLE
Reader
1
BLE Ready
2
BLE Enabled
626
Satin Chrome
606
Satin Brass
U26
Ultra Satin Chrome
H
BLE Hilton
(only for Hilton
properties)
***ESM Faceplate and Strike - Handing
Mortise face plates are not included with Slim Mortise. To order see below.
13/16” (20 mm) round face plate
with deadbolt cutout ........................................................ 128-508593-D630
without deadbolt cutout .................................................. 128-508593-O630
29/32” (23 mm) round face plate
with deadbolt cutout ........................................................ 128-508595-D630
without deadbolt cutout .................................................. 128-508595-O630
13/16” (20 mm) square face plate
with deadbolt cutout ........................................................ 128-508594-D630
without deadbolt cutout .................................................. 128-508594-O630
71⁄4” (180 mm) Strike with deadbolt
Universal .............................................................................. 041-510141-630K
Note: Gala and Elevon lever only available with electronic override
* For doors greater than 21/2" (63 mm) order a thick door kit in Lock Accessories Miscellaneous section.
** Use short return levers when moldings are within 41/2" (11cm) and 8” (20.32cm) from the edge of the door
*** Locks are assembled “Right-Hand” and may be field reversed for Left-Hand doors.
Messenger locks should be configured with DAJ mortise. Some listed lever options are not available in all finishes
53
Saflok Product Catalog / Order Guide
Saflok RT RFID
Ordering RT Series (Cylindrical Lock***)
1⁄2”
(12.7 mm)
11⁄2”
(38.1 mm)
93⁄8”
(238.1 mm)
1⁄2”
(13 mm)
47⁄8”
(122 mm)
11⁄8”
(29 mm)
35⁄16”
(84.1 mm)
27⁄8”
(73 mm)
Front
31⁄4”
(82.6 mm)
Side
21⁄4”
(58.7 mm)
Back
21⁄4”
(57 mm)
11⁄4”
(32 mm)
115⁄16”
(49 mm)
ASA-Strike
Face Plate
Latch
Back Side
Standard Model (Example)
7
9
S
1
5
Model
0
2
Locking Device
1
E
F
3
0
Lever Type
Override
Handing
Version
Bluetooth
6
Finish
2
6
Build the model number with the desired options
7
9
2
Model
Model
3
Lever Type
Override
Handing
Version
Bluetooth
Finish
Locking Device
Lever Type
Override
Handing
Version
Bluetooth
Finishes
23⁄4“ (70 mm) Backset
Utility
50
79S1
Standalone
79R1
Messenger Ready
79Z1
Messenger Online
79Y1
Europe, Asia
79Q1
International
790W1
Inncom RF
F
Locking Device
2 3/4" (70 mm) Backset with
1/2" (13 mm) latch. Thumbturn
is on inside escutcheon for
privacy but can be disabled
54
23⁄8" (60 mm) Backset with
1/2" (13 mm) latch. Thumbturn
is on inside escutcheon for
privacy but can be disabled
2
Exterior
locks
supplied
with gasket
for outside
escutcheon
1
Long/Long
Front
Back
2
Short/Short***
Front
Back
E
Elevon Lever
Front
Back
G
E
Electronic
K
Mechanical key
cylindrical Lori
universal (1539)
key-in-knob
OR
Mechanical
recodable key
cylinder
Must specify
on lock order
which type of
key cylinder is
required
F
3
0
Dual
Contactless No BLE
Handing
Reader
1
left hand,
BLE Ready
right hand
2
(L & R),
BLE Enabled
Left Hand
Reverse,
H
Right Hand
BLE Hilton
Reverse
(only for Hilton
(X & Y)
properties)
(Assembled
RH)
Gala Lever
Front
Back
Note: 54
* For doors greater than 21/2" (63 mm) order a thick door kit in Lock Accessories Miscellaneous section.
** Use short return levers when moldings are within 41/2" (11cm) and 8” (20.32cm) from the edge of the door
*** Locks are assembled “Right-Hand” and may be field reversed for Left-Hand doors.
Messenger locks should be configured with DAJ mortise. Some listed lever options are not available in all finishes
626
Satin Chrome
606
Satin Brass
U26
Ultra Satin Chrome
Saflok Product Catalog / Order Guide
Saflok MT Series
Lock Overview
The Saflok MT Series is a full-body electronic lock that offers
either magstripe or RFID card reader technology to enhance guest
convenience and improve operational efficiency. Ideal for retrofits,
these locks work with Saflok access management software.
Mobile Access
The MT RFID is Bluetooth Low Energy (BLE) capable and can
operate using the dormakaba Mobile Access Solutions.
Applications
• Suitable for small to very large scale hotels
•Easily replaces existing mechanical or electronic door locks
throughout a facility
•Access control for guest rooms, common areas as well as backof-the-house
Security Features
• High security and tamper-proof design
• 1” solid deadbolt (optional auto deadbolt)
•Staff monitoring - Keycard audits (RFID and smartcard)
MT™ Lock
Low Maintenance
• Batteries last up to 2 years
• Low battery indicator alerts staff
•Lock programming and audit are not erased during battery replacement
• Wear resistant construction and finish
MT™ RFID Lock
Access Management Software
The MT series locks is supported by dormakaba’s robust access management software solution that features an array
of access control workflows for both guest and staff access. Optionally, choose dormakaba’s online access management
solution for superior control and monitoring.
55
Saflok Product Catalog / Order Guide
Saflok MT Series
Overview
Mechanical Features
Description
Electronic mortise lockset with 1” (25.4mm) throw deadbolt and 5/8” (15.9mm) dead-locking latch bolt
Handing
Factory-handed mortise (left, right, left reverse, right reverse)
Lever
Apogee
Arc
Continental
Elevon
Gala
Troy
Deadbolt
1” (25.4mm) throw deadbolt and 5/8” (15.9mm) dead-locking latch bolt
Door Thickness
1 3/4” (44.5mm) to 2 1/8” (53.98mm) for standard product
Shipping Weight
Approx. 8.0 lbs with hardware
Housing
Construction
Escutcheons: brass or stainless steel
Levers: brass, zinc, or stainless steel
Standard Finishes
Inside Trim Options
Standard Backset
Bright chrome, bright brass, satin chrome, satin brass, dark mahogany
MT inside escutcheon
2 3/4” (70mm) backset, 2 3/8” (60mm) backset also available for cylindrical lock
Locking Options
ANSI lock case with 1 1/4” or 1” lock front mortise. Options: automatic deadbolt, door ajar, MKO
European lock case mortise (20 x 165 mm) with 20 x 233 mm lock front mortise
Online
Configurations
Mobile Access
Options (MT RFID)
Messenger Ready: DAJ mortise (ANSI lock case) Standard (stand alone) inside escutcheon
Messenger Online: Lock controller board with Messenger capability DAJ mortise (ANSI lock case)
Inside escutcheon equipped with Messenger module
BLE compatible (Standard): upgradable to BLE by adding end cap and BLE module
BLE ready: upgradable to BLE by adding BLE module
BLE enabled: BLE module included, no further upgrades needed
Certifications and Testing
Accessibility
standard
ADA compliant levers (Code of Federal Regulations 28 CFR Part 36 – 1994 “ADA Standards for Accessible
Design”)
Fire rating
Listed for pre-prepared manufactured doors and certified for retrofitting on existing doors by
Underwriters Laboratories for use on fire doors having up to a three-hour rating.
U.L. Certification: GWVW.R12071 “Accessories for Single-point Locks and Latches and Fire Exit
Hardware.” Evaluated in accordance with UL 10B and UL 10C.
a. U.L. Listing: GYQS.R11247 “Electrically Controlled Single-point Locks and Latches.” Evaluated in
accordance b. with UL 10B and UL 10C. c. Also classified in accordance with Uniform Building Code
Standard 7-2, “Fire Test of Door Assemblies” (1997)
BHMA/ANSI
Certified to be compliant with Grade 1 performance tests for “ANSI/BHMA A156.13 - 2012
"American National Standard for Mortise Locks and Latches," and “ANSI/BHMA A156.25 - 2013
"American National Standard for Electrified Locking Devices." (Only locks tested and approved by
nonbiased third-party test lab are allowed in the “BHMA Certified Products Directory” found at
www.buildershardware.com)
Electronics
MT Magstripe: FCC Part 15 Class A and CE Directive 2014/30/EU compliant
MT RFID: FCC Part 15 Class A and CE Directive 2014/53/EU compliant
Environmental
operating
conditions
Indoor side: 32°F to 151°F (0°C to 66°C)
Outdoor side: -31°F to 151°F (-35°C to 66°C)
0% to 85% non-condensing humidity at 86°F (30°C)
56
Saflok Product Catalog / Order Guide
Saflok MT Series
Overview
Warranty
Warranty
2 years
Batteries
Alkaline
4 AA batteries for up to 2 years. Low battery LED signal alerts user that batteries need to be
changed soon
Lock Operation
Date/time stamp
Real time; date and hours/minutes
Interrogation
Obtain key usage reports from the lock by using a handheld unit at the door, or increase
efficiency by performing a remote Interrogation using Messenger (optional)
Pre-registered
keycards
Keys can be made up to ten days in advance without cancelling current or arriving guests
Key expiry
Configurable expiration dates; can be automatically set for check out date or manually applied
when making key during check in process.
Passage mode
Set by authorized keycard or Messenger system. Can also be configured to perform an
automated / pre-defined passage mode time.
Lockout mode
Set by authorized credential or the MessengerTM System
Keycards accepted
MT Magstripe: Magstripe and smartcard keycards
MT RFID: Mifare Classic (4 byte NUID), Mifare Plus and Mifare Ultralight C keycards
Feedback
Light indicators in reader
Diagnostics
Light indicators and handheld display
Audit memory
Up to 4,000 events
Privacy override
Emergency keycards
Disability Feature
RCU readers interface with automatic power operated doors for special openings
57
Saflok Product Catalog / Order Guide
Saflok MT Series (Magstripe)
Ordering
3.50"
88.9mm
R
F
10.13"
257.3mm
10.13"
257.3mm
2.74"
69.60mm
2.75"
69.8mm
2.23"
56.6mm
MT Front
1.75"
44.4mm
ASM Mortise
MT Back Side
Standard Model (Example) (Continue building the model number to the right)
Model
Version
M T
1
Locking Mechanism
Communication
1
1
N
N
Mortise
Faceplate
Primary
Secondary
Application
Lever
0
Handing
A
0
Type
Position
L
Build the model number with the desired options (Continue building the model number to the right)
Model
Version
M T
1
Locking Mechanism
Mortise
Style
MT
MT Card
Version
1
1
Standard
2
ADB
3
Utility
4
Standard DAJ
5
ADB DAJ
ASM:
1
1 1/4" (32 mm)
2
1" (25 mm)
Dummy:
D
Dummy (no
faceplate)
ESM:
6
A
7
B
Utility DAJ
Utility ADB
8
Utility ADB DAJ
9
NDB
A
NDB Utility
B
NDB DAJ
C
NDB UTL DAJ
Dummy:
D
Dummy
ESM:
G
Euro
H
Euro Utility
58
Faceplate
Locking Mechanism
Mortise
Faceplate
ASM:
Communication
20mm
23mm
Primary
N
X
Primary Ready
A
Zigbee
North America
(158mW)
B
Zigbee
Europe / Asia
(10mW)
C
Zigbee
International
(87mW)
D
Inncom RF
E
Crestron
F
Telkonet
Lever
Secondary
Communication
Primary
Secondary
No Primary
Application
N
No Secondary
Type
Application
0
A
E
C
Interior
Exterior
Type
Arc
Continental
E
Elevon
G
Gala
K
Regal Knob
P
Apogee
T
Troy
Handing
Position
Lever
0
Position
Standard
1
Vert I/S
2
Vert O/S
3
Vert I/S & O/S
Handing
L
Left Hand
R
Right Hand
X
Left Hand
Reverse
Y
Right Hand
Reverse
Saflok Product Catalog / Order Guide
Saflok MT Series (Magstripe)
Ordering
3.50"
88.9mm
R
F
10.13"
257.3mm
10.13"
257.3mm
2.74"
69.60mm
2.75"
69.8mm
2.23"
56.6mm
MT Front
1.75"
44.4mm
ASM Mortise
MT Back Side
Standard Model (Example) (Continued)
Door Size
Optional Adjustment
Finish
A
N
0
0
0
0
Thickness
Offset
Outside
Inside
Special Hardware/Functionality
Packout
B
B
Build the model number with the desired options (Continued)
Door Size
Optional Adjustment
N
Thickness
A
Finish
0
Offset
Outside
Inside
Special Hardware/Functionality
Packout
Door Size
Thickness
Offset
Outside
Inside
Optional Adjustment
Special Hardware/Functionality
Packout
1.75" (44mm)
B*
1.38" (35-40mm)
C
N
No Offset
0
Standard
E
0
Standard
Vintage Housing
2.00" (51mm)
D
2.25" (57mm)
E
2.38" (60mm)
F
2.50" (63.5mm)
G
2.87"-3.00"
(73-76mm)
H
3.03" (77mm)
J
3.35" (85mm)
K
3.90" (100mm)
0
0
B
A
Standard
Tamper Switch
M
Dummy w/ Messenger Cap
Standard
Custom Strike
B
Ocean Shipment
C
Ocean/Custom Strike
D
Ocean/Australia Strike
E
Demo Lock*
* Demo lock only available
in 1-3/4" RH door
Finish
BB
Bright Brass
BC
Bright Chrome
BK
Black
OZ
Dark Mahogany
SC
Satin Chrome
SN
Satin Nickel
SB
Satin Brass
*Knob only
available in BB, BS,
SB, SS
** Continental not
available in SN
***Only SC, BC, OZ,
and BK approved
for exterior
application
Note: * 1" Faceplate required for 1.38" (35-40mm) door size
Messenger locks should be configured with DAJ mortise.
Some listed lever options are not available in all finishes
59
Saflok Product Catalog / Order Guide
Saflok MT Mechanical Key Override (MKO)
Ordering
3.50"
88.9mm
1.60"
40.6mm
R
F
10.13"
257.3mm
10.13"
257.3mm
2.74"
69.6mm
2.75"
69.8mm
2.23"
56.6mm
MT Front
1.75"
44.4mm
ASM Mortise
MT Back Side
Standard Model (Example) (Continue building the model number to the right)
Model
Version
M T
1
Locking Mechanism
Communication
M
1
N
N
Mortise
Faceplate/Cylinder
Primary
Secondary
Application
Lever
0
Handing
A
0
Type
Position
L
Build the model number with the desired options (Continue building the model number to the right)
Model
Version
M T
1
Locking Mechanism
MT
MT Card
Version
1
M
Faceplate/Cylinder
Locking Mechanism
Mortise Faceplate/Cylinder
MKO
N
MKO UTL
P
MKO NDB
R
MKO NDB UTL
1
1-1/4" (32mm)
No Cylinder
3
1-1/4" (32mm)
Non SFIC Keyed
Differently
5
S
1-1/4" (32mm) Non
SFIC Keyed Alike
T
1-1/4" (32mm) SFIC
CON MKO
CON MKO UTL
U
CON MKO NDB
V
CON MKO NDB
UTL
7**
2
1" (25mm) No
Cylinder
4
1" (25mm) Non SFIC
Keyed
Differently
6
1" (25mm) Non SFIC
Keyed Alike
N
Primary
No Primary
X
Primary Ready
A
Zigbee
North America
(158mW)
B
Zigbee Europe /
Asia (10mW)
C
Zigbee
International
(87mW)
D
Inncom RF
E
Crestron
F
Telkonet
1" (25mm) SFIC
60
Lever
Secondary
Communication
Primary
Secondary
8**
Note: Application
Handing
N
Mortise
Style
Communication
* 1" Faceplate required for 1.38" (35-40mm) door size
**SFIC does not include core
Some listed lever options are not available in all finishes
N
No Secondary
Type
Application
0
A
E
C
Interior
Exterior
Type
Arc
Continental
E
Elevon
G
Gala
K
Regal Knob
P
Apogee
T
Troy
Position
Lever
0
Position
Standard
1
Vert I/S
2
Vert O/S
3
Vert I/S & O/S
Handing
L
Left Hand
R
Right Hand
X
Left Hand
Reverse
Y
Right Hand
Reverse
Saflok Product Catalog / Order Guide
Saflok MT Mechanical Key Override (MKO)
Ordering
3.50"
88.9mm
1.60"
40.6mm
R
F
10.13"
257.3mm
10.13"
257.3mm
2.74"
69.6mm
2.75"
69.8mm
2.23"
56.6mm
MT Front
1.75"
44.4mm
ASM Mortise
MT Back Side
Standard Model (Example) (Continued)
Door Size
Optional Adjustment
Finish
A
N
0
0
0
0
Thickness
Offset
Outside
Inside
Special Hardware/Functionality
Packout
B
B
Build the model number with the desired options (Continued)
Door Size
Finish
N
0
0
Offset
Outside
Inside
Special Hardware/Functionality
Packout
Door Size
Thickness
Offset
Outside
Inside
Optional Adjustment
Special Hardware/Functionality
Packout
Thickness
A
Optional Adjustment
1.75" (44mm)
B*
N
No Offset
0
Standard
0
Standard
1.38" (35-40mm)
C
2.00" (51mm)
D
2.25" (57mm)
E
2.38" (60mm)
F
2.50" (63.5mm)
G
2.87"-3.00"
(73-76mm)
H
3.03" (77mm)
J
3.35" (85mm)
K
3.90" (100mm)
0
0
B
A
Standard
Tamper Switch
Standard
Custom Strike
B
Ocean Shipment
C
Ocean/Custom Strike
D
Ocean/Australia Strike
E
Demo Lock*
Demo lock only available in
1-3/4 RH Door. Demo only
with KD cylinder
Finish
BB
Bright Brass
BC
Bright Chrome
BK
Black
OZ
Dark Mahogany
SC
Satin Chrome
SN
Satin Nickel
SB
Satin Brass
*Knob only available
in BB, BS, SB, SS
** Continental not
available in SN
***Only SC, BC, OZ,
and BK approved
for exterior
application
Note: * 1" Faceplate required for 1.38" (35-40mm) door size
Some listed lever options are not available in all finishes
61
Saflok Product Catalog / Order Guide
Saflok MT Series (RFID)
Ordering
3.50"
88.9mm
R
F
10.13"
257.3mm
10.13"
257.3mm
2.74"
69.60mm
2.75"
69.8mm
2.23"
56.6mm
MT RFID Front
1.75"
44.4mm
ASM Mortise
MT Back Side
Standard Model (Example) (Continue building the model number to the right)
Model
Version
M R
1
Locking Mechanism
Communication
1
1
N
A
Mortise
Faceplate
Primary
Secondary
Application
Lever
0
Handing
A
0
Type
Position
L
Build the model number with the desired options (Continue building the model number to the right)
Model
Version
M R
1
Locking Mechanism
Mortise
Style
MR
MT RFID
Version
1
1
Standard
2
ADB
3
Utility
4
Standard DAJ
5
ADB DAJ
ASM:
1
1 1/4" (32 mm)
2
1" (25 mm)
Dummy:
D
Dummy (no
faceplate)
ESM:
6
A
7
B
Utility DAJ
Utility ADB
8
Utility ADB DAJ
9
NDB
A
NDB Utility
B
NDB DAJ
C
NDB UTL DAJ
Dummy:
D
Dummy
ESM:
G
Euro
H
Euro Utility
62
Faceplate
Locking Mechanism
Mortise
Faceplate
ASM:
Communication
20mm
23mm
Primary
N
X
Primary Ready
A
Zigbee
North America
(158mW)
B
Zigbee Europe/
Asia (10mW)
C
Zigbee
International
(87mW)
A
B
E
C
BLE Ready
C
BLE Enabled
D
Hilton BLE*
G
BLE Mod Bracket
H
Hilton BLE Mod
Bracket*
E
No Secondary (for
Dummy Only)
F
Telkonet
Application
0
BLE Compatible
Dummy:
Crestron
Type
A
D
Inncom RF
Lever
Secondary
Communication
Primary
Secondary
No Primary
Application
N
* Hilton BLE
(only for Hilton
properties)
Interior
Exterior
Type
Arc
Continental
E
Elevon
G
Gala
K
Regal Knob
P
Apogee
T
Troy
Handing
Position
Lever
0
Position
Standard
1
Vert I/S
2
Vert O/S
3
Vert I/S & O/S
Handing
L
Left Hand
R
Right Hand
X
Left Hand
Reverse
Y
Right Hand
Reverse
Saflok Product Catalog / Order Guide
Saflok MT Series (RFID)
Ordering
3.50"
88.9mm
R
F
10.13"
257.3mm
10.13"
257.3mm
2.74"
69.60mm
2.75"
69.8mm
2.23"
56.6mm
MT RFID Front
1.75"
44.4mm
ASM Mortise
MT Back Side
Standard Model (Example) (Continued)
Door Size
Optional Adjustment
Finish
A
N
0
0
0
0
Thickness
Offset
Outside
Inside
Special Hardware/Functionality
Packout
B
B
Build the model number with the desired options (Continued)
Door Size
Optional Adjustment
N
Thickness
A
Finish
0
Offset
Outside
Inside
Special Hardware/Functionality
Packout
Door Size
Thickness
Offset
Outside
Inside
Optional Adjustment
Special Hardware/Functionality
Packout
1.75" (44mm)
B*
1.38" (35-40mm)
C
2.00" (51mm)
D
2.25" (57mm)
E
2.38" (60mm)
N
No Offset
0
Standard
A
0
Standard
Plain Lens
L
Marriott Lens*
Marriott Lens
only for Marriott
Properties
F
2.50" (63.5mm)
G
2.87"-3.00"
(73-76mm)
H
3.03" (77mm)
J
3.35" (85mm)
K
3.90" (100mm)
0
0
B
A
Standard
Tamper Switch
M
Dummy w/ Messenger Cap
N
Dummy w/ Double Messenger Cap
Standard
Custom Strike
B
Ocean Shipment
C
Ocean/Custom Strike
D
Ocean/Australia Strike
E
Demo Lock*
Demo lock only available in
1-3/4" RH door
Finish
BB
Bright Brass
BC
Bright Chrome
BK
Black
OZ
Dark Mahogany
SC
Satin Chrome
SN
Satin Nickel
SB
Satin Brass
*Knob only available
in BB, BS, SB, SS
** Continental not
available in SN
***Only SC, BC, OZ,
and BK approved
for exterior
application
Note: * 1" Faceplate required for 1.38" (35-40mm) door size
Messenger locks should be configured with DAJ mortise.
