MPAMB Series Portable Omnidirectional Antennas

MPAMB Series Portable Omnidirectional Antennas
In-building ANTENNAS
Portable Duck Antennas
MPAMB Series Portable Omnidirectional Antennas
The MPAMB portable antennas are designed for indoor wireless applications
requiring multiple band coverage. Each rugged antenna features a compact
“blade” style design and 0-90° articulating knuckle. A no knuckle model is
also available.
Features
• Multi-band performance.
• Ground plane independent design provides added installation flexibility.
• Rugged polycarbonate housing provides added durability for use in
demanding wireless environments.
• Articulating knuckle provides 0º-90º pivot and 180º swivel movement
allowing vertical orientation of the antenna, regardless of the
orientation or position of the wireless device. (All models, except
MPAMB806217ONKMSMA.)
MPAMB series with knuckle
Electrical Specifications
Model
Frequency Range
Gain
MPAMB8062170
806-960 MHz / 1710-2170 MHz
0 dBi
(all frequencies)
MPAMB8062170NKMSMA
806-960 MHz / 1710-2170 MHz
0 dBi
(all frequencies)
MPAMB24495804
2.4-2.5 GHz / 4.94 - 5.85 GHz
2.14 dBi / 4 dBi
MPAMB515804
5.15 - 5.85 GHz
3 dBi
(all frequencies)
MPAMB8062170NK
Mechanical Specifications
Model
Antenna Height
Temperature
Range
Knuckle
Movement
MPAMB8062170
7-5/8” (19.4 cm)
-30°C to +70°C
180° swivel,
0°-90° knuckle
Maximum Power:
5 watts
MPAMB8062170NKMSMA
6.5” (16.5 cm)
-40°C to +85°C
n/a
MPAMB24495804
6” (15.2 cm)
-40°C to +85°C
180° swivel,
0°-90° knuckle
Polarization:
Vertical, linear
MPAMB515804
5.3” (13.4 cm)
-40°C to +85°C
180° swivel,
0°-90° knuckle
Technical Data
Nominal Impedance:
50 ohms
VSWR:
< 2.0:1
Connector Type:
TNC male (MPAMB8062170 only)
Male SMA (MPAMB8062170NKMSMA only)
Reverse Polarity TNC (All other models)
For detailed specifications,
visit http://antenna.pctel.com.
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
113
In-building ANTENNAS
Portable Duck Antennas
Portable Antennas for Data Transfer Applications
These portable rubber duck antennas are designed to cover multiple data
frequencies, including 902-928 MHz ISM, 2400-2483.5 MHz and 5725-5825 MHz
Wi-Fi. Their rugged, flexible design makes them suitable for use in a wide
variety of applications, including office LAN environments, factory floors,
remote telemetry and other harsh environments.
Features
• Ground plane independent, half-wave coaxial dipole design. Provides
improved antenna performance, higher gain and installation flexibility.
• Flexible design provides added durability that allows use in demanding
wireless environments.
• Articulating knuckle provides 0º-90º pivot and 180º swivel movement
allowing vertical orientation of the antenna, regardless of the orientation or
position of the wireless device. (All models except MEXC902SM, MEXE902SM).
Antenna Electrical Specifications
Technical Data
General Specifications:
Portable Antennas
Special Features:
360° swivel, 0°-90° knuckle
Maximum Power:
50 watts
Polarization:
Vertical, linear
Model
Frequency Range
Factory Tuned
Frequency
Gain
MEXE902RPSM
902-960 MHz
915 MHz
2.0 dBi
MHWS2400MSMA
2400-2483.5 MHz
2450 MHz
2.0 dBi
MHWS2400MTNCRP
2400-2483.5 MHz
2450 MHz
2.0 dBi
Mechanical Specifications
Model
Connector Type
Antenna Height
Temperature Range
MEXE902RPSM
Reverse Polarity
Male SMA Plug
9.5” (241.3 mm)
-40°C to +85°C
MHWS2400MSMA
Male SMA
4.5” (114.3 mm)
-40°C to +85°C
MHWS2400MTNCRP
Reverse Polarity
TNC Plug
5.7” (144.8 mm)
-40°C to +85°C
Nominal Impedance:
50 ohms
VSWR at Resonance:
< 1.5:1
Wave Length:
1/2 wave
1/4 wave (MEXC902SM only)
Connector Type:
See Mechanical Specifications
For detailed specifications,
visit http://antenna.pctel.com.
114
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
In-building ANTENNAS
Portable Duck Antennas
MHWS2400PTRAMMCX - Portable Antenna
The MHWS2400PTRAMMCX portable rubber duck antenna is designed to cover
2.4-2.5 GHz. Its rugged, flexible design makes it suitable for use in a wide
variety of applications, including office LAN environments, factory floors,
remote telemetry and other harsh environments.
Features
• Ground plane independent, half-wave coaxial dipole design. Provides
improved antenna performance, higher gain and installation flexibility.
• Flexible design provides added durability that allows use in demanding
wireless environments.
• Articulating knuckle provides 0º-90º pivot and 180º swivel movement
allowing vertical orientation of the antenna, regardless of the orientation or
position of the wireless device.
Antenna Electrical Specifications
Model
Frequency
Range
E-plane
Beamwidth
Gain
MHWS2400PTRAMMCX
2.4-2.5 GHz
45º
2.0 dBi
Technical Data
General Specifications:
Portable Antenna
Mechanical Specifications
Special Features:
360° swivel, 0°-90° knuckle
Model
Connector Type
Antenna
Height
Temperature Range
MHWS2400PTRAMMCX
MMCX plug,
right angle
4.5”
(114.3 mm)
-40°C to +85°C
Maximum Power:
50 watts
Polarization:
Vertical, linear
Nominal Impedance:
50 ohms
VSWR:
< 2.0:1
Wave Length:
1/2 wave
Connector at Base:
5 inch RG-178B/U pigtail
For detailed specifications,
visit http://antenna.pctel.com.
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
115
In-building ANTENNAS
Portable Antennas
Wideband/Multi-band Portable Gain Antennas
These wideband/multi-band portable antennas are designed for various
broadband wireless applications. Their rugged, flexible design makes them
suitable for use in a wide variety of applications, including office LAN
environments, factory floors, remote telemetry and other harsh environments.
Features
• Wideband/multi-band coverage with no field tuning reduces number of
antennas required at installation site
• High gain performance
• Ground plane independent design for added installation flexibility
• Flexible design provides added durability
• Articulating knuckle provides 0°-90° pivot and 180° swivel movement
allowing vertical orientation of the antenna
Antenna Electrical Specifications
Model
Frequency Range
E-plane
Beamdwidth
Gain
MHWS24007
2.4-2.5 GHz
40°
9 dBi
MHWS24495803
2.4-2.5 GHz and
4.9-5.8 GHz
40°/35°
3 dBi
Mechanical Specifications
Technical Data
Model
Antenna Height
Temperature Range
MHWS24007
Approximately 15”
-40°C to +85°C
MHWS24495803
Approximately 8”
-40°C to +85°C
General Specifications:
Portable Omnidirectional Antenna
Maximum Power:
50 watts
Polarization:
Vertical, linear
Nominal Impedance:
50 ohms
VSWR:
< 2.0:1
Wave Length:
1/2 wave (MHWS24007)
1/4 wave (MHWS24495803)
Connector Options:
Reverse Polarity TNC (MHWS24007 only)
Reverse Polarity SMA (both models)
*Prefix “B” indicates black.
