advertisement
Product Record and Registration . . . . . . . . . . . . . . 2
Important Safety Instructions . . . . . . . . . . . . . . . . . 3
Cooking Recommendations . . . . . . . . . . . . . . . . . . 9
Before Setting Surface Controls . . . . . . . . . . . . . . 11
Setting Surface Controls . . . . . . . . . . . . . . . . . . . . 13
Before Setting Oven Controls . . . . . . . . . . . . . . . . 15
Setting Oven Controls . . . . . . . . . . . . . . . . . . . . . . 16
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . 19
Before You Call . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
PRODUCT RECORD AND REGISTRATION
Product Registration . . . . . . . . . . . . . . . . . . . . . . . . . .2
Product Record and Registration . . . . . . . . . . . . . . . . . 2
Need Help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . 3
Cooking Recommendations . . . . . . . . . . . . . . . . . . . . . 9
Before Setting Surface Controls . . . . . . . . . . . . . . . . 11
Setting Surface Controls . . . . . . . . . . . . . . . . . . . . . . 13
Before Setting Oven Controls . . . . . . . . . . . . . . . . . . 15
Setting Oven Controls . . . . . . . . . . . . . . . . . . . . . . . . . 16
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Oven Baking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Before You Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Questions?
For toll-free telephone support in the U.S.
and Canada call
1-800-944-9044.
For online support and Internet production information visit
http://www.frigidaire.com.
Product Registration
Registering your product with Frigidaire enhances our ability to serve you. You can register online at
http://www.frigidaire.com or by dropping your Product
Registration Card in the mail.
Record model & serial numbers here
Purchase Date
Frigidaire model number
Thank you for choosing Frigidaire.
Important: This Use and Care Guide is part of our commitment to customer satisfaction and product quality throughout the service life of your new appliance. We view your purchase as the beginning of a relationship. To ensure our ability to continue serving you, please use this page to record important product information.
Need Help?
Visit the Frigidaire web site at www.frigidaire.com
Before you call for service, there are a few things you can do to help us serve you better.
Read this Use & Care Manual
This manual contains instructions to help you use and maintain your range properly.
If You Received a Damaged Range...
Immediately contact the dealer (or builder) that sold you the range.
Save Time and Money
Check the section title “Before You Call”. This section helps step you through some common problems that might occur.
If you do need service, help is only a phone call away. Call
Frigidaire Customer Services at 1-800-944-9044.
Frigidaire serial number
Serial Plate Location
Serial plate location: open lower oven drawer (some models) or storage drawer (some models).
2
2017 Electrolux Home Products, Inc.
All rights reserved. Printed in the USA
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this appliance.
This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given.
Do not attempt to install or operate your appliance until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a WARNING or CAUTION statement based on the risk type.
Warnings and important instructions appearing in this guide are not meant to cover all possible conditions and situations that may occur.
Common sense, caution, and care must be exercised with installing, maintaining, or operating your appliance.
DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
WARNING
Indicates a potentially hazardous situation which, if not avoided, may result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
IMPORTANT
Indicates installation, operation, maintenance, or valuable information that is not hazard related.
NOTE
Indicates a short, informal reference – something written down to assist the memory or for future reference.
WARNING
Tip Over Hazard
• A child or adult can tip the range and be killed.
• Verify the anti-tip device has been installed to floor or wall.
• Ensure the anti-tip device is re-engaged to floor or wall when the range is moved.
• Do not operate the range without the anti-tip device in place and engaged.
• Failure to follow these instructions can result in death or serious burns to children and adults.
Range leveling leg
Anti-tip bracket
To check if the anti-tip bracket is installed properly, use both arms to grasp the rear edge of the range back. Carefully attempt to tilt range forward. When properly installed, the range should not tilt forward.
Refer to the anti-tip bracket installation instructions supplied with your range for proper installation.
3
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT INSTRUCTIONS FOR
UNPACKING AND INSTALLATION
IMPORTANT - Read and follow the below instructions and precautions for unpacking, installing, and servicing your appliance:
Remove all tape and packaging before using the appliance. Destroy the carton and plastic bags after unpacking the appliance. Never allow children to play with packaging material. Do not remove the wiring label and other literature attached to the appliance. Do not remove model/ serial number plate.
Proper Installation—Be sure your appliance is properly installed and grounded by a qualified technician. In the United States, install in accordance with the National Fuel Gas Code ANSI
Z223.1/NPFA No. 54, latest edition and National
Electrical Code NFPA No. 70 latest edition, and local electrical code requirements. In Canada, install in accordance with CAN/CGA B149.1 and
CAN/CGA B149.2 and CSA Standard C22.1,
Canadian Electrical code, Part 1-latest editions and local electrical code requirements. Install only per installation instructions provided in the literature package for this appliance.
Cold temperatures can damage the electronic control. When using this appliance for the first time, or when the appliance has not been used for an extended period of time, be sure the appliance has been in temperatures above 32ºF
(0ºC) for at least 3 hours before turning on the power to the appliance.
Never modify or alter the construction of the appliance by removing the leveling legs, panels, wire covers, anti-tip brackets/screws, or any other part of the appliance.
Be sure to have an appropriate foam-type fire extinguisher available, visible, and easily accessible located near the appliance.
For personal safety, this appliance must be properly grounded. For maximum safety, the power cord must be securely connected to an electrical outlet or junction box that is the correct voltage, is correctly polarized and properly grounded, and protected by a circuit breaker in accordance with local codes.
It is the personal responsibility of the consumer to have the appropriate outlet or junction box with the correct, properly grounded wall receptacle installed by a qualified electrician. It is the responsibility and obligation of the consumer to contact a qualified installer to assure that the electrical installation is adequate and is in conformance with all local codes and ordinances.
GROUNDING INSTRUCTIONS
See the installation instructions packaged with this appliance for complete installation and grounding instructions.
WARNING
Avoid fire hazard or electrical shock. Failure to follow this warning may cause serious injury, fire, or death.