Some listed lever options are not available in all finishes
63
Saflok Product Catalog / Order Guide
Saflok ädəse
Lock Overview
The Saflok ädəse electronic lock blends distinctive elegance with superior lock performance & security. The lock reads
smart, memory and magstripe keycards as standard and works with the dormakaba access management software.
Applications
•Suitable for small to very large scale hotels
•Easily replaces existing mechanical or electronic door locks throughout a facility
•Access control for guest rooms, common areas as well as back-of-the-house
Security Features
•High security and tamper-proof design
•1” solid deadbolt (optional auto deadbolt)
•Staff monitoring - Keycard audits (smartcard)
Low Maintenance
•Batteries last up to 2 years
•Low battery indicator alerts staff
•Lock programming and audit are not erased during battery replacement
•Wear resistant construction and finish
Mechanical Features
Description
Electronic mortise lockset with 1” (25.4mm) throw deadbolt and 5/8” (15.9mm) dead-locking latch
bolt
Handing
Factory-handed mortise (left, right, left reverse, right reverse)
Lever
Apogee
Arc
Continental
Elevon
Gala
Troy
Deadbolt
1” (25.4mm) throw deadbolt and 5/8” (15.9mm) dead-locking latch bolt
Door Thickness
1 3/4” (44.5mm) to 2 1/8” (53.98mm) for standard product
Shipping Weight
Approx. 8.0 lbs with hardware
Housing
Construction
Escutcheons: Stainless steel or brass
Levers: Brass, zinc, or stainless steel
Standard Finishes
Inside Trim Options
Standard Backset
Bright chrome, bright brass, satin chrome, satin brass, dark mahogany
ädəse
2 3/4” (70mm) from door edge to lever
Locking Options
ANSI lock case with 1 1/4” or 1” lock front mortise. Options: automatic deadbolt, door ajar, MKO
European lock case mortise (20 x 165 mm) with 20 x 233 mm lock front mortise
Online
Configurations
64
Messenger Ready DAJ mortise (ANSI lock case) Standard with ädesé inside escutcheon
Messenger Online Lock controller board with Messenger capability DAJ mortise (ANSI lock
case) Inside escutcheon equipped with Messenger module
Saflok Product Catalog / Order Guide
Saflok ädəse
Overview
Certifications and Testing
Accessibility
standard
Fire rating
BHMA/ANSI
ADA compliant levers (Code of Federal Regulations 28 CFR Part 36 – 1994 “ADA Standards for
Accessible Design”)
Listed for pre-prepared manufactured doors and certified for retrofitting on existing doors by
Underwriters Laboratories for use on fire doors having up to a three-hour rating.
a. U.L. Certification: GWVW.R12071 “Accessories for Single-point Locks and Latches and Fire
Exit Hardware.” Evaluated in accordance with UL 10B and UL 10C. b. U.L. Listing: GYQS.R11247
“Electrically Controlled Single-point Locks and Latches.” Evaluated in accordance
with UL 10B and UL 10C. c. Also classified in accordance with Uniform Building Code Standard 7-2,
“Fire Test of Door Assemblies” (1997)
Certified to be compliant with Grade 1 performance tests for “ANSI/BHMA A156.13 - 2012
"American National Standard for Mortise Locks and Latches," and “ANSI/BHMA A156.25 - 2013
"American National Standard for Electrified Locking Devices." (Only locks tested and approved
by nonbiased third-party test lab are allowed in the “BHMA Certified Products Directory” found
at www.buildershardware.com)
Electronics
FCC Part 15 Class A and CE directive 2014/30/EU compliant
Environmental
operating
conditions
Indoor side: 32°F to 151°F (0°C to 66°C)
Outdoor side: -31°F to 151°F (-35°C to 66°C)
0% to 85% non-condensing humidity at 86°F (30°C)
Warranty
Warranty
2 years
Batteries
Alkaline
4 AA batteries for up to 2 years. Low battery LED signal alerts user that batteries need to be
changed soon
Lock Operation
Date/time stamp
Real time; date and hours/minutes
Interrogation
Obtain key usage reports from the lock by using a handheld unit at the door, or increase
efficiency by performing a remote Interrogation using Messenger (optional)
Pre-registered
keycards
Keys can be made up to ten days in advance without cancelling current or arriving guests
Key expiry
Configurable expiration dates; can be automatically set for check out date or manually applied
when making key during check in process.
Passage mode
Set by authorized keycard or Messenger system. Can also be configured to perform an
automated / pre-defined passage mode time.
Lockout mode
Set by authorized credential or the MessengerTM System
Keycards accepted
Magstripe, smartcard
Feedback
Light indicators in reader
Diagnostics
Light indicators and handheld display
Audit memory
Up to 4,000 events
Privacy override
Emergency keycards
Disability Feature
RCU readers interface with automatic power operated doors for special openings
65
Saflok Product Catalog / Order Guide
Saflok ädəse (ASM/ESM)
Ordering
.88”
22.35mm
F
R
10.27”
260.8mm
3.55”
90.17mm
10.27”
260.8mm
2.75”
69.8mm
.70”
17.7mm
ädəse Front
ASM Mortise
ädəse Back Side
Standard Model (Example) (Continue building the model number to the right)
Model
X
Version
F
Locking Mechanism
1
Communication
1
1
N
N
Mortise
Faceplate
Primary
Secondary
Application
Lever
0
Handing
A
0
Type
Position
L
Build the model number with the desired options (Continue building the model number to the right)
Model
X
Version
F
Locking Mechanism
1
XF
ädəse Card
Version
1
Faceplate
Locking Mechanism
Mortise
Faceplate
ASM:
1
Standard
2
ADB
3
Utility
4
Standard DAJ
5
ADB DAJ
ASM:
1
1 1/4" (32 mm)
2
1" (25 mm)
Dummy:
D
Dummy (No
Faceplate)
ESM:
6
A
7
B
Utility DAJ
Utility ADB
8
Utility ADB DAJ
9
NDB
A
NDB Utility
B
NDB DAJ
C
NDB UTL DAJ
Dummy:
D
Dummy
ESM:
G
Euro
H
Euro Utility
66
Application
Lever
Handing
N
Mortise
Style
Communication
20mm
23mm
Primary
N
Communication
Primary
Secondary
No Primary
X
Primary Ready
A
Zigbee
North America
(158mW)
B
Zigbee Europe /
Asia (10mW)
C
Zigbee
International
(87mW)
D
Inncom RF
E
Crestron
F
Secondary
Telkonet
N
No Secondary
Type
Application
0
A
E
C
Interior
Exterior
Type
Arc
Continental
E
Elevon
G
Gala
K
Regal Knob
P
Apogee
T
Troy
Position
Lever
0
Position
Standard
1
Vert I/S
2
Vert O/S
3
Vert I/S & O/S
Handing
L
Left Hand
R
Right Hand
X
Left Hand
Reverse
Y
Right Hand
Reverse
Saflok Product Catalog / Order Guide
Saflok ädəse (ASM/ESM)
Ordering
.88”
22.35mm
R
10.27”
260.8mm
3.55”
90.17mm
F
10.27”
260.8mm
2.75”
69.8mm
.70”
17.7mm
ädəse Front
ASM Mortise
ädəse Back Side
Standard Model (Example) (Continued)
Door Size
Optional Adjustment
Finish
A
N
0
0
0
0
Thickness
Offset
Outside
Inside
Special Hardware/Functionality
Packout
A
B
Build the model number with the desired options (Continued)
Door Size
Optional Adjustment
N
Thickness
A
Finish
0
Offset
Outside
Inside
Special Hardware/Functionality
Packout
Door Size
Thickness
Offset
Outside
Inside
Optional Adjustment
Special Hardware/Functionality
Packout
1.75" (44mm)
B*
N
No Offset
0
Standard
0
Standard
1.38" (35-40mm)
C
2.00" (51mm)
D
2.25" (57mm)
E
2.38" (60mm)
F
2.50" (63.5mm)
G
2.87"-3.00"
(73-76mm)
H
3.03" (77mm)
J
3.35" (85mm)
K
3.90" (100mm)
ädəse only available
in ADB or Utility
for door thickness
greater than 2.00"
(51mm)
0
0
B
A
Standard
Tamper Switch
M
Dummy w/ Messenger Cap
N
Dummy w/ Double Messenger Cap
Standard
Custom Strike
B
Ocean Shipment
C
Ocean/Custom Strike
D
Ocean/Australia Strike
E
Demo Lock*
Demo lock only available in
1-3/4 RH Door.
Finish
AB
Antique Brass
BB
Bright Brass
BC
Bright Chrome
BK
Black
OZ
Dark Mahogany
SC
Satin Chrome
SN
Satin Nickel
SB
Satin Brass
*Knob only
available in BB, BS,
SB, SS
** Continental not
available in SN
***Only SC, BC, OZ,
and BK approved
for exterior
application
Note: * 1" Faceplate required for 1.38" (35-40mm) door size
Messenger locks should be configured with DAJ mortise.
Some listed lever options are not available in all finishes
67
Saflok Product Catalog / Order Guide
Saflok Quantum Series
Lock Overview
The Saflok Quantum lock series offers a unique two-piece modular design with a choice of inside escutcheon look.
Synonymous with superior performance, the lock series is renowned for access control, life safety and security. The
Quantum Series locks are easy to use and work with dormakaba Access Management Software.
Mobile Access
The Quantum RFID Series are Bluetooth Low Energy (BLE) capable and can operate
using the dormakaba Mobile Access Solutions.
Applications
•Suitable for small to very large scale hotels
•Easily replaces existing mechanical or electronic door locks throughout a facility
•Access control for guest rooms, common areas as well as back-of-house
Security Features
•High security and tamper-proof design
•1” solid deadbolt (optional auto deadbolt)
•Staff monitoring - Keycard audits (RFID and smartcard)
•Tracking mortise for door ajar reporting (ädəse standard, MT optional)
•Emergency access: emergency key, mechanical key (QuantumII, QuantumIII and
QuantumIV) and electronic override
Quantum MT
Quantum RFID
Low Maintenance
•Batteries last up to 2 years
•Low battery indicator alerts staff
•Lock programming and audit records are not erased during battery replacement
•Operates with a completely sealed contactless reader (RFID only)
QuantumII
QuantumIII
Access control management software
The Quantum Series locks are supported by dormakaba’s robust access
management software solution that features an array of access control
workflows for both guest and staff access. Optionally, choose dormakaba’s
online access management solution for better superior control and monitoring.
QuantumIV
Quantum Pixel
69
Saflok Product Catalog / Order Guide
Saflok Quantum Series
Overview
Mechanical Features
Description
Electronic mortise lockset with 1” (25.4mm) throw deadbolt and 5/8” (15.9mm) dead-locking latch bolt
Handing
Factory-handed mortise (left, right, left reverse, right reverse)
Lever
Apogee
Arc
Continental
Elevon
Gala
Troy
Deadbolt
Door Thickness
Shipping Weight
1” (25.4mm) throw deadbolt and 5/8” (15.9mm) dead-locking latch bolt
1 3/4” (44.5mm) to 2 1/8” (53.98mm) for standard product
Approx. 8.0 lbs with hardware
Housing Construction
Escutcheons: brass or stainless steel
Levers: brass, zinc, or stainless steel
Standard Finishes
Inside Trim Options
Standard Backset
Bright chrome, bright brass, satin chrome, satin brass, dark mahogany
Optional ädəse or MT inside escutcheon
2 3/4” (70mm) backset, 2 3/8” (60mm) backset also available for cylindrical lock
Locking Options
ANSI lock case with 1 1/4” or 1” lock front mortise. Options: automatic deadbolt, door ajar, MKO
European lock case mortise (20 x 165 mm) with 20 x 233 mm lock front mortise
Online
Configurations
Mobile Access
Options (BLE)
Quantum RFID
Series only
70
Messenger Ready: DAJ mortise (ANSI lock case) Standard (stand alone) inside escutcheon
Messenger Online: Lock controller board with Messenger capability DAJ mortise (ANSI lock
case) Inside escutcheon equipped with Messenger module
BLE compatible (standard): upgradable to BLE by adding end cap and BLE module
BLE ready: end cap included, upgradable to BLE by adding BLE module
BLE enabled: end cap with BLE module included, no further upgrades needed
Saflok Product Catalog / Order Guide
Saflok Quantum Series
Overview
Certifications and Testing
Accessibility
standard
ADA compliant levers (Code of Federal Regulations 28 CFR Part 36 – 1994 “ADA Standards for
Accessible Design”)
Fire rating
Listed for pre-prepared manufactured doors and certified for retrofitting on existing doors by
Underwriters Laboratories for use on fire doors having up to a three-hour rating.
U.L. Certification: GWVW.R12071 “Accessories for Single-point Locks and Latches and Fire Exit
Hardware.” Evaluated in accordance with UL 10B and UL 10C.
a. U.L. Listing: GYQS.R11247 “Electrically Controlled Single-point Locks and Latches.” Evaluated
in accordance b. with UL 10B and UL 10C. c. Also classified in accordance with Uniform Building
Code Standard 7-2, “Fire Test of Door Assemblies” (1997)
BHMA/ANSI
Certified to be compliant with Grade 1 performance tests for “ANSI/BHMA A156.13 - 2012
"American National Standard for Mortise Locks and Latches," and “ANSI/BHMA A156.25 - 2013
"American National Standard for Electrified Locking Devices." (Only locks tested and approved
by nonbiased third-party test lab are allowed in the “BHMA Certified Products Directory” found
at www.buildershardware.com)
Electronics
Quantum Magstripe: FCC Part 15 Class A and CE Directive 2014/30/EU compliant
Quantum RFID: FCC Part 15 Class A and CE Directive 2014/53/EU compliant
Environmental
operating conditions
Indoor side: 32°F to 151°F (0°C to 66°C)
Outdoor side: -31°F to 151°F (-35°C to 66°C)
0% to 85% non-condensing humidity at 86°F (30°C)
Warranty
Warranty
2 years
Batteries
Alkaline
4 AA batteries for up to 2 years. Low battery LED signal alerts user that batteries need to be
changed soon
Lock Operation
Date/time stamp
Real time; date and hours/minutes
Interrogation
Obtain key usage reports from the lock by using a handheld unit at the door, or increase
efficiency by performing a remote Interrogation using Messenger (optional)
Pre-registered
keycards
Keys can be made up to ten days in advance without cancelling current or arriving guests
Key expiry
Configurable expiration dates; can be automatically set for check out date or manually applied
when making key during check in process.
Passage mode
Set by authorized keycard or Messenger system. Can also be configured to perform an
automated / pre-defined passage mode time.
Lockout mode
Set by authorized credential or the MessengerTM System
Keycards accepted
Quantum Magstripe: Magstripe and smartcard keycards
Quantum RFID series: Mifare Classic (4 byte NUID), Mifare Plus and Mifare Ultralight C
keycards)
Feedback
Light indicators in reader
Diagnostics
Light indicators and handheld display
Audit memory
Up to 4,000 events
Privacy override
Emergency keycards
Disability Feature
RCU readers interface with automatic power operated doors for special openings
71
Saflok Product Catalog / Order Guide
Saflok Quantum MT
Ordering
3.55"
90.1mm
3.38"
85.8mm
3.50"
88.9mm
8.44"
5.84"
214.3mm 148.3mm
10.27"
260.8mm
10.13"
257.3mm
2.75"
69.8mm
Quantum MT
Front
ädƏse
Inside
MT Inside
Standard Model (Example) (Continue building the model number to the right)
Model
Version
Q C
1
Locking Mechanism
Communication
1
1
N
N
Mortise
Faceplate
Primary
Secondary
Application
Lever
0
Handing
A
0
Type
Position
L
Build the model number with the desired options (Continue building the model number to the right)
Model
Version
Q
Locking Mechanism
QC
Quantum
Card MT
QX
Quantum
Card ädƏse
Version
1
Faceplate
Locking Mechanism
Mortise
Faceplate
ASM:
1
Standard
2
ADB
3
Utility
4
Standard DAJ
5
ADB DAJ
ASM:
1
1 1/4" (32 mm)
2
1" (25 mm)
Dummy
D:
Dummy (No
Faceplate)
ESM:
6
A
7
B
Utility DAJ
Utility ADB
8
Utility ADB DAJ
9
NDB
A
NDB Utility
B
NDB DAJ
C
NDB UTL DAJ
Dummy:
D
Dummy
ESM:
G
Euro
H
Euro Utility
72
Application
Lever
Handing
1
Mortise
Style
Communication
20mm
23mm
Primary
N
Communication
Primary
Secondary
No Primary
X
Primary Ready
A
Zigbee
North America
(158mW)
B
Zigbee Europe /
Asia (10mW)
C
Zigbee
International
(87mW)
D
Inncom RF
E
Crestron
F
Secondary
Telkonet
N
No Secondary
Type
Application
0
A
E
C
Wood Interior
Wood Exterior
Type
Arc
Continental
E
Elevon
G
Gala
K
Regal Knob
P
Apogee
T
Troy
Position
Lever
0
Position
Standard
1
Vert I/S
Handing
L
Left Hand
R
Right Hand
X
Left Hand
Reverse
Y
Right Hand
Reverse
Saflok Product Catalog / Order Guide
Saflok Quantum MT
Ordering
3.55"
90.1mm
3.38"
85.8mm
3.50"
88.9mm
8.44"
5.84"
214.3mm 148.3mm
10.27"
260.8mm
10.13"
257.3mm
2.75"
69.8mm
Quantum MT
Front
ädƏse
Inside
MT Inside
Standard Model (Example) (Continued)
Door Size
Optional Adjustment
Finish
A
N
0
0
0
0
Thickness
Offset
Outside
Inside
Special Hardware/Functionality
Packout
A
B
Build the model number with the desired options (Continued)
Door Size
Finish
N
0
Offset
Outside
Inside
Special Hardware/Functionality
Packout
Door Size
Thickness
Offset
Outside
Inside
Optional Adjustment
Special Hardware/Functionality
Packout
Thickness
A
Optional Adjustment
1.75" (44mm)
B*
1.38" (35-40mm)
C
2.00" (51mm)
D
2.25" (57mm)
E
N
No Offset
0
Standard
0
Standard
0
0
A
A
Standard
Escape Return
B
Tamper Switch
T
Toggle (MT only)
2.38" (60mm)
F
2.50" (63.5mm)
G
2.87"-3.00"
(73-76mm)
H
3.03" (77mm)
J
3.35" (85mm)
K
3.90" (100mm)
ädəse only available
in ADB or Utility
for door thickness
greater than 2.00"
(51mm)
Standard
Custom Strike
B
Ocean Shipment
C
Ocean/Custom Strike
D
Ocean/Australia Strike
E
Demo Lock*
Demo lock only available in
1-3/4" RH door
Finish
AB
Antique Brass
BB
Bright Brass
BC
Bright Chrome
BK
Black
OZ
Dark Mahogany
SC
Satin Chrome
SN
Satin Nickel
SB
Satin Brass
*Knob only
available in BB, BS,
SB, SS
*AB only available
with ädƏse I/S
*Continental not
available in SN
*Only SC, BC, OZ,
and BK approved
for exterior
application
Note: * 1" Faceplate required for 1.38" (35-40mm) door size
Messenger locks to be configured with DAJ mortise for optimal functionality
Some listed lever options are not available in all finishes
73
Saflok Product Catalog / Order Guide
Saflok Quantum RFID
Ordering
3.55"
90.1mm
3.50"
88.9mm
2.95"
74.9mm
8.44"
214.3mm
Quantum RFID
Front
10.13"
257.3mm
10.27"
260.8mm
2.82"
71.6mm
ädƏse
Inside
MT Inside
Standard Model (Example) (Continue building the model number to the right)
Model
Version
Q M
1
Locking Mechanism
Communication
1
1
N
A
Mortise
Faceplate
Primary
Secondary
Application
Lever
0
Handing
A
0
Type
Position
L
Build the model number with the desired options (Continue building the model number to the right)
Model
Version
Q
Locking Mechanism
QM
Quantum
RFID MT
QA
Quantum
RFID ädƏse
Version
1
Faceplate
Locking Mechanism
Mortise
Faceplate
ASM:
1
Standard
2
ADB
3
Utility
4
Standard DAJ
5
ADB DAJ
ASM:
1
1 1/4" (32 mm)
2
1" (25 mm)
Dummy:
D
Dummy (no
faceplate)
ESM:
6
A
7
B
Utility DAJ
Utility ADB
8
Utility ADB DAJ
9
NDB
A
NDB Utility
B
NDB DAJ
C
NDB UTL DAJ
Dummy:
D
Dummy
ESM:
G
Euro
H
Euro Utility
74
Application
Lever
Handing
1
Mortise
Style
Communication
20mm
23mm
Primary
N
Secondary
Communication
Primary
Secondary
No Primary
X
