Section 4: Racks & Cabinets Sub-Section Page Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134 Wall Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 Rack Shelves, Enclosures, Lockboxes, Etc . . . . . . . . . . . . . . . . . . . . . . . . . . .144 Rackmount Power Strips & Surge Protection . . . . . . . . . . . . . . . . . . . . . . . . . .149 Rack Wire Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153 Hardware & Misc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 Racks & Cabinets Descriptive information herein supplied directly by individual manufacturers. Not responsible for opinion-oriented information or typographical errors. Not all products may be in stock or available to all EDGE members. Price is subject to change without notice. Restrictions may apply. We reserve the right to limit quantities to stock on hand. 133 Racks & Cabinets - Freestanding WRK Series 19" Gangable Rack Enclosures Designed for use when multiple racks need to be joined or when open sides are desirable for easy access to cables and components. Wide design is ideal when mounting equipment that demands space for substantial cable bundles. 2500 lb. weight capacity. 14-gauge steel tops and bottoms, 16-gauge seamless steel sides, and 11-gauge thickness where the rail brackets are welded to the sides. Laser cut 1/8" thick internal braces. Large cable bundles can easily be passed under or over the standard keylocked door with rear plate removed. **Available without rear door - suffix part number with 'LRD'. Part # Type WRK-24-27 WRK-37-27 WRK-40-27 WRK-44-27 27 27 27 27 ** 1/2" 1/2" 1/2" 1/2" outside outside outside outside depth depth depth depth Racking Height Overall Height 42" (24 space) 64 3/4" (37 space) 70" (40 space) 77" (44 space) 48 70 76 83 1/8" 7/8" 1/8" 1/8 AXS Slide Out System in Steel Host Enclosure Gain unrestricted access to equipment and cabling. Select an AXS when space-limited environments require equipment bays to be placed up against a wall or back to back. The patented pull-out design is ideal for access to rear equipment connections. Entire bays of equipment can be rolled out for service and installation flexibility. Available with 20" and 26" frame depths. 650 lb. weight capacity with proper weight distribution. Rack frame heights range from 32 to 41 spaces. Telescoping service stand elevates service tracks to bottom of AXS, allowing it to pull out. Host enclosure can be pre-installed on-site while detachable rack frame is integrated with equipment off-site, simplifying installation. Articulating carriers attach to rack frame for effective cable management. Uses long power strips. Each enclosure includes: modified welded cabinet, assembled rack frame, 2 triple hinged cable carriers, internal system base and 2 top restraining leashes. Useable Racking Height Part # MRK-4426AXS WRK-SA Series 19" Stand-Alone Rack Enclosures Select WRK-SA when mounting equipment that demands space for substantial cable bundles. Fully welded construction provides a 2,500 lb weight capacity. 14-gauge steel tops and bottoms, 16-gauge seamless steel sides and 11-gauge thickness where the rail brackets are welded to the sides. Finished in a durable black textured powder coat. **Available without rear door, suffix part number with 'LRD'. 71 3/4" (41 space) 64 3/4" (37 space) 59 1/2" (34 space) 71 3/4" (41 space) 64 3/4" (37 space) 59 1/2" (34 space) 71 3/4" (41 space) 64 3/4" (37 space) 59 1/2" (34 space) 71 3/4" (41 space) 71 3/4" (41 space) 71 3/4" (41 space) 56" (32 space) MRK-4026AXS MRK-3726AXS MRK-4431AXS-26 MRK-4031AXS-26 Part # 32 1/2" Outside Depth Racking Height Overall Height MRK-3731AXS-26 WRK-40SA-27 WRK-37SA-27 WRK-24SA-27 WRK-40SA-32 WRK-37SA-32 WRK-24SA-32 70" (40 space) 64 3/4" (37 space) 42" (24 space) 76 1/8" 70 7/8" 48 1/8" MRK-4426AXS-Z4 MRK-4026AXS-Z4 MRK-3726AXS-Z4 WRK Series 19" Network Enclosures Featuring a locking, smoked plexiglass front door finished in either a neutral putty color or black. Inside, 2 pairs of infinitely-adjustable 11gauge, 10-32 threaded rackrail, with numbered spaces are located front and rear. Removable plates cover a number of cable entry points. Abundant ventilation points are provided. Items standard include removable side panels with handles, a solid locking rear door, removable vented roof panel, and leveling feet. Convenient ganging holes allow racks to be connected in a multi-bay configuration. UL Listed and compliant with all EIA/TIA standards. Accommodates vertical power strips XL (extra-long), L (long) or S (short). Overall height is 83 1/8". Racking height is 77" (44 space). Part # Color Depth WRK-44-27NK WRK-44-27NKP WRK-44-32NK WRK-44-32NKP Black Putty Black Putty 27 27 32 32 1/2" 1/2" 1/2" 1/2" WRK/WRK-SA Additional Rail Kits Solid 11-gauge, extra-wide face, 10-32 threaded rail facilitates lacing, while generously large openings are provided for passing cable through. All mounting hardware included, sold in pairs. EIA Compliant. Part # Description Type WRK-RR24 WRK-RR37 WRK-RR40 WRK-RR44 24 37 40 44 10-32 10-32 10-32 10-32 134 space additional rail kit space additional rail kit space additional rail kit space additional rail kit threaded threaded threaded threaded WRK-44SA-27AXS WRK-44SA-32AXS-26 ERK-4425AXS ERK-3525AXS Overall Height Frame Depth Seismic Rated 83 1/8" 20" No 76 1/8" 20" No 70 7/8" 20" No 83 1/8" 26" No 76 1/8" 26" No 70 1/8" 26" No 83 1/8" 20" Yes 6 1/8" 20" Yes 70 7/8" 20" Yes 83 1/8" 20" No 83 1/8" 26" No 81 1/8" 20" No 65 3/8" 20" No MRK Series Gangable Rack Enclosures Designed for use when multiple racks need to be joined, or when open sides are desirable for easy access to cables and components. Slim, space saving design is ideal when floor space is an issue. Fully welded construction provides a 2500 lb. weight capacity. 14-gauge steel tops and bottoms, 16-gauge seamless steel sides, and 11-gauge thickness where the rail brackets are welded to the sides, each model is equipped with laser cut 1/8" thick internal braces made from structural steel. Finished in a durable black textured powder coat. Series 4426, 4431, 4436, 4442, 4042 available without rear door - suffix part number with 'LRD'. 26 1/2" Outside Depth 31 1/2" Outside Depth 36" Outside Depth 42" Outside Depth Racking Height” (space) Overall Height” MRK-4426 MRK-4026 MRK-3726 MRK-2426 MRK-4431 MRK-4031 MRK-3731 MRK-2431 MRK-4436 MRK-4036 - MRK4442 MRK-4042 - 77 70 64 42 83 76 70 48 MRK Additional Rail Kits Part # Description MV-RR24 MV-RR37 MV-RR40 MV-RR44 24 37 40 44 space space space space additional additional additional additional rail rail rail rail kit kit kit kit (44) (40) 3/4 (37) (24) 1/8 1/8 7/8 1/8 Racks & Cabinets - Freestanding MRK Series Gangable Rack Enclosures (cont.) DRK Series Cable Management Enclosures (cont.) Additional Cage Nut Rackrail Accessories Part # Description Part # Description PROMRK-RR24 PROMRK-RR37 PROMRK-RR40 PROMRK-RR44 24 37 40 44 CBS-DRK-31 CBS-DRK-36 DPVFD-44 DRK19-RR44PRO Caster base fits 31" deep DRK Caster base fits 36" deep DRK Front vented plexy door for DRK racks. Black finish. Additional cage nut style rackrail for DRK 19" panels with racks. 44 space. space space space space VMRK-54 19" Video Rack Enclosure Provides 54 spaces of racking height while still maintaining a slim 22" standard width. 14-gauge steel top and bottom, 16-gauge steel sides, and an 11-gauge structural thickness where the rackrail brackets are welded to the sides. Equipped with laser cut 1/8" thick internal braces made from structural steel. Fully welded construction provides a substantial 2500 lb. weight capacity. 1/2", 3/4", 1", and 1 1/2" electrical knockouts and UHF/VHF antenna knockouts. Two pairs of numbered 10-32 threaded "Z-rail" are standard equipment, as is a solid latching rear door. Optional horizontally split side panels. Part # Racking Height Overall Height Power Strip VMRK-54 94 1/2" (54 space) 100 5/8" XL, L, M, S ERK Series 19" Stand-Alone Rack Enclosures Fully welded construction combined with 16-gauge steel tops, bottoms, and sides, provides a 2500 lb. capacity. Keylocking solid rear door and laser cut 1/8" thick interior braces made from structural steel. Removable rear plates have 1/2", 3/4", 1", and 1 1/2" knockouts and UHF/VHF antenna knockouts. Large cable entry is found in the bottom, while an open top design on 44, 40, and 35 space sizes accepts a variety of options. 27, 21, and 18 space sizes feature a solid top with two laser knockouts that accept 4 1/2" fans. Front 11-gauge, 10-32 threaded rackrails which have numbered rackspaces and are fully adjustable. Superior ventilation is provided at front and sides. Finished with a textured black powder coat. UL Listed. Accommodates vertical power strips L (long), M (medium) or S (short). Available without rear door, suffix part number with 'LRD'. Additional Z-Rail 54 space additional 10-32 threaded Z-rail pair Part # Part # VRR-54 ERK-1820 DRK Series Cable Management Enclosures Designed to provide solutions to high-density cable-management challenges. Featuring a 30" wide footprint. Available in 19", 23" and 24" panel widths. Fully welded construction provides a substantial 1000 lb. weight capacity while 14-gauge steel top and bottom, onepiece steel sides, and four front to rear 1/8" thick structural steel internal braces. Includes fully-adjustable front and rear rackrail, a reversible vented rear door, and a standard top which comes with an opening to accept a 10" fan. 100 Rack screws are included. ERK-2120 ERK-2720 ERK-3520 ERK-4020 ERK-4420 Enclosures Racking height - 77" (44 space). OD height - 83 1/2". OD width - 30". Accommodates extra long, long and short vertical power strips. Available less rear door. To order, suffix part number with 'LRD'. Part # Panel Width DRK19-44-31 19" DRK19-44-31K 19" DRK19-44-31PRO 19" DRK19-44-36 19" DRK19-44-36PRO 19" DRK19-44-42 19" DRK19-44-42PRO 19" DRK23-44-31 23" Rackrail 10-32 Threaded on EIA standard spacing 10-32 Threaded on EIA standard spacing Square hole (cage-nut style) on EIA standard spacing 10-32 Threaded on EIA standard spacing Square hole (cage-nut style) on EIA standard spacing 10-32 threaded on EIA standard spacing square hole (cage nut style) on EIA standard spacing 10-32 Threaded on EIA standard spacing Useable Depth OD Depth 24.25" 31 1/2" 24.25" 31 1/2" 24.25" 31 1/2" 28.75" 36" 28.75" 36" 34.75" 42" 34-3/4" 42" 28.25" 31 1/2" Outside Depth (Useable) Racking Height Overall Height Power Strip 20" (18 15/32") 20" (18 15/32") 20" (18 15/32") 20" (18 15/32") 20" (18 15/32") 20" (18 15/32") 31 1/2" (18 space) 36 3/4" (21 space) 47 1/2" (27 space) 61 1/4" (35 space) 70" (40 space) 77" (44 space) 35 5/8" S $45.25 40 7/8" S $45.25 51 3/8" M, S $98.65 65 3/8 L, M, S $78.58 74 1/8" L, M, S $98.65 81 1/8" L, S $98.65 Price ERK Caster Bases Skirted for aesthetics, each ERK caster base comes with 3" diameter swivel wheels preinstalled. Raises total rack height by 3 3/4". Part # Fits CBS-ERK-20 CBS-ERK-25 20" deep ERK series 25" deep ERK series ERK Series Rail Kits 11-gauge, 10-32 threaded, sold in pairs. All mounting hardware included. Part # Description ERK-RR18 ERK-RR21 ERK-RR27 ERK-RR35 ERK-RR40 ERK-RR44 18 21 27 35 40 44 space space space space space space rear rear rear rear rear rear rail rail rail rail rail rail kit kit kit kit kit kit Top Rail Option Ideal for mounting panels or equipment in the top openings of racks, it includes a pair or 11-gauge, 10-32 threaded rackrail, mounting angles, and hardware. Top rail is recessed 1/8" from top or rack when installed. Fits WRK, MRK, VRK and VMRK series. Rack space is 22 3/4" (13 space). Part # MW-TR 135 Racks & Cabinets - Freestanding Desktop Rail Racks Offered in 8 and 12 space sizes, both models extend upward at a gentle slope. Overall width is 19 1/8", depth is 11 1/2". Part # Racking Height Overall Height DR-12 DR-8 21" (12 space) 14" (8 space) 22 3/4" 15 3/4" Universal Cabinet Top Options All MW Series tops include a 2 rackspace removable service plate allowing cable bundle entry or use of rack panels. The MW-4FT and ERK-4FT feature laser knockouts to accommodate up to 4 or 3 fans respectively. Universal Cabinet Front Doors (cont.) Part # Door Type No. of Rack Spaces VFD-44 VFD-54 Solid Door Solid Door 44 54 Universal Cabinet Side Panels SPN series panels fit all WRK, MRK, VRK, VMRK and DRK Series enclosures. These side panels feature stylish beveled corners to match the aesthetics of the enclosure, easily lift on and off, and include an internal locking kit. Black textured powder coat finish. Sold in pairs. Each side panel adds 5/8" to overall width. Part # Style Fits Series MW-10FT Mounts one 10" fan WRK, MRK, VRK, VMRK, DRK Part # Fits WRK, MRK, VRK, VMRK MW-4FT Mounts four 4 1/2" fans (MW4FT) or three 4 1/2" fans (ERK-4FT) WRK, MRK, VRK, VMRK, DRK MW-ST Solid WRK, MRK, VRK, VMRK, DRK MW-VT Vented WRK, MRK, VRK, VMRK, DRK SPN-24-267 SPN-24-312 SPN-37-267 SPN-37-312 SPN-40-267 SPN-40-312 SPN-44-267 SPN-44-312 SPN-44-36 SPN-54-312 24 space 26" and 27" deep 24 space 31" and 32" deep 37 space 26" and 27" deep 37 space 31" and 32" deep 40 space 26" and 27" deep 40 space 31" and 32" deep 44 space 26" and 27" deep 44 space 31" and 32" deep 44 space 36" deep Fits VMRK-54 only (4 pcs.) Universal Cabinet Front Doors Offered in lightly smoked plexiglass, fully vented, and solid configurations. Beveled corners provide a stylistically modern appearance, while hinging either left or right. Black textured powder coat finish. Includes keylock. Fits WRK, MRK, VRK, VMRK, ERK, DWR, SR Series. Part # Door Type No. of Rack Spaces FD-10 FD-12 FD-16 FD-18 FD-21 FD-24 FD-27 FD-35 FD-37 FD-40 FD-44 FD-54 PFD-10 PFD-12 PFD-16 PFD-18 PFD-21 PFD-24 PFD-27 PFD-35 PFD-37 PFD-40 PFD-44 PFD-54 PVFD-44 VFD-10 VFD-12 VFD-16 VFD-18 VFD-21 VFD-24 VFD-27 VFD-35 VFD-37 VFD-40 Solid Door Solid Door Solid Door Solid Door Solid Door Solid Door Solid Door Solid Door Solid Door Solid Door Solid Door Solid Door Plexi Door Plexi Door Plexi Door Plexi Door Plexi Door Plexi Door Plexi Door Plexi Door Plexi Door Solid Door Solid Door Solid Door Vented plexi door Solid Door Solid Door Solid Door Solid Door Solid Door Solid Door Solid Door Solid Door Solid Door Solid Door 10 12 16 18 21 24 27 35 37 40 44 54 10 12 16 18 21 24 27 35 37 40 44 54 44 10 12 16 18 21 24 27 35 37 40 136 19" Steel Relay Racks Incorporating a self-squaring, self-leveling design which greatly speeds assembly. Racks come threaded 10-32 or 12-24. Channels made from 11-gauge steel to provide extra strength. Top rails accommodate standard cable ladders. Optional cantilver support base adds stability when installing deep equipment. Finished in black powder coat, 50 rack screws are included. Note: When mounting vertical power strips, part number PB-5A (mounting brackets) are required. TIA/EIA compliant. Part # Type Overall Height Racking Height Power Strip* RL10-38 RL10-45 RL12-45 10-32 thread 10-32 thread 12-24 thread 72" 84" 84" 38 space 45 space 45 space L, M, S L, M, S L, M, S CSB Cantilever Support Base Measuring 18" deep, the CSB cantilever support base adds stability to any RL Series relay rack. Especially helpful for installations where flush mounted cantilever shelves are used to mount heavy equipment and the center-of-gravity is shifted to the rear of the rack. Black powder coat finish. TIA/EIA compliant. Part # CSB Aluminum Relay Rack Constructed from 3/16" extruded aluminum uprights that are 12/24 threaded front and rear. Heavy duty 1/4" thick aluminum base is 15" deep for stability and includes holes for securing to floor. Heavy duty 1/4" thick aluminum top angle. Aluminum relay racks comes in silver brushed aluminum finish or black powder coat and include 25 rackscrews. Note: When mounting vertical power strips, part number PB-5A (mounting brackets) are required. TIA/EIA compliant. Part # Panel Width Qty Racking Height Power Strip* Finish RLA19-1245 RLA19-1245B RLA23-1245 19" 19" 23" 1 1 1 45 space 45 space 45 space L, M, S, XS L, M, S, XS L, M, S, XS Silver Black Silver Racks & Cabinets - Freestanding RK/BRK Series 19" Equipment Racks Constructed with 5/8" furniture-grade MDF board. Assembles easily with a provided allen wrench and driver bit. 11-gauge, 10-32 threaded rackrails come pre-installed. Add a caster kit for instant mobility, or simply use the provided feet for stationary applications. Two sizes offered: Models with 16" depths (available 2-20 spaces high), and 18" depths (available 8-20 spaces high), both with overall width of 20 3/8". Part # Racking Height Depth Overall Height Power Strip BRK12 BRK16 BRK20 BRK8 RK12 RK16 RK2 RK20 RK4 RK8 RKW 21" (12 space) 28" (16 space) 35" (20 space) 14" (8 space) 21" (12 space) 28" (16 space) 3 1/2" (2 space) 35" (20 space) 7" (4 space) 14" (8 space) Wheel kit-2 locking (adds 2 3/4" to height) 18" 18" 18" 18" 16" 16" 16" 16" 16" 16" - 22 1/2" 29 1/2" 36 1/2" 15 1/2" 22 1/2" 29 1/2" 5" 6 1/2" 8 1/2" 15 1/2" - S S - Slim 5 Series 19" Equipment Racks Built using a patented bolt-together design. As strong as a welded cabinet, each enclosure is equipped with 2 pairs of fixed 11-gauge, 10-32 threaded rackrail front and rear, features heavy-duty 14gauge (.078) steel top and bottom, as well as 1/2" and 3/4" rear electrical knockouts. Capable of being ganged together with or without an optional cable chase kit, Slim 5 racks are complimented by a number of available options offering added versatility and aesthetic appeal. 