Avoid fire hazard or electrical shock. Do not use an adapter plug, use an extension cord, or remove grounding prong from the power cord.
Failure to follow this warning may cause serious injury, fire, or death.
4
IMPORTANT INSTRUCTIONS FOR USING THE
APPLIANCE
WARNING
Storage In or On Appliance—Flammable materials should not be stored in an oven or microwave, near surface burners or elements, or in the storage or warmer drawer (if equipped). This includes paper, plastic, and cloth items, such as cookbooks, plastic ware, and towels, as well as flammable liquids. Do not store explosives, such as aerosol cans, on or near the appliance.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
Never use your appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning and overheating of the appliance.
CAUTION
When heating fat or grease, watch it closely.
Grease may catch fire if it becomes too hot.
Do not use water or flour on grease fires.
Smother fire or flame or use dry chemical or foam-type extinguisher. Cover the fire with a pan lid or use baking soda.
Do not leave children alone - Children should not be left alone or unattended in the area where appliance is in use. They should never be allowed to sit or stand on any part of the appliance, including the storage drawer, lower broiler drawer, warmer drawer, or lower double oven.
Do not store items of interest to children in the cabinets above the appliance or on the backguards of ranges. Children climbing on or near the appliance to reach items could be seriously injured.
Do not allow children to climb or play around the appliance. The weight of a child on an open over door may cause the appliance to tip, resulting in serious burns or other injury. An open drawer when hot may cause burns.
Stepping, leaning, or sitting on the door or drawers of this appliance can result in serious injuries and also cause damage to the appliance.
Never cover any slots, holes, or passages in the oven bottom or cover an entire oven rack with any materials, such as aluminum foil or aftermarket oven liners. Aluminum foil and other liners may trap heat, causing a fire hazard.
Use dry potholders. Moist or damp potholders on hot surfaces may result in burns from steam.
Do not let potholders touch hot cooking areas.
Do not use towels or other bulky cloths.
Do not heat unopened food containers - Buildup of pressure may cause container to burst and result in injury.
Wear proper apparel - Loose-fitting or hanging garments should never be worn while using the appliance. Do not let clothing or other flammable materials contact hot surfaces.
Do not touch surface burners or elements, areas near these burners or elements, interior surfaces of the oven, or the warmer drawer (if equipped). Surface burners and elements may be hot even though they appear cool. Areas near surface burners and elements may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials touch these areas until they are cool. These areas may include the cooktop, surfaces facing the cooktop, oven vent areas, oven door, and oven window.
Do not use oven or warmer drawer (if equipped) for storage.
5
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
Do not attempt to operate the appliance during a power failure. If the power fails, always turn off the appliance. If the appliance is not turned off and the power resumes, electric surface elements may resume operation when power is restored. Once the power resumes, reset the clock and the oven function.
Never leave surface elements unattended. Boilovers may cause smoking and greasy spills that may ignite. A pan that has boiled dry could be damaged and may damage the cooktop.
Do not use a searing grill meant for use with a broiler pan on the cooktop. The searing grill is not designed for use on the cooktop. Doing so may result in a fire.
When you are flaming foods under a ventilating hood, turn on the fan.
IMPORTANT INSTRUCTIONS FOR USING
YOUR RADIANT COOKTOP
Know which knob or key controls each surface heating area. Place cookware with food on the cooking area before turning it on. Turn the cooking area off before removing the cookware.
Cookware handles should be turned inward and not extend over adjacent surface elements — To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of the cookware should be positioned so that it is turned inward, and does not extend over other cooking areas.
Use proper pan size - This appliance is equipped with one or more surface units of different sizes.
Select cookware with flat bottoms that match the surface unit size. Using the proper cookware on the cooking area will improve efficiency.
Glazed cooking utensils— Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for cooktop service without breaking due to the sudden change in temperature. Check the manufacturer’s recommendations for cooktop use.
Improper cookware may break due to sudden changes in temperature. Check the cookware manufacturer’s recommendations for cooktop use.
IMPORTANT INSTRUCTIONS FOR USING
YOUR COIL COOKTOP
Make sure reflector pans or drip bowls are in place - absence of these pans or bowls during cooking may subject wiring or components underneath to damage.
Carefully check the reflector pans, drip bowls, and coils for packaging material. Remove all packaging material before using the cooktop.on the cooking zone will improve efficiency.
Protective Liners - Do not use aluminum foil to line surface drip bowls. Improper use of these liners may result in a risk of electric shock or fire.
Do not immerse or soak removable heating elements—Heating elements should never be immersed in water. Heating elements clean themselves during normal operation.
Do not use decorative surface burner covers. If an element is accidentally turned on, the decorative cover will become hot and possibly melt.
Burns will occur if the hot covers are touched.
Damage may also be done to the cooktop.
Do not allow grease to accumulate around surface burners and drip bowls.
6
IMPORTANT INSTRUCTIONS FOR USING
YOUR OVEN
Protective liners—Do not use aluminum foil, aftermarket oven liners, or any other materials or devices to line oven bottom, oven racks, or any other part of the appliance. Only use aluminum as recommended for baking, such as lining cookware or as a cover placed on food. Any other use of protective liners or aluminum foil may result in a risk of electric shock or fire or a short circuit.
Use care when opening oven door, lower oven door, or warmer drawer (some models). Stand to the side of the appliance when opening the door of a hot oven. Let hot air or steam escape before you remove or replace food in the oven.
Keep oven vent ducts unobstructed. Touching surfaces in this area when the oven is on may cause severe burns. Do not place plastic or heatsensitive items on or near the oven vent. These items can melt or ignite.
Placement of oven racks - Always place oven racks in desired location while oven is cool. If rack must be moved while oven is hot, do not let potholder contact hot burner or element in oven.
Use potholders and grasp the rack with both hands to reposition. Remove all cookware and utensils before moving the rack.
Do not use a broiler pan without its insert. Broiler pans and inserts allow dripping fat to drain away from the high heat of the broiler. Do not cover the broiler insert with aluminum foil; exposed fat and grease could ignite.