Primary Ready
A
Zigbee
North America
(158mW)
B
Zigbee Europe /
Asia (10mW)
C
Zigbee
International
(87mW)
0
A
B
E
C
BLE Compatible
BLE Ready
C
BLE Enabled
D
Hilton BLE*
G
BLE Mod Bracket
H
Hilton BLE Mod
Bracket*
D
E
No Secondary (for
Dummy Only)
Crestron
F
Telkonet
Application
A
Dummy:
Inncom RF
Type
N
Hilton BLE
(only for Hilton
properties)
Wood Interior
Wood Exterior
H
Wood Heavy
1
Metal Interior
F
Metal Exterior
J
Metal Heavy
Type
Arc
Continental
E
Elevon
G
Gala
K
Regal Knob
P
Apogee
T
Troy
Position
Lever
0
Position
Standard
1
Vert I/S
Handing
L
Left Hand
R
Right Hand
X
Left Hand
Reverse
Y
Right Hand
Reverse
Saflok Product Catalog / Order Guide
Saflok Quantum RFID
Ordering
3.55"
90.1mm
3.50"
88.9mm
2.95"
74.9mm
8.44"
214.3mm
Quantum RFID
Front
10.13"
257.3mm
10.27"
260.8mm
2.82"
71.6mm
ädƏse
Inside
MT Inside
Standard Model (Example) (Continued)
Door Size
Optional Adjustment
Finish
A
N
0
0
0
0
Thickness
Offset
Outside
Inside
Special Hardware/Functionality
Packout
A
B
Build the model number with the desired options (Continued)
Door Size
Finish
N
0
Offset
Outside
Inside
Special Hardware/Functionality
Packout
Door Size
Thickness
Offset
Outside
Inside
Optional Adjustment
Special Hardware/Functionality
Packout
Thickness
A
Optional Adjustment
1.75" (44mm)
B*
1.38" (35-40mm)
C
2.00" (51mm)
D
2.25" (57mm)
E
2.38" (60mm)
F
N
No Offset
0
Standard
A
Plain Lens
L
Marriott Lens*
*Marriott lens
only for Marriott
properties
0
Standard
A
FS Housing/Thumbturn*
B
FS Housing/MT
Thumbturn*
C
FS Housing/ädƏse
Thumbturn*
D
0
0
A
A
Standard
Escape Return
B
Tamper Switch
T
Toggle (MT only)
D
Dress Ring
M
2.50" (63.5mm)
FS Housing/Utility (no
Thumbturn)*
2.87"-3.00"
(73-76mm)
*BLE not available with FS Dummy w/ Double Messenger Cap
housing. FS housing only
available with ädƏse locks
G
H
Dummy w/ Messenger Cap
N
3.03" (77mm)
J
3.35" (85mm)
K
3.90" (100mm)
ädəse only available
in ADB or Utility
for door thickness
greater than 2.00"
(51mm)
Note: * 1" Faceplate required for 1.38" (35-40mm) door size
FS housing and Dress Ring on select finishes and ädəse only
Heavy on ädəse only, satin chrome only
Messenger locks to be configured with DAJ mortise for optimal functionality
Some listed lever options are not available in all finishes
Standard
Custom Strike
B
Ocean Shipment
C
Ocean/Custom Strike
D
Ocean/Australia Strike
E
Demo Lock*
*Demo lock only available in
1-3/4" RH door
Finish
AB
Antique Brass
BB
Bright Brass
BC
Bright Chrome
BK
Black
OZ
Dark Mahogany
SC
Satin Chrome
SN
Satin Nickel
SB
Satin Brass
*Knob only available
in BB, BS, SB, SS
*AB only available
with ädƏse I/S
*Continental not
available in SN
*Only SC, BC, OZ,
and BK approved
for exterior
application
*FS options NOT
AVAILABLE in BB,
BK, OZ OR SB
75
Saflok Product Catalog / Order Guide
Saflok QuantumII RFID
Ordering
3.55"
90.1mm
3.44"
87.3mm
3.50"
88.9mm
2.37"
60.2mm
2.82"
71.6mm
8.44"
214.3mm
QuantumII RFID
Front
10.13"
257.3mm
10.27"
260.8mm
ädƏse
Inside
MT Inside
Standard Model (Example) (Continue building the model number to the right)
Model
Version
Q R
1
Locking Mechanism
Communication
1
1
N
A
Mortise
Faceplate
Primary
Secondary
Application
Lever
0
Handing
A
0
Type
Position
L
Build the model number with the desired options (Continue building the model number to the right)
Model
Version
Q
Locking Mechanism
QR
QuantumII MT
QP
QuantumII
ädƏse
Version
1
Faceplate
Locking Mechanism
Mortise
Faceplate
ASM:
1
Standard
2
ADB
3
Utility
4
Standard DAJ
5
ADB DAJ
ASM:
1
1 1/4" (32 mm)
2
1" (25 mm)
Dummy:
D
Dummy (no
faceplate)
ESM:
6
A
7
B
Utility DAJ
Utility ADB
8
Utility ADB DAJ
9
NDB
A
NDB Utility
B
NDB DAJ
C
NDB UTL DAJ
Dummy:
D
Dummy
ESM:
G
Euro
H
Euro Utility
76
Application
Lever
Handing
1
Mortise
Style
Communication
20mm
23mm
Primary
N
Communication
Primary
Secondary
No Primary
X
Primary Ready
A
Zigbee
North America
(158mW)
B
Zigbee Europe /
Asia (10mW)
C
Zigbee
International
(87mW)
D
Inncom RF
E
Crestron
F
Secondary
Telkonet
Type
Application
A
0
A
B
E
C
BLE Compatible
BLE Ready
C
BLE Enabled
D
Hilton BLE*
G
BLE Mod Bracket
H
Hilton BLE Mod
Bracket*
Dummy:
N
No Secondary (for
Dummy Only)
Hilton BLE
(only for Hilton
properties)
Interior
Exterior
H
Heavy
Type
Arc
Continental
E
Elevon
G
Gala
K
Regal Knob
P
Apogee
T
Troy
Position
Lever
0
Position
Standard
1
Vert I/S
Handing
L
Left Hand
R
Right Hand
X
Left Hand
Reverse
Y
Right Hand
Reverse
Saflok Product Catalog / Order Guide
Saflok QuantumII RFID
Ordering
3.55"
90.1mm
3.44"
87.3mm
3.50"
88.9mm
2.37"
60.2mm
2.82"
71.6mm
8.44"
214.3mm
QuantumII RFID
Front
10.13"
257.3mm
10.27"
260.8mm
ädƏse
Inside
MT Inside
Standard Model (Example) (Continued)
Door Size
Optional Adjustment
Finish
A
N
0
0
0
0
Thickness
Offset
Outside
Inside
Special Hardware/Functionality
Packout
A
B
Build the model number with the desired options (Continued)
Door Size
Finish
N
0
Offset
Outside
Inside
Special Hardware/Functionality
Packout
Door Size
Thickness
Offset
Outside
Inside
Optional Adjustment
Special Hardware/Functionality
Packout
Thickness
A
Optional Adjustment
1.75" (44mm)
B*
1.38" (35-40mm)
C
2.00" (51mm)
D
2.25" (57mm)
E
2.38" (60mm)
F
2.50" (63.5mm)
G
2.87"-3.00"
(73-76mm)
H
3.03" (77mm)
J
3.35" (85mm)
N
No Offset
0
Standard
0
Standard
A
FS Housing/Thumbturn*
B
FS Housing/
MT Thumbturn*
C
FS Housing/ädƏse
Thumbturn*
D
FS Housing/(No
Thumbturn)*
F
FS Thumbturn
0
0
A
A
Standard
Escape Return
B
Tamper Switch
T
Toggle (MT only)
D
Dress Ring
M
Dummy w/ Messenger Cap
N
Dummy w/ Double Messenger Cap
*BLE not available with FS
housing. FS housing only
available with ädƏse locks
K
3.90" (100mm)
ädəse only available
in ADB or Utility
for door thickness
greater than 2.00"
(51mm)
Standard
Custom Strike
B
Ocean Shipment
C
Ocean/Custom Strike
D
Ocean/Australia Strike
E
Demo Lock*
*Demo lock only available in
1-3/4" RH door
Finish
AB
Antique Brass
BB
Bright Brass
BC
Bright Chrome
BK
Black
OZ
Dark Mahogany
SC
Satin Chrome
SN
Satin Nickel
SB
Satin Brass
*Knob only available
in BB, BS, SB, SS
*AB only available
with ädƏse I/S
*Continental not
available in SN
*Only SC, BC, OZ,
and BK approved
for exterior
application
*FS options Not
available in BB, BK,
OZ OR SB
Note: * 1" Faceplate required for 1.38" (35-40mm) door size
FS housing and Dress Ring on select finishes and ädəse only
Heavy on ädəse only, satin chrome only
Messenger locks to be configured with DAJ mortise for optimal functionality
Some listed lever options are not available in all finishes
77
Saflok Product Catalog / Order Guide
Saflok QuantumIII RFID
Ordering
3.44"
87.3mm
3.55"
90.1mm
3.50"
88.9mm
2.37"
60.2mm
2.82"
71.6mm
8.44"
214.3mm
QuantumIII RFID
Front
10.13"
257.3mm
10.27"
260.8mm
ädƏse
Inside
MT Inside
Standard Model (Example) (Continue building the model number to the right)
Model
Version
Q T
1
Locking Mechanism
Communication
1
1
N
A
Mortise
Faceplate
Primary
Secondary
Application
Lever
0
Handing
A
0
Type
Position
L
Build the model number with the desired options (Continue building the model number to the right)
Model
Version
Q
Locking Mechanism
QT
QuantumIII
MT
QU
QuantumIII
ädƏse
Version
1
Faceplate
Locking Mechanism
Mortise
Faceplate
ASM:
1
Standard
2
ADB
3
Utility
4
Standard DAJ
5
ADB DAJ
ASM:
1
1 1/4" (32 mm)
2
1" (25 mm)
Dummy:
D
Dummy (no
faceplate)
ESM:
6
A
7
B
Utility DAJ
Utility ADB
8
Utility ADB DAJ
9
NDB
A
NDB Utility
B
NDB DAJ
C
NDB UTL DAJ
Dummy:
D
Dummy
ESM:
G
Euro
H
Euro Utility
78
Application
Lever
Handing
1
Mortise
Style
Communication
20mm
23mm
Primary
N
Communication
Primary
Secondary
No Primary
X
Primary Ready
A
Zigbee
North America
(158mW)
B
Zigbee Europe /
Asia (10mW)
C
Zigbee
International
(87mW)
D
Inncom RF
E
Crestron
F
Secondary
Telkonet
Type
Application
A
0
A
B
E
C
BLE Compatible
BLE Ready
C
BLE Enabled
D
Hilton BLE*
G
BLE Mod Bracket
H
Hilton BLE Mod
Bracket*
Dummy:
N
No Secondary (for
Dummy Only)
Hilton BLE
(only for Hilton
properties)
Interior
Exterior
H
Heavy
Type
Arc
Continental
E
Elevon
G
Gala
K
Regal Knob
P
Apogee
T
Troy
Position
Lever
0
Position
Standard
1
Vert I/S
Handing
L
Left Hand
R
Right Hand
X
Left Hand
Reverse
Y
Right Hand
Reverse
Saflok Product Catalog / Order Guide
Saflok QuantumIII RFID
Ordering
3.44"
87.3mm
3.55"
90.1mm
3.50"
88.9mm
2.37"
60.2mm
2.82"
71.6mm
8.44"
214.3mm
QuantumIII RFID
Front
10.13"
257.3mm
10.27"
260.8mm
ädƏse
Inside
MT Inside
Standard Model (Example) (Continued)
Door Size
Optional Adjustment
Finish
A
N
0
0
0
0
Thickness
Offset
Outside
Inside
Special Hardware/Functionality
Packout
A
B
Build the model number with the desired options (Continued)
Door Size
Finish
N
0
Offset
Outside
Inside
Special Hardware/Functionality
Packout
Door Size
Thickness
Offset
Outside
Inside
Optional Adjustment
Special Hardware/Functionality
Packout
Thickness
A
Optional Adjustment
1.75" (44mm)
B*
1.38" (35-40mm)
C
2.00" (51mm)
D
2.25" (57mm)
E
2.38" (60mm)
F
2.50" (63.5mm)
G
2.87"-3.00"
(73-76mm)
H
3.03" (77mm)
J
3.35" (85mm)
N
No Offset
0
Standard
0
Standard
A
FS Housing/Thumbturn*
B
FS Housing/MT
Thumbturn*
C
FS Housing/ädƏse
Thumbturn*
D
FS Housing/Utility (Turn
Piece Plug)
F
FS Thumbturn*
0
0
A
A
Standard
Escape Return
B
Tamper Switch
T
Toggle (MT only)
D
Dress Ring
M
Dummy w/ Messenger Cap
N
Dummy w/ Double Messenger Cap
*BLE not available with FS
housing. FS housing only
available with ädƏse locks
K
3.90" (100mm)
ädəse only available
in ADB or Utility
for door thickness
greater than 2.00"
(51mm)
Standard
Custom Strike
B
Ocean Shipment
C
Ocean/Custom Strike
D
Ocean/Australia Strike
E
Demo Lock*
*Demo lock only available in
1-3/4" RH door
Finish
AB
Antique Brass
BB
Bright Brass
BC
Bright Chrome
BK
Black
OZ
Dark Mahogany
SC
Satin Chrome
SN
Satin Nickel
SB
Satin Brass
*Knob only available
in BB, BS, SB, SS
*AB only available
with ädƏse I/S
*FS option not
available in BB, BK,
OZ, or SB
*Continental not
available in SN
*Only SC, BC, OZ,
and BK approved
for exterior
application
Note: * 1" Faceplate required for 1.38" (35-40mm) door size
FS housing and Dress Ring on select finishes and ädəse only
Heavy on ädəse only, satin chrome only
Messenger locks to be configured with DAJ mortise for optimal functionality
Some listed lever options are not available in all finishes
79
Saflok Product Catalog / Order Guide
Saflok QuantumII Mechanical Key Override (MKO)
Ordering
3.44"
87.3mm
3.55"
90.1mm
3.50"
88.9mm
1.60"
40.6mm
Optional
Key
Override
2.37"
60.2mm
8.44"
214.3mm
2.82"
71.6mm
QuantumII Front
10.13"
257.3mm
10.27"
260.8mm
ädƏse Inside
MT Inside
Standard Model (Example) (Continue building the model number to the right)
Model
Version
Q R
1
Locking Mechanism
Communication
M
1
N
A
Mortise
Faceplate/Cylinder
Primary
Secondary
Application
Lever
0
Handing
A
0
Type
Position
L
Build the model number with the desired options (Continue building the model number to the right)
Model
Version
Q
Locking Mechanism
QR
QuantumII MT
QP
QuantumII
ädƏse
Version
1
M
Faceplate/Cylinder
Locking Mechanism
Mortise Faceplate/Cylinder
MKO
N
MKO Utility
1
1 1/4" (32mm)
No Cylinder
3
P
MKO NDB
1 1/4" (32mm)
Non SFIC Keyed
Differently
R
5
MKO NDB
Utility
1 1/4" (32mm) Non
SFIC Keyed Alike
7**
1 1/4" (32mm) SFIC
2
N
Lever
Primary Ready
A
Zigbee
North America
(158mW)
B
Zigbee Europe /
Asia (10mW)
C
Zigbee
International
(87mW)
4
E
Secondary
Communication
Primary
Secondary
X
D
6
Primary
No Primary
1" (25mm) No
Cylinder
1" (25mm) Non SFIC
Keyed Differently
Inncom RF
Crestron
F
Telkonet
1" (25mm) Non SFIC
Keyed Alike
8**
1" (25mm) SFIC
Note: **SFIC does not include core" on 1 1/4" and 1" SFIC option
80
Application
Handing
1
Mortise
Style
Communication
Type
Application
A
0
A
B
E
C
BLE Compatible
BLE Ready
D
Hilton BLE*
G
BLE Mod Bracket
H
Hilton BLE Mod
Bracket*
*Hilton BLE
(only for Hilton
properties)
Interior
Exterior
Type
Arc
Continental
E
Elevon
G
Gala
K
Regal Knob
P
Apogee
T
Troy
Position
Lever
0
Position
Standard
1
Vert I/S
Handing
L
Left Hand
R
Right Hand
X
Left Hand
Reverse
Y
Right Hand
Reverse
Saflok Product Catalog / Order Guide
Saflok QuantumII Mechanical Key Override (MKO)
Ordering
3.44"
87.3mm
3.55"
90.1mm
3.50"
88.9mm
1.60"
40.6mm
Optional
Key
Override
2.37"
60.2mm
8.44"
214.3mm
2.82"
71.6mm
QuantumII Front
10.13"
257.3mm
10.27"
260.8mm
ädƏse Inside
MT Inside
Standard Model (Example) (Continued)
Door Size
Optional Adjustment
Finish
A
N
0
0
0
0
Thickness
Offset
Outside
Inside
Special Hardware/Functionality
Packout
B
B
Build the model number with the desired options (Continued)
Door Size
Finish
N
0
Offset
Outside
Inside
Special Hardware/Functionality
Packout
Door Size
Thickness
Offset
Outside
Inside
Optional Adjustment
Special Hardware/Functionality
Packout
Thickness
A
Optional Adjustment
1.75" (44mm)
B*
1.38" (35-40mm)
C
2.00" (51mm)
D
2.25" (57mm)
E
2.38" (60mm)
F
2.50" (63.5mm)
G
2.87"-3.00"
(73-76mm)
H
3.03" (77mm)
J
3.35" (85mm)
N
No Offset
0
Standard
0
0
0
A
A
A
Standard
FS Housing/Thumbturn*
B
FS Housing/
MT Thumbturn*
C
FS Housing/ädƏse
Thumbturn*
D
FS Housing/(No
thumbturn)*
F
FS Thumbturn
*BLE not available with FS
housing. FS housing only
available with ädƏse locks
K
3.90" (100mm)
ädəse only available
in ADB or Utility
for door thickness
greater than 2.00"
(51mm)
Standard
Escape Return
B
Tamper Switch
T
Toggle (MT Only)
D
Dress Ring
Standard
Custom Strike
B
Ocean Shipment
C
Ocean/Custom Strike
D
Ocean/Australia Strike
E
Demo Lock*
*Demo Lock only available
in 1-3/4" RH door
Demo only with KD cylinder
Finish
BB
Bright Brass
BC
Bright Chrome
BK
Black
OZ
Dark Mahogany
SC
Satin Chrome
SN
Satin Nickel
SB
Satin Brass
*Knob only available
in BB, BS, SB, SS
*AB only available
with ädƏse I/S
*FS option not
available in BB, BK,
OZ, or SB
*Continental not
available in SN
*Only SC, BC, OZ,
and BK approved
for exterior
application
Note: * 1" Faceplate required for 1.38" (35-40mm) door size
FS housing and Dress Ring on select finishes and ädəse only
Heavy on ädəse only, satin chrome only
Some listed lever options are not available in all finishes
81
Saflok Product Catalog / Order Guide
Saflok QuantumIII Mechanical Key Override (MKO)
Ordering
3.44"
87.3mm
3.55"
90.1mm
3.50"
88.9mm
1.60"
40.6mm
Optional
Key
Override
2.37"
60.2mm
8.44"
214.3mm
2.82"
71.6mm
QuantumIII Front
10.13"
257.3mm
10.27"
260.8mm
ädƏse Inside
MT Inside
Standard Model (Example) (Continue building the model number to the right)
Model
Version
Q T
1
Locking Mechanism
Communication
M
1
N
A
Mortise
Faceplate/Cylinder
Primary
Secondary
Application
Lever
0
Handing
A
0
Type
Position
L
Build the model number with the desired options (Continue building the model number to the right)
Model
Version
Q
Locking Mechanism
QT
QuantumIII
MT
QU
QuantumIII
ädƏse
Version
1
M
Faceplate/Cylinder
Locking Mechanism
Mortise Faceplate/Cylinder
MKO
N
MKO Utility
1
1 1/4" (32mm)
No Cylinder
3
P
MKO NDB
1 1/4" (32mm)
Non SFIC Keyed
Differently
R
5
MKO NDB
Utility
1 1/4" (32mm) Non
SFIC Keyed Alike
7**
1 1/4" (32mm) SFIC
2
N
Lever
Primary Ready
A
Zigbee
North America
(158mW)
B
Zigbee Europe /
Asia (10mW)
C
Zigbee
International
(87mW)
4
E
Secondary
Communication
Primary
Secondary
X
D
6
Primary
No Primary
1" (25mm) No
Cylinder
1" (25mm) Non SFIC
Keyed Differently
Inncom RF
Crestron
F
Telkonet
1" (25mm) Non SFIC
Keyed Alike
8**
1" (25mm) SFIC
Note: **SFIC does not include core" on 1 1/4" and 1" SFIC option
82
Application
Handing
1
Mortise
Style
Communication
Type
Application
A
0
A
B
E
C
BLE Compatible
BLE Ready
D
Hilton BLE*
G
BLE Mod Bracket
H
Hilton BLE Mod
Bracket*
Hilton BLE
(only for Hilton
properties)
Interior
Exterior
Type
Arc
Continental
E
Elevon
G
Gala
K
Regal Knob
P
Apogee
T
Troy
Position
Lever
0
Position
Standard
1
Vert I/S
Handing
L
Left Hand
R
Right Hand
X
Left Hand
Reverse
Y
Right Hand
Reverse
Saflok Product Catalog / Order Guide
Saflok QuantumIII Mechanical Key Override (MKO)
Ordering
3.44"
87.3mm
3.55"
90.1mm
3.50"
88.9mm
1.60"
40.6mm
Optional
Key
Override
2.37"
60.2mm
8.44"
214.3mm
2.82"
71.6mm
QuantumIII Front
10.13"
257.3mm
10.27"
260.8mm
ädƏse Inside
MT Inside
Standard Model (Example) (Continued)
Door Size
Optional Adjustment
Finish
A
N
0
0
0
0
Thickness
Offset
Outside
Inside
Special Hardware/Functionality
Packout
B
B
Build the model number with the desired options (Continued)
Door Size
Finish
N
0
Offset
Outside
Inside
Special Hardware/Functionality
Packout
Door Size
Thickness
Offset
Outside
Inside
Optional Adjustment
Special Hardware/Functionality
Packout
Thickness
A
Optional Adjustment
1.75" (44mm)
B*
1.38" (35-40mm)
C
2.00" (51mm)
D
2.25" (57mm)
E
2.38" (60mm)
F
N
No Offset
0
Standard
0
Standard
A
FS Housing/Thumbturn
B
C
FS Housing/ädƏse
Thumbturn
D
2.50" (63.5mm)
2.87"-3.00"
(73-76mm)
*BLE not available with FS
housing. FS housing only
available with ädƏse locks
H
0
A
A
Standard
Escape Return
B
FS Housing/MT Thumbturn Tamper Switch
FS Housing/Utility (No
Thumbturn)*
G
0
3.03" (77mm)
J
3.35" (85mm)
K
3.90" (100mm)
ädəse only available
in ADB or Utility
for door thickness
greater than 2.00"
(51mm)
Note: * 1" Faceplate required for 1.38" (35-40mm) door size
FS housing and Dress Ring on select finishes and ädəse only
Heavy on ädəse only, satin chrome only
Some listed lever options are not available in all finishes
T
Toggle (MT Only)
D
Dress Ring
Standard
Custom Strike
B
Ocean Shipment
C
Ocean/Custom Strike
D
Ocean/Australia Strike
E
Demo Lock*
*Demo Lock only available
in 1-3/4" RH door
Demo only with KD cylinder
Finish
AB
Antique Brass
BB
Bright Brass
BC
Bright Chrome
BK
Black
OZ
Dark Mahogany
SC
Satin Chrome
SN
Satin Nickel
SB
Satin Brass
*Knob only available
in BB, BS, SB, SS
*AB only available
with ädƏse I/S
*FS option not
available in BB, BK,
OZ, or SB
*Continental not
available in SN
*Only SC, BC, OZ,
and BK approved
for exterior
application
83
Saflok Product Catalog / Order Guide
84
Saflok Product Catalog / Order Guide
Saflok QuantumIV
Overview
The Saflok QuantumIV electronic lock offers dormakaba’s unique award winning
two-piece modular design with an RFID reader for a sleek and elegant appearance
combined with superior lock performance. The lock accepts Mifare Plus credentials for
enhanced functionality, and works with dormakaba access management software.