19 1/8" overall width. EIA compliant. Part # 5-8 5-8-26 5-14 5-21 5-21-26 5-29 5-29-26 5-37 SRK 19" Rolling Equipment Rack Standing 54 1/4" high and measuring 16" deep, the SRK rolling rack houses 16 vertical spaces on the bottom and 12 spaces on its sloped top. Built using 5/8" furniture-grade MDF board finished with a black laminate, each unit includes pre-installed 11-gauge rackrail and casters. Assembly is easy with supplied hardware. Accommodates vertical power strips medium and short. To install power strips, quick-clips must be screwed to sides, or PB-5A (mounting brackets) used on optional rear rackrail. 5-37-26 5-43 5-43-26 5-14-26 Part # SRK OSR16 OSR24 Overall Height Weight Capacity Power Strips 14" (8 space) 14" (8 space) 24 1/2" (14 space) 36 3/4" (21 space) 36 3/4" (21 space) 50 3/4" (29 space) 50 3/4" (29 space) 64 3/4" (37 space) 64 3/4" (37 space) 75 1/4" (43 space) 75 1/4" (43 space) 24 1/2" (14 space) 17 3/4" 17 3/4" 28 1/4" 400 lbs. 400 lbs. 400 lbs. 20" 26" 20" 40 1/2" 300 lbs. 20" 40 1/2" 400 lbs. 26" 54 1/2" 400 lbs. 20" 54 1/2" 400 lbs. 26" 68 1/2" 400 lbs. 20" 68 1/2" 400 lbs. 26" 79" 400 lbs. 20" 79" 400 lbs. 26" 28 1/4" 400 lbs. 26" Doors Two styles of Slim 5 doors (plexiglass and solid) are offered to suit the needs of any application. Capable of being installed with a right or left swing, all doors are equipped with a cam keylock and an attractive flush pull. A cable chase is required to install these doors in a multibay configuration. EIA compliant. OSR Series 19" Sloped Oak Racks The OSR Series racks feature a gently sloped rack face to facilitate equipment viewing. Utilizing the same attractive 3/4" oak laminate construction found on the OBRK Series, each OSR Series rack additionally features casters to enhance mobility. Factory-installed 11-gauge, 10-32 threaded rackrail is standard. Accommodates vertical power strips M (medium) or S (short). *Will not accommodate power strip with J-box. To install power strips, quick-clips must be screwed to sides or PB-5A (mounting brackets) used on optional rear rackrail. EIA compliant. Part # Racking Height Racking Height Depth at Top Depth at Bottom Overall Hght Power Strip 28" (16 space) 42" (24 space) 19 1/2" 23" 36 1/2" - 19 1/2" 23" 50 1/2" M*, S VRK Video Rack Enclosure Broadcast-standard 22" outside width and a robust 2500 lb. capacity. 14-gauge steel tops and bottoms, 16-gauge seamless steel sides, and an 11-gauge thickness where the rail brackets are welded to the sides. Equipped with laser cut 1/8" thick internal braces made from structural steel. Horizontal lacing bars made from 1/2" square tubing on 7" centers. Two pairs of wide 11-gauge, 10-32 threaded rail with numbered rackspaces. Laser knockouts for a one-gang electrical box. Vented latching rear door is standard, front doors are optional. Durable black textured powder coat. Accommodates vertical power strips XL (extra-long), L (long) or S (short). 77" (44 space) video/rack/horizontal bars. Outside depth (usable) is 31 1/2" (29"). Height is 83 1/8". XL, L, S power strip. Part # Door Type Fits DO-5-8 DO-5-14 DO-5-21 DO-5-29 DO-5-37 DO-5-43 DOP-5-8 DOP-5-14 DOP-5-21 DOP-5-29 DOP-5-37 DOP-5-43 Solid Solid Solid Solid Solid Solid Plexi Plexi Plexi Plexi Plexi Plexi 5-8 5-14 5-21 5-29 5-37 5-43 5-8 5-14 5-21 5-29 5-37 5-43 Part # VRK-44-31H 137 Racks & Cabinets - Freestanding Slim 5 Series 19" Equipment Racks (cont.) Slim 2 Series 19" Sloped Desktop Racks Adjustable "Split" Rear Rackrail Built to facilitate rear hanging of equipment, this Slim 5 option also permits panels to be "mid-mounted". All brackets, rails, and hardware are included. When using this option with ganged enclosures, a cable chase kit is required. Works with steel side panels only, will not accommodate wood side panels. EIA compliant. Fully Assembled Steel Frame with Laminate Sides Incorporates a sturdy black steel open frame and removable black laminate side panels. Sloping rack face for easy equipment viewing. Can be easily joined with the open sides and bottom allowing quick wire passage. Front and rear 11-gauge, 10-32 threaded rackrail is standard. EIA compliant Part # Fits 5AR14 5AR21 5AR29 5AR37 5AR43 5AR8 5-14 5-21 5-29 5-37 5-43 5-8 Removable Steel Side Panels Vented at top and bottom, the Slim 5 removable side panels are equipped with recessed lift handles and their own internal locking clips. Made from 18-gauge steel and finished in a durable black textured powder coat, each side panel adds 5/8" per side to the cabinet's overall width. Sold in pairs. EIA compliant. Part # Fits SP-5-14 SP-5-21 SP-5-29 SP-5-37 SP-5-43 SP-5-8 5-14 5-21 5-29 5-37 5-43 5-8 Cable Chase Kits When bolted between racks, each kit provides additional room for wiring and power distribution in multi-bay applications. Each 3 piece kit includes front, rear and top channels, as well as mounting hardware. This option is required when installing doors on multi-bay Slim 5 racks. EIA compliant. Part # Fits 5CC14 5CC21 5CC29 5CC37 5CC43 5CC8 5-14 5-21 5-29 5-37 5-43 5-8 Rear Access Pans Requiring less space than a conventional door, the rear access pans feature a unique no-hinge "tip-out lift-off" design. The bottom features a convenient laser knock-out for cable pass-through, securing keylock included. EIA compliant. Part # Fits RAP14 RAP21 RAP29 RAP37 RAP43 RAP8 5-14 5-21 5-29 5-37 5-43 5-8 138 Part # Racking Hgth Top Depth Bottom Depth Overall Hgth 2-10 17 1/2" (10 space) 14.1" 18" 19 3/8" KD Black Laminate Assembles quickly and easily with provided hardware. Constructed from high pressure black melamine. Sloping rack face for easy equipment viewing. Front and rear 11-gauge, 1032 threaded rackrail is standard. EIA compliant. Part # Racking Height Top Depth Bottom Depth Overall Hght 2-10M 17 1/2" (10 space) 10 1/2" (6 space) 14.7" 17.9" 19 5/8" 15.9" 17.9" 12 3/4" 2-6M OBRK Series Oak Racks 18" deep. Available in 8, 12, 16 and 20 space sizes. Assembles easily with concealed fasteners. Accommodates vertical power strips S (short). To install power strips, quick-clips must be screwed to sides or PB-5A (mounting brackets) used on optional rear rackrail. High quality 3/4" oak-laminate racks. Part # Racking Height Power Strip OBRK12 OBRK16 OBRK20 OBRK8 21" 28" 35" 14" S - (12 space) (16 space) (20 space) (8 space) PTRK Series Portable Racks Smooth-rolling 4" cushion casters and advanced cable management. Equipped with a front pair of infinitely adjustable 10-32 threaded 11-gauge rackrail with numbered rackspaces and smooth laser cut cable openings. Ruggedly welded 16-gauge steel construction and 1/8" thick laser cut corner braces. Robust 500 lb. capacity. Keylocked front and rear doors, spring loaded recessed handles, and a road-worthy black textured powder coat finish are standard. Accommodates vertical power strip S (short). *Will not accommodate power strip with J-Box. EIA compliant. Part # Racking Height Overall Height Power Strip PTRK-14 24 1/2" (14 spaces) - PTRK-21 36 3/4" (21 spaces) 33 3/4" (including casters) 46" (including casters) Optional Rear Rackrail Part # Description PTRK-RR14 PTRK-RR21 14 space optional rear rail kit 21 space optional rear rail kit S* Racks & Cabinets - Freestanding High Density Racking System The new Belden High Density Racking System gives you more real estate plus it restores manageability to your cabling. Moves, adds and changes are truly easy, saving you time and money. Total of 54 new racking system components and accessories. Four vertical manager styles. Each manager is easily modifiable into different configurations, including single-sided high density, double-sided high density, single-sided low density and double-sided high-and-low density. Two symmetrical manager half doors. Retention gates keep cables from popping out of place when doors are opened or removed. High Density Racking System (cont.) Vertical Manager Doors (1Pair) Part # Description BHDK03X BHDK06X BHDK10X BHDK12X 3-5/8"W, Black 6" W, Black 10" W, Black 12" W, Black Aluminum Relay Racks Horizontal Manager with Cover Part # Description BHRR194 BHRR234 Aluminum relay rack, 19" WX84" H, #12-24 tapped hole, Black Aluminum relay rack, 23" WX84" H, #12-24 tapped hole, Black Single-Sided High Density Vertical Manager Include (1) vertical manager, (2) 1/2 doors sections, (3) gates, (25) fasteners, (6) strap mounts, (2) retainer bars and mounting hardware. Part # Description BHVH003 BHVH006 BHVH010 BHVH012 High High High High density density density density with with with with doors, doors, doors, doors, 3-5/8" WX84" H, Black 6" WX84" H, Black 10" WX84" H, Black 12" WX84" H, Black Single-Sided Low Density Vertical Manager Include (1) vertical manager, (6) strap mounts, (8) gates, (25) fasteners (2) retainer bars and mounting hardware. Part # Description BHVL003 BHVL006 BHVL010 BHVL012 Low Low Low Low density density density density without without without without doors, doors, doors, doors, 3-5/8" WX84" H, Black 6" WX84" H, Black 10" WX84" H, Black 12" WX84" H, Black Double-Sided High Density Vertical Manager Include (2) vertical manager, (4) 1/2 doors sections, (6) gates, (50) fasteners, (12) strap mounts, (4) retainer bars and mounting hardware. Part # Description BHVHH03 BHVHH06 BHVHH10 BHVHH12 High High High High density density density density with with with with doors, doors, doors, doors, 3-5/8" WX84" H, Black 6" WX84" H, Black 10" WX84" H, Black 12" WX84" H, Black High/Low Density Vertical Manager Include (2) vertical manager, (2) 1/2 doors sections, (11) gates, (50) fasteners, (12) strap mounts, (4) retainer bars and mounting hardware. Part # Description BHVHL03 High/low Black High/low Black High/low Black High/low Black BHVHL06 BHVHL10 BHVHL12 density combination with front doors, 3 5/8"W x 84" H, density combination with front doors, 6"W x 84" H, Part # Description BHH191U BHH192U BHH193U BHH231U BHH232U BHH233U 19" 19" 19" 23" 23" 23" WX1U, WX2U, WX3U, WX1U, WX2U, WX3U, Black Black Black Black Black Black Transition Channel Part # Description BHTT196 BHTL196 BHTD196 BHTR196 Top transition channel, 19" WX6" D, Black Lower transition channel, 19" WX6" D, Black Lower transition channel double, 19" WX6" D, Black Transition tray (rack to rack) Accessories Additional accessories (filler panels, patch cords organizers, nylon and Velcro ties) available. Part # Description BHSK020 BHSP020 BHGL03X BHGL06X BHGL10X BHGL12X BHGR03X BHGR06X BHGR10X BHGR12X BHFS11U BHFB11U BHDB03X BHDB06X BHDB10X BHDB12X BHPF100 BHSM100 Slack management spool kit, Black Slack management spools (2) , Black Gate Kit, 3-5/8" W, Black Gate Kit, 6" W, Black Gate Kit, 10" W, Black Gate Kit, 12" W, Black Retention gate (6), 3-5/8" W, Black Retention gate (6), 6" W, Black Retention gate (6), 10" W, Black Retention gate (6), 12" W, Black Finger section, 11U, Black Rack mount finger bracket, 11U, Black Divider bar, 3-5/8" W, Black Divider bar, 6" W, Black Divider bar, 10" W, Black Divider bar, 12" W, Black Fastener for vertical manager (100) Tie mount for vertical manager (100) density combination with front doors, 10"W x 84" H, density combination with front doors, 12"W x 84"H, Vertical Manager Backcover Part # Description BHBC03X BHBC06X BHBC10X BHBC12X 3-5/8" W, Black 6" W, Black 10" W, Black 12" W, Black 19" Floor Racks All racks are provided with all assembly hardware and equipment mounting screws. The rails are tapped #12-24 front and rear in EIA compliant spacing. Designed with mounting holes which allow anchoring to the floor. Reinforced angled top brace supports. Meets or exceeds EIA-310D Standards. Part # RMS Height Load Capacity Color FR1903-20-03 FR1904-28-03 FR1907-45-03 20 28 45 3' 4' 7' 400 lbs. 500 lbs. 800 lbs. Aluminum Aluminum Aluminum 139 Racks & Cabinets - Freestanding 19" Floor Racks (cont.) Part # RMS Height Load Capacity Color FR1904-28-02 FR1907-45-02 28 45 4' 7' 500 lbs. 800 lbs. Black Black Adjustable 4 Post Floor Rack Cold rolled steel 14 AWG. Reinforced angled top brace supports. Complete with assembly hardware and set of #12-24 equipment screws. Meets or exceeds EIA-310D standards. Double tapped cage nut rails. Adjustable for 24", 28", 32" and 36" depth. Electrostatic microfinish paint. Height is 7'. 45 RU. Black. Width is 21". 1700 lbs load capacity. Part # FR1924-45-02 400 Series Floor Enclosures - 19" x 24" Size Group Feature louvered side and rear removable and keyed panels for increased air-flow and ventilation. Comes complete with dual fans, 4 (2 front, 2 rear) adjustable mounting rails tapped with EIA spaced #12-24 threading, casters, leveling feet, ground bus and lockable acrylic front door. Listed in ivory. For black, replace 01 with -02. Overall width is 22.5". Overall depth is 24". Internal depth is 21.5". Part # FE4019-20-01 FE4019-28-01 FE4019-34-01 FE4019-40-01 FE4019-45-01 RMS 20 28 34 40 45 Internal Height Load Capacity 3' 4' 5' 6' 7' 35" 47" 59.5" 70" 78.75" 630 650 700 730 830 lbs. lbs. lbs. lbs. lbs. 410 Series Floor Enclosures - 19" x 32" Size Group 19" mount floor enclosures are a 32" depth design which allow for deep dimensional mounting requirements. Manufactured to ANSI/EIA RS310-D standards. Feature louvered side and rear removable keyed panels offering easy access to equipment and cabling. Comes complete with dual fans, 4 (2 front, 2 rear) adjustable mounting rails tapped with EIA spaced #12-24 threading, casters, leveling feet, ground bus and lockable acrylic front door. Load capacity is 850 lbs. Part # Color RMS Overall HxWxD Internal HxD FE4119-45-01 FE4119-45-02 Ivory Black 45 45 7'x22.5"x32" 7'x22.5"x32" 78.75"x29.5" 78.75"x29.5" Mesh Door Design Floor Server Enclosure - 740 Series 27.5" x 42" Size Group Mesh front door design for airflow and heat dissipation. Vented on all panels for excellent air circulation characteristics. Top panel features cutouts for fans and cutouts for cable access. Platform features cutouts for cable access. Features 6 fully adjustable internal equipment cage nut rails for #12-24 mounting screws in EIA universal spacing. Comes with front door, rear and side panels, leveling feet, casters, grounding bus bar, 2 pre-installed 80 CFM fans and equipment screws. Electrostatic microfinish paint. Height RU Color FE7419-40-01 FE7419-40-02 FE7419-45-01 FE7419-45-02 6' 6' 7' 7' 40 40 45 45 Ivory Black Ivory Black RU RU RU RU Part # Height RU Color FE7019-34-01 FE7019-34-02 FE7019-40-01 FE7019-40-02 FE7019-45-01 FE7019-45-02 5' 5' 6' 6" 7' 7' 34 34 40 40 45 45 Ivory Black Ivory Black Ivory Black Part # RU Height Load Capacity OE9019-20-04 OE9019-28-04 OE9019-34-04 OE9019-40-04 OE9019-45-04 20 28 34 40 45 3' 4' 5' 6' 7' 580 650 700 730 780 RU RU RU RU RU lbs. lbs. lbs. lbs. lbs. NET-ACCESS™ Cabinet Combines the aesthetics and security of a cabinet with the accessibility of an open rack. The NET-ACCESS Cabinet provides superior