Do not cook food on the oven bottom. Always cook in proper cookware and always use the oven racks.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT INSTRUCTIONS FOR CLEANING
YOUR APPLIANCE
CAUTION
Before manually cleaning any part of the appliance, be sure all controls are turned off and the appliance is cool. Cleaning a hot appliance can cause burns.
Clean the appliance regularly to keep all parts free of grease that could catch fire. Do not allow grease to accumulate. Greasy deposits in the fan could catch fire.
Always follow the manufacturer’s recommended directions for use of kitchen cleaners and aerosols. Be aware that excess residue from cleaners and aerosols may ignite causing damage and injury.
Clean ventilating hoods frequently - Grease should not be allowed to accumulate on hood or filter. Follow the manufacturer’s instructions for cleaning vent hoods.
IMPORTANT INSTRUCTIONS FOR SERVICE
AND MAINTENANCE
Do not repair or replace any part of the appliance unless specifically recommended in the manuals.
All other servicing should be done only by a qualified technician. This reduces the risk of personal injury and damage to the appliance.
Always contact your dealer, distributor, service agent, or manufacturer about problems or conditions you do not understand.
Ask your dealer to recommend a qualified technician and an authorized repair service. Know how to disconnect the power to the appliance at the circuit breaker or fuse box in case of an emergency.
Remove the oven door from any unused oven if it is to be stored or discarded.
7
IMPORTANT SAFETY INSTRUCTIONS
Do not touch a hot oven light bulb with a damp cloth. Doing so could cause the bulb to break.
Handle halogen lights (if equipped) with paper towels or soft gloves. Disconnect the appliance or shut off the power to the appliance before removing and replacing the bulb.
Important Safety Notice - The California Safe
Drinking Water and Toxic Enforcement Act requires the governor of California to publish a list of substances known to cause cancer, birth defects, or other reproductive harms, and requires businesses to warn customers of potential exposures to such substances.
8
COOKING RECOMMENDATIONS
Bakeware
The material of bakeware affects how evenly and quickly it transfers heat from the pan to the food.
Material
Shiny metal bakeware
Attributes
Shiny, aluminum, and non-coated bakeware is the best for even heating.
It is suitable for all baked goods.
Recommendation
Recommended cooking temperatures and times are based on shiny metal bakeware.
Dark metal bakeware Dark bakeware cooks hotter than shiny bakeware.
Reduce the cooking temperature by 25° F
(13-14° C) when using dark bakeware.
Glass bakeware
Insulated bakeware
Glass bakeware cooks hotter than shiny bakeware.
Glass is convenient, as the same piece of bakeware can be used for cooking, serving, and storing food.
Reduce the cooking temperature by 25° F
(13-14° C) when using glass bakeware.
Insulated bakeware cooks cooler than shiny bakeware.
Insulated bakeware is designed for baking in gas ovens.
Increase the cooking temperature by 25° F
(13-14° C) when using insulated bakeware.
9
COOKING RECOMMENDATIONS
Cooking Conditions
Conditions in your kitchen can affect the performance of your appliance when cooking food.
Condition
Aging cookware
High altitude
Attributes Recommendation
As pans age and become discolored, cooking times may need to be reduced slightly.
If food is too dark or overcooked, use the minimum cook time in the recipe or packaging.
If food is too light or undercooked, use the middle to maximum cook time in the recipe or packaging.
Air is drier and air pressure is lower.
Foods may take longer to bake.
Doughs may rise faster.
Water boils at a lower temperature, and liquids evaporate faster.
Adjust cooking temperature, cooking time, or recipes as needed.
Increase amount of liquid in baking recipes.
Increase cook time on cooktop. Cover dishes to reduce evaporation.
Increase bake time or oven temperature.
Reduce amount of baking soda or baking powder in recipe.
Reduce rising time or punch down dough and allow it to rise twice.
Cooking Results
Small adjustments may fix a problem with food not being as done as you like or more done than you like.
Result
Food too light
Food too dark
Recommendation
Use the middle to maximum cook time recommended on packaging or recipe.
Use the minimum cook time recommended on packaging or recipe.
Cooking Tips
Use these additional tips to get the best results from your appliance.
Cooking
Rack placement
Preheat
Checking food
Food placement
Broiling pan
Tips
Baking
Follow the instructions in “Setting bake” on starting on page 17 .
When using only one rack, place the rack so the food is in the center of the oven.
Fully preheat the oven before baking items like cookies, cakes, biscuits and breads. Insert food immediately after the beep.
Use the window and oven light when checking food. Opening the door may reduce baking performance.
Allow at least 2 inches (5 cm) of space between bakeware for proper air circulation.
Broiling / Roasting
For best results when broiling, use a broil pan with a broil pan insert designed to drain the fat from the food, help avoid spatter, and reduce smoking. The broiler pan will catch grease spills, and the insert helps prevent grease splatters.
If a broiler pan and insert are not supplied with this appliance, they may be purchased from Frigidaire.com.
10
Check for flatness by rotating a ruler across the bottom of the cookware (see
Cookware should have flat bottoms that make good contact with the entire surface of the heating element (see
BEFORE SETTING SURFACE CONTROLS
Using Proper Cookware
The size and type of cookware used will influence the heat setting needed for best cooking results. Be sure to follow the recommendations for using proper cookware as illustrated in
.
Figure 1: Testing cookware
Cookware Material Types
The cookware material determines how evenly and quickly heat is transferred from the surface element to the pan bottom. The most popular materials available are:
•
Aluminum - Excellent heat conductor. Some types of food will cause it to darken (Anodized aluminum cookware resists staining and pitting).
•
Copper - Excellent heat conductor but discolors easily
(see Aluminum).
•
Stainless - Slow heat conductor with uneven cooking results. Durable, easy to clean, and resists staining.
•
Cast Iron - A slow heat conductor, but will retain heat very well. Cooks evenly once cooking temperature is reached.