Mobile Access
This Bluetooth Low Energy (BLE) capable lock can operate using the dormakaba
Mobile Access Solutions, allowing guests to use their mobile device as their hotel room
key.
Applications
• Suitable for small to very large scale hotels
• Easily replaces existing mechanical or electronic door locks throughout a facility
• Access control for guest rooms, common areas as well as back-of-house
Security Features
• High security and tamper-proof design
• 1" solid deadbolt (optional auto deadbolt)
• Staff monitoring - RFID Keycard audits
• Tracking mortise for door ajar reporting (ädəse standard, MT optional)
• Emergency access: emergency key, mechanical key and electronic override
Low Maintenance
• Batteries last up to 2 years
• Low battery indicator alerts staff
• Lock programming and audit records are not erased during battery replacement
• Operates with a completely sealed contactless reader
Access control management software
The QuantumIV lock is supported by dormakaba’s robust access management software solution that features an array
of access control workflows for both guest and staff access. Optionally, choose dormakaba’s online access management
solution for superior control and monitoring.
85
Saflok Product Catalog / Order Guide
Saflok QuantumIV RFID
Ordering
3.44"
87.3mm
3.55"
90.1mm
3.50"
88.9mm
2.37"
60.2mm
2.82"
71.6mm
8.44"
214.3mm
QuantumIV RFID
Front
10.13"
257.3mm
10.27"
260.8mm
ädƏse
Inside
MT Inside
Standard Model (Example) (Continue building the model number to the right)
Model
Version
Q
Locking Mechanism
1
Communication
1
1
N
A
Mortise
Faceplate
Primary
Secondary
Application
Lever
0
Handing
A
0
Type
Position
L
Build the model number with the desired options (Continue building the model number to the right)
Model
Version
Q
Locking Mechanism
QF
QuantumIV
MT
QG
QuantumIV
ädƏse
Version
1
Faceplate
Locking Mechanism
Mortise
Faceplate
ASM:
1
Standard
2
ADB
3
Utility
4
Standard DAJ
5
ADB DAJ
ASM:
1
1 1/4" (32 mm)
2
1" (25 mm)
Dummy:
D
Dummy (no
faceplate)
ESM:
6
A
7
B
Utility DAJ
Utility ADB
8
Utility ADB DAJ
9
NDB
A
NDB Utility
B
NDB DAJ
C
NDB UTL DAJ
Dummy:
D
Dummy
ESM:
G
Euro
H
Euro Utility
86
Application
Lever
Handing
1
Mortise
Style
Communication
20mm
23mm
Primary
N
Communication
Primary
Secondary
No Primary
X
Primary Ready
A
Zigbee
North America
(158mW)
B
Zigbee Europe /
Asia (10mW)
C
Zigbee
International
(87mW)
D
Inncom RF
E
Crestron
F
Secondary
Telkonet
Type
Application
A
0
A
B
E
C
BLE Compatible
BLE Ready
C
BLE Enabled
D
Hilton BLE*
G
BLE Mod Bracket
H
Hilton BLE Mod
Bracket
Dummy:
N
No Secondary (for
Dummy Only)
Hilton BLE
(only for Hilton
properties)
Interior
Exterior
H
Heavy
Type
Arc
Continental
E
Elevon
G
Gala
K
Regal Knob
P
Apogee
T
Troy
Position
Lever
0
Position
Standard
1
Vert I/S
Handing
L
Left Hand
R
Right Hand
X
Left Hand
Reverse
Y
Right Hand
Reverse
Saflok Product Catalog / Order Guide
Saflok QuantumIV RFID
Ordering
3.44"
87.3mm
3.55"
90.1mm
3.50"
88.9mm
2.37"
60.2mm
2.82"
71.6mm
8.44"
214.3mm
QuantumIV RFID
Front
10.13"
257.3mm
10.27"
260.8mm
ädƏse
Inside
MT Inside
Standard Model (Example) (Continued)
Door Size
Optional Adjustment
Finish
A
N
0
0
0
0
Thickness
Offset
Outside
Inside
Special Hardware/Functionality
Packout
A
B
Build the model number with the desired options (Continued)
Door Size
Finish
N
0
Offset
Outside
Inside
Special Hardware/Functionality
Packout
Door Size
Thickness
Offset
Outside
Inside
Optional Adjustment
Special Hardware/Functionality
Packout
Thickness
A
Optional Adjustment
1.75" (44mm)
B*
1.38" (35-40mm)
C
2.00" (51mm)
D
2.25" (57mm)
E
2.38" (60mm)
F
2.50" (63.5mm)
G
2.87"-3.00"
(73-76mm)
H
3.03" (77mm)
J
3.35" (85mm)
N
No Offset
0
Standard
0
Standard
A
FS Housing/Thumbturn*
B
FS Housing/MT
Thumbturn*
C
FS Housing/ädƏse
Thumbturn*
D
FS Housing/Utility (No
Thumbturn)*
F
FS Thumbturn
0
0
A
A
Standard
Escape Return
B
Tamper Switch
T
Toggle (MT only)
D
Dress Ring
M
Dummy w/ Messenger Cap
N
Dummy w/ Double Messenger Cap
*BLE not available with FS
housing. FS housing only
available with ädƏse locks
K
3.90" (100mm)
ädəse only available
in ADB or Utility
for door thickness
greater than 2.00"
(51mm)
Standard
Custom Strike
B
Ocean Shipment
C
Ocean/Custom Strike
D
Ocean/Australia Strike
E
Demo Lock*
Finish
AB
Antique Brass
BB
Bright Brass
BC
Bright Chrome
BK
Black
OZ
Dark Mahogany
SC
Satin Chrome
SN
*Demo lock only available in Satin Nickel
1-3/4" RH door
SB
Satin Brass
*Knob only available
in BB, BS, SB, SS
*AB only available
with ädƏse I/S
*FS option not
available in BB, BK,
OZ, or SB
*Continental not
available in SN
*Only SC, BC, OZ,
and BK approved
for exterior
application
Note: * 1" Faceplate required for 1.38" (35-40mm) door size
FS housing and Dress Ring on select finishes and ädəse only
Heavy on ädəse only, satin chrome only
Messenger locks to be configured with DAJ mortise for optimal functionality
Some listed lever options are not available in all finishes
87
Saflok Product Catalog / Order Guide
Saflok Quantum Pixel
Overview
Overview
Saflok Quantum Pixel is the newest addition to dormakaba’s award-winning Quantum
Series of RFID electronic locks. The Quantum Pixel provides an easy-to-use, secure,
and flexible solution that is both visually attractive and high-performing. With its
electronics concealed within the door, the Quantum Pixel’s visible hardware is minimal
resulting in a lock design that integrates seamlessly with any hotel decor.
Mobile Access
The Quantum Pixel is equipped with Bluetooth Low Energy Technology, meaning that
the lock is able to operate using the dormakaba Mobile Access Solutions. Guests can
safely use their mobile device to access any door in the hotel equipped with Quantum
Pixel.
Applications
• Ideal for new construction projects or when doors are being replaced
• Suitable for small to very large scale hotels
• Access control for guest rooms
Security Features
• 1” solid deadbolt
• Staff monitoring – RFID keycard audits
• Tracking mortise for door ajar reporting
• Emergency access: emergency key and electronic override
• Tamper Resistant
Low Maintenance
• Batteries last up to 2 years
• Low battery indicator alerts staff
• Lock programming and audit records are not erased during battery replacement
• Service tray for easy battery access
Access Control Management Software
The Quantum Pixel lock is supported by dormakaba’s robust access management software solution that features
an array of access control workflows for both guest and staff access. Optionally, choose dormakaba’s online access
management solution for superior control and monitoring.
88
Saflok Product Catalog / Order Guide
Mechanical Features
Description
Electronic mortise lockset with 1" (25.4mm) throw deadbolt and 5/8" (15.9mm) dead-locking latch bolt
Reader cover
Polycarbonate. Color: black
Handing
Factory-handed mortise (left, right, left reverse, right reverse)
ADA Compliant. Standard levers available
Lever
Apogee
Arc
Continental
Elevon
Deadbolt
1" (25.4mm) throw deadbolt and 5/8" (15.9mm) dead-locking latch bolt
Door Thickness
1.75” to 3”. No mortise offset, no rabbeted doors
Standard Finishes
(levers and inside)
Bright chrome, bright brass, satin chrome, satin brass
Locking Options
ANSI lock case with lock front mortise
Online
Configurations
Gala
Troy
Messenger LENS Ready
DAJ mortise (ANSI lock case)
Messenger LENS Online
Lock controller board with Messenger LENS capability (wood doors only)
DAJ mortise (ANSI lock case)
Mobile Access Option (BLE)
BLE ready
BLE enabled
Upgradeable to BLE with BLE module
BLE module included, no further upgrades needed
Batteries
Alkaline Four AA battery pack
Battery life is up to 2 years
Low battery indicator: alerts staff that batteries need to be changed soon
Lock Operation
Date/Time Stamp
Real-time; date and hours/minutes
Interrogation
Obtain key usage reports from the lock by using a handheld unit at the door, or increase efficiency by performing a remote
Interrogation using Messenger LENS (optional)
Preregistered Keycards Keys can be made up to ten days in advance without canceling current or arriving guests
Keycard Expiration
Configurable expiration dates; can be automatically set for check out date or manually applied when making key during check in
process.
Passage Mode
Set by authorized keycard or Messenger LENS system. Can also be configured to perform an automated/pre-defined passage mode
time.
Lockout Mode
Set by authorized keycard or Messenger LENS system
RFID Credentials
Specifications
Two credential format options available: Mifare Classic or Mifare Plus
- Mifare Classic (4byte NUID): Guest Keycards (Mini), Staff (4K & 1K)
- Mifare Plus: Guest Keycards (Mifare Ultralight C, 7 Byte UID), Staff Keycards (Mifare Plus S 2K, 4 Byte NUID, Mifare Plus S
4K, 4 Byte NUID)
Feedback
Light indicators in reader
Diagnostics
Light indicators and handheld display
Audit Trail
Up to 4,000 events
Disability Feature
RCU readers required to interface with automatic power operated doors for special openings
Privacy Override
Emergency keycards
Certifications & Testing
Accessibility Standard ADA compliant levers (Code of Federal Regulations 28 CFR Part 36 – 1994 "ADA Standards for Accessible Design”)
BHMA/ANSI
Grade One performance tests for “ANSI/BHMA A156.13 - 2017 "American National Standard for Mortise Locks and
Latches," and “ANSI/BHMA A156.25 - 2013 "American National Standard for Electrified Locking Devices." (Only locks tested
and approved by non-biased third-party test lab are allowed in the “BHMA Certified Products Directory” found at www.
buildershardware.com)
Fire Rating
U.L. Listing: GYQS.R11247 “Electrically Controlled Single-point Locks and Latches.” Evaluated in accordance with UL 10B and
UL 10C. Listed for up to 3 hours on metal doors and up to 45 min on wood doors
Electronics
FCC Part 15 Class A and CE 2014/53/EU compliant
Environmental
Operating Conditions
Indoor side: 32°F to 151°F (0°C to 66°C)
0% to 85% non-condensing humidity at 86°F (30°C)
IP rating: IP54
Warranty
Standard Warranty
Two years
Support Programs
dormakaba Service Plans (Platinum, Gold, Silver)
89
Saflok Product Catalog / Order Guide
Saflok Quantum Pixel
Ordering
1.61"
40.9mm
1.56"
39.6mm
2.84"
72.1mm
9.19"
7"
233.5mm 177.8mm
2.45"
62.2mm
Pixel Front
Pixel Inside
2.83"
72mm
Standard Model (Example) (Continue building the model number to the right)
Model
Version
K P
1
Locking Mechanism
Communication
4
2
X
B
Mortise
Faceplate
Primary
Secondary
Application
Lever
0
Handing
A
0
Type
Position
L
Build the model number with the desired options (Continue building the model number to the right)
Model
Version
K P
1
Locking Mechanism
Mortise
Style
KP
Quantum Pixel
Version
1
Faceplate
Locking Mechanism
Mortise
Faceplate
ASM:
ASM:
4
2
6
Dummy:
Standard DAJ
Utility DAJ
Dummy:
D
Dummy
Communication
1" Faceplate
D
Dummy (No
Faceplate)
Primary
X
A
Zigbee
North America
(158mW)
B
Europe / Asia
(10mW)
C
International
(87mW)
D
Inncom RF
B
BLE Ready
C
Kaba BLE Enabled
D
Hilton BLE*
Type
Application
0
Wood Interior
A
Arc
C
Continental
E
Elevon
Dummy:
G
No Secondary
K
N
Hilton BLE
(only for Hilton
properties)
Type
Gala
Regal Knob
P
Apogee
T
E
Troy
F
No Lever Set
Crestron
Telkonet
90
Lever
Secondary
Communication
Primary
Secondary
Primary Ready
Application
N
Handing
Position
Lever
0
Position
Standard
N
No Lever Set
Handing
L
Left Hand
R
Right Hand
X
Left Hand
Reverse
Y
Right Hand
Reverse
Saflok Product Catalog / Order Guide
Saflok Quantum Pixel
Ordering
1.61"
40.9mm
1.56"
39.6mm
2.84"
72.1mm
9.19"
7"
233.5mm 177.8mm
2.45"
62.2mm
Pixel Front
Pixel Inside
2.83"
72mm
Standard Model (Example) (Continued)
Door Size
Optional Adjustment
Finish
A
N
0
0
0
0
Thickness
Offset
Outside
Inside
Special Hardware/Functionality
Packout
B
B
Build the model number with the desired options (Continued)
Door Size
Finish
N
0
Offset
Outside
Inside
Special Hardware/Functionality
Packout
Door Size
Thickness
Offset
Outside
Inside
Optional Adjustment
Special Hardware/Functionality
Packout
Thickness
A
Optional Adjustment
1.75" (44mm)
B
1.38" (35-40mm)
C
N
No Offset
0
Standard
0
0
Standard
N
No Thumbturn
2.00" (51mm)
D
2.25" (57mm)
E
2.38" (60mm)
F
2.50" (63.5mm)
G
2.87"-3.00"
(73-76mm)
H
3.03" (77mm)
J
3.35" (85mm)
0
Standard
0
Standard
A
Custom Strike
B
Ocean Shipment
C
Ocean/Custom Strike
E
Demo Lock*
*Demo lock only available in
1-3/4" RH door
Finish
BB
Bright Brass
BC
Bright Chrome
BK
Black
OZ
Dark Mahogany
SC
Satin Chrome
SB
Satin Brass
SN
Satin Nickel
*Thumbturn not
available in OZ or
BK finish
*Knob only
available in BB, BS,
SB, SS, OZ, or SB
*Continental not
available in SN
Note: Some listed lever options not available in all finishes
Offset and rabbeted doors not supported
91
Saflok Product Catalog / Order Guide
Perimeter Access
92
Saflok Product Catalog / Order Guide
Saflok SRTM Series RFID
Overview
The Saflok SR Series reader is a device that operates access control
throughout the property from guestroom to perimeter access such as
elevator, parking entrances, or any other door requiring an electric strike
or electro-magnetic lock. Offering a sleek minimalist design that will suit
any property décor, the SR Series functions with the Windows-based
Saflok System 6000 and the online wireless system, Saflok Messenger
LENS. The device is available in three different models to suit any
property’s needs.
Perimeter access applications:
• S
R1: the reader is installed on a surface mount or on an aluminum
door frame.
• SR2: the reader is installed using a flush mount wall plate, available in
various finishes
Guestroom applications:
• SR3: the reader is installed behind a third party decorative wall plate
SR2
SR1
Applications:
The SR1 and SR2 models are ideal for perimeter access points (elevator, parking entrance, outdoor swimming pool) and
locking devices (electric strike, magnetic lock)
Features:
• Improved tamper resistance
• Ability to easily integrate into any System 6000TM design
• Environmentally sealed contactless smart card reader protects against climate extremes, which is an especially vital
feature for common access readers placed in external building and exit device applications
• Compatible with Messenger LENS
• Optionally equipped with the MessengerTM transceiver for centralized access control
• LED lights displayed behind acrylic reader lens
• Contactless smart card reader uses industry-standard
• Contactless smart card reader leverages Mifare Classic or Mifare Plus credentials
• Programmable auto latch/unlatch feature eliminates need for manual dogging
• Auditable entries/attempts
• Selectable master key access
• Restricts access to guest keys after check-out date
• BLE options (soon available)
Reader and Controller Box Dimensions:
• Single Metal Gang Box: 3.03”H x 3.51” D x 1.97” W (76.96 H x 89.15 D x 50 W mm)
• Metal Controller Box: 3”H x 3.5”D x 3.77” W (76.2 H x 89 D x 95.76 W mm)
• Plastic Controller Box: 4-1/8”H x 2-29/32” D x 4-5/32” W (104.78 H x 73.82 D x 105.57 W mm)
Reader Dimensions and Weight:
•
•
•
•
Contactless Reader (Surface Mount):
1.81” W x 2.81” H x 1” D (46 W x 71 H x 25 D mm), 0.1 lbs (0.05 kg)
Contactless Reader (Flush Mount):
1.75” W x 2.75” H x .81” D (44W x 70 H x 21 D mm), 0.2 lbs (0.10 kg)
Specifications:
• Voltage: 12-24 VAC or VDC
• SPDT [email protected] relay with common, normally open and normally closed contacts
93
Saflok Product Catalog / Order Guide
Saflok SR3 for Guestrooms
Overview
The Saflok SR3 model is a lock kit that provides flexibility to properties seeking an
elegant, unique design for guestrooms. This solution allows designers to install the SR
Series RFID reader behind a third party wall plate, while fitting customized lever sets
and privacy thumb turn hardware on the door. The SR3 solution provides a minimalistic
solution without requiring a full bodied lock or RFID reader on the door.
Options:
Properties opting not to use a third party plate, are offered the flexibility to get the
SR1 or SR2 readers visible on the wall.
Applications:
The SR3 is ideal for guestroom solutions and new construction projects.
Features:
•
•
•
•
•
•
94
Contactless smart card reader leverages Mifare Classic or Mifare Plus credentials
1" solid deadbolt (optional auto deadbolt)
High security and tamperproof design
Staff monitoring - Keycard audits
Tracking mortise for door ajar reporting
Compatible with Messenger LENS
SR3
Saflok Product Catalog / Order Guide
Saflok SRTM Series RFID
Overview
Locking Mechanical Features
Description
Electronic mortise lockset with 1" (25.4mm) throw deadbolt and 5/8" (15.9mm) dead-locking latch bolt
Handing
Factory-handed mortise (left, right, left reverse, right reverse)
Lever
A large selection of dormakaba custom levers available
Door Thickness
1 ¾" (44.5mm) to 2 ⅛" (53.98mm) for standard product
Standard Finishes
Flush mount (SR2 Concierge): Satin Chrome, Satin Brass, Dark Mahogany, Black, Bright Chrome, Bright Brass,
Brown, Ivory, White
Standard Backset
2 ¾" (69.9mm) from door edge to lever
Locking Options
ANSI lock case with 1 ½” or 1” lock front mortise Option: Standard Door Ajar
Online
Configurations
Messenger Ready DAJ mortise (ANSI lock case)
Messenger Online Lock controller board with Messenger capability - DAJ mortise (ANSI lock case)
Reader Operation
Date/Time Stamp
Real-time; date and hours/minutes
Interrogation
Obtain key usage reports from the lock by using a handheld unit at the door, or increase efficiency by performing a
remote Interrogation using Messenger (optional)
Pre-registered
Keycards
Keys can be made up to ten days in advance without cancelling current or arriving guests
Keycard Expiration
Configurable expiration dates; can be automatically set for check out date or manually applied when making key
during check in process.