cable pathway accessibility, improved thermal management and a fully integrated, electrically bonded cabinet. The modular design of the cabinet incorporates flexibility for future network/data center expansions resulting in greater network uptime and reliability, easier moves, adds and changes and lowest total cost of ownership. Part # Description CN1 32 x 41 x 84 inches (812.8 x 1041 x 2133.6 mm) WxDxH. Cabinet frame with top panel, Dual hinge perforated front door, Split perforated rear door, Solid side panels, #12-24 threaded equipment mounting rails, 45 RU cable management Dimensions: 32”W X 41”D X 84”H (812.8mm x 1041.4mm x 2133.6mm), Cabinet frame with top panel, Dual hinge perforated front door, Split perforated rear door, #12-24 threaded equipment mounting rails, 45 RU cable management Dimensions: 31.5"W X 40" D X 84"H (800mm x 1017mm x 2134mm), Cabinet frame with top panel, Split perforated front and rear doors, Solid side panels, #12-24 threaded equipment mounting rails, 45 RU cable management on front and rear of front posts CN2 CN4 CNPS CNBRFK CNSPE CNSPC CNSTR CNAE1 CNAE2 140 RU RU RU RU RU RU Outdoor Enclosure - 900 Series Designed to provide a degree of protection for enclosed equipment against falling dirt, rain, snow, sleet, windblown dust, splashing water, hose-directed water and corrosion. Includes casters for easy mobility. Features fully adjustable internal cage nut rails for #12-24 mounting screws in EIA universal spacing. Leveling feet included. Galvanized steel construction. Meets or exceeds NEMA 250 - protection 4X and EIA 310D. Finished with textured polyester material - highly corrosion resistant. Overall Height Part # Mesh Door Design Floor Enclosure - 700 Series 19" x 24" Size Group Width 22.5" - Depth 24". Mesh front door design for airflow and heat dissipation. Vented on all panels for excellent air circulation characteristics. Top panel features cutouts for fans and cutouts for cable access. Platform features cutouts for cable access. Features 4 fully adjustable internal equipment cage nut rails for #12-24 mounting screws in EIA universal spacing. Reversible front door. Meets or exceeds EIA 310D standards. Electrostatic microfinish paint. Removable cabinet solid side panel with lockable push button latches Cabinet cable management finger kit, 9 RU sections. Kit includes 5 left and 5 right finger sections to complete 45 RU on one side of post. Cable capacity of each RU is 48 Category 6 cables or 24 Category 6A cables Network cabinet end channel slack spool. Package includes left and right slack spools and mounting brackets Network cabinet center channel slack spool. Includes one center spool and one mounting bracket Network cabinet casters - Set of 4 Network cabinet air exhaust duct for high heat density configurations. Designed for Cisco 6509 switch Network cabinet air exhaust duct for high heat density configurations. Designed for Cisco 9513 switch Racks & Cabinets - Freestanding Equipment Racks Part # Description RR-48 Milled Finish, 10-32 Holes Black Finish, 10-32 Holes Milled Finish, 10-32 Holes Black Finish, 10-32 Holes RR-48B RR-84 RR-84B Outside Dim. inches (H x W x D) Rack Spaces 48 x 30.38 x 3.0 24 48 x 30.38 x 3.0 24 84 x 30.38 x 3.0 45 84 x 20.38 x 3.0 45 19" Server Cabinets Front door features a full length smoked and shatterproof glass door, reinforced with decorative metal frame. Pop up lock and three point locking mechanism. Mounting brackets allow for flexible configuration and adjustable depth. Multiple cable entry points on the roof and bottom of frame. Quick release, lockable and removable side doors with slam latches and locks. Powder coat paint finish. Leveling feet included. Vented top panel. Secure, locking front and back doors with spring loaded hinges for best accessibility. Removable doors for connecting cabinets. Reversible doors. Part # Description 673661 674261 40" Depth - 36 U, Black, 24 x 39.6 x 61.3 in. 40" Depth - 42 U, Black, 24 x 39.6 x 73.6 in. 19" Open Racks and Mini Rack 19" Mini-Rack Desktop or wall mountable mini rack. Designed for small LAN installations. 19 in. Wide. 7 in. High (4 U). 12 in. Deep (30 cm). 4U, Grey, 480mm x 300mm x 180mm (19 in. x 12 n. x 7 in.) Part # 167628 19" Free-Standing Cabinets Front features a full length smoked and shatterproof glass door reinforced with decorative metal frame. Pop up lock and three point locking mechanism. Mounting brackets allow for flexible configuration and adjustable in depth. Multiple cable entry points on the roof and bottom of frame. Quickly release, locable and removable side doors with slam latches and locks. Powder coat paint finish. Vented top panel. Secure, locking front and back doors with spring loaded hinges for best accessibility. Grounding kit included. Reversible doors. Leveling feet included. Part # Description 682266 683266 684266 684268 674768 23.5" 23.5" 23.5" 31.5" 31.5" Depth Depth Depth Depth Depth - 22U, Black, 24 x 24 x 38.5 in. 32U, Black, 24 x 24 x 56.1 in. 42 U, Black, 24 x 24 x 73.5 in. 42 U, Black, 24 x 30 x 73.5 in. 47 U, Black, 24 x 30 x 82.3 in. 2 Post - Single Frame Quick access to equipment. Designed to house 19" standard mounting devices. Modular design makes it easy to assemble and dismantle. Uprights can be used as a cable manager. Powder coat paint finish. Leveling feet included. Rigid, welded frame construction. Sturdy steel construction. Easy mounting, fast assembly. Part # Description 673601 674201 674801 36 U (63") 42 U (73.5") 48 U (84") 4 Post - Double Frame Use as single frame or double frame. Four point mounting accessories available. 42 U (73.5"). Part # 674200 10" Wall Mount SOHO Cabinet Pre-assembled. Front door features a full length smoked and shatterproof glass door reinforced with decorative metal frame. Two 10" adjustable mounting brackets. Multiple cable entry points on roof and bottom of frames. Easily re-mountable. Powder coat paint finish. Load carrying capacity: 35 lbs. Vented top panel. Rear panel can be used as a mounting plate. Sturdy steel construction. Black. Can be used as free standing. 11" High x 11" Deep. Part # 671006 Racks & Cabinets - Wall Mount WRP/WRS Series Low-Profile Wall Cabinets Wall-mounting deep routers and hubs. Unique design with 23" useable racking depth allows mounting of deeper equipment vertically in a parallel-to-the-wall orientation for space efficiency and aesthetics. Solid hinged body swings either left or right. Angled, hinged plexiglass (WRP Series) or solid steel (WRS Series) top cover allows convenient equipment access. Top cover keyed separately from body keylock, providing user access to equipment controls while limiting access to rear equipment connections. Finished in durable putty powder coat (WRP Series) or black textured powder coat (WRS Series). Weight capacity is 150 lbs. Putty Part # Black Part # Racking Height WRP-4 WRP-6 WRP-8 WRS-4 WRS-6 WRS-8 7 " (4 space) 10 1/2" (6 space) 14" (8 space) EWR Series Wall Mount Rack Use when installing smaller systems and an economical solution is required. Tool-Free Quick-Mount™ system for easy one-person mounting of the center section to the backpan on the jobsite. Welded construction provides 150 lb. weight capacity. Models available with solid locking front door (add SD to end of part number). Finished in a durable black textured powder coat. Reversible padlockable center section keyed separately from optional front door. Part # Depth Racking Height Overall Height EWR-8-17 17" deep (15" useable) 22" deep (20" useable) 17" deep (15" useable) 14" (8 space) 21" 14" (8 space) 21" 17 1/2" (10 space) 24 1/2" EWR-8-22 EWR-10-17 141 Racks & Cabinets - Wall Mount EWR Series Wall Mount Rack (Cont.) Part # Depth EWR-10-22 22" deep able) 17" deep able) 22" deep able) 17" deep able) 22" deep able) EWR-12-17 EWR-12-22 EWR-16-17 EWR-16-22 Racking Height Overall Height (20" use- 17 1/2" (10 space) 24 1/2" (15" use- 21 " (12 space) 28" (20" use- 21" (12 space) 28" (15" use- 28" (16 space) 35" (20" use- 28" (16 space) 35" Horizontal Distribution Rack Provides 4 racking spaces of equipment mounting in two sections while protruding only 7 1/2" from the wall. Mount patch panels on an upper set of 2 space rackrail that pivots 90° with a positive stop to simplify wire connections. Mount switches, hubs, and routers (up to 18" deep) on a lower set of 2 space rackrail (total depth 21 1/2") that pivots for access to rear connection points. Reversible hinged door with lock and latch, grounding stud, and integral electrical box for power distribution. Features cable pass-through on the backpan, abundant cable tie points, knockouts on the top, bottom and sides for electrical connections, and integral lacing bar on top set of rackrail. Includes a 24" length of hook and loop fasteners for cable management. Constructed of 16-gauge steel and feature 11-gauge, 10-32 threaded rackrail. Finished in a durable putty powder coat. Racking height is 3 1/2" + 3 1/2" (2 space + 2 space). EIA/TIA compliant. UL Listed. DWR Series Sectional Wall Racks Equipped with a locking pivoting center section, fullyadjustable 11-gauge, 10-32 threaded front rackrail and a large laser knockout in the rear which provides smooth cable entry. Comes with a locking smoked plexiglass front door. Two laser knockouts on top and bottom of cabinet allow for optional fan units. Pivoting design (non-hinged) provides weight capacities of 150, 200 and 300 lbs. Features an advanced cable management system residing in the center and rear sections. Solid or vented doors can be ordered as an option. Cabinet can be ordered less the front door by simply removing the suffix "PD" from the part number. *Accommodates vertical power strips L (long), M (medium) and S (short). When mounting vertical power strips in DWR wall racks, part number PB-DWR is required. UL Listed. Part # Depth DWR-10-17PD 17" deep (15" useable) 22" deep (20" useable) 17" deep (15" useable) 22" deep (20" useable) 17" deep (15" useable) 22" deep (20" useable) 17" deep (15" useable) 22" deep (20" useable) 22" deep (20" useable) DWR-10-22PD DWR-16-17PD DWR-16-22PD DWR-21-17PD DWR-21-22PD Part # HDR-4 DWR-24-17PD Versa-Rack Mount hubs and other network components flat against the wall with our innovative all-steel sideways panel mounts. Can also be used to mount components under tables and desks for commercial and classroom use. Each model features a single pair of high quality 11-gauge, 10-32 threaded rackrail that can be positioned in 3 locations to acommodate D-ring cable managers. The low-profile sideways panel mount is equipped with cable lacing points at the rear and includes a steel cover to protect and conceal equipment. Includes rack screws. TIA/EIA compliant. Part # Dimensions (W x H x D) SPM-2 SPM-4 19" x 3.5" x 19" 19" x 7" x 19" Swing Frame Rack Perfect solution for mounting patch panels, routers, hubs and switches. Simplifies wiring tasks by opening a full 90° with a positive stop to facilitate punch-downs. Features cable passthroughs and tie points for ease of cable management. Fully reversible open frame design provides a 18" depth, 100 lb. weight capacity and provides the greatest strength in its class. Constructed of 14-gauge steel with 11-gauge steel rackrail and finished in a durable black textured powder coat. TIA/EIA compliant. Part # Dimensions (W x H x D) SFR-12-18 SFR-20-18 19" x 21" x 18" 19" x 35" x 18" 142 DWR-24-22PD DWR-35-22PD Racking Height Weight Capacity Overall Height Power Strip* 17 1/2" (10 space) 17 1/2" (10 space) 28" (16 space) 150 lbs. 24 9/16" - 150 lbs. 24 9/16" - 150 lbs. 35 1/16" - 28" (16 space) 150 lbs. 35 1/16" - 36 3/4" (21 space) 36 3/4" (21 space) 42" (24 space) 200 lbs. 43 13/16" S 200 lbs. 43 13/16" S 300 lbs. 49 1/16" S 42" (24 space) 300 lbs. 49 1/16" S 61 1/4" (35 space) 300 lbs. 68 5/16" L, M, S DWR Rear Rail Kits 11-gauge, 10-32 threaded, sold in parts. All mounting hardware included. EIA compliant. Part # Description DWR-RR10 DWR-RR12 DWR-RR16 DWR-RR18 DWR-RR21 DWR-RR24 DWR-RR35 DWR-RR40 10 12 16 18 21 24 35 40 space space space space space space space space rear rail kit rear rail kit rear rail kit rear rail kit rear rail kit rear rail kit rear rail kit additional rail kit Wall-Mount Relay Racks A self squaring rack for mounting virtually any data or telecommunications component, the wall-mount relay rack is quick and easy to assemble. An effective method of wall mounting fiberoptic equipment as its fixed design prevents kinking or breaking of glass fibers. Rugged steel construction features 11-gauge, 10-32 threaded rackrail and a black textured powder coat finish. Includes rack screws. TIA/EIA compliant. Part # Dimensions (W x H x D) WM-15-12 WM-15-18 WM-30-12 19" x 26" x 12" 19" x 26" x 18" 19" x 52" x 12" Racks & Cabinets - Wall Mount Wall-Mount Relay Racks (cont.) Part # Dimensions (W x H x D) WM-30-18 WM-8-12 WM-8-18 19" x 52" x 18" 19" x 14" x 12" 19" x 14" x 18" Compact 100 Series Wall Mount Enclosures Made from 1-piece construction, an economical solution to 19" wall-mount equipment. Vented front, rear and top panels. Top and rear panels feature cutouts for cable access and ventilation fan. Designed with internal mounting rails tapped for #12-24 mounting screws in accordance with EIA standards. Comes complete with equipment mounting screws. Front door is reversible for left or right side opening. Key lock pre-mounted on door. Meets or exceeds EIA-310D Standards. Color is ivory. For black, replace -01 with -02. SBX Series 19" Wall Mount Rack The fully welded construction utilizes 18-gauge steel, incorporates a locking front door which swings open a full 180° on a virtually indestructible hinge, and includes a removable backpan for simple installation and easy access to connections. Ventilation slots at the top of each side provide superior cooling, while a deep rail-to-door clearance ratio provides flexibility not found in flush-mount door designs. Additional features include 11gauge threaded 10-32 rackrails, 1/2" and 3/4" electrical knockouts at top, bottom, and rear, and a black textured powder coat finish. EIA compliant. Part # Racking Height Useable Depth Weight Capacity SBX-10 SBX-7 17 1/2" (10 space) 12 1/4" (7 space) 14" 14" 100 lbs. 75 lbs. AXS System for Millwork and In-Wall Use when installing audio and video equipment flush into a wall or cabinet. The patented pull-out AXS design is ideal for access to rear equipment connections. New rotating version: AX-SXR-xx. Up to a 650 lb. weight capacity with proper weight distribution (AX-SXR-xx weight capacity is 450 lbs.). Rack frame heights range from 10 or 15 spaces to 43 spaces. Available with 26", 20" and 16 1/2" frame depths. Unique mechanically interlocking corner joint provides exceptional strength and eases assembly. Telescoping service stand elevates service tracks to bottom of AXS, allowing it to pull out. Articulating cable carriers attach to rack frame for effective cable management. Service tracks include built-in level to reduce installation and servicing time. Part # No. Useable Spaces Extension Length Frame Depth AX-SX AXS-xx-26 SAX SSAX AX-S 10 15 15 10 15 25" 48" 48" 25" 48" 20" 26" 16" 16" 20" to to to to to 43 43 (replace xx) 43 43 43 SR Series Pivoting Rack While mounting to the wall, the rack's entire weight is actually safely supported by the floor. The unit's 8 3/4" bottom cable-entry platform bears the weight of the rack while a low-friction wear-strip facilitates easy opening. Including all of the attributes of the DWR Series sectional wall racks, this series provides 40 rackspaces. Each unit includes a padlockable draw latch plus keylock in its center section, and 1/8" thick laser-cut corner braces. Front vents provide cooling. Top of the rack can accommodate up to (2) 4 1/2" fans. A large laser knockoout in the backpan provides an easily removed pull-box sized opening for cable passage. Abundant tie points are provided for quick cable lacing. Finished in a durable black textured powder coat. UL Listed. Weight capacity is 500 lbs. Part # Racking Hght SR-24-28 SR-24-32 SR-40-22 SR-40-28 SR-40-32 SR-46-28 42" (24 space) 42" (24 space) 