•
Porcelain-enamel on metal - Heating characteristics will vary depending on base material.
•
Glass - Slow heat conductor.
IMPORTANT
Do not place empty aluminum, glass, or porcelain-enamel coated cookware on the element. The melting point of cookware made with these materials may be reached quickly, especially if left empty. If the cookware melts it will damage the cooktop. Follow all the cookware manufacturer’s recommendations for use and care of cookware.
• Flat bottom and straight sides.
• Tight fitting lids.
• Weight of handle does not tilt pan. Pan is well balanced
.
• Pan sizes match the amount of food to be prepared and the size of the surface element.
• Made of material that conducts heat well.
• Easy to clean.
• Always match pot diameter to element size.
• Curved and warped pans.
• Cookware larger than element by more than one-half inch or 12mm.
• Heavy handle tilts pan.
• Pan is much smaller
than the element.
Figure 2: Proper cookware
IMPORTANT
NEVER place or straddle a cooking utensil over two different surface cooking areas at the same time.
Incorrect use may damage the cooktop.
11
BEFORE SETTING SURFACE CONTROLS
About the Radiant Surface Elements Element On and Hot Surface Indicator Lights
The element temperature rises gradually and evenly. As the temperature rises, the element will glow red. To maintain the selected setting the element will cycle on and off. The heating element retains enough heat to provide a uniform and consistent heat during the off cycle.
For efficient cooking, turn the element off several minutes before cooking is complete. This will allow residual heat to complete the cooking process.
The ELEMENT ON indicator light will turn on when one or more elements are turned on.
CAUTION
•
Surface elements may appear to have cooled after they have been turned off. The element surface may
still be hot, and burns may occur if the element or surrounding area is touched before it has cooled to a safe temperature.
•
Do not place flammable items such as plastic salt and pepper shakers, spoon holders, or plastic wrapping on top of the range when it is in use. These items could melt or ignite. Potholders, towels, or wooden spoons could catch fire if placed too close to the surface elements.
•
Do not use aluminum foil to line surface drip bowls or reflector pans. Improper installation of these liners may result in risk of electric shock or fire.
Figure 3: On indicator light
A quick glance at this indicator light when cooking is finished is an easy check to be sure all surface elements are turned off.
The HOT SURFACE indicator light will turn on when the burner is hot enough to cause burns and will remain on after the burner is turned off until the surface has cooled to a safe temperature.
NOTE
•
Radiant elements have a limiter that allows the element to cycle on and off, even at the HI setting.
•
Be sure to read detailed instructions for coil cooktop cleaning in the “Care and Cleaning” section and
“Before You Call” checklist section of this Use and
Care Guide.
IMPORTANT
Do not allow aluminum foil, or any material that can melt, to make contact with the cooking element. If these items melt on the cooktop, they will damage the cooktop.
Figure 4: Hot surface indicator light
12
SETTING SURFACE CONTROLS
Radiant surface elements
To operate the radiant element:
1. Place correctly sized cookware on the radiant surface element.
2. Push in and turn the surface control knob in either
) to the desired setting (refer to the
“Suggested radiant surface element settings” table,
3. When cooking is complete, turn the radiant surface element OFF before removing the cookware.
Start most cooking operations on a higher setting and then turn to a lower setting to finish cooking. The surface control knobs do not have to be set exactly on a particular spot.
Use the graphics provided as a guide and adjust the control knob as needed (see
Figure 5 ). A glowing red surface
heating area extending beyond the bottom edge of the cookware indicates the cookware is too small for the surface heating area.
Suggested radiant surface element settings
The suggested settings found in Table 1 below are based
on cooking with medium-weight aluminum pans with lids.
Settings may vary when using other types of pans.
Settings Type of Cooktop
High (HI - 9) Start most foods, bring water to a boil, pan broiling
Medium High (7 - 8) Continue a rapid boil, fry, deep fat fry
Medium (5 - 6) Maintain a slow boil, thicken sauces and gravies or steam vegetables
Medium Low (2 - 4) Keep foods cooking, poach, stew
Low (1) Low temperature cooking
Low (LO) Keep warm, melt
Table 1: Suggested settings for radiant elements
IMPORTANT
Do not allow aluminum foil or ANY material that can melt to make contact with the radiant surface element. If these items melt on the cooktop, they will damage the cooktop.
Figure 5: Surface control knob
CAUTION
•
Radiant surface elements may appear to have cooled after they have been turned off. The element may
still be hot and burns may occur if the element is touched before it has cooled sufficiently.
•
Do not place flammable items such as plastic salt and pepper shakers, spoon holders, or plastic wrappings on top of the range when it is in use. These items could melt or ignite. Potholders, towels, or wooden spoons could catch fire if placed too close to the surface elements.
•
Do not use aluminum foil to line surface drip bowls or reflector pans. Improper installation of these liners may result in risk of electric shock or fire.
NOTE
•
The size and type of utensil used and the amount and type of food being cooked will influence the setting needed for best cooking results.
•
The Element ON indicator lights will glow when one or more elements are turned ON. A quick glance at these indicator lights when finished cooking is an easy check to be sure all control knobs are turned
OFF. The Hot Surface indicator light will remain on
AFTER the control knob is turned to the “OFF” position and will stay on until the heating surface area has cooled sufficiently.
13
SETTING SURFACE CONTROLS
Home Canning
Be sure to read and observe all the following points when home canning with your appliance. Check with the USDA
(United States Department of Agriculture) Web site and be sure to read all the information they have available as well as follow their recommendations for home canning procedures.
•
Use only a completely flat bottom canner with no ridges that radiate from the bottom center when home canning. Heat is spread more evenly when the bottom surface is flat. Use a straight-edge to check canner bottom.
•
Make sure the diameter of the canner does not exceed
1 inch beyond the surface element markings or burner.
•
It is recommended to use smaller diameter canners on electric coil and ceramic glass cooktops and to center canners on the burner grates.
•
Start with hot tap water to bring water to boil more quickly.