Lockout Mode
Set by authorized keycard or Messenger system
Keycards Accepted
Mifare Classic (4 byte NUID, Mifare Plus and Mifare Ultralight C keycards)
Feedback
Light indicators in reader
Diagnostics
Light indicators and handheld display
Audit Trail
Up to 4,000 events)
Disability Feature
RCU readers interface with automatic power operated doors for special openings
Privacy Override
Emergency keycards
Specifications
Voltage: 12-24 VAC or VDC
SPDT [email protected] relay with common, normally open and normally closed contacts
Certifications & Testing
Accessibility
Standard
ADA compliant levers (Code of Federal Regulations 28 CFR Part 36 – 1994 "ADA Standards for Accessible
Design”)
Reader
Certified to the UL294 standard - Certified to the CSA 22.2 No.205 standard - Interfaces with fire panels meeting
NFPA fire access alarm standard - Meets FCC and CE requirements
Electronics
FCC Part 15 Class A and CE directive 2014/53/EU compliant
Environmental
Operating
Conditions
Indoor side: 32°F to 151°F (0°C to 66°C)
Outdoor side: -31°F to 151°F (-35°C to 66°C)
0% to 85% non-condensing humidity at 86°F (30°C)
Warranty
Standard Factory
Warranty
Two years
Extended Warranty dormakaba Service Plans (Platinum, Gold, Silver)
95
Saflok Product Catalog / Order Guide
Saflok SR Series RFID (Guestrooms)
Ordering
2.81"
71.37mm
4.5"
114.3mm
2.75"
69.85mm
1"
25.4mm
1.81"
45.97mm
1.75"
44.45mm
2.75"
69.85mm
Surface Mount SR1
.81"
20.57mm
Flush Mount SR2
SR3
Standard Model (Example)
Style
Version Reader Type SR Controller
SRC
1
1
Communication
1
N
Primary
Handing
N
L
Door
Faceplate
A
1
Thickness
Secondary
Custom Options
0
0
Reader
PCB
Finish
1
SC
SC
Hardware Controller Reader
Build the model number with the desired options
Style
Version Reader Type SR Controller
SRC
Communication
1
Version Reader Type SR Controller
SR
Concierge
1
Faceplate
Custom Options
SR1:
1
1
N
Surface
Plastic Flush
Box
SR2 and
SR3:
Primary
Metal Flush Box Ready
2
Flush
3
Clear Flush
2
3
No Box
No Faceplate
4
No Primary
X
A
Zigbee
North
America
Plastic Surface B
Box
Zigbee
Europe /
5
Metal Surface Asia
Box
*Messenger
kits must use
plastic boxes
C
Zigbee
International
D
Inncom RF
E
Crestron
F
Telkonet
Handing
Secondary
N
No
Secondary
Finish
0
Thickness
Secondary
Communication
Primary
SRC
Door
N
Primary
Style
Handing
L
LH
R
Door
Thickness Faceplate
A
1.75-2.38
[44-60]
RH
B
LHR
C
X
Y
RHR
Reader
1.38 [35]
2.50 - 3.13
[63.5 - 79.5]
1
1"
PCB
Hardware Controller Reader
Custom Options
Reader
SR1:
0
Standard
SR2 &
SR3:
0
Standard
A
Assembled
Reader
PCB
0
Finish
Hardware Controller Reader
SR1:
1
NN
Standard Satin
Chrome
2
Satin Brass
3
Dark
Mahogany
4
No
SC
Faceplate Satin
Chrome
SC
Satin
Chrome
SB
Satin
Brass
Black
BC
Bright
Chrome
BB
5
Bright
Chrome
Bright
6
Bright Brass Brass
BL
Black
Plastic
BR
Brown
Plastic
IV
Ivory
Plastic
WH
White
Plastic
SR2 &
SR3:
NN
No Reader
Plate
SC
Satin
Chrome
SB
Satin
Brass
BC
Bright
Chrome
BB
Bright
Brass
BL
Black
Plastic
BR
Brown
Plastic
IV
Ivory
Plastic
WH
White
Plastic
Note: Surface reader type only available in SC finish
Messenger options must use plastic face plates
96
Saflok Product Catalog / Order Guide
Saflok SR Series RFID (RCU/ECU)
Ordering
2.81"
71.37mm
4.5"
114.3mm
2.75"
69.85mm
1"
25.4mm
1.81"
45.97mm
1.75"
44.45mm
2.75"
69.85mm
Surface Mount SR1
.81"
20.57mm
Flush Mount SR2
SR3
Standard Model (Example)
Style
Version
Function
Relay
Mount
SR Controller
CSR
1
RC
0
1
1
Communication
Custom Options
Finish
N
N
0
0
0
SC
SC
Primary
Secondary
Reader
PCB
Packout
Controller
Reader
Build the model number with the desired options
Style
Version
Function
Relay
CSR
1
RC
0
Mount
SR Controller
Communication
N
Primary
Style
Version
Function
Relay
Mount
SR Controller
SR Reader
1
RC
RCU
0
STD
(1 Relay)
1*
Surface
2
Flush
3
Clear
1
Plastic Flush
Box
2
N
No Primary
A
Zigbee
Metal Flush Box North
America
3
(158mW)
No Box
No Faceplate
4
Plastic Surface
Box
5
Metal Surface
Box
Option 4
Comes with No
Electrical Box,
No Faceplate
or Faceplate
Mounting
Screws
Secondary
B
Zigbee
Europe /
Asia (10mW)
C
Zigbee
International
(87mW)
No
Secondary
PCB
Reader
Packout
Controller
Custom Options
Secondary
N
Finish
0
Communication
Primary
CSR
Custom Options
PCB
Reader
0
Standard
E
SR2 / SR3
Unassembled
Kit Only
Comes with
Reader and
Mounting
Hardware, No
Single Gang
Faceplate
0
Standard
Packout
0
Standard
B
Ocean
Shipping
Finish
Controller
NN
Metal:
*SC
Satin Chrome
SB
Satin Brass
BL
No
Faceplate
SC
SB
Plastic:
BL
Black
BC
E
BR
F
IV
X
WH
Telkonet
Primary
Ready
No Reader
Faceplate
Satin Chrome
Satin Brass
Black
BC
Bright
Chrome
BB
Bright Chrome Bright Brass
BB
Crestron
Reader
NN
D
Inncom RF
Reader
Bright Brass
Brown
Ivory
White
NN
No Finish
Option When
Selecting
SR2 Or SR3
Without
Controller Box/
Face Plate
BR
Brown
IV
Ivory
WH
White
NN
No Finish
Option When
Selecting
Unassembled
SR2 Or SR3
Reader
Note: *Surface reader type only available in SC finish
Messenger options must use plastic face plates
97
Saflok Product Catalog / Order Guide
Saflok Remote Control Unit (RCU)
Overview
Saflok XT RCU
•RCU switch works with electrified locking devices
•Fits into double-gang, deep-back switch box
•Controls electric locking devices up to 24 volts AC/DC
•Auto latch/unlatch feature eliminates need for manual dogging in System 6000TM
•Latch/unlatch keys accepted in both System 6000TM and DeskLincTM
•SPDT [email protected] relay with common, normally open and normally closed contact
•Optional Rain hood
•MessengerTM option requires plastic box
Voltage
12-24 AC/DC
Outside Dimensions
4.65"W x 4.59"H
Finishes
Satin Brass
Satin Chrome
Dark Mahogany
Saflok Quantum RFID RCU
•RCU switch works with electrified locking devices
•Fits into double-gang switch box
•Controls electric locking devices up to 24 volts AC/DC
•Auto latch/unlatch feature eliminates need for manual dogging
•SPDT [email protected] relay with common, normally open and normally closed contact
Mobile Access
The Quantum RFID RCU can operate using the dormakaba Mobile Access
Solutions
Voltage
12-24 AC/DC
Outside Dimensions
4.56"W x 4.50"H x 0.75"D
Plate Finishes
Satin Brass
Satin Chrome
Dark Mahogany
Bright Brass
Bright Chrome
Black
White
98
Saflok Product Catalog / Order Guide
Accessories
Narrow Stile (Adams Rite 8800 Series)
The narrow stile is designed to retract when electrical power is applied.
Size
36" Standard
Door Requirements
1 3/4" Standard, up to 2 1/4"
Mounted Height
40 1/4" from CL to finished floor
Minimum Stile
2"
Finishes
Satin Aluminum
Electric Strike
The electric strike is designed to release the door-locking mechanism
when electrical power is applied. It works with mortise, rim, and cylindrical locks.
Different models and sizes are available depending on the application.
All models are fail-secure.
Holding Force
1,000 lbs.
Voltage
24 VDC 1.5A
Size
4 7/8" Standard
Finishes
Satin Stainless
Electro-magnetic Lock
SaflokTM offers an electro-magnetic locking device for perimeter doors.
This locking unit provides over 1,200 pounds of locking force when activated.
It is available in single- or double-magnet configurations.
Voltage
12 or 24 VDC (Field-selectable)
Magnet Size
8 13/16"W x 2 13/16"H x 1 9/16"D
(225mm x 56mm x 40mm)
Armature Size
9"W x 2 1/4"H x 1/2"D
(230mm x 57mm x 14mm)
Holding Force
1,200 lbs
Finishes
Satin Aluminum
Motion Detector
When approaching the door the motion detector will automatically unlock,
allowing entry. The unit’s sensitivity is adjustable.
Imput Power
12 or 24 VDC or VAC (field-selectable) 35 mA @ 12 VDC, 38 mA
@ 24 VDC 38 mA avg. @ 12 VAC, 45 mA avg. @ 24 VAC
Relay
Two Form “C” contact sets rated 1.0 amp @ 30 VDC maximum
for DC-resistive loads
Temperature
Range
-20º to +120º F (-29º to +49º C). For UL-certified installations,
the temperature range is 32º to 120º F (0º to 49º C.)
Enclosure
6-1/4” W x 1-1/2” H x 1-1/2” D (158mm x 38mm x 38mm)
99
Saflok Product Catalog / Order Guide
Accessories
Exit Button
The exit button is a palm-sized button designed to deactivate electronic
locking devices. It is used for manual egress and works in conjunction
with other types of entry/exit devices.
Touch Bar Exit Device
The touch bar exit device is ideally suited to allow manual egress of
electro-magnetic locks, remote alarms, and other security devices.
The touch bar comes in a kit, which includes the touch bar,
a wire loop and pull handle.
SPDT Rated
5A, 250VAC
Finishes
Satin Aluminum / Dark Mahogany
Intercom
The intercom system allows communication with anyone trying to gain
entry through the perimeter doors. It comes with an intercom base,
speaker with call button, and a power supply. It also allows remote entry
depending on perimeter hardware currently in use.
Power Source
AC 12 – 16V or DC 12 – 24V
Consumption
Max. 4W (AC 16V), Max. 200 mA (DC 24V)
Calling
Electronic continuous tone (from door to master)
Electronic continuous tone or voice (from master to door)
Output
100 mW
Wiring
Two non-polarized wires and two wires for door releasey
Contact capacity
for door release
Max. AC 30V, 1A, Max. DC 30V, 1A
Distance
390´ (24 AWG), 650´ (22 AWG), 980´ (20 AWG),
1,570´ (18 AWG), 2,360´ ( 16 AWG)
Dimensions
5-1/2” W x 7” H x 2-1/4” D (143mm x 180mm x 55mm)
100
Saflok Product Catalog / Order Guide
Suggested Applications
Active Double Doors
Magnetic locks with touch bars
KIT Components:
• One power supply
• Two magnetic locks
• Two touch bars (inside)
• Remote control unit (outside)
• Tubular pull handles (outside)
Magnetic locks with motion
sensor and exit button
KIT Components:
• One power supply
• Two magnetic locks
• Exit button (inside)
• Motion sensor (inside)
• Remote control unit (outside)
• Tubular pull handles (outside)
Double Doors with One Active
Magnetic locks with touch bars
KIT Components:
• One power supply
• One magnetic lock
• One touch bar (inside)
• Remote control unit (outside)
• Tubular pull handle (outside)
Magnetic locks with motion
sensor and exit button
KIT Components:
• One power supply
• One magnetic lock
• One touch bar (inside)
• Remote control unit (outside)
• Tubular pull handle (outside)
101
Saflok Product Catalog / Order Guide
Suggested Applications
Single Door Magnetic Locks with Different Egress Devices
Magnetic lock with motion
sensor and exit button
Components:
• One power supply
• One magnetic lock
• Exit button (inside)
• Motion sensor (inside)
• Remote control unit
(outside)
Rim Exit Device
KIT Components:
• Mounting plate
• Mounting hardware
• Saflok rim panic lock
Vertical Rod Exit Device
KIT Components:
• Mounting plate
• Mounting hardware
• Saflok vertical rod panic lock
102
Magnetic lock
with touch bar
Components:
• One power supply
• One magnetic lock
•
One touch bar (inside)
• Remote control unit
(outside)
• Tubular pull handle
(outside)
Electric strike
Components:
•
One transformer
• One electric strike
• Remote control unit
(outside)
Narrow stile
Components:
• One power supply
•One electrified panic
bar (inside)
• Remote control unit
(outside)
• Tubular pull handle
(outside)
• Door loop
Saflok Product Catalog / Order Guide
Elevator Control Unit (ECU)
Overview
dormakaba offers an elevator control unit (ECU) and a multi-channel
elevator control unit (MCECU). The standard elevator control unit
uses a single relay that will control access to certain floors.
The MCECU’s most distinctive feature is that it enables up to 12 pass
levels (secure stops), while a standard RCU and ECU can only be
programmed to permit a single pass level. The MCECU card reader
can be installed on each elevator and is connected to a box containing
a processor circuit with up to 12 relays on it.
When a card having one or more pass levels on it is read, the
appropriate relay(s) will switch to allow recognition of the floor
buttons that each one controls.
All this translates into greater access control. Keycards can be
encoded to grant access to only one of the controlled floors, all the
controlled floors, or any combination in between the 12 passes.
Multi-Floor Controller (MFC)
The Saflok Multi-Floor Controller (MFC) is elevator control hardware
connected to the hotel network. The device is designed to operate
with either online or stand-alone elevator control units (ECU). It
provides access control and secure stops for multiple floors and
functions with RFID contactless lock models and System 6000. When
installed as an online solution, the MFC provides flexible access control
on the fly. RFID ECU can be controlled up to 1200 feet (350m) away
when using the MFC system.
Expanded Pass Option
For properties that require more than the standard 12-pass levels
(secure stops) with the MCECU, the expanded pass option is
expandable up to 256 new elevator pass levels for a given site. Each
new MCECU panel has 16 pass options, and multiple panels that can
be used together. This feature is available with the Quantum™ RFID
ECU only.
103
Saflok Product Catalog / Order Guide
Saflok XT Remote/Elevator Control
Unit (RCU/ECU)
Ordering
Standard Model (Example)
Style
C X
Version
Function
2
R C
T
Relay/Mag Kit Mount Reader
0
1
Custom
Communication
1
N
Primary
N
0
0
Secondary Reader
PCB
Finish
0
S
B
N N
Packout Faceplate
Reader
Build the model number with the desired options
Style
C X
Version
Function
2
R C
T
Relay/Mag Kit Mount Reader
0
Primary
Style
CXT
XT Card
Version
2
Function
RC
RCU
EC
Custom
Communication
Relay/Mag Kit Mount Reader
0
Standard 1
relay
ECU
(Messenger
not an
option)
1
Surface
(RCU
only)
1
Single
N
No Primary
Messenger:
A
2
Zigbee
N. America
(158mW)
Flush
B
Zigbee
Europe /
Asia (10mW)
0
Secondary Reader
Communication
Primary Secondary Reader
N
No
Secondary
0
PCB
N N
Packout Faceplate
Custom
PCB
Packout
0
SB
M
B
SC
Standard
MCC
Ocean
Personality Shipping
(ECU only)
Hilton BLE*
*Hilton
BLE only
for Hilton
properties
Reader
Finish
Faceplate
Reader
0
Standard Standard
D
Finish
Satin Brass
NN
No Reader
Satin Chrome
OZ
Dark
Mahogany
C
Zigbee
International
(87mW)
D
Inncom RF
E
Crestron
F
Telkonet
X
Messenger
Ready
Magnet Kits
CXT
XT Card
2
RC
RCU
F
1
G
2
PIR Sensor
Pushbar 36"
Door
H
Pushbar 48"
Door
Surface
Flush
1
Single
Magnet
2
Dual
Magnet
N
No Primary
Messenger:
A
Zigbee
N. America
(158mW)
B
Zigbee
Europe /
Asia (10mW)
C
Zigbee
International
(87mW)
D
Inncom RF
E
Crestron
F
Telkonet
X
Messenger
Ready
104
N
No
Secondary
0
0
Standard Standard
0
SB
B
SC
Standard Satin Brass
Ocean
Shipping
Satin Chrome
OZ
Dark
Mahogany
NN
No Reader
Saflok Product Catalog / Order Guide
Saflok XT/ Multi Chanel Controller
(MCC)
Ordering
Standard Model (Example)
Style
C X
Version
Function
2
M C
T
Relay/Mag Kit Mount Reader
1
2
Custom
Communication
1
N
Primary
N
0
Secondary Reader
Finish
0
PCB
0
S
B
N N
Packout Faceplate
Reader
Build the model number with the desired options
Style
C X
Version
Function
2
M C
T
Relay/Mag Kit Mount Reader
2
N
Primary
Style
CXT
XT Card
Version
2
Function
MC
MCC
Relay/Mag Kit Mount Reader
1
8 relay
2
12 relay
2
Flush
Custom
Communication
Communication
Primary Secondary Reader
1
N
2
1
Single
Dual
0
Secondary Reader
No Primary
Go Far
2
Go Far
International
N
No
Secondary
0
Finish
0
PCB
N N
Packout Faceplate
Custom
PCB Packout
0
Finish
Faceplate
Reader
0
SB
B
SC
Standard Standard Standard
Ocean
Shipping
Reader
Satin Brass
NN
No Reader
Satin Chrome
OZ
Dark
Mahogany
105
Saflok Product Catalog / Order Guide
Saflok Quantum MT Remote/
Elevator Control Unit (RCU/ECU)
Ordering
Standard Model (Example)
Style
Version
Function
C Q C
2
E C
Relay/Mag Kit Mount Reader
1
2
Custom
Communication
1
N
Primary
N
0
Secondary Reader
Finish
0
PCB
0
N N
S
Packout Faceplate
B
Reader
Build the model number with the desired options
Style
Version
Function
C Q C
2
E C
Relay/Mag Kit Mount Reader
2
1
0
Primary
Style
CQC
Quantum
Card
Version
2
Function
EC
ECU
(Messenger
not an
option)
Relay/Mag Kit Mount Reader
1
2
Standard 1 relay Flush
Custom
Communication
1
Single
Secondary Reader
Communication
Primary Secondary Reader
N
No Primary
N
No
Secondary
0
Standard
Finish
0
PCB
N N
Packout Faceplate
Reader
Custom
PCB Packout
Finish
Faceplate
Reader
0
NN
0
Standard Standard
B
Ocean
Shipping
No
Faceplate
SB
Satin Brass
SC
Satin Chrome
OZ
Dark
Mahogany
BB
Bright Brass
BC
Bright
Chrome
SN
Satin Nickel
AB
Antique Brass
BK
Black
106
Saflok Product Catalog / Order Guide
Saflok Quantum MT Multi Channel
Controller (MCC)
Ordering
Standard Model (Example)
Style
Version
Function
C Q C
2
M C
Relay/Mag Kit Mount Reader
1
2
Custom
Communication
1
N
Primary
N
0
Secondary Reader
Finish
0
PCB
0
N N
S
Packout Faceplate
B
Reader
Build the model number with the desired options
Style
Version
Function
C Q C
2
M C
Relay/Mag Kit Mount Reader
2
N
Primary
Style
CQC
Quantum
Card
Version
2
Function
MC
MCC
Relay/Mag Kit Mount Reader
1
8 relay
2
12 relay
2
Flush
Custom
Communication
Communication
Primary Secondary Reader
1
N
2
1
Single
Dual
0
Secondary Reader
No Primary
Go Far
2
Go Far
International
N
No
Secondary
0
Standard
Finish
0
PCB
N N
Packout Faceplate
Reader
Custom
PCB Packout
Finish
Faceplate
Reader
0
NN
0
Standard Standard
B
Ocean
Shipping
No
Faceplate
SB
Satin Brass
SC
Satin Chrome
OZ
Dark
Mahogany
BB
Bright Brass
BC
Bright
Chrome
SN
Satin Nickel
BK
Black
AB
Antique Brass
107
Saflok Product Catalog / Order Guide
Saflok Quantum RFID Remote/
Elevator Control Unit (RCU/ECU)
Ordering
Standard Model (Example)
Style
Version
Function
C Q M
2
R C
Relay/Mag Kit Mount Reader
0
1
Custom
Communication
1
N
Primary
B
0
Finish
0
Secondary Reader
PCB
D
S
B
S
Packout Faceplate
B
Reader
Build the model number with the desired options
Style
Version
Function
C Q M
2
R C
Relay/Mag Kit Mount Reader
CQM
Quantum RFID
Version
2
Function
RC
RCU
EC
Finish
0
Primary
Style
Custom
Communication
Relay/Mag Kit Mount Reader
0
Standard 1
relay
ECU
(Messenger
not an
option)
1
Surface
(RCU
Only
1
Single
2
Communication
Primary Secondary Reader
N
No Primary
B
BLE
Messenger: Ready
(RCU Only) C
A
Flush
Secondary Reader
Zigbee
N. America
(158mW)
B
Zigbee
Europe
/ Asia
(10mW)
C
BLE
Enabled
PCB
0
0
A
E
M
F
Custom
PCB Packout
Standard Standard
Plain Lens BLE FW
D
Marriott
Lens*
*Hilton
BLE only
for Hilton
Properties
*Marriott ECU:
Lens
M
only for
MCC
Marriott Personality
properties
Hilton BLE*
Packout Faceplate
Hilton BLE
FW*
Without
B
SB
Standard Messenger:
Satin Brass
Ocean
Shipping SC
Satin Chrome
OZ
Inncom RF
E
Crestron
F
Telkonet
X
Satin Chrome
OZ
Dark
Mahogany
BC
Bright
Chrome
BK
Satin Nickel
With
Messenger:
BL
Black
*Hilton BLE
and Hilton
Load only
for Hilton
Properties
SC
Bright Brass
Black
MCC Hilton
BLE FW*
Satin Brass
BB
Bright Chrome
P
SB
Dark
Mahogany
BB
MCC
BLE FW
D
Finish
Faceplate
Reader
0
M
Zigbee
International
(87mW)
Reader
Bright Brass
BC
SN
AB
Antique Brass
BK
Black
BR
Brown
IV
Ivory
WH
Messenger
Ready
White
Magnet Kits
CQM
Quantum RFID
2
RC
RCU
F
1
G
2
PIR Sensor
Pushbar 36"
Door
H
Pushbar 48"
Door
Surface
Flush
1
Single
Magnet
2
Dual
Magnet
N
No Primary
BLE
Messenger: Ready
A
Zigbee
N. America
(158mW)
B
C
BLE
Enabled
D
0
0
0
A
E
B
Standard
Standard
Plain Lens BLE FW
M
Marriott
Lens*
Hilton BLE*
*Marriott
Zigbee
Lens
*Hilton
Europe /
Asia (10mW) BLE only only for
for Hilton Marriott
C
Properties properties
Zigbee
International
(87mW)
F
Hilton BLE
FW*
*Hilton
BLE only
for Hilton
Properties
Standard
Ocean
Shipping
Without
Messenger:
SB
Satin Brass
Satin Chrome
SB
SC
BC
Bright
Chrome
With
Messenger:
E
Black
Crestron
F
Telkonet
X
Messenger
Ready
Satin Brass
SC
OZ
Satin Chrome Dark
Mahogany
OZ
Dark
BC
Mahogany
Bright
Chrome
BB
Bright Brass
D
Inncom RF
108
B
BL
BR
Brown
IV
Ivory
WH
White
Saflok Product Catalog / Order Guide
Saflok Quantum RFID Remote/
Elevator Control Unit (RCU/ECU)
Ordering
Screwless Kit
Standard Model (Example)
Style
Version
Function
C Q M
2
R C
Relay/Mag Kit Mount Reader
0
2
Custom
Communication
1
N
Primary
B
0
Finish
0
Secondary Reader
PCB
0
B
S
S
Packout Faceplate
B
Reader
Build the model number with the desired options
Style
Version
Function
C Q M
2
R C
Relay/Mag Kit Mount Reader
0
2
1
N
Primary
Style
CQM
Quantum RFID
Version
2
Function
RC
RCU
Relay/Mag Kit Mount Reader
0
Standard 1
relay
2
Flush
1
Single
Custom
Communication
0
Secondary Reader
Communication
Primary Secondary Reader
N
No Primary
Messenger:
(RCU Only)
A
Zigbee
N. America
(158mW)
B
Zigbee
Europe
/ Asia
(10mW)
C
Zigbee
International
(87mW)
D
Inncom RF
E
Crestron
F
Telkonet
X
Messenger
Ready
Finish
B
BLE
Ready
C
BLE
Enabled
0
Standard
Packout Faceplate
Custom
PCB Packout
0
0
BS
A
M
F
Plain Lens BLE FW
D
*Hilton
BLE only
for Hilton
Properties
*Marriott
Lens
only for
Marriott
properties
Hilton
BLE FW*
*Hilton
BLE only
for Hilton
Properties
Reader
Finish
Faceplate
Reader
Standard Standard Black
Screwless
E
Marriott
Lens*
Hilton BLE*
PCB
B
BT
Ocean
Shipping Brown
Screwless
VS
Ivory
Screwless
WS
White
Screwless
AL
Almond
Screwless
GR
Gray
Screwless
LA
SB
Satin Brass
SC
Satin Chrome
OZ
Dark
Mahogany
BB
Bright Brass
BC
Bright
Chrome
SN
Satin Nickel
AB
Antique Brass
BK
Black
Light Almond
Screwless
BE
Beige
Screwless
TP
Taupe
Screwless
SI
Sienna
Screwless
109
Saflok Product Catalog / Order Guide
Saflok Quantum RFID Multi Channel Controller
(MCC/EMCC)-Multi Floor Controller (MFC)
Ordering
Standard Model (Example)
Style
Version
Function
C Q M
2
M C
Relay/Mag Kit Mount Reader
1
2
Custom
Communication
1
N
Primary
B
0
Finish
0
Secondary Reader
PCB
0
S
B
S
Packout Faceplate
B
Reader
Build the model number with the desired options
Style
Version
C Q M
2
Function
Relay/Mag Kit Mount Reader
2
CQM
Quantum RFID
Version
2
Function
MC
MCC
ME
EMCC
MF
MFC
Relay/Mag Kit Mount Reader
MCC:
1
8 relay
2
12 relay
2
Flush
1
Single
2
Dual
MCC:
N
B
1
C
No Primary
Go Far
EMCC:
3
5
32 relay
EMCC:
1
48 relay
2
6
7
64 relay
8
80 relay
9
Go Far
BLE
Enabled
*Hilton
BLE only
for Hilton
Properties
Go Far
International
MFC:
1
96 relay
112 relay
International
B
BLE
Ready
D
Go Far
International Hilton BLE*
North
America
A
Secondary Reader
Communication
Primary Secondary Reader
2
16 relay
2
128 relay
MFC:
1
8 relay
3
16 relay
4
24 relay
5
32 relay
*Hilton BLE only supports MFC with up to 12 channels and must be configured as a pass device.