70" (40 space) 70" (40 space) 70" (40 space) 80 1/2" (46 space) Useable Depth Overall Depth Overall Hght 26" 30" 20" 26" 30" 26" 28" 32" 22" 28" 32" 28" 62 3/4" 62 3/4" 90 3/4" 90 3/4" 90 3/4" 101 1/4" Part # RMS Height Width Depth Load Capacity WM1019-05-01 WM1019-07-01 WM1019-09-01 WM1019-11-01 5 7 9 11 11" 15" 18" 22" 20.5" 20.5" 20.5" 20.5" 20" 20" 20" 20" 30 50 70 90 lbs. lbs. lbs. lbs. Compact 200 Series Wall Mount Enclosures Feature removable side panels for easy access to equipment and wiring and are key-locked for secure access. Vented front, rear, side and top panels. Top and rear panels feature cutouts for cable access and top panel ventilation fan cutout. Designed with internal mounting rails tapped for #12-24 mounting screws in accordance with EIA Standards. Comes complete with equipment mounting screws. Front door is reversible for left or right side opening. Color is ivory. For black, replace -01 with -02. Part # RMS Height Width Depth Load Capacity WM2019-05-01 WM2019-07-01 WM2019-09-01 WM2019-11-01 WM2019-14-01 WM2019-16-01 5 7 9 11 14 16 11" 15" 18" 22" 26" 31" 20.5" 20.5" 20.5" 20.5" 20.5" 20.5" 20" 20" 20" 20" 20" 20" 30 lbs. 50 lbs. 70 lbs. 90 lbs. 120 lbs. 130 lbs. Compact 300 Series Wall Mount Enclosures Feature a swing-out design which provides access to component rear panels. The rear support mounting section is made with 16 AWG steel which permits cabinet to be opened without sagging, even fully loaded. #12-24 tapped internal mounting rails are included. For 19" rack-mount equipment. Vented front, rear, side and top panels. Meets or exceeds EIA-310D Standards. Listed color is ivory. For black, replace -01 with -02. Part # RMS Height Width Depth Load Capacity WM3019-07-01 WM3019-09-01 WM3019-11-01 WM3019-14-01 7 9 11 14 15" 18" 22" 26" 20.5" 20.5" 20.5" 20.5" 20" 20" 20" 20" 30 50 60 75 lbs. lbs. lbs. lbs. E-Z Compact 600 Series Wall Mount Enclosures Enclosures are packaged broken down in an easy to carry space saving carry box allowing for transporting in small vehicles and warehousing in a fraction of the space as a fully assembled enclosure. For 19" rack-mount equipment. Vented front and top panels Top and bottom panels feature cutouts for cable access and ventilation fan. Designed for internal mounting rails tapped for #12-24 mounting screws in compliance with EIA standards. Listed color is ivory. For black, replace -01 with -02. Part # RMS Height Width Depth Load Capacity EZ19-07-01 EZ19-09-01 EZ19-11-01 7 9 11 15" 18 22 20.5" 20.5 20.5 20" 20 20 45 lbs. 65 lbs. 85 lbs. 143 Racks & Cabinets - Wall Mount 19" Wall Mount Brackets Provides simple and efficient mounting of rack mount components to walls or open frame racks. Available in both non-hinged and hinged designs. Hinged designs for easy access to the rear of components and nonhinged designs for more competitive solutions. Made of 16 AWG steel with EIA spaced threaded mounting holes. In black powder coat finish. Part # RMA Height Depth Hinged WB19-0106H WB19-0206H WB19-0406H WB19-0606H WB19-0412H WB19-0612H WB19-0412N WB19-0612N 1 2 4 6 4 6 4 6 1.75" 3.5" 7" 10.5" 7" 10.5" 7" 10.5" 6" 6" 6" 6" 12" 12" 12" 12" Yes Yes Yes Yes Yes Yes No No Swing-Out Wall-Mount Racks Swing-out design offers unparalleled access to component rear panels. The rear section can be easily separated from the mounting section for ease of field installation. The front section is reversible for right or left side opening. Designed for 19" rackmount equipment with #12-24 threaded rails in accordance with EIA standards on both front and rear flanges. Constructed of high-quality aluminum. Available only in black powder coat finish. Part # RMS Height Width Depth Load Capacity SR1935-20-02 SR1943-25-02 20 25 35" 43.75" 19" 19" 18" 18" 220 lbs. 250 lbs. Wall Mount Open Frame Racks These provide the capability of mounting rack-mount equipment when floor mounting space is limited. Designed for 19" rackmount equipment with #12-24 threaded rails in accordance with EIA standards on both front and rear flanges. Constructed of high-quality aluminum. Available only in black powder coat finish. Part # RMS Height Width Depth Load Capacity WR1922-13-02 WR1928-16-02 WR1935-20-02 13 16 20 22.75" 28" 35" 19" 19" 19" 12" 12" 12" 150 lbs. 165 lbs. 220 lbs. 19" Wall Mount Cabinets Front door features a full length smoked and shatterproof glass door reinforced with decorative metal frame. Two 19" adjustable mounting brackets. Multiple cable entry points on roof and bottom of frames. Easily re-mountable. Powder coat paint finish. Front lock with key. Vented top panel. Rear panel can be used as a mounting plate. Grounding kit included. Sturdy steel construction. Part # Description 680745 680945 681245 7U, Black, 24 x 18 x 12.4 in. 9U, Black, 24 x 18 x 15.7 in. 12U, Black, 24 x 18 x 21 in. Racks & Cabinets - Rack Shelves, Enclosures, Lockboxes, Etc Rackmount Computer Keyboard Occupies 1 3/4" (1 space) and includes a high-quality full 101 key AT style keyboard, with trackball and padded wrist-rests. An articulating arm hinges to provide effective cable management. Comes complete with 12' keyboard and trackball cables including PS/2 connectors and one DB9 serial adaptor. Finished in durable black powder coat. Part # RM-KB Fixed Writing/Computer Keyboard Shelf Bolts quickly to any 19" rack to create an ideal workspace. With an attractive, black laminate top made from 3/4" furniture-grade MDF board, it occupies 2 rackspaces and comes complete with special railmounting hardware. Part # FWS Lockboxes Safely secure gear in rackmount LBX series lockboxes. Nine inches deep and 4 space models are offered with a durable black powder coat finish. Part # Racking Height LBX-3 LBX-4 5-1/4" (3 space) 7" (4 space) 144 DLBX Series DVR Lockbox Optimized to handle the active or passive thermal management needs of digital video recorders and other equipment, the DLBX mounts vertically or horizontally to the wall and can be used as a monitoring shelf. Configurable thermal management system includes fan and two filters and can be set up to accommodate the needs of any DVR. Cable passthroughs, EKOs and tie points facilitate cable management while standard keylocked hinging front door allows easy equipment access. 100 lb. weight capacity. Part # Description DLBX DLBX-WM DLBX-RR5 FC-4-1C DVR lockbox with fan Pair of wall mount backets for DLBX Rackrail kit for DLBX, 5 rackspaces Proportional speed thermostatic fan control for DLBX VLBX Series Time-Lapse Lockboxes Provides high security with easy equipment access. Includes a factory-installed 4 1/2" fan (95 CFM), washable filter, and rubber feet. The standard keylocked solid hinging front door allows easy equipment access, while the mechanically interlocking top provides added security, yet removes easily for equipment servicing. Custom sizes and plexiglass front panel available. Part # Description Inside Dimensions (W x H x D) inches VLBX VTR lockbox with fan 21 1/4 x 8 7/16 x 21 Racks & Cabinets - Rack Shelves, Enclosures, Lockboxes, Etc VLBX Series Time-Lapse Lockboxes (cont.) Part # VLBX-5.5 VLBX-WM The Convective Series™ (cont.) Inside Dimensions (W x H x D) inches Description VTR lockbox with fan Pair of wall mount brackets for VLBX 18 1/4 x 4 7/8 x 15 1/2 n/a LCD Monitoring Desks Versatile, configurable monitoring desk system provides more useable space in a smaller footprint and is optimized for use with LCD screens. Modular design allows economical additions and limitless configuration choices. Connecting wedges available for versatile monitoring setups including curved or serpentine command and control configurations. Available in an attractive maple or light charcoal finish, in both 64" and 48" widths. Part # Description LD-48LC LD-48LC-RA LCD Monitoring LCD Monitoring Charcoal Finish LCD Monitoring LCD Monitoring Finish LCD Monitoring LCD Monitoring Charcoal Finish LCD Monitoring LCD Monitoring Finish LD-48MP LD-48MP-RA LD-64LC LD-64LC-RA LD-64MP LD-64MP-RA Desk, 48", Light Charcoal Finish Desk, 48", Add-A-Bay™ Right, Light Desk, 48", Maple Finish Desk, 48", Add-A-Bay™ Right, Maple Desk, 64", Light Charcoal Finish Desk, 64", Add-A-Bay™ Right Light Desk, 64", Maple Finish Desk, 64", Add-A-Bay™ Right, Maple Desk Accessories Part # Description LD-SP-LC Side panels for LCD Monitoring Desk, Light Charcoal Finish, Pair Side panels for LCD Monitoring Desk, Maple Finish, Pair Full height side panels for LCD Monitoring Desk, Light Charcoal Finish, Pair Full height side panels for LCD Monitoring Desk, Maple Finish, Pair Privacy divider for LCD Monitoring Desk, accommodates light bridge, light charcoal finish Privacy divider for LCD Monitoring Desk, accommodates light bridge, maple finish Privacy divider for LCD Monitoring Desk, full height, light charcoal finish Privacy divider for LCD Monitoring Desk, full height, maple finish LD-PSP-MP LD-LP-LC LD-LP-MP LD-P-LC LD-P-MP Description SC-CBS-27(C) SC-1427-1460(C) SCFD-14(C) SCFD-13(C) SCRK-1327(C) SCRKW45-1327(C) SCRK-1327(C)-S Console caster base Console single bay - includes rear door Locking solid front door, 14 space Security rack front door with 3 point latch Security rack - 27" deep, 13 rackspaces 45° connecting wedge for security rack Slide out rotating rackbay system, 11 useable rackspaces, security rack 45° connecting wedge for consoles (base console only), 17° slope 45° connecting wedge for consoles (base console only), 60° slope 45° connecting wedge for 17° sloped top monitor race Top monitor (3rd tier), 12 rackspaces, 17° slope Security rack - 27" deep, 44 rackspaces Stainless steel toe kick/footrest Additional top monitor 12 space rail kit Additional console 27 space rail kit SCW45-1427-1217(C) SCW45-1427-1460(C) SC3TW45-1427-1217-1217(C) SC3T-1427-1217-1217(C) Desks LD-SP-MP LD-PSP-LC Part # The Convective Series™ Featuring engineered ventilation patterns on consoles, top monitor racks, doors, and side panels, this series is optimized to facilitate natural convective cooling to extend equipment life and reduce maintenance. Compared to other consoles, The Convective Series™ offers a narrow 22" wide space-saving design. Unique 'zero-space' wedge minimizes room space required for installation, while advanced cable management features reduce installation time. Add a suffix, -BK for black, GY for granite gray or LG for light gray, at end of part number for desired color. Part # Description SC-1427-1217(C) SC3T-1427-1217-12(C) Convective console Top monitor racks, straight SCRK-4427(C) SC-TK SC-RR12 SC-RR27 The Quiet-Cool Series™ Console Engineered thermal management includes baffled air intake and baffled exhaust on rear doors to keep equipment cool. Gasketed front and rear doors, as well as console base, isolate user from noise created by hard drives, DVRs, etc. Fully welded 14-gauge construction (no assembly required). UL Listed in the US and Canada. Available with a 17° or 60° sloped upper tier. Three pairs fullyadjustable 11-gauge 10-32 threaded rackrail. Rackrail marked in numbered rackspace increments. Brush grommet cable entry above work surface. Three point locking rear door standard on top monitor rack. Unique zero-space wedge saves space and includes 3 point locking rear door allowing interior to be used for cable management and power distribution. Color = C: -BK for black, -GY for granite gray or LG for light gray, at end of part number for desired color. Part # Description SCQ3T-1427-1217-12(C) Top monitor rack (3rd tier), 12 rackspaces, straight face 45° connecting wedge for straight top monitor rack Top monitor rack (3rd tier), 12 rackspaces, 17° slope Slide out rotating rackbay system, 11 useable rackspaces, security rack 13 space (22 3/4”), 27” deep stand alone rack with rear door 45º connecting wedge for security rack Slide out rotating rackbay system, 11 useable rackspaces, security rack 45º connecting wedge for consoles (base console only), 17º slope 45º connecting wedge for consoles (base console only), 60º slope SC3TW45-1427-1217-12(C) SCQ3T-1427-1217-1217(C) SCQRK-1327(C)-S SCQRK-1327(C) SCRKW-1327(C) SCRK-1327(C)-S SCW45-1427-1217(C) SCW45-1427-1460(C) 145 Racks & Cabinets - Rack Shelves, Enclosures, Lockboxes, Etc SH Series Zero Space Rackshelves Designed for use in the Slim 5, AXS, SRSR and WR equipments racks. Feature full-depth front and rear rackmounting, providing a secure shelf for non-rackmount components. A truly unique design, this "zerospace" shelf actually mounts to the sides of the rackrail (not the threaded face) providing more useable shelf area and features up to a robust 250 lbs. weight capacity, depending on model. Two handy "L" brackets are included to help position equipment. Cosntructed from 16-gauge steel, includes mounting hardware and is finished in a durable black powder coat. Part # Depth Weight Capacity Fits SH-5A 19 1/4" 250 lbs. SH-5A-26 26" 250 lbs. SH-SRSR SH-WR 16" 24" 200 lbs. 250 lbs. 20" depth AXS and Slim 5 racks 26" depth AXS and Slim 5 racks SRSR racks WR racks Universal Rackshelves These easy-to-install shelves fit all components up to 17 3/8" wide to quickly meet all of your rackmounting needs. Made from 16-gauge steel and finished in a durable black powder coat. Part # Racking Height Depth Capacity U1 U2 U3 U4 1 3/4" (1 space) 3 1/2" (2 space) 5 1/4" (3 space) 7" (4 space) 11" 14 3/4" 14 3/4" 15 1/2" 35 50 70 85 lbs. lbs. lbs. lbs. Half-Rack Shelf Now you can mount half-rack components, wireless units, and other gear horizontally with the UTR1 halfrack shelf. A universal mounting hole pattern accommodates virtually any half or third space component, equipment mounting hardware is included. Constructed from 16-gauge steel with a 25 lb. weight capacity and finished in a durable black powder coat. Racking height is 1 3/4" (1 space). Depth is 10”. Part # UTR1 Clamping Rackshelves For components which require captivation, these offer a solution. Equipped with rubber-lined clamps which secure your component from the top, all RC and CAP Series products are additionally outfitted with adjustable "L" brackets in back to provide an optimally secure fit. Vented bottoms. 16-gauge steel design. Durable black powder coat. RC models assembled. CAP units unassembled. Part # Racking Height Depth CAP5 CAP6 CAP7 CAP8 RC-2 RC-3 RC-4 8 3/4" (5 space) 10 1/2" (6 space) 12 1/4" (7 space) 14" (8 space) 3 1/2" (2 space) 5 1/4" (3 space) 7" (4 space) 15 15 15 15 15 15 15 Adjustable Rackshelf Front to rear mounting adjustment from 19 1/2" to 25" deep, this versatile shelf rack mounts most video decks and tower CPU's. Knock-down for freight and space economy, this 5 1/4" (3 space) adjustable shelf support 500 lbs. Fits in racks with a minimum 25" overall depth. Shelf area (W x D) is 17 3/8" x 22 1/4". Part # AS3-22 146 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" Knock-Down Rackshelves Made from heavy 16-gauge steel, the ventilated bottoms measure up to 20 1/2" deep. Ear heights range from 2 to 10 spaces and are sold in pairs. All assembly hardware is included. Bottom Series Part # Depth KDB KDB-14 KDB-17.5 KDB-20.5 15 1/2" 14"* 17 1/2" 20 1/2" Ear Series Part # Racking Height Depth KDE10 KDE2 KDE2S KDE3 KDE3S KDE4 KDE4S KDE5 KDE6 17 1/2" (10 space) 3 1/2" (2 space) 3 1/2" (2 space) 5 1/4" (3 space) 5 1/4" (3 space) 7" (4 space) 7" (4 space) 8 3/4" (5 space) 10 1/2" (6 space) 15 1/2" 15 1/2" 11 1/2" 15 1/2" 11 1/2" 15 1/2" 11 1/2" 15 1/2" 15 1/2" Vented Cantilever Shelf This 3 space (5 1/4") unit is capable of supporting up to 60 lbs., and is 17 3/4" deep. Equipped with a slotted rear flange for effective cable management and made from 16gauge steel. Black powder coat finish. TIA/EIA compliant. Part # U317 Vented Center Mount Shelf 18" deep with a 50 lb. capacity, the vented center mount shelf features cable management built into the slotted front and rear flanges. Occupies 2 spaces (3 1/2"), black powder coat finish. TIA/EIA compliant. Part # U2MS Heavy-Duty Sliding Shelf Weight capacity of 50 lb. Heavy-duty 16-gauge steel construction. Capable of latching in an open or closed position, the shelf slides on ball bearings to an extended length of 14". A telescopic rear support mounts the shelf to any rack (rear rackrail required in steel racks). Occupies slightly more than a single rackspace. Fits in racks with a minimum 16" overall depth. Shelf area (W x D) is 17 1/2" x 14 3/4". Part # SS Low Profile Sliding Shelf Filling just a single rackspace, the low profile SSL sliding shelf extends 11" on nylon roller slides equipped with positive-stop layouts. A telescopic rear support mounts to any rack (rear rackrail required in steel racks). Black laminate material. 