116
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
In-building ANTENNAS
Ceiling Mount Omnidirectional Antennas
Above Ceiling Mount Diversity
Omnidirectional Antennas
These ultra-flat dual band antennas are designed for above ceiling mount
spatial diversity installations. They are terminated with 3 ft. Plenum rated
pigtails that can be fitted with various types of connectors. An above ceiling
mount MACM (sold separately) is designed to keep the antenna out-of-sight.
UFDD24580303PT
Features
• Efficient omnidirectional diversity performance. Provides the excellent
performance of two or four MAXRAD omnidirectional antennas in a single
low profile design.
• Above ceiling mount (sold separately) makes antenna invisible to
occupied areas.
• Utilizes UL94-V0 materials that provide UL’s high flame retardant ratings
for maximum placement flexibility. Meets stringent building codes.
• Plenum rated cable can be installed in many indoor mounting locations.
UFODAP1200 installed above ceiling
Antenna Electrical Specifications
Model
Frequency
Ranges
Nominal
Gain
Isolation
Between
Antennas
Horizontal
Beamwidth
Vertical
Beamwidth
UFOD24003PT
2400-2500
MHz
3 dBi
> 25 dB
360°
55°
UFODAP1200*
2400-2500
MHz
3 dBi
> 25 dB
360°
55°
UFDD24580303PT
2.4-2.5 GHz
4.9-5.9 GHz
3 dBi
3 dBi
> 25 dB
> 25 dB
360°
360°
55°
40°
Technical Data
Maximum Power Input:
25 watts
20 watts (UFOD24003PT only)
Polarization:
Vertical, linear
Nominal Impedance:
50 ohms
VSWR:
< 2.0:1
Radome Housing:
No radome
Mechanical Specifications
Model
Dimensions
Weight
(Mass)
Temperature
Range
UFOD24003PT
5” L x 10” W x 0.12” H
(12.7 x 25.4 x 0.32 cm)
0.5 lbs
(0.23 kg)
-40°C to +70°C
UFODAP1200*
36” L x 9” W x 9” H (assembled)
26.5” L x 8.5” W x 3” H (shipped)
3.5 lbs
(1.59 kg)
-40°C to +70°C
UFDD24580303PT
9” L x 9” W x 1/8” D
0.75 lbs
-40°C to +70°C
Mounting Method:
Adjustable mounting bracket for
suspended above ceiling installations
(sold separately as part #MACM)
Cable:
Four 3 ft Plenum rated RG-58/U
(UFDD24580303PT only)
Two 3 ft Plenum RG-58/U (UFODAP1200
and UFOD24003)
Connector Options:
(add connector part number
after the PT prefix)
Example: UFOD24003PTNF (model
UFOD24003 with N, female connector)
N female (part #NF)
Reverse Polarity TNC (part #RPTNC)
Reverse Polarity BNC (part #RPBN)
TNC (part #C)
* This model includes MACMAP above ceiling bracket for Cisco AP1200 access points.
PCTEL Broadband Technology Group
For detailed specifications,
visit http://antenna.pctel.com.
WEB: www.antenna.pctel.com
117
In-building ANTENNAS
Ceiling Mount Omnidirectional Antennas
Ceiling Mount Omnidirectional Diversity Antenna
The MCD2400PT combines two flat ceiling mount omnidirectional antennas
in a single housing for efficient spatial diversity installations. This antenna is
designed to cover frequencies from 2400 to 2485 MHz with a VSWR of less than
1.5:1 and an isolation between two elements of more than 20 dB. A dual stud
drop ceiling mount makes for effortless installation. The antenna includes
pigtails that can be terminated with various types of connector options.
MCD2400PT
Technical Data
Features
• Efficient omnidirectional diversity performance. Provides the excellent
performance of two omnidirectional antennas in a single low profile housing.
• Attractive, low profile housing. Blends well in office environments and
other locations where aesthetic considerations are important.
• UL listed materials and cable. Meets strict safety specifications.
• Dual stud drop ceiling mount. Easy to install on standard ceiling tiles or
solid ceiling surfaces.
• Includes side cable exit adapter for solid ceiling mounting.
Maximum Power Input:
50 watts
Polarization:
Vertical, linear
Nominal Impedance:
50 ohms
VSWR:
< 1.5:1
Radome Housing:
UL listed plastic
Mounting Method:
Dual stud mount.
Above ceiling tile mounting bracket is
available for applications requiring no
visibility of the antenna (sold separately).
Side cable exit adapter for solid
ceiling mounting (included).
Cable:
Dual 12” (30.5 cm) Plenum RG-58/U CL2P
MCD2400PT36 includes two 36” (91.4 cm)
Plenum R6-58/U CL2P pigtails
Antenna Electrical Specifications
Model
Frequency
Range
Nominal
Gain
Isolation
Horizontal
Beamwidth
Vertical
Beamwidth
MCD2400PT
2400-2485 MHz
2.5 dBi
> 20 dB
360°
40°
MCD2400PT36
2400-2485 MHz
2.2 dBi
> 20 dB
360°
40°
Mechanical Specifications
Model
Dimensions
Weight (Mass)
Temperature
Range
MCD2400PT
4.25” W x 8.5” L x 0.5” H
(10.8 x 21.59 x 1.27 cm)
1 lb (0.45 kg)
-40°C to +80°C
MCD2400PT36
4.25” W x 8.5” L x 0.5” H
(10.8 x 21.59 x 1.27 cm)
1 lb (0.45 kg)
-40°C to +80°C
Connector Options:
(add connector part number after
the PT prefix)
xample: MCD2400PTNF (model
E
MCD2400PT with N, female connector)
N female (part #NF)
Reverse Polarity TNC (part #RPTNC)
Reverse Polarity BNC (part #RPBN)
TNC (part #C)
For detailed specifications,
visit http://antenna.pctel.com.
118
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
In-building ANTENNAS
Ceiling Mount Omnidirectional Antennas
Multiple Band Ceiling Mount Omnidirectional Antenna
The SWAN8025OM multiband omnidirectional in-building antenna has been
designed to offer a simple solution for multiple wireless indoor applications.
Emphasis has been placed on styling, small dimensions and superior
electrical performance.