EMCC Does not support Hilton BLE
110
Finish
0
Primary
Style
Custom
Communication
PCB
Packout Faceplate
Custom
PCB Packout
Reader
Finish
Faceplate
Reader
0
0
0
SB
SB
A
E
B
SC
SC
Standard
Standard Standard Satin Brass
Plain Lens BLE FW
M
Marriott
Lens*
F
Hilton
BLE FW*
(not
available
with
EMCC)
*Marriott
Lens
only for
Marriott
properties *Hilton
BLE only
for Hilton
Properties
Ocean
Satin Chrome
Shipping OZ
Dark
Mahogany
BB
Bright Brass
BC
Satin Brass
Satin Chrome
OZ
Dark
Mahogany
BB
Bright Brass
BC
Bright Chrome Bright
Chrome
BK
Black
SN
Satin Nickel
AB
Antique Brass
BK
Black
Saflok Product Catalog / Order Guide
Saflok QuantumII RFID Remote/
Elevator Control Unit (RCU/ECU)
Ordering
Standard Model (Example)
Style
Version
Function
C Q R
2
R C
Relay/Mag Kit Mount Reader
0
1
Custom
Communication
1
N
Primary
B
0
Finish
0
Secondary Reader
PCB
0
S
B
S
Packout Faceplate
B
Reader
Build the model number with the desired options
Style
Version
C Q R
2
Function
Relay/Mag Kit Mount Reader
0
Primary
Style
CQR
QuantumII
Version
2
Custom
Communication
Function
RC
RCU
EC
Relay/Mag Kit Mount Reader
0
Standard 1
relay
ECU
(Messenger
not an
option)
1
Surface
(RCU
Only
1
Single
2
N
No Primary
Flush
B
BLE
Messenger: Ready
(RCU Only) C
A
Zigbee
N. America
(158mW)
B
Zigbee
Europe
/ Asia
(10mW)
C
0
Secondary Reader
Communication
Primary Secondary Reader
0
Finish
PCB
Packout Faceplate
Custom
PCB Packout
Finish
Faceplate
Reader
0
0
Without
E
B
SB
Standard Standard
Standard Messenger:
Satin Brass
Ocean
Shipping SC
F
Satin Chrome
Hilton BLE
FW*
OZ
Dark
ECU:
Mahogany
BLE FW
BLE
Enabled
D
Hilton BLE*
M
*Hilton
BLE only
for Hilton
Properties
BB
MCC
Personality
Bright Brass
N
P
D
Inncom RF
E
Crestron
F
Telkonet
X
SC
Satin Chrome
OZ
Dark
Mahogany
BB
Bright Brass
BC
BK
Satin Nickel
With
Messenger:
BL
*Hilton BLE
and Hilton
Load only
for Hilton
properties.
Satin Brass
Bright
Chrome
Black
MCC Hilton
BLE FW*
SB
BC
Bright Chrome
MCC BLE
FW
Zigbee
International
(87mW)
Reader
Black
SN
AB
Antique Brass
BK
Black
BR
Brown
IV
Ivory
WH
Messenger
Ready
White:
Magnet Kits
CQR
QuantumII
2
RC
RCU
F
1
G
2
PIR Sensor
Pushbar 36"
Door
H
Pushbar 48"
Door
Surface
Flush
1
Single
Magnet
2
Dual
Magnet
N
No Primary
B
BLE
Messenger: Ready
A
Zigbee
N. America
(158mW)
B
C
BLE
Enabled
D
Hilton BLE*
Zigbee
*Hilton
Europe /
Asia (10mW) BLE only
for Hilton
C
Properties
Zigbee
International
(87mW)
D
Inncom RF
E
Crestron
F
Telkonet
X
Messenger
Ready
0
0
Standard Standard
0
Without
B
SB
Standard Messenger:
Ocean
Shipping
Satin Brass
SC
SB
Satin Brass
SC
Satin Chrome
OZ
Satin Chrome Dark
Mahogany
OZ
Dark
BC
Mahogany
Bright
Chrome
BC
Bright
Chrome
With
Messenger:
BL
Black
BR
Brown
IV
Ivory
WH
White
111
Saflok Product Catalog / Order Guide
Saflok QuantumII RFID Remote/
Elevator Control Unit (RCU/ECU)
Ordering
Screwless Kit
Standard Model (Example)
Style
Version
Function
C Q R
2
R C
Relay/Mag Kit Mount Reader
0
2
Custom
Communication
1
A
Primary
B
0
Finish
0
Secondary Reader
PCB
0
B
S
S
Packout Faceplate
B
Reader
Build the model number with the desired options
Style
Version
Function
C Q R
2
R C
Relay/Mag Kit Mount Reader
0
2
1
CQR
QuantumII
Version
2
Function
RC
RCU
Relay/Mag Kit Mount Reader
0
Standard 1
relay
2
Flush
1
Single
Finish
0
Primary
Style
Custom
Communication
Secondary Reader
Communication
Primary Secondary Reader
N
No Primary
Messenger:
(RCU only)
A
Zigbee
N. America
(158mW)
B
Zigbee
Europe
/ Asia
(10mW)
C
Zigbee
International
(87mW)
D
Inncom RF
E
Crestron
F
Telkonet
X
Messenger
Ready
B
BLE
Ready
C
BLE
Enabled
D
Hilton BLE*
*Hilton
BLE only
for Hilton
Properties
0
PCB
Packout Faceplate
Custom
PCB Packout
0
0
Finish
Faceplate
Reader
BS
Standard Standard Standard Black
Screwless
E
BLE FW
F
Hilton
BLE FW*
*Hilton
BLE only
for Hilton
Properties
B
BT
Ocean
Shipping Brown
Screwless
VS
Ivory
Screwless
WS
White
Screwless
AL
Almond
Screwless
GR
Gray
Screwless
LA
Light Almond
Screwless
BE
Beige
Screwless
TP
Taupe
Screwless
SI
Sienna
Screwless
112
Reader
SB
Satin Brass
SC
Satin Chrome
OZ
Dark
Mahogany
BB
Bright Brass
BC
Bright
Chrome
SN
Satin Nickel
AB
Antique Brass
BK
Black
Saflok Product Catalog / Order Guide
Saflok QuantumII RFID Multi Channel Controller
(MCC/EMCC)-Multi Floor Controller (MFC)
Ordering
Standard Model (Example)
Style
Version
Function
C Q R
2
M C
Relay/Mag Kit Mount Reader
1
2
Custom
Communication
1
N
Primary
B
0
Finish
0
Secondary Reader
PCB
0
S
B
S
Packout Faceplate
B
Reader
Build the model number with the desired options
Style
Version
C Q R
2
Function
Relay/Mag Kit Mount Reader
2
0
Primary
Style
CQR
QuantumII
Version
2
Custom
Communication
Function
MC
MCC
ME
EMCC
MF
MFC
Relay/Mag Kit Mount Reader
MCC:
1
8 relay
2
12 relay
2
Flush
1
Single
2
Dual
MCC:
N
B
1
C
No Primary
Go Far
EMCC:
3
2
5
32 relay
EMCC:
1
48 relay
2
16 relay
6
7
64 relay
8
80 relay
9
*Hilton
BLE only
for Hilton
Properties
MFC:
1
96 relay
112 relay
International
B
BLE
Enabled
Go Far
International
North
America
A
BLE
Ready
D
Go Far
International Hilton BLE*
Go Far
0
Secondary Reader
Communication
Primary Secondary Reader
0
Finish
PCB
Packout Faceplate
Custom
PCB Packout
Reader
Finish
Faceplate
Reader
0
0
SB
SB
E
B
SC
SC
Standard Standard Standard Satin Brass
BLE FW
F
Hilton
BLE FW*
(not
available
with
EMCC)
*Hilton
BLE only
for Hilton
Properties
Ocean
Satin Chrome
Shipping OZ
Dark
Mahogany
BB
Bright Brass
BC
Satin Brass
Satin Chrome
OZ
Dark
Mahogany
BB
Bright Brass
BC
Bright Chrome Bright
Chrome
BK
Black
SN
Satin Nickel
AB
Antique Brass
BK
Black
2
128 relay
MFC:
1
8 relay
3
16 relay
4
24 relay
5
32 relay
*Hilton BLE only supports MFC with up to 12 channels and must be configured as a pass device.
EMCC Does not support Hilton BLE
113
Saflok Product Catalog / Order Guide
114
Saflok Product Catalog / Order Guide
Saflok QuantumIII RFID Remote/Elevator
Control Unit (RCU/ECU)
Ordering
Standard Model (Example)
Style
Version
Function
C Q T
2
R C
Relay/Mag Kit Mount Reader
0
1
Custom
Communication
1
N
Primary
B
0
Finish
0
Secondary Reader
PCB
0
S
B
B
Packout Faceplate
K
Reader
Build the model number with the desired options
Style
Version
C Q T
2
Function
Relay/Mag Kit Mount Reader
1
0
Primary
Style
CQT
QuantumIII
Version
2
Custom
Communication
Function
RC
RCU
EC
Relay/Mag Kit Mount Reader
0
Standard 1
relay
ECU
(Messenger
not an
option)
1
Surface
(RCU
Only
1
Single
2
N
No Primary
Flush
B
BLE
Messenger: Ready
(RCU Only) C
A
Zigbee
N. America
(158mW)
B
Zigbee
Europe
/ Asia
(10mW)
C
0
Secondary Reader
Communication
Primary Secondary Reader
0
Finish
PCB
B
Packout Faceplate
Custom
PCB Packout
0
K
Reader
Finish
Faceplate
Reader
0
Without
B
SB
Standard Standard Standard Messenger:
BK
Black
Satin Brass
Ocean
Shipping SC
Satin Chrome
BLE
Enabled
D
OZ
Hilton BLE*
Dark
Mahogany
*Hilton
BLE only
for Hilton
Properties
BB
Bright Brass
BC
Bright Chrome
BK
Zigbee
International
(87mW)
Black
With
Messenger:
D
Inncom RF
BL
Crestron
BR
Telkonet
IV
E
Black
F
Brown
X
Ivory
WH
Messenger
Ready
White
Magnet Kits
CQT
QuantumIII
2
RC
RCU
F
1
G
2
PIR Sensor
Pushbar 36"
Door
H
Pushbar 48"
Door
Surface
Flush
1
Single
Magnet
2
Dual
Magnet
N
No Primary
B
BLE
Messenger: Ready
A
Zigbee
N. America
(158mW)
B
C
BLE
Enabled
D
Hilton BLE*
Zigbee
*Hilton
Europe /
Asia (10mW) BLE only
for Hilton
C
Properties
Zigbee
International
(87mW)
0
0
0
Standard Standard Standard
B
Ocean
Shipping
Without
Messenger:
SB
SC
Satin Chrome
OZ
Dark
Mahogany
BB
Bright Brass
BC
Bright
Chrome
With
Messenger:
E
Black
Crestron
F
Telkonet
X
Messenger
Ready
Black
Satin Brass
D
Inncom RF
BK
BL
BR
Brown
IV
Ivory
WH
White
115
Saflok Product Catalog / Order Guide
Saflok QuantumIII RFID Remote/Elevator
Control Unit (RCU/ECU)
Ordering
Screwless Kit
Build the model number with the desired options
Style
Version
Function
2
R C
C Q
Relay/Mag Kit Mount Reader
0
2
1
N
Primary
Style
CQT
QuantumIII
Version
2
Function
RC
RCU
Relay/Mag Kit Mount Reader
0
Standard 1
relay
2
Flush
1
Single
Custom
Communication
0
N
No Primary
Messenger:
A
Zigbee
N. America
(158mW)
B
Zigbee
Europe
/ Asia
(10mW)
C
Zigbee
International
(87mW)
D
Inncom RF
E
Crestron
F
0
Secondary Reader
Communication
Primary Secondary Reader
B
BLE
Ready
C
BLE
Enabled
D
Hilton BLE*
*Hilton
BLE only
for Hilton
Properties
0
Finish
PCB
Packout Faceplate
Custom
PCB Packout
0
0
Finish
Faceplate
Reader
BS
Standard Standard Standard Black
Screwless
B
BT
Ocean
Shipping Brown
Screwless
VS
Ivory
Screwless
WS
White
Screwless
AL
Almond
Screwless
GR
Gray
Screwless
LA
Light Almond
Screwless
Telkonet
BE
Messenger
Ready
TP
X
Beige
Screwless
Taupe
Screwless
SI
Sienna
Screwless
116
Reader
BK
Black
Saflok Product Catalog / Order Guide
Saflok QuantumIII RFID Multi Channel
Controller (MCC/EMCC)-Multi Floor
Controller (MFC)
Ordering
Standard Model (Example)
Style
Version
Function
C Q T
2
M C
Relay/Mag Kit Mount Reader
1
2
Custom
Communication
1
N
Primary
B
0
Finish
0
Secondary Reader
PCB
0
S
B
B
Packout Faceplate
K
Reader
Build the model number with the desired options
Style
Version
C Q T
2
Function
Relay/Mag Kit Mount Reader
2
0
Primary
Style
CQT
QuantumIII
Version
2
Custom
Communication
Function
MC
MCC
ME
EMCC
MF
MFC
Relay/Mag Kit Mount Reader
MCC:
1
8 relay
2
12 relay
2
Flush
1
Single
2
Dual
MCC:
N
B
1
C
No Primary
Go Far
EMCC:
3
2
5
32 relay
EMCC:
1
48 relay
2
16 relay
6
7
64 relay
8
80 relay
9
*Hilton
BLE only
for Hilton
Properties
0
PCB
B
Packout Faceplate
Custom
PCB Packout
0
K
Reader
Finish
Faceplate
Reader
0
SB
B
SC
Standard Standard Standard Satin Brass
BK
Black
Ocean
Satin Chrome
Shipping OZ
Dark
Mahogany
BB
Bright Brass
BC
Bright Chrome
BK
Black
MFC:
1
North
America
112 relay
International
B
BLE
Enabled
Go Far
International
96 relay
A
BLE
Ready
D
Go Far
International Hilton BLE*
Go Far
0
Secondary Reader
Communication
Primary Secondary Reader
Finish
2
128 relay
MFC:
1
8 relay
3
16 relay
4
24 relay
5
32 relay
*Hilton BLE only supports MFC with up to 12 channels and must be configured as a pass device.
EMCC Does not support Hilton BLE
117
Saflok Product Catalog / Order Guide
Saflok QuantumIV RFID Remote/Elevator
Control Unit (RCU/ECU)
Ordering
Standard Model (Example)
Style
Version
Function
C Q F
2
R C
Relay/Mag Kit Mount Reader
0
1
Custom
Communication
1
N
Primary
B
0
Finish
0
Secondary Reader
PCB
0
S
B
S
Packout Faceplate
B
Reader
Build the model number with the desired options
Style
Version
C Q F
2
Function
Relay/Mag Kit Mount Reader
1
0
Primary
Style
CQF
QuantumIV
Version
2
Custom
Communication
Function
RC
RCU
EC
Relay/Mag Kit Mount Reader
0
Standard 1
relay
ECU
(Messenger
not an
option)
1
Surface
(RCU
Only
1
Single
2
N
No Primary
Flush
B
BLE
Messenger: Ready
(RCU Only) C
A
Zigbee
N. America
(158mW)
B
Zigbee
Europe
/ Asia
(10mW)
C
0
Secondary Reader
Communication
Primary Secondary Reader
0
Finish
PCB
Packout Faceplate
Custom
PCB Packout
0
Finish
Faceplate
Reader
0
Without
B
SB
Standard Standard Standard Messenger:
Satin Brass
Ocean
Shipping SC
Satin Chrome
BLE
Enabled
D
OZ
Hilton BLE*
*Hilton
BLE only
for Hilton
Properties
SC
Satin Chrome
OZ
Dark
Mahogany
Bright Brass
BC
Bright
Chrome
BK
Satin Nickel
Black
With
Messenger
Inncom RF
BL
Crestron
BR
Telkonet
IV
E
Satin Brass
BB
Bright Chrome
D
SB
Dark
Mahogany
BB
Zigbee
International
(87mW)
Reader
Bright Brass
BC
SN
BK
Black
Black
F
Brown
X
Ivory
WH
Messenger
Ready
White
Magnet Kits
CQF
QuantumIV
2
RC
RCU
F
1
G
2
PIR Sensor
Pushbar 36"
Door
H
Pushbar 48"
Door
Surface
Flush
1
Single
Magnet
2
Dual
Magnet
N
No Primary
Messenger:
A
Zigbee
N. America
(158mW)
B
B
BLE
Ready
C
BLE
Enabled
D
Hilton BLE*
Zigbee
*Hilton
Europe /
BLE only
Asia (10mW)
for Hilton
C
Properties
Zigbee
International
(87mW)
0
0
Standard Standard Standard
B
Ocean
Shipping
Without
Messenger:
SB
Satin Brass
Satin Chrome
SB
SC
Satin Brass
SC
OZ
Satin Chrome Dark
Mahogany
OZ
Dark
BB
Mahogany
Bright Brass
BB
Bright Brass
BC
BC
Bright
Chrome
Bright
Chrome
SN
Inncom RF
BL
Black
Crestron
BR
Telkonet
IV
D
E
F
X
Messenger
Ready
118
0
With
Messenger:
Black
Brown
Ivory
WH
White
Satin Nickel
BK
Saflok Product Catalog / Order Guide
Saflok QuantumIV RFID Remote/Elevator
Control Unit (RCU/ECU)
Ordering
Screwless Kit
Standard Model (Example)
Style
Version
Function
C Q F
2
R C
Relay/Mag Kit Mount Reader
0
2
Custom
Communication
1
N
Primary
B
0
Finish
0
Secondary Reader
PCB
0
B
S
S
Packout Faceplate
B
Reader
Build the model number with the desired options
Style
Version
Function
C Q F
2
R C
Relay/Mag Kit Mount Reader
0
2
1
N
Primary
Style
CQF
QuantumIV
Version
2
Function
RC
RCU
Relay/Mag Kit Mount Reader
0
Standard 1
relay
2
Flush
1
Single
Custom
Communication
0
N
No Primary
Messenger:
A
Zigbee
N. America
(158mW)
B
Zigbee
Europe
/ Asia
(10mW)
C
Zigbee
International
(87mW)
D
Inncom RF
E
Crestron
F
0
Secondary Reader
Communication
Primary Secondary Reader
B
BLE
Ready
C
BLE
Enabled
D
Hilton BLE*
*Hilton
BLE only
for Hilton
Properties
0
Finish
PCB
Packout Faceplate
Custom
PCB Packout
0
0
Finish
Faceplate
Reader
BS
Standard Standard Standard Black
Screwless
B
BT
Ocean
Shipping Brown
Screwless
VS
Ivory
Screwless
WS
White
Screwless
AL
Almond
Screwless
GR
Gray
Screwless
SB
Satin Brass
SC
Satin Chrome
OZ
Dark
Mahogany
BB
Bright Brass
BC
Bright
Chrome
SN
Satin Nickel
BK
Black
LA
Light Almond
Screwless
Telkonet
BE
Messenger
Ready
TP
X
Reader
Beige
Screwless
Taupe
Screwless
SI
Sienna
Screwless
119
Saflok Product Catalog / Order Guide
Saflok QuantumIV RFID Multi Channel
Controller (MCC/EMCC)-Multi Floor
Controller (MFC)
Ordering
Standard Model (Example)
Style
Version
Function
C Q F
2
M C
Relay/Mag Kit Mount Reader
1
2
Custom
Communication
1
N
Primary
B
0
Finish
0
Secondary Reader
PCB
0
S
B
S
Packout Faceplate
B
Reader
Build the model number with the desired options
Style
Version
C Q F
2
Function
Relay/Mag Kit Mount Reader
2
0
Primary
Style
CQF
QuantumIV
Version
2
Function
MC
MCC
ME
EMCC
MF
MFC
Relay/Mag Kit Mount Reader
MCC:
1
8 relay
2
12 relay
2
Flush
1
Single
2
Dual
MCC:
N
B
1
C
No Primary
Go Far
EMCC:
3
5
32 relay
EMCC:
1
48 relay
2
6
7
64 relay
8
80 relay
9
Go Far
Hilton
BLE only
for Hilton
Properties
Go Far
International
MFC:
1
North
America
112 relay
International
B
BLE
Enabled
D
Go Far
International Hilton BLE*
96 relay
A
BLE
Ready
2
128 relay
MFC:
1
8 relay
3
16 relay
4
24 relay
5
32 relay
*Hilton BLE only supports MFC with up to 12 channels and must be configured as a pass device.