35 lb weight capacity. Fits in racks with a minimum 16" overall depth. Shelf area (W x D) is 17" x 14". Part # SSL Racks & Cabinets - Rack Shelves, Enclosures, Lockboxes, Etc Wide Unit Shelf System Accommodating components too wide to fit the 71 3/8" inside width of standard rackshelves, these shelf systems fit units up to 22 1/2" wide, and either bolt into millwork or to the mounting angle of standard rackrail. Occupies 3 rackspaces. The WUSS system comes complete with a pair of ears, a bottom, and appropriate assembly hardware. Part # Depth WUSS11.5 WUSS14 WUSS15.5 WUSS17.5 WUSS20.5 11 1/2" 14" 15 1/2" 17 1/2" 20 1/2" EB/FEB Series Blank Panels Available in your choice of flanged or flat style, these economical steel blank panels feature a durable black powder coat finish. EB Series panels are 16gauge, FEB Series panels are 14-gauge steel. Part # Type Racking Height FEB1 FEB2 FEB3 FEB4 FEB5 FEB6 Flat Flat Flat Flat Flat Flat 1 3/4" (1 space) 3 1/2" (2 space) 5 1/4" (3 space) 7" (4 space) 8 3/4" (5 space) 10 1/2" (6 space) Shelves Options for load ratings up to 200 lbs. suitable for use with lightweight and heavyweight active and passive equipment. Options for standard (20" wide) or compact (16.5" wide) keyboards. Slide out mouse pad integral to all keyboard shelves. Rack Mount Shelves Part # Description Dim. HxWxd in (mm) SRM19CMV3 Cantilevered shelf, vented aluminum includes 2 piece shelf that mounts to front and back of EIA racks SRM19FM1 Front mount shelf, steel Load Rating No. Rack Spaces 5.2 x 19.0 x 24.9 (132.1 x 482.6 x 632.5) 200 lbs. 3 1.7 x 19.0 x 15.2 (43.2 x 482.6 x 386.1) 30 lbs. 1 SRM19FM2 Front mount shelf, steel 3.5 x 19.0 x 15.2 (88.9 x 482.6 x 386.1) 50 lbs. 2 SRM19CM3 Cantilevered shelf, aluminum - includes 2 piece shelf that mounts to front and back of EIA racks 5.2 x 19.0 x 12.5 (132.1 x 482.6 x 317.5) 200 lbs. 3 SRM19X18A1 Adj. mount shelf, steel, mounts to front and back of EIA racks 1.7 x 19.0 x 18.0 (43.2 x 482.6 x 457.2) 250 lbs. 1 1.7 x 19.0 x 25.0 (43.2 x 482.6 x 635) 250 lbs. SRM19X25A1 Adj. mount shelf, steel, mounts to front and back of EIA racks 1 Shelves (cont.) Keyboard Shelves Dim. HxWxD in (mm) Load Rating Rack mount shelf with keyboard tray, aluminum; accepts keyboards up to 16.5" wide, mounts to front and back of EIA racks 3.4 x 17.0 x 18.5 (86.4 x 431.8 x 469.9) 200 lbs. Rack mount shelf with pivoting keyboard tray, aluminum; accepts keyboards up to 20" wide, mounts to front and back of EIA racks 3.4 x 17.0 x 24.4 (86.4 x 431.8 x 609.6) 200 lbs. Part # Description SRM19MK2 SRM19MPK2 VCR/DVR Security Lock Box Designed for maximum protection of video time-lapse recorders and like equipment protecting it from unauthorized access with enough space for switchers and accessories. Can be mounted on top surfaces or wall-mounted with optional wall mounting brackets. Housing features heavy duty 18AWG steel frame construction, vented front and rear panels for cooling aided by the pre-installed ventilation fan. Also includes 2 rear cable access plugs. Front swing-out door comes with a pre-installed cam lock and key and the top panel is removable for additional access. Black powder coat finish. Part # Description SE0920-21-02 WB-SE-02 VCR/DVR lock box Optional mounting bracket set High-Load Capacity Slide-Out Tray With a depth of 23" and heavy-duty construction, this slide-out shelf design allows a load capacity of 150 pounds when extended. Designed for heavy equipment such as servers, UPS, batteries and other large weight equipment. These can be mounted on standard 19" width racks and enclosures and come in black powder coat finish. 1 RMS. Part # ES0119-0123 Single-Sided Vented Shelves Allow for added flow-thru ventilation. They are designed for 19" rack mount widths and are made of 16 AWG steel. The 1-piece design allows for strong support. Finished in durable black powder coat. Part # RMS Dimensions (WxD) inches Load Capacity ES0219-0110 ES0219-0115 ES0219-0210 ES0219-0215 1 1 2 2 19 19 19 19 15 35 18 38 x x x x 10.5 15 10.5 15 lbs. lbs. lbs. lbs. Single-Sided Non-Vented Shelves These solid shelves are designed for 19" rack mount widths and are made of 16 AWG steel. The 1-piece design allows for strong support. Finished in durable black powder coat. Part # RMS Dimensions (WxD) inches Load Capacity ES0319-0110 ES0319-0115 ES0319-0210 ES0319-0215 1 1 2 2 19 19 19 19 25 40 28 42 x x x x 10.5 15 10.5 15 lbs. lbs. lbs. lbs. 147 Racks & Cabinets - Rack Shelves, Enclosures, Lockboxes, Etc Slide-Out Shelf - 19” x 14” This design allows for easier access to equipment by sliding out the ball-bearing mounted tray which extends a full 14 inches from its closed position. The telescopic rear support mounts on the rails of an open bay rack. Made from 16 AWG steel and comes in a durable black powder coat finish. Load capacity is 55lbs. Part # ES0419-0114 1-Piece Double-Sided Shelves The 1-piece double-sided shelves are center mounted between the uprights rails of all standard 19" panel width open racks and are offered in non-ventilated and ventilated designs. Made of 16 AWG steel construction in black powder coat finish. RMS is two. Color is black. Vented Shelves Part # Dimensions (Width/Depth) Load Capacity (lbs) ES0619-0218 ES0619-0225 19" x 18" 19" x 25" 100 120 Adjustable Double-Sided Equipment Shelf Material is cold rolled steel 16 AWG. Black powder coat finish. Height is 2 rack units. Depth is 18" collapsed and 31" extended. Load capacity is 120 lbs max (4 attach points). Mounting hardware included. Part # ES1219-0218 Blank Panels These blank panels are used to cover gaps or free spaces in racks or enclosures. They may also be used for drilling and mounting specialized equipment or components. Made of 16 AWG cold rolled steel and available in various rack height sizes. Finished in black powder coat. Part # RMS Height BP19-01 BP19-02 BP19-03 1 2 3 1.75" 3.50" 5.25" Non-Vented Shelves Part # Dimensions (Width/Depth) Load Capacity (lbs) 19" Rack Shelves ES0819-0218 ES0819-0225 19" x 18" 19" x 25" 100 130 2 Point Fixed 2-Piece Double-Sided Split Shelves The 2-piece divided split-design shelves allow the installers to easily mount each side individually without the need of removing existing equipment. These are mounted on the upright rails of all standard 19" panel width open racks and are offered in non-ventilated and ventilated designs. Made of 16 AWG steel construction in black powder coat finish. Part # Type RMS Dimensions (inches) ES0919-0225 ES0719-0225 Non-Vented Vented 2 2 19 x 25 19 x 25 Load Capacity 100 lbs. 130 lbs. Keyboard Shelf with Reversible Mouse Tray - 19” x 18” The stationary keyboard/mouse shelf mounts on any 19" width open rack and accommodates standard keyboards and its mouse tray can be mounted on the left, right or center of the tray. Takes up 1 RMS (1.75") and comes in black powder coat finish. Load capacity is 12 lbs. Part # ES1019-0108 Hide-Away Keyboard Shelf with Pull-Out Mouse Tray Designed for mounting on 19" width enclosures, this hide-away keyboard shelf is mounted on a bearing track which allows the keyboard shelf to be stowed when not in use. A quick slide pull and 90 degree turn is all it takes to set up the keyboard tray for operation. Incorporated in the tray is a pull-out mouse shelf. Takes up 1 RMS (1.75") of panel space and comes in black powder coat finish. Part # ES1119-0115 Part # Description 674830 674835 674935 677453 670200 19", 1U, unslotted, 13.5 in. deep 19", 2U, unslotted, 13.5 in. deep 19", 2U, unslotted, 13.7 in. deep 19", 2U, slotted, 21 in. deep 2U, double shelf, non-vented - compatible with 673601, 674201, 674801 2U, double shelf, vented - compatible with 673601, 674201, 674801 670201 4 Point Fixed Compatible with 674200 only. Part # Description 676035 686035 678052 688052 19", 19", 19", 19", 4 Point Sliding Compatible with 674200 only. Part # Description 676036 686034 678054 688053 19", 19", 19", 19", slotted, 13 in. depth, black unslotted, 13 in. deep 1U, unslotted, 13.5 in. deep unslotted, 21 in. deep Sliding Shelf Heavy Duty, 485 x 750 x 60 mm (19.1 x 29.3 x 2.4 in.). Four mounting points on sides. Complete with rear cable management System. Unslotted. Heavy Duty Load capacity: 176 lbs. Hardware included, easy to install. Material: Sheet steel. Color: Black. Part # 681074 148 unslotted, 13 in. deep slotted, 13 in. deep 1U, unslotted, 13.5 in. deep slotted, 20 in. deep Racks & Cabinets - Rack Shelves, Enclosures, Lockboxes, Etc Fixed Shelf 19", Slotted, 745 mm (29") Depth, Black Heavy Duty. Slotted. Maximum load of 220 lbs. Four mounting points on sides. Installation hardware included. Material: Sheet steel. Black. Shelves For mounting telecommunication devices in a 19" rack or cabinet. Cantilevered shelf mounts to the front or rear of the racks mounting rails. Both the center weight and the cantilevered shelf are black and manufactured from 16 gauge steel and come with 10-32 and 12-24 mounting hardware. Cantilevered shelf is rated for 50 pound capacity and the center weight is rated for 75 pound capacity. Shelves are solid - add V to end of part number for vented shelves. Part # 671075 Hinged Wall Brackets For use with most 19" patch panels. Each level is individually hinged. Screws included. Black. Part # Description 402439 402446 402453 402460 402477 1U 2U 3U 4U 6U Description 673001 165723 673002 673000 1U, 1U, 2U, 3U, Dim. (HxWxD) Description T19X145 T19X195CW 3.44" x 19" x 14" 3.44" x 19" x 19" Solid Cantilevered Shelf Solid Center Weight Shelf Rack Mount Shelves Designed for use in equipment and cable management racks, for locating keyboards, monitors or other shelf-located network equipment. Available in either cantilevered or center weight style. Both styles are constructed from 16-gauge steel with a black polyurethane finish in either solid or louvered ventilated botton style. Rated for a maximum of 50 lbs. capacity. Number of rack spaces is two. Sliding Keyboard and Storage Drawers Lockable drawer for keyboards up to 16 in. wide. Fits all Intellinet Network Solutions cabinets and racks. Material is sheet steel. Part # Part # keyboard not included includes keyboard and trackball lockable lockable, black 485 x 480 x 135 mm Part # Description Dim. inches (H x D) ERB-14C ERB-14CS ERB-18C Cantilever Vented Bottom, Black Cantilever Solid Bottom, Black Cantilever Offset Vented Bottom, Black Cantilever Offset Solid Bottom, Black Center Weight Vented Bottom, Black Center Weight Solid Bottom, Black 3.5 x 14 3.5" x 14" 3.5" x 18" ERB-18CS ERB-19C ERB-19CS 3.5" x 18" 3.5" x 19" 3.5" x 19" Racks & Cabinets - Rackmount Power Strips & Surge Protection 115 Volt Vertical Power Strips Constructed from 16-gauge steel, finished in a durable black powder coat and are UL Listed in the US and Canada. Both 15 and 20 amp circuits. Isolated ground circuits. Single and dual circuits (with color-coded outlets for each circuit). Multiple MOV surge and spike protection (non-MOV strips are available). Circuit breaker protection (non-protected strips are also available). Multiple termination choices. Features mounting lances and quick clips. Engineered to attach to the rackrail brackets on all of our welded racks. 15 Amp Power Strip Part # Termination Protection No. Outlets OD Lgth (inch) Fits Racks Coded Circuit PD-1015C PD-1015C-NS PD-1215 PD-1415C PD-1415C-NS PD-2415SC-NS PD-2X615 PD-615C PD-615C-NS Cord with NEMA 5-15P plug Cord with NEMA 5-15P plug 3' flex with 8" tails Cord with NEMA 5-15P plug Cord with NEMA 5-15P plug Cord with NEMA 5-15 plug 3' flex with 8" tails Cord with NEMA 5-15P plug Cord with NEMA 5-15P plug MOV surge+EMI filter+breaker Circuit breaker None MOV surge+EMI filter+breaker Circuit breaker Circuit breaker None MOV surge+EMI filter+breaker Circuit breaker 10 10 12 14 14 24 12 6 6 40 40 57 57 57 60 57 26 1/2 26 1/2 Medium Medium Long Long Long Long Long Short Short 15 Amp 15 Amp 15 Amp 15 Amp 15 Amp 15 Amp 15 Amp 15 Amp 15 Amp (1) (1) (1) (1) (1) (1) (2) (1) (1) 149 Racks & Cabinets - Rackmount Power Strips & Surge Protection 115 Volt Vertical Power Strips (cont.) 20 Amp Power Strips Part # Termination Protection No. Outlets OD Lgth (inch) Fits Racks Coded Circuit PD-1020C-NS PD-1020J-IG Cord with NEMA 5-20P plug J-Box Circuit breaker None 10 10 40 44 Medium Medium PD-1220C-NS PD-1220J PD-1220J-IG Cord with NEMA 5-20P plug J-Box J-Box Circuit breaker None None 12 12 12 57 61 61 Long Long Long PD-2X620-J PD-620C-NS PD-620J-IG J-Box Cord with NEMA 5-20P plug J-Box None Circuit breaker None 12 6 6 61 26 1/2 30 1/2 Long Short Short 20 Amp 20 Amp (1) 20 Amp 20 Amp 20 Amp (1) 20 Amp 20 Amp 20 Amp (1) High Density 15 Amp Slim Power Strips Power strips contain a number of outlets that have been spaced to accommodate plug-in power supplies. Measures 1 1/4" deep by 1 5/8" wide. Provides maximum usability while taking up minimum space. Comes complete with 10' power cord terminated with a NEMA 5-15P plug, 15 amp circuit breaker and mounting system. (2) (1) ISO ground The PD-815 series rackmount power distribution units are equipped with 8 rear outlets and feature a front pilot light for status indication. Standard equipment includes surge and spike protection, EMI filtering and a 9' cord. A generous 9" depth provides easy access to the 15 amp rear panel outlets which are solidly mounted on yokes to eliminate deflection. Protection No. Outlets OD Length PD-2415SC MOV surge + EMI filter + breaker Circuit breaker 24 60" Part # Finish 60" PD-815R-PL PD-815RA-PL PD-815RC-PL Black powder coat Black brushed and anodize Silver brushed and anodized 24 (1) (1) ISO ground 115 Volt Rackmount Power Strips (cont.) Part # PD-2415SC-NS (1) ISO ground 115 Volt Rackmount Power Strips Rackmount units provide economical power distribution and sequencing. Equipped with 8 circuit breaker protected 20 amp rear outlets (NEMA 5-20R), and one 15 amp front outlet (NEMA 5-15R). 9" depth provides easy access to the yoke-mounted rear outlets, while the extra-long 9' AC cord eliminates the need for an additional extension cord. An illuminated power switch is located on the front panel, and a 20 amp circuit breaker is located in the rear. Occupies one rackspace. UL FIle #E204950. UL Standard 1419. TIA/EIA compliant. Nine outlets (8 rear, 1 front). Part # PD-920R-NS Sequencing 15 amp power distribution provides 6-step sequencing to 6 rear outlets. Adjustable start time delay allows daisy-chaining of up to (3) PDS-615R's to act as a single 18 step unit. Sequencing intervals are facilitated via front panel controls, while all sequencing activity is monitored by a series of LED indicators also found on the front panel. Additionally, a remote up/down sequencing connection block is located on the rear panel which facilitates daisy-chaining and remote control. An illuminated combination power switch/circuit breaker is located on the front panel. 9" deep and includes a 9' cord. Finished in a durable black powder coat, occupies one rackspace. TIA/EIA compliant. Part # PDS-615R Equipped with eight 15 amp rear outlets and one 15 amp front outlet. Standard equipment includes surge and spike protection, EMI filtering and a 9' cord. A generous 9" depth provides easy access to the 15 amp rear panel outlets which are solidly mounted on yokes to eliminate deflection. An illuminated combination power switch/circuit breaker is located on the front panel. Finished in a durable black powder coat, occupies one rackspace. UL File #E204950. UL Standard 1419. TIA/EIA compliant. Part # PD-915R 150 Rack-Mount Surge Protection Devices Mounts on 19" equipment racks to provide point-of-use surge suppression for electronic equipment. Clamping profile tightly tracks AC sine wave. Six protected duplex receptacles - 5 in back and 1 in front. Available with easy-access ON/OFF rocker-style switch or without switch to avoid unnecessary equipment switching. Resettable circuit breaker protects against overloading and power-supply failure. Provided with 12 foot line cord with NEMA 515P, L5-15P, 5-20P or L5-20P plug. Lifetime limited downline warranty. 