It can be used as a singleband, dualband or multiband antenna. Typical
applications covered are TETRA800, AMPS, GSM, DCS, PCS, UMTS and
2.4 GHz WLAN.
Features
•
•
•
•
TETRA 800, AMPS, CDMA GSM, DCS, PCS, UMTS, 2.4 GHz WLAN
Minimum visual impact
Ceiling mounted omnidirectional
Stylish housing
Antenna Electrical Specifications
Model
Frequency Range
Gain
VSWR
SWAN8025OM
806-960 MHz
1710-2170 MHz
2400-2500MHZ
1.5 dBi (800/900 MHz)
2.5 dBi (1700-2500 MHz)
< 1.9:1
SWAN8025OMV1
806-960 MHz
1710-2170 MHz
2400-2500MHZ
1.5 dBi (800/900 MHz)
2.5 dBi (1700-2500 MHz)
< 1.9:1
SWAN8025OMV2
806-960 MHz
1710-2170 MHz
2400-2500MHZ
1.5 dBi (800/900 MHz)
2.5 dBi (1700-2500 MHz)
Technical Data
Maximum Power:
50 watts
Polarization:
Vertical
< 1.9:1
Nominal Impedance:
50 ohms
Color:
White
Mechanical Specifications
Radome Housing:
ABS
Model
Cable
Connector
Dimensions
Weight
SWAN8025OM
9.84” (25 cm)
N socket
7.1 X 2.4”
(180 x 62 mm)
285 g
SWAN8025OMV1
N/A
Panel Mount
N socket
7.1 X 2.4”
(180 x 62 mm)
285 g
SWAN8025OMV2
9.84” (25 cm)
IP65 Rated
N socket
7.9 X 2.7”
(20.1 x 6.8 cm)
0.57 lbs 0.26 kg
PCTEL Broadband Technology Group
Mounting Method:
Ceiling Mount (3 screws included)
For detailed specifications,
visit http://antenna.pctel.com.
WEB: www.antenna.pctel.com
119
In-building ANTENNAS
Ceiling Mount Omnidirectional Antennas
In-building DPMR Ceiling Mount Omnidirectional Antennas
The DPMR omnidirectional in-building antennas have been designed for local
area tunnel and in-building applications. They are custom designed for Digital
PMR frequencies and provide excellent performance in confined space frames
making them suitable for indoor applications.
Features
•
•
•
•
DPMR applications
Minimum visual impact
Ceiling mounted omnidirectional
Stylish housing
Antenna Electrical Specifications
Technical Data
Max Power Handling:
20 watts
Polarization:
Vertical
Impedance:
50 ohms
Model
Frequency Range
Gain
VSWR
SWAN380OM
380-400 MHz
0 dBi
< 2.0:1
SWAN380OMV1*
380-400 MHz
0 dBi
< 2.0:1
SWAN410OM
410-430 MHZ
0 dBi
SWAN470OM
470-490 MHZ
0 dBi
< 2.0:1
SWANSS1800C1V1
1710-1880 MHz
1920-2170 MHZ
3 dBi
< 1.9:1
SWANDS1719C1V1**
1710-1880 MHz
1920-2170 MHZ
3 dBi
< 1.9:1
VSWR:
< 2.0:1
Color:
White
Radome:
ABS
Base:
Aluminum
Cable Tail:
250 mm 086 conformable cable
Connector:
Type N socket
Mounting:
Ceiling mount (3 screws included)
For detailed specifications,
visit http://antenna.pctel.com.
* Ground plane required. For mounting on metal ceiling surfaces.
** Dual Band, Single feed
120
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
In-building ANTENNAS
Ceiling Mount Omnidirectional Antennas
Mechanical Specifications
Model
Cable
Connector
Dimensions
Weight
SWAN380OM
9.84” (25 cm) 086 conformable
N socket
7.9 X 2.7” (20.1 x 6.8 cm)
0.57 lbs 0.26 kg
SWAN380OMV1**
9.84” (25 cm)
N socket
7.9 X 2.7” (20.1 x 6.8 cm)
0.57 lbs 0.26 kg
SWAN410OM
9.84” (25 cm)
N socket
7.9 X 2.7” (20.1 x 6.8 cm)
0.57 lbs 0.26 kg
SWAN470OM
9.84” (25 cm) 086 conformable
N socket
7.9 X 2.7” (20.1 x 6.8 cm)
0.57 lbs 0.26 kg
SWANSS1800C1V1
N/A
Panel Mount N socket
7.9 X 2.7” (20.1 x 6.8 cm)
0.57 lbs 0.26 kg
SWANDS1719C1V1***
N/A
Panel Mount N socket
7.9 X 2.7” (20.1 x 6.8 cm)
0.57 lbs 0.26 kg
* Includes metal ceiling mount
** Dual Band, Single feed
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
121
In-building ANTENNAS
Ceiling Mount Omnidirectional Antennas
Ceiling Mount Omnidirectional Antennas
The MC series of antennas provide a low profile ceiling mount solution for
indoor applications requiring maximum performance with minimum visibility.
They include a Plenum rated pigtail that can be fitted with a wide variety of
connector options. They can be easily mounted to drop ceiling tiles or to a
solid ceiling surface where cable routing access is available.
The MC antennas are available
for various frequency ranges
Technical Data
Maximum Power Input:
50 watts
25 watts (MC24580304PT only)
Features
• Attractive, low profile housing. Blends well in office environments and
other locations where aesthetic considerations are important.
• UL listed materials and cable. Meets strict safety specifications.
• Single hole stud mount or optional side cable exit option. Easy to install
on standard ceiling tiles or solid ceiling surfaces.
• Includes side cable exit adapter for solid ceiling mounting.
• Excellent value: superior performance at a competitive price.
Antenna Electrical Specifications
Polarization: Vertical, linear
Model
Frequency Range
Gain
MC2400PT*
2300-2500 MHz
2.5 dBi
MC24580304PT
2.4-2.48 GHz / 4.94-5.85 GHz
3 dBi / 4 dBi
MC4900PT
4.9-5.9 GHz
2.5 dBi
Nominal Impedance: 50 ohms
VSWR across the Band:
< 2.0:1
Radome Housing: UL listed plastic
Cable: See Mechanical Specifications
Connector Options:
(add connector part number
after the PT prefix)
Example: MC2400PTNF (Model MC2400PT
with N, female connector)
BNC, Male (part #BN)
N, Female (part #NF)
N, Male (part #NM)
Female SMA (part #FSMA)
Reverse Polarity Male SMA (part #MSMA)
Reverse Polarity Felmale SMA
(part #FSMA)
Reverse Polarity TNC Plug (part #MRPC)
TNC, Male (part #C)
Mechanical Specifications
Model
Dimensions
Weight
(Mass)
Temperature
Range
Cable
MC2400PT*
4.25” OD x 0.5” D
10.8 x 1.27 cm
8 oz.
(0.23 kg)
-40°C to +80°C
12” (30.5 cm)
Plenum RG-58/U
MC24580304PT
4.25” OD x 0.5” D
10.8 x 1.27 cm
10 oz.
(0.28 kg)
-40°C to +80°C
18” (45.75 cm
Plenum RG-58/U
MC4900PT
4.25” OD x 0.5” D
10.8 x 1.27 cm
10 oz.
(0.28 kg)
-40°C to +80°C
18” (45.75 cm
Plenum RG-58/U
Mounting Method:
Stud mount, single hole.
Includes side cable exit adapter for solid
ceiling mounting.
Above ceiling tile mounting bracket is
available for applications requiring no
visibility of the antenna (sold separately
as part #MACM).
For detailed specifications,
visit http://antenna.pctel.com.
* This model also available with a 36 inch pigtail.
122
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
In-building ANTENNAS
Ceiling Mount Omnidirectional Antennas
Low Profile Ceiling Mount
Omnidirectional Antennas
The MLPC low profile ceiling mount antennas provide superior pattern
coverage for ceiling mount applications using UHF, 800/900 MHz, PCS and
WLAN frequencies. They are designed to provide industry leading wideband
performance and reliability, with minimum loss and no tuning required. The
innovative design of this series comprises an attractive low profile antenna
installed on a standard ceiling mount public address (P.A.) speaker baffle that
provides a built-in ground plane, and complements the decor in most in-building
applications. They come standard with an N, female bulkhead connector, but a
12” ML195 pigtail option is also available.