EMCC Does not support Hilton BLE
0
Finish
0
Secondary Reader
Communication
Primary Secondary Reader
2
16 relay
120
Custom
Communication
PCB
S
Packout Faceplate
Custom
PCB Packout
0
B
Reader
Finish
Faceplate
Reader
0
SB
SB
B
SC
SC
Standard Standard Standard Satin Brass
Ocean
Satin Chrome
Shipping OZ
Dark
Mahogany
BB
Bright Brass
BC
Satin Brass
Satin Chrome
OZ
Dark
Mahogany
BB
Bright Brass
BC
Bright Chrome Bright
Chrome
BK
Black
SN
Satin Nickel
BK
Black
Saflok Product Catalog / Order Guide
121
Saflok Product Catalog / Order Guide
Exit Device Hardware
Overview
dormakaba offers a series of exit device hardware that is compatible
with mechanical and electrical applications. This hardware is
manufactured for the most demanding access/egress applications.
Vertical Rod Exit Device: The Dorma 9400 series is a
surface- mounted vertical rod exit device with a modern
touch bar design.
Rim Exit Device: The Dorma 9300 series is a single-point rim
latch with a modern touch bar design.
dormakaba Panic Bar Locks,
Combining the Best Features – Inside and Out
• Easy-to-install mechanical interface eliminates the need for an electrician
• No wires running through the door, frame, or hinges
• Self-contained battery allows up to 60,000 entries or up to 3 years for Confidant RFID
• ANSI Grade 1 rating
• Auditable entries
• Auto latch/unlatch feature makes manual dogging unnecessary
• UL fire rated (optional)
Dorma 9300 Series Rim Exit Device
Dorma 9400 Series Vertical Rod Exit Device
Hand
Non-handed
Stock
36” door width (standard); 48” door
width available at an upcharge
Door Types
Wood, hollow metal, fiberglass, or
aluminum
Door Requirements
Fits standard 1 3/4” - 2 1/4” doors
Mounting height
40” above finished floor
Stile Width
4 5/8” with standard 99 strike
4 1/8” with optional 98 strike
Latch Bolts
Stainless steel dead-locking;
Pullman-type top latch
Finishes*
Bright Brass
Satin Brass
Bright Stainless Steel
Satin Stainless Steel
Other panic bar options available
*Check availability of finish for corresponding lock
Available locks
Confidant RFID
Saflok RT
Saflok MT RFID
122
Saflok ädəse
Saflok MT
Saflok Product Catalog / Order Guide
Exit Device Operator Confidant RFID
Ordering
23/8”
111/8”
Exit Device
45/8”
15/16”
3”
Standard Model Number - Exit Device Operator - NA (Example)
C
S
00
0
Lock Model
1
Bluetooth
7
S
R
1
C
Finish
Installation Options
Build the model number with the required options
C
S
Finish
C
S
Saflok
3
0
M0
1
Dummy Messenger
Trim
ready
M1
Messenger
US
No BLE
BLE Ready
(soon available)
2
BLE Enabled
(soon available)
1 Rim Operator Device
Outdoor front lock housing.
Includes Dorma exit device.
2 Mortise Operators
Outdoor front lock housing.
Exit device not included.
7 Dorma 9300
0 Von Duprin 9875, 9975EO-F
A Arrow S3908, S1908
S
R
1
L
Left
2
Short Right
Return L
Long
Return
1 3/4” - 2”
(46-53mm)
>2” - 2 1/4”
(53-57mm)
Return
Finish
Handing
Operating
System
00
Standalone
Door
Thickness
Installation Options
Outside
Lever
Bluetooth
Type of Exit
Device
Lock Model
Model
Finish
Bluethooth
Installation Options
System
Bluetooth
Confidant
RFID
(Fixed value)
Lock Model
C
Satin Chrome
E
Satin Chrome Exterior
U
Satin Chrome Oceanfront
B
Satin Brass
3 Rim Operators
Outdoor front lock housing.
Exit device not included.
4 Vertical Rod Surface
Mount Operators
Outdoor front lock housing.
Exit device not included.
5 Vertical Rod Concealed
Operators
Outdoor front lock housing.
Exit device not included.
0 Von Duprin 98/99 EO-F
1 Arrow S3888
2 Yale 7100-36
5 Precision 21, FL21
6 Detex 10, FL10
7 Dorma 9300/F9300
8 Arrow S1808, S3808
9 Detex V40
H Hager 4500
0 Von Durpin 9827, 9927EO-F
1 Arrow S3708, A1708
2 Yale 7170
5 Precision 22, FL22
6 Detex 20, FL20
7 Dorma 9400/F9400
S Sargent 8710
H Hager 4500
H
Satin Brass Exterior
0 Von Durpin 9847, 9947EO-F
Rods are inside
2 Yale 7160
the door.
7 Dorma 9100
123
Saflok Product Catalog / Order Guide
Saflok RT Panic Bar Trim
Ordering
11⁄2”
(38.1 mm)
93⁄8”
(238.1 mm)
Exit Device
Front
35⁄16”
(84.1 mm)
27⁄8”
(73 mm)
Side
Standard Model (Example)
7
9
S
Model
1
7
2
1
E
N
6
0
1
Type of
Exit Device
RFID
Lever
Override
Handing
Version
Bluetooth
Door
Thickness
6
Finish
2
Finish
6
Build the model number with the desired options
7
9
E
Model
Model
79S1 Rim
Operator Device
2
Type of
Exit Device
Type of Exit Device
Operators
Outdoor front lock
housing. Exit device
not included.
79S3* Rim
Operators
Outdoor front lock
housing. Exit device
not included.
79S4*
Vertical Rod
Surface Mount
Operators
Outdoor front lock
housing. Exit device
not included.
79S5 Vertical
Rod Concealed
Operators
Outdoor front lock
housing. Exit device
not included.
124
9875,9975EO-F
A Arrow S3908,S1908
7 Dorma 9500
0 Von Duprin 98/99 EO-F
1 Arrow S3888
2 Yale 7100-36
5 Precision 21,FL21
6 Detex 10, FL10
7 Dorma 9300/F9300
8 Arrow S1808,S3808
9 Detex V40
H Hagar 4500
M Monarch 18-R
C Corbin Russwin 5200
0Von Duprin
9827,9927EO-F
1 Arrow S3708,S1708
2Yale 7170
5Precision 22,FL22
6Detex 20, FL20
7Dorma 9400/F9400
HHagar 4500
SSargent 8710
C Corbin Russwin 5200
9847,9947EO-F
2Yale 7160
7Dorma 9100/
F9100
Handing
Version
Bluetooth
Door
Thickness
Lever Type
Override
Handing
Version
Bluetooth
Door Thickness
0
1
Long/Front
0 Von Duprin
0Von Duprin
Override
2 1
7 Dorma 9300
Outdoor front lock
housing. Includes
Dorma exit device.
79S2 Mortise
6
Lever
RFID
Rods are
inside the
door.
E
Electronic
K
Mechanical key
cylindrical Lori
Universal (1539)
2
Short/Front key-in-knob
OR
Mechanical
recordable key
cylinder key-inE
Elevon/Front knob
Note: Gala and
Elevon levers only
available with
electronic override
G
N
Standard
** For Elevon
lever or vertical
rod surface
mount with BLE
X
Left Hand
Reverse
Y
Right Hand
Reverse
6
Contactless No BLE
Reader
1
BLE Ready
2
13/4“- 2“ (46-53 mm)
2
> 2“- 21/4“ (53-57 mm)
For door
BLE Enabled thickness 2
(> 2“- 21/4“)
10 weeks lead time
required.
Finishes
626
Satin
Chrome
606
Satin Brass
U26
Satin
Chrome
Supreme
Finish
Gala/Front
Exit Device Operator
• Allows exit doors equipped with panic devices to act as controlled entrances
• Weight: 3lbs (1.3kg)
• Minimum door style required 5” (127mm)
• Supplied with gasket kit for exterior doors
• All fitted with adaptor plates
Exit Device
• Two finishes available: satin chrome and satin brass
* For compatibility with Arrow S3808, S1808, S3708, S1708 order square
spindle to cross-point spindle adaptor (part# 032-511055)
** For Messenger ready order 79R model, for Online order 79Z
(79Y for Europe and Asia or 79Q for International)
125
Saflok Product Catalog / Order Guide
Saflok MT Series Exit Device
Ordering
2.75"
69.8mm
2.75"
69.8mm
MT RFID Front
MT Front
Exit Device
Standard model number (Continue building the model number to the right)
Model
Version
P M T
2
-
Panic Device
Device Type
A
0
Communication
N
Application
N
Primary
0
Secondary
Build the model number with the desired options (Continue building the model number to the right)
Model
Version
P M
2
Model
Version
PMT
3
PMR
MT Card
MT Card Exit Device
MT RFID Exit Device
2
MT RFID
Panic Device
Device Type
-
Primary
Panic Device
A AEB4200R Series* (Rim Only)
B Detex (Advantex) 10 Series (Rim Only)*
C Detex (Advantex) 20 Series (Vert Only)*
D Dorma 9300 (Rim Only)
E Dorma 9400 (Vert Only)
F Falcon 25 Series (Rim Only)
G Phi Series Fl21* (Rim Only)
H Phi Series Fl22* (Vert Only)
J Sargent 8713* (Vert Only; Square Spindle)
K Sargent 8715* (Vert Only; Bladed Spindle)
L Sargent 8888F* (Rim Only)
M Von Duprin 88
N Von Duprin 98
P Von Duprin 99
Q Yale 2100 Series*
R Yale 7100 Series*
S Hager 4500 Series*
Device Type
126
Application
Secondary
Communication
Primary
Secondary
Application
0
N
Mag Card /
Dummy:
0
Rim Devices:
X
N
E
Rim 36" Std Bar
A
No Bar
1
2
Rim 36" Fire Rated Bar
No Primary
Primary Ready
Zigbee
N. America (158mW)
3
B
4
C
Rim 48" Std Bar
Rim 48" Fire Rated Bar
Zigbee Europe / Asia
(10mW)
Vertical Rod Devices:
Zigbee International
(87mW)
Vertical 36" Std Bar
Inncom RF
Vertical 36" Fire Rated Bar
Crestron
Vertical 48" Std Bar
Telkonet
5
D
6
E
7
F
8
Vertical 48" Fire Rated Bar
Note: *Bar not offered
Communication
No Secondary
RFID:
A
BLE
Compatible
G
BLE Mod Bracket
H
Hilton BLE Mod
Bracket*
*Hilton BLE only for
Hilton Properties
Interior
Exterior
Saflok Product Catalog / Order Guide
Saflok MT Series Exit Device
Ordering
2.75"
69.8mm
2.75"
69.8mm
MT RFID Front
MT Front
Exit Device
Standard model number (Continued)
Lever
Handing
A
0
Type
Position
Door Size
L
Optional Adjustment
Finish
A
N
0
0
0
Thickness
Height/Offset
Outside
Inside
Packout
S B
Build the model number with the desired options (Continued)
Lever
Handing
Door Size
Optional Adjustment
Finish
0
Type
Position
Type
Lever
Position
A
Arc
C
Continental
E
Elevon
G
Gala
K
Regal Knob
P
Apogee
T
Troy
0
Standard
Height/Offset
Outside
Inside
Packout
Door Size
Thickness
Height/Offset
Outside
Optional Adjustment
Inside
Packout
Thickness
Handing
L
Left
Hand
R
Right
Hand
A
1.75" (44mm)
B
N
0
B
A
Standard
1.38" (35-40mm) 8' Door (Vert)
C
C
D
D
2.00" (51mm)
2.25" (57mm)
E
2.38" (60mm)
F
2.50" (63.5mm)
G
2.87"-3.00"
(73-76mm)
H
3.03" (77mm)
J
3.35" (85mm)
K
3.90" (100mm)
*Any door
thickness above
1.75 will require
engineering
approval and
possible custom
parts
9' Door (Vert)
10' Door (Vert)
Standard
Plain Lens (RFID
Only)
L
Marriott Lens
(RFID Only)*
*Marriott lens
only for Marriott
properties
0
Standard
D
Dummy
M
Dummy W/Messenger Cap
0
Standard
B
Ocean Shipment
Finish
BB
Bright Brass
BC
Bright Chrome
BK
Black
OZ
Dark Mahagony
SC
Satin Chrome
SN
Satin Nickel
SB
Satin Brass
* Knob Only
Available in BB,
BS, SB, SS
*Continental Not
Available In SN
*Only SC, BC, OZ,
and BK approved
for exterior
application
127
Saflok Product Catalog / Order Guide
Saflok ädƏse Exit Device
Ordering
2.75”
69.8mm
ädƏse Front
Exit Device
Standard model number (Continue building the model number to the right)
Model
P
X
Version
T
3
-
Panic Device
Device Type
A
0
Communication
N
Application
N
Primary
0
Secondary
Build the model number with the desired options (Continue building the model number to the right)
Model
P
X
Version
T
3
Version
Model
PXT
ädƏse Exit Device
3
Panic Device
Device Type
-
Primary
Panic Device
A AEB4200R Series* (Rim Only)
B Detex (Advantex) 10 Series (Rim Only)*
C Detex (Advantex) 20 Series (Vert Only)*
D Dorma 9300 (Rim Only)
E Dorma 9400 (Vert Only)
F Falcon 25 Series (Rim Only)
G Phi Series Fl21* (Rim Only)
H Phi Series Fl22* (Vert Only)
J Sargent 8713* (Vert Only; Square Spindle)
K Sargent 8715* (Vert Only; Bladed Spindle)
L Sargent 8888F* (Rim Only)
M Von Duprin 88
N Von Duprin 98
P Von Duprin 99
Q Yale 2100 Series*
R Yale 7100 Series*
S Hager 4500 Series*
Device Type
N
Rim Devices:
X
Rim 36" Std Bar
A
No Bar
1
2
Rim 36" Fire Rated Bar
128
No Primary
Primary Ready
Zigbee
N. America (158mW)
3
B
4
C
Rim 48" Std Bar
Rim 48" Fire Rated Bar
Zigbee Europe / Asia
(10mW)
Vertical Rod Devices:
Zigbee International
(87mW)
Vertical 36" Std Bar
Inncom RF
Vertical 36" Fire Rated Bar
Crestron
Vertical 48" Std Bar
Telkonet
5
D
6
E
7
F
8
Application
Secondary
Communication
Primary
Secondary
0
Vertical 48" Fire Rated Bar
Note: *Bar not offered
Communication
N
No Secondary
Application
0
Interior
E
Exterior
Saflok Product Catalog / Order Guide
Saflok ädƏse Exit Device
Ordering
2.75”
69.8mm
ädƏse Front
Exit Device
Standard model number (Continued)
Lever
A
Type
Handing
0
Door Size
L
Position
Optional Adjustment
Finish
A
N
0
0
0
Thickness
Height/Offset
Outside
Inside
Packout
S B
Build the model number with the desired options (Continued)
Lever
Handing
Door Size
Optional Adjustment
0
Type
Position
Type
Lever
Position
A
Arc
C
Continental
E
Elevon
G
Gala
K
Regal Knob
P
Apogee
T
Troy
0
Standard
Finish
0
Thickness
Handing
L
Left
Hand
R
Right
Hand
A
Height/Offset
Outside
Inside
Packout
Door Size
Thickness
Height/Offset
Outside
Optional Adjustment
Inside
Packout
1.75" (44mm)
B
N
Standard
B
1.38" (35-40mm) 8' Door (Vert)
C
C
D
D
2.00" (51mm)
2.25" (57mm)
E
2.38" (60mm)
F
2.50" (63.5mm)
G
2.87"-3.00"
(73-76mm)
H
3.03" (77mm)
J
3.35" (85mm)
K
3.90" (100mm)
*Any door
thickness above
1.75 will require
engineering
approval and
possible custom
parts
9' Door (Vert)
10' Door (Vert)
0
Standard
0
Standard
D
Dummy
0
Standard
B
Ocean Shipment
Finish
BB
Bright Brass
BC
Bright Chrome
BK
Black
OZ
Dark Mahagony
SC
Satin Chrome
SN
Satin Nickel
SB
Satin Brass
* Knob Only
Available in BB,
BS, SB, SS
*Continental Not
Available In SN
*Only SC, BC, OZ,
and BK approved
for exterior
application
129
Saflok Product Catalog / Order Guide
E-Plex 2000 Series
System Overview
The E-Plex 2000 combines the strength, simplicity and reliability of
our industry leading pushbutton locks with the enhanced features and
convenience of electronic access control. PIN access eliminates the cost
and problems of issuing and managing keys or magnetic cards. You will
no longer need to collect or change credentials each time there is a user
change or a credential is lost or stolen.
• 100 access codes – including user and service levels
• Cylindrical latch
• Simple to install and maintain
• Easy to manage – no software required
• Key override available
Easy to Install
The E-Plex 2000 easily installs on wood or metal doors with ASA 161 door
prep. Three through bolts secure the lock to the door. The installation
requires no wiring to or through the door, eliminating the risk of damage
pinched wires. The E-Plex 2000 is non-handed and field reversible
accommodates both left- and right-hand doors. The rugged and weatherresistant external housing can be mounted outdoors and includes
installation gasket
E-Plex 2000
Easy to manage
The E-Plex 2000 provides the flexibility to control hotel back-of-house access points according to security needs
during the business day. Users and locks are easily managed at the door with simple keypad programming.
Multiple operation modes include PIN entry, passage and lockout. Passage mode can be activated by authorized
user with assigned PIN and pre-programmed to re-lock after a certain number of hours.
Four authority levels give you control over who has access to various lock functions:
• Master level – performs all set-up and programming functions
• Manager level – administers common programming functions
• Access user level – entry granted with valid PIN
• Service level – codes for single event or single day access, programmable in advance
Easy to use
The E-Plex 2000’s user friendly design is equipped with ADA compliant levers. Programmable user parameters
customize the lock to the needs of different access points.
Audio and visual indicators notify users when access is granted or denied. User access code length can be set from
4 to 8 digits. Time interval between combination entry and relocks is variable from 2 to 20 seconds. Anti-tamper
feature disables the lock after multiple invalid combination entries – set for between 3 to 9 attempts and up to 90
seconds
130
Saflok Product Catalog / Order Guide
E-Plex 2000 Series
System Overview
Lock Specifications
Access Control:
Electronic pushbutton
Locking Device:
Cylindrical latch with UL 10C fire rating
Number of Codes:
100 access codes per door; over 100 million possible code combinations
Programming:
Locks are easily programmed via keypad
Handing:
Non-handed, pre-assembled for left-hand door installations - easily changed in the field
Key Override
(Optional):
Key-in-lever cylinder in Schlage C Keyway with black Kaba cap (as shown)
Operation Modes:
operation modes: PIN access; Lockout; Passage (can be toggled on / off or can be pre3
programmed to re-lock after a certain number of hours)
Authority Levels:
our different levels allow you to control who has access to specific lock functions, including
F
Service Codes - programmed for one time access or “come and go” access for 1 to 24 hours
User Parameters:
ode length: Adjustable to accept 4 to 8 digits Anti-tamper lockout: Adjustable from 3 to 9
C
invalid attempts with an adjustable period of 0 to 90 seconds Re-lock time: Adjustable from 2
to 20 seconds
Battery Operation:
atteries located in exterior housing; offers quick and easy battery replacements for
B
institutions (Three AA Alkaline batteries provide more than 100,000 cycles) Lock data is
maintained if batteries fail
Warranty:
Two-year warranty from date of installation; built-in warranty counter in lock memory
Mechanical Features
Construction:
ight-duty commercial cylindrical lockset, solid cast exterior housing, solid cast levers,
L
cylindrical drive wear tested for extensive use in indoor and outdoor applications
Numeric Keypad:
Vandal resistant, solid metal pushbuttons
Finishes:
Satin Chrome (626) or Satin Brass (606) housings & levers
Backsets:
2 3/4” (70 mm), 2 3/8” (60 mm)
Latch:
1/2” (13 mm) latch, 3/4” (19 mm) latch (optional)
Recommended
Minimum Stile:
5” (127 mm)
Weight:
8 lbs. (3.63 kg)
Door Preparation:
asily installs on wood or metal doors. ASA 161 door preparation with 3 additional through
E
bore holes
Door Thickness:
Pre-assembled to accommodate doors 1 5/8” (41 mm) to 2” (50 mm)
Certifications and Testing
Accessibility
standard:
Americans with Disabilities Act (ADA)
Fire rating:
UL 10C Fire rated
Environmental
Indoor/Outdoor Approved -31º F (-35º C) to + 151º F (66º C)
131
Saflok Product Catalog / Order Guide
E-Plex 2000 Series (Cylindrical Lock)
Ordering
1/2”
(13 mm)
15/8”
(41 mm)
1/2”
(13 mm)
87/8”
(225 mm)
23/4”
(70 mm)
115/16”
(49 mm)
Latch
115/16”
(49 mm)
11/8”
(29 mm)
3 1/4”
(83 mm)
23/4”
(70 mm)
3 1/4”
(83 mm)
21/4”
(57 mm)
Side
Back
Back Side
Front
21/4”
(57 mm)
Face Plate
T-Strike
Build the model number with the desired options
Model
E
2
Function
0
2000 Series
Cylindrical lock
Override
3
Function
Model
E20
Locking Device
3
Cylindrical Lock
Lever Style
L
Locking Device
1
1/2” (13 mm) throw
latch floating face
plate 23/4” Backset
2
Key Override
LEAVE BLANK for Solid Lever
without Key Override
XS
Key-In-Lever, Kaba Cylinder
included, Schlage C keyway
Finish
L
4
Lever Style
LL
Packaging
Lever- Long
Finishes
626
Satin Chrome
606
1
Packaging
41
1 per box
Satin Brass
1/2” (13 mm) throw
latch floating face
plate 23/8” Backset
Items supplied with the lock
•Installation Manual
•Full-scale template
•Hardware required for installations.