5500 Series - NEMA 5-15P, 5-20P Part # Description 5500-190 5500-15N 125V, 15A - with on/off switch - 12 outlets - standard blade plug 125V, 15A - without on/off switch - 12 outlets - standard blade plug 125V, 20A - with on/off switch - 12 outlets - standard blade plug 125V, 20A - with on/off switch - 12 outlets - locking plug 125V, 20A - without on/off switch - 12 outlets - standard blade plug 125V, 20A - without on/off switch - 12 outlets - locking plug No ON/OFF Switch, Joules is 1440. Rating is 15A 120V 120V, 15A - with on/off switch - resettable circuit breaker 5500-192 5500-20L 5500-20N 5500-2NL 5500-NL 5505-190 4505 Series 19" rack mount no-surge power strip with switch. Part # Type Length Rating 4505-20L 4505-20T Standard locking plug Standard locking plug 12 ft. 14-3 SJT 10 ft. 14-3 SJT 120V / 20A 120V / 20A Racks & Cabinets - Rackmount Power Strips & Surge Protection Metered Power Distribution Units (PDU's) Provides the reliable power distribution required for high-demand applications. Local LED display provides input current monitoring, giving on-site users the ability to monitor aggregate current draw as equipment is connected to each unit, preventing potential overload situations in high-density environments. Available in 110-120V or 208-240V with 20 and 30-amp options. Choose space-saving vertical zero-U or horizontal rack-mount styles with a variety of input and output plug types. *All 30 amp PDU's include a hardwired power input cord. Other configurations available on request. Metered Vertical Power Distribution Units (PDU's) Part # Dimensions Power Inputs/Outputs Input Voltage 1 or 3 Phase Amperage Input Plug Type Output Receptacle MV121-1D1 MV121-1B1 MV122-1C2 MV241-1D1 MV241-1B1 MV242-1C2 MV213-1E2 31.25" x 1.75" x 2.25" 31.25" x 1.75" x 2.25" 31.25" x 1.75" x 2.25" 54.0" x 1.75" x 2.25" 54.0" x 1.75" x 2.25" 54.0" x 1.75" x 2.25" 46.75" x 1.75" x 2.25" 1/12 1/12 1/12 1/24 1/24 1/24 1/21 110 110 208 110 110 208 208 1 1 1 1 1 1 3 20 30* 30* 20 30* 30* 20 C20 L5-30 L6-30 C20 L5-30 L6-30 L21-20 5-20R 5-20R C13 5-20R 5-20R C13 C13 Metered Horizontal Power Distribution Units (PDU's) Part # Dimensions Power Inputs/Outputs Input Voltage 1 or 3 Phase Amperage Input Plug Type Output Receptacle MH101-1D1 MH101-1B1 MH122-1C2 1.75" x 17.25" x 5" 1.75" x 17.25" x 5" 1.75" x 17.25" x 5" 1/10 1/10 1/12 110 110 208 1 1 1 20 30* 30* C20 L5-30 L6-30 5-20R 5-20R C13 Power Cords A hardwired power input cord is provided with all 30-amp PDUs. Power cords for 20-amp PDUs, available in multiple configurations to meet a variety power requirements, are sold separately. Part # Description PCORD-F10 PCORD-G10 PCORD-A10 PCORD-H10 15/20A, 15/20A, 15/20A, 15/20A, C19 C19 C19 C19 to to to to L-620P, 10 ft. 5-15P, 10 ft. 5-20P, 10 ft. L5-20P, 10 ft. Switched Power Distribution Units (PDU's) Provides the solution to many power management problems common in IT environments, including unauthorized use of power outlets, equipment lock-up, in-rush current, overloaded circuits and the need for remote access to power outlets. These problems are addressed through an extensive feature set including individual outlet control which allow users to turn outlets on and off or recycle power, in order to reboot equipment and avoid unauthorized outlet usage. The power sequence feature controls the interval in which equipment is powered up or down to avoid in-rush current. The aggregate current draw can be monitored remotely or locally via digital display to avoid overload conditions. Switched Power Distribution Units can be accessed, configured and controlled via Telnet/SSH, HTTP/SSL, Serial Ports, and SNMP. *All 30 amp PDU's include a hardwired power input cord. Other configurations available on request. Switched Vertical Power Distribution Units (PDU's) Part # Dimensions Power Inputs/Outputs Input Voltage 1 or 3 Phase Amperage Input/Output Plug Type SV161-1D1 SV161-1B1 SV162-1C2 63.5" x 1.75" x 2.25" 63.5" x 1.75" x 2.25" 63.5" x 1.75" x 2.25" 1/16 1/16 1/16 110 110 208 1 1 1 20 30* 30* C20/5-20R L5-30/5-20R L6-30/C13 Switched Horizontal Power Distribution Units (PDU's) Part # Dimensions Power Inputs/Outputs Input Voltage 1 or 3 Phase Amperage Input/Output Plug Type SH081-1D1 SH082-1C2 SH081-1B1 1.75" x 17" x 7" 1.75" x 17" x 7" 1.75" x 17" x 7" 1/8 1/8 1/8 110 208 110 1 1 1 20 30* 30* C20/5-20R L6-30/C13 L5-30/5-20R Accessories Temperature and relative humidity probe, 10 ft. Each Switched PDU has the intelligence for environmental monitoring. An external probe designed to monitor temperature and relative humidity is available separately. Each 30-amp PDU includes a hardwired power input cord. Power cords for 20-amp PDUs, available in multiple configurations to meet a variety of power requirements, are sold separately. Part # TCORD-10 151 Racks & Cabinets - Rackmount Power Strips & Surge Protection Power Strips Multiple mounting options. Dual circuit option for use with equipment requiring a redundant power supply. One rack space = 1.75" (44.45mm). Black. Dim. HxWxD in. (mm) Part # Description CMRPSH15 19" Horizontal rack mount power strip with a 15 amp circuit, 10 receptacles and a 10' power cord, NEMA 5-15P plug 19" Horizontal rack mount power strip with a 20 amp circuit, 10 receptacles and a 10' power cord, NEMA 5-20P plug Vertical rack mount power strip with a 20 amp circuit, 10 receptacles and a 10' power cord, NEMA 5-20P plug Vertical rack mount power strip with a 20 amp circuit, 10 receptacles per circuit and 2 - 10' power cords, NEMA 520P plugs CMRPSH20 CMRPSV20 CMRPSVD20 1.72 x 3.75 x 19.00 (43.7 x 95.3 x 483.7 1.72 x 3.75 x 19.00 (43.7 x 95.3 x 483.7) Power Distribution Units (PDU) These power distribution units provide convenient multiple AC outlets and can be mounted either vertically in a "Zero U" configuration or horizontally in a "one U" configuration inside a 19" rack enclosure. Part # Outlets Circuit Breaker PDU1215 12 (NEMA5-15R) 15A PDU1220 12 (NEMA5-20R) 15A PDU2430 12 (NEMA5-20R) 2-15A* NEMA515P NEMA520P NEMA L530P Cord Length 15' 15' 12' 38.50 x 1.46 x 1.85 (977.9 x 37.1 x 47.0) 66.25 x 1.46 x 1.85 (1682.8 x 37.1 x 47.0) Power Strips Power outlets in 19" rack-mount and vertical configurations. The rack-mount units feature 10-outlets (2-front and 8 rear) with illuminated rocker power switch and 15 amp circuit breaker. The vertical unit is designed for mounting inside equipment enclosures and feature a 16 or 20 outlet capacity plus isolated poles. Finished in black powder coat. UL Listed. Part # Outlets Format/Height HPS-10 VPS-1604 VPS-2006 10 (2 Front-8 Rear) 16 20 19" Horiz. Vertical 4' Vertical 5 ft. Rackmount Models Supports 1U rackmount, wallmount, undercounter and variety of other creative installation types. Cord 15 ft. Housing is black. Dimensions (LxWxH) 1.75 x 19 x 4.5. Part # Outlets Electrical Rating RS-1215 RS-1215-20 RS-1215-RA RS-0615-R RS-0615-F 12 12 12 (Right Angle) 6 (NEMA5-15R) Back 6 (NEMA5-15R) Front 1800W 1800W 2400W 1800W 1800W Rack Mount UPS Advanced protection against power outages, sags, surges and line noise. RISC-based microprocessor maintains proper charge, provides consistent power output and helps extend battery life. Built-in expansion slot for optional SNMP card. Automatic voltage regulation (AVR), cold start capability and diagnostics. 1120 Joules telephone/fax and network surge protection. Circuit breaker protection offers quick recovery from overload and short circuit events. LED and audible alert system and power management software help monitor critical functions. $100,000 connected equipment guarantee (US and Canada only). Lifetime Warranty, UPS; Three-year Warranty, battery. Part # 168205 Our inventory changes daily. Please contact us if the product or part you are looking for is not included in this publication. 152 Input Plug (15A) (15A) (20A) (15A) (15A) Racks & Cabinets - Rack Wire Management MK Cable Management Rack Engineered for high-density patching applications. Unique indexed swiveling front-mount cable rings. Oversized cable ducts capable of handling massive cable bundles. Integral top cable ladders and cable trays front and rear. Hook and loop fasteners and front cable feedthrough hole plugs are provided for easy cable management. Rack is 24" wide for use with raised flooring tiles. 100 rack screws are included. Accommodates vertical power strips L (long), M (medium) and S (short). TIA/EIA compliant. Part # Overall Height Overall Depth Mounting Channel Depth Width MK-19-45 MK1945-24 84 1/4" 84 1/4" 16 7/16" 24" 6 3/8" 14” 24" 24” Pivoting Panel Mounts Allows easy rear access. Design facilitates punching down while fully open. Tie points for cable management, hook and loop cable fasteners. Rugged steel construction. Black powder coat finish. Rack screws and hook and loop fasteners included. Note: When using the door option, top cover is required. Part # Dimensions (W x H x D) PPM-2 PPM-4 PPM-6 PPM-6-12 PPM-8-12 PPM-8-18 PPM-6-12K PPM-8-12K PPM-8-18K 19" x 3.5" x 6" pivoting panel mount 19" x 7" x 6" pivoting panel munt 19" x 10.5" x 6" pivoting panel mount 19" x 10.5" 12" pivoting panel mount 19" x 14" x 12 pivoting panel mount 19" x 14" x 18" pivoting panel mount PPM-6-12 with cover and door PPM-8-12 with cover and door PPM-8-18 with cover and door Hinged Panel Mount Provides simple and straightforward wall-mounting of rackmount components and can be rackmounted to any open frame rack. Hinged to provide rear access to mounted components, each of the 1, 2, 4, and 6 space units are 6" deep. Abundant tie points for internal cable management, smooth cutout in rear for cable pull-through, heavy-duty threaded rackrail. Durable, attractive black powder coat finish, rack screws included Part # Description HPM-1 HPM-2 HPM-4 HPM-6 HPM-LID 1 3/4" (1 space) Racking Height 3 1/2" (2 space) Racking Height 7" (4 space) Racking Height 10 1/2" (6 space) Racking Height Hinged Panel Mount Lid CK Series Cable Organizers Built to handle extra large cable bundles while providing simple distribution provisions front and rear. Made to fit RL10-45 and RL12-45 relay racks, each CK series organizer measures 6" wide by 9" deep (4 1/2" front, 4 1/2" rear), and is outfitted with strategically-placed lacing points with abundant front to rear cable openings. Center units are intended to be bolted between racks, and allow front and rear cables to exit either left or right. End units facilitate left or right cable exit as well, each of which is selectable by turning the duct when mounting. Optional split organizer covers hides wires and cables and enhances appearance. The covers fit both center and end units, hang off to the side when removed and are split for quick access. Black powder coat finish, two pieces cover one duct. TIA/EIA compliant. Part # Description CK-45 Center organizer, 45 sp. (84" overall) black finish CK Series Cable Organizers (cont.) Part # Description CK-45C Cable organizer covers, 2 pieces, 45 space (84" overall) black finish End organizer, 45 sp. (84" overall) black finish CK-45E Vertical Cable Manager Full-length cable manager for RLA Series relay racks features abundant cable pass-throughs, cable lacing points, and solid front door with 3point magnetic latch. Part # RLA-CC Horizontal Cable Managers These 19" cable managers provide a strong yet attractive method for organizing patch cords and maintaining required bend radius. Finished in a durable black powder coat. The D-Ring product provides a creative solution for adding individual D-rings to a rack or on a wall. Mounting holes are rack compatible or can be used to mount directly to any wall material using appropriate fasteners. TIA/EIA compliant. Part # Description HCM-1 HCM-1D HCM-1DR HCM-1DV HCM-1V 1 3/4" 1 3/4" 1 3/4" 1 3/4" 1 3/4" rings 3 1/2" 3 1/2" 3 1/2" HCM-2D HCM-2DR HCM-2DV (1 (1 (1 (1 (1 space) space) space) space) space) Panel Width "micro-clip" style "D-ring" style "D-ring" front and rear "D-ring" style with end rings "micro-clip" style with end 19" 19" 19" 19" 19" (2 space) "D-ring" style (2 space) "D-ring" front and rear (2 space) "D-ring" style with end rings 19" 19" 19" Horizontal Lacer Bars Made from 1/4" diameter rod with flattened ends (model LBP-1R, LBP-1.5 and LBP-1R4) or 3/16" thick aluminum (model LBP-1S), and finished in black powder coat, each bar provides convenient cable tie points. Model LBP-1R4 features a 4" offset and model LBP-1.5 features a 1 1/2" offset for easy viewing of cable identification. Model LBP-1A features a formed "L" shape, generous cable tie slots, and a special coating to protect cable. All lacer bars sold in packs of 10. TIA/EIA compliant. Part # Style Panel Width LBP-1.5 LBP-1A LBP-1R LBP-1R4 LBP-1S LBP-2A LBP-4A LBP-6A 1.5" offset round rod "L" bar Round rod 4" offset round rod Rectangular bar 2" offset "L" bar 4" offset "L" bar 6" offset "L" bar 19" 19" 19" 19" 19" 19" 19" 19" Rackmount Cable Tray Handy horizontal cable tray mounts on any 19" rack or cabinet and neatly routes cable bundles from side-to-side. Turn-downs on sides help maintain cable bend radius. Finished in a durable black powder coat. TIA/EIA compliant. Part # Racking Height HCT-1 HCT-2 1 3/4" (1 space) 3 1/2" (2 space) 153 Racks & Cabinets - Rack Wire Management Versi-Duct® Slotted Duct Cable Management System Provides a simple, versatile solution for fiber and copper cable organization and management. Designed to fit on any standard 19" horizontal equipment rack. Also uses a small number of accessories to achieve a wide range of cable management solutions. Vertical slotted duct comes in 35" or 80" rack lengths in Front Only or Front and Rear configurations with covers. Horizontal slotted duct is available in one-rack (1RU-1.75") or two rack (2RU-3.5") unit sizes. Front Only or Front and Rear configurations with covers. Includes Bend Radius Compliant Router. Part # Description 49265-DV1 49265-FN4 49265-WR1 49265-HNG 49265-EX3 49265-EX1 49265-SL1 49265-SL2 49265-BRK Vertical Channel Divider Bend Radius Compliant Funnel, rear only Cable Retainer, 10 per package Duct Cover Hinge, 4 per package Extended Cover, Front-only 2RU Extended Cover, Front-only 1RU Slack Loop Storage Organizer Slack Loop Storage Organizer, extended (2") Mounting Bracket, 2 per package Versi-Duct® Vertical Cable Management System Designed to route cable and mount onto an industry standard 19" equipment rack. One 83" or two 35" ducts span the length of a standard seven foot rack. The ducts also come with concealing covers and an assortment of cable management acessories. Versatile solution for fiber/copper cable organization and management. Front only and front/rear configurations. Cable concealing covers. Mount on standard 19" equipment racks with top, bottom and side cable entry. Unique spacers allow for 100% fill capacity. Part # Description 49265-CR1 49265-DV2 49265-DV3 49275-VFR 49275-VFO 49266-VFR 49266-VFO Bend-Radius Compliant Router Lateral Channel Divider 4x5 (front) Lateral Channel Divider 4x4 (rear) Vertical Slotted Duct 4x4 rear and 4x5 front (front and rear) 35"H Vertical Slotted Duct 4x5 (front only) 35"H Vertical Slotted Duct 4x4 rear and 4x5 front (front and rear) 83"H Vertical Slotted Duct 4x5 (front only) 83"H Horizontal Patch Cord Organizers Available in 1RU, 2RU and 4RU sizes. The 1RU and 2RU versions route and organize cables. The 4RU organizer includes a shelf for added support of large volumes of patch cords. Part # Height Rings 49253-BCM 49253-LPM 2RU 1RU 4" 4" Rack and Frame Cable Management One- and Two-Position Organizer Panel Two-position cord organizers combines horizontal and vertical distribution rings with individual routing clips for patch cord organization between patch panels. One-position cord organizer is 1RU with vertical distribution rings and individual routing clips. Part # Description 49252-P01 49252-P02 One-Position Two-Position 154 Rack and Frame Cable Management (cont.) Combo Front/Rear Manager Manages front and rear cables/cords in a 2RU standard rack space. Oversized front rings meet largercapacity requirements for patch cords. Rear management maintains bend radius of cables routed from vertical channels. Retention rings and fixed anchor points for 'loose-fit' or tie-wrapped bundles. Part # 49252-PCM Tie Wrap Bar Mounts at the rear of standard EIA racks to support cable bundles and help maintain their bend radius near cable terminations. Fixed anchor points for "loose-fit" wrapped cables. Part # 49258-TWB Vertical Management Components Flexible, customizable front and rear vertical management for varying rack configurations. 