Sanitary Stainless Steel Housing Rev2005

Sanitary Stainless Steel Housing
ZenPure
ZenPure® sanitary stainless steel housings are designed for high
-purity applications. All wetted surfaces are constructed of
316L stainless steel and are electropolished, there by providing
excellent corrosion resistance. The housing comes in 5 inch to
30 inch sizes to meet the needs of your application.
The housing can support both Code 0 with 2-222 o-rings and
Code F, double open-ended filters. The design of the housing
provides for a positive seal with the filters, thereby preventing
fluid bypass. The unique design for Code F filters allows for
cost saving and ease of installation. The housing is sealed by
the use of an easy to use tri-clamp that requires no special tools
to open or close.
Materials of Construction
Head:
316L Stainless Steel
Bowl:
316L Stainless Steel
Clamp:
304 Stainless Steel
Center post with Seal plate: 316 Stainless Steal
Vent/ Drain Plug: 316L Stainless Steel
O-Rings: Silicone, EPDM
Dimensions (nominal)
Lengths: 5 in., 10 in., 20 in., 30 in.
Width: 5.51 in. (140mm)
Connections
Inlet/ Outlet : ½", 1", 1.5" sanitary fitting
Vent / Drain :½" sanitary, or welded valve
Finish
Electropolished
Operating Conditions
Max operating pressure: 145 psi (10Bar)
Applications
Solvents
Fine Chemicals
Ink Jets
Electronics
Plating Solutions
Process Water
Beverages
Parts Cleaning
Pharmaceuticals
Biologics
Dyes
Lacquers
ZenPure
Features
Benefits
■ Wide Chemical & Thermal Compatibility
■ Provides excellent compatibility with a wide range of
chemicals
■ The electropolished finish eliminates possible contamination
that could potentially leach into the process chemical.
■ Mounting
■ T-line housing can be supported by tripod legs, rigid tubing,
or wall-mounted bracket
■ Tri-Clamp
■ The housing allows for inspection of the filter before the
housing is sealed.
■ Ease of filter change-out
Rev 2009.11
ZenPure
Sanitary Stainless Steel Housing
1.5” TC
1
5
101.6 ±2
L
2
3
L2
4
L1
W
110
238
1.5” TC
211
Item Description
1
Bowl
2
Tri-Clamp
3
4
5
O-ring
Base
Valve
Material
316L SS
304 SS
EPDM/ Silicon/
Viton/ PTFE
316L SS
316L SS
Size
5,10,20,30"
4"
4"
1/2", 1", 1.5"
Nominal Length
5"
10"
20"
30"
L (T-Line)
182mm (7.16")
343mm (13.5")
597mm (23.5")
838mm (33.0")
L1 (In-Line)
226mm (8.9")
387mm (15.24")
641mm (25.24")
895mm (35.24")
L2 (In-Line)
238mm (9.37")
399mm (15.7")
653mm (25.7")
907mm (35.7")
W (In-Line)
135mm (5.31")
135mm (5.31")
135mm (5.31")
135mm (5.31")
Sanitary Stainless Steel Housing Ordering Guide
Housing
Construction
SH = Sanitary
Material
P = 316L
Cartridge #
Cartridge
Code
Length
01 = 1 Round
0 = 2-222
05 = 5"
A = ½" TC
7 = 2-226
10 = 10"
V = Welded
20 = 20"
valves
Housings
Vent/ Drain
Inlet/Outlet
Gasket
Materials
T = T-Line
A = 1/2" TC
E = EPDM
I = In-Line
B = 1" TC
S = Silicone
Body Style
C = 1.5" TC
30 = 30"
V = Viton
F = PTFE
ZenPure
40 = 40"
Example - 10" Sanitary T-line SS housing with Silicon gaslet for Code 0 filter with 1" TC connection - SHP01010ATBS
Please Visit Us At:
Your Local Distributor:
www.jalttechnologies.com
P.O. Box 597
Manassas, VA 20108
703-335-9910
JALT Technologies is a registered trademark of JALT Technologies, LLC. ZenPure
and PureFlo are registered trademarks of ZenPure Corporation or an affiliated company. Copyright 2003 ZenPure or an affiliated company. All rights reserved. Viton
is a registered trademark of DuPont Dow Elastomers.
Rev 2009.11