ELECTRIC RANGE

USER INSTRUCTIONS

THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING, please visit our website at www.maytag.com for additional information. If you still need assistance, call us at 1-800-688-9900.

You will need your model and serial number, located on the oven frame behind the top right side of the oven door.

Para obtener acceso a “Instrucciones para el usuario de la estufa eléctrica” en español, o para obtener información adicional acerca de su producto, visite: www.maytag.com

Deberá tener a mano el número de modelo y de serie, que están ubicados en el marco del horno, detrás del lado derecho superior de la puerta del horno.

Table of Contents

RANGE SAFETY ...................................................................................... 2

The Anti-Tip Bracket ............................................................................ 2

FEATURE GUIDE .................................................................................... 4

COOKTOP USE ....................................................................................... 5

Cookware ............................................................................................. 7

Home Canning ..................................................................................... 8

OVEN USE ............................................................................................... 8

Electronic Oven Controls ..................................................................... 8

Sabbath Mode...................................................................................... 9

Aluminum Foil....................................................................................... 9

Positioning Racks and Bakeware ...................................................... 10

Oven Vent ........................................................................................... 10

Baking and Roasting .......................................................................... 10

Broiling................................................................................................ 11

Convection Baking and Roasting ...................................................... 11

Timed Cooking ................................................................................... 11

RANGE CARE........................................................................................ 12

Clean Cycle ........................................................................................ 12

General Cleaning ................................................................................ 13

Oven Light .......................................................................................... 14

TROUBLESHOOTING ........................................................................... 14

ACCESSORIES...................................................................................... 16

WARRANTY ........................................................................................... 17

W10667165A

2

RANGE SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

DANGER

You can be killed or seriously injured if you don't immediately follow instructions.

WARNING

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

The Anti-Tip Bracket

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without having the anti-tip bracket fastened down properly.

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Verify the anti-tip bracket has been properly installed and engaged per installation instructions.

Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

Anti-Tip

Bracket

To verify the anti-tip bracket is installed and engaged:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor or wall.

• Slide range back so rear range foot is under anti-tip bracket.

• See installation instructions for details.

Range Foot

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

To reduce the risk of fire, electrical shock, injury to persons, or damage when using the range, follow basic precautions, including the following:

■

Protective Liners – Do not use aluminum foil to line surface unit drip bowls or oven bottoms, except as suggested in the manual. Improper installation of these liners may result in a risk of electric shock, or fire.

■

WARNING:

TO REDUCE THE RISK OF TIPPING OF

THE RANGE, THE RANGE MUST BE SECURED BY

PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK

IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE

RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET

SECURELY ATTACHED TO FLOOR OR WALL, AND

SLIDE RANGE BACK SO REAR RANGE FOOT IS

UNDER ANTI-TIP BRACKET.

■

CAUTION:

Do not store items of interest to children in cabinets above a range or on the backguard of a range – children climbing on the range to reach items could be seriously injured.

■

Glazed Cooking Utensils – Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for range-top service without breaking due to the sudden change in temperature.

■

Utensil Handles Should Be Turned Inward and Not Extend

Over Adjacent Surface Units – To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of a utensil should be positioned so that it is turned inward, and does not extend over adjacent surface units.

■

Proper Installation – Be sure the range is properly installed and grounded by a qualified technician.

■

Do Not Soak Removable Heating Elements – Heating elements should never be immersed in water.

■

Never Use the Range for Warming or Heating the Room.

■

Do Not Leave Children Alone – Children should not be left alone or unattended in area where the range is in use.

They should never be allowed to sit or stand on any part of the range.

■

Wear Proper Apparel – Loose-fitting or hanging garments should never be worn while using the range.

■

Do Not Cook on Broken Cooktop – If cooktop should break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a qualified technician immediately.

■

Clean Cooktop With Caution – If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid steam burn. Some cleaners can produce noxious fumes if applied to a hot surface.

■

User Servicing – Do not repair or replace any part of the range unless specifically recommended in the manual. All other servicing should be referred to a qualified technician.

■

Use Care When Opening Door – Let hot air or steam escape before removing or replacing food.

■

Do Not Heat Unopened Food Containers – Build-up of pressure may cause container to burst and result in injury.

■

Storage in or on the Range – Flammable materials should not be stored in an oven or near surface units.

■

Keep Oven Vent Ducts Unobstructed.

■

Do Not Use Water on Grease Fires – Smother fire or flame or use dry chemical or foam-type extinguisher.

■

Use Only Dry Potholders – Moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholder touch hot heating elements. Do not use a towel or other bulky cloth.

■

DO NOT TOUCH SURFACE UNITS OR AREAS NEAR

UNITS – Surface units may be hot even though they are dark in color. Areas near surface units may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials contact surface units or areas near units until they have had sufficient time to cool. Among those areas are the cooktop and surfaces facing the cooktop.

■

Use Proper Pan Size – The range is equipped with one or more surface units of different size. Select utensils having flat bottoms large enough to cover the surface unit heating element. The use of undersized utensils will expose a portion of the heating element to direct contact and may result in ignition of clothing. Proper relationship of utensil to burner will also improve efficiency.

■

Never Leave Surface Units Unattended at High Heat

Settings – Boilover causes smoking and greasy spillovers that may ignite.

■

Make Sure Reflector Pans or Drip Bowls Are in Place –

Absence of these pans or bowls during cooking may subject wiring or components underneath to damage.

■

Placement of Oven Racks – Always place oven racks in desired location while oven is cool. If rack must be moved while oven is hot, do not let potholder contact hot heating element in oven.

■

DO NOT TOUCH HEATING ELEMENTS OR INTERIOR

SURFACES OF OVEN – Heating elements may be hot even though they are dark in color. Interior surfaces of an oven become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials contact heating elements or interior surfaces of oven until they have had sufficient time to cool. Other surfaces of the appliance may become hot enough to cause burns – among these surfaces are oven vent openings and surfaces near these openings, oven doors, and windows of oven doors.

For self-cleaning ranges –

■

Do Not Clean Door Gasket – The door gasket is essential for a good seal. Care should be taken not to rub, damage, or move the gasket.

■

Do Not Use Oven Cleaners – No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven.

■

Clean Only Parts Listed in Manual.

■

Before Self-Cleaning the Oven – Remove broiler pan and other utensils.

For units with ventilating hood –

■

Clean Ventilating Hoods Frequently – Grease should not be allowed to accumulate on hood or filter.

■

When flambeing foods under the hood, turn the fan on.