'Open ring' system can be arranged and changed as needed, for total customization and on-site adaptability. An optional tie bracket and divider panel can be added to provide cord and cable separation between racks. Part # Description 49260-MR3 3" Vertical Manager Ring (4-pair cable capacity; 180 rear, 250 front) 6" Vertical Manager Ring (4-pair cable capacity; 360 rear, 500 front) Tie Bracket to secure vertical manager ring to adjacent rack 49260-MR6 49261-BKT Vertical D-Rings Patented Cable Manager Ring. Standard EIA hole spacing allows product to be mounted to any standard rack. Flexible material allows arm to rotate 90° so entire cable bundle can be inserted and removed. Rounded edges prevent damage to cable insulation. ¼” mounting hole allows for a variety of screws to secure the D-ring to a surface. Creates a structured pathway and allows for open access. Part # Description CMVDR1 Vertical D-ring outside dimensions 5.7"L x 2"W (145mm x 52mm) Vertical D-ring outside dimensions 3.3"L x 2"W (82mm x 52mm) Vertical D-ring outside dimensions 5.7"L x 3"W (145mm x 83mm) Vertical D-ring outside dimensions 3.3"L x 3"W (82mm x 83mm) Center mounted vertical D-ring for routing cables between two adjacent racks. (Requires 8.25" spacing between the center lines to the adjacent rack's mounting holes). Outside dimensions 5.6"L x 8"W CMVDR1S CMVDR2 CMVDR2S CMVDRC Cable Capacity UTP (.187) Cable Capacity ScTP (.250) Cable Capacity Fiber (3mm) 96 48 252 52 32 132 192 96 504 96 48 252 400 200 1000 Racks & Cabinets - Rack Wire Management IN-Cabinet Cable Managers For managing cable within cabinets 27" or wider. Attach to equipment mounting rails. Two mounting bracket options to facilitate mounting to various cabinet configurations. Snap-on covers included. 40 Rack spaces. Part # Description Capacity CWMPV3440 Duct with side mount bracket, cage nut and screws. Dimensions 72"H x 3"W x 4"D (1828.8 x 76.2 x 101.6) Duct with side mount bracket, cage nut and screw. Dimensions: 72"H x 2"W x 4"D (1828.8 x 50.8 x 101.6) Duct with front mount bracket, cage nut and screws. Dimensions: 72"H x 2"W x 3"D (1828.8 x 50.8 x 76.2) Duct with front mount bracket, cage nut and screws. Dimensions: 72"H x 3"W x 3"D (1828.8 x 76.2 x 76.2) 96 cables .187 dia. CWMPV2440 CWMPV2340 CWMPV3340 60 cables .187 dia. 48 cables .187 dia. 72 cables .187 dia. PatchRunner™ Vertical Cable Management System High density minimizes area required for network, layout, freeing up floor space. Curved cable management fingers support cable as they transition to the vertical pathway elinimating the need for horizontal managers. Individual fingers can be removed without the use of a tool. Fingers align with rack spaces. Slack management spools organize and manage patch cord slack allowing standardization of patch cords. Optional hinged doors. PRV Series - Manages cable on front and rear of rack. PRVF Series - Manages cable on front of rack only. 45 rack spaces. Part # Description Dim. HxWxD in (mm) PRV12 Includes 4 PRSP7 slack spools Includes 4 PRSP7 slack spools Spools are not included 84 x 12 x 16.4 (2133.6 x 304.8 x 416.6) 84 x 8 x 16.4 (2133.6 x 203.2 x 416.6) 84 x 6 x 16.4 (2133.6 x 152.4 x 416.6) 84 x 12 x 9.7 (2133.6 x 304.8 x 246.4) 84 x 8 x 9.7 (2133.6 x 203.2 x 246.4) 84 x 6 x 9.7 (2133.6 x 152.4 x 246.4) PRV8 PRV6 PRVF12 PRVF8 PRVF6 Includes 4 PRSP7 slack spools Incudes 4 PRSP7 slack spools Spools are not included NetManager™ Horizontal Cable Managers Removable front cover hinges 180° up or down. Built-in cable retainers. Integral bend radius control throughout all cable pathways. Pass through holes allow front to rear cabling. Mounts to 19" EIA rack or cabinet. Black. One rack space = 1.75" (44.45mm). Part # Description NCMH2 Horizontal cable manager, front, 3" x 3" (76.2mm x 76.2mm), rear 2" x 5" (50.8mm x 127mm). Snap-on rear cover. Replacement front cover for 2 RU horizontal cable manager Horizontal cable manager, front only, 1.5" x 3" (38mm x 76.2mm) - total width 19" (482.6mm). Horizontal cable manager, front only, 3" x 3" (76.2mm x 76.2mm) - total width 19" (482.6mm). Replacement front cover for 1 RU horizontal cable manager NCMH2-RFC NCMHF1 NCMHF2 NCMH1-RFC NetRunner™ Vertical Cable Management System Large finger openings accommodate up to 24 Cat 6 cables. Integral cable retainers on the end of each finger to help contain cables within each rack unit. Bend radius align with rack spaces to support cables as they transition to the vertical pathway. Dual hinged covers can be opened 110° to the left or right to provide complete access to the cables inside the vertical pathway. Snap-on cable retainers can be placed on to fingers to help retain cable in channel during installation and maintenance. Includes hinged covers, cable retainers, mounting brackets and #12-24 screws. Description WMPV22E WMPVHC45E Front and rear vertical manager Front and rear vertical manager - larger cable capacity Front and rear vertical manager Front only vertical manager Front only vertical manager - larger cable capacity Front only vertical manager NetRunner™ Center Mount Bracket Kit allows mounting to adjacent racks NetRunner™ Side Mount Hardware Kit for use with Panduit DR84, NFR84 and NF4PR84 racks End panel for use with WMPVHC45E Includes 2 panel sections to cover 45 RU on one side End panel for use with WMPV45E Includes 2 panel section to cover 45 RU on one side Rack top trough with waterfall creates pathway above rack - For use with CMR19X84 and WMPV45E/WMPVHC45E WMPV45E WMPVF22E WMPVHCF45E WMPVF45E WMPVCBE WMPVSMK WMPVHC45EP WMPV45EP WMPV45ERTW n/a n/a n/a n/a Type Description 19" Manager, Front and Rear, 1 RU CMPH2 19" Manager, Front and Rear, 2 RU 19" Manager, Front Only, 1 RU D-rings installed on panels. Front Drings: 1.5"H x 3"D (38.1 x 76.2). Rear Dring: 1.5"H x 5"D (38.1 x 127). Width 19" (482.6) D-rings installed on panel. Front D-ring: 3"H x 3"D (76.2 x 76.2). Rear D-ring: 3"H x 5"D (76.2 x 127). Width 19" (482.6) D-rings installed on panel. Front D-ring: 1.5"H x 3"D (38.1 x 76.2). Width 19" (482.6) D-rings installed on panel. Front D-ring: 1.5"H x 5"D (38.1 x 127). Width 19" (482.6) D-rings installed on panel. Front D-ring: 3"H x 3"D (76.2 x 76.2). Width 19" (482.6) D-rings installed on panel. Front D-ring: 3"H x 5"D (76.2 x 127). Width 19" (482.6) Snap-on cover for 1 RU D-ring panels. Width 19.5" (495). Snap-on cover for 2 RU D-ring panels. Width 19.5" (495). CMPHF2 19" Manager, Front Only, 2 RU 1 CMPHH2 19" Manager, Front Only, 2 RU 2 CMPH1C Optional Covers CMPH2C Optional Covers 1 45 n/a CMPH1 19" Manager, Front Only, 1 RU 2 45 22 45 Part # CMPHHF1 2 22 45 Open-Access™ Horizontal Cable Managers D-ring managers provide an open and efficient way to manage cable. Patented D-ring design provides flexibility for easy moves, adds and changes. Optional snap-on cover. Pass through holes allow front to rear cabling. Mount to 19" EIA racks and cabinets. Hardware included. CMPHF1 Rack Spaces No. of Rack Spaces Part # 155 Racks & Cabinets - Rack Wire Management PATCHLINK™ Horizontal Cable Managers Lightweight plastic construction provides durability and easy installation. Patented dual hinged cover allows cable access without removing cover. Rounded edges on fingers protect cables from snags and damage. Flexible fingers allows easy installation and removal of cables. Increased finger spacing provides larger area for high performance Cat 6 cables. Pass through holes allow front to rear cabling. Mount to standard 19" EIA racks and cabinets. Covers, #12-24 and M6 mounting screws included. Cable Management Panels & Rings Designed for 19" cabinets. Material is sheet steel. Black. Part # Description 687844 688188 677845 678189 169950 676844 1U, with 5 hooks 2U, with 5 hooks 1U, panel trunking type with cover 2U, panel trunking type with cover Rack mount cable manager Cable management ring, 20 rings per bag Part # Description WMP1E Front pathway 3"H x 3"D (76.2 x 76.2) - Rear pathway 2"H x 5"D (50.8 x 127) - Width 19" (482.6) - 2 Rack Spaces WMPF1E Front pathway 3"H x 3"D (76.2 x 76.2) - Width 19" (482.6) - 2 Rack Spaces WMPFSE Front pathway 1.5"H x 3"D (38.1 x 76.2) - Width 19" (482.6) 1 Rack Space Adhesive backing or screw on (screws included). WMPH2E Front pathway 3"H x 3"D (76.2 x 76.2) - Rear pathway 2"H x 5"D (50.8 x 127) - Width 20.2 (513.1) - Includes extended front covers and 2 bend radius clips - 2 Rack Spaces Part # 162548 WMPHF2E Front pathway 3"H x 3"D (76.2 x 76.2) - Width 20.2" (513.1) Includes extended front covers and 2 bend radius clips - 2 Rack Spaces WMPLFSE Front pathway 1.5"H x 2"D (38.1 x 50.8) - Width 19" (482.6) 1 Rack Space WMPLSE Front pathway 1.5"H x 2"D (38.1 x 50.8) - Rear pathway 1"H x 5"D (25.4 x 127) - Width 19" (482.6) - 1 Rack Space WMPSE Front pathway 1.5"H x 3"D (38.1 x 76.2) - Rear pathway 1"H x 5"D (25.4 x 127) - Width 19" (482.6) - 1 Rack Space Cable Managers Horizontal rack mount and vertical mount wire managers which provide an efficient method for organizing patch cords and cabling and at the same time maintaining required bend radius. Durable and quality materials. Mounting holes are compatible for open rack or enclosure mounting applications. Come in black powder coat finish. 19" Horizontal Cable Manager Part # RMS Cable Capacity HC19-01-050 HC19-02-100 HF19-01-050 1 2 1 50 100 50 Vertical Cable Managers Enhanced Horizontal Wire Managers Protects cable and maintain its integrity on a standard 19" rack. High quality injection molded wire managers with a one-inch minimum radius which guards against extensive bending of the cables and increases transmission reliability. Snap-on, injection-molded covers hing down for easy access to patch cords in front of rack. UL94V-0 rated for flammability. Part # Description EHWMN1 EHWMN2 One rack single-sided horizontal wire manager - 1.75" x 3" front One rack dual-sided horizontal wire manager - 1.75" x 3" front and 1.75" x 6" back Two rack single-sided horizontal wire manager - 3.5" x 3" front Two rack dual-sided horizontal wire manager - 3.5" x 3" front and 3.5" x 6" back EHWM1 EHWM2 Vertical Wire Management Brackets It can be mounted on the side of the relay rack as well as between two adjacent racks. Equipped with feed-through holes to move cable from back to front and vice versa. The 4" x 4" duct on the back allows for a smooth transition from HellermannTyton's Lightguide Fiber Optic Protection System's 4" x 4" channel to the relay rack. All designs of wire management brackets perform with the wire management bracket hinge. This hinge allows the cover to remain with the manager. It easily snaps onto the cover and the channel. Once assembled, the hinge permits the cover to open like a door, protecting the wire and cable. Black. Part # Description Dimensions VWMDC4X5BK Dual sided, center mount vertical wire mgr. Dual sided, center mount vertical wire mgr. Dual sided, side mount vertical wire mgr. Dual sided, side mount vertical wire mgr. 35" high 4" x 5" (front) high 4" x 5" (back) 84" high 4" x 5" (front) high 4" x 5" (back) 35" high 4" x 5" (front) high 4" x 5" (back) 84" high 4" x 5" (front) high 4" x 5" (back) VWMDC4X5BK7 Part # Cable Capacity Height VC-06-050 VF-07-050 50 (Each Side) 50 6' 7' Double Finger Duct with Cover Base material is 2mm Aluminum. Paint is electrostatic microfinish, black. Cover and ducts are PVC. Mounting hardware included. Part # Dimensions (inches) Height Cable Capacity per Duct VF-04-100 VF-07-100 VF-07-140 1.6 x 2.4 1.6 x 2.4 2.4 x 3.2 4' 6' 7' 50 50 70 156 Cable Organizer VWMDS4X5BK VWMDS4X5BK7 35" 84" 35" 84" Racks & Cabinets - Rack Wire Management Horizontal Wire Management Brackets Designed to provide cable management horizontally on the front and back of a rack. The single sided bracket provides a channel for only the front or the back on a relay rack and the dual sided bracket provides a channel for both the front and back on a relay rack. The two styles are offered for either one or two rack spaces. Extended length covers. This hinge allows the cover to remain with the bracket. Once assembled, the hinge permits the cover to be opened down and act as a "shelf" for easy cable organization. Black. Cable Management Ring Brackets (cont.) Cable Management Ring Brackets Part # Description Rack Spaces CMR-175-A Ring Ring Ring Ring Ring Ring Ring Ring Ring Ring Ring Ring Ring Ring 1 CMR-175-C CMR-175-D Part # Description Dimensions Rack Units WMB1 Single sided horizontal wire manager Dual sided horizontal wire manager Single sided horizontal wire manager Dual sided horizontal wire manager 3" x 3" (front) 2 CMR-350-B 3" x 3" (front), 2" x 4" (back) 1.5" x 2" (front) 2 CMR-350-C 1 CMR-350-D 1.5" x 2" (front), 1.5" x 4" (back) 1 WMB2 WMBN1 WMBN2 Cable Management Panels Clean and simple solution to eliminate cable clutter on a relay rack. Equipped with metal or plastic hangers, these 19" panels provide fast and easy organization. Rack Space Part # Description Hangers TCMP-2 Horizontal Cable Management Panel - Black Horizontal Cable Manager Black Horizontal Cable Manager Black Horizontal Cable Organizer - Black Horizontal Cable Organizer - Black 24 plastic clips and three metal rings Five plastic rings 1 Five plastic rings 2 Five metal rings 1 Five metal rings 2 THCM1 THCM2 THCO1 THCO2 2 CMR-350-A Part # Description CDP-175 CDP-175-A Panel with 1.5"H x 4"D Duct on Front Panel with 1.5"H x 4"D Duct on Front and Back Panel with 3"H x 4"D Duct on Front Panel with 3"H x 4"D Duct on Front and Back Panel with (2) 3" x 3" Vertical Distribution Rings and Routing Clips Panel with (5) 1.75" x 3" Horizontal Distribution Rings Panel with (5) 1.75" x 3" Horizontal Distribution Rings and 1.5"H x 4"D Duct on Back Panel with (2) 3" x 3" Vertical Distribution Rings, Routing Clips and 1.5"H x 4"D Duct on Back Panel with (2) 3" x 3" Vertical Distribution Rings, (4) 3" x 3" Horizontal Distribution Rings and Routing Clips Panel with (5) 3" x 3" Horizontal Distribution Rings Panel with (5) 3" x 3" Horizontal Distribution Rings and 3"H x 4"D Duct on Back Panel with (2) 3" x 3" Vertical Distribution Rings, (4) 3" x 3" Horizontal Distribution Rings, Routing Clips and 3"H x 4"D Duct on Back CDP-350 CDP-350-A CMP-175 CMP-175-AD 10-32 Rack Mount Hardware - Package of 100 CMP-175-D CMP-350 CMP-350-A CMP-350-AD CMP-350-D Part # RMH-1032 Blank Filler Part # Dimensions inches (W x H) BFP-19175 BFP-19350 BFP-19525 BFP-19700 BFP-19875 19 19 19 19 19 x x x x x 1 1 2 2 2 2 Rack Mount Patch Cord and Cable Management Panels Provides a simple means of organizing and managing cables, either on the front or rear of an equipment rack or enclosure. All panels allow management and routing of both bundled and individual cables. Cable management panels are available in 1.75 inch high (1 rack space) and 3.50 inch (2 rack spaces) and are supplied with mounting hardware. CMP-175-A Cable Management Ring Brackets Ring brackets can be mounted to the front or rear of a rack, to provide both vertical and horizontal cable management. Brackets can be specified in either one or two rack-space sizes, and are offered in 3 and 6-inch depths for accommodating various cable bundle sizes. Blank filler panels are used in the rack to fill-in open rack spaces that are not utilized. Bracket with 1.5"H x 3"D Horizontal on 1.75"H Rack Mount Bracket Bracket with 1.5"H x 6"D Horizontal on 1.75"H Rack Mount Bracket Bracket with 2.5"H x 6"D Horizontal on 1.75"H Rack Mount Bracket Bracket with 1.5"H x 3"D Horizontal on 3.50"H Rack Mount Bracket Bracket with 2.5"H x 3"D Horizontal on 3.50"H Rack Mount Bracket Bracket with 1.5"H x 6"D Horizontal on 3.50"H Rack Mount Bracket Bracket with 2.5"H x 6"D Horizontal on 3.50"H Rack Mount Bracket Rack Spaces 1 1 2 2 1 1 1 1 2 1 2 2 1.75 3.50 5.25 7.00 8.75 157 Racks & Cabinets - Hardware & Misc. CL Series Cable Ladders and Accessories Ladder sections individually boxed with handles for ease of transport. Compatible with most popular brands and accessories of cable ladders. Works on both new and existing installations. Highly scratch resistant, double coated in black powder coat. A full line of hardware and accessories available. Utility Panel Give your drill a rest - these panels are pre-punched with plenty of slots. This economical panel is capable of mounting everything from electrical boxes to power strips. 