•Key-in-lever model supplied with Kaba high
security 1539 Schlage C keyway.
132
Lock Accessories
Saflok Product Catalog / Order Guide
Cores, Cylinders for Saflok RT Series
Ordering
Standard Model (Example)
Model
Pins
Keyway
9
6
3
Finish
Keying
4
Build the model number with the desired options
Pins
Model
Keyway
Finish
Keying
Finish
Keying
4
Models
9
Lori Cylinder
Compatible Locks:
Generation E760
Generation E730
Solitaire 710-II
Solitaire 720-II
SolitaireSMART
Oracode 660
Oracode 4400
770 Series
8
Unican Core
Compatible Locks:
SolitaireSMART
Solitaire 710
Solitaire 720
System 700-II
9
Recodeable Lori Cylinder
Compatible Locks:
Generation E760
Generation E730
Oracode 660
Oracode 4400
Solitaire 710-II
Solitaire 720-II
770 Series
134
Pins
6
6 Pins
Keyway
3
4B
Satin Brass
ANSI 606
KA
Keyed Alike
KAI
Keyed Alike by Group
MK
Master Keyed (for
Shabbat Complience)
6
3
7
1
6 Pins
7 Pins
Lori
4
Satin Brass ANSI
606
RMO
6 Pins
3
Keyed Alike
KAI
Keyed Alike by Group
2
MK
North American
Project order
6
KA
Master Keyed (for
Shabbat Complience)
4R
Satin Brass
ANSI 606
KA3
Three Combinations in
One Cylinder
Saflok Product Catalog / Order Guide
Keys for Saflok RT Series
Ordering
Standard Model (Example)
Model
Pins
Keyway
9
6
3
Key
E
Build the model number with the desired options
Pins
Model
Models
9
Key for Lori Cylinder
Pins
6
6 Pins
Keyway
Key
Keyway
Key
3
E
Entry
M
Master
EM
Individual Entry under a Master
8
Key for Unican Core
6
1
E
7
2
C
6 Pins
7 Pins
RMO
North American
Project order
Entry
Control
M
Master
EG
Entry under a group
CM
Control under a Master
CG
Control under a Group
EM
Individual Entry under a Master
9
Recodable Key Kit
6
6 Pins
3
0
Recodable Key Kit
135
Saflok Product Catalog / Order Guide
Decorative Plates for Saflok RT Series
Ordering
Specifications
Mounting screws and washers included where applicable. All plates are 1/32” (0.8 mm) thick.
Compatible with mortise (ASM, ESM) and cylindrical lock.
Availability
Location
Standard 14” (356 mm) X 45⁄8” (117 mm)
21/2”
(64 mm)
87/8”
(225 mm)
7/16”
(11mm)
5”
(127 mm)
Plate Number
Compatible with inside trim
for Messenger/Bluetooth
Indoor/Outdoor
Indoor/Outdoor
Long 171⁄2” (445 mm) X 45⁄8” (117 mm)
Finish
Stainless Steel
PVD Satin Brass
061-513071-630
061-513071-906
Indoor/Outdoor
Indoor/Outdoor
Stainless Steel
PVD Satin Brass
062-513073-630
062-513073-906
Indoor/Outdoor
Indoor/Outdoor
Stainless Steel
PVD Satin Brass
061-513070-630
061-513070-906
Compatible with inside trim
for Messenger/Bluetooth
113/8”
(289
mm)
7/16”
(11 mm)
Short 101⁄2” (242 mm) X 45⁄8” (117 mm)
3/4”
(19 mm)
7”
(178 mm)
5/8”
(16mm)
Retrofit Plate 101⁄16” (256 mm) X 33⁄4” (95 mm)
3/8”
(9.5 mm)
63/4”
(171 mm)
Indoor/Outdoor
Indoor/Outdoor
Stainless Steel
PVD Satin Brass
061-513072-630
061-513072-906
7/8”
(22 mm)
Retrofit Plate II 107⁄8” (277 mm) X 45⁄8” (118 mm)
15/16”
(34 mm)
75/8”
(194 mm)
Indoor/Outdoor
Indoor/Outdoor
Stainless Steel
PVD Satin Brass
061-513490-630
061-513490-906
7/16”
(12 mm)
Wrap plates Plated C.R. Steel, Solid Brass, Stainless Steel. Mounting screws and washers included. Non-handed.
All plates are 1/32” (0.8 mm) thick.
Wrap 13/4” (44 mm) X 1511/16” (399 mm) X 51/2” (140 mm)
Standard (ASM) Mortise 11/4” face plate for RT Series
Mortise
Compatible with inside trim
for Messenger/Bluetooth
136
Indoor
In/Outdoor
Satin Brass
Stainless Steel
062-513075-906
062-513075-630
Saflok Product Catalog / Order Guide
I don't have the PSD to remove lock
137
Saflok Product Catalog / Order Guide
Confidant RFID
Decorative Plates
Specifications:
Mounting screws and washers included where applicable. All plates are 1/32” (0.8 mm) thick.
(90mm)
3 9/16”
(15mm)
9/16”
(15mm)
9/16”
Location
Retrofit Plate
313mm x 90 mm
Finish
Plate Number
Indoor/Outdoor
Indoor / Outdoor
Satin Chrome
Satin Brass
061-514185-630
061-514185-906
Indoor/Outdoor
Indoor / Outdoor
Satin Chrome
Satin Brass
061-514185-2630
061-514185-2906
Indoor
Indoor
Satin Chrome
Satin Brass
061-514185-4630
061-514185-4906
Indoor/Outdoor
Indoor / Outdoor
Satin Chrome
Satin Brass
061-514185-3630
061-514185-3906
(313mm)
12 5/16”
(165mm)
6 1/2”
(15mm)
9/16”
(15mm)
9/16”
Retrofit Plate II
(90mm)
3 9/16”
425 mm x 90 mm
Suggested for Vingcard retrofit
(127mm)
5”
(425mm)
16 3/4”
(165mm)
6 1/2”
(15mm)
9/16”
(90mm)
3 9/16”
Retrofit Plate II for Bluetooth/
Messenger (inside side only)
(15mm)
9/16”
(127mm)
5”
425 mm x 90 mm
Suggested for Vingcard retrofit
(425mm)
16 3/4”
(165mm)
6 1/2”
(15mm)
9/16”
(15mm)
9/16”
Retrofit Plate III
(90mm)
3 9/16”
(52mm)
21/16”
(350mm)
13 3/4”
(165mm)
6 1/2”
(15mm)
9/16”
138
350mm x 90mm
Suggested for Cisa &
Onity retrofit Plate
Saflok Product Catalog / Order Guide
Miscellaneous Plates
Ordering
Door Filler Plates
Hole Filler Plates
Deadbolt Wrap-Around Plate
Dimensions
Finish
Part Number
23/4” x 11/8” (70 x 29 mm)
21/4” x 11/8” (57 x 24 mm)
21/4” x 11/8” (57 x 29 mm)
Prime Coat Steel
Prime Coat Steel
Brass Plated Steel
061-507858
061-507857
061-507856
23/8” (60 mm) Diameter 23/8” (60 mm) Diameter Silver Coated
Brass Plated Steel
061-507860
061-507859
41/4” (H) x 41/2” (W) for 13/4” door
(108 x 177 x 44 mm)
Stainless Steel
061-507862
Stainless Steel/ Matt black plastic facia
062-511383
dormakaba Card Reader Retrofit Kit
(Upgrades to dormakaba card reader from Ilco card reader)
Reversable Card Reader Not included
139
Saflok Product Catalog / Order Guide
Strikes for Saflok RT Series
Ordering
Standard Mortise Strikes
All strikes include mounting screws. For strikes only, omit the “K” from the product number. Left Hand Reverse Door
requires Right Hand Strike. Right Hand Reverse Door requires Left Hand Strike
* Standard 47⁄8” (124 mm)
Handing
Finish
Part Number
Left Hand
Right Hand
Left Hand
*Right Hand
Satin Brass
Satin Brass
Stainless Steel
Stainless Steel
504131-606-K
504132-606-K
504131-630-K
504132-630-K
Left Hand
Right Hand
Left Hand
Right Hand
Satin Brass
Satin Brass
Stainless Steel
Stainless Steel
502815-606-K
502816-606-K
502815-630-K
502816-630-K
Left Hand
Right Hand
Left Hand
Right Hand
Satin Brass
Satin Brass
Stainless Steel
Stainless Steel
502780-606-K
502781-606-K
502780-630-K
502781-630-K
Left Hand
Right Hand
Left Hand
Right Hand
Satin Brass
Satin Brass
Stainless Steel
Stainless Steel
506102-606-K
506103-606-K
506102-630-K
506103-630-K
*Strike included with the lock at no charge, unless otherwise specified.
Non-creditable unless purchased separately.
Wide Lip 47⁄8” (124 mm)
Long 6 3/4” (171 mm)
Extra Long 8 1/2” (216 mm)
140
Saflok Product Catalog / Order Guide
Strikes for Saflok RT Series
Ordering
Mortise Strikes
All strikes include mounting screws.
For strikes only, omit the “K” from the product number.
Left Hand Reverse Door requires Right Hand Strike.
Right Hand Reverse Door requires Left Hand Strike.
Handing
Finish
Part Number
ASM/AMM 12” (305 mm)
Dust box not included
Left Hand
Right Hand
041-512197-XXXK
041-512198-XXXK
Replace XXX by 606 for
Satin Brass and 630 for
Stainless Steel
Smoke Seal 47⁄8” (124 mm)
Dust Box not included
Left Hand
Right Hand
Left Hand
Right Hand
Satin Brass
Satin Brass Stainless Steel
Stainless Steel 041-508275-606K
041-508276-606K
041-508275-630K
041-508276-630K
Slim Mortise Strike ESM 71⁄4” (180 mm)
with deadbolt
Universal (Reversible)
Satin Brass Stainless Steel 041-510141-606K
041-510141-630K
Cylindrical Unit Strike T-Strike 23⁄4” (70 mm)
(Dust box not included)
Satin Brass
Satin Chrome
032-512389-606
032-512389-626
Cylindrical Unit Strike 7/8” ASA Strike (124 mm)
(Dust box not included)
Satin Brass
Satin Chrome
204119-606-K
204119-626-K
141
Saflok Product Catalog / Order Guide
Miscellaneous Parts for
Saflok RT Series
Ordering
Description
Outdoor Kit
Includes: Outside housing gasket, Stainless Steel battery holder screw
Part Number
033-512017-1
Weather Protection Cover for lock
032-510573
ADA Thumbturn Adapter - Black Finish
Suggested for handicap adapted rooms
Extended 83/4” Face Plates for
Standard 13⁄4” ASM Mortise
With deadbolt cutout
Without deadbolt cutout
062-510211-622
041-511907-630
041-511908-630
ESM Face Plates
13/16” (20 mm) round faceplate
With deadbolt cutout
Without deadbolt cutout
29/32” (23 mm) round faceplate
With deadbolt cutout
Without deadbolt cutout
Replace XXX by 630 (Stainless Steel) or 605 (Bright Brass PVD)
Thick Door Kit
Includes: (3) mounting screws, (1) lock lever spindle and (1) thumbturn spindle
For Door thickness 2.5” - 3.75” (66 mm-95 mm)
Replace XXX by 606 for Satin Brass or 626 for Satin Chrome
Torx Bit (T-15)
For battery holder screw
Mortise Stabilizer Bracket
Hollow Metal Door 11⁄4” (31 mm)
Hollow Metal Door 1” (25 mm)
128/508593-D630
128/508593-O630
128/508595-D630
128/508595-O630
062-512868-XXX
138-510294
50567701045
505677101045
Deluxe Screw Cover (Set for two (2) locks)
Includes: screw, washer, snap screw retaining ring, snap screw cap
Chrome062-510852-CR
Brass062-510852-BR
For standard door thickness only.
ASM Reverse Handing Tool
For use when changing the handing of reversible ASM (set of 2)
Tool to Remove E-760 lever
For E-760 Electronic & Key override
Mortise Gauge for System 700 retrofit
027-510382-K
138-510576
138-510476
142
Saflok Product Catalog / Order Guide
Miscellaneous Parts for
Saflok RT Series
Ordering
Description
Part Number
Allen Keys
Allen Key 1/8” (3 mm) for inside housing & 710 lever screw
Allen Key 5/64” for battery cover and medallion screw
Hex Driver (Allen) 5/64”
138-507933
138-507930
138-507957
ADA Thumbturn (Black finish)
Screw included. Required for full ADA compliance of the lock.
062-508859-622
31⁄8”
Mortise Stabilizer (Bracket for 710, 710-II)
Hollow Metal Door 11⁄4” (31 mm)
Hollow Metal Door 1” (25 mm)
50567701045
505677101045
Spare Parts Box
Includes: Lever spring, spindle, cleaning card, medallion, battery holder, Allen keys, screw kit
Solitaire 710-II/SMART
Solitaire 710 (includes 3 inside long levers)
Replace XXXX by door thickness and finish. Ex: 1606
062-511810-XXXX
062-508034-XXXX
Weather Resistant Kits
Solitaire 710-II062-510149
Inside gasket and outside gasket, reader cable gasket and Aerosol grease
Solitaire 710062-509009
Aerosol grease, outside gasket, inside gasket, reader cable gasket
SolitaireSMART062-511438
Aerosol grease, outside and inside gasket, reader cable gasket
Latch Extension (only for cylindrical lock)
For 33⁄4” (95 mm) backset with kick-off feature
For 5” (127 mm) backset without kick-off feature
For 5” (127 mm) backset with kick-off feature (S700 Pushbutton in knob)
* Also compatible with 760, 770 and 790 cylinder locks
Mortise Stabilizer Bracket (For 710,700 locks only)
Hollow Metal Door 11⁄4” (31 mm)
Hollow Metal Door 1” (25 mm)
062-511900
062-511901
062-511902
50567701045
505677101045
Weather Protection Cover for lock032-510573
143
Complementary Products
Saflok Product Catalog / Order Guide
Electronic In-Room Safe
Overview
In today’s wired world, people carry a wide array of expensive electronic devices, and they want a safe and secure place to
store them and other valuables when away from home. dormakaba has the solution with a complete line of in-room safes
that combine impeccable construction, security, and user-friendly operation. These safes are ideal for hotels, resorts,
apartments, student housing, offices, and more.
Fe­atures
Programmable Personal
Code Entry:
Guests choose their own personal four, five, or six-digit code to lock/unlock the safe.
Illuminated Keypad:
Makes it easy to read the numbers if safes are installed in closets.
Audit Trail:Two Options Available: the digital keypad can be prompted to report the last 12
entries; lets you print 100 entries, showing who used the safe and in which room.
Code BlockingBuilt into the keypad, it provides an additional safety measure against unauthorized
use. If someone tries to open the safe with an invalid pass code, the system will shut
down for 15 minutes.
Battery Override UnitAllows access to the safe if the guest forgets the pass code or if a battery failure
occurs, so no valuables are ever trapped inside the safe.
Electronic Master Key
(Protected Master Code)
Managers and security personnel each have a separate master code that allows them
to unlock the safe.
One-Touch Battery Audit
Instantly obtain battery conditions by touching the # key on the digital keypad.
Quick-Access Battery PanelBatteries are housed in a special slide panel inside the door for easy access. There is no
need to remove the entire door cover to access the batteries.
Handheld Programmer (ECU)The Electronic Control Unit (ECU) is an easy-to-use handheld unit that serves as a
programmer and password-protected maintenance unit for all safes. It can be used to
obtain an access audit trail and as an emergency unit to unlock the safe, if necessary.
Optional Features
Electronic Keypad OnlyProvides guests with digital access for locking and unlocking the safe. A guest chooses
his/her own personal four-, five-, or six-digit code, enters it on the keypad, shuts the
door, and presses the close button for secure locking
Electronic Keypad with
Credit Card Swipe Instead of remembering numbers, guests may use their credit card or any type of
magnetic stripe to lock/unlock the safe.
Electronic Keypad with
Credit Card Swipe and Mechanical Key Override
In case of emergency, a master key can be used to unlock the safe. All electronic safes
come with an electronic override.
Mechanical Key
Operation Only
Uses the state-of-the-art Medeco key and cylinder locking system
145
Saflok Product Catalog / Order Guide
Electronic In-room Safe
Ordering
D
H
ABC
DEF
GHI
JKL
MNO
PRS
TUV
WXY
1
4
7
2
5
8
3
6
9
OPER
0
W
Safe with Oval Keypad
Standard Model (Example)
2
1
Model
0
D
I
I
R
Box Size
Locking Options
Box Color
Keypad Color
Handing
64
Build the model number with the desired options
2
21
1
64
Model
Box Size
Locking Options
Box Color
Keypad Color
Handing
Model
Box Size (HxWxD)
Locking Option
Box Color
Keypad Color
Handing
dormakaba
Electronic
In-Room Safe
0
D
I
I
R
2
DK
B
B
L
9” X 17” X 14” (229 X 432 X 330mm)
21 3/4” X 15” X 17” (553 X 381 X 4mm)
3
16 1/2” X 13 3/4” X 6 1/2” (337 X 311 X 324mm)
(Wall Safe)
4
8” X 19 1/2” X 15 1/2” (203 X 495 X 394mm)
(17” Laptop Safe)
7*
5 3/4” X 20” X 14” (140 X 508 X 356mm)
(Drawer Safe MKO Required)
* Available in “DK” locking option only
146
Oval Keypad, Code Only
Oval Keypad, Code Only,
Key Override
Ivory
Black
S
Silver
Ivory
Black
S
Silver
Right Handed
Left Handed
64
Saflok Product Catalog / Order Guide
Electronic In-room Safe
Components
In-room Safe Accessories
Item
Description
Part #
Electronic Control Unit (ECU)
One included FREE with order of 100 safes or more
063-512434
9” Pedestal
Height: 9” (229mm) Weight: 3 lbs. (1 kg)
050-512432
13.5” Pedestal
Height: 131/2” (343mm) Weight: 3.5 lbs. (1.5 kg)
050-512433
3
12
1
6
15
4
7
9
18
19
#
147
Saflok Product Catalog / Order Guide
Keycards & Printing
Generic Keycards, Custom Keycards, Cleaning Supplies, etc.
dormakaba offers a full range of generic and custom
keycards, as well as cleaning supplies and replacement
batteries, to support its lodging access controls.
enjoyyour stay
These supplies are available from our online store,
www.Saflokstore.com.
Keycard Specifications
Features
Technology
Card Dimensions
•Manufactured under stringent ISO
guidelines
•Magstripe
•Smart
•RFID
•Finished card size:
2 1/8” x 3 3/8” (54 mm x 86 mm)
•Finished card thickness:
.030” (0.76 mm)
*If your lock system is not listed,
please contact our customer service
department for compatibility
information. Samples are available
upon request for testing. Not available
for RFID
Options
•Generic keycard design
•Chain Logo keycards
•Custom keycard design
Certifications and Approvals
•ABA (American Bankers Association)
Compatibility*
dormakaba keycards are compatible
with the following electronic hotel
lock systems:
•ILCO
•Saflok
•Sargent System 45
•Tesa / Onity
•Timelox
•Vingcard
Major Chain Logo Card
Your key to faster free nights.
Available for immediate shipping
Please call 1-800-999-6213 / +1-248-837-3700 or visit
www.Saflokstore.com for online purchasing
Custom Keycard Design
We will develop a custom look for your establishment.
See examples:
kaanapalialii.com
& Conference Center
Enjoy your stay...
Insert & Remove
593 (7) 298-0074
Custom Printed Keycards
An excellent way to promote special events, restaurants, sports facilities and other hotel services or to set your
establishment apart from others, custom printed keycards can be an important part of your business strategy.
Saflok offers complete design and printing services for your custom keycard needs.
148
Saflok Product Catalog / Order Guide
Generic Keycards
Ordering
Description
Part #
Magstripe
10100-600
Front
Two colors with arrow
Back
No pictogram, Blank
Front
Back
Generic Keycards (RFID)
Description
Part #
Mini Mifare - Guest keycard
No audit trail
10950
Front
Four Colors
Back Pictogram
Final keycard artwork may be different.
Front
1K Mifare - Staff keycard
P/N 10950
Back
Audit trail
10990
Front
Four Colors
Back
Pictogram
Front
Final keycard artwork may be different.
P/N 10990
Back
4K Mifare - Staff keycard
Audit trail
10910
Front
Four Colors
Back
Pictogram
Final keycard artwork may be different.
Front
P/N 10910
Back
1K Mifare - FOB
Audit trail RED: 10620-1-RD
BLUE: 10620-1-BL
YELLOW: 10620-1-YL
1K Mifare - Wristband
Audit trail RED: 10630-1-RD
BLUE: 10630-1-BL
YELLOW: 10630-1-YL
Custom keycards and other wristband and fob colors are available. Call customer support for pricing and availability.
149
www.dormakaba.com
M3621_11_2017
Subject to change without notice
Toll Free: 1.800.999.6213
International: + 1.248.837.3700
www.kabalodging.com
www.Saflokstore.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement