Page: 51 | Catalog C-115 | South Bay Abrams

MEAT GRINDERS/TENDERIZER
TENDERIZER
Standard tenderizer knives cut deep into the
fresh meat to slice fibers and sinews. Just two
passes through makes a tender, eye appealing,
very saleable product from less expensive, harder
to merchandise cuts.
Standard knife rollers also become knitting
rollers by simply changing the stripper
position. “Knitting” cuts and bonds two pieces
of meat to form one.
• Motor shuts off
when safety cover
is raised
• On-Off toggle switch with
cover safety switch
• Stainless steel
case with
transparent Lexan safety cover
• Stainless steel cutting group,
spacers and comb
• Motor: 1/2 HP
• Dimensions: 161/2” w x 13” d x 16” h
• USDA accepted
PRO9SD . . . . . . . . . . . . . . . . . . . . . . . . . . Tenderizer
AUTOMATIC MIXER
GRINDER/CHOPPER
Compact mixer grinder built for high
productivity in ground meat operations
and sausage kitchens
•Finish: Stainless steel hopper and frame
tinned bowl, ring, worm and paddles
• Standard 5 HP, 220V, 3 phase motor*
• Transmission: Tandem single reduction
oil bath reducers, heavy duty mechanical
auger clutch
• Standard equipment:
Stainless steel splash
guard and ring wrench
• Hopper: 27” long,
up to 140 lbs. capacity
• Bowl assembly:
Uses No. 32 knives
and plates
• USDA approved
AFMG24 . . . . . . . . . . . . . . . . . . . . . . . Mixer Grinder
* Optional equipment at extra cost: Motor HP
and voltages, foot switch systems, adjustable
legs and casters, meat lug holder and feed
inlets.
w w w. s o u t h b ay a b r a m s . c o m
MEAT GRINDERS
• Stainless steel cabinet and pan
• Long life steel gear transmission
• Tin plated cast iron grinding head assembly
• Stomper included
KG12FS . . . . . . . . .
Meat Grinder, Uses No. 12 Knives and Plates
Motor: 3/4 HP, Single Phase, 110V
Pan Size: 203/4” x 123/4” x 21/2”
Overall: 123/4” x 221/2” d x 171/8” h
KG22W . . . . . . . . .
Meat Grinder, Uses No. 22 Knives and Plates
Motor: 1 HP, Single Phase, 110V
Pan Size: 29” x 161/4” x 3”
Overall: 16” x 29” d x 20” h
KG32MP . . . . . . . .
Meat Grinder, Uses No. 32 Knives and Plates
Motor: 3 HP, Single Phase, 220V
Pan Size: 36” x 21” x 3”
Overall: 21” x 40” d x 24” h
KG32 . . . . . . . . . . .
Meat Grinder, Uses No. 32 Knives and Plates
Motor: 3 HP, Three Phase, 220V
Pan Size: 36” x 21” x 3”
Overall: 21” x 40” d x 24” h
PRO-CUT*
TABLE MODELS
* Formerly
• Finish: Stainless steel case and tray
• Switch: Magnetic type with thermal overload protection
• Transmission: Heavy duty chain drive
• Standard equipment: Stainless steel splash guard, bowl guard, 11” legs,
stomper and ring wrench
BIRO
“346” Series
• Standard 3 HP motor (single or three phase)
• Feed pan: Removable stainless steel, 45” x 24” x 4”
(front) - 7” (back) deep
• Bowl assembly: Size 46 straight chute type (tinned)
• Uses No. 32 knives and plates
• USDA accepted
346SS1 . . . . . . . . . . . . . . . Meat Grinder, Single Phase Motor
346SS3 . . . . . . . . . . . . . . . Meat Grinder, Three Phase Motor
“552” Series
• Standard 5 HP motor (single or three phase)
• Feed pan: Stainless steel, 52” x 29” x 4”
(front) - 9” (back) deep
• Bowl assembly: Size 52 open type (tinned)
• Uses No. 52 knives and plates
• USDA accepted
552SS1 . . . . . . . . . . . . Meat Grinder, Single Phase Motor
552SS3 . . . . . . . . . . . . Meat Grinder, Three Phase Motor
TOLL FREE: (800) 852-2806
51