16-gauge flanged steel construction, black powder coat finish, occupies 1 rack space (1 3/4"). TIA/EIA compliant. Ladder Sections Part # UP1 Part # Description CLB-6 CLB-6-12 CLB-10 CLB-10-12 6' long x 12" wide straight section, black 6' long x 12" wide straight section, black, 12 in pack 10' long x 12" wide straight section, black 10' long x 12" wide straight section, black, 12 in pack 90 Degree Horizontal Bend 90 degree horizontal bend. 12" wide. Color is black. Part # CLB-90HB Casters Heavy duty casters bolt directly to the bottom of Slim 5 racks or can be concealed in a skirted base. Available in locking and non-locking. Casters add 3 3/4" to overall cabinet height. Part # Description 5W 5WL CBS-5 Set of 4 casters Set of 4 casters (2 locking) Skirted base with 4 casters (non-locking) Track Leveler Supports and levels service tracks. Corner Radius Sections Part # TRACKL Part # Description CLB-VI90 CLB-VI90-4 CLB-VO90 CLB-VO90-4 90 90 90 90 degree degree degree degree vertical vertical vertical vertical inside bend, 12" wide, black inside bend, 12" wide, black, 4 in pack outside bend, 12" wide, black outside bend, 12" wide, black, 4 in pack MK Ladder Adaptor Ladder adaptor accommodates most cable ladders. Includes mounting hardware and J-bolts. Required only when mounting ladder parallel to rack. TIA/EIA compliant. Part # MK-LA SRSR Series Rotating Sliding Rail System Pulls out and rotates for equipment servicing. Simplifies equipment installation in cabinet. Shortens installation and service time. Available in 19" and 23" useable depths. Available from 12 space (21") to 24 space (42"). Integral cable management system provided. Locks in place at 0°, 60° and 90° positions for easy installation and servicing. Ball bearing slides allow smooth rollout. Locks closed with included hardware. Up to 300 pound weight capacity, depending on model. Part # Description Useable Depth SRSR-2 SRSR-4 SRSR-X 2 slide 150 lb. capacity 4 slide 300 lb. capacity 4 slide 200 lb capacity 19" 19" 23" Additional Mounting Brackets Use PB-5A brackets to mount MAP power strips in AX-S and SLIM-5 series racks, or to the rackrail of any rack. To mount strips in DWR series wall racks, use PB-DWR brackets. Part # Description PB-5A PB-DWR Brackets to mount MAP power strips on rear rackrail (pair) Brackets to mount MAP power strips in DWR wall racks (pair) 158 RIB Series Riser Bases Time-saving and practical, the RIB Series bases are 2 1/2" high risers which allow you to perform field rough-in procedures prior to the arrival of your racks. Handy as a lower cable chase for passing cables between racks in multi-bay applications, RIB bases feature 1/8" thick fully welded construction and an attractive black powder coat finish. Custom width, depth, and height RIB bases are also available. Part # Description Accommodates RIB-1-MRK-26 RIB-1-MRK-31 RIB-1-WRK-27 RIB-1-WRK-32 RIB-2-MRK-26 RIB-2-MRK-31 RIB-2-WRK-27 RIB-2-WRK-32 RIB-3-MRK-26 RIB-3-MRK-31 RIB-3-WRK-27 RIB-3-WRK-32 RIB-4-MRK-26 RIB-4-MRK-31 RIB-4-WRK-27 RIB-4-WRK-32 RIB-5-MRK-26 RIB-5-MRK-31 RIB-5-WRK-27 RIB-5-WRK-32 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 MRK 26" deep racks MRK/VRK/VMRK 31" WRK 27" deep racks WRK 32" deep racks MRK 26" deep racks MRK/VRK/VMRK 31" WRK 27" deep racks WRK 32" deep racks MRK 26" deep racks MRK/VRK/VMRK 31" WRK 27" deep racks WRK 32" deep racks MRK 26" deep racks MRK/VRK/VMRK 31" WRK 27" deep racks WRK 32" deep racks MRK 26" deep racks MRK/VRK/VMRK 31" WRK 27" deep racks WRK 32" deep racks bay bay bay bay bay bay bay bay bay bay bay bay bay bay bay bay bay bay bay bay riser riser riser riser riser riser riser riser riser riser riser riser riser riser riser riser riser riser riser riser base base base base base base base base base base base base base base base base base base base base deep racks deep racks deep racks deep racks deep racks Racks & Cabinets - Hardware & Misc. Raised-Floor Riser Feet and Support Angles For applications such as those in computer rooms with 12" raised floors, VFEET support feet can be used to raise an entire RIB base up to floor level. To support floor tiles in situations utilizing a RIB/VFEET system, use raised-floor supports. Raised Floor Support Angles Part # For Use With ANGLE-1 ANGLE-2 ANGLE-3 ANGLE-4 ANGLE-5 WANGLE-1 WANGLE-2 WANGLE-3 WANGLE-4 WANGLE-5 RIB-1-MRK-26/31 RIB-2-MRK-26/31 RIB-3-MRK-26/31 RIB-4-MRK-26/31 RIB-5-MRK-26/31 RIB-1-WRK-27/32 RIB-2-WRK-27/32 RIB-3-WRK-27/32 RIB-4-WRK-27/32 RIB-5-WRK-27/32 Description VFEET-1-12 VFEET-2-12 VFEET-3-12 VFEET-4-12 VFEET-5-12 RIB-1 RIB-2 RIB-3 RIB-4 RIB-5 riser riser riser riser riser Part # Fits ERK-Z4 MRK-Z4 VRK-Z4 WRK-Z4 ERK Series MRK, VMRK Series VRK Series WRK Series Copper Buss Bars Solid copper buss bars are 1/8" thick and threaded 10-32. New 1" wide 44 space version available. 2" wide version also available in 12 or 40 space models. Supplied mounting hardware includes nylon isolation washers, bolts and nuts. Riser Feet Part # Seismic Floor Anchor Brackets When properly installed, seismic floor anchor kits bring any WRK, MRK, VRK, VMRK or ERK series enclosure to Zone 4 and Seismic Use Group III upper floor essential equipment rating. Part # Racking Height Width QTY BB-12 BB-40 BB-44-1 21" (12 space) 70" (40 space) 77" (44 space) 2" 2" 1" 1 bar 1 bar 1 bar Document Pocket Store wiring diagrams, schematics, and other vital documents in this convenient steel holder. Fits rear doors of all Middle Atlantic racks. Flush mounting studs included, black powder coat finish. feet feet feet feet feet Part # DOC Caster Base With a 1300 lb. capacity, these caster bases are equipped with heavy duty non-locking 3" swivel wheels. Each base comes with its wheels preinstalled, fits inside rack, and raises total rack height only 3/4". Caster base works with LF leveling feet. Note: Inner platform base and caster base do not fit VMRK-54 and VRK-44-31H racks. Part # Type BS-MRK-26 BS-MRK-31 BS-WRK-27 BS-WRK-32 CBS-MRK-26 CBS-MRK-31 CBS-WRK-27 CBS-WRK-32 CBS-WRK-31 Inner Platform Inner Platform Inner Platform Inner Platform Caster Base Caster Base Caster Base Caster Base Caster Base Leveling Feet Adjustable leveling feet fit steel cabinets (except for VRK series). Hex drive allows for adjustment. Leveling feet also work with caster bases for MRK and WRK series racks. Set of four. Part # LF Fits Base Base Base Base MRK 26" deep MRK 31" deep WRK 27" deep WRK 32" deep MRK 26" deep MRK 31" deep WRK 27" deep WRK 32" deep WRK 31" deep Rack Base Templates Use these handy bottom templates for pre-installation of floor anchor bolts prior to the arrival of the racks. Conveniently keyed to interlock, use two and "leapfrog" them to layout entire bays of racks. Part # Description MRK-TEMP-26 MRK-TEMP-31 WRK-TEMP-27 WRK-TEMP-32 Bottom Bottom Bottom Bottom template template template template for for for for MRK-XX-26 MRK-XX-31 WRK-XX-27 WRK-XX-32 Door Latch Can be user-installed in place of a keylock on all Middle Atlantic doors. Part # Description ACC-KEY KYLK LATCH Additional set of keys for KYLK User installed UD keylock User installed UD latch Ganging Hardware Time-saving ganging hardware provides easy field alignment and joining of multi-bay enclosures. Available hardware includes drift pins, 1/2" magnetized sockets and enough 5/16" flange nuts and bolts to gang up to 10 racks. Part # Description DRIFT GANG-10 MAG-1/2 Set of two drift pins 5/16" nuts/bolts to gang 10 racks Set of two 1/2" magnetic sockets 159 Racks & Cabinets - Hardware & Misc. Captive Washer Screws This specially designed washer-head screw with pre-assembled nylon washer speeds assembly while providing a clean, professional appearance. Heat treated for strength and oiled to resist rust. Contains 3/4" long screws with 10-32 threads. Comes in a reusable plastic jar for convenience. Part # HW500 Truss-Head Hardware These HP series rackscrews are 3/4" long with 10-32 threads and feature an attractive Phillips truss-head for a clean, modern appearance. All screws have a self-guiding pilot point, including factory-installed nylon washers for convenience and are heat-treated for strength and to resist head stripping. Part # Finish QTY HP HPS HP500 Black Black Black 100 pc. 25 pc. 500 pc. in a reuseable jar Cage Nut Hardware Cage nuts fits WRK, MRK and DRK cage-nut style rackrail and accepts 6mm rackscrews to accommodate slide-out servers. Part # Description CN6MM-100 HP-6MM 100 pc. 6mm cagenuts 100 pc. 6mm Phillips head rackscrews 12-24 Hardware Primarily used in telecommunications and data, these 5/8" long 12-24 threaded screws are heat-treated to prevent head stripping. Black oxide finish, complete with nylon washers. 100 pieces. Part # HP-24 SRS Series 19" Sliding Rail System System extends a full 19", making it ideal for smaller millwork and in-wall installations. Up to a 300 lb. weight capacity. Hardware included to lock unit closed. Sizes range from 8 to 20 spaces. Triple-hinged, full-width cable carrier offered for effective cable management. Standard front (from 8 to 20 spaces) and rear (7 space) 10-32 threaded rackrail with marked rackspace increments to speed equipment mounting. System pulls out a full 19", providing rear access to equipment with shallow depths. xx = number of useable spaces, from 8 to 20. Part # Description SRCC SRS2-xx SRS4-xx Optional cable carrier 2 slide 150 lb. capacity 4 slide 300 lb. capacity Rack Rulers A genuinely handy tape measure incremented in both rack spaces (red) and inches (black) down to 1/32" scale. Measuring 2" wide by 96" (8 feet) long, its Mylar-coated retracting steel tape is housed in a tough ABS case with a thumb lock and belt clip. Part # Description DARULER RULER Datatables, charts and contact wiring Audio tables, charts and pinouts Computer Monitor Rackmount Equipped with a hinged front access door and plexiglass front panel, our RM-MM computer monitor rackmount features 4 adjustable clamps which accommodate and secure most 14" to 17" computer monitors. The faceplate includes handles for easy mounting and is finished in black textured powder coat, while the chassis is finished in a clear zinc plating. Interior dimensions are 16 1/2" wide x 14 1/2" deep x 15 3/8" high. TIA/EIA compliant. Racking height is 15 3/4" (9 spaces). Part # RM-MM Fans Featuring smooth, ball bearing design, 115V fans come in 4 1/2" and 10" models. The QFAN quiet fan includes a black guard and is great for minimizing noise. New AXS-FAN features a slim design for mounting in AXS Series racks. Hardware and cord are included with each unit. Part # Size Free Air db Rating Free Air CFM FAN FAN-10 QFAN BMF-FAN10 4 1/2" 10" 4 1/2" 10" 39 46 30 60 95 550 50 825 Telecommunication Rack Grounding Products Part # Description TRGB19 Ground Bar, 19" long, 1 RU, mounts to vertical channels of the Telecommunication Equipment Rack and is used as a grounding bus. Tinned copper #6-32 and 1/4-20 threaded screw holes. Includes hardware. Ground Bar, 19" long, 1 RU, mounts to vertical channels of the Telecommunication Equipment Rack and is used as a grounding bus. Tinned copper #6-32 and 1/4-20 threaded screw holes. Includes hardware. Ground Bar, 15" long, mounts to the top of the 23" Telecommunications Equipment Rack and is used as a grounding bus. Tinned copper, #6-32 and 1/4-20 threaded screw holes. Includes hardware. Ground Bar, 23" long, 1 RU, mounts to vertical channels of the Telecommunication Equipment Rack and is used as a grounding bus. Tinned copper, #6-32 and 1/4-20 threaded screw holes. Includes hardware. Ground Kit - Used to ground individual rack to building network ground. #6 AWG insulated stranded copper 72"L. Includes external lock washers, 1/4-20 screws, H-Tap and cover, lug and anti-oxidizing paste. Accommodates Building Network Ground wire from #1/0-#6 AWG. TRGB191 TRGB23 TRGB231 TRGK672 The Claw The unique dual-size "claw" configuration of this versatile wall-mount cable hanger provides efficient storage for all cables large and small. Convenient side trays hold small items. 16" wide x 3 1/2" deep, black powder coat finish. TRGKE696 Part # CLAW TRGKJ1024 160 dBA dBA dBA dBA Equipment Ground Kit - Mounts to vertical channel of the rack and is used as a connection between equipment jumpers and rack ground bar. #6 tinned solid copper wire 96"L. Includes #12-24 screws, cable clamps, 1/4-20 screws, external lock washers, lug and anti-oxidizing paste. Equipment Ground Jumper Kit - Used to ground equipment to TRGKE696. #10 AWG insulated stranded copper 24"L. Includes H-Tap, cover, ring terminal and anti-oxidizing paste. Racks & Cabinets - Hardware & Misc. Telecommunication Rack Grounding Products (cont.) M6 Cage Nut Set Includes M6 (6 mm) Phillips Screw and Cup Washer. Part # Description TRGKJ4120 Equipment ground jumper kit is used to ground equipment to the building network ground, TRGKE696, or directly to the rack. Cable is #4AWG insulated stranded copper 120" long. Includes #12-24 screws, cable clamps, H-Tap and cover, and anti-oxidizing paste. Mounting Screws Can be used with all Panduit® cable management and patch panel products in addition to any industry standard 19" or 23" components. Aluminum racks feature individually printed rack space numbering. Aluminum racks equipped with pre-installed hardware for quick assembly. Double-sided #12-24 EIA universal mounting hole spacing. #12-24 mounting screws, quantity is 100. Part # 680000 Server Cabinet Ventilation Unit On/Off Switch. 6 Fans. Thermostat for temperature control. Promotes heat dissipation. Air circulation rate: 3.2 meters per 3 minutes. Noise: 47 dBm. CE Certified. Complete with power cords. Material: sheet steel. Part # 686002 19" L Support Bracket Part # S1224-C Hinged Wall Brackets Mount to wall or standard 19" racks. Cable tie slots. Panel rotates from one side for easy access to cabling. Includes write-on labeling area. Accept 19" patch panels, horizontal managers and equipment. Part # Dim. HxWxD inches (mm) Load Rating No. Rack Spaces WBH1 WBH2 1.7 x 20.0 x 6.1 (43.2 x 508 x 154.9) 3.5 x 20.0 x 6.1 (88.9 x 508 x 155.9) 10 lbs. 20 lbs. 1 2 WBH3 5.2 x 20.0 x 6.1 (132.1 x 508 x 154.9) 30 lbs. 3 WBH4 7.0 x 20.0 x 6.1 (177.8 x 508 x 154.9) 40 lbs. 4 WBH2E 3.5 x 20.4 x 15.8 (88.9 x 518.2 x 401.3) 20 lbs. 2 WBH4E 7.0 x 20.4 x 15.8 (177.8 x 518.2 x 401.3) 40 lbs. 4 WBH6E 10.5 x 20.4 x 15.8 (266.7 x 518.2 x 401.3) 60 lbs. 6 Caster Wheels Rotational type. Load capacity per caster = 551 lbs static load. Four each, 2 with brake and 2 without. Part # Description 680060 680080 13 in. deep, silver 19.25 in. deep, silver Hinged Wall Mount Brackets Designed for mounting one or more 19-inch panels and have a 6-inch standoff depth. Constructed from 16-gauge steel with a black polyurethane finish. Brackets have cable access holes on both the rear and sides to allow a variety of cable access configurations. Can be mounted for either right or left hand swing. Part # Dimensions 19"W X 6"D Rack Spaces HWB-175 HWB-350 HWB-525 HWB-700 HWB-875 1.75"H 3.50"H 5.25"H 7.00"H 8.75"H 1 2 3 4 5 Part # 680404 NOTES 161
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021