•
Use the highest heat seating when first bringing the water to a boil. Once boiling is achieved, reduce heat to lowest possible setting to maintain that boil.
•
Use tested recipes and follow instructions carefully.
Check with your local Cooperative Agricultural
Extension Service or a manufacturer of glass jars for the latest canning information.
•
It is best to can small amounts and light loads.
•
Do not leave water bath or pressure canners on high heat for an extended amount of time.
14
Oven Vent Location
The oven is vented as shown below. When the oven is on, warm air is released through the vent. This venting is necessary for proper air circulation in the oven and good baking results. Do not block oven vent. Never close off the openings with aluminium foil or any other material. Steam or moisture may appear near the oven vent. This is normal.
BEFORE SETTING OVEN CONTROLS
Types of oven racks
flat oven rack
Figure 6: Oven vent
WARNING
Protective Liners — Do not use aluminum foil or any other material or liners to line the oven bottom, walls, racks or any other part of the range. Doing so will alter the heat distribution, produce poor baking results, and possibly cause permanent damage to the oven interior.
Improper installation of these liners may result in risk of electric shock or fire.
CAUTION
•
Always use pot holders or oven mitts when using the oven. When cooking, the oven interior, oven exterior, oven racks, and cooktop will become very hot which can cause burns.
•
To prevent possible damage to the oven, do not attempt to close the oven door until all the oven racks are fully positioned back inside the oven cavity.
offset oven rack
Figure 7: Oven rack types
•
Flat oven racks may be used for most cooking needs and may be placed in most oven rack positions.
•
The offset oven rack (some models) provides additional step down positions from the standard flat rack design. The offset design positions the base of the rack about ½ of a rack position lower than the flat rack and may be used in most oven rack positions. To maximize oven cooking space, place the bottom oven rack in the lowest rack position for baking or roasting large cuts of meat.
Removing, replacing, and arranging flat or offset oven racks
Always arrange the oven racks when the oven is cool.
To remove - Pull the oven rack straight forward until it reaches the stop position. Lift up front of oven rack slightly and slide out.
To replace - Place the oven rack on the rack guides on both sides of oven walls. Tilt the front of oven rack upward slightly and slide the oven rack back into place. Be sure oven racks are level before using.
15
SETTING OVEN CONTROLS
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN
For satisfactory use of your oven, become familiar with the various features and functions in this section
NOTE
Not all models are equipped with a time of day clock or minute timer.
If your model is not equipped with a clock display, the time of day and the minute timer features shown on this page will not be available.
To set time of day (some models):
When the range is first plugged in, or when the power supply to the range has been interrupted, "12:00" will flash in the display window indicating that the time of day needs to be set.
1. Press clock key.
2. Press in and hold or key until the correct time appears in the display. The UP arrow key will increase time and DOWN arrow key will decrease time.
Operating oven light (some models)
The interior oven light will automatically turn ON when the oven door is opened. Press the oven light switch located on the upper left control panel to turn the interior oven light ON and OFF whenever the oven door is closed.
To set minute timer (some models)
Press timer on-off key pad. "0:00" will appear in the display window. The minute timer may be set for any amount of time from 1 minute to 12 hours.
Press in and hold key pad until the desired time for the minute timer appears in the display.
The key pad increases time and key pad decreases time.
The minute timer will automatically start when one of these key pads are released.
Once set, the display will flash “:” indicating the minute timer is active.
When the minute timer reaches the end of the set time, the control will display "0:00" and beep three times.
The minute timer will continue to beep until either the clock or timer on-off key pad is pressed at which time the display will return to the time of day.
To cancel the minute timer before the minute timer is finished:
Press timer on-off once.
oven light switch
NOTE
The minute timer will not start or stop the cooking process. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or while using the oven or cooktop features.
Press timer on-off at any time to cancel the minute timer and return to the time of day display.
16
Setting bake
Bake cooks with heat that rises from the oven bottom. The heat and air circulate naturally in the oven. Follow baking recommendations for best results.
The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 288°C).
Baking Tips
•
Fully preheat the oven before baking items like cookies, cakes, biscuits, and breads.
•
When using any single rack, use rack position 3.
•
For best results when baking cakes using two oven racks, place racks in positions 2 and 4.(
•
When baking using two oven racks, position cookware to allow at least 2 inches (5 cm) of space between cookware for proper air circulation.
SETTING OVEN CONTROLS
To set Bake:
1. Turn the oven temp. control knob to the desired oven temperature (
2. Preheat the oven for 10 to 12 minutes before baking.
Preheating is not necessary when roasting, cooking casseroles or broiling most foods.
3. When finished cooking, turn the oven temp. control knob to OFF position.
Figure 8: Pan spacing suggestions
Figure 9: Oven temperature control
5
2
1
4
3
Figure 10: Rack positions
17
SETTING OVEN CONTROLS
Setting broil
Use the broil feature to cook meats that require direct exposure to radiant heat for optimum browning results.
When broiling always remember to arrange the oven racks while oven is still cool.
NOTE: Broiling is direct heat cooking and will produce some smoke. If smoke is excessive, place food further away from the element. Watch food to prevent burning.
For medium done steaks, position the oven rack closer to the broil element. For well-done foods such as chicken, fish, lobster or thick cuts of meat, position the oven rack further from the broil element.
.
Figure 11: Be sure to set oven control to broil.
WARNING
Should an oven fire occur, close the oven door and turn the oven OFF. If the fire continues, use a fire extinguisher.
Do not put water or flour on the fire. Flour may be explosive.
5
4
3
2
1
Figure 12: Broil rack positions and broil pan insert
CAUTION
•
Always use oven mitts. Oven racks will become very hot which can cause burns.
•
When broiling, always pull the oven rack out to the stop position before turning or removing food.
To set broil:
1. Turn the oven control knob to broil. Most foods can be broiled at the broil setting. Preheat the oven if desired.
2. Place the insert on the broiler pan (if equipped), then place the food on the insert. Do not use the broiler pan without the insert or cover the insert with aluminum foil
(Fig. 4). The exposed fat could ignite.