MLPC Series, MLPCDB800/1900S
Features
• Wideband coverage. No tuning is required.
• Built-in ground plane. Can be installed on any ceiling tile location without
the need to provide a ground plane.
• Attractive low profile. These antennas easily complement the decor in most
in-building locations.
• Excellent pattern coverage, outstanding performance and reliability.
MLPC450
Antenna Electrical Specifications
Model
Frequency Range
Gain
MLPC450
450-470 MHz
Unity
MLPC800
806-960 MHz
3.0 dBi
MLPCDB800/1900
806-960 MHz
and 1710-2500 MHz
2.0 dBi (at 800 MHz)
3.5 dBi (at 1900-2500 MHz)
MLPC1700
1700-2500 MHz
3.5 dBi
Maximum Power Input:
150 watts
Polarization:
Vertical, linear
Mechanical Specifications
Model
Connector
Dimensions
Weight
(Mass)
Temperature
Range
MLPC450
N, female
12.87” OD x 2.75” H
(32.7 x 6.98 cm)
0.5 lbs
(0.23 kg)
-40°C to +85°C
N, female
12.87” OD x 2.75” H
(32.7 x 6.98 cm)
0.5 lbs
(0.23 kg)
-40°C to +85°C
MLPCDB800/1900
N, female
12.87” OD x 1.87” H
(32.7 x 4.76 cm)
0.5 lbs
(0.23 kg)
-40°C to +85°C
MLPC1700
N, female
12.87” OD x 1.87” H
(32.7 x 4.76 cm)
0.5 lbs
(0.23 kg)
-40°C to +85°C
MLPC800
Technical Data
Nominal Impedance:
50 ohms
VSWR:
< 2.0:1
Radiator Material:
Solid brass radiator
Mounting Method:
Off-white ceiling-mounted P.A.
speaker baffle
Cable:
12” ML195 (MLPC1700PTRPTNC only)
Connector:
See Electrical Specifications
For detailed specifications,
visit http://antenna.pctel.com.
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
123
In-building ANTENNAS
Ceiling Mount Omnidirectional Antennas
Ceiling Mount Bi-directional Antennas
MHA Antenna
The MHA bi-directional indoor antennas are designed for minimum visibility
and efficient bi-directional coverage of PCS, Wi-Fi and 4.9 GHz Poblic Safety
frequencies. These antennas include a Plenum rated pigtail that can be
terminated with various connector options. Their discrete, bi-directional
design makes them ideal for use in hallways and corridors in many types of
applications requiring extended wireless coverage in opposite directions.
Features
• Point-to-point, bi-directional design. Provides extended wireless coverage
in two directions. Ideal for use in long corridors where a more targeted
radiated signal is necessary to achieve adequate coverage.
• Attractive, low profile housing. Blends well in office environments and
other locations where aesthetic considerations are important.
• UL listed materials and cable. Meets strict UL safety specifications.
• Mounting bracket clips to standard one inch wide suspended ceiling tile
rails. Holes provided for screw ceiling mounting (screws not provided).
Antenna Electrical Specifications
Technical Data
Maximum Power Input:
10 watts
25 watts (MHA24580406PT only)
Polarization: Vertical
Model
Frequency Range
Gain
Horizontal
Beamwidth
Vertical
Beamwidth
MHA2400PT
2300-2500 MHz
4 dBi
100°
75°
MHA24580406PT
2.4-2.48 GHz/
4.94-5.85 GHz
4 dBi / 6 dBi
70° / 55°
70° / 55°
Nominal Impedance: 50 ohms
VSWR:
< 2.0:1
Radome Material: UL 94-V0 plastic
Cable: See Mechanical Specifications
Connector Options:
(add connector part number
after the PT prefix)
Female SMA (part #FSMA)
Male SMA (part #MSMA)
Female SMA, reverse threaded (part #FSMART)
Male SMA, reverse threaded (part #MSMART)
TNC, Male (part #C)
Reverse Polarity TNC (part #RPTNC)
Mechanical Specifications
Model
Dimensions
Weight
(Mass)
Temperature
Range
Cable
MHA2400PT
3” W x 2.5” H x 0.45” D
(7.6 x 6.35 x 1.14 cm)
2.6 oz
(0.07 kg)
-40°C to
+71°C
6” (15.2 cm)
Plenum RG-58/U
MHA24580406PT
3” W x 2.5” H x 0.45” D
(7.6 x 6.35 x 1.14 cm)
2.6 oz
(0.07 kg)
-40°C to
+70°C
18” (45.72 cm)
Plenum RG-58/U
Mounting Method:
Mounting bracket clips to standard one inch
wide suspended ceiling tile rails.
Holes are provided for mounting to a flat
ceiling with screws (not included).
For detailed specifications,
visit http://antenna.pctel.com.
124
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
In-building ANTENNAS
Ceiling Mount Omnidirectional Antennas
Wi-Fi Omnidirectional Fiberglass Antenna
The MFB24004CM omnidirectional fiberglass antenna covers 2.4 GHz frequency
bands with a VSWR of less than 1.5:1. It provides 4 dBi gain and features a
built-in matching network that eliminates the need for a ground plane.
This antenna is ceiling mounted with the MMK11 mount.
Features
• U.V. stabilized, pultruded fiberglass radome. Antenna can be utilized in
harsh indoor environments, providing years of trouble-free service.
• Ceiling tile mounting bracket included for easy installation.
MFB24004CM
Antenna Electrical Specifications
Model
Frequency Range
Gain
Bandwidth @
1.5:1 VSWR
Vertical
Beamwidth @
1/2 Power
MFB24004CM
2400-2483 MHz
4 dBi
100 MHz
30°
Technical Data
Mechanical Specifications
Maximum Power:
25 watts
Model
Height
Weight (Mass)
Equivalent Flat
Plate Area
MFB24004CM
10” (25.4 cm)
0.34 lbs (0.15 kg)
0.04 ft2
Polarization:
Vertical
Nominal Impedance:
50 ohms
VSWR:
< 1.5:1
Radome Material:
5/8 inch diameter pultruded
UV-stable fiberglass
Connector:
N, female
Mounting Base Diameter:
1-1/4 inches
Mounting Method (included):
White powder coated ceiling mount
bracket (part #MMK11) is included
For detailed specifications,
visit http://antenna.pctel.com.
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
125
In-building ANTENNAS
Wall Mount Antennas
Wi-Fi Diversity Directional Panel Antenna
The MPD24006XFPT diversity panel antenna covers 2.4 GHz frequencies with a
VSWR of less than 1.5:1. This diversity antenna is designed to obtain maximum
gain and per­for­mance across the band. The printed circuit design is housed
in an attractive, low profile radome made with UL94-V0 materials that meet
strict safety specifications.
Features
MPD24006XFPT on MPAB11 mount
• UL94-V0 plastic and PC board. Provides UL’s high flame retardant rating
allowing maximum placement flexibility. Meets stringent building fire
rating codes.