SAVE THESE INSTRUCTIONS

3

FEATURE GUIDE

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Frequently Asked

Questions (FAQs) section of our website at www.maytag.com for more detailed instructions.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

4

KEYPAD

CLOCK

LIGHT

KITCHEN

TIMER

(on/off)

START

CANCEL

TEMP/TIME

BAKE

BROIL

CONVECT

BAKE

FEATURE

Clock

INSTRUCTIONS

The Clock uses a 12-hour cycle.

1. Check that the oven is off.

2. Press CLOCK.

3. Press TEMP/TIME “+” or “-” keypads to set the time of day.

4. Press SET CLOCK or START.

Oven cavity light

The oven light is controlled by a keypad on the oven control panel. While the oven door is closed, press the oven light switch to turn the light on and off. The oven light will come on when the oven door is opened.

Oven timer

The Kitchen Timer can be set in hours or minutes up to 12 hours and 59 minutes.

1. Press KITCHEN TIMER.

2. Press TEMP/TIME “+” or “-” keypads to set the length of time.

3. Press START to begin the countdown. If enabled, end-of-cycle tones will sound at end of countdown.

4. Press KITCHEN TIMER twice to cancel the Timer. Do not press the Cancel keypad because the oven will turn off.

5. If the Kitchen Timer is running, but not in the display, press KITCHEN TIMER to display the countdown for 5 seconds.

Cooking start

The Start pad begins any oven function. If Start is not pressed within 2 minutes, “PUSH” appears in the display. If Start is not pressed within 1 minute after pressing a keypad, the function is canceled and the time of day is displayed.

Range function

Temperature and time adjust

Baking and roasting

The Cancel keypad stops any function except the Clock, Kitchen Timer and Oven Control Lockout.

The “+” or “-” keypads are used to adjust time and temperature settings.

Broiling

Convection baking and roasting

1. Press BAKE.

2. Press TEMP/TIME “+” or “-” keypads to set a temperature other than 350°F (175°C) in 5° increments between 170°F and 500°F (75°C and 260°C).

3. Press START.

4. To change the temperature, repeat Step 2. Press START for the change to take effect.

5. Press CANCEL when finished.

1. Press BROIL.

2. Press TEMP/TIME “+” or “-” keypads to change the temperature in 5° increments between

300°F and 500°F (150°C and 260°C).

3. Press START, and allow oven to preheat for 5 minutes.

4. Position cookware in the oven and close the oven door to the broil stop position so that the door is open approximately 6" (15 cm).

5. Press CANCEL when finished.

1. Press CONVECT BAKE.

2. Press TEMP/TIME “+” or “-” keypads to set a temperature other than 350°F (175°C) in 5° increments between 170°F and 500°F (75°C and 260°C).

3. Press START.

4. To change the temperature, repeat Step 2. Press START for the change to take effect.

5. Press CANCEL when finished.

KEYPAD

KEEP WARM Hold warm

DELAY START Delayed start

COOK TIME Timed cooking

AQUALIFT

SELF CLEAN

START

(hold 3 sec to lock)

FEATURE

Clean cycle

Oven control lockout

INSTRUCTIONS

Food must be at serving temperature before placing it in the warmed oven.

1. Press KEEP WARM.

2. Temperature is set at 170°F (75°C) for 60 minutes (1 hour).

3. Press START.

4. Press CANCEL when finished.

NOTE: The oven will automatically turn off after 60 minutes.

The Delay Start keypad is used to enter the starting time for an oven function with a delayed start.

Delay start should not be used for foods such as breads and cakes because they may not bake properly.

To set a Timed Cook or a Delayed Timed Cook, see “Timed Cooking” section.

Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length of time, and/or shut off automatically.

To set a Timed Cook or a Delayed Timed Cook, see “Timed Cooking” section.

See the “Clean Cycle” section.

1. Check that the oven is off.

2. Press and hold the START (hold 3 sec to lock) keypad for 3 seconds.

3. A tone will sound, and “Loc” will be displayed.

4. Repeat to unlock. Only the Clock, Kitchen Timer and Oven Light keypads will function with the controls locked. The cooktop functions are not affected by the oven control lockout.

WARNING

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

COOKTOP USE

Clean the cooktop after each use to help avoid scratches, pitting, abrasions and to condition the glass surface. Ceramic glass cooktop cleaner and a cooktop scraper are also recommended for stubborn soils. Do not use abrasive cleaners, cleaning pads or harsh chemicals for cleaning. The Cooktop Care Kit Part Number

31605 contains all of the items needed to clean and condition your ceramic glass cooktop. Refer to the “Range Care” section for additional information.

IMPORTANT: To avoid permanent damage to the cooktop surface and to make soils easier to remove, clean the cooktop after each use to remove all soils.

■

Avoid storing jars or cans above the cooktop. Dropping a heavy or hard object onto the cooktop could crack the cooktop.

The control knobs can be set to anywhere between HIGH and

LOW. Push in and turn to setting.

REMEMBER: When range is in use or (on some models) during the Self-Cleaning cycle, the entire cooktop area may become hot.

Ceramic Glass

The surface cooking area will glow red when an element is on.

Some parts of the surface cooking area may not glow red when an element is on. This is normal operation. It may cycle on and off to maintain the selected heat level.

It is normal for the surface of light colored ceramic glass to appear to change color when surface cooking areas are hot. As the glass cools, it will return to its original color.

■

■

■

■

■

■

To avoid damage to the cooktop, do not leave a hot lid on the cooktop. As the cooktop cools, air can become trapped between the lid and the cooktop, and the ceramic glass could break when the lid is removed.

For foods containing sugar in any form, clean up all spills and soils as soon as possible. Allow the cooktop to cool down slightly. Then, while wearing oven mitts, remove the spills using a scraper while the surface is still warm. If sugary spills are allowed to cool down, they can adhere to the cooktop and can cause pitting and permanent marks.

To avoid scratches, do not slide cookware or bakeware across the cooktop. Aluminum or copper bottoms and rough finishes on cookware or bakeware could leave scratches or permanent marks on the cooktop.

Do not cook popcorn in prepackaged aluminum containers on the cooktop. They could leave aluminum marks that cannot be removed completely.

To avoid damage to the cooktop, do not allow objects that could melt, such as plastic or aluminum foil, to touch any part of the entire cooktop.

To avoid damage to the cooktop, do not use the cooktop as a cutting board.

5

■

Use cookware about the same size as the surface cooking area. Cookware should not extend more than ½" (1.3 cm) outside the area.