3. Place the broiler pan on the oven rack. Leave the oven door open at the broil stop position when broiling
4. Broil on one side until food is browned; turn and broil on the second side. Season and serve.
5. When broiling is finished, turn the oven temp control knob to OFF
Figure 13: Open door to stop position when broiling
CAUTION
The broiler pan and the insert (some models) allows grease to drain and be kept away from the high heat of the broiler. Do not use the pan without the insert. Do not cover the insert with aluminum foil; the exposed grease could ignite.The broil pan and insert are available online at frigidaire.com
18
CARE AND CLEANING
Remove spills and any heavy soiling as soon as possible.
Regular cleaning will reduce the difficulty of major cleaning later.
CAUTION
•
Before cleaning any part of the appliance, be sure all controls are turned off and the appliance is cool.
•
If ammonia or appliance cleaners are used, they must be removed and the appliance must be thoroughly rinsed before operating. Follow manufacturer's instructions and provide adequate ventilation.
Figure 14: Use cleaners with caution
Surface or Area
Aluminum and vinyl
Cleaning Recommendation
Using a soft cloth, clean with mild dish detergent and water. Rinse with clean water, dry and polish with a soft, clean cloth.
Painted and plastic control knobs
Painted body parts
Painted decorative trims
Control panel
Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar and water. Rinse with clean water, dry and polish with a soft, clean cloth.
Glass cleaners may be used, but do not apply directly to surface; spray onto cloth and wipe.
Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar and water. Do not spray liquids directly on the oven control and display area.
Do not use large amounts of water on the control panel - excess water on the control area may cause damage to the appliance. Do not use other liquid cleaners, abrasive cleaners, scouring pads, or paper towels - they will damage the finish.
Control knobs
Stainless Steel
Smudge Proof™ Stainless Steel
Black Stainless Steel
Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar and water. To remove control knobs: turn to the OFF position, grasp firmly, and pull off the shaft. To replace knobs after cleaning, line up the OFF markings and push the knobs into place.
Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar and water. Rinse with clean water, dry with a soft clean cloth. Do not use cleaners containing abrasives, chlorides, chlorine, or ammonia.
Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar and water. Rinse with clean water, dry with a soft clean cloth. Do not use appliance cleaner, stainless steel cleaner, or cleaner containing abrasives, chlorides, chlorine, or ammonia. These cleaners may damage the finish.
19
CARE AND CLEANING
Porcelain-enameled broiler pan and insert
Porcelain door liner
Porcelain body parts
Manual clean oven interior
Oven door
Coil surface elements and drip bowls
Rinse with clean water and a damp cloth. Scrub gently with a soapy, non-abrasive scouring pad to remove most spots. Rinse with a 50/50 solution of clean water and ammonia. If necessary, cover difficult spots with an ammonia-soaked paper towel for
30 to 40 minutes. Rinse and wipe dry with a clean cloth. Remove all cleaners or future heating could damage the porcelain. Do not allow food spills with a high sugar or acid content (milk, tomatoes, sauerkraut, fruit juices or pie filling) to remain on porcelain surfaces. These spills may cause a dull spot even after cleaning.
The oven interior is porcelain coated and safe to clean using oven cleaners. Always follow manufacturer's instructions for cleaners. After cleaning, remove any oven cleaner or the porcelain may become damaged during future heating. Do not spray oven cleaner on any electrical controls or switches. Do not spray or allow oven cleaner to build up on the oven temperature sensing probe. Do not spray cleaner on oven door trim, door gasket, plastic drawer glides, handles or any exterior surfaces of the appliance.
Use mild dish detergent and water or a 50/50 solution of vinegar and water to clean the top, sides, and front of the oven door. Rinse well. Glass cleaner may be used on the outside glass of the door. Ceramic smoothtop cleaner or polish may be used on the interior door glass. Do not immerse the door in water. Do not spray or allow water or cleaners to enter the door vents. Do not use oven cleaners, cleaning powders, or any harsh abrasive cleaning materials on the outside of the oven door.
Do not clean the oven door gasket. The oven door gasket is made of a woven material which is essential for a good seal. Do not rub, damage, or remove this gasket.
See
“Surface elements and drip bowls” on page 21 .
20
CARE AND CLEANING
Surface elements and drip bowls
CAUTION
•
Make sure drip bowls are in place - Absence of these bowls during cooking may subject wiring or components underneath to damage.
•
Never immerse a surface element in water.
•
Be sure the range is cool before removing surface elements or drip bowls. Be careful not to bend terminal ends when replacing surface elements after cleaning.
•
Protective liners—Do not use aluminum foil to line surface drip bowls or reflector pans. Improper installation of these liners may result in risk of electric shock or fire.
.
Hold down clip
(if equipped)
Element support
Allow element support to rest on drip pan inside rim.
Surface elements may be unplugged and removed to make cleaning the drip pans easier. The surface elements clean themselves when they are turned on. Food spilled on a hot element will burn off. Food spilled on a cool element may be cleaned with a damp cloth—any remaining soil will burn off the next time the element is used.
To remove the surface elements and drip bowls:
1. Lift the edge of the drip bowl across from the terminal end. Lift the surface element and drip bowl together just enough to clear the cooktop.
2. While holding the drip bowl and surface element, gently pull the terminal end out from terminal plug. Do not remove the hold-down clip (if equipped) from the drip bowl.
Figure 15: Removing coil and drip bowl
Cleaning drip bowls
Wash in hot, soapy water. Rinse and dry while still warm.
Hard to remove, burned-on soil can be removed by soaking the drip bowls for about 20 minutes in a lightly diluted liquid cleanser or a solution of ammonia and water (1/2 cup ammonia to 1 gallon of water). A nylon scrubber may be used after soaking. Do not use abrasive cleaners or steel wool, they will scratch the surface. Always rinse with clean water and polish dry with a soft cloth.