• Attractive, low profile housing. Blends well with indoor and outdoor
environments where aesthetic considerations are important.
• Adjustable mounting brackets for indoor and outdoor mounting.
Provide maximum flexibility for indoor or outdoor installations.
Antenna Electrical Specifications
Technical Data
Maximum Power Input:
20 watts
Polarization:
Linear, vertical
Nominal Impedance:
50 ohms
VSWR:
< 1.5:1
Model
Frequency
Range
Gain
3 dB Horizontal
Beamwidth
3 dB Vertical
Beamwidth
Typical Port to
Port Isolation
MPD24006XFPT
2300-2500
MHz
6.5 dBi
90°
70°
20 dB
Mechanical Specifications
Model
Dimensions
Weight (Mass)
Temperature
Range
Wind Loading
(frontal)
@100 mph Wind
MPD24006XFPT
5.1” x 4.7” x 1.5”
(12.0 x 11.9 x 3.8 cm)
0.5 lbs (0.23 kg)
-40°C to
+70°C
9.3 lbs
Front-to-Back Ratio:
> 15 dB
Radome Housing:
UL94-V0 plastic
Cable:
36” (91 cm) RG-58/U
Connector:
Reverse Polarity TNC standard
Other connector options available.
Mounting Brackets (sold separately):
MPAB11 short adjustable bracket for wall
or pipe mount
MPAB12 long adjustable corner mount
For detailed specifications,
visit http://antenna.pctel.com.
126
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
In-building ANTENNAS
Wall Mount Antennas
Wi-Fi Wall Mount Diversity
Omnidirectional Antenna
This diversity wall mounted omnidirectional antenna is designed to cover
frequencies from 2400 to 2485 MHz with a VSWR of less than 2:1. The broad
elevation plane radiation pattern has been shaped to direct energy where it is
needed, while suppressing the misdirected upper and lower sidelobe energy.
This antenna is ideal for a wide variety of indoor antenna applications.
Features
• UL listed 94-V0 plastic and Plenum rated RG-58/U cable. Meets strict
safety specifications.
• Includes articulating wall mount bracket for added installation flexibility.
MDO24005PT
Antenna Electrical Specifications
Model
Frequency Range
Gain
H-plane
Beamwidth
E-plane
Beamwidth
MDO24005PT
2400-2485 MHz
5.2 dBi
each
360°
27°
Technical Data
Mechanical Specifications
Power Input:
5 watts
Model
Temperature Range
Dimensions
Weight (Mass)
MDO24005PT
-30°C to 75°C
11” H x 5” W x 1” D
(27.9 x 12.7 x 2.6 cm)
19 oz. (0.54 kg)
Polarization:
Vertical, linear
Nominal Impedance:
50 ohms
VSWR:
< 2.0:1
Radome Housing:
Off-White UV resistant UL94-V0 rated
plastic with ecru/off-white fabric cover
Cable:
Dual 36” white Plenum rated coax
Connector Options:
(add connector part number
after the PT prefix)
Reverse Polarity Male SMA (part
#RPMSMA)
N, female (part #NF)
N, male (part #NM)
Reverse Polarity TNC (part #RPTNC)
Reverse Polarity BNC (part #RPBNC)
Male SMA (part #MSMA)
Mounting Method:
Universal wall and pipe adjustable
mounting bracket (included)
For detailed specifications,
visit http://antenna.pctel.com.
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
127
In-building ANTENNAS
Wall Mount Antennas
Directional Panel Antennas
The MAXRAD directional panel antennas are designed to cover various
frequencies with a VSWR of less than 1.5:1, obtaining maximum gain with
an attractive, low-profile package. All models provide efficient and stable
performance across the band and can be mounted indoors or outdoors.
MP24008XFPT
Features
• PCB design. Provides best performance-to-price ratio.
• UL94-V0 plastic and PC board conform to UL’s high flame retardant
rating, allowing maximum placement flexibility. Meets stringent building
code requirements.
• Attractive, low profile housing. Blends well with indoor and outdoor
environments where aesthetic considerations are important.
• Corner exit RG-58/U pigtail design. Permits the panel to be mounted in
vertical or horizontal polarity.
• Adjustable mounting brackets for indoor installation are included.
Indoor corner mounting bracket and heavy duty outdoor mounting
brackets are also available. These provide maximum flexibility for indoor
our outdoor installations.
MP24580809PT
on MPAB11 Mount
Technical Data
Maximum Power Input:
20 watts
Polarization:
Vertical or horizontal, linear (except MP24012CPLXFPT)
Left hand circular (Model MP24012CPLXFPT and MP9026CPLXFPT)
Right hand circular (MP9026CPRXFPT only)
Nominal Impedance: 50 ohms
VSWR: See Electrical Specifications
MP24012CPLXFPT
on MPAB12 Corner Mount
Radome Material: UL94-V0 plastic 
Lightning Protection: DC grounded
Cable: See Mechanical Specifications
Connector Options:
N female (part #NF) is standard. Please consult factory for other connector options.
Mounting Method:
Adjustable azimuth/elevation MPAB11 mount is included with 5.1” x 7.7” x 1.5”
housing panels.
Adjustable azimuth/elevation MPAB12 indoor corner mount is sold separately.
For detailed specifications, visit http://antenna.pctel.com.
128
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
In-building ANTENNAS
Wall Mount Antennas
Antenna Electrical Specifications
Model
Frequency Range
Gain
VSWR
3 dB Horizontal
Beamwidth
3 dB Vertical
Beamwidth
Front-to-Back
Ratio
MP8066XFPT
806-960 MHz
8.1 dBi
< 1.5:1
70°
60°
> 17 dB
MP8906XFPT
890-960 MHz
8.6 dBi
< 1.5:1
70°
60°
> 17 dB
MP9027XFPT
902-928 MHz
9.1 dBi
< 1.5:1
65°
65°
> 17 dB
MP9026CPLXFPT
902-928 MHz
8.5 dBic
< 1.5:1
65°
65°
> 20 dB
MP9026CPRXFPT
902-928 MHz
8.5 dBic
< 1.5:1
65°
65°
> 20 dB
MPMB80621MPTC
806-960 MHz
1710-2170 MHz
5 dBi
7.5 dBi
< 2.0:1
< 2.0:1
70°
75°
67°
55°
> 15 dB
> 20 dB
MP19013PT
1850-1990 MHz
12.5 dBi
< 1.5:1
40°
35°
> 18 dB
MP24008XFPT
2300-2500 MHz
8.5 dBi
< 1.5:1
60°
60°
> 15 dB
MP24013XFPT
2300-2500 MHz
13.0 dBi
< 1.5:1
35°
35°
> 18 dB
MP58013XFPT
5725-5875 MHz
12.5 dBi
< 1.5:1
42°
28°
> 23 dB
MP24580809PT
2.4-2.48 /
4.94-5.85 GHz
8 dBi / 9 dBi
< 2.0:1 / < 2.0:1
60°/ 50°
60°/ 40°
> 22 dB / > 15 dB
Mechanical Specifications
Model
Dimensions
Weight (Mass)
Temperature
Range
Cable
MP8066XFP
8.8” x 8.1” x 1.6” (22.4 x 20.6 x 4.06 cm)
1.2 lbs (0.54 kg)
-40°C to +70°C
12” RG-58/U
MP8906XFPT
8.8” x 8.1” x 1.6” (22.4 x 20.6 x 4.06 cm)
1.2 lbs (0.54 kg)
-40°C to +70°C
12” RG-58/U
MP9027XFPT
8.8” x 8.1” x 1.6” (22.4 x 20.6 x 4.06 cm)
1.2 lbs (0.54 kg)
-40°C to +70°C
12” RG-58/U
MP9026CPLXFPT
8.8” x 8.1” x 1.6” (22.4 x 20.6 x 4.06 cm)
1.2 lbs (0.54 kg)
-40°C to +70°C
12” RG-58/U
MP9026CPRXFPT
8.8” x 8.1” x 1.6” (22.4 x 20.6 x 4.06 cm)
1.2 lbs (0.54 kg)
-40°C to +70°C
12” RG-58/U
MPMB80621MPTC
8.8” x 8.1” x 1.6” (22.4 x 20.6 x 4.06 cm)
1.2 lbs (0.54 kg)
-40°C to +70°C
3’ ( 91.4 cm) RG-58/U
MP19013PT
8.8” x 8.1” x 1.6” (22.4 x 20.6 x 4.06 cm)
1.2 lbs (0.54 kg)
-40°C to +70°C
12” (30.5 cm) RG-58/U*
MP24008XFPT
5.1” x 4.7” x 1.5” (12.9 x 11.9 x 3.8 cm)
0.5 lbs (0.23 kg)
-40°C to +70°C
12” (30.5 cm) RG-58/U*
MP24013XFPT
8.8” x 8.1” x 1.6” (22.4 x 20.6 x 4.06 cm)
1.2 lbs (0.54 kg)
-40°C to +70°C
12” (30.5 cm) RG-58/U*
MP58013XFPT
5.1” x 4.7” x 1.5” (12.9 x 11.9 x 3.8 cm)
0.5 lbs (0.23 kg)
-40°C to +70°C
6” (15.25 cm)
.141 semi-rigid*
MP24580809PT
5.1” x 4.7” x 1.5” (12.9 x 11.9 x 3.8 cm)
0.5 lbs (0.23 kg)
-40°C to +70°C
12” (30.5 cm)
Plenum Rated ML195
* UL910 rated cable optional.
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
129
In-building ANTENNAS
Panel Antennas
Low Profile Impact Directional
Panel Antennas
The SWAN Directional PMR antennas have been designed for local area tunnel
and in-building applications. The antennas are custom designed for Digital
PMR frequencies and provide excellent performance in exceptionally confined
space frames making them extremely suitable for indoor applications.
Suitable for wall or ceiling mounting.
SWAN55410
SWANSS series antenna
(with swivel)
Technical Data
Maximum Power:
25 watts for 380-490 MHz models
50 watts for 806-960 Mhz models and for
multiband models
20 watts for 1710-2170 MHz models
Polarization:
Vertical, linear
Nominal Impedance: 50 ohms
VSWR at Resonant Point: See Electrical
Specifications
Front-to-Back Ratio: 8 dB
Features
•
•
•
•
•
•
Digital PMR applications
Stylish molded housing
IP 66 rated
CDMA applications
Single frequency
Flexible mounting- wall or ceiling
•
•
•
•
•
Linear polarized
Broadband, DCS, UMTS
AMPS, TETRA 800, GSM, DCS, PCS, UMTS
Flexible mounting- flush or pivot
Low profile
Antenna Electrical Specifications
-3dB
-3dB
H-Plane
E-Plane
Beamwidth Beamwidth
Model
Frequency Range
Gain
VSWR
SWANDS80183G1W3
1710-1880 MHz/
1920-2170 MHZ
105°/70°
130°/55°
3 dBi < 1.7:1
SWANSS380W4
380-400 MHZ
130°
110°
4 dBi < 1.5:1
SWANSS380C4
380-400 MHZ
130°
110°
4 dBi < 1.5:1
SWANSS410W4V1
410-430 MHZ
130°
110°
4 dBi < 1.5:1
SWANSS450W4
450-470 MHZ
130°
110°
4 dBi < 1.5:1
SWANSS450C4V1
450-470 MHZ
130°
110°
4 dBi < 1.5:1
Radome Material: White UV resistant PC/
ABS polycarbonate
SWANSS450W4V1
450-470 MHZ
130°
110°
4 dBi < 1.5:1
SWANSS824G3C2V1
824-894 MHZ
57°
43°
3 dBi < 1.5:1
Base Material: Aluminum
SWANDCS3G1C2V1
1710-2170 MHZ
72°
50°
7 dBi < 1.5:1
Downtilt: 0-45° adjustable
Panning: +/-15° adjustable
Front-to-Back ratio: 8 dB (for 380-490 MHz
models only)
Termination: 9.8” (250 mm) cable
Connector Type: Type N socket
Mounting Method:
Mold brackets for flush or pivot mounting
for wall applications.
Threaded studs and wing nuts for ceiling
applications.
“SS” indicates pivot mount applications.
For detailed specifications, visit
http://antenna.pctel.com.
130
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
In-building ANTENNAS
Panel Antennas
Mechanical Specifications
Model
Cable
Connector
Dimensions (L x W x D)
Weight
SWANDS80183G1W3
9.84” (25 cm)
N socket
8.5” x 5.2” x 1.2” (21.7 x 13.3 x 0.31 cm)
0.91 lbs
0.42 kg
SWANSS380W4
9.84” (25 cm)
N socket
11.6” x 8.3” x 2” (29.5 x 21.1 x 5.2 cm)
1.7 lbs
0.75 kg
SWANSS380C4
9.84” (25 cm)
N socket
11.6” x 8.3” x 2” (29.5 x 21.1 x 5.2 cm)
1.7 lbs
0.75 kg
SWANSS410W4V1
9.84” (25 cm)
N socket
11.6” x 8.3” x 2” (29.5 x 21.1 x 5.2 cm)
1.7 lbs
0.75 kg
SWANSS450W4
9.84” (25 cm)
N socket
11.6” x 8.3” x 2” (29.5 x 21.1 x 5.2 cm)
1.7 lbs
0.75 kg
SWANSS450C4V1
9.84” (25 cm)
N socket
11.6” x 8.3” x 2” (29.5 x 21.1 x 5.2 cm)
1.7 lbs
0.75 kg
SWANSS450W4V1
9.84” (25 cm)
N socket
11.6” x 8.3” x 2” (29.5 x 21.1 x 5.2 cm)
1.7 lbs
0.75 kg
SWANSS824G3C2V1
15” (38.1 cm)
N socket
7.9” X 2.7” (20.1 x 6.8 cm)
0.57 lbs
0.26 kg
SWANDCS3G1C2V1
9.84” (25 cm)
N socket
7.9” X 2.7” (20.1 x 6.8 cm)
0.57 lbs
0.26 kg
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
131
In-building ANTENNAS
Tape Mount Omnidirectional Antennas
Omnidirectional Tape Mount
The MIG line of omnidirectional tape mount antennas cover multiple
frequencies with a VSWR of less than 2:1. Their rugged design accommodates
a wide variety of applications including office LAN environments, factories,
remote telemetry and other harsh environments where a compact, stick-on
mount antenna solution is needed. They utilize 3M® very high bond tape for
quick, easy mounting. An optional desktop base is available and sold separately.
MIG24
Features
• High bond tape mount provides mounting flexibility for various applications,
including computer monitors, hand held devices, cashier terminals, glass, etc.
• Rugged, ultra thin housing design withstands heavy use and provides
minimum visibility.
• Can be used for fixed or mobile applications. Provides maximum flexibility
and versatility.
• Desktop base mount makes it ideal for use in office and home environments
(sold separately).
• Ceiling tile bracket included for ceiling tile suspension (MIG2458 only).
The MIG antennas can be utilized
for a wide variety of wireless
Wi-Fi applications.
Technical Data
Maximum Power: 5 watts
Polarization: Vertical, linear
Nominal Impedance: 50 ohms
VSWR: See Antenna Electrical Specifications
Color:
White (WMIG Models)
Black (MIG Models)
Cable: See Mechanical Specifications
Connector Options:
(add connector part number after the PT prefix)
Example: MIG2425NF (Model MIG2425 with N, female connector)
Male N (part #UN with ML100 cable)
Female SMA (part #FSMA)
Male SMA (part #MSMA)
Male TNC (part #C)
Reverse Polarity TNC (part #RPC)
MC Lucent connector (part #RALU)
Micro-miniature connector (part #MMCX)
MCX connector (part #MCX)
Mount Method (hardware included):
3M® high bond tape
Ceiling mount bracket (MIG2458 only)
Black (MIGBASE) or white (WHIGBASE)
Desktop base mount (5.5” L x 4” W ; 2.7 oz) (sold separately)
For detailed specifications, visit http://antenna.pctel.com.
132
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
In-building ANTENNAS
Tape Mount Omnidirectional Antennas
Antenna Electrical Specifications
Model
Frequency Range
Gain
VSWR
MIG2425
2400-2686 MHz
4 dBi
< 1.7:1 on glass, < 2:1 in free space
MIG24PT72
2400-2500 MHz
2 dBi
< 1.7:1 on glass, < 2:1 in free space
WMIG24PT72
2400-2500 MHz
2 dBi
< 1.7:1 on glass, < 2:1 in free space
MIG2458
2.4-2.5 GHz / 5.15-5.825 GHz
0 dBi / 3 dBi
< 2:1 / < 2:1
WMIG52PT72
5.15-5.35 GHz
3 dBi
< 1.7:1 on glass, < 2:1 in free space
MIG58
5.725-5.825 GHz
6 dBi
< 1.7:1 on glass, < 2:1 in free space
WMIG58PT72
5.725-5.825 GHz
3 dBi
< 1.7:1 on glass, < 2:1 in free space
Mechanical Specifications
Model
Dimensions
Weight (Mass)
Temperature Range
Cable
MIG2425
5.7” L x 1” W x 0.1” D
(144.8 x 25.4 x 2.54 mm)
0.14 lbs (0.064 kg)
-40°C to +85°C
1.5’ (457.2 mm) ML100A
MIG24PT72
5.7” L x 1” W x 0.1” D
(144.8 x 25.4 x 2.54 mm)
0.14 lbs (0.064 kg)
-40°C to +85°C
6’ (1,828.8 mm) ML100A
WMIG24PT72
5.7” L x 1” W x 0.1” D
(144.8 x 25.4 x 2.54 mm)
0.14 lbs (0.064 kg)
-40°C to +85°C
6’ (1,828.8 mm) ML100A
MIG2458
5.7” L x 1” W x 0.1” D
0.14 lbs (0.064 kg)
-40°C to +85°C
6’ (1,828.8 mm) ML100A
WMIG52PT72
5.7” L x 1” W x 0.1” D
(144.8 x 25.4 x 2.54 mm)
0.14 lbs (0.064 kg)
-40°C to +85°C
6’ (182.8 cm) ML100A
MIG58
5.7” L x 1” W x 0.1” D
(144.8 x 25.4 x 2.54 mm)
0.14 lbs (0.064 kg)
-40°C to +85°C
1.5’ (457.2 mm) ML100A
WMIG58PT72
5.7” L x 1” W x 0.1” D
(144.8 x 25.4 x 2.54 mm)
0.14 lbs (0.064 kg)
-40°C to +85°C
6’ (182.8 cm) ML100A
Accessories
Model
Description
Dimensions
Weight (Mass)
Color
MIGBASE
Desktop mount base for black MIG antenna
5.5” L x 4” W
2.7 oz
Black
WMIGBASE
Desktop mount base for white MIG antenna
5.5” L x 4” W
2.7 oz
White
MIG Antennas and MIG bases are also available as kits. To order as a kit, replace the prefix MIG or WMIG for MIGB or WMIGB in
the above part numbers. For example: WMIGB24PT72RAMMCX indicates a white MIG with a 72” pigtail, MMCX connector and
a white desktop base.
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
133
In-building ANTENNAS
Miniature Stud Mount Omnidirectional Antenna - Wi-Fi Data Reading
Miniature Stud Mount Omnidirectional
Antenna for Wi-Fi Applications
The MMSO2300 miniature omnidirectional antenna covers frequencies from
2300-2500 MHz with a VSWR of less than 1.5:1. This ground-plane dependent
antenna is designed to go virtually undetected while providing dependable WiFi data throughput. It utilizes a bulkhead stud mount and hardware for secure
permanent installations and includes a 3” RG-188A/U pigtail.
Features
• Miniature 1.3 inch housing. Provides minimum visibility for areas prone
to theft or vandalism.
• Bulkhead stud mount secures the antenna for permanent installations,
reducing the probability that the antenna will be stolen.
• Excellent performance with a VSWR of less than 1.5:1 for dependable
wireless data coverage in a very low profile design.
Antenna Electrical Specifications
Technical Data
Maximum Power:
10 watts
Polarization:
Vertical, linear
Nominal Impedance:
50 ohms
Model
Frequency Range
Gain
MMSO2300
2300-2500 MHz
Unity
Mechanical Specifications
Model
Dimensions
Weight
(Mass)
Temperature
Range
MMSO2300
1.34 “ H x 0.75” OD base
with 0.63” flats
(34.04 x 19.05 x 16.02 mm)
0.4 oz
(0.015 kg)
-30° to +80 °C
VSWR:
< 1.5:1
Color:
Black
Radome Housing:
Delrin, UV resistant
Cable:
3” (76.2 mm) RG-188A/U flying lead
Other cable lengths and connector
options are available.
Mounting Method:
1/4-28 stud mount, lock washer, jam
nut and o-ring seal provided mounts to
surfaces up to 0.25” thick
For detailed specifications,
visit http://antenna.pctel.com.
134
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
In-building ANTENNAS
(sub info)
Surface Mount
Antenna
Omnidirectional
Type Header
Antennas
Enclosure Mounted Multi-Band Low Profile
Vertical Antenna NEW
The WMLPVIDB244958PTRPC antenna provides superior pattern coverage for
fixed applications operating in 2400-2500 MHz, as well as 4900 to 5825 MHz.
This design provides industry leading wideband performance and reliability,
with minimum loss and no tuning required. It features an attractive, compact
package that is ideal for indoor applications requiring minimum visibility.