B

Dual Choice™ Cooking Element (on some models)

The Dual Choice™ Cooking Element offers flexibility depending on the size of the cookware. Single size can be used in the same way as a regular element. The dual size combines both the single and outer element and is recommended for larger size cookware.

A

C

■

■

■

■

■

A. Surface cooking area

B. Cookware/canner

C. ½" (1.3 cm) maximum overhang

Use flat-bottomed cookware for best heat conduction and energy efficiency. Cookware with rounded, warped, ribbed or dented bottoms could cause uneven heating and poor cooking results.

Determine flatness by placing the straight edge of a ruler across the bottom of the cookware. While you rotate the ruler, no space or light should be visible between it and the cookware.

Cookware designed with slightly indented bottoms or small expansion channels can be used.

Make sure the bottoms of pots and pans are clean and dry before using them. Residue and water can leave deposits when heated.

To avoid damage to the cooktop, do not cook foods directly on the cooktop.

Ceramic Glass Cooktop Cleaning

Clean the cooktop after each use to help avoid scratches, pitting, abrasions and to condition the glass surface. Ceramic glass cooktop cleaner and a cooktop scraper are also recommended for stubborn soils. Do not use abrasive cleaners, cleaning pads or harsh chemicals for cleaning. The Cooktop Care Kit Part Number

31605 contains all of the items needed to clean and condition your ceramic glass cooktop. Refer to the “Range Care” section for additional information.

IMPORTANT: To avoid permanent damage to the cooktop surface and to make soils easier to remove, clean the cooktop after each use to remove all soils.

Cooktop On Indicator Light

The Cooktop On indicator light is located on the console panel.

When any control knob on the console panel is turned on, the

Cooktop On indicator light will glow.

Hot Surface Indicator Light (on some models)

On ceramic glass models, the hot surface indicator light is located on the console panel.

The hot surface indicator light will glow as long as any surface cooking area is too hot to touch, even after the surface cooking area is turned off.

A

A

A. Dual

B. Single

Triple-Choice Cooking Element (on some models)

The Triple-Choice Cooking Element offers flexibility depending on the size of the cookware. Single size can be used in the same way as a regular element. The dual and triple sizes combine single, dual and outer elements and are recommended for larger size cookware, large quantities of food, and home canning.

B

A. Single

B. Dual

C. Triple

B

C

Power™ Element Cooking Zone (on some models)

The Power™ Element Cooking Zone offers flexibility for 2 optional heating choices. The High heat option can be used to boil liquids faster. The Melt option can be used to prepare sauces, to brown or saute foods and to keep food at a low temperature. Use cookware appropriate in size for the Power™ Element Cooking Zone.

A B

A. Melt option

B. High heat option

6

Warming Center Element

WARNING

Food Poisoning Hazard

Do not let food sit for more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

■

■

■

Cover all foods with a lid or aluminum foil. When warming baked goods, allow a small opening in the cover for moisture to escape.

To avoid damage to the cooktop, do not use plastic wrap to cover food because the plastic wrap may melt.

Use pot holders or oven mitts to remove food.

Use the Warming Center element to keep cooked foods warm.

One hour is the recommended maximum time to maintain food quality.

Do not use it to heat cold foods.

The Warming Center element can be used alone or when any of the other surface cooking areas are being used.

The Warming Center element area will not glow red when cycling on. However, the Element On light will glow while the Cooktop

Warming Center element is in use.

■

Use only cookware recommended for oven and cooktop use.

To Use:

1. To turn on, press WARMING CENTER push button.

2. To turn off, press WARMING CENTER push button a second time.

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides and a wellfitting lid, and the material should be of medium-to-heavy thickness.

Rough finishes may scratch the cooktop. Aluminum and copper may be used as a core or base in cookware. However, when used as a base they can leave permanent marks on the surfaces.

Cookware material is a factor in how quickly and evenly heat is transferred, which affects cooking results. A nonstick finish has the same characteristics as its base material. For example, aluminum cookware with a nonstick finish will take on the properties of aluminum.

Cookware with nonstick surfaces should not be used under the broiler.

Check for flatness by placing the straight edge of a ruler across the bottom of the cookware. While you rotate the ruler, no space or light should be visible between it and the cookware.

Use the following chart as a guide for cookware material characteristics.

COOKWARE CHARACTERISTICS

Aluminum

Cast iron

■

■

■

■

■

■

■

■

Heats quickly and evenly.

Suitable for all types of cooking.

Medium or heavy thickness is best for most cooking tasks.

May leave aluminum residues, which may be diminished if cleaned immediately after cooking.

Heats slowly and evenly.

Good for browning and frying.

Maintains heat for slow cooking.

Rough edges or burrs may scratch the cooktop.

1

2

1

3

4

2

5

6

7

3

8

9

4

1 0

1 1

1 2

5

1 3

1 4

6

1 5

1 6

1 7

7

1 8

1 9

2 0

Ceramic or

Ceramic glass

Copper

■

■

■

■

■

■

■

Follow manufacturer’s instructions.

Heats slowly, but unevenly.

Ideal results on low to medium heat settings.

May scratch the cooktop.

Heats very quickly and evenly.

May leave copper residues, which may be diminished if cleaned immediately after cooking

Can leave a permanent stain or bond to the cooktop if overheated.

Earthenware

■

Follow manufacturer’s instructions.

■

■

Use on low heat settings.

May scratch the cooktop.

Porcelain enamel-onsteel or cast iron

Stainless steel

■

■

■

■

See stainless steel or cast iron.

Porcelain enamel bakeware without the metal base may bond to the cooktop if overheated.

Heats quickly, but unevenly.

A core or base of aluminum or copper on stainless steel provides even heating.

7

Use flat-bottomed cookware for best cooking results and energy efficiency. The cookware should be about the same size as the cooking area outlined on the cooktop. Cookware should not extend more than ½" (1.3 cm) outside the area.

Home Canning

Canning can be performed on a glass smooth top cooking surface or traditional coil element cooktop. When canning for long periods, alternate the use of surface cooking areas or elements between batches. This allows time for the most recently used areas to cool.

■

Center the canner on the largest surface cooking area or element. On electric cooktops, canners should not extend more than ½" (1.3 cm) beyond the surface cooking area or element.

■

■

■

Do not place canner on 2 surface cooking areas or elements at the same time.

On ceramic glass models, use only flat-bottomed canners to avoid damage to the cooktop and elements.

For more information, contact your local agricultural extension office, or refer to published home canning guides. Companies that manufacture home canning products can also offer assistance.

OVEN USE

Odors and smoke are normal when the oven is used the first few times, or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well-ventilated room.

Electronic Oven Controls

Control Display

The display will flash when powered up or after a power loss. Press

CANCEL to clear. When oven is not in use, the time of day is displayed, unless the range is in Energy Save mode. During Energy

Save mode, the display will be blank. Indicator lights show functions that are in use.

Tones

Tones are audible signals, indicating the following:

Basic Functions

One tone

■

Valid pad press

■

■

Oven is preheated (long tone)

Function has been entered

■

Reminder (on some models), repeating every 20 seconds after the end-of-cycle tones

Three tones

■

Invalid pad press

Four tones

■

End of cycle

Energy Save

The Energy Save feature places the control and clock into a Sleep mode that reduces power consumption when the range is not being used.

To enter the Energy Save mode, the oven and control must be idle with the time of day shown on the display. Press and hold CLOCK for 10 seconds. The control will beep, and the display will show the letters “ES” followed by “On” twice. The display will return to the time of day.

If Energy Save mode is activated, each time the range is idle for

5 minutes with only the time of day shown, the display will show the letters “ES” followed by “On” twice. The display will then be blank until a control key is pressed or the oven door is opened. The control will then perform any of its operations in response to additional key presses.

To exit Energy Save mode, press and hold the CLOCK key for

10 seconds. The control will beep, and the display will show the letters “ES” followed by “Off” twice. The display will return to the time of day.

8

Oven Temperature Control

IMPORTANT: Do not use a thermometer to measure oven temperature because opening the oven door may cause element cycling to give incorrect readings.

The oven provides accurate temperatures; however, it may cook faster or slower than your previous oven, so the temperature can be adjusted to personalize it for your cooking needs. It can be changed in Fahrenheit or Celsius.

To Adjust Oven Temperature:

1. Press and hold BAKE for 5 seconds until the oven display shows the current setting, for example “0°F CAL” or “00.”

2. Press the Temp/Time “+” or “-” keypads to increase or to decrease the temperature in 10°F (5°C or 6°C) amounts. The adjustment can be set between 30°F (17°C) and -30°F (-17°C).

3. Press START.

Options Mode

Press and hold KITCHEN TIMER for 5 seconds, and “Opt” will appear. Use the Temp/Time “+” or “-” keypads to cycle through the following options. Press CANCEL to exit the mode.

Fahrenheit and Celsius

The temperature is preset at Fahrenheit, but can be changed to

Celsius. Press KITCHEN TIMER to toggle between Fahrenheit and

Celsius. Press CANCEL to exit.

End of Cycle Tones

“b1” (beep once) or “b” (continue to beep) will be displayed. Press

KITCHEN TIMER to toggle through selections. Press CANCEL to exit.

Oven Light with Door Open

“LOn” indicates that the oven light will turn on when the door is open. If “LOFF” is displayed, the oven light will turn on only with the oven light switch. Press KITCHEN TIMER to toggle through selection. Press CANCEL to exit.

12-Hour Shutoff

If “12 Hr” is displayed, the oven will automatically shut off after

12 hours. Press KITCHEN TIMER to toggle to “- Hr” to disable the

12-hour shutoff. Press CANCEL to exit.

The Sabbath Mode sets the oven to remain on in a Bake setting until turned off. A Timed Bake can also be set to keep the oven on for only part of the Sabbath. The Oven Control Lockout Feature (if present) will be disabled during the Sabbath Mode. After the

Sabbath Mode is set no tones will sound, the display will not show the temperature, the Kitchen Timer Mode will be canceled (if active) and only the following pads will function:

■

“+” or “-” keypads

■

Cancel

Sabbath Mode

To set a Timed Bake using Sabbath Mode

(on some models):

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before or after cooking.

When the oven door is opened or closed, the oven light will not turn on or off and the heating elements will not turn on or off immediately.

When power is restored after a power failure, the oven will return to

Sabbath Mode and remain Sabbath compliant with the bake elements off until the Cancel keypad is pressed.

Pressing the Cancel keypad at any time returns the oven to the normal cooking mode (not Sabbath Mode compliant).

Before entering the Sabbath Mode, it must be decided if the oven light is to be on or off for the entire Sabbath Mode period. If the light is on when entering Sabbath Mode, it will remain on for the entire time Sabbath Mode is in use. If the light is off when entering

Sabbath Mode, it will remain off for the entire time Sabbath Mode is in use. Opening the oven door or pressing the Oven Light keypad will not affect the oven light once Sabbath Mode has been entered.

If the oven has the Convection Bake feature, the oven light is controlled by a separate Oven Light switch on the console. If the oven light is on when entering the Sabbath Mode, it will remain on for the entire time Sabbath Mode is in use. For the oven light to be off during the Sabbath Mode, the light bulb must be removed from the oven prior to entering the Sabbath Mode. Not performing these steps will cause the oven light to turn on when the oven door is opened, resulting in the oven being not Sabbath compliant.

Doing so can result in food poisoning or sickness.

1. Press BAKE.

2. Press the “+” or “-” keypads to enter a temperature other than the one displayed.

3. Press COOK TIME. The Cook Time oven indicator light will light up.

4. Press the “+” or “-” keypads to enter a cook time length.

5. Press START.

6. Press and hold the TIMER keypad for 5 seconds. “SAb” will flash in the display.

7. Press START within 5 seconds to enter Sabbath Mode; otherwise, the entire cycle cancels out. “SAb” will stop flashing and remain on in the display. The oven is now in Sabbath Mode and is Sabbath compliant. The Bake, On and Cook Time indicator lights will be displayed.

When the set cook time ends, the oven will shut off automatically and the indicator lights will turn off, indicating the end of the cycle.

Pressing the Cancel keypad at any time returns the oven to the normal cooking mode (not Sabbath Mode compliant).

On the Holiday, the oven temperature can be changed once the oven is in Sabbath Mode by pressing the “+” or “-” keypads. The oven temperature will change 25°F (14°C) each time the keypad is pressed. The display will not change, and there will be no sounds during this adjustment.

To Bake Using Sabbath Mode:

1. Press BAKE.

2. Press the “+” or “-” keypads.

3. Press START.

4. Press and hold the TIMER keypad for 5 seconds. “SAb” will flash in the display.

5. Press START within 5 seconds to enter Sabbath Mode; otherwise, the entire cycle cancels out. “SAb” will stop flashing and remain on in the display. The oven is now in Sabbath Mode and is Sabbath compliant.

Pressing the Cancel keypad at any time returns the oven to the normal cooking mode (not Sabbath Mode compliant).

To set a Delayed Timed Bake using Sabbath Mode

(on some models):

1. Press BAKE.

2. Press the “+” or “-” keypads to enter a temperature other than the one displayed.

3. Press COOK TIME. The Cook Time oven indicator light will light up.

4. Press the “+” or “-” keypads to enter a cook time length.

5. Press START TIME or DELAY START. The Start Time/Delay

Start indicator light will light up.

6. Press the “+” or “-” keypads to enter a start time.

7. Press START.

8. Press and hold the TIMER keypad for 5 seconds. “SAb” will flash in the display.

9. Press START within 5 seconds to enter Sabbath Mode; otherwise, the entire cycle cancels out. “SAb” will stop flashing and remain on in the display. The oven is now in Sabbath Mode and is Sabbath compliant. The On and Delay indicator lights will be displayed.

When the start time is reached the Bake, On and Cook Time indicator lights will automatically turn on. When the set cook time ends, the oven will shut off automatically and the indicator lights will turn off, indicating the end of the cycle.

Pressing the Cancel keypad at any time returns the oven to the normal cooking mode (not Sabbath Mode compliant).

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom finish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire oven rack with foil because air must be able to move freely.

9

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain finish, do not place food or bakeware directly on the oven door or bottom.

*If your model has a Max Capacity Oven Rack, the recessed ends must be placed in the rack position above the desired position of the food. See the following illustration.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow 2"

(5 cm) of space around bakeware and oven walls. Make sure that no bakeware piece is directly over another.

Racks

■

Position racks before turning on the oven.

■

■

Do not move racks with bakeware on them.

Make sure racks are level.

To move a rack, pull it out to the stop position, raise the front edge, and then lift out. Use the following illustration and charts as a guide.

A

B

7

6

5

4

3

2

1

The oven has 7 positions for a flat rack, as shown in the previous illustration and the following table.

Flat Rack Position* Type of Food

7 Broiling/searing meats, hamburgers, steaks

Broiled meats, poultry, fish 6

3 or 4

2

1

Most baked goods, casseroles

Roasted meats

Large roasts or poultry

For hamburger patties to have a well-seared exterior and a rare interior, use rack position 7. Side 1 should cook for approximately

2½ - 3½ minutes. Side 2 should cook for approximately

4-5 minutes. Expect a moderate degree of smoke when broiling.

A. Ends of rack in position 3

B. Food in position 2

IMPORTANT: These rack positions are for flat racks. If a Max

Capacity Oven Rack is used, the rack position must be adjusted as shown in the previous figure.

Multiple Rack Cooking

2-rack (non-convection): Use rack positions 2 and 5.

2-rack (convection): Use rack positions 2 and 5.

Baking Cookies and Layer Cakes on 2 Racks

Baking Layer Cakes

For best results when baking cakes on 2 racks, use the Bake function and racks 2 and 5. Place the cakes on the racks as shown.

Baking Cookies

For best results when baking cookies on 2 racks, use the Bake function and rack positions 2 and 5.

A

Oven Vent

The oven vent releases hot air and moisture from the oven, and should not be blocked or covered. Blocking or covering the oven vent will cause poor air circulation, affecting cooking and cleaning results. Do not set plastics, paper or other items that could melt or burn near the oven vent.

A. Oven vent

Baking and Roasting

Precision Cooking™ System - Precise Bake

The Precise Bake system electronically regulates the oven heat levels during preheat and bake to maintain a precise temperature range for optimal cooking results. The bake and broil elements cycle on and off in intervals. The bake element will glow red when cycling on; the broil element will not. This feature is automatically activated when the oven is in use.

Preheating

When Start is pressed, the oven will begin preheating. Once 100ºF

(38ºC) is reached, the display temperature will increase as the actual temperature of the oven increases. When the preheat temperature is reached, a tone will sound, and the selected temperature will appear on the display.

The time to preheat the oven to 350°F (175°C) will be approximately 10-15 minutes depending upon the model.

Before baking and roasting, position racks according to

“Positioning Racks and Bakeware” section. When roasting, it is not necessary to wait for the oven preheat cycle to end before putting food in unless it is recommended in the recipe.

10

Broiling

Leave the door open 6" (15 cm) at the broil stop position to ensure proper broiling temperature. Preheat the oven for 5 minutes before putting food in unless recommended otherwise in the recipe.

Position food on grid in a broiler pan, then place it in the center of the oven rack.

Changing the temperature when broiling allows more precise control when cooking. The lower the broil setting, the slower the cooking. Thicker cuts and unevenly shaped pieces of meat, fish and poultry may cook better at lower broil settings. Use racks 6 or

7 for broiling. Refer to the “Positioning Racks and Bakeware” section for more information.

On lower settings, the broil element will cycle on and off to maintain the proper temperature.

■

For best results, use a broiler pan and grid. It is designed to drain juices and help avoid spatter and smoke.

If you would like to purchase a broiler pan, one may be ordered.

Please refer to the “Accessories” section for more information.

NOTE: Odors and smoke are normal the first few times the oven is used or if the oven is heavily soiled.

Convection Baking and Roasting

(on some models)

In a convection oven, the fan-circulated hot air continually distributes heat more evenly than the natural movement of air in a standard thermal oven. This movement of hot air helps maintain a consistent temperature throughout the oven, cooking foods more evenly, crisping surfaces while sealing in moisture and yielding crustier breads.

With convection cooking, most foods can be cooked at a temperature 25°F (15°C) lower than in a standard thermal oven, and cooking time can be shortened by up to 30%.

During convection baking or roasting, the bake and broil elements cycle on and off in intervals to maintain the oven temperature, while the fan circulates the hot air.

If the oven door is opened during convection baking or roasting, the fan will turn off immediately. It will come back on when the oven door is closed.

WARNING

Food Poisoning Hazard

Timed Cooking

(on some models)

To Set a Delayed Timed Cook:

Before setting, make sure the clock is set to the correct time of day.

See the “Clock” keypad feature in the “Feature Guide” section.

1. Press BAKE.

Do not let food sit in oven more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

To Set a Timed Cook:

1. Press BAKE. The bake indicator light will light up.

2. Press the TEMP/TIME “+” or “-” keypads to enter a temperature other than the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light up.

4. Press the TEMP/TIME “+” or “-” keypads to enter the length of time to cook.

5. Press START. The display will count down the time. When the time ends, the oven will shut off automatically and “End” will appear on the display.

6. Press CANCEL to clear the display.

2. Press the TEMP/TIME “+” or “-” keypads to enter a temperature other than the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light up.

4. Press TEMP/TIME “+” or “-” keypads to enter the length of time to cook.

5. Press DELAY START. The delay oven indicator light will light up.

6. Press TEMP/TIME “+” or “-” keypads to enter the time of day to start.

7. Press START.

When the start time is reached, the oven will automatically turn on. The temperature and/or time settings can be changed anytime after pressing Start by repeating steps 1-7. When the set cook time ends, the oven will shut off automatically and

“End” will appear on the display.

8. Press CANCEL to clear the display.

11

RANGE CARE

Clean Cycle

6. Remove the residual water and loosened soils with a sponge or cloth immediately after the Clean cycle is complete. Much of the initial 2 cups (16 oz [500 mL]) of water will remain in the oven after the cycle is completed. If additional soils remain, leave a small amount of water in the oven bottom to assist with the cleaning.

AquaLift

®

Technology is an innovative cleaning solution that utilizes heat and water to release baked-on spills from the oven in less than

1 hour. This new cleaning technology is a low-heat, odor-free alternative to traditional self-cleaning options.

Allow the oven to cool to room temperature before using the Clean cycle. If your oven cavity is above 200°F (93°C), “HOT” will appear in the display, and the Clean cycle will not be activated until the oven cavity cools down.

To Clean:

1. Remove all racks and accessories from the oven cavity and wipe excess soil. Use a plastic scraper to remove easilyremoved soils.

2. Pour 2 cups (16 oz [500 mL]) of distilled or filtered water onto the bottom of the empty oven and close the oven door.

IMPORTANT: Do not use chemicals or other additives with the water. Do not open the oven door during the Clean cycle. The water on the oven bottom is hot.

3. Press CLEAN and then START on the oven control panel.

4. Allow 40 minutes for cleaning and cool down. A beep will sound when the Clean cycle is complete.

5. Press CANCEL at the end of the cycle. CANCEL may be pressed at any time to stop the Clean cycle.

7. If any soils remain, remove them with a non-scratch scrubbing sponge or plastic scraper. Additional Clean cycles may be run to help remove the stubborn soils.

IMPORTANT: Do not use oven cleaners. The use of chemicals, including commercial oven cleaners or metal scouring pads, may cause permanent damage to the porcelain surface of the oven interior.

NOTES:

■

The range should be level to ensure that the entire surface of the bottom of the oven cavity is covered by water at the beginning of the Clean cycle.

■

■

■

■

■

■

■

■

For best results, use distilled or filtered water. Tap water may leave mineral deposits on the oven bottom.

Before removing the residual water and loosened soils at the end of the Clean cycle, insert a cloth or paper towel between the lower edge of the oven door and the front frame to keep water from spilling onto the front of the range and the floor.

Soil baked on through several cooking cycles will be more difficult to remove with the Clean cycle.

Nonabrasive scrub sponges or eraser style cleaning pads

(without cleaners) can be effective for cleaning the oven cavity walls, oven door and oven bottom for difficult soils. For best results, moisten the pads and sponges before use.

Run an additional Clean cycle for stubborn soils.

affresh

®

Kitchen Appliance Cleaner and affresh

®

Cooktop

Cleaner may be used to clean the oven bottom, walls and door when the oven has finished the cycle and returned to room temperature. If affresh ® Cooktop Cleaner is used, it is recommended to wipe out the cavity with distilled water as well. Refer to the “Accessories” section for information on ordering.

Additional AquaLift

®

Technology Cleaning Kits may be obtained by ordering Part Number W10423113RP. See the

“Accessories” section for more information.

For assistance with AquaLift

®

Technology, call

1-877-258-0808, or visit our website at http://whr.pl/aqualift.

12

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Always follow label instructions on cleaning products. For additional information, you can visit the

Frequently Asked Questions (FAQs) section of our website at

www.maytag.com.

Soap, water and a soft cloth or sponge are suggested first unless otherwise noted.

Burned-on soil

■ affresh ® Cooktop Cleaner or nonabrasive cleanser with

Cooktop Cleaning Pads:

Clean as soon as cooktop has cooled down. Rub product into soil with a Cooktop Cleaning Pad. Continue rubbing until white film disappears.

Metal marks from aluminum and copper

EXTERIOR PORCELAIN ENAMEL SURFACES

(on some models)

Food spills containing acids, such as vinegar and tomato, should be cleaned as soon as the entire range is cool. These spills may affect the finish.

Cleaning Method:

■ affresh

®

Cooktop Cleaner and Cooktop Cleaning Pads:

Clean as soon as cooktop has cooled down. Rub product into surface with a Cooktop Cleaning Pad. Continue rubbing until white film disappears. The marks will not totally disappear, but after many cleanings they will become less noticeable.

■

■

Glass cleaner, mild liquid cleaner or nonabrasive scrubbing pad:

Gently clean around the model and serial number plate because scrubbing may remove numbers.

affresh ® Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

Tiny scratches and abrasions

■ affresh ® Cooktop Cleaner and Cooktop Cleaning Pads:

Clean as soon as cooktop has cooled down. Rub product into surface with a Cooktop Cleaning Pad. Continue rubbing until white film disappears. Scratches and abrasions do not affect cooking performance, and after many cleanings they will become less noticeable.

COOKTOP CONTROLS

To avoid damage to the cooktop controls, do not use steel wool, abrasive cleansers or oven cleaner.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner, steel-wool pads, gritty washcloths or abrasive paper towels.

Damage may occur to stainless steel surfaces, even with one-time or limited use.

Cleaning Method:

Rub in direction of grain to avoid damaging.

■ affresh ® Stainless Steel Cleaner Part Number W10355016:

See the “Accessories” section for more information.

To avoid damage, do not soak knobs.

When replacing knobs, make sure knobs are in the Off position.

On some models, do not remove seals under knobs.

Cleaning Method:

■

Soap and water:

Pull knobs straight away from control panel to remove.

CONTROL PANEL AND OVEN DOOR EXTERIOR

■

Liquid detergent or all-purpose cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

To avoid damage to the control panel, do not use abrasive cleaners, steel-wool pads, gritty washcloths or abrasive paper towels.

Cleaning Method:

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust removers, ammonia or sodium hydroxide (lye) because paint surface may stain.

■

■

Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on panel.

affresh

®

Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

CERAMIC GLASS (on some models)

Cleaning Method:

Use affresh

®

Cooktop Cleaner Part Number W10355051, Cooktop

Cleaning Pads Part Number W10391473 and Cooktop Scraper

Part Number WA906B to clean and remove stains from the cooktop. Use Cooktop Protectant Part Number 31463A regularly to avoid stain buildup, pitting and scratching, while conditioning the cooktop for easier future cleaning. These can be ordered as accessories. See the “Accessories” section for more information.

The Cooktop Scraper uses razor blades. Store razor blades out of the reach of children.

Do not use steel wool, abrasive powder cleansers, chlorine bleach, rust remover or ammonia because damage may occur.

Light to moderate soil

■

Can be cleaned with damp paper towels or sponge. Light stains should be addressed with cleaner and cleaning pad.

OVEN RACKS

Cleaning Method:

■

Steel-wool pad

■

For racks that have discolored and are harder to slide, a light coating of vegetable oil applied to the rack guides will help them slide.

STORAGE DRAWER OR WARMING DRAWER (on some models)

Check that storage drawer or warming drawer is cool and empty before cleaning.

Cleaning Method:

■

Mild detergent

Sugary spills (jellies, candy, syrup)

■

Cooktop Scraper:

Scrape off sugary spills while the cooktop is still warm. You may want to wear oven mitts while cleaning the cooktop.

■

OVEN CAVITY

Use AquaLift ® Technology regularly to clean oven spills.

Do not use oven cleaners.

Heavy soil, dark streaks, specks and discoloration

■ affresh ® Cooktop Cleaner and Cooktop Cleaning Pads:

Clean as soon as cooktop has cooled down. Rub product into surface with a Cooktop Cleaning Pad. Continue rubbing until white film disappears.

Clean with Cooktop Cleaner or nonabrasive cleaner and cleaning pad.

Food spills should be cleaned when oven cools. At high temperatures, foods react with porcelain and staining, etching, pitting or faint white spots can result.

Cleaning Method:

■

Clean cycle:

See “Clean Cycle” first.

13

The oven light is a standard 40-watt appliance bulb. Before replacing, make sure the oven and cooktop are cool and the control knobs are in the off position.

To Replace:

1. Unplug range or disconnect power.

Oven Light

2. Turn the glass bulb cover in the back of the oven counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb, then bulb cover by turning clockwise.

5. Plug in range or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions) to possibly avoid the cost of a service call.

www.maytag.com

Operation

PROBLEM

Nothing will operate

Cooktop will not operate

Excessive heat around cookware on cooktop

Cooktop cooking results not what expected

Oven will not operate

Oven temperature too high or too low

Oven indicator lights flash

Display shows messages

Clean cycle did not work on all spills

POSSIBLE CAUSES SOLUTIONS

Power supply cord is unplugged.

Plug into a grounded outlet.

ENERGY SAVE is active, and the display is blank.

Household fuse is blown, or a circuit breaker is tripped.

The control displays an F9 or F9

E0 error code.

Press any key on the control to display the Time of Day. See the

“Electronic Oven Controls” section for more information.

Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

The electrical outlet in the home may be miswired. Contact a qualified electrician to verify the electrical supply.

Push in knob before turning to a setting.

The control knob is not set correctly.

On ceramic glass models, the oven control lockout is set.

Cookware is not the proper size.

See the control lock keypad feature in the “Feature Guide” section.

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than

¹⁄₂" (1.3 cm) outside the cooking area.

See “Cooktop Use” section.

Control knob set to incorrect heat level

Range is not level.

Delay start is set.

Control lock is on.

Level the range. See the Installation Instructions.

See “Timed Cooking” section.

Press and hold START for 3 seconds to unlock.

Press and hold DELAY START for 10 seconds.

See “Electronic Oven Controls” section.

Control is in Demo Mode.

Electronic oven control set incorrectly

Oven temperature needs adjustment.

Power to range is turned on or restored.

Power failure (display shows flashing time)

Error code (display shows letter followed by number)

Start needs to be pressed so a cycle can begin (display shows

“PUSH” or “PSH”).

Several cooking cycles between

Clean cycles or spills on oven walls and doors.

See “Oven Temperature Control” in the “Electronic Oven

Controls” section.

See “Control Display” in the “Electronic Oven Controls” section. If the indicator lights keep flashing, call for service. See cover for contact information.

Clear the display. On some models, reset the clock, if needed.

See “Clock” keypad feature in the “Feature Guide” section.

Depending on your model, press CANCEL to clear the display.

See “Control Display” in the “Electronic Oven Controls” section. If it reappears, call for service. See cover for contact information.

See the “Start” keypad feature in the “Feature Guide” section.

Run additional Clean cycles. Use the AquaLift

Cleaning Kit. Use affresh affresh ® more information.

®

® Technology

Kitchen and Appliance Cleaner or

Cooktop Cleaner. See the “Accessories” section for

14

PROBLEM

Mineral deposits are left on the oven bottom after the Clean cycle

Oven cooking results not what expected

POSSIBLE CAUSES

Tap water was used in the Clean cycle.

Range is not level.

SOLUTIONS

Use distilled or filtered water in the Clean cycle.

To remove deposits, use a cloth soaked with vinegar. Then use a cloth dampened with water to thoroughly remove any vinegar residue.

Mineral deposits will collect on dry areas of the oven bottom during the Clean cycle. Level the range. See the Installation

Instructions.

To remove deposits, use a cloth soaked with vinegar. Then use a cloth dampened with water to thoroughly remove any vinegar residue.

Range is not level.

The temperature set was incorrect.

Oven temperature needs adjustment.

Oven was not preheated.

Racks were positioned improperly.

Darker browning of food caused by dull or dark bakeware

Level the range. See the Installation Instructions.

Double-check the recipe in a reliable cookbook.

See “Oven Temperature Control” in the “Electronic Oven

Controls” section.

Not enough air circulation around bakeware.

See “Positioning Racks and Bakeware” section.

Batter distributed unevenly in pan Check that batter is level in the pan.

Lighter browning of food caused by shiny or light colored bakeware

Incorrect length of cooking time was used.

See “Baking and Roasting” section.

See “Positioning Racks and Bakeware” section.

Lower oven temperature 25°F (15°C) or move rack to a higher position in the oven.

Move rack to a lower position in the oven.

Adjust cooking time.

Oven door was not closed.

Oven door was opened during cooking.

Rack is too close to bake burner, making baked items too brown on bottom.

Pie crusts browning too quickly.

Be sure that the bakeware does not keep the door from closing.

Oven peeking releases oven heat and can result in longer cooking times.

Move rack to higher position in the oven.

Use aluminum foil to cover the edge of the crust and/or reduce baking temperature.

15

16

Cooktop Care Kit

(ceramic glass models)

(includes cleaner, protectant, scraper, and applicator pads)

Order Part Number 31605

Cooktop Protectant

(ceramic glass models)

Order Part Number 31463A

ACCESSORIES

For accessories, you can visit our website at www.maytag.com.

affresh

®

Stainless Steel Cleaner

(stainless steel models)

Order Part Number W10355016

affresh

®

Kitchen and Appliance

Cleaner

Order Part Number W10355010

Gas Grate and Drip Pan Cleaner

Order Part Number 31617A

Gourmet Griddle

Order Part Number 4396096RB

Standard Flat Oven Rack

Order Part Number W10179196

affresh

®

Stainless Steel Cleaning

Wipes

(stainless steel models)

Order Part Number W10355049

AquaLift

®

Technology Oven Cleaning

Kit

Order Part Number W10423113RP

Cooktop Scraper

(ceramic glass models)

Order Part Number WA906B

Split Oven Rack

Order Part Number W10205524

Max Capacity Oven Rack

Order Part Number W10289145

affresh

®

Cooktop Cleaner

(ceramic glass models)

Order Part Number W10355051

Granite Cleaner and Polish

Order Part Number W10275756

Porcelain Broiler Pan and Grid

Order Part Number 4396923

Cooktop Cleaning Pads

(ceramic glass models)

Order Part Number W10391473

Premium Broil Pan and Roasting Rack

Order Part Number W10123240 www.maytag.com/broilerpan

MAYTAG

®

ELECTRIC RANGE

LIMITED WARRANTY

ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED

TO OBTAIN WARRANTY SERVICE .

Please have the following information available when you call the

Customer eXperience Center:

■

■

■

■

Name, address and telephone number

Model number and serial number

A clear, detailed description of the problem

Proof of purchase including dealer or retailer name and address

IF YOU NEED SERVICE:

1.

Before contacting us to arrange service, please determine whether your product requires repair. Some questions can be addressed without service. Please take a few minutes to review the Troubleshooting or Problem Solver section of the Use and Care Guide, scan the QR code on the right to access additional resources, or visit https://www.maytag.com/product_help.

2.

All warranty service is provided exclusively by our authorized Maytag Service Providers . In the U.S. and

Canada, direct all requests for warranty service to:

Maytag Customer eXperience Center

https://www.maytag.com/ product_help

In the U.S.A., call 1-800-688-9900. In Canada, call 1-800-807-6777.

If outside the 50 United States or Canada, contact your authorized Maytag dealer to determine whether another warranty applies.

TEN YEAR LIMITED WARRANTY

WHAT IS COVERED WHAT IS NOT COVERED

FIRST YEAR LIMITED WARRANTY (PARTS AND LABOR)

For one year from the date of purchase, when this major appliance is installed, operated and maintained according to instructions attached to or furnished with the product, Maytag brand of

Whirlpool Corporation or Whirlpool Canada, LP (hereafter “Maytag”) will pay for factory specified replacement parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased.

SECOND THROUGH TENTH YEAR LIMITED WARRANTY

(CERTAIN COMPONENT PARTS ONLY -

LABOR NOT INCLUDED)

In the second through tenth years from the date of original purchase, when this major appliance is installed, operated and maintained according to instructions attached to or furnished with the product,

Maytag will pay for factory specified parts for the following components to correct non-cosmetic defects in materials or workmanship in these parts that prevent function of this major appliance and that existed when this major appliance was purchased. This is a limited 10-year warranty on the below named parts only and does not include repair labor.

■ Glass-Ceramic Cooktop (if due to thermal breakage)

■ Electric Surface Elements

■ Electric Bake/Broil Elements (Excludes Convection Element)

■ Cavity (Rust Through and Broken Welds Only)

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED

WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.

Service must be provided by a Maytag designated service company.

This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the country in which it was purchased. This limited warranty is effective from the date of original consumer purchase. Proof of original purchase date is required to obtain service under this limited warranty.

1.

Commercial, non-residential or multiple-family use, or use inconsistent with published user, operator or installation instructions.

2.

In-home Instruction on how to use your product.

3.

Service to correct improper product maintenance or installation, installation not in accordance with electrical or plumbing codes or correction of household electrical or plumbing (i.e. house wiring, fuses or water inlet hoses).

4.

Consumable parts (i.e. light bulbs, batteries, air or water filters, etc.).

5.

Conversion of your product from natural gas or L.P. gas.

6.

Damage from accident, misuse, abuse, fire, floods, acts of God or use with products not approved by Maytag.

7.

Repairs to parts or systems to correct product damage or defects caused by unauthorized service, alteration or modification of the appliance.

8.

Cosmetic damage including scratches, dents, chips, and other damage to appliance finishes unless such damage results from defects in materials and workmanship and is reported to Maytag within 30 days.

9.

Discoloration, rust or oxidation of surfaces resulting from caustic or corrosive environments including but not limited to high salt concentrations, high moisture or humidity or exposure to chemicals.

10. Food loss due to product failure.

11. Pick-up or delivery. This product is intended for in-home repair.

12. Travel or transportation expenses for service in remote locations where an authorized Maytag servicer is not available.

13. Removal or reinstallation of inaccessible appliances or built-in fixtures

(i.e. trim, decorative panels, flooring, cabinetry, islands, countertops, drywall, etc.) that interfere with servicing, removal or replacement of the product.

14. Service or parts for appliances with original model/serial numbers removed, altered or not easily determined.

The cost of repair or replacement under these excluded circumstances shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A

PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Maytag makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this major appliance, you should ask Maytag or your retailer about buying an extended warranty.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. MAYTAG

SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.

1/14

17

For additional product information, visit www.maytag.com.

If you do not have access to the Internet and you need assistance using your product or you would like to schedule service, you may contact us at the number below.

Have your complete model number ready. You can find your model number and serial number on the label, located on the oven frame behind the top right side of the oven door.

For assistance or service, call 1-800-688-9900.

If you need further assistance, you can write with any questions or concerns to the address below:

Maytag Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

Please keep these User Instructions and model number information for future reference.

18

Notes

19

W10667165A

SP PN W10671561A

® /™ ©2014. All rights reserved.

1/14

Printed in U.S.A.