To replace drip bowls and surface elements:
1. Slide the terminal end on the element through the opening in the drip bowl.
2. Align the element support to rest on the rim inside the drip bowl. If your drip bowl is equipped with a hold-down clip, align the element support opposite the terminal end with the slot in the hold-down clip, and snap into place.
3. After the element is positioned in the drip bowl, line up the terminal end with the terminal plug as shown.
4. Hold the surface element and drip bowl together as level as possible and firmly push the terminal end into the terminal plug. Make sure element terminal is seated properly into terminal plug. Make sure the surface element is level to reduce the hazard of cookware sliding off the element.
21
CARE AND CLEANING
Aluminum Foil and Utensils
WARNING
•
Never cover any slots, holes, or passages in the oven bottom or cover an entire oven rack with materials such as aluminum foil. Aluminum foil linings may trap heat, causing a fire hazard.
•
Protective Liners — Do not use aluminum foil to line the oven bottom. Improper installation of these liners may result in risk of electric shock or fire.
Cleaning under cooktop (some models)
CAUTION
When lowering the lift-up range cooktop, grasp the sides with fingertips only. Be careful not to pinch fingers. Do not drop or bend the range cooktop when raising or lowering.
This could damage the cooktop surface.
cooktop
IMPORTANT
•
Aluminum foil - Use of aluminum foil on a hot cooktop can damage the cooktop. Do not use thin aluminum cooking utensils or allow aluminum foil to touch the surface elements under any circumstances.
•
Aluminum utensils - The melting point of aluminum is much lower than that of other metals. Care must be taken when aluminum pots or pans are used on the cooktop. If aluminum pans are allowed to boil dry when using the cooktop, not only will the utensil be damaged or destroyed, but it may fuse to or permanently damage the coil or cooktop.
Cleaning under bake element (some models)
The bake element is located in the lower oven cavity. For some models, if the lower bake element is visible it may be tilted up for easier access to the oven bottom for cleaning.
Remove the oven racks before raising the element. Be careful not to raise the element more than 4 or 5 inches from the resting position.
support rods
Figure 17: Lifting cooktop
To raise the cooktop for cleaning (some models)
1. Grasp the sides and lift from the front (See Figure 17 ).
Lift-up rods will support the top in a raised position. Only lift the cook top far enough to allow the support rods to snap into place.
2. Clean underneath using a clean cloth and hot, soapy water.
To lower, hold the cooktop up and gently push back on each rod to release the notched support. Hold the cooktop while slowly sliding the lift rods down into the range frame.
Figure 16: Lift bake element
22
CARE AND CLEANING
Removing and Replacing the Oven Door:
CAUTION
The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.
Oven door hinge locations
To remove the oven door
1. Open oven door completely, horizontal with floor (See
2. Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See
). A tool such as a small flat-blade screwdriver may be required.
3. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See
4. Close the door to approximately 10 degrees from the door frame (See
).
5. Lift the oven door hinge arms over the roller pins located on each side of the oven frame (See
).
To replace the oven door:
1. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See
2. Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See
). The hook of the hinge arms must be fully seated onto the roller pins.
3. Fully open the oven door, horizontal with floor (See
4. Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges to the
locked position (See Figure 19 ).
5. Close the oven door.
IMPORTANT
Special door care instructions - Most oven doors contain glass that can break. Do not hit the glass with pots, pans, or any other object. Scratching, hitting, jarring, or stressing the glass may weaken its structure, causing an increased risk of breakage at a later time. Do not close the oven door until all of the oven racks are fully in place.
Figure 18: Door hinge location
LOCK
Figure 19: Door hinge locks
oven door roller pin hinge arm about
10° hinge
Figure 20: Holding door for removal
Figure 21: Replacement and location of hinge arm and roller pin
23
CARE AND CLEANING
Replacing the Oven Light
CAUTION
Be sure the oven is unplugged and all parts are cool before replacing the oven light.
Replacing the oven interior light bulb:
The interior oven light is located at the rear of the oven
Turn electrical power off at the main source or unplug the appliance.
Replace the bulb with a new appliance bulb.
Turn the power back on again at the main source (or plug the appliance back in).
Be sure to reset the time of day on the clock.
To remove and replace storage drawer (some models)
Use the storage drawer for storing cooking utensils. The drawer can be removed to facilitate cleaning under the range. Use care when handling the drawer.
To remove the drawer:
1. Pull empty drawer out until it stops.
2. Tilt up the front of the drawer up and pull it out over the glide stop.
To replace the drawer:
1. Insert the back of the drawer into the opening.
2. Lift up the drawer and line up the drawer supports with the rails. Make sure to clear the glide stop.
3. Push in the drawer until it stops.
oven light glide rail
Figure 22: Oven light
glide stop drawer support
Figure 23: Parts of storage drawer
24
BEFORE YOU CALL
Oven Baking
For best cooking results, preheat the oven before baking cookies, breads, cakes, pies, pastries, etc. There is no need to preheat the oven for roasting meat or baking casseroles. The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appliance.
Baking Problems
Baking Problems and Solutions
Causes
•
•
•
Allow oven to preheat to the selected temperature before placing food in the oven.
Use proper rack position for baking needs.
Set oven temperature 25°F (13°C) lower than recommended.
Corrections
Cookies and biscuits burn on the bottom.
•
Cookies and biscuits put into
•
Allow oven to preheat to desired temperature before oven before oven is preheated.
placing food in oven.
•
Oven rack is overcrowded.
•
Choose pan sizes that will permit at least 2” of air space
(5.1 cm) on all sides when placed in the oven.
•
Dark pan absorbs heat too fast.
•
Use a medium weight shiny baking sheet.
Cakes too dark on top or bottom
•
Cakes put in oven before oven is preheated.
•
Rack position too high or too low.
•
Oven too hot.
Cakes not done in center
Cakes not level.
Foods not done when cooking time is over.
•
Oven too hot.
•
Incorrect pan size.
•
Pan not centered in oven.
•
Glass cookware slow heat conductor.
•
Set oven temperature 25°F (13°C) lower than recommended.
•
Use pan size suggested in recipe.
•
Use proper rack position and place pan so there are at least 2” (5.1 cm) of space on all sides of pan.
•
Reduce temperature and increase cook time or use shiny bakeware.
•
Oven not level.
•
Pan too close to oven wall or rack overcrowded.
•
Place a marked glass measuring cup filled with water on the center of the oven rack. If the water level is uneven, refer to the installation instructions for leveling the oven.
•
Pan warped.
•
Use proper rack position and place pan so there are at least 2” (5.1 cm) of space on all sides of pan.
•
Oven light left on while baking.
•
Do not use pans that are dented or warped.
•
Do not leave the oven light on while baking.
•
Oven too cool.
•
Oven overcrowded.
•
Oven door opened too frequently.
•
Set oven temperature 25°F (13°C) higher than suggested and bake for the recommended time.
•
Be sure to remove all pans from the oven except the ones to be used for baking.
•
Open oven door only after the shortest recommended baking time.
25
BEFORE YOU CALL
Solutions to Common Problems:
Before you call for service, review the following list. It may save you time and expense. Possible solutions are provided with the problem listed.
Problem
Entire appliance does not operate.
Poor baking results.
Flames inside oven or smoking from oven vent.
Oven smokes excessively when broiling.
Oven portion of appliance does not operate.
Cause / Solution
Appliance not connected. Make sure power cord is plugged properly into outlet.
Check your fuse box or breaker box to make sure the circuit is active.
Electrical power outage. Check house lights to be sure. Call your local electric company for service outage information.
Oven Problems
Many factors affect baking results. Use proper oven rack position. Center food in the oven and space pans to allow air to circulate. Preheat the oven to the set temperature before placing food in the oven. Try adjusting the recipe's recommended temperature or baking time.
Excessive spills in oven. Grease or food spilled onto the oven bottom or oven cavity.
Wipe up excessive spills before starting the oven. If flames or excessive smoke are present when using broil, see
.
Incorrect setting. Follow the “Setting broil” instructions on page 18
.
Meat too close to the broil element or burner. Reposition the broil pan to provide proper clearance between the meat and broil element or burner. Remove excess fat from meat. Cut remaining fatty edges to prevent curling, but do not cut into lean.
Grease build up on oven surfaces. Regular cleaning is necessary when broiling frequently. Grease or food splatters will cause excessive smoking.
Be sure the regulator gas valve is turned to ON. See installation instructions.
Be sure the oven controls are set properly for the desired function or see “Entire appliance does not operate.” in this checklist.
26
BEFORE YOU CALL
Problem Cause / Solution
Electric Cooktop Problems
Incorrect surface control setting. Adjust power level setting.
Surface element is too hot or not hot enough.
Surface element does not heat or does not heat evenly.
Be sure the correct surface control knob is turned on for the element needed.
Cookware is light weight or warped. Use only flat, evenly balanced, medium or heavyweight cookware. Flat pans heat better than warped pans. Cookware materials and weight of the material affect heating. Heavy and medium-weight pans heat evenly.
Because lightweight pans heat unevenly, foods may burn easily.
Drip bowls have changing or distorting colors.
Coil Cooktop Problems
Drip bowls are pitting or rusting.
Foods with acids, such as tomatoes, will cause corrosion if allowed to stand in/on bowls. When cool, remove and wash drip bowls as soon as possible after a spill.
Normal environment - Houses located along sea coasts are exposed to salt air.
Protect bowls as much as possible from direct exposure to salt air.
Bottom of cookware extends beyond surface element and touches cooktop surface.
This can cause high enough temperatures to discolor drip bowls. DO NOT use cookware of this type. Pan sizes should match the size of the element. Replacement drip bowls may be purchased from your appliance dealer.
Other Problems
Appliance is not level.
Be sure the floor is level, strong, and stable enough to adequately support the range.
If the floor is sagging or sloping, contact a carpenter to correct the situation.
Poor installation. Place the oven rack in the center of the oven. Place a level on the oven rack. Adjust the leveling legs at the base of the appliance until the rack is level.
Kitchen cabinet alignment may make range appear not level. Be sure cabinets are square and have sufficient room for appliance clearance.
Cannot move appliance easily.
Appliance must be accessible for service.
Cabinets not square or are built in too tightly. Contact the builder or installer to make the appliance accessible.
Carpet interferes with appliance. Provide sufficient space so the appliance can be lifted over carpet. Installation over carpet is not advised. See the installation instructions for guidelines specific to your appliance.
Oven light does not work.
Be sure the oven light is secure in the socket. See “Replacing the Oven Light” on page 24 .
27
WARRANTY
Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.
Exclusions
If You Need
Service
This warranty does not cover the following:
1.
Products with original serial numbers that have been removed, altered or cannot be readily determined.
2.
Product that has been transferred from its original owner to another party or removed outside the USA or
Canada.
3.
Rust on the interior or exterior of the unit.
4.
Products purchased “as-is” are not covered by this warranty.
5.
Food loss due to any refrigerator or freezer failures.
6.
Products used in a commercial setting.
7.
Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances not in ordinary household use or used other than in accordance with the provided instructions.
8.
Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
9.
Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which are not a part of the appliance when it is shipped from the factory.
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or knobs, handles, or other cosmetic parts.
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service calls to remote areas, including the state of Alaska.
12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors, cabinets, walls, etc.
13. Damages caused by: services performed by unauthorized service companies; use of parts other than genuine Electrolux parts or parts obtained from persons other than authorized service companies; or external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR
OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT
BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL
EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED
WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.
Service under this warranty must be obtained by contacting Electrolux at the addresses or phone numbers below.
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances
North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp.
Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under this warranty must be performed by Electrolux or an authorized service company. Product features or specifications as described or illustrated are subject to change without notice.
USA
1.800.944.9044
Electrolux Home Products, Inc.
10200 David Taylor Drive
Charlotte, NC 28262
Canada
1.800.265.8352
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
L5V 3E4
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project