Antenna Electrical Specifications
Frequency
Range
Nominal
Gain
H-Plane
Beamwidth
E-Plane
Beamwidth
2400-2500 MHz
4 dBi
360°
35° Nominal
4900-5825 MHz
4 dBi
360°
20° Nominal
Mechanical Specifications
Technical Data
Cable
Dimensions
Weight
(Mass)
General Specifications:
Multi-band low profile antenna
16” Plenum rated
RG-58/U PL
1.75” x 1.63” OD
6.5 oz
Maximum Power:
10 watts
VSWR:
< 2.0
Nominal Impedance:
50 ohms
Polarization:
Vertical, linear
Radome Material:
UL 94-V0 PC/ABS
Connector Options:
Reverse Polarity TNC
Reverse Polarity SMA
Mounting Method:
Through hole 15/16 dia (0.94)
7/8-14 UNF plastic Hex-Nut
For detailed specifications,
visit http://antenna.pctel.com.
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
135
In-building ANTENNAS
Surface Mount Omnidirectional Antennas
Miniature Bottom Fed 3 dBi Gain
Wi-Fi Antenna NEW
This antenna provides superior pattern coverage for fixed applications
operating in 2400-2500 MHz with a 3.5 dBi gain performance. It is designed
to provide excellent performance and durability with no tuning required.
The antenna features a low profile housing with integral stud mount and
three foot coaxial pigtail terminated with a reverse polarity male
SMA connector.
Antenna Electrical Specifications
Technical Data
General Specifications:
Miniature bottom fed Wi-Fi antenna for
use on metallic ground planes
Maximum Power:
10 watts
VSWR:
< 1.5:1
Model
Frequency
Range
H-Plane
Beamwidth
E-Plane
Beamwidth
Nominal
Gain
MTOC24003PTRPSMA
2400-2500 MHz
360°
35°
3.5 dBi
Mechanical Specifications
Model
Dimensions
Weight
(Mass)
Temperature
Range
MTOC24003PTRPSMA
1.76” x 1.64” OD
6.5 oz
3 ft. Pro-Flex
PlusTM 195
Nominal Impedance:
50 ohms
Antenna Type:
1/4 Wave (all models except 800/900 MHz
collinear)
5/8 Wave over a 1/4 Wave (800/900 MHz
collinear)
Radiator Material:
.062” diameter stainless steel, bright or
black finish
Mount Method:
Through hole 15/16 dia (0.92)
7/8-14 UNF plastic Hex-Nut
For detailed specifications,
visit http://antenna.pctel.com.
136
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
In-building ANTENNAS
Integrated N Male Connector Antennas
Integrated Connector Antennas
The MAXRAD MN integrated connector antennas provide a simple and cost
effective solution for the 900 MHz ISM band. Featuring an N male connector
built into the base, these antennas mount easily to any N female bulkhead or
panel mount connector. The MN antennas are available with a bright or black
chrome finish rod that is removable from the base.
Features
• UV-stable polycarbonate base allows years of trouble-free use even in harsh
environments
• Broadband frequency coverage. A single antenna covers the entire 900 MHz
ISM band
• Integrated N, male connector. Eliminates the use of an adapter by allowing
direct application to many types of radios
MN9155
Antenna Electrical Specifications
Model
Frequency Range
Gain
(B)MN9153
902-928 MHz
3 dB (with a ground plane)
(B)MN9155
902-928 MHz
5 dB (with a ground plane)
Technical Data
Mechanical Specifications
Model
Antenna Height
(B)MN9153
13.2”
(B)MN9155
22.5”
Maximum Power:
100 watts
Polarization:
Vertical, linear
Nominal Impedance:
50 ohms
VSWR:
< 1.5:1
Base:
Molded Makrolon polycarbonate; black
Radiator Material:
.100” diameter, 17-7 PH stainless steel
rod; bright or black chrome finish
Bushing:
Nickel plated brass
Mount Method:
N male connector built in
For detailed specifications,
visit http://antenna.pctel.com.
*Prefix “B” indicates black.
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
137
In-building ANTENNAS
Ceiling Antenna
MCMI24003FSMA -Miniature
Ceiling Mount Antenna
The MCMI24003FSMA miniature ceiling mount omnidirectional antenna
provides wideband coverage of frequencies from 2.4 to 2.5 GHz without
tuning. This antenna’s minute housing is designed for minimum visibility in
ceiling mount in-building installations.
Features
•
•
•
•
Miniature design is virtually invisible for indoor installations with strict
aesthetic requirements
Made of UL94-V0 materials that conform to UL’s high flame retardant
ratings for maximum placement flexibility
Simple screw mount installation
Excellent gain performance with a low VSWR
Antenna Electrical Specifications
Technical Data
Maximum Power:
10 watts
Polarization:
Vertical, linear
VSWR:
< 1.5:1
Nominal Impedance:
50 ohms
Model
Frequency
Range
Gain
E-plane
Beamwidth
H-plane
Beamwidth
MCMI24003FSMA
2400-2500 MHz
3 dBi
70°
360°
Mechanical Specifications
Model
Dimension
Weight
Temperature
MCMI24003FSMA
1.13” x 1.65”
(2.87 x 4.19 cm)
0.2 oz
0.005 kg)
-40˚C to +80˚C
Connector:
Female SMA (part # FSMA)
Mounting Method:
Holes are provided for mounting to a
flat ceiling with plastic screws (screws
included)
For detailed specifications,
visit http://antenna.pctel.com.
*Prefix “B” indicates black.
138
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
In-building ANTENNAS
Fixed Mount Multi-Band Omnidirectional Antenna
Fixed Mount Multi-Band
Omnidirectional Antenna
NEW
This antenna provides multi-band omnidirectional coverage for fixed
applications operating in AMPS, PCS and Wi-Fi frequencies. Featuring a
durable, very low profile radome and integral stud mount base for through
hole installations, this antenna is ideal for vending machine, meter reading
and other data tracking applications requiring a discrete antenna solution.
The antenna is terminated with two 3-foot low loss cables.
Antenna Electrical Specifications
Model
Frequency
Range
Horizontal
Beamwidth
Vertical
Beamwidth
Peak
Gain
MTOQB8061900WIFI
824-896 MHz,
1850-1990 MHz,
2.4-2485 MHz
360°
360°
360°
40°
25°
24°
2.9 dBi
8.4 dBi
4 dBi
Mechanical Specifications
Model
Dimensions
Weight
(Mass)
MTOQB8061900WIFI
4.4” x 1.5”
(11.18 x 4.06 cm)
0.40 lb
(0.18 kg)
Technical Data
General Specifications:
Bottom fed multi-band antenna for use
on metallic ground planes
Maximum Power:
10 watts
VSWR:
< 1.5 (Wi-Fi)
< 1.67 (AMPS, PCS)
Nominal Impedance:
50 ohms
Polarization:
Linear, vertical
Radome Material:
UV stable plastic
Cable:
Two 3 ft Pro-Flex Plus 195
Connector:
Male SMA (AMPS/PCS)
Reverse Polarity SMA (Wi-Fi)
Mount Method:
Through hole 15/16 dia (0.94) 7/8-14
UNF plastic Hex-nut
PCTEL Broadband Technology Group
PCTEL Broadband Technology Group
WEB: www.antenna.pctel.com
139
WEB: www.